Cedar husk tiles. Application of pine nut shell. Cosmetic Recipes

Mother nature surrounded people's lives with numerous trees, shrubs, flowers, herbs. Among them there are no unnecessary, but many plants are edible, useful. For example, the famous cedar pine growing in Siberia has been feeding and healing for many centuries. local residents delicious little nuts. A grain of a nut is loved not only by squirrels, but by a shell pine nuts, the use of which does not leave the list of useful medical advice, is in the same great demand.

Useful properties of the nut shell

Pine nuts have long been considered a real treasure of the northern forest. Hiding in the scales of dense cones, they are filled with useful substances, patiently choose who to give health, good mood, extraordinary taste. Small grains click during a leisurely conversation. They make cedar oil, decoctions, tinctures. But with any processing, up to 60% of the nut mass of the useful shell remains. In ancient times, it was considered a valuable raw material recommended for the preparation of potions according to traditional medicine recipes.

Usage modern methods research has made it possible to study chemical composition shells. In many respects, it differs from the list of incoming elements and their quantity contained in nuts. The main percentage belongs to fiber. This is almost 70% of the mass fraction of a specific amount of shell. About 25% of various tannins, the so-called pentosans, 2% of proteins are almost as many fats. A small amount remains in the shell essential oils, trace elements, vitamins. A person could not simply throw away such wealth. Therefore, new technologies for the waste-free use of this unique gift of the forest have always been developed, allowing to preserve the following useful elements:

Tannins tannins. They are responsible for the appearance of anti-inflammatory, antimicrobial properties, which speed up the healing process of purulent wounds. These compounds form on the damaged surface protective film. Under it, the process of tissue repair is actively taking place. Healthy cells appear. The wound heals quickly. Phenomena of inflammation, bleeding do not appear.
High calcium content. Its shell contains almost twice as much as in the mass of cake left after obtaining oil from nuts. This fact makes it possible to use it for the treatment of complex diseases of the skeletal system and joints.
Vitamin C. The active participation of the vitamin in most biochemical processes of living organisms, for example, the synthesis of nucleic acids, the hematopoietic process, the production of collagen, steroid hormones, suggests that it is not superfluous. This is one of the reasons to save, use the vitamin accumulated in the hard shell of the nut. What's more, there's a lot of it left.
Content various trace elements large in the core. Not everyone stays in the shell. There is no need to look for iodine, strontium, cobalt, boron, which are found only in nuts.

Application

Use in traditional medicine

Decoctions, tinctures, containing pine nut shells, the use of which has long been known in small Siberian settlements, helped with many diseases. It:

Respiratory diseases, deafness, colds. Prolonged course of tonsillitis, rhinitis, prolonged runny nose. Chronic cough, asthma attacks.
Diseases of the kidneys, genitourinary system.
Women's diseases. Uterine fibroids, relief of pain in a severe menopause, difficult childbirth, uterine bleeding.
Diseases of the circulatory and lymphatic systems. Shell tinctures improve the ability of the necessary blood clotting, which is important during the treatment of leukemia, anemia.
Prevention of atherosclerosis. A large percentage of calcium in the shell, combined with vitamin C, lowers the percentage of dangerous cholesterol, well strengthens the walls of plaque-damaged vessels, small capillaries.
Joint diseases. With regular use of tinctures, water-salt processes are normalized. Bone tissue is effectively saturated with calcium, which alleviates attacks of gout, rheumatism of the joints, osteoporosis. Rubbing with tincture of alcohol is recommended for painful lumbago, sciatica. Baths are considered useful, in the water of which a decoction is added.
Disorders of the digestive system. The astringent, analgesic property of decoctions helps to detect peptic ulcer, dysbacteriosis, changes in the normal functioning of the intestine.
Prevention of the appearance of gallstone disease. Shell extract has a strong choleretic effect. This makes it possible to use it for cholecystitis, diseases of the liver, gallbladder.

Cosmetic Recipes

Usage folk ways treatment of various skin diseases, cosmetic problems with the use of the shell has long been known. Lotions in the form of dressings, compresses soaked in decoction, tincture help during the activation of herpes, exacerbation of eczema, abscesses, boils, diaper rash in babies, and other troubles. It is useful to use them in the following cases:

Treatment of lichen, burns, eczema. Three tablespoons, small shells, pour 300 ml of vodka or a 40% alcohol solution. After nine days, strain the tincture, make lotions, rinses. The same tincture is suitable for nail strengthening sessions.
Scrub for effective cleaning skin. It is easy to prepare it at home as follows. Take cereals, add shells crushed on a coffee grinder, pour boiling water, bringing to a state of creamy paste. Scrub is applied to the face, hands, aged for 20 minutes. The effect on the skin increases after the bath. Done once every week.
A decoction of cedar shells. The ancient method of destroying excess hair on the surface of the legs and arms is now considered a method that is not inferior in effect to modern methods of mechanical hair removal. It is necessary to pour three tablespoons of small shells with boiling water, boil for 20 minutes over low heat. Use hot. While bathing a child, a decoction can be added to the water to eliminate diaper rash and irritation on his skin.

Other uses of the shell

Use in gardening, landscape design

The small size of the plots does not allow growing a wonderful Siberian cedar pine tree. And the climatic conditions are not always suitable for this. Moreover, as shown Scientific research recent years, the chemical composition of nuts brought from the northernmost places where the tree grows is different. They accumulate more useful elements. But gardeners landscape designers, passionate about their work, have long been using the nut shell for their useful deeds. First of all it is:

Mulch. Original appearance, high-quality protective properties, a real bouquet of macro, microelements, useful for plants, made this type of mulch the most convenient, useful. Mulch is distinguished not only by its decorative qualities, but also prevents the soil from weeds, erosion, moisture loss, salinization, and the formation of a harmful crust. It can be placed in flower beds, in trunk circles garden trees, bushes. In winter, it plays the role of a protective material against deep freezing of the soil.
Biologically active system. The pine nut shell not only protects against excessive evaporation of moisture, weeds, temperature fluctuations, but also protects useful plants from fungal diseases harmful insects. Included in the chemical composition, lignin, phytoncides, flavanoids, create a special bactericidal microclimate around plants, which is absent in other types of mulch. Using this type of mulch, stimulate effective appearance earthworms, the creation of beneficial microflora at the root system. At the same time, useful properties are not lost for several years. During this time, just pour a little fresh chopped shell.
Coating garden paths. To do this, they dig a trench, partially fill it with gravel, and then lay a 10 cm layer of shell and ram it. During the rains, a beautiful shine and a unique smell of cedar appear. It is very pleasant to walk along such paths.

Every year, specialists offer new technological options for creating materials from any part of the cedar pine. This is a high-quality raw material for the manufacture of, for example, acetic acid, wood alcohol, special skin paint, acetone, but also a modern composite material cedroplast. Cone waste, together with the shell, combined with environmentally friendly cedar resin, turns into beautiful tiles used in construction, furniture production instead of chipboard, fiberboard, created using harmful formaldehyde resins. Cedroplast plates help increase efficiency, reduce fatigue, purify the air of harmful bacteria, protect against computer radiation, and provide many other benefits to a person. An analogue of this material in terms of a positive effect on human body no.

Peeling pine nuts

A small nut and a dash, I would like to say about the fruits of the cedar pine. The sizes of large specimens are only 10 mm, while small ones do not even reach 6 mm. From any of them you need to get valuable content. And preferably before use. Nuts peeled under industrial conditions should not be stored for a long time, although they can be bought and easily eaten, while losing the sacrament of the cleaning process during an interesting evening conversation. At the same time, you can enjoy the taste of a nut, collect a healthy shell, listen to the ancient customs of collecting a unique gift from the forest. For example, that cones are used only by those that themselves fall from the tree during the wind. Children collect them kind people. To get the nuts out of the cone, you need to rub it with your hands, knock on a hard object and the ripe fruits will easily fall out without much effort. In mass production conditions, special cone crushers and peelers are used. The cone crusher can be manual, mechanical. Most often, the device consists of a rotating drum, with fixed metal pins. The bumps are located between the wall and the pin. During rotation, nuts are quickly removed from them. The device of the peeler is quite simple. It consists of a fixed part and special grater, which is simply hit on the bump.

The process of removing the shell from a small grain is not so easy, simple, especially at home. Dentists do not recommend working with teeth. If teeth are used, then experts advise taking the nut by the top, and pressing on the weakest spot located in the middle of the nut. Tips to make shelling pine nuts easier:

Soaking in water. They should lie in it for about 20 hours. At the same time, the shell softens and is easier to remove from the nut even with teeth.
Scalding with boiling water. The procedure takes about 10 minutes.
Freezing. Cold nuts should be put in a bag or napkin and crushed with a hard object, such as a rolling pin.
Roasting. You can do this in the oven, in a pan for three minutes at a temperature of 120 degrees.
Smash with a hammer or use a garlic maker

In industry, the shell is removed using a cone crusher. Pre-heated nuts, slightly dried. During the cleaning process, the fruit kernels are sorted.

Scientific research does not allow us to say exactly when and from where this amazing cedar pine tree came into our world. What was it called different peoples. But the fact that the healing properties of all its parts were known, used in nutrition, treatment back in the days of the Sumerian kingdom is known and proven. A bowl with cedar resin, used in ancient rituals of initiation of kings, needles, nuts, cones, shells are of great value today.

How to choose pine nuts, see the video

Kedroplast is the working name of the new finishing material made from waste remaining from the processing of cedar cones. The product itself looks like an ordinary decorative facing tile, but, according to Anatoly Khromov, the inventor of cedroplast, it has a unique healing effect.

The appearance of cedroplast will please those who prefer to surround themselves with objects made from natural materials. Of course, mass production, and, consequently, the widespread use of cedroplast is not yet expected. Anatoly Khromov, like any nugget enthusiast, has to develop his business in dramatic collisions.

“If we describe the technology itself,” says the inventor, “it is quite simple. After peeling the pine nut, the husk of the cone remains, which is pressed under the influence of temperature. In this case, a tile is obtained that retains all the healing properties of the Siberian cedar resin. When I began to conduct the first experiments to obtain material, I tried to use pine and spruce cones, but top scores showed precisely cedar.

In 1996 I managed to write specifications necessary for the manufacture of tiles, and in 1998 a patent was registered for new material. He equipped the first production site in Novosibirsk, then moved to Berdsk. But familiar biologists advised to organize a workshop in the immediate vicinity of the place where raw materials were obtained, that is, closer to the cedar forest.

At first, the case, according to Khromov, went rather quickly. The program to launch the production of new material was presented to the head of the Yashkinsky district and approved by him. Translated into modern language this meant one thing: the head promised not to interfere. At his own expense, Khromov restored the building of an unfinished boiler house, installed equipment, launched the production of cedroplast, employing the local population. At the same time, in the nearest cedar forest, he organized an ecological tourism base - Moscow clerks came to Yashkino to breathe the taiga air and collected cones for Khromov.

Then, as usual, small and large troubles began. They began to try to copy Khromov's technology. Somewhere in Sheregesh, a competing company appeared, which began to produce cedroplast, of course, in violation of technology. Like any Russian entrepreneur, Khromov sued, went bankrupt and even burned. But he always found the strength to start over. At home, Khromov is also known as a major civil activist and a member of the Public Ecological Post, an organization dedicated to the multiplication and conservation of Russian cedar forests.

Today, on the basis of the technology created by Khromov, small-scale production of cedroplast has been established. It is produced as a tile for decoration. interior spaces, and in the form of small decorative panels that can be hung on the wall or placed near the emitting household appliances.

There is a technology for coating tiles and panels with environmentally friendly wax or resin (based on cedar resin) varnishes.

Khromov's product portfolio also includes therapeutic and prophylactic cabins made entirely of cedar plastic tiles. At the beginning of the year, Khromov's company managed to acquire its own showroom in Moscow - it is located in the Health Center pavilion at the All-Russian Exhibition Center. The inventor himself can also be found there. He will be happy to talk about the healing properties of the material.

“A lot has been said about the merits of cedar pine even without me,” Khromov comments, “but less and less is said about the fact that this wealth must be preserved. In the old days, children were punished for trampling grass in a cedar forest ahead of time set by nature. The cedar cone was collected only when it fell from the wind - carrion. Dry cedar or wood after the windblow was used.

Khromov also uses fallen cones in his production. The cedroplast invented by him is a composite wood material, which includes pine nut shell, pine cone husk and cedar resin as a binder.

According to the manufacturer, when facing dry walls, without high humidity, rooms with cedroplast tiles (at the rate of 1 sq. M tiles per 10 cubic meters of air in the room) increase efficiency, improve clarity of consciousness, reduce functional disorders of the body and fatigue. In addition, the amount of harmful bacteria in the surrounding air is reduced.

The invention relates to the production of decorative pressed products from tree waste. How to obtain decorative items from the waste of cedar cones by pressing under heating under pressure with exposure and fixing the surfaces of the product at room temperature. Pressing is performed by heating 120-130°C under a pressure of 100-125 kg/cm 2 . Surfaces are fixed under a load of 10-20 kg/m 2 for about 30 days. EFFECT: invention makes it possible to obtain decorative products with health-improving effect and high strength characteristics.

The invention relates to the production of decorative products from tree waste, and can be used in the technology of manufacturing facing tiles for cedar plastic cabins, for the manufacture of art panels and other decorative products of various geometric shapes.

A known method of obtaining decorative products from cone waste coniferous trees(RF patent No. 2235023, V44S 1/24, publ. 27.08.2004), which provides for preliminary stabilization of the waste in terms of moisture content at the level of 5-6%, the introduction of a polymer binder into them - a polyvinyl acetate dispersion in an amount of 12-15% of the dry weight of the base. The mixture obtained is subjected to drying at 80-90°C for 30 min and pressing is carried out when heated to 140-150°C under a pressure of 80-100 kg/cm 2 . To disadvantages this method include the need for pre-treatment of waste before pressing and the introduction of a polyvinyl acetate dispersion into their composition as a binder. The use of chemical ingredients in the composition of the product impairs the beneficial properties of facing tiles created by a natural product.

A known method for producing decorative items from waste cones of coniferous trees, (RF patent No. 2121925, V44C 1/24, publ. 11/20/1998), which consists in the fact that the husk of cedar cones is placed in a metal matrix and pressing is carried out when heated to 60-75 ° C under pressure 30-50 kg/cm 2 with exposure under pressure 8-12 min. After pressing, the front and back surfaces of the product are fixed without pressure and kept for 20-24 hours at room temperature.

The disadvantage of this method is to obtain finished products with low operational qualities, such as strength, water resistance, durability, because the structure of the products is loose, with air inclusions, and the finished products are subject to deformation and rather rapid destruction.

There is a known method for producing decorative products from waste cones of coniferous trees (RF patent No. 2229389, V44C 1/24, publ. wt.% in relation to the mass of raw materials. After drying, the resulting mass is poured into a metal matrix and pressed when heated at 150-170°C under a pressure of 20-40 kg/cm 2 with holding under a pressure of 1.1-1.7 min/mm of the product thickness. Next, the products are kept for 12 hours under a load of 100-150 kg/m 2 at room temperature. The method allows to obtain products with increased strength and water resistance.

The main disadvantage of this technology is the achievement of the strength properties of the resulting products due to the use of polymer compounds - polyvinyl acetate or its derivatives as a hardener, the processing of natural raw materials with which and their presence in the composition of the products negatively affect the healing properties of the product from cedar cones - cedroplast.

The objective of the invention is to obtain decorative products with a healing effect, with high strength and performance characteristics.

The problem is solved by the fact that when performing a method for obtaining decorative products from the waste of cedar cones by pressing under heating under pressure with exposure and fixing the front and back surfaces of the product at room temperature, it is proposed to perform pressing when heated to 120-130 ° C under a pressure of 100-125 kg /m 2 and fix surfaces under a load of 10-20 kg/m 2 for about 30 days.

As noted by experts (for example, RF patent No. 2235023), the content of natural resin (resin) in conifer cone waste is a difficult-to-control parameter that "precludes the possibility of optimizing the quantitative ratio of the binder in relation to the dry base." Those. The task of finding the conditions under which a natural binder would be sufficient to obtain high-quality products is quite complex and non-obvious.

The technology according to the proposed method solves this problem.

The essential difference of the method is the production of decorative products - plates or tiles of cedroplast - with a healing effect, which is not possessed by analogues of the proposed technology.

The technology makes it possible to produce material - "cedar plast", the composition of which includes only cedar components: cedar cone husk, pine nut shell, cone cores pressed in cedar resin - resin. All these elements of the composition emit a pronounced aroma of Siberian cedar. Cedroplast products are created increased concentration phytoncides, flavonoids, bornylacetates, etc. aromatic oils and resins that have a beneficial effect on human health.

To achieve the required qualities of the resulting products, pressing is carried out at lower temperatures and elevated pressure sufficient to release required amount binder - resin.

The proposed mode of pressing when heated to 120-130°C under a pressure of 100-125 kg/m 2 is optimal to achieve the required quality of products. Low temperature(120-130°C) impact on the raw material is sufficient for its molding and at the same time does not have a hard effect that worsens the protective and health-improving properties of cedar, i.e. does not destroy the ability to release phytoncides, flavonoids, and other aromatic substances in a significant concentration, creating a healing effect. At a lower temperature and pressure, the structure is loose, not strong enough, with increased water absorption during operation. Application more high temperatures and pressure can adversely affect the retention natural properties cedar.

Also, to preserve the natural properties of cedar and increase the strength characteristics, a long-term fixation of the surfaces of the product is carried out - for about one month under a pressure of 10-20 kg / m 2, during which the structure of the product is finally ordered and the required surface shape is fixed.

In addition, to relieve internal stresses in the product back side when pressed, it is formed in the form of a cellular structure, for example, by placing a grid with a honeycomb pattern on a metal matrix, on which the product is pressed. Without the use of such a mesh in the product, the formation of bulges and bends that reduce its quality is possible.

To increase moisture resistance and improve the appearance of products, they are coated with wax or varnish, which is made from cedar resin by dissolving it in a steam bath to a liquid state at a temperature of 50 ° C for 2 hours, mixing with alcohol in a ratio of 3: 1 and adding rosin in an amount of about 5% for crystallization and shine. Waxing or varnishing products protects them from moisture and other external influences improves appearance and performance.

The decorative qualities of products are improved by making drawings or ornaments on the front surface of products using various materials from cedar, such as wood chips, pieces of wood, nut shells and others, which are applied to the surface by application, inlay, relief pattern.

For the manufacture of facing tiles rectangular shape 200×250×10 mm in size, cone husks and pine nut shells were used as starting materials in the amount of 300-350 g. The sifted mass of raw materials is poured into a metal matrix, in which a metal mesh with a cellular pattern is placed. Thermopressing is carried out at 120-130°C under a pressure of 100-125 kg/m 2 with a small exposure under pressure - 3-5 minutes. To relieve the stresses that arise after pressing, the product is kept under pressure of 10-20 kg/m 2 for about 1 month. Finished goods covered with rosin varnish or wax. Get tiles with a smooth shiny surface Brown color various shades, which consist only of cedar components, which give the product the healing properties of cedar. Tiles are easy to fit machining and can be used for lining health-improving cedar-plastic cabins and other interiors. In a similar way, decorative tiles are made for the manufacture of wall panels, products of various geometric shape such as pyramids, boxes, etc.

A method for producing decorative items from waste cedar cones by pressing under pressure under pressure with holding and fixing the surfaces of the product at room temperature, characterized in that the pressing is performed when heated at 120-130 ° C under a pressure of 100-125 kg/cm 2 and the surfaces are fixed under load 10-20 kg/m 2 for about 30 days.

Similar patents:

I was given a picture of cedar for my birthday. In the picture handmade from a fallen cedar cone - beautiful two swans. And the picture itself exudes a pleasant aroma of the freshness of the forests. I have never been given such a gift, I really liked it. An unbearable desire to learn more made me type "cedroplast" on the Internet in order to find out at least what it is and what it is eaten with. I did not expect that this miracle picture is so beneficial to health.

After all, the cedar has been growing for 6-8 centuries ... And it keeps all the age-old wisdom of space, the world in itself and gives to humanity, transmuting negative phenomena, bad energy. And for so many centuries the cedar has been serving man, the world.

A bit of history...

The inhabitants of the Urals, Siberia, and the European north knew about the healing properties of cedar and from time immemorial used it to treat many ailments and ailments. A vitamin drink was prepared from the needles, wounds and abscesses were treated with resin, pine nuts received the most valuable vegetable oil, which, in addition to nutritional properties, has a number of healing qualities. Pine nut milk prepared from the kernels of nuts was used to treat pulmonary tuberculosis, kidney diseases, and nervous disorders.

The first information about the cedar is lost in the mists of time. The Egyptians buried pharaohs in cedar sarcophagi. Cedar was in great demand among the Assyrians, ancient Romans, Greeks and other peoples. King Solomon also built a fleet of cedar, in his time it was erected famous temple in Jerusalem - the first house of the name of the Lord, which was sheathed inside with cedar boards. The Lord drew attention to the healing properties of cedar in the Bible. Thus, in the third book of Moses, Leviticus, the cedar tree is mentioned several times as healing and cleansing.

Everything in the cedar - needles, resin, wood - has a high phytoncidity. A hectare of forest emits more than 30 kg of volatiles per day organic matter, which have a huge bactericidal power. Cedar resin has very high bactericidal healing properties. During the years of the Great Patriotic War tampons impregnated with cedar balsam stopped the onset of gangrene, protecting wounds from infection and suppuration. ethnoscience in her centuries-old practice, she has always used cedar resin. Unlike other resins conifers cedar resin does not crystallize for a long time and does not lose its bactericidal qualities. The fat of pine nuts is different from other fats. high content polyunsaturated fatty acids, especially linoleic. Of the nitrogenous substances, proteins predominate - they make up almost 90%. Proteins of pine nuts are characterized by a high content of amino acids, and arginine predominates among them - up to 20%.

The wood of cedars is dense, pleasant Pink colour, with a beautiful texture and a delicate balsamic aroma. It lends itself perfectly more than in cedar wood: this is what experts in bioenergetics say. The Siberian nugget inventor Anatoly Khromov suggested using this raw material saturated with bioenergy and developed a technology for making ornamental material " Kedroplast".

"Kedroplast" can be used in hospitals, health-improving institutions, children's rooms, in workrooms with various types of fatigue, irritability, functional disorders of organs and systems, asthmatic problems, various allergic symptoms.

"Kedroplast"- a composite wood material, which includes: pine nut shell, pine cone husk, the one that the tree shed itself (otherwise the healing properties of cedar are not preserved), and cedar resin as a binding element. " Kedroplast"- an environmentally friendly material, the only connecting element of which is cedar resin. This is its uniqueness and main difference from the fiberboard and chipboard that have flooded the whole world, from which almost everything is made, from furniture, including children's, to wall panels. On the harmful effects of formaldehyde resins on all living things, in in large numbers contained in chipboard and fiberboard, no one needs to talk today.

Efficiency increases, clarity of consciousness improves.

Functional disorders of the body and fatigue are reduced.

The amount of harmful bacteria in the surrounding air is reduced.

The smell from "Kedroplast" removes aggression and irritability.

Asthmatic and allergic syndromes are alleviated.

There is a restoration of strength due to the natural correction of the human biofield.

When installing tiles at the head of the bed:

Reduced sleep time due to quick recovery energy and forces of a sleeping person.

The discomfort of morning awakening is removed due to increased clarity of consciousness.

Applying tiles to sore spots relieves pain.

When installing a single tile on the desktop:

Computer radiation is almost completely blocked.

Reduces the harmful effects of any radiating equipment up to devices with microwave radiation.

The healing properties of Kedroplast plates have been confirmed by numerous studies of the Research Institute of the Russian Federation. In the Scientific Center of Informational Medicine "Treatment" "Informatics" "Diagnostics" "Education" (NCIM "LID O."), using a special computer hardware complex, the spectrum of radio emission of biological objects and objects is studied environment, which was used in experiments with "Kedroplast".

A 10-minute contact with the plate leads to a significant improvement in the process of lipid peroxidation (LPO) - the main process of cellular adaptation. Removes disorganization and loosening of layers cell membrane(accessibility of the inner layer to peroxidation). However, immunodeficiency, increased enzymatic activity and imbalance of biochemical processes remain unchanged.
Under in vitro conditions, the plate also, even more effectively than in vivo, improves the state of cellular adaptation.
The identical effect of the plate in vitro and in vivo leads to the conclusion that the plate "works" at the level of the cell membrane.
The mechanism of action of the plate is based on the energy purification of cells from other people's gross vibrations.
The plate has active positive natural vibrations (they can be called the "Spirit of the Cedar" or the "Spirit of the Cedar Forest"), which are able to neutralize negative vibrations from people and spaces (strong negative pollution of the earth in the infrared region of the spectrum).
Purifying from gross negative vibrations, the plate helps to improve the functional state of cells, organs and the body as a whole, improves well-being.
The plate is able to remove the information viruses of cancer, CFS, AIDS, reduce the activity of trichomonas, toxoplasma, trypanosomes, but not chlamydia and other small pathogenic microorganisms.
The plate is active only upon contact with a person, it does not contain high information, it is able to influence a person through a photograph.
Recommended contact of the plate with a person: at least 5-10 minutes 1-3 times a day.

Today, there are no analogues of this material in the world. It does not contain artificial components that can harm human health, it restores, strengthens and maintains the biological field and activity of the body. The unique, elite material has biological energy, which is similar to the energy of human cells, organs and the entire body system. This elite material is able to convey its entire atmosphere, healing properties and smell to a person. That is why he is so popular.

If this material is used as a lining of the walls of a room, then one can notice a significant increase in a person’s working capacity, an increase in mood, a decrease in fatigue, functional disorders, and more. Doctors strongly recommend using cedar plastic tiles in various types premises.

Kedroplast is a new, natural, health-improving material. Today, there are no analogues of this material in the world. It does not contain artificial components that can harm human health, it restores, strengthens and maintains the biological field and activity of the body. The unique, elite material has biological energy, which is similar to the energy of human cells, organs and the entire body system. This elite material is able to convey its entire atmosphere, healing properties and smell to a person. That is why he is so popular.

What is cedroplast - presentation

Everyone knows about the healing qualities of cedar. Therefore, cedroplast is not only an amazing facing material, but also a pantry of healing properties. Due to this, decorative tiles are able to withstand various diseases. This material includes in its composition the shell of a pine nut and the husk of a pine cone, which itself fell from the tree. Those cones that fall to the ground on their own have the maximum number properties that have a positive effect on human health. The tile is covered with a varnish made from cedar resin. Often, to protect products, a layer of wax is applied.

Production of cedroplast

AT modern world, a huge selection of this unique in characteristics, elite material is provided, including a separate tile, decorative panel, facing material for office furniture and living quarters. Firm RosKedr offers everyone who wants to purchase a wonderful tile that will complement the interior of a residential, office space and, at the same time, will provide a lot of positive effects.

Galileo's Cedroplast Program

Such products are very often used as a worthy piece of furniture, such as a beautiful plate on the wall. Cedroplast is also used to absorb radiation that negatively affects the human body, which comes from household appliances. If this material is used as a lining of the walls of a room, then one can notice a significant increase in a person’s working capacity, an increase in mood, a decrease in fatigue, functional disorders, and more. Doctors strongly recommend using cedar plastic tiles in various types of premises.

Kedroplast can be used in hospitals, health-improving institutions, children's rooms, workrooms for various types of fatigue, irritability, functional disorders of organs and systems, asthmatic problems, various allergic symptoms.