Garden paths from old tires. Do-it-yourself paving slabs from tires - we make rubber garden paths, photos and videos. To create, you have to stock up

When answering the question of how best to organize an approach to a house on a slope, most experts recommend terracing the site using gabions. With a limited budget, another option is possible - a do-it-yourself tire track.

This is the most original way of arranging the local area. Unlike wood, rubber is more resistant to temperature extremes and moisture. Its other advantages include anti-slip coating, as well as cushioning when moving, due to which it is more convenient to climb slopes.

Old truck tires can be turned out and painted. In terms of dimensional stability, they are not much inferior to new tires. Therefore, if you are looking for raw materials for garden paths at affordable prices, or even for free, you will not find a better option. In the device of low fences that delimit several zones in the country at once, such coatings perform decorative functions. Returning to practical tasks, the first thing to note is:

• frost resistance;
• hydrophobicity;
• softening of blows at falling;
• simple maintenance, including the possibility of minor repairs;
• no significant costs during the installation period.

When choosing car tires, it is important to be guided by the physical properties of the products. For example, summer tires, thanks to hard rubber, can withstand 40-degree heat and adhere to any surface. Longitudinal grooves on the tread contribute to high-quality drainage, thanks to which even the simplest paths last for years. For decor, winter tires with large lamellas are more suitable. It dries faster, and in the cold, unlike concrete and wooden coatings, it almost does not slip.

Video "Garden paths from old car tires"

From this video you will learn how to make a garden path from old car tires with your own hands.

Options

With the right processing of raw materials with oily liquids, large tires can be easily cut by hand. A sharp knife, hammer, chalk and power tools for cutting hard products are useful in the work. The easiest way is to make a ladder path from 40-50 tires. It is convenient to go down to the reservoir, the gazebo and the summer outbuilding along it. And if the building is on a hill, this is almost the only way to get to a bus stop.

The manufacturing process includes the following steps:

1. Lay clean tires on the ground from the bottom up.
2. Tamp the base of the path with a vibrating plate, and, if necessary, dig a 2-centimeter trench for each element of the path.
3. Fill the holes with broken bricks or pebbles so that the structure does not collapse in the wind.
4. Install railings for safe movement with children.

An equally strong track can be laid out from rubber modules. They easily change direction and are interconnected according to the principle of puzzles. Long paths leading to garages and outbuildings are best made from square tiles. The material lends itself well to repair, does not slip and does not deteriorate under the influence of mechanical loads.

From whole tires

If there is a playground on the site, it is not necessary to cut the tires. From whole products it is really possible to make a winding ladder leading to a hill or to a horizontal bar. Depending on the quadrature of the area for the fence, you will need from 40 to 60 old tires, which can later be given green, orange or red shades. Small structural elements are laid out on top, and the largest - at the bottom of the stairs.

In winter, they are never covered with ice, and in summer they are easily cleared of debris. After the rain, they dry quickly, contributing to safe entertainment in the bosom of nature. Products can be laid horizontally or vertically. Moreover, in the first case, the holes are easily filled with soil, and in the second case it is possible to organize a high-quality drain.

From tapes

First of all, it is necessary to take measurements and process the products correctly. To straighten the rubber faster, the power tool is directed along the edge, and only then the tire itself is cut. Finished strips should be nailed to pine boards and laid on the cleaned soil. The optimal distance between the coating elements is 1 mm. The gap is needed for the full drainage of rain and melt water.

Before laying the tapes on the site, it is important to equip the drainage. Gravel is best suited for this purpose. And so that the path does not bulge, small grooves are made at the installation site of the bars.

borders

Such structures protect the paths from the growth of weeds, and the subgrade from erosion. With their help, you can not only decorate the area near the house, but also mark the boundaries of the most beautiful places on the site. The maximum project budget is 700 rubles. This is 5-7 times cheaper than the installation of metal and plastic tapes. Tires can be laid vertically, and cement mortar should be used to better fix the products.

The cut tires will make dense ribbons that delimit the public and private areas of spacious plots. Most often, such fences are fastened with bolts and plates. From the supporting elements you will need logs. So that the tree does not deteriorate under the influence of bad weather, it should be impregnated with an antifungal compound before use. As a decoration, you can use larch saw cuts with a diameter of 10 cm.

Decor

The painted surfaces increase resistance of products to moisture, a frost and an ultraviolet. In choosing such compositions, it is more logical to give preference to paints marked KCh-136, intended for rubber processing. They absorb up to 97% of the sun's rays and provide a perfectly smooth surface for painted parts. Thanks to the unique property of thixotropy, self-leveling of coatings is possible, and most importantly, thickening of colors at rest.

Complete drying of the layer occurs after a few hours. If you work at a temperature of +25 ° C, the track can be used after 2-3 days. The remaining tires will serve as the basis for the production of rubber tiles by hot pressing. These coatings are convenient to use not only on the street, but also in residential premises.

Almost any summer cottage allows you to realize a wide variety of ideas. So, you can use comfortable tracks from old tires as decorative elements. No need to rush to throw away things that have become unnecessary, you can restore these items and bring something new and original.

An example of a garden path made of tires

Do-it-yourself tracks from old car tires will be a unique addition for anyone. Moreover, their use can be completely diverse. From car tires, you can make an original frame for the following various elements of the garden:

• or flower beds;

It should be noted that most owners of country houses will be very willing to build garden paths from car tires, due to the fact that this method is not unnecessarily laborious and costs almost no large financial investments. By the way, as an independent improvement of garden paths, it will not be necessary to use the entire surface of old tires, but only a certain part of it - a treadmill, the so-called tread.

Garden paths from cut tires

To make such a high-quality decorative element in your garden with your own hands, absolutely any old tires are suitable, but it is best to use those left over from trucks. Their use will significantly increase the width of the future convenient garden path, but at the same time you will need much less tires themselves than if you used car tires from passenger vehicles.

Moreover, this will in no way affect the quality of the future track, but it will allow you to reduce the time spent on the external improvement of your site. There are several reasons why it is recommended to use rubber from old car tires:

Manufacturing process

It should be clarified that it will not be difficult to obtain all the necessary material for such a track.
A similar process is easiest to perform in stages:

After you build such a garden path with your own hands, it will be advisable to walk along it several times, which will allow you to better press the boards with tapes into the top layer of soil. In order for the coating to lie well, the ground must be leveled under it without fail.

To this end, it will be necessary to carefully remove a small upper layer of earth, and fill the resulting area with fine gravel or pour ordinary concrete. When the blank for such a path is completely ready, you can spread the rubber coating you made for the garden on it. When laying rubber bands from car tires, it is not necessary to lay them directly on the ground layer.

We nail the rubber on a special board

With the help of ordinary nails, they can be carefully nailed to a wooden beam or boards, and only then carefully laid out on a garden path.

At the same time, if you do not place car tires close to each other, but leave a small gap 1-2 cm wide between them, then new grass will soon grow through such cracks.

This will look very nice, and will also prevent the rubber bands from car tires from moving in any direction in the future. If you do not have your own truck, then the car tires necessary for the garden path can be purchased absolutely free of charge. For example, skilled craftsmen from all kinds of tire shops, most likely, will only be happy if you help them get rid of unnecessary material.

The use of decorative tracks from tires

In addition to the above areas for using such tapes from car tires, it would also be advisable to use them in the following places of a suburban area:

• Parking of personal vehicles on the territory of the personal plot;
• Path at the entrance or entrance to your courtyard;
• A place used for washing cars, bicycles or scooters;
• A utility yard with a variety of buildings, the aisles between which can be laid out with similar high-quality decorative paths from car tires.

Such a coating on the territory of a country house, built by oneself, will not only look very harmonious in natural design, but also differ in its special practicality during operation.

A variant of the arrangement of a garden path from tires

In addition, such a coating is absolutely non-slippery in itself, which makes the chosen solution more than rational, especially if your family has small children or elderly people. In the spring, at the time of snow melting or at any other inclement season with heavy precipitation, there are often certain problems with the entrance to the summer cottage. This problem can also be solved with rubber bands.

It is necessary to spread them on the most problematic places and any car will pass through them completely unhindered.

It is also worth noting that it will not be superfluous to carry a small amount of such tapes with you in the trunk of your car. They can always come in handy in case of the most unforeseen circumstances, allowing you to get rid of unnecessary manipulations with a shovel and the need to put boards under the wheels if your car cannot drive off-road.


Such interaction of rubber with rubber will provide almost caterpillar patency of transport. Another lesser-known but rather eccentric use of old car tires could be to use them as a country house. Since this material can be given a semi-cylindrical shape, as, in fact, tiles, it can also be laid in a completely similar way.

Naturally, this option is not suitable for the main country cottage, but, say, or it is more than a profitable solution, since with the help of old car tires you can build with your own hands an almost eternal water-repellent roof that can withstand any bad weather.

It looks like the roof of a cottage made of car tires

If the decision to create such a decorative element from car tires in your summer cottage has already been made, then you can choose from two possible options:

• Use rubber bands from tires (the method of their extraction is described above);
• Apply rubber tiles, which, in fact, are recycled tires.

Both of these options are equivalent in their performance. Rubber bands from car tires and rubber tiles have exactly the same characteristics and similar durability.

Recently paving slabs made of rubber has become very popular. Previously, it was used only by summer residents, but now this coating can be found on the alleys of city squares, parks, sports grounds and pedestrian crossings.

Her spread the floor in, summer cottages, is used as a coating in kindergartens, on balconies and tennis courts. The scope of rubber tiles is almost limitless. Why is she so good?

Rubber tiles - safety and easy-to-install pavement that anyone can lay. There would be a desire. Even a special tool is not required for this.

AT this article, we will consider in detail the process of arranging garden paths from rubber tires, describe the advantages and disadvantages of such a coating, as well as stages its self-assembly and rules care behind him.

Pros and cons of rubber tracks

Main Benefits rubber pavement:

1. Strength and durability. Tiles are made from recycled tires that have become unusable for cars. Vehicle wheels are designed to withstand huge load for an extended period of time. Therefore, they are made from the most durable rubber, which is still elastic and resistant to alkalis and acids. So is the paving slab made of rubber, which plays the role flooring on garden paths, has a very long service life and high wear resistance;
2. moisture resistance. The surface of the rubber track is rough, but at the same time soft and pleasant. This surface is quickly absorbs in itself water after a rain;
3. Safety use. Due to its rough structure, walking on a rubber track is absolutely safe. Feet on her do not slip. In the event of a fall, the tile will soften the bruise. In addition, rubber tiles do not get very hot in the sun, so you can even walk on them barefoot;
4. Minimum care behind the surface. Due to its softness and elasticity, the rubber pavement has no chips and does not crumble. If the surface becomes dirty, simply hose it off and wipe dry. If ice forms, remove it with a shovel. Debris from the surface of the tile is easily removed with a broom;
5. Ease of installation. Laying works are carried out without special tools and equipment. Even rubber paving slabs can be laid nonprofessional. Rubber tiles are easy to join and do not form cracks on the surface;
6. Ease of transport. The rubber tile does not break, does not crumble and does not beat. This covering easily transfers transportation even on the most distant distances, while maintaining their original excellent qualities;
7. Affordable cost. The price of rubber tiles is several times lower than the cost of concrete pavement, despite the positive technical characteristics and modernity material;
8. Noise reduction effect. Due to its structure, rubber tiles are able to minimize the effect of extraneous noise during use. Such coverage is perfect for a place where children play - around, for example;
9. Sustainability to sudden temperature changes.

Back to main lack rubber tiles should be attributed to the formation on its surface ice in wet, cold weather.

Mounting tools

For laying rubber crumb tiles need:

• shovel;
• rubber mallet(hammer made of wood or rubber);
• sharp knife.

Making a track out of rubber tires

1. We prepare the material. Used truck tires can be used for a path in the garden;



2. Cut out the surface. To lay out a garden path, you only need protectors, i.e. the part of the tire that is in contact with the road. It is cut off with a sharp knife. The knife is periodically dipped in a solution of soap or oil. Then it cuts the tire more easily. Facilitates cutting and such "cunning": it is advisable to move the mount behind the knife (a small crowbar with a bend at the end);



3. We make the basis for the track. After the tread is separated from the side parts, the resulting ring is cut to make ribbon. This tape will become the basis for covering the garden path. For laying a garden path, you will need more than one (from 2nd before 4th tapes), but several such tapes. It all depends on the width of the laid out track. A single tape can be used for a path between beds;



4. Let's start installation. The tapes are adjusted in length, then their edges are attached to an oiled bar. Between parts of the track it is recommended to leave a small gap (1-2 cm). It is unacceptable to perform tile installation work on a rainy and cold day. It is important to start the laying process in dry weather. Only through 3 days after you can be absolutely sure that it is firmly stuck to the surface.

Note! The rubber track is recommended to be laid on moist soil. The bars will "drown" in the ground without bumps.

In order for the rubber tile to “lay down” well, it is necessary align soil for laying. This can be done by tamping gravel or creating a special "cushion" of concrete.

Laying rubber tiles is necessary only on hard and even surface. For example, on an asphalt base with a thickness of not more than 10 cm. lay tiles on the sand it is forbidden. She will move.

Tiles are laid out tightly to each other. To "clutch" them to each other, use a special rubber mastic or glue from polyurethane.

Advice! Use tiles of different colors to make a multi-colored ornament.

Where and at what price to buy rubber tiles

rubber tiles can buy in any city. It is sold in construction markets, in stores and even in online stores in a wide range. Prices depend on the quality of the material, region, and place of purchase.

Prices for paving slabs made of rubber vary from 929 rub/m2 before 2000 rub. The color and size of the coating is selected individually. You can buy rubber tiles in rolls.

Garden path made of finished rubber tiles

Garden paths can be arranged with the help of rubber tiles. Rubber tile is a material made from crumb rubber.

Get rubber tiles in a hot way pressings(heating and gluing rubber). Main components such tiles are:

• Rubber crumb obtained from crushed tires;
• Coloring matter;
• Polyurethane material for bonding tile components.

A wide range of colors of rubber tiles will allow you to "beat" garden area. Moreover, it is a pleasure to mount them! Rubber tiles stick to each other "castle" way using special bushings.

So, do not hurry throw away old car tires - in their summer cottage they will begin their new life. Make paving slabs out of tires. It is beautiful, easy and absolutely safe for a person to move around the site.

You will learn how to properly lay rubber crumb tiles from this video.

Recently, my aunt was introduced to her niece's blog, she, as a summer resident, was interested in the heading "Ideas for giving". I received an order for a good idea for garden paths. That's what I like about summer cottage construction and repair, so it's room for activity, and not only in terms of space, but also in terms of implementing the most unexpected ideas.

So, back to our sheep paths. Options - a great many, one more beautiful than the other. The tree for me will always be paramount if put before a choice. Still, a living material, breathable, warm.

Paths, consisting of different segments, connected together, also look very nice, especially when one of the segments is green in one form or another.

Mosaic of painted stones, sealed in concrete, refers, in my understanding, to artistic creativity. You create a canvas in an unusual technique.

And there is such a very simple and budget option, you put together puzzles from rubber modules, I like the fact that they can always be shifted, you never know, plans have changed, space will be required. Minute business. Although, of course, more like a temporary measure. In the end, all summer residents and owners of household plots go through a state of temporality, so it will come in handy on the farm.

On the site neumaticoadicto.blogspot.com.es, the author went further, he makes rubber tracks from old tires, but what are there tracks, toys, jewelry, furniture, shoes ... in general, when all country affairs will be in openwork (if it is at all really) you can equip yourself with a workshop and create there, even if only from old tires. Like this:

And from the sidewalls you can build just such a flower bed and walk around in flip flops with tire soles.

It no longer has anything to do with the paths, but completely with the dacha.

Planning the location of linear objects and determining the best option. You can get advice on the topic of a linear facility layout project and order the development of design documentation from the INTERPROJECT company on the company's website www.interproject.ru.