Deciding how to make a wooden fence. The device of a beautiful fence made of wood How to paint a wooden front garden

With the choice of paint for the fence, sooner or later, all owners of summer cottages and country houses. You need to approach it responsibly, since not only appearance fencing, but also its durability. To help in this matter, next we will consider for what types of fences and what paint coatings can be used.

General information

First of all, it must be said that paints and varnishes that are equally well suited to all types of materials do not exist. Therefore, it is impossible to recommend any one universal paint. In addition, when choosing, you should be guided by your own preferences, because there are glossy, matte, translucent paints that preserve the texture of the surface, etc.

Therefore, below we consider the most common coloring compositions that can be used to paint the following types of fences:

wooden;
metal;
brick, concrete and slate.

Having become acquainted with all their types, everyone will be able to decide for himself what is better to paint the fence in a particular case.

Wooden fence

Most often for wooden fences use the following types of coatings:

oil paints;
water dispersion;
glazing.

Below we will get acquainted with the features of all these compositions.

Oil paints

Oil paints are fairly versatile coatings, which have not so long ago been used everywhere for both outdoor and indoor use. True, with the advent of other paints and varnishes on the market, their popularity has declined.

The main advantage of oil paints is their low cost.

They are the cheapest paintwork, in addition, they have some other advantages:

good hiding power;
have a rich color;
form a smooth glossy or matte film on the surface.

However, they have many disadvantages:

are toxic and have a strong unpleasant odor;
dry for a long time;
short-lived, prone to cracking and peeling. At best, the service life is several years;
burn out in the sun.

Below are the prices for oil paints from some manufacturers:

Note! The durability of any paintwork depends not only on its characteristics, but also on compliance with the application technology. Painting instructions are usually on the packaging.

Alkyd enamels

Alkyd enamels are a good choice for wooden fences. They provide its surface with a glossy or matte film with rich color.

The basis of these coatings is pentaphthalic varnish, due to which they have the following advantages:

high elasticity and strength;
durability;
resistance to temperature extremes and frost;
resistance to sunlight;
good hiding power;
when applied, they form smooth surface, thanks to which it is easy to paint the fence with your own hands with such paint.

As for the shortcomings, we can distinguish the presence of a pungent odor, since white spirit is most often used as a solvent. However, painting the fence is carried out on the street, so this process does not cause much discomfort.

The cost of alkyd enamels is higher:

Water-dispersion

AT recent times gained great popularity water-dispersion paints. Unlike all the compositions described above, they form a thinner film on the surface, as a result of which they do not hide the texture of the tree. In this case, as a rule, they form a matte surface.

These colors have a lot of advantages:

they are odorless and environmentally friendly, since water is used as a solvent;
dry within a few hours;
are elastic and strong enough;
resistant to various negative factors environment like frost, ultraviolet radiation etc.;
tinted, which allows you to get any color or shade.

Among the shortcomings of these paints, only their high cost can be distinguished. This is especially true of latex and silicone formulations, which are the most durable. However, even acrylic coatings are more expensive than the above paint and varnish coatings:

Note! When choosing a paint, you should pay attention to the type of surface for which it is intended, as well as to the area of \u200b\u200bits application. The fact is that the coating intended for internal works, will quickly fall into disrepair.

Glazing

However, for outdoor work it is best to use coatings on synthetic basis:

polyurethane;
alkyd;
alkyd-urethane.

They have all the same properties as conventional synthetic-based paints. As for the cost of these paints, below are some of the prices:

metal fence

Primers

When choosing how to paint an iron fence, first of all, you should pay attention to the primer, which protects the metal from corrosion, as well as external negative influences. These compositions are of different types:

Soil type	Peculiarities
Insulating	Provides for metal surface protective film protecting from moisture and oxygen. The most common insulating primers for metal are the following compositions: alkyd GF-021. The cost of this soil is in the range of 50 - 200 rubles per liter, depending on the manufacturer; EP epoxy primer- the cost is from 70 to 250 rubles. for 1 liter
passivating	Reduces the electrochemical activity of the metal and significantly slows down corrosion. The most common primers of this type are the following compositions: FL-03K- The price starts from 20 rubles. for 1 liter; GF-0119- also from 20 rubles. for 1 liter
Corrosion inhibitors	They are quite complex in composition substances that stop the corrosion of the metal. The most common primer of this type is EP-0180. Its cost is ~ 100 rubles. for 1 liter
Rust converters	Designed for application to surfaces affected by corrosion. The composition of such primers contains phosphoric acid, which, reacting with rust, converts it into iron phosphates. In addition, a polymeric protective coating is simultaneously formed on the surface.

Advice! Often, home craftsmen are interested in how to paint fence posts? The bottom part must be covered. bituminous mastic. The paint for the upper part is selected depending on the material from which the post is made.

Each of these primers has its own advantages, so you should choose according to the characteristics of the surface of the fence.

If primer-enamel is chosen as the primer composition, then further painting of the fence is not required. If the surface is simply covered with primer, then for subsequent painting, you can use polyurethane compounds, which we will discuss below. In addition, the metal fence can be coated alkyd enamels or oil paints.

Advice! When choosing how to paint a forged fence, you can stop on a black primer, on top of which bronze paint is applied in places with a semi-dry brush, which creates a worn effect.

Polyurethane enamels

These coatings are made on the basis of polyurethane resins and diisocyanate hardeners.

Their operational qualities are very high, in particular, the following advantages can be distinguished:

high resistance to mechanical stress;
durability;
weather resistance;
easy to apply and form a uniform glossy film on the surface.

The disadvantages include toxicity during application and drying. In addition, the cost of these paints is quite high. Below are the prices for formulations from some manufacturers that are often found on the market:

Concrete and brick fences

Among the owners suburban areas concrete eurofences are popular, which are most often sold unpainted. Therefore, after acquiring them, many people are interested in how to paint the eurofence? Great solution in this case, facade water-dispersion paints are used.

These compositions have all the same advantages as water-dispersion paints and varnishes intended for wood. Moreover, they can be used not only for concrete, but also for painting slate or even brick.

As mentioned above, the disadvantage of these compositions is the high cost. Therefore, you can use cheaper paints, for example, alkyd or epoxy. The latter serve as excellent protection for concrete surfaces, as for their cost, it ranges from 150 to 550 rubles per 1 liter.

Note! Before painting a slate fence or a concrete/brick fence, the surface should be treated with an adhesive primer.

Here, in fact, are all the most common types of coloring compositions that can be used to paint fences.

Conclusion

The choice of paint for the fence depends, first of all, on the material from which it is made. In addition, it is necessary to take into account the cost of the coating, as well as its decorative and performance which we have discussed above.

For more information, see the video in this article. If after reading the material you have any questions, ask them in the comments, and we will be happy to answer them.

An inexpensive fence for a summer residence made of wood, metal, plastic, and other material can be painted and even painted in such an original way that it will not look like a cheap structure at all.

Fence decor is possible both when you are just going to install, and when you plan to update a fence that has served for more than one year. Of course, materials for painting and painting will need different ones - depending on the material from which the fence itself is made.

How to paint and paint a wood fence

To obtain wooden fence conceived decor, first of all, we will prepare a wooden base.

Sanding boards. It will turn out quickly and efficiently if you use grinder. In summer cottages, such a tool is not common, and if you do not have one, use a grinder with a special grinding nozzle. At the last stage, you can walk on the boards and sandpaper.

Protective impregnation for fence boards. The wood of the fence must be treated with a protective agent that prevents decay, destruction by insects, fire and moisture protection. There are many of these for sale, but you can also make your own.

Base priming. It seems that everything is simple here: you need to choose a primer for wood. But primers are also different. An alkyd-acrylic composition would be ideal for a wooden fence. If we take a simple acrylic primer, the paint will last on the surface for 3-4 years, after which it will begin to peel off. If you try hard on alkyd-acrylic, the coating will last 8-10 years. The alkyd component will penetrate the wood, and the acrylic will ensure the adhesion of the surface to the paint.

Painting the fence with the base layer. First of all, we select the right paint. In the department of paints and varnishes, we focus on the recommendation on cans of paint “for wood”. Suitable paints:

oil;
acrylic;
alkyd.
If you want to preserve the texture of the wood, use a glazing compound or a protective tinted compound to paint the fence.

We start painting the fence when the base layer is completely dry.

To fix the decorative layer, it is better to varnish the fence.

How to paint a concrete fence

We clean the surface of the fence.
We apply a primer on concrete (mineral or acrylic base)
Apply base coat. From the colors you can choose:
paint for concrete;
facade paint;
paint for painting cement surfaces.
Paint bases can be different, but most often, acrylic, polyurethane, epoxy.
When this layer of paint dries, you can begin to paint the fence.

How to paint a metal fence

If the fence is not new, it may have rust on it. We get rid of it with the help of a special wash or rust converter.
clean surface metal fence treated with a primer for metal.
From paints it is better to use alkyd or epoxy enamel, acrylic paint. The compositions may include anti-corrosion ingredients.

Coloring is a rather complicated process that requires not only a lot of time and related financial costs, but also care and skill. long time perform repetitive and monotonous work. Many domestic citizens are interested in the question - how to paint a wooden fence installed on own dacha. It should be noted that the features of this process directly depend directly on the type of fence. Consider the process of painting on the example of one of the most popular varieties of wooden fencing structures - a picket fence.

By itself, a picket fence is a rather weak structure in terms of structural strength. This is usually due to extremely small size hedges, as well as the use of relatively thin materials. By and large, the picket fence is an exclusively decorative fence, since it cannot in any way prevent illegal entry into the site.

The picket fence is an exclusively decorative fence, since it cannot in any way prevent illegal entry into the site.

It is exploitation as an object of decoration in landscape design is one of the reasons for requiring coloring. Also, do not forget that wood is extremely susceptible to the negative effects of the environment, namely:

increased level of humidity;
sudden changes in temperature;
prolonged exposure to ultraviolet rays.

Under the influence of these factors, wood can crack, lose its attractive appearance, darken and even rot. In addition, it can be attacked by pests such as termites or various bacteria.

A layer of paint allows you to qualitatively protect against atmospheric and temperature manifestations, pests and microorganisms.

The technologies for the production of paints and varnishes that exist today make it possible to create very high-quality paints that can ensure the safety of wood, as well as serve for the longest possible period of time. Thanks to them, such a sacred dream of many dacha owners as a presentable and pretty fence made of white picket fences will become a reality.

Choice of paintwork materials

In the modern specialized market paint and varnish products there is an impressive choice, which is why a person who is poorly versed in this topic, pick up suitable option it will be very difficult. You also need to remember that using the wrong paints or illiterate painting will cause no less damage to a wooden fence than the above environmental factors. Therefore, the choice of paints and varnishes must be taken with all responsibility.

Since the picket fence, as a rule, will be in plain sight, for example, decorating a recreation area on the territory, framing the house or complementing the original paints used in an advantageous way. without fail should create not only a protective, but also a decorative coating.

First of all, they choose special impregnations that protect the tree from the penetration of moisture, insects, mold, fungus and other misfortunes. There are both store-bought impregnations and homemade ones. It will, of course, be cheaper to make such a substance on your own, but their performance will not always meet even the minimum requirements. Accordingly, saving in this case is not recommended. It is advisable to give preference antiseptic preparations produced by well-known brands, for example, Tikkurila, Pinotex and others.

In addition to impregnation and paint, it is necessary to choose a primer. it special remedy, which creates a thin layer on the wood surface, which at the same time creates additional protection for the wood structure and significantly increases its adhesion to paints. Thanks to the primer, the surface will be qualitatively leveled, and the paint will lie on it as evenly and firmly as possible.

Modern paint manufacturers delight consumers with an impressive range of this variety of coloring compositions:

The advantages of classic oil paints are obvious - they are good protective functions, as well as an affordable price in many respects. Unfortunately, this is where the advantages of such products end. But the presence of a number of shortcomings is noted, therefore, when choosing how to cover a wooden fence, you should pay attention to oil paints last.
The advantages of classic oil paints are obvious - these are good protective functions, as well as an affordable price in many respects.

Flaws:

the inability to penetrate deep into the wood structure, due to which the paint layer will be superficial in any case;
short service life - regardless of the thickness of the layer, it will begin to peel and crack in two to three years, and maybe earlier if climatic conditions will contribute to it;
instability to environmental influences. Oil paint extremely poorly tolerates the effects of moisture, as well as direct sunlight. Under the sun, such a coloring solution will quickly lose its attractive appearance, burn out and crack. In this case, a certain paradox is also noted - despite the fact that the sun has a destructive effect on oil formulations, it is best to apply them in sunny weather, as this contributes to their faster drying;
prolonged drying. They dry indecently for a long time, as for modern realities, time - at least a day. In many cases, this is a very significant disadvantage, causing many inconveniences.

Alkyd

More quality option than oil paints. Such compositions are also characterized by an affordable cost for many consumer categories, and besides, they are much more durable. If you paint the picket fence with bituminous paint, you can forget about the need for re-painting for three to four years. However, alkyd solutions, by and large, are intended for application in areas in contact with the ground. It can be, for example, a foundation, or just the lower part of the fence.

Highly quality formulations used in finishing works on ships. They have an incredibly high resistance to negative manifestations of the environment - moisture, ultraviolet rays, sudden changes in temperature, severe frosts, or vice versa - heat, hail, wind, etc. To harm protective layer from deck varnish or paint is virtually impossible, unless you try to do it on purpose.

They have an incredibly high resistance to negative environmental manifestations - moisture, ultraviolet rays, sudden changes in temperature, severe frosts, or vice versa - heat, hail, wind, etc.

The only drawback of these solutions is the high cost, which is not surprising, given their quality. Therefore, it is recommended to use the product only when painting small areas. Considering that the picket fence is just that "insignificant area", buying several cans of deck paint can be quite justified.

To date, this is the most common option. They are modern, reliable, create a high-quality protective and decorative layer, and at the same time have an adequate cost. They are created specifically for wooden surfaces. The basis of such solutions is an acrylic mixture - a synthetic fiber with inorganic solvents.

They are modern, reliable, create a high-quality protective and decorative layer, and at the same time have an adequate cost.

It is strongly recommended to choose impregnation, primer and paint from the same manufacturer. In spite of general principle work of these coloring solutions, each company has its own technology for their manufacture, and therefore different kinds can be quite badly combined with each other.

Be sure to read the instructions for using the product, which, as a rule, is applied directly to the jar. It is necessary to pay attention to consumption, acceptable methods of application, drying time and others. technical specifications, and compare them with existing requirements.

Be sure to read the instructions for using the product, which, as a rule, is applied directly to the jar.

It will not be superfluous to visit the manufacturer's website, because the most complete information can only be obtained there. Do not save - buy paint with a margin, because even with the most accurate calculation of the amount of material required, it is usually not enough.

It is not necessary to paint the picket fence in one color. It can be combined by painting the posts or crossbars in one shade, and the picket fences in another. Can even be mixed various formulations, getting completely original color solutions. It will look especially stylish in combination with beautiful ones brought to the fence.

It is not necessary to paint the picket fence in one color.

Two types of mixtures are created especially for coloring wood - glazing and covering. Be sure to clarify whether the purchased product belongs to these two types. The difference between them is that glazing retains the natural structure of the tree and even its shade, while covering ones create a very dense surface layer that hides the real color of the material.

Preparing the surface of the fence for painting

Before starting any painting works the surface to be painted is carefully prepared. In the case of a fence, it is as follows:

removal of the old layer of paint;
removal of contaminants ingrained into the structure;
sealing any structural defects, such as cracks, grooves, bumps, etc., for which wood putty is used;
grinding and polishing;
surface leveling;
if necessary, replacement of shtaketins that are not subject due to significant mechanical damage.

Quality preparation is very important. Not only the quality of the coating, but also its protective and decorative functions directly depend on it.

Painting process

In order for the result to meet all expectations, it is required to strictly observe established rules and recommendations, as well as the procedure for performing work:

First of all, impregnation is applied. One layer is enough, but at the same time it is necessary to ensure that the solution gets into all the microcracks and pores, closing them. Antiseptics dry out very quickly, and after a short period of time it will be possible to proceed to the second stage.
Before proceeding with the solution of the question - how to paint a wooden picket fence, you need to prepare the base for paint material. This is a task for the primer. It is recommended to use an alkyd-acrylic based primer. As in the case of impregnation, one layer is enough. But it is very important to let it dry completely. It is categorically not welcome to apply primer compositions on unleveled and having clear signs surface contamination.
The next step is to apply the first coat of paint. It is desirable to paint the fence with a brush made of natural hair. Such a tool will not create stripes on the tree. If there is a roller, you can use it. You can also resort to using a spray gun, but for competent work it requires the availability of relevant knowledge and skills.
After the first layer has dried, a thorough inspection is carried out for various defects. They need to be removed, cleaned and tinted.
Application of the second, final layer of the coloring mixture. The same tools are used as when painting the first layer.
A quality final inspection is carried out. Detected gaps, smudges, smearing and other defects must be eliminated immediately, before the surface is dry.

It is advisable to paint a picket fence on both sides, even on the back, which is traditionally not visible either from the street or inside the site, depending on the purpose of the fence. This will help to reliably protect it from the damaging effects of moisture.

The fence is reliable way restrictions on free access to your territory. In order for your fence to last for a long time, you need to know how to paint it correctly.

Every owner who deals construction work at the cottage or country house, the question arises: how to paint an old wooden fence?

In order for the coating to be resistant and give the fence shine and gloss, you need to choose suitable formulations for painting wooden surfaces.

Paint selection

What paint is best for painting a fence? If the question is relevant, the cheaper it is to paint the fence, then first of all you should look at multi-component or acrylic dyes.

Their advantages:

Acrylic dyes resistant to high temperatures and severe frosts. If you paint the fence with such paint, you can be sure that in severe cold or in heat below 40 ° C, the appearance of the fence will not deteriorate at all. Besides, acrylic paint perfectly cope with such a task as painting a wooden picket fence;
Multicomponent dyes can boast of high resistance to precipitation. Rain, snow or hail - a fence painted with a multi-component composition will endure all weather phenomena;
Reliability and durability. The service life of acrylic paint is up to five years, multi-component paint will last a little less (three to four years). Thanks to this, you will be able to provide a presentable appearance of the site for a long time and cheaply.

Important! If you regularly tint the surface of the fence, then the service life of acrylic paint can increase up to 10 years!

It is very good if the painting of the wooden fence is done with varnish. It is not cheap, but it provides a high degree protection of wood and perfectly emphasizes its structure.

The varnish is resistant to temperature changes and precipitation, and due to its transparency, it will give the tree a beautiful shine.

If the question of what is better to paint a wooden fence is urgent, then pay attention to impregnation. She gives very beautiful view wood, and also protects it well from bugs, precipitation and other negative external influence.

Impregnation is easy to make yourself. Its simplest form is ordinary motor or transformer oil.

Note! For painting the fence, it is better not to use oil paints, enamels and other compositions not intended for wood processing. They will not protect the tree from external influences, in addition, after a while such paint will peel off and the surface of the fence will not look very beautiful.

Preparing for painting

Before you start painting your fence, make sure that its surface is absolutely smooth, without roughness and notches. If there are marks on the surface old paint, delete them. Emery will help you with this, warm water with soap, sponge and solvent.
After the entire surface of the fence is cleaned, proceed with additional grinding work. Grinding can be done in several ways.
Using paper specially designed for this type of work. It will help remove excess layers of paint, dirt, and cope with uneven wood. It will also help clean rusted metal parts of the fence;
If there are chips, cracks, dents and other serious defects on the surface of the fence, then it will not work without a primer. Apply it to the entire surface of the fence, and after it hardens, you can start puttying.
After puttingtying, it will be useful to go over the wood with sandpaper again to make sure and ensure a 100% good result.

Fence painting

Before you start painting the surface, take care of the protection of the respiratory tract and skin. Many dyes, when in contact with the skin, can cause severe irritation, and inhalation of paint fumes can be dangerous to human health and life.

Therefore, when working, use gloves and a protective mask.

Also, to carry out the work, we need:

Brush;
Dye;
Airbrush;
roller;
Putty knife;
Brush with metal hairs;
Ordinary brush.

All painting work It is desirable to carry out in calm, clear weather. However, painting in extreme heat is also undesirable, since in this case, the coating may dry too quickly and not show its full properties.

When painting, follow the "top-down" method. That is, it is first necessary to process upper part fence planks, and then its lower part.

Advice! When painting the bottom of the fence, place a thin layer under the boards wooden block. Thanks to him, the brush will not get dirty on the ground, and you can comfortably complete the work.

After treating the entire fence with the first coat of paint, leave the fence to dry for a day. After that, you can continue to work and apply a second layer, if necessary. Also carefully examine the surface of the fence for chips, paint defects, stains, etc.

Painting cost

Any owner will be interested in the question: how much will it cost him to paint a wooden fence with his own hands? And what will be the price of the work if you hire craftsmen from a company offering their services.

There is no single answer to this question. It all depends on the region in which you live, the cost of materials needed for painting and the amount of work. But you can roughly estimate.

Let's say you decide to paint the fence yourself. In this case, you save on the services of employees and pay only for materials. Then painting will cost you from 500 to 2000 rubles, depending on the cost of consumables.
When calling specialists, you pay, in addition to their work, also a tool with consumables(if they provide them), as well as the cost of gasoline spent on travel. Typically, payment is calculated based on the price of painting per m2. On average, painting the entire fence will cost you from 2,000 to 5,000 rubles.. You can find out the final cost of the work from a specialist who will come to you and evaluate the front of the upcoming work.

The main purpose of the fence is to protect the territory from strangers and prying eyes of neighbors. Therefore, it must be practical and durable. But besides this, such a structure also performs an aesthetic function. It allows you to make the site more attractive. Therefore, it is extremely important to know how to paint a wooden fence in order to give it beauty and practicality.

Fence maintenance prior to construction

Practice shows that the fence has a long service life. But experts recommend starting caring for such a fence in the country even before it is built. When installing the structure, the places under the pillars must be cleared of vegetation and anthills. So you will provide the fence with reliable protection against damage by harmful insects.

Important! Experienced craftsmen it is advised to fill these areas on the ground with colored gravel. Then the fence will be less susceptible negative influence moisture from the ground. And without fail, the protective structure must be properly impregnated with a special protective agent and painted.

The fence must be carefully processed. After all, this is a guarantee of its resistance to wear and long term services. And there is no need to postpone this procedure. After all, if the wood is not impregnated and painted in a timely manner, it will begin to deteriorate rather quickly. And how this is done, we will tell further.

Should I paint a wood fence?

Fencing structures made of wood can be an excellent decoration for any private area. Practice shows that wood is a very effective material. However, we will not hide that it also has its drawbacks: the wood is quite thin and has low resistance to negative environmental factors.

If you want to get a light and pretty fence in the country, you can as building material use a picket fence. That is why the relevance of finishing and painting such structures is obvious.

The construction of a mesh fence will be faster: it also weighs little, but has less attractive appearance, and after some time .

Impregnation of the protective structure in the country with special protective equipment extremely important. But how to process a wooden fence? Experienced craftsmen advise choosing an antiseptic. It is quite affordable and very effective remedy for wooden surfaces. After all, a special antiseptic impregnation prevents such Negative consequences as the formation of mold and mildew. And the subsequent painting of the picket fence eliminates the risk:

swelling due to high humidity;
attacks of bark beetles or ants;
changes in the color of wood due to shrinkage of the tree under the influence of sunlight, etc.

Advice! The picket fence should be treated with such a tool in advance, before it is installed in a complete structure. Then the ends of the planks will be carefully protected from the negative effects of precipitation, which is difficult to do in the case of an installed fence.

Fence paint selection

Processing a wooden fence - very milestone, but it is equally important to paint the structure correctly.

Before you buy paint, it is better to figure out what kind of paint will be optimal for your fence construction in the country. And besides, it is worth considering that the boards in certain places will be in contact with the ground. These areas need to be treated with a special bituminous composition. It will allow this surface to acquire water-repellent parameters, which in turn will significantly extend its life. And this must be done even before the installation of the picket fence structure on the ground. Thus, the building in the country will be provided best protection from negative external influences.

The picket fence can be enameled if the planks have excessively pronounced flaws. It allows you to completely hide the original color and structure of a particular type of wood from which the fence was built. But in fairness, we note that in this case, dense layers of the coloring composition will completely hide the natural color of the wood.
In addition, the picket fence in the country is painted with multi-component paint. It makes it possible to preserve the original texture and shade of wood. And what kind of such paint is best for your design, you must determine, depending on taste preferences and the requirements of the surrounding landscape.
Another good option for picket fence is acrylic paint. But it is better to choose a composition that does not have a detrimental effect (due to the presence water base) on the tree when it is stained. Do not buy a product with a solvent, as it will quickly peel off the picket fence.
It is best to choose a transparent building glaze or wood varnish if you want to preserve and even emphasize the original shade of natural wood.

The variety of paints is quite significant, and which one is best for your design, you must determine for yourself.

fence painting technique

The fence must first be cleaned and sanded with sandpaper. And it is better to have both coarse and fine paper. First, significant protrusions are removed, and the second - the surface is finally leveled.

Then the picket fence suburban area covered with primer for wood. Existing defects and damage will need to be primed, puttied, and after drying, also sanded. Next, the structure is covered again finishing layer putty and treated with a protective coloring compound. Thus, your country fence the best protection will be provided for years to come.

In order for the wooden fence in the country house to be as resistant as possible to negative factors in the atmosphere (precipitation, sunbeams, wind), it should certainly be covered with an antiseptic, and then painted. This will increase its service life several times. Moreover, you can perform paint and varnish work with your own hands and without the help of professional builders.