Barbecue of small sizes in brick gazebos. A gazebo with a barbecue with your own hands. The best building instructions. How to choose the right barbecue

Having conceived the construction of such a structure, you should immediately take care of the plan, which must be drawn up in full accordance with the size of the future structure and its geometry. This will help you accurately budget for all the necessary materials.

As an example, we offer step-by-step instructions for building a gazebo with a barbecue in various ways. This will help in organizing your own construction and set the right direction for the entire event.

DIY wooden gazebo with barbecue

And first we will consider an example when the gazebo is made of lumber, and the brazier is made of bricks. Immediately important advice: look for a 6-meter beam and a board. This way there will be much less waste.

The first point of building a gazebo made of wood with a barbecue with your own hands is the choice of a building site and its configuration. We take into account several important points:

Entrance to the house and the entrance to the gazebo should look at each other (it’s more convenient to set the table).
We reckon with the rules fire safety. There will be a brazier with an open fire in the gazebo, you should not build it very close to the house.

Having decided on the place, with the help of building sand we outline circuit foundations of the building. Our drawings of a gazebo with a barbecue suggest that the gazebo will be octagonal, and the base under it will be in the shape of a circle. You can “draw” a circle using a pipe fixed in the ground and a rope tied to it.

In our case, the fertile soil layer was only about 20 cm thick. It was followed by excellent clay soil. The building is relatively small, so concrete columns were chosen as the base. It is better to choose the land under them and replace it with a sand and gravel mixture. This way you can adjust the height.

material for bottom strapping serves as a bar with a section of 100x100 mm. In order not to make a mistake with the cutting angles, use a cardboard template. For the device of transverse beams, it is better to use a board 50x100. To give the strapping reliability, it can be fastened with metal corners inside and out. Galvanized 105x105x90x2 mm at 135 and 90 degrees are perfect. Do not forget about the waterproofing layer of roofing material between the base posts and the strapping.

Do-it-yourself gazebos with barbecue step by step photos

Floor in the gazebo is made of edged boards 50x100. We immediately cut the right amount of material to size. On the front side, it is better to plan the board with a planer, and from the inside - treat it with an antiseptic (preferably in several layers). We fix the floor with a screw and be sure to check the bottom trim again with a level.

Top harness it is more convenient to build below. So it will be more convenient to adjust the locks and the lengths of the rafters. We use the same edged board 50x100 as the material for the rafters and the upper strapping.

In our case, a do-it-yourself wooden gazebo with barbecue has octagonal roof. Therefore, the lock of the rafters will also be octagonal. We carry it out from a bar 100x100. Pay attention to the placement of supports under the timber. To install them, the octahedron had to be enlarged with boards 1.5 cm thick.

Arbors with barbecue with their own hands. A photo

Let's move on to production rafters. We carry out a triangular cut at the lower attachment point. We will use it as the bottom lock.

Like the upper bundle, we also assemble the truss structure at the bottom. It will be easier to correct minor flaws.

Our drawings of a gazebo with a barbecue provide for the installation of ten support pillars. We make them from a bar 100x100. To make it more convenient to carry out their installation, we saw off the ends exactly at an angle of 90 degrees. We fasten the posts to the base of the gazebo with the help of corners 105x105x90x2 mm made of galvanized steel. Checking the design with a level. In our case, the installation of slopes was not required.

A gazebo with a barbecue with your own hands. Photo instruction

Now we are installing the truss system and the upper harness. For fastening we need:

Roof made of an inch board with a width of 100 and 150 mm. We lay it close; start from the bottom and go in a circle to the top point of the structure. For ease of marking, we use a cardboard template. It makes it easier to mark the cut line. We fasten each board with two self-tapping screws on each side. So the roof does not deform over time.

Let's not forget about brick brazier with their own hands, which will be in the gazebo. We dig a hole under the foundation of the barbecue with a depth of 40 cm.

formwork can be made from boards from transport pallets.

We cover the formwork ruberoid. The most convenient way to do this is with a construction stapler.

We put reinforcement (rods 10 mm class A3) and reinforcing mesh (d = 4, 100x100 mm) into the pit under the foundation. We fill the foundation with a mixture of cement and building sand in a ratio of 1 to 3. Cement grade M 250 is ideal. In our case, it took 5 bags.

After that, you can sew up the gazebo around the perimeter log simulator 45x146 mm. This will not only make the building more attractive, but also add rigidity to the frame.

window sills We carry out from the board 50x100 mm. To fix them, we use corners 50x50x40x2 mm. This part of the design is optional, but it will make the gazebo more comfortable for guests.

Foundations benches we make from a bar 50x50. We fasten them at an angle to the walls using corners 50x50x40x2 mm. This is the most durable and ergonomic design option.

The material for the manufacture of the upper part of the benches is a grooved board 28x121 mm. To increase strength, all benches are connected from the ends with plates 80x40x2 mm.

To visually divide the gazebo into two functional zones, we decorate the barbecue side wooden lattice. A beam of 15x20 mm is well suited for its manufacture.

Wooden gazebo with a barbecue with their own hands. A photo

On this work on the gazebo comes to an end and you can proceed to the construction barbecue made of bricks with your own hands.

The simpler the design, the easier it is to install it without errors. Therefore, it is better to use simple brick barbecue drawings without frills. For the construction you will need:

For proper and accurate masonry, a number of conditions must be met. First, the solution should not be too thick. After installation, the brick should be easily adjusted by hand. Secondly, the ideal seam is 3 mm thick. This must be achieved in order for the structure to be as strong as possible. Be sure to observe the same thickness of the seam throughout the structure. Third, don't rush. Laying is carried out strictly according to the level. On this, the step-by-step instructions for building a barbecue grill made of bricks in a wooden gazebo can be completed. The whole sequence of masonry can be clearly seen in the photographs.

Brazier made of bricks in the gazebo. A photo

It remains only to cover the roof shingles(in the example, Shinglas red tiles were used) with the help of nails and a construction stapler, and treat the gazebo with an antiseptic and varnish. We apply antiseptic in two layers. A glossy yacht varnish is well suited as a varnish.

Brick gazebo with barbecue and barbecue

For those who are more of a bricklayer than a carpenter at heart, we offer step-by-step instructions for building a gazebo with a brick barbecue. Let's skip the stages of finding a place and marking for a structure. All this has been described above. Let's get straight to the point.

Construction of a brick gazebo with barbecue. Step by step instructions

The brick structure will weigh quite a lot, so this time foundation must be made solid and reinforced. After it is ready, we carry out the laying of the walls.

The rafter system can be made in the same way as for a wooden gazebo.

The first row is better to lay out on a dry one.

We are building firewood. It will also be the basis for the barbecue and smokehouse.

We continue to lay out a brick barbecue with our own hands. Next in line is the firebox and countertop. Optionally, you can arrange a niche for dishes.

A gazebo with a barbecue with your own hands. Step by step photos

For the cauldron, we need to install stove. The version with removable rings is shown below.

The base of the barbecue is ready. It's time to lay out the countertop fireclay bricks.

In masonry, we must use refractory mix.

The next stage in the construction of a gazebo with a brick barbecue with your own hands is the organization chimney and forming a channel for the smokehouse.

In our gazebo there will be Russian oven. We form for her under.

Each row must be reinforced wire.

We lay the walls at the same time. We check the accuracy of the work with the help of a level.

Finishing the oven vault.

In our case, the rear wall of the oven had to be pulled out.

The work will take quite a lot of time, but progress will warm the soul.

We continue to build a brick barbecue with our own hands. We install the doors smokehouses. We finish the arches above the barbecue, hob and stove.

The stitching can always be entrusted to an assistant.

Above the stove can be installed stainless steel mesh. In the future, it will be good to dry berries and mushrooms or dishes on it.

How to sew up the roof, we have already told above.

Gazebo with barbecue and barbecue with their own hands. A photo

This concludes the step-by-step instructions for building a brick barbecue. The pavilion-barbecue complex is ready for delivery.

We bring water to the sink at the back of the gazebo. It can be closed for the winter.

pipe make it three-channel. So the traction will be more stable.

Do not forget to cover the entire masonry with a special impregnation with water-repellent effect.

It will take about a week to dry the structure. On this, the construction of a gazebo with a barbecue made of bricks with their own hands is completed.

Homemade brick brazier. Step by step instructions

Mangal with his own hands. Blueprints

We begin the construction of a brick structure with a strong device foundation. We select the size in accordance with the size of the future barbecue.

We dig a pit at the chosen place. We arrange formwork along its edges (it can be made, for example, from boards from pallets). We pour concrete and reinforce the base. It will take 1-2 weeks for complete curing.

Base ready and you can start building the barbecue.

Drawing up drawings and plans is a useful thing. They will help you make an accurate estimate. Here is a sample list of required materials:

Refractory brick;
Wire for masonry reinforcement;
Sand and cement;
Corners made of galvanized metal;
Mesh or reinforcing bars;
Lime.

Do-it-yourself brick brazier. A photo

For preliminary calculations, lay out the bricks as they should lie in the structure. Now it is clear where the masonry seams will be and how many halves and quarters of the brick will be needed.

The material absorbs moisture very well. Therefore, it is better to put under a brick waterproofing material. A couple of layers of roofing material is fine.

It's time to start building the brazier.

Cooking solution. To do this, mix cement, sand and slaked lime in a ratio of 1: 3: 0.25. We will lay out the prepared brick ahead of time on the resulting mixture.

Laying will require accuracy, attention and patience. We follow the seams, we level the bricks according to the level.

The technology of work requires laying rows in checkerboard pattern. We focus on the first row, start laying from the corner, gradually filling the side space.

The brazier will be exposed to high temperatures. Therefore, it is better to lay the second row with the help of a clay-chamotte mixture.

To make the base for the brazier, you need to install the rods fittings between opposite walls. The base of the firebox is installed on them. For example, it can be a metal pallet.

The combustion process requires a constant supply of oxygen. To do this, it is necessary to leave several gaps without mortar in the laying of the firebox.

It remains to install the grate on the rods or ledges (depending on the masonry of the brazier) and select the countertop.

Brick barbecue in the country

Brick barbecue - ideal for a summer cottage. This is a simple, comfortable and reliable design that looks quite presentable.

We offer a detailed guide that will help even a person inexperienced in construction to build such a building as soon as possible.

The first stage of work is the preparation detailed plan. We will give only an approximate scheme of the structure. You must take into account the features of your own stove, its appearance, decor elements, and so on.

Ordering a brazier made of bricks. A photo

Do not forget about the niche for firewood and coal. We calculate a place for the grill at a height of 65-70 cm from the ground. The stove should be placed 10 cm lower.

Bricklaying for barbecue. A photo

After working with a pencil and a ruler, you can proceed to the practical part. As in the previous instructions, we start with foundation.

Under the barbecue, the same foundation is suitable as under the barbecue. This is a monolithic reinforced base. We dig a pit for him about half a meter deep. We cover the bottom with a layer of a mixture of gravel and crushed stone, water and ram.

We carry out the installation of reinforcement, form the frame. All that's left to do is formwork. Now you can move on to pouring the base with concrete.

The foundation will take up to two weeks to dry completely. A little patience and you can move on to building a brick barbecue.

Chamotte brick - ideal for masonry ovens. It won't hit your pocket too hard, but it's strong enough and can withstand high temperatures. We prepare cement, building sand, and red clay in advance. They are necessary to create a solution. Fill the clay with water ahead of time and hold it for several days.

Having prepared the solution, you can proceed to the masonry. We work slowly, according to the plan, lay out row after row. We constantly control the masonry with the help of a level.

Lay out first pedestal barbecue ovens. It should not be too high (up to 70 cm).

Lay out the second row, shifting the beginning of the tier by half a brick.

Having reached the furnace, keep in mind that its depth must be at least three bricks, and its length must be at least six. We use fireclay bricks. We install reinforcement bars on the ceilings.

The next step is building chimney. If the scheme is drawn up correctly, then there will be no problems. When laying the rows, do not forget to make a "chimney tooth" on the back wall of the stove. It will significantly improve the draft in the pipe.

It remains only to add decorative elements and clean the masonry from mortar splashes and other construction debris. You can decorate a barbecue with paint applied to a brick. This will visually highlight the seams of the structure. In general, the design has already been completed and can be used for its intended purpose.

Do-it-yourself barbecue from a barrel

If there is not much space on the site to arrange a gazebo with a barbecue, you can always make a barbecue from a barrel with your own hands. For this we need:

Metal barrel (preferably food);
Paintwork materials (primer, paint);
Brackets and loops for fastenings;
Chimney pipe.

We will install the barbecue on a special structure. To make it, we need pipes of small diameter (up to 50 mm) and boards. In the process, you will need the following tools:

Drill with a set of drills;
Angle grinder;
Measuring tape measure;
Set of wrenches;
Fastening elements (clamps, bolts).

The preparation process is completed and you can start production. We cut in the side of our barrels rectangular hole, as shown in the photo.

Now we need 6 pipes small diameter. If they are concreted, then cut with a grinder. From 4 pipes we will make the legs of the structure on which the arbecue will stand.

Barbecue from a barrel. A photo

The remaining two pipes are used to connect each pair of legs. To fix the structure, we use bolts.

They will fix the position of our barrel. The length of the pipes is adjustable depending on the size of the barrel. The result should be a two-piece structure, each of which will consist of a pair of legs and a connecting pipe.

To connect the two parts, you need to take 5 boards 150-200 mm wide. We use four of them to fix the legs (two boards on each side). We fix one board at a height of 5-10 cm from the ground. The second should be slightly above the middle of the legs.

Using a drill, we drill holes in the boards with a diameter equal to the diameter of the leg pipes. We install the structure upside down and install the boards on the legs. In our case, bolt clamps were used to fix the boards at the desired level. We turn the structure over and the boards fall into place, preventing the legs of the structure from moving apart.

We use the last board to connect the upper tier of boards. This is the final touch in the creation grounds for barbecue. Now a barbecue from a barrel with your own hands can be installed in its place.

The next stage of work is the arrangement of the barrel. For cooking we need lattice. To fix it inside the structure, we install a pair of brackets on each side with bolts.

We recall that piece of the barrel that we cut out at the very beginning. We will make a barbecue cover from it. We install the hinges and fasten it back to the barrel. The grille brackets will prevent the lid from falling in when closed.

Anything can be used as a handle for the lid of the structure, for example, a shovel handle.

After installing the lid, thoroughly wash the barrel.

At the end of the barrel we drill holes for ventilation and make a shutter for them.

After that you can fix chimney and paint the barbecue.

This concludes the step-by-step instructions for building a metal barbecue.

Projects of gazebos with barbecue

There can be many variations of wooden gazebos with barbecue facilities. This variant has an octagonal base and open walls on one side. There is enough light in the gazebo, and benches and a table can be installed as needed.

It is not at all necessary to make the entire gazebo completely out of brick. A feature of this gazebo are forged elements from which the walls are made. The design looks light and is naturally lit from all sides.

Even if there is not much space on the site, you can always build a canopy and decorate the walls with ordinary boards. This version of the gazebo with a brick barbecue will fit in a very small area.

If time and resources allow, then on your site you can build a real work of building art. A wooden gazebo with a brick barbecue, stove and countertop, decorated with tiles, looks rich. Although its device will require not so much time.

A large family needs a lot of space. It is better to do without the construction of bulky walls, and build a canopy and a brick brazier with a countertop under it on a reinforced durable foundation.

The project of a gazebo with barbecue. A photo

It is difficult to imagine without a platform for outdoor recreation and. After the labors of the righteous, it is so pleasant to admire the stars in the evening or invite friends to a barbecue. All you need is a gazebo with a barbecue. Projects, photos, advice on the selection of material and video instructions - we have collected as much information as possible in this material.

Read in the article

Materials for the construction of a gazebo for a summer residence with a barbecue (photo)

There is such a rule in construction: the simpler the design, the less material consumption and the cost of the entire structure will be. If the task is to save money, but at the same time get an excellent result, it is worth considering simple drawings and affordable materials.

Wood

Allows you to create structures with any, even the most complex, geometry. can be processed in different ways: painted, stained and varnished. Openwork patterns can be cut out of wood.

Important! Before installing the support beams, they should be treated from decay and insects with special compounds or simply scorched on a fire for several minutes. By the way, this is how wooden construction was carried out in ancient Russia. You can see how good this method is, because many towers and temples have survived to this day.

Stone

If metal is for centuries, then stone is forever. A stone gazebo will require preparation and capital investment, but the possibilities of such a structure are almost endless.

As a rule, the base of the gazebo is made up of, and then decorated with stone tiles. In such a design, walls of any material can be provided: glass, wood, polycarbonate. Transparent walls will allow unhindered. In a closed gazebo with a barbecue, it is possible to install it in cool weather, so that it can be used even in winter.

Photos of winter gazebos with barbecue:

1 of 4

Living gazebo

Creating a live gazebo is not easy. But such a structure will look great in the garden. For a living structure, you will need to install supports and land. Wild grapes will braid faster than all the supports. Its juicy dense greenery will quickly create a dome and walls.

European designers suggest using willow as a material. Its branches should simply be stuck around the perimeter of the future gazebo and then growing trees should be formed in such a way that they intertwine, creating walls and a dome. In three years, you will receive an amazing design that will decorate the site.

Related article:

One of the types of additional suburban buildings are gazebos. How to build yourself an excellent design, what material to choose for this and much more, you will learn from our material.

Gazebo with barbecue: photo projects

The building in the garden should organically fit into the general. It should be designed in the same design as the rest of the buildings. We offer you the most successful ideas of gazebos with barbecue and barbecue, successful projects, photo design of buildings.

1 of 6

Placing a barbecue area in a country house: projects, photos, sizes

The location of the gazebo should be carefully considered. Agree, a location overlooking a deaf or road is not the best idea. The review should be pleasing to the eye.

Carefully study the plan of yours and choose a place. There is another significant nuance: proximity to and communications. A gazebo with a barbecue, the photo projects of which we reviewed, involves cooking and arranging and gardening. Kitchen utensils and food will have to be brought from home. Not very convenient if you have to walk through the entire area. A paved one should run to the building, otherwise, after rain, you will not get into it. It is convenient if you carry water. In this case, the process of cooking and washing dishes will be greatly simplified.

Advice! When planning a place to stay with a barbecue, keep in mind that the distance from a wooden house must be at least eight meters according to fire safety rules.

What should you know about the size of the building? Think about how many people should be accommodated in your building at the same time? At least one and a half square meters of area should be provided for each. So your gazebo will not be crowded. To the result, add the area for and the safe space around it - this is at least another four square meters.

The shape of the gazebo is only important from an aesthetic point of view. The easiest way is to build a regular rectangular structure. But if desired, you can use the shape of a polygon, circle or semicircle.

We offer several drawings so that you can understand how the construction should be planned.

Projects of gazebos with barbecue and barbecue for summer cottages:

1 of 4

The choice of barbecue and barbecue for a summer residence (photo of models)

Braziers can be divided into two main categories: portable and stationary. In addition to this division, they can be distinguished by the type of fuel used:

solid fuel;
electrical;
gas.

Portable braziers are convenient if you plan to use them only during the season and from time to time take them with you on a trip or to visit your neighbors in the country. Such structures are made of thin sheet iron and weigh relatively little. Braziers have simple fastenings for assembly. When assembled, these devices can easily be placed in the trunk of a car. The main disadvantage of portable devices is their fragility.

Stationary braziers are a completely different story. They can be made of thick forged metal or refractory. Such a design can last more than a dozen years.

Design	Image	Description
		This is a heavy structure that requires concrete. It can be installed outdoors next to the gazebo or inside it. For a stationary barbecue, an exhaust hood will be required to remove combustion products. In such a device, you can cook dishes on an open fire all year round.
		Made from cast iron. It does not require pouring t, but, given the large weight of the structure, a flat, solid platform should still be prepared. Masters who offer such products decorate them with forged details. Such devices are not cheap.
		A similar design is made of brick and metal and includes a barbecue, barbecue, tandoor, Russian. The multifunctional device allows you to cook a variety of dishes: from barbecue and smoked fish to pies.
		For their work, you will need to conduct electricity in the gazebo. Skewers in such a device rotate automatically and the meat is evenly fried from all sides. Such a device can be used not only in the fresh air, but also in the kitchen.
		For a country house, a design that involves the use of bottled gas is suitable. Such a device weighs about forty kilograms, for the winter it can be stored in a utility room. Such a device is convenient in that it will work in any weather.

Important! Wrought iron braziers should be placed under the roof to protect from rain and snow.

So, you have built a gazebo with a barbecue with your own hands. How to properly care for the device for cooking so that it lasts as long as possible?

Brick barbecue should be periodically cleaned of ash and soot. To make the bricks less in contact with open fire, make a replaceable metal stake inside the brazier. Firstly, a removable sheet will greatly simplify the cleaning process, and secondly, it will protect the brick. Periodically, the insert should be replaced as it burns out.
Factory-made metal barbecues should be calcined before use. Manufacturers cover them with heat-resistant paint, which should polymerize under the influence of high temperature. For the first time, an unpleasant odor may appear.
Electric and gas grills are washed with a soft brush and soapy water. After cleaning, dry all surfaces.
In the off-season, metal devices are best stored in a dry place under a roof.

Safety requirements

do not touch the metal parts of the barbecue during cooking;

keep children away from open flames;
do not fill the barbecue with water (you can burn yourself with steam);
do not place the barbecue closer than six meters from the house and others;
burnt coals do not pour into the trash, they can smolder for another 48 hours;
keep a fire extinguisher near a wooden gazebo with a barbecue;
periodically invite your neighbors to barbecues, otherwise they have every right to call firefighters who will fine you for lighting an open fire.

Conclusion

We reviewed projects, photos of gazebos with barbecue facilities from different materials. Agree, what could be better than sitting with friends in the evening, savoring fried lamb with a strong drink and admiring the gorgeous view of the garden? As you can see, nothing is impossible! There are design options suitable for the garden and your financial possibilities. Go ahead and share your experience. Good luck!

The presence of a comfortable gazebo with barbecue, barbecue and stove in the countryside allows you to diversify outdoor recreation and get the most out of this pastime.

Inside, several people can be accommodated at once, here you can equip a relaxation area with benches or sofas, as well as put a table to gather with friends and family members.

If you equip a gazebo taking into account the peculiarities of the weather in a certain season, you can protect yourself from wind, rain and other sources of discomfort - and spend at least a whole day outside the house, enjoying the beauty of the surrounding landscape.

Let's find out more about what ideas can be implemented when building or installing ready-made arbors of this type.

Arbors with barbecue, barbecue and stove, photo

The main types of gazebos

When planning the design features of the gazebo, it is important to consider when and how long you plan to be inside.

Depending on the arrangement and protective functions of gazebos, such buildings can be divided into three main types:

Winter gazebo with barbecue, photo

Modern gazebos of each type are represented by a variety of forms. You can choose simple designs or choose non-standard options that will only decorate your site.

The simplest type - rectangular gazebos with barbecue facilities - is convenient, since both a cooking zone and a recreation area can be placed inside. In addition, due to the simplicity of the form, you can put such a structure along smooth roads or building sites.

The square shape of the gazebo is also popular, but it does not accommodate many people and is not always convenient if you plan to use the gazebo for several purposes at once.

If you want to focus on the elegance of the design of a suburban area, choose a round gazebo with a barbecue. Inside, a table of a similar shape, installed in the center, will look harmonious.

Attention! As a rule, round arbors are small rotundas with domed roofs and floral decorations. They are suitable for areas with arches, classic-style window arches and other flowing elements.

Polygonal shapes are popular due to the large space inside. Hexagonal and octagonal gazebos with barbecue facilities are the most common version of such structures. As a rule, these are open or semi-open gazebos: the full decoration of all walls requires a lot of time and material costs.

Arbor for a summer residence with barbecue, photo

Corner gazebos with barbecue facilities are a good option for owners of plots with free space in the corner. You can also choose the forms of gazebos that combine several elements of geometry, but be sure to consider the harmony of such buildings in your summer cottage.

Dimensions of gazebos for summer cottages

One of the important nuances that should be considered when choosing a gazebo is its parameters. Moreover, the larger the cooking structure itself, the more free space will be required for recreation, so you should not choose a small gazebo with a barbecue in order to save money.

Advice: if there is enough space inside, you can install decorative fountains, Greek statues, large vases or even a swing in the recreation area.

It is believed that you can feel comfortable in at least two free square meters. Based on the estimated number of guests, calculate the area of the gazebo for arrangement. The optimal height of such a structure is from two meters.

If there is enough free space, choose a gazebo larger than 3 by 3 meters so that the barbecue or other elements of internal equipment do not create discomfort.

By the way, when choosing a gazebo, you should also consider how proportional it is with other structures on your site. For this reason, a large gazebo with a barbecue will not look harmonious in a small garden: a small rotunda or an openwork forged structure would be more appropriate here.

Well, if you are lucky - and there is enough free space on the site, feel free to put a spacious gazebo with a barbecue and a kitchen - and enjoy a good rest.

Types of gazebos by type of materials used

Before choosing a material for gazebos, you should consider several factors: their durability and your expectations from the protective functions of the coatings used, decorative properties and, of course, the price, which can vary significantly depending on the quality. Since food will be cooked inside such gazebos, we advise you to choose materials that will withstand exposure to fire and steam.

It is also important that they are durable, withstand moisture and temperature changes, and are easy to install.

Covered gazebo with barbecue, photo

A good choice would be a wooden gazebo with barbecue facilities. It is popular because of its durability, strength, decorative variety. Wood can be treated for fire protection as well as to prevent pests.

The shape of wooden elements can be very diverse: today gazebos with a barbecue made of timber, cuts of wood, boards, etc. are in fashion today.

Wooden gazebos with barbecue, photo

Warm pavilions with a barbecue made of stone or brick also have excellent practical properties. If there is enough free space inside, you can make a reliable brick barbecue in the gazebo.

In addition to strength and long service life, the advantages of such materials include fire resistance and protection from the cold. But such a design will not be cheap.

Brick gazebo with barbecue, photo

For warm seasons, gazebos with a metal grill are suitable. Recently, there has been a growing demand for wrought-iron gazebos with barbecue facilities that will add grace to your site. Such structures can be made with a roof or a canopy: covered gazebos with barbecue facilities will allow you to gather outdoors even in bad weather.

Attention: a metal barbecue in the gazebo can be located separately or attached to the gazebo itself and have a permanent location.

Arbor with barbecue made of metal, photo

For combined gazebos, several different materials are used at once. It can be a metal frame, brick trim, wooden decor, clapboard interior decoration, a wooden or tiled roof. You can purchase a universal gazebo made of polycarbonate with a barbecue: such designs have a translucent roof.

By the way, it is not necessary to use the same materials throughout the gazebo. You can emphasize its zoning by choosing a different exterior or interior finish for each of the zones.

Another reliable material is polystyrene foam or other gazebos made of blocks with a barbecue. Such buildings will be strong and reliable and will allow you to relax inside even with the onset of cold weather.

The modern trend is the use of glass for decorating residential and other buildings on the site. Glazed gazebos with barbecue, barbecue and stove can be panoramic (large fragments of glass are inserted into the frame - this is the so-called frameless glazing), as well as have wide windows and finishes from other materials.

By the way, a good option is to use sliding glass sections: in this case, you can expand the recreation area by simply sliding such a door and enjoy the beauty of your site and fresh air.

Glazed gazebos with barbecue and barbecue, photo

Furnace variations for interior fittings

In the gazebo you can install a lot of interesting structures for cooking. And it is not at all necessary that it be only a brazier. Many people choose multifunctional devices for gazebos, such as barbecue complexes with a smokehouse, devices for pilaf and other dishes. So you will definitely be sure that each of your guests will be able to get enough of the dish that he likes.

Arbors with barbecue grill and stove, photo

The most common option is a separate barbecue or barbecue built into the gazebo. It is intended for cooking shish kebabs, as well as dishes from vegetables and fish products on skewers.

If you wish, you can make a brick finish of the brazier to make it more convenient to use.

Arbor with barbecue made of bricks, photo

Attention: if you are interested in spending time with loved ones in a comfortable recreation area even in cool times, choose gazebos with a fireplace and barbecue that will allow you not only to eat, but also to warm up.

Arbors with a fireplace and barbecue, photo

When decorating a classic Russian gazebo, many people prefer to build an overall oven, typical of past times. But you can limit yourself to a Russian-style mini-oven. You can also choose a multifunctional barbecue oven with a chimney for a gazebo.

If you prefer meat cooked on a grill instead of skewers, choose gazebos with barbecue grills. Quite often, a barbecue is mounted to the wall, but you can place it separately.

Another trend associated with barbecue is the installation of such a device in the center of the gazebo. This layout allows each of your guests to freely approach the cooking area and participate in the creation of culinary masterpieces. It will be better if you place the hood directly above the barbecue in the central part of the roof.

The next popular option is the grill. Unlike the devices described above, the grill involves cooking with the simultaneous supply of heat to the product from both above and below. Therefore, the grill has a special lid. Often it is mobile and easily moves to other areas of the gazebo to free up space. Due to the variety of its forms, you can think over the interior design of such a gazebo to the smallest detail.

And lovers of pilaf can please themselves with a stove with a barbecue and a cauldron for a gazebo. The cauldron has a round hole and a special section for fuel and firewood. Such an oven is very convenient in cold seasons. Since it is important to take into account some of the intricacies of its installation to ensure maximum comfort, it is better to contact the specialists and order a ready-made stove instead of building it yourself.

Experimenters will surely like the option of a gazebo with a tandoor and a barbecue. Such devices are rarer, so you will most likely have to make them to order. Tandoor is a spherical or jug brazier and allows you to cook delicious dishes from Asian cuisine.

We decorate gazebos with barbecue in the country

We completely forgot that a gazebo with a barbecue should also look aesthetically pleasing. Therefore, it's time to find out exactly how experts decorate it, and what approaches will make this design even more elegant or modern.

The design of a gazebo with barbecue and barbecue begins with the choice of the materials themselves. It is important to take into account their texture, color, the possibility of transforming the shape, creating relief patterns on the surface, and using additional finishing materials. When planning these subtleties, be sure to build on the style of the rest of the buildings on the suburban area.

The greatest variety of styles are gazebos made of wood. Depending on the size and shape of the wooden elements used, you can emphasize different design styles:

Metal gazebos can reflect the beauty of both classic and contemporary styles. In the first case, choose iron gazebos with barbecue, decorated with forged elements. The use of artificially aged parts is allowed. In a modern gazebo, use simple metal parts.

A brick gazebo must necessarily be in harmony with the main building on the site. Such structures can be decorated with additional decoration of decorative stone, siding, tiles, wallpaper, wood paneling, glass or metal. It all depends on your imagination.

Another important component of the decor is lighting elements. In the gazebo, the use of different lamps is allowed. For example, you can decorate the outside with hanging lanterns, the walls themselves with garlands, and hang chandeliers and sconces inside.

Do not forget about green decorations for gazebos. It can be climbing plants, bright flowers, plantings in flower beds and vases.

Fans of large companies can surprise their guests by installing a brick barbecue in the gazebo on their site. Thanks to this design, it will be possible to organize holidays at any time of the year, even during light rainfall. A cozy atmosphere and meat fried over an open fire will leave a pleasant impression of the time spent.

Properly organized design work will make it easy for the selected forms to fit into the order arranged on the site. A wide selection of shapes and diverse models of pavilions with a barbecue made of bricks can satisfy any taste of the owners of the territory.

What does it look like

Pavilions with a barbecue grill and a stove, as a rule, are separate buildings. The roof is supported by strong posts made of stone, brick or wood. Walls can also be in several versions:

durable brick;
lungs made of wood;
using panoramic opening transoms;
space can be open.

Most often, owners choose open options to enjoy the surrounding nature. It is customary to build solid capital walls to a small height, up to 1 meter from the floor.

As a rule, there is a large table inside, around which there are powerful wooden benches or elegant country chairs, or wicker furniture.

It is necessary to make a competent calculation to allocate the territory so that the interior space can accommodate a sufficient number of guests.

A fireplace or barbecue made of bricks in the gazebo should not narrow the recreation area. At the same time, there should be space in front of them for caring for an open fire or for preparing some dishes on an open fire.

Design choice

There are many interesting options for building a gazebo with a barbecue grill and a stove, projects are both for light structures and for capital buildings. Each case has its own advantages and disadvantages.

Powerful foundations and durable materials have good performance, but they are quite expensive and it takes more effort and money to build. Lightweight structures require a lower budget, but require better maintenance and are less durable.

Wooden gazebos with a fireplace can be treated with special materials that protect against fire. They are also easier and faster to build with a minimum of helpers and materials.

Any wooden structure that is adjacent to an open fire must be treated with fire retardants. This is a component that is added to woodworking compounds in order to provide fire protection. The flame retardant slows down the ignition and prevents direct fire exposure from several minutes to several hours.

Selection of materials for construction

Modern technologies allow you to build gazebos with a fireplace, photos of which are on the page, from almost any material. This approach helps to realize even the most daring author's fantasies.

Any necessary attributes of relaxation can be entered into the interior of the room, for example, a barbecue in the gazebo or a brazier in a brick gazebo. With proper care, the building will last for many years.

from brick

Often there are gazebos made of bricks with barbecue facilities. The positive qualities of the design are that the building has strength and durability. The materials used are resistant to open flame. Thus, a gazebo with a fireplace is installed.

A capital structure does not need any kind of regular repair or maintenance. Withstands adverse weather conditions. A barbecue in a brick gazebo, installed with your own hands, can be operated even in winter, as you can quickly heat inside, and the walls will keep the desired temperature for a long time.

The disadvantages lie in the need to build a solid foundation under the base. This is an additional financial burden on the project.

from wood

The project of a gazebo with a barbecue made of wooden materials compares favorably with other analogues:

aesthetic appearance;
easily fits into almost any landscape design;
only a lightweight foundation is needed for construction;
a wooden barbecue gazebo costs less than a brick or stone one;
Even a person who does not have much building experience can build it.

The disadvantages of such a layout are short-lived material that needs regular care and maintenance.

metal

Metal buildings look stylish. However, the independent construction of forged models requires experience and ability to work with metal. You also need to have design skills.

Construction of a gazebo with barbecue

It is customary to take a brick gazebo with a barbecue as the basic model for the project. Consider, using her example, the preparation and installation of all elements. First of all, a solid foundation is laid, because it must withstand not only the building itself, but also the stove installed inside.

If you plan to use a barbecue in a brick gazebo, then the strip foundation will not be enough, you will have to fill in the entire space at floor level. A foundation pit with a depth of 0.8-1.0 m is being prepared for the base. We construct formwork around it and lay down communications: light, sewerage, water supply, etc.

The bottom layer is drainage from crushed stone of about 20-30 cm. We form a waterproofing protection on top of it. Now everything is ready for pouring, composed of sand, cement (grade "400") and crushed stone in a ratio of approximately 3:1:5. We fill everything with laying reinforcement.

We make the walls in half-brick on cement mortar. Laying is carried out after the foundation has completely solidified.

ordering

At the same time, brickwork for a barbecue for a gazebo is underway. The first two layers must be laid solid. Next, mark out a niche for firewood, a firebox and side walls. The height of the opening for cooking is usually 7 bricks. After 2-3 rows, you need to lay a reinforced mesh.

Air gaps are made in the last rows. The chimney is also lined with metal inside or asbestos pipes are used. On the outside, a visor is made to protect against foreign objects or debris entering the pipe. The outer surface is plastered or decorated with tiles.

VIDEO: How to build a brick barbecue yourself

Finishing and canopy

A canopy is necessary not only to protect against precipitation, but also to increase the life of the structure. It can be either continuous, covering the entire structure, or local - clearly above the barbecue.

For fixing the canopy, the foundations are laid at the stage of preparing the foundation. The pillars can be either brick or metal - this does not affect the strength of the structure and depends only on the general design of the recreation area.

You can even use wooden supports, but only if treated with flame retardant-based refractory compounds.

The roof can also be selected from any available material - metal tiles, profiled sheets, wood, etc. It is not recommended to use ondulin. The main thing is that the overall design fits into the design of the site and does not look like a foreign body.

For convenience, we offer several options for barbecue schemes in the gazebo

VIDEO: Instructions for building a brazier made of bricks.

Pavilions with a brick barbecue are widely used in cooking on fire and coals in summer cottages and household plots.

Now there is a huge variety of options how to make a brick brazier in a gazebo, their designs range from simple rectangular braziers to graceful and unique design work.

Advantages and disadvantages

What are the advantages of building a brazier in a brick gazebo with your own hands? The main advantage of this building is cooking in any weather- protection from the sun, rain, snow and wind, as well as comfort - it is comfortably located in it dining area with lighting.

Installed mosquito nets will serve as additional protection against insects. Of the shortcomings, only increased requirements to fire safety and the impossibility of changing the location, so the choice of a place for construction must be taken seriously.

Choosing a gazebo project with barbecue

When the place for the barbecue is determined, we proceed to the foundation. A concrete slab on a sand cushion is required only at the location of the furnace, under its entire area. It is advisable to install the gazebo itself on aligned logs. Next, you need to decide on the project of the furnace, it is desirable to execute its drawing.

In the gazebo, has only base, plinth and brazier, here, if desired, you can make ledges for the barbecue grill. More complex options are stoves with decorative arches, concrete slabs for the work surface, as well as sink and niches for storing firewood.

The advantage of making a niche for firewood in the brazier is that it warms up, as a result of which the firewood completely gets rid of moisture, it is easy to melt them.

Material selection

After selecting a project, we determine the type of material. Brick should be used fireclay(furnace), as it is resistant to high temperatures. Clay with sand is well suited as a coupling material for masonry. Required tool.

Before you start building a brazier in a brick gazebo, we make a list of the necessary tools with our own hands, it is important that it is next to you throughout the entire construction process.

Shovel useful for digging a place for the foundation, as well as backfilling a sand cushion.
Master OK will serve to apply and level the mortar during masonry.
Roulette will not let you make a mistake in size.
Bubble level and plumb line will help to make the oven perfectly level.
Wood paneling will make masonry seams of the same shape.
Buckets. A tool for delivering mortar to the construction site.
Trough perfect for mixing mortar. It's a budget alternative. concrete mixer.

Foundation preparation, wall and roof construction

The foundation for the furnace is made as follows: a hole of the appropriate size is dug, crushed stone is poured onto its bottom. Next, prepare the mixture in proportion 1:3 from cement and sand.

This mixture is poured into the pit in layers, between each layer is placed reinforcing mesh preventing destruction of the foundation. It is important to ensure that the first row of the grid does not lie at the bottom of the pit, but right into the solution.

When the pit is completely filled, put ruberoid. For complete drying of the foundation, it is necessary 2 weeks. If the weather is hot, it is sprinkled with water.

Proceed to bricklaying only after the foundation completely dry. The preparation of a clay mortar for masonry occurs by soaking the clay for a week.

It is periodically stirred and water is added if necessary. The last step in the preparation of the solution is the addition of sand.

Sand add in small portions to a thick consistency. The density level is checked by placing a wooden stick in it. The solution should cover the stick with a thin layer and drain evenly. Upon receipt of such a density, the solution is considered ready.

The foundation for the gazebo itself is done as follows: 4 holes, poured with concrete to one level, after the bases dry out, from above roofing material is laid and logs are installed. The area inside the log is laid out with stones or paving stones according to the level.

Under the selected material is desirable put a film, this will prevent the grass from sprouting in the joints. Supports are made as follows: pits are dug, racks are placed, poured with mortar. Next, the upper logs are laid, rafters are installed on them, all this is fastened together anchor bolts.

Between the rafters crate is laid on which the roofing material is laid. The walls are being made optional, there are variants in which they are absent. But if it is decided to build, then boards are nailed vertically, horizontally or diagonally to the racks.

How to make a brick barbecue in the gazebo

Later two weeks after pouring the foundation, we proceed to laying bricks.

Attention! Place the brick in water for a few minutes the day before construction starts. This trick promotes better traction and also prevents the clay from dehydrating.

Before starting work on the foundation draw the contours the location of the furnace - this will serve as a cheat sheet. Construction starts from the basement. The first row is laid from the corners to the center along pre-drawn lines. Subsequent rows are placed with a shift of half a brick first in one direction and then in the other direction.

Reinforcing mesh is placed every 3 rows to prevent decay and cracking. When laying the mesh, the product is checked using level and plumb to prevent distortion of the structure. After the construction of the basement is completed, the laying of the firebox begins. The brazier is made of both brick and in advance cast concrete base.

Depending on the selected firebox, the following actions are performed: in the arched version, a circle is used. A gap is left between the bricks with the help of chips 1 centimeter wide. Next, the empty space is filled with mortar, and the whole structure dries up. 2 days.

CAREFULLY take the circle. A reinforced concrete beam or a reinforced corner is located on top of the firebox. It should also 1 brick row.

Small gaps left during masonry contribute to better combustion due to the penetration of more oxygen. If it is decided to make a place for a barbecue, then for the lattice are made ledges, and reinforcement is inserted into the layers.

It is desirable to do at different levels for more convenient use. The final stage is the chimney and wind walls. If desired, a pipe can be inserted into the chimney. To prevent the ingress of precipitation on the top of the chimney is installed metal visor.

How to arrange a brick barbecue in the gazebo

The position of the barbecue in the gazebo depends on its design. With the pipe version, there are two options for the location of the furnace: in the middle of the gazebo or from one of the edges. When the brazier is located in the middle of the gazebo, it is positive access to barbecue from either side. It becomes possible to install a bench on the back of the barbecue, on which it will be comfortable to be due to the heating of the wall.

The side mounting situation is more common. Thanks to this scheme, more free space, which is used at will. When choosing designs with a work area, smokehouse, oven and stove, the central location option will not work. For a stove without a chimney, the central location option is also not suitable due to the fact that smoke will pass through the entire building, and the risk of fire also increases.

The ideal option for the location of the barbecue in the center of the gazebo is a small, with chimney and double-sided firebox. In this version, it is possible to approach the brazier from both sides, which makes it more convenient and comfortable. Another advantage of such an oven is that it is completely protected from rain, snow and also requires less financial and labor costs.

The correct location of the gazebo on the site

Choosing a place for a gazebo. The ideal location is walking distance accessibility to the house and bath. First visually estimate the location. Being in the place where it was decided to place the building, it is advisable to examine the surrounding view, since the gazebo is not only a place for cooking, but also relaxation and a place for spending evenings.

Also the place must be level if there is no such place on the site, then we level the site. We lay out the path to this place from decorative stones or paving stones, and install decorative lanterns along the path.

Fire safety measures during operation

However, the issue of location should be carefully considered not only for aesthetic reasons, but also for the sake of fire safety.

Such gazebos are categorically it is forbidden to place near trees and wooden structures. The place of contact of the pipe with the roof of the roof must be fenced off asbestos sheet or thread, and cover all wooden elements with protective heat-resistant impregnation.

The floor is not allowed to be made of wood. It may get sparks. The ideal option would be a stone floor throughout the area.

It is advisable to make sure that a serviceable fire extinguisher is present, and there is a tap with water nearby.