Hand saws for wood: parameters, types and applications. Technical characteristics of a hacksaw for wood

In the arsenal home master there is always a functional and easy-to-use circular saw. But there are situations when you need to saw off a part and do a small amount of woodwork, and there is no time or desire to deploy and connect the unit. In these cases, a hand hacksaw perfectly saves. But how to choose a manual hacksaw for wood so that it is convenient to use and easily “gnaws through” any type of wood, we will consider in more detail.

The saw is rightfully considered the ancestor big family hand tools. Since the creation of the first type of tool from iron, the saw has undergone many changes, having managed to acquire numerous “sisters” capable of performing dozens of jobs.

AT household it is impossible to do without “toothy helpers”: they are indispensable for pruning the garden, small carpentry and joinery work

Hand saws for wood differ from each other in many ways: blade size, steel grade, tooth shape, handle design. Let's dwell on each parameter in more detail.

How should a hacksaw blade be?

The main part of the tool is a hacksaw blade. The first thing you should pay attention to when choosing a product is the length of the canvas. The possibilities of its application largely depend on this parameter. At the same time, the longer the canvas, the more springy it is, which also complicates the process, especially when working with hard rocks wood such as ash, maple or oak.

The long stroke makes it possible to apply less effort when sawing, since the cut is performed in one stroke large quantity teeth

For sawing small items such as a plinth, bars or narrow slats, you can get by with a hacksaw with a blade length of 25-30 cm. When planning to use the tool when performing more serious construction works, choose a product with a canvas of 45-50 cm.

When determining the length hacksaw blade follow the rule that the length of the saw exceeds the diameter of the processed elements by 2 times. If you do not follow this recommendation, you will only complicate your work. The teeth of a short hacksaw will stick inside the wood, and everyone will have to make a lot of effort in order to advance the tool to free it from sawdust. Uncomfortable work will cause premature fatigue.

Traditionally, the width of the fabric of the product varies in the range of 10-20 cm. Models with a narrower fabric are not allowed for technical reasons, since they fail at the slightest bend. But it should be borne in mind that too wide canvases are inconvenient for self made.

Of no small importance is the material of manufacture of the blade, which is most often alloyed steel, as well as its degree of hardening.

For hacksaws, tool alloy steel is used with high content silicon and carbon grades:

65G, 60 S2A;
8 HF, 9 HF, 9 HS;
U7, U7A, U8, U8A, U8G, U8GA, U9A, U10

Hardening of metal is carried out due to the impact on it of an alternating magnetic field, at which appears electricity high frequency. Spreading over the surface, it heats the surface layer of the metal, which hardens after cooling.

The standard parameter is the metal hardness of 45 HRC, but it is still preferable to choose products whose web hardness is 55-60 HRC. A hacksaw with a high hardness blade will have sufficient flexibility, but at the same time high tooth stability. With an external examination, such a tool can be identified by the darkish shade of sharpened teeth.

Blade tooth parameters

The determining indicator of the performance of the tool and the accuracy of cutting wood is the size of the teeth.

The teeth of a hacksaw for woodworking perform a dual function: they cut wood and simultaneously remove sawdust

Sawing accuracy is determined by the "TPI" indicator - the number of teeth per inch.

There is an inverse relationship between these technical parameters:

canvases with large teeth set a high speed of work, but the saw cut turns out to be rough and sloppy;
hacksaws with fine teeth guarantee a clean and precise cut, but at a relatively slow working speed.

When determining the required tooth size, one should be guided by the type of material being processed. For example, for work with chipboard, where high precision of the cut is required, choose a tool with a high TPI of 7-9, and for sawing logs and gardening, where the cleanliness of the cut is not so essential, choose a TPI of 3-6.

When choosing the best hacksaw option, be guided by the rule that minimum thickness the log must in any case be larger than the pitch of three teeth

If we compare a hardened and ordinary tooth, then the difference lies in the fact that in the first variant, provided domestic use the product does not dull for a long time. But a hacksaw with a hardened tooth can no longer be sharpened again. When she starts to cut badly, she will just have to be thrown away.

A normal tooth can be sharpened. Periodically, it can be performed using a special file marked with an accident (for sharpening saws). To sharpen the blade, it is enough to perform several movements on each tooth.

Three types are distinguished depending on the type of teeth used. hand saws:

For longitudinal sawing. Products are equipped with teeth in the form of an oblique triangle and look like hooks. The tool allows you to cut wood along the grain. Such saws have sharpening on both sides of the tooth, due to which they are able to cut both when passing forward and in the opposite direction.
For cross cutting. The teeth of the tools are made in the form of isosceles triangles. This design makes it easy to saw through the material both when the cutting edge is drawn forward and in the opposite direction. But this type of tooth is only suitable for working with dry blanks, but not fresh wood.
For mixed sawing. Products have a combined composition in which triangular edges are combined with slightly elongated semicircular notches. This solution allows, when moving the hand forward, semicircular teeth to perform a guide cut, and when returning, to expand the channel with triangular ones, removing chips and sawdust from it.

Some types modern instruments equipped with teeth, which are made in the form of a trapezoid. This solution allows you to make the canvas more durable and wear-resistant.

But it should be borne in mind that sharpening such a blade is very problematic, since it is difficult for trapezoidal teeth to give the desired shape. This significantly reduces the service life of the product, after which it is necessary to change the blade or purchase a new tool.

For sawing fresh branches, it is more convenient to use blades equipped with triangular teeth processed by parallel sharpening, in which each element is sharpened only on one side and in a checkerboard pattern

Often on the market you can also find a modernized type of hacksaws.

Upgraded hacksaws are easy to distinguish by the groups of teeth located on the canvas, between which the gaps are clearly visible.

Modernized type hand saws are effective for cutting raw wood. Wet chips through the gaps between the teeth in the process of sawing easily come out of the cut, without hindering the movement of the tool.

Types of hand saws for wood

A small narrow saw is a design that consists of a straight flat blade and a handle. They perform fine work: through cuts, cut out curved parts.

This type of tool is designed for sawing wooden blanks, the thickness of which does not exceed 8-10 cm, sawing small branches and small jobs in the garden

In the manufacture of narrow models, manufacturers install blades with triangular double-sided teeth, or with parallel sharpening. The disadvantage of the tool is that when pressed during operation, the canvas can deviate from a given direction.

Option #2 - normal

A standard hand saw can be fitted with any type of tooth and often comes with interchangeable blades. various types and execution.

To be able to saw off workpieces at a certain angle using a standard hand saw, you have to purchase special miter boxes

But despite the declared versatility of their application, it is not advisable to use saws of this type in the manufacture of furniture.

Option # 3 - with a butt

both narrow and conventional saws with an increase in the rigidity of the material being processed, they are prone to bending. In these cases, it is effective to use canvases equipped with a backing, which acts as a kind of stiffener.

Hand saws equipped with a butt are designed to create shallow cuts in wooden surface any thickness

The presence of the butt prevents the saw from making a cut deeper than the width of the blade, as it prevents the cutting blade from passing further into the tree.

Option #4 - archery

Bow-type saws are more bulky devices that act as an analogue of a jigsaw.

The main purpose of this type of saws is to create an accurate cut when working with surfaces located at any angle.

Due to the solidity of the design and the threaded connections of the handles, bow-type saws are able to easily overcome knots, cutting along radii and curvilinear patterns.

Depending on the purpose and constructive solution saws can be:

swing - for longitudinal cutting;
transverse - for sawing blanks across the wood fiber;
rounded - for cutting holes, making roundings and figured sawing;
spiked - for cutting connecting spikes, as well as sawing simple geometric shapes on a workpiece.

Only with a bow-type hacksaw can you cut the material up and down, sawing blanks with complex lines and doing the work alone without involving an assistant.

The procedure for choosing a hand saw for wood is quite simple:

Determine the purpose for which the tool will be used. For carpentry work, choose products with fine teeth that provide high sawing accuracy, for carpentry - blades with large teeth.
Application frequency. If the hand saw will only be used for occasional work, choose a tool with hardened teeth. The service life of this type of product is quite large. In addition, you do not have to worry about sharpening and setting teeth during operation.
Canvas uniformity. While inspecting the tool, try gently bending the blade to a 30-45° angle, and then release it. Re-examine the blade: the slightest deviation at the fold point, even within 2 mm, indicates poor quality of the metal.
Product cost. As with other tools, keep in mind that quality models leading brands are always an order of magnitude more expensive than consumer goods. This overpayment acts as a kind of guarantee of wear resistance and durability of the saw. But for one-time work, it makes no sense to spend money on an expensive tool.

Conventional handles are made of plastic. Prefabricated plastic handles made of two halves do not have sufficient rigidity. It is much more convenient to work with a tool that has a one-piece handle, which is equipped with a rubberized finger pad. Availability rubber insert allows you to make a tighter grip, preventing the formation of calluses on the palm.

Pay attention to the design of the tool handle: it is desirable that it has an ergonomic shape that allows you to correctly transfer force to the blade

On sale there are products with standard and flip-over handles. The second option is convenient in that it allows, if necessary, to replace the worn canvas with a new one.

Keep in mind that not all hand saws go on sale already sharpened. And this seemingly trifle largely determines how soon you can get to work.

There are many companies that manufacture hacksaws on the market. Judging by the reviews, they have proven themselves well: the Zubr hacksaw domestic production, Gross Piranha joint German-Chinese cooperation, Irwin Xpert made in the USA. They are famous for their decent quality at a low price, which varies between 10-20 USD.

Finally, we suggest you watch a video with tips on choosing:

Suppose we need to adjust wooden plinth or prune your garden. It would seem that we take a hacksaw and saw. What kind of wood saw do you use? No, the question is not at all idle. In order to be convinced of this, it is enough to go to any building supermarket or an online store that sells tools. Dozens of models are presented to our attention. And they differ not only in logos and price.

It seems to be a simple tool, but no, with wrong choice at best, we will not get the expected pleasure from work. At worst, since the author of the comment on the forum: “It seemed to me that saws were sold ready for use, i.e. already imprisoned and divorced. So how to choose a hacksaw for wood? What to look for: brand, length or price? We will try to answer this question in this article.

Main characteristics

The canvas is of paramount importance in this tool. The ease of use of the product and its service life will depend on the steel grade, the correct hardening procedure and successful sharpening. The choice of a hacksaw for wood is based on four basic characteristics:

canvas length;
tooth size;
steel type;
handle type.

The first criterion is the length of the canvas. It depends on the needs of the buyer, so for small bars, boards, etc. a 280 - 300 mm hacksaw is enough. For construction or summer cottages, a canvas of 450 - 500 mm is more appropriate. There are more. When choosing a model, you must clearly know what size wood you are going to cut. The rule is as follows: the length of the hacksaw should be twice the largest workpiece for which it is intended. You can do less, but the usability will be lost. This is due to several reasons:

this ratio allows all the teeth of the hacksaw to completely exit the log during cutting, and this is an effective removal of sawdust (it will not clog);
it is easier for the hands, with more sweeping movements, the hand does not get so tired.

Teeth size and sharpening. From this characteristic will depend on the accuracy of the cut and its speed. The rule is this: small tooth- clean and precise cut, but less speed; larger - a rough cut with significantly higher speed and less fatigue. This characteristic on hacksaws is referred to as "TPI", which means the number of teeth per inch (almost 30 mm). The larger the TPI value, the more “delicate” the cut will be. For example, for work with chipboard and fiberboard, this value should be at least 7 - 9. The cut surface will be smoother without a “torn” edge.

For work in the garden, the cleanliness of the cut is not so critical, especially for trimming or sawing logs. A more important characteristic in such work is the speed of sawing and the effort to be expended. To do this, we need a hacksaw with a TPI value of 3-6, the distance between the teeth is from 4 to 8 mm.

The classic shape of a tooth is a triangle. As a rule, such saws are of the sharpened type. The latest generation of hacksaws with hardened teeth are trapezoidal in shape. They are initially designed with increased strength and wear resistance. When it gets dull, we go, buy a new hacksaw or change the blade. With all the desire to sharpen it will not work: it is extremely difficult to repeat the sharpening angles, and even such steel cannot be filed. Provided that the production technology is observed.

Steel type. The standard metal hardness for a wood saw is 45 HRC. For teeth, steel with a hardness of 55 - 60 HRC is used. This type of hacksaw combines the flexibility of the blade with high wear resistance of the teeth. They are easily recognizable by their characteristic appearance- the teeth have a darker shade than the rest of the blade surface. These hacksaws are of the non-sharpened type. If the teeth are not hardened, they can be straightened and sharpened.

Lever. The number of calluses on the hands depends on its ergonomics. There are two options for the handle: flip or classic. The first option allows you to change blades, for example, in the Bahco Superior EX-19-XT9-C hacksaw model.

How to choose?

First of all, it is necessary to determine what type of tool is needed: carpentry or carpentry. The carpentry has a more accurate and clean cut, it is used mainly for dry wood. The cutting speed for this type of tool is not the main characteristic.

When choosing a length, be guided by your needs, i.e. what size timber or log are you going to cut. If the tool will be used infrequently, for example, on suburban area, choose with hardened teeth. The resource of operation of such a saw is large. In addition, correctly sharpening and setting teeth is its own science, and mastering it for seasonal work in the garden may not be appropriate.

The quality of the canvas can be checked upon purchase. To do this, take a hacksaw and see how smooth the canvas is. Next, bend the canvas to tangible resistance and release. The zeal of the fold should be slight, do not break. After that, look at the evenness of the blade at the bend, if the deviation is more than 2 mm - the steel is not of very high quality.

The teeth of a hacksaw have a dual role:

cut wood;
remove sawdust.

The lower the number of teeth per inch, the greater the cutting speed and the less clogged with sawdust. Hacksaws with up to 7 teeth provide high performance with little user effort. True, accuracy will suffer from this. But even here it is necessary to look for a golden mean, because. the greater the distance between the teeth, the less cutting surface. As a result, performance will drop. The best option there will be the following rule: the minimum thickness of the bar must be greater than the pitch of three teeth. Otherwise, it will be flour, not cut.

Hacksaws can be with a longitudinal and transverse cutting method. Longitudinal blades are easy to recognize by the angle of inclination of the teeth; such saws cut only from themselves. Usually their length does not exceed 50 cm, they have an acute cutting angle - 75 - 800. Most of the models presented in stores can be attributed to hacksaws with a cross cut. They have sharpening on both sides of the tooth. That allows you to cut both when moving forward and backward.

One of the determining criteria for choosing a hacksaw for wood is the price. As with everything else, quality products from leading brands will cost more than Chinese brands. This overpayment, in fact, is a guarantee of durability and wear resistance of such a tool. And with hardened teeth, this is very important, it will depend on it shared resource operation of such a tool. It does not lend itself to sharpening. Leading manufacturers exercise tighter control over the choice of steel grade and hardening technology. And as we discussed above, even the shape and pitch of the teeth of such a tool will affect a lot. Starting with the convenience and effort expended, ending with the accuracy and evenness of the cut.

Models to look out for

The models below are highly good feedback both according to the results of specialized tests of the tool, and according to the opinion of the users themselves. For convenience, all models will go according to an increasing price category, from budget to professional wood saws.

Hacksaw for wood Zubr Expert It has a very comfortable plastic handle. The teeth are hardened, triangular in shape with two cutting edges. Suitable for both longitudinal and transverse sawing. The length of the blade, as well as the number of teeth per inch, the user selects independently, the variations of this model are different. It cuts well on any type of wood. This tool suitable for carpentry work, because controllability and cutting accuracy at height. For the garden, you can choose a model with a lower TPI value. The cost is from 12 to 15 USD.

Hacksaw Gross Piranha also available in several versions. Canvases Available different lengths(from 400 to 550 mm) and different amount teeth. The saw is made of hard steel 52 HRc, teeth, hardened 66 HRc with triangular laser sharpening. Cuts straight and clean. The Piranha hacksaw has a Teflon coating, which significantly improves the sliding of the blade and allows you to get clean cut edges. The cost of this tool is 12 - 15 USD.

Hacksaw Stanley General Purpose. This tool is produced by a French company, has good quality and not a high price (about $12). Designed for both longitudinal and transverse sawing. Length 500 mm with TPI 8. Hardened teeth. The cut is easy, without additional effort. An excellent purchase for a summer cottage.

Hacksaw Irwin Xpert. Highly good tool for a reasonable cost, from 20 c.u. Washed down easy, the cut is even and smooth. When sawing hardwood, the force on the hand does not increase significantly. Good handle ergonomics. Length 500 mm, teeth, hardened with proprietary geometry, TPI 8.

Hacksaws Sandvik(in the past), and now it is a well-known tool under the Bahco brand. Pilam Bahco with proprietary XT geometry there are practically no equals, this is already a category professional tool. Noteworthy is the Bahco ProfCut PC-19-File-U7 model. This is one of the few saws that can be sharpened. Convenient, 475 mm long hacksaw. Cuts smoothly and easily. Cost from 20 c.u.

By the way, you can get the quality of the Bahco company, and at the same time save money, when buying a hacksaw under the brand name "Tescha". This instrument comes to Russia from two countries. If you purchase with the mark "made in Sweden" - you will have in your hands a tool from the Bahco factory, with its level of quality.

Hacksaws for wood differ in the size of the cutting teeth. This parameter determines how the cut will turn out, what types of wood the hacksaw is suitable for and how easy it will be to work with it. But besides this, there are other characteristics that you should pay attention to when buying a tool. Therefore, the question of how to choose a hacksaw for wood is relevant and requires a thorough approach.

For a hacksaw on a tree, the following matters:

canvas length,
canvas width,
canvas steel grade,
lever,
tooth size.

The length of the blade affects not only the width of the cut wooden workpiece, but also greatly simplifies the work. The long stroke allows you to make less effort, since in one movement the cut is carried out by a large number of teeth. On the other hand, the longer the canvas, the more it springs. When dealing with hard woods such as oak, maple or ash, the saw will cause a lot of inconvenience and will quickly become dull.

FROM practical side short hacksaws, with a long cutting edge up to 30 cm, it is more expedient to use for small one-time work. They are suitable for those who live in an apartment, as they do not take up much space. Accordingly, in a private household, it is better to immediately buy a long saw (45-50 cm). This will allow you to work not only with blanks, but also to cut trees.

Usually the web width is between 10cm and 20cm. More narrow options are not allowed for technical reasons (they will break at the slightest bend), wider ones are too inconvenient for manual work. When choosing a hacksaw for wood, it should be remembered that thin workpieces are easier to cut with a narrower blade, and thick ones (tree trunk, roof logs, etc.) - with a wide one.

For hacksaws, alloyed tool steel grades are used:

U8GA,
60C2A.

All of them are certified by GOST and are characterized by a high content of carbon (0.7 - 0.8%) and silicon (0.1 - 0.4%), which makes the steel durable and resistant to fracture. Other steel grades do not meet the technological requirements for the product.

Conventional handles are made of plastic. It is advisable to choose a handle with a rubberized backing for the fingers. This will allow you to make a tighter grip and protect your hand from calluses.

The teeth of the saw are the most important part of the tool, so it is worth dwelling on them in more detail.

Varieties and purpose of teeth

Allocate the following types teeth:

for longitudinal cutting
for cross cutting
for universal cutting.

Longitudinal cutting is usually carried out either circular saw(round saw blades), or with a jigsaw. But there are also hand saws for these purposes. As is the case with electric counterparts, the teeth on the saw resemble hooks. The angle between them is allowed 40-55 degrees.

The hook shape allows cutting in only one direction. It is preferable to cut along the fibers. Then the hacksaw easily penetrates through the tree and the cut is obtained as even and accurate as possible. The choice of such a hacksaw is appropriate only for those who have a desire to make furniture on their own. Since it is not suitable for any other purpose.

Tooth for cross cutting is the most common. Outwardly, it looks like an isosceles triangle. The angle between the teeth is 40-50 degrees. This design allows you to cut equally well both when moving the cutting edge forward and backward. As a result, cross-cutting is carried out as accurately as possible, quickly and without much effort. When buying a hacksaw, it is important to consider that this type of tooth is only suitable for dry workpieces. The saw will tear fresh wood, and the sharpening will deteriorate.

For fresh branches, triangular teeth with parallel sharpening are used. This means that each tooth is sharpened in a checkerboard pattern and only on one side. As a result, a free channel is formed between the teeth inside the cut, through which wet sawdust can freely exit the cut without hindering the movement of the saw.

Another option is the combined composition of the teeth. It combines triangular with semicircular. At the same time, semicircular elongated teeth are longer than triangular ones. When the hand moves forward, narrow long teeth make a guide cut, and when the hand returns to its original position, the triangular tooth expands the cut channel and removes sawdust and chips from it.

It should be remembered that the smaller the angle between the semicircular and triangular teeth, the more accurate the cut will be.

It is better not to buy hacksaws for universal cutting, they are usually equipped with various tooth compilations, which in theory should do the job equally well. But in practice, such saws become dull much faster, and their sharpening often costs more than a new hacksaw.

And most importantly - in any high-quality hacksaw, the teeth are always made of hardened metal.

Types of hand saws for wood

There are several types of hacksaws, including:

narrow
regular,
with collar,
beam.

A hacksaw for wood, the price of which is the lowest, is a narrow hand saw. This option is suitable for gardening, sawing branches and small work with wooden blanks. Usually, either parallel tooth grinding or triangular double-sided teeth are used.

It is important to understand that it is possible to work with such a saw only with workpieces whose thickness does not exceed 8-10 cm. Too short a blade does not allow you to create a lever, therefore, sawing thicker parts will require a lot of physical exertion.

Conventional hacksaws are made with any type of teeth. The choice depends solely on the purpose for which you plan to buy a tool. Attention should be paid only to the fact that it is extremely undesirable to work with such hacksaws in the manufacture of furniture. Or you should buy special miter boxes to be able to saw off at a certain angle.

Hand saws with a back are used as additional tool. Their main task is not deep cuts in the workpiece.

Bow saws are an analogue of an electric jigsaw. They allow you to make the most accurate cut and work with any workpiece at any angle. Allocate:

swing,
transverse,
circle,
spiked.

Sweep saws allow you to make rip cuts. On the market there are canvases from 40 to 80 cm in length. Longer workpieces can only be sawn with an electric tool.

Crosscut saws are designed for sawing workpieces across the wood fiber. They make a cut both at right angles and at any other. In this case, perfectly smooth edges are obtained at the place of the cut.

Circular saws are narrower and are used for shaped sawing. With their help, make rounding and others complex elements. Distinctive feature– use of especially flexible grades of metal.

Tenon saws allow you to make simple geometric figures on the workpiece.

feature bow saws is that the mechanism for fastening is made or bought once, and the saws themselves are not sharpened, but new ones are purchased (as for hacksaws).

Recommended Hand Saw Manufacturers

Professional hacksaws for wood are distinguished by quality and compliance with the declared parameters. Buying goods from trusted manufacturers, you will be sure that the tool will last a long time and reliably. Among the verified firms, it is worth highlighting:

bahco,
Stanley,
Gross,
Sandvik.

Bahco is a Swedish company that is part of the SNA Europe Corporation. For more than 200 years of history, the manufacturer has never changed the main concept - the production of affordable quality hand tool. Bahco hacksaws are distinguished by durability, and a pleasant price from 500 rubles.

Sandvik wood saws are sometimes found on the market. This company is part of Bahco, so the quality of the products corresponds general requirements concern.

The American manufacturer of hacksaws for wood, Stanley, also emphasizes the availability of its products. The company is distinguished by an extensive staff of designers and engineers. Thanks to their work, the hacksaw blade and cutting edge differ from the Russian GOST, but this does not affect the quality in any way. This company is ideal for those who buy a hacksaw for the country. Since the combined teeth allow you to carry out any kind of cut. Price from 400 rubles.

The German company Gross is younger than its opponents. The competitiveness of its products is achieved by very low prices(from 250 rubles). Nevertheless, the products are of sufficient quality and comply with all domestic technical standards. The only downside is that the range of products is quite small.

There are also domestic producers which offer relatively inexpensive and quality options. Among them:

bison,
Piranha.

The Bison hacksaws are made in China, but meet the requirements for steel and teeth. Of the minuses:

should not be left outside (it rusts quickly, even with slight humidity),
time of continuous work no more than 10 minutes (rest 15 minutes),
not suitable for working with hard woods.

Despite this, these hacksaws will come in time for cutting garden trees.

The Piranha company is relatively small and has not been operating for a long time. Like everything new, its products are very affordable (up to 500 rubles) and are of high quality. Piranha hacksaws are presented in just a few models. The country of origin is China. But, unlike the Bison, the products of this company are covered with protective Teflon, which protects the tool from corrosion, even if you forget it in the rain.

The saw is one of the oldest tools used by man. Today's variety strikes the imagination of the buyer.

However, when buying an instrument, you want to get one, and if possible, a universal copy. In an ordinary store, you can at least hold the tool in your hands, feel the cutting part (the vast majority of tools, fortunately, are sold ready-to-use - that is, the teeth are sharpened and set apart).

Taking a hacksaw in your hands, you can appreciate the convenience of the handle. However, it is unlikely that you will be offered a "test drive" - that is, you will not be able to try out the tool in practice.

When buying a product in an online store, you can only navigate by photos, descriptions and reviews. This makes it even more difficult to choose a hacksaw for wood. In the article we will talk about the features of the tool, and help you make the right choice.

Existing types of hacksaws

To understand what kind of wood saw better fit just for you, consider its device and types

With the design, everything is simple - the tool consists of a cutting blade and a handle. Moreover, these two elements can be connected rigidly or articulated, change the angle of connection or even form a folding mechanism.

Hacksaws with interchangeable blades are widespread. This allows you to get a whole set for various purposes, saving at least on the handles.

This refers to the characteristics of comfort and profitability. The main types of hacksaws differ in the following parameters:

Canvas type

Comparing two hacksaws by the quality of the cut, you can determine which one is better.