How to cover a door with self-adhesive film. How to decorate a doorway Wall decor around the door

Sections of the article:

Before you start finishing the doorway, you need to take into account the design, style and color scheme of the future door and hallway. If you have not yet decided how and with what material you are going to decorate the doorway, then pay attention to the design of the front door itself.

The elements around the door, in addition to their decorative function, can also serve as effective thermal insulation, and the plane of the slopes will close the joints between the wall and the door frame.

Slope finishing technology

Construction or renovation causes a lot of trouble for many people, requiring a lot of effort and time. The process of installing and finishing a door opening is in many ways similar to finishing window slopes. Not only the canvas must be put in order, but also its framing.

If you decide to do the finishing work yourself, you need to first become familiar with the technology for finishing door slopes.

Some rules for carrying out work

Install the door frame first. Then seal any gaps between the wall and the plaster, removing the old coating and any loose pieces of plaster.

Plastering slopes should begin on a previously primed surface. Don't forget about additional precautions against fungus. To do this, treat the surface with a strong primer or add it directly to the solution. As soon as the opening is smooth and the solution has dried, you can begin painting or lining with decorative material.

However, before this it is necessary to check the evenness of the slope angles using a level. If a deviation from the norm is noticed, alignment is necessary. All excess mortar must be removed with a spatula; the surface of the slopes must be even and smooth. The upper part must be strictly horizontal and parallel to the floor. The sides are also parallel to each other. The depth along the entire parameter of the doorway should not narrow.

Finishing the opening will increase the sound and thermal insulation of the room. To complete the design of the opening, use a platband, which should match the door in color and texture and be securely fastened.

A high-quality finish for the appearance of a doorway is very important. It makes the front door attractive and ennobles appearance entrance group. The color of the front door should be combined with the finishing material and fit harmoniously into the interior of the hallway.

You can finish the openings without plastering. First, protruding parts that interfere with the installation of the frame are removed. metal profile or wooden beam. Then a frame is mounted to attach the finishing parts ( ready-made options made of wood or plastic). You can immediately install light switches, lighting, and communications for cable television or wired Internet.

Door opening finishing materials

The simplest way to decorate a doorway is to paint it. You just need to choose a shade of paint that matches the color of the door.

The best option is to finish door slopes with plaster. Using the solution it is possible to obtain an almost perfectly flat surface. This design of the opening makes it possible to obtain high-quality and durable finish. In the future, simple repairs will eliminate any shortcomings that appeared during the operation of the doors.

The advantage of this type of finishing is as follows:

No voids or so-called “cold bridges” will form under the plaster;
The slope will not bend. The surface of the opening will perfectly withstand humidity and sudden temperature changes.

If there are thick walls, the slopes are quite wide. In this case, it is better to use drywall. By installing it in the opening, you will make its walls warmer. Drywall covers the joint between the wall and the door frame well. The surface will be clean, smooth and aesthetically attractive. In addition, working with this material is simple and convenient. When finishing slopes you can use finishing putty as adhesive composition for drywall. But it is best to attach it with special glue.

Slopes with wood trim look great. It never goes out of fashion and always matches any interior. Instead of wood, you can install laminated lining. Its texture is similar to real wood. However, it is not recommended to finish the door slopes on the outside side facing the street, since it will not last long if exposed to the external environment.

Ready-made PVC and MDF panels are also used to finish the opening. They will give the slopes an aesthetic and respectable appearance. They must be installed from the outside of the room. This material hygienic and durable, harmless to human health as it does not contain toxic substances in its structure.

Wood-look plastic.

To imitate a wooden structure, plastic panels are suitable. They are a very popular solution for finishing works. To give contrast to a wall covered with light wallpaper or painted with light shades of paint, dark panels are suitable. This solution will emphasize the sophistication and rigor of the interior. As a result, the hallway space will seem wider than it actually is. Care similar panels simple and unpretentious, they are easy to clean using ordinary products.

When purchasing finishing materials in stores, be sure to pay attention to the manufacturer. Factories with a good reputation guarantee excellent quality of goods and will certainly offer the best finishing materials.

Door openings with trim look beautiful plastic panels. They are best suited in cases where the door opening has a non-standard shape. The material can be used in combination with any hallway interior; you just need to choose a color similar to the front door. The panels are installed quickly, and an inexperienced person in construction matters can handle their installation. The finishing material is cut exactly to the size of the opening. Seams and joints will not be visible on the plane. The final appearance of the opening looks neat and aesthetically pleasing.

Using laminate, the finishing of door openings can be given any shape. This material is environmentally friendly and very durable. However, it does not like moisture. Therefore, it is better to install it only from the inside.

Finishing the door opening in accordance with the interior

Initially, when planning the decoration of a house or apartment, you need to choose the most optimal design solution. This is not always easy to do. However, today there are many on sale available materials. If you have any doubts, you can use the designer's recommendation.

The choice of method for finishing the doorway deserves special attention. Therefore, upgrading the entrance to the house is a responsible task. The decoration of the doorway largely depends on what material will be used to decorate it and how suitable this combination is for the entrance door.

Keep in mind that the design of the front door is constantly in motion. In addition, it is susceptible to external factors. These include: wind, frost, dirt, shock and sunlight (especially if the door is installed at the entrance to private house). Taking this into account, for the door opening you need to select not only high-quality finishing material, but also pay attention to the choice of good fittings.

To prevent noise from entering and leaving the room through the door, sound insulating material should be installed. The fastenings of the door and opening must be strong, providing good protection against illegal entry into the home.

Remember that even the most luxurious front door, after it is finished construction work, will not look presentable if the opening around it remains unfinished.

Doorway shape

It is also important to choose the appropriate shape for the doorway.

A rectangular opening looks beautiful when a wide platband is used to decorate it. It is this that significantly influences the overall perception of the hallway interior. Such an opening may require additional decor, adding gloss and attractiveness to the entire structure of the front door.

When choosing an arch to decorate a doorway, you should take into account the overall style of the interior of the house. Today this is one of the most popular options for designing a doorway. However, everything must be done in the same style as other rooms in the house. Try to exclude the presence of massive and bright decorative elements, they make the opening heavier. It is not necessary to make the arch round. You can make it ellipsoidal, asymmetrical or trapezoidal.

Do you want the door slopes to be finished in the form of an arch? There are quite a few ready-made solutions for doors. The appearance can vary depending on the owner’s requirements; it can be airy or openwork. In this case, the doorway will fit into virtually any hallway interior.

Use of decorative stone

IN lately Decorative stone has become quite often used in finishing work. It is considered a stylish decorative element and is in demand in the design of door openings. With this design of the front door opening it will be possible to significantly improve the decoration of the hallway.

Conclusion

In conclusion, I would like to note that there are many options for designing the front door opening. The main thing is to do between them right choice, which often causes difficulties.

Even a non-professional can cope with decorating slopes. It is only important to know the features of the technological process when performing work and the capabilities of the material chosen for finishing, and take it into account operational properties. Not only the decoration of the doorway, but also the appearance of the room in which the door is installed depends on this.

It is the door itself and the openings that catch the eye of the person entering the house. Therefore, even the smallest flaws will be noticeable. The entire look of the room can be ruined if you just make a small mistake in choosing the color of the finish, not to mention poor quality installation work.

To increase space, as well as simply for aesthetic purposes, interior partitions remove door blocks. When remodeling an apartment, a free passage is most often created between the hallway and the living room. No less popular is an opening without a door, combining the kitchen with the living room. The expansion of space occurs due to getting rid of the dead zone reserved for opening the sash. However, redevelopment creates a new problem associated with the design of a doorway without a door, which is sometimes difficult for the owner to solve.

Not every opening in a house can be left without a door. The open passage of a bathroom or pantry will look ridiculous. The kitchen, bedroom and office are considered a secluded area, but for these rooms there is an exception to the rules. To organize intimacy, openings are decorated with curtains, sliding screens and other similar devices. As a result, a visual illusion of separation of rooms is created, while the space remains without a dead zone.

Open passages emphasize the integrity of the living space. All openings are made of the same shape and decorated with material similar in structure to create a single ensemble.

The door leaf is removed when creating an opening between the kitchen and living room or when one of these rooms is connected to the hallway. However, it is advisable to provide visual separation at least with curtains.

If a gas stove is installed in the kitchen, for safety reasons the room will have to be fenced off with at least a sliding system.

Free passage is arranged when combining a hall or kitchen with a balcony. The process involves the simultaneous removal of the door and window frames. If an office or small bedroom is set up on the balcony, the rooms are separated by curtains or a screen.

When we are not talking about fencing off the kitchen with gas stove, the passage is often decorated with shelves. Climbing flowers, figurines and other elements are placed on decorative shelves.

Getting rid of the door doesn't just open up the space. Air circulates freely through open passages. Even in a small apartment it becomes fresher in summer.

When creating an opening, doors are not required in the following cases:

A modern solution when performing redevelopment is an interior portal, which allows you to maintain the rectangular shape of the opening. Without a door, the passage becomes freer, and the decoration from massive decorative elements adds aesthetics.

Arched passages are popular. In an apartment with high ceilings, they give preference to the classics, arranging the opening in a semicircular configuration. For a building with low ceilings, it is advisable to visually raise the walls with an elliptical arch.

The door block is abandoned by owners who like passages of the wrong configuration. When designing, asymmetrical arches, triangles, and trapezoids are in demand. A rectangular portal looks beautiful, the corners of which are rounded at different radii. The only drawback is the limited passage size. It will not be possible to create an opening if its width is less than 80 cm.

Doors are abandoned when the passage is decorated with a bar counter, stained glass elements, and mosaic fragments. Often such techniques are appropriate for studio apartments.

Advantages and Disadvantages

If you compare a beautifully designed open doorway with a door block, you will be able to identify a number of advantages:

The integrity of the space of the combined rooms is created. The apartment becomes free, bright, while maintaining the functionality of each zone. The kitchen remains a kitchen, the living room remains a living room.
When framing the doorway, materials that do not require complex maintenance are used. The absence of a sash eliminates loosening of the frame and the formation of a dead zone.
Without a door leaf, the opening can be given an original configuration, allowing you to emphasize the interior style of the entire room.
Decorating an interior portal with even the most expensive materials will be more cost-effective than installing a high-quality one door block.

The disadvantage of an open passage is that it cannot be used for storage. With any type of design, a passage without a door is not able to provide intimacy for a specific purpose area.

Free ventilation through open openings will bring great inconvenience when combining the kitchen with living rooms. Smells from cooking, along with fat vapors, will spread throughout the apartment.

Forms

You can design the opening while maintaining the original configuration or modify the passage. Often the shape of the structure depends on the materials used for finishing. The skill of the master plays an important role.

Of all the types of doorways, the simplest option is the classic rectangular shape. An inexperienced person can assemble such a structure. To create an opening, remove the entire door block along with the frame. The ends of the walls are trimmed along the contour decorative cladding. If it is difficult to dismantle the hatch, you can remove only one flap. Cover the remaining frame elements with MDF or plastic. The disadvantage of this method is the narrowing of the doorway due to the remaining elements of the frame.

In the case of arched openings selection of forms huge:

Considered a classic semicircular arch. The transition is suitable when combining any rooms. If the apartment has low ceilings, it is better to abandon the semicircular arch or widen the passage.

Arches trapezoidal forms are easier to manufacture, suitable for apartments with low ceilings, are often installed when combining a kitchen with a living space. However, designers rarely use the trapezoid due to its association with the shape of ritual accessories.

Fans of unusual configurations prefer triangular arches The design has many subtypes, more suitable for spacious rooms with high ceilings.

Modern apartments are increasingly equipped with doorways asymmetrical forms. The structure is easier to make from plasterboard. For registration use LED backlight, arrange niches, shelves and other decorative elements. Asymmetrical designs make it possible to hide large defects in the passage and the interior partition itself.

How to decorate a doorway?

When decorating an opening without a door, almost any material used for wall decoration is suitable. Budget option is plasterboard construction followed by painting or wallpapering. It is optimal to choose gypsum boards when manufacturing a device of an asymmetrical shape. Plastic or MDF will be cheap.

Of the more expensive materials, artificial stone, tiles, and valuable wood species are used to decorate the doorway. The pinnacle of art is the design of a passage with stucco.

When choosing the option of finishing a doorway without a door, you need to take into account the style of the entire room. The design should harmoniously fit the passage into the interior, and not highlight it with a separate structure.

There are two types of portals in the apartment: full - with a top and side elements, double-sided - only side edges without a top. Similarly, they provide for the installation of a threshold and platbands or abandon these elements.

Installation of slopes and plasterboard arches

If you decide to create a doorway without a door with your own hands in the shape of an arch, it is better to use drywall for decoration. The sheets are inexpensive, easy to cut and install. When making an arch, a frame is assembled from a galvanized profile. The structures give the shape of the future opening. The frame is sheathed with fragments cut from gypsum board sheets. Fixation occurs with self-tapping screws. The finished arch is treated with a primer, a perforated corner is glued, putty is applied, and after drying it is sanded.

If there is no desire to build an arch, the slopes are simply lined with plasterboard. To further refine the doorway, use paint on water based or wallpapering.

How to decorate a doorway with stone?

The finishing of the portal with decorative stone looks stylish. The material is made from natural chips with the addition of coloring pigments and polymers. When framing an opening, smooth boundaries are rarely adhered to. Most often, preference is given to torn edges. To aesthetically decorate a doorway indoors, use a stone with a small, almost smooth relief pattern. Elements with deep texture create a bulky design. They are used to finish openings entrance doors from the street side.

Decorative stone cuts well, but for corners it is better to use ready-made corner elements. Installation is carried out with tile adhesive or liquid nails.

Finishing with additions and platbands

It will be possible to simply and tastefully decorate a rectangular doorway made in the form of slats. The elements are made of wood, MDF or plastic. The latter look less aesthetically pleasing.

They are made from MDF: regular, with an edge at the end, and telescopic. In the first version, the edge of the bar is without decorative covering. You need to fit the joints tightly. Extensions with edges have a finished look. The end is sealed with decorative film and in case of flaws the joints look presentable.

They are produced in flat, rounded and other shapes. Wooden planks can be decorated with carvings. The elements are installed using glue, nails or self-tapping screws. Telescopic platbands are fixed with a lock to a pre-fixed strip.

Finishing the interior doorway with MDF

MDF panels will make a beautiful and inexpensive finish for the portal, but trims are also selected from a similar material. The disadvantage of cladding is the fear of dampness. MDF is better do not use to design a passage connecting the kitchen to the living space. If above the stove is organized good system hoods, then the material is not at risk of dampness.

To sheathe a doorway with MDF, first build a frame from wooden slats. The panels are cut to size and secured with special metal clips. The planks are joined together using a tongue-and-groove joint.

MDF panels without locks are placed on adhesive solutions. The frame is not being built. To glue the planks, prepare a perfectly flat surface. The joints are covered with a decorative strip, and the edges of the passage are framed with platbands.

Decorating a doorway with plastic

The principle of decorating an opening with plastic is reminiscent of finishing MDF panels. Only the material is different. PVC plastic panels are fixed to the frame with fastening clips or glued. The completion of the frame is a platband made of a similar material, attached to the guide strip.

PVC panels trim doorway rectangular, semicircular and other configurations. Stores sell ready-made kits for cladding arches; you just need to select the product according to the size of the passage.

Advantages of polyurethane stucco molding

Gypsum stucco is rarely used due to its fragility and heavy weight. If the apartment has high ceilings, and the Venetian or other similar style is chosen for decoration, then the doorways are decorated with polyurethane elements. The material is non-fragile, lightweight, and can be painted.

To install such stucco molding, prepare a flat, durable surface. Pre-treatment is carried out with a deep penetration primer. The elements are secured with an adhesive mixture. After the glue has hardened, the joints are puttied and then sanded with sandpaper.

Wood finishing

Lovers natural materials they prefer a portal made of wood, lined with extensions and platbands. When making a door portal with your own hands, you can even use cheap pine wood. After good sanding, treatment with protective impregnations and painting with varnish, the material will be difficult to distinguish from valuable wood. You can decorate the wooden portal of a doorway with carved ornaments.

The elements are being installed on the frame. First, level planks are attached to the slopes, then platbands are installed. The doorway lining is fixed with self-tapping screws. The caps are recessed in drilled secret holes, and the top is rubbed with putty. I glue the platbands and secure them with nails or self-tapping screws.

Decoration with curtains

A simple option to decorate doorways without a door is to hang curtains. The whole process consists of fixing the cornice over the passage. Curtains will hide the opening without a door from view, distract attention, and will not clutter up the space. The main requirement is not to use curtains with horizontal opening. They will become an obstacle to free passage. It is optimal to use curtains for doorways with vertical closure. When open, the curtains are tied to the wall.

If you make every effort, you can decorate a free interior passage better than a door block. If expensive materials are used, it is advisable to take advice from experts so that the costs are not in vain.

As you know, doors do not last forever, and anything can happen. For example, scratches, chips, and cracks often appear on the door leaf. In this case, you can repair, replace or carefully decorate, hiding all defects.

To decorate a door, you can use not only paper, vinyl and non-woven wallpaper, but also fabric or liquid.

In this case, the canvas should be prepared by removing a layer of paint in advance, filling up uneven areas, cracks and sanding the surface. A layer of applied primer will provide additional adhesion of the wallpaper to the surface of the door.

You can wallpaper both the entire canvas and the panels by cutting out pieces of wallpaper of a suitable size. Don't forget to choose an adhesive that matches the type of wallpaper and dilute it according to the instructions.

Wallpaper classic

Lubricate the cut wallpaper with glue and apply it to the door, making sure that there are no jams or distortions. Smoothing out the wallpaper soft cloth, roller or wide plastic spatula. Carefully trim off the excess with a utility knife. Additionally, you can decorate it by gluing a frame made of foam plinth on top of the wallpaper.

While the wallpaper is drying, it is advisable to close the windows in the house and prevent the appearance of drafts and sudden temperature changes.

Textile

A door decorated with fabric looks very unusual and attractive. In addition to standard surface preparation, attention should be paid to the fabric itself, determining the degree of shrinkage.

We cut off a small piece of fabric, measure its dimensions, moisten it with water and dry it. After drying, we take measurements again, comparing the readings and finding out the degree of shrinkage. If the value is large, then the entire piece of fabric is also moistened and left to dry before decorating.

Pay attention! You can use not only a single piece of fabric, but also cut pieces of different colors and textures. This technique is called “patchwork” and is often used by designers in interior design.

For fabric, casein glue, a composition based on CMC, as well as Bustilat or Gumilax mastics are best suited. Apply the adhesive to the fabric and apply it to the door, smoothing it with a spatula. When covering a door with fragments, it is important to ensure that they are geometric, otherwise the work will look sloppy.

Additionally, you can decorate the door with beautiful furniture nails, shiny nylon or leather cords, fabric paint, and baguette frames.

- universal. They cover not only walls, but also doors, creating unimaginable patterns and compositions. In this case, you don’t have to bother with cutting the canvases. However, the door cannot be exposed to moisture. Therefore, this method is unacceptable for decorating a door in a bathroom or kitchen.

To work, you will need a dry wallpaper mixture, several spatulas of different sizes, a hopper gun, a roller, a clear varnish, and a color scheme.

Decorate the door with a mirror

Very unusual finishing doors can be made using mirrors. Such decor will not only attract everyone’s attention, but will also visually expand the space of the room and add light. However, cutting and attaching a classic glass mirror is very inconvenient, fortunately there is an alternative - acrylic panels with amalgam, which has excellent reflectivity.

Acrylic mirrors are available in a wide range color scheme. You can choose any shade you like or several to make a mirror panel. Plastic panels do not break, are easy to process and attach to the door, and are light in weight. The cost of mirrored plexiglass is not the lowest, but the quality and aesthetic qualities fully correspond to the stated prices.

Thickness	Color	Brand	Sheet size, mm	Price per sheet, rub
2	silver	SPD (Italy)	1220*2440	5950
2	silver	Plexiglas Mirror (Germany)	2050*3050	11150
3	silver	PLASKOLITE (USA)	2050*3050	14000
3	gold	PLASKOLITE (USA)	2030*3050	15700
3	gold	Plexiglas Mirror (Germany)	2030*3050	16000
3	red, blue, green, orange, yellow, black (color opaque)	Extruded acrylic glass ZENOCRYL OPAQUE XT	2050*3050	10989
3	colored transparent (red, orange, yellow, light blue, blue, green, purple)		1220*2440	5453
3	fluorescent transparent (yellow, pink, brown)	Cast acrylic glass ZENOCRYL TRANSPARENT	1220*2440	5075

Before attaching the mirror plastic to the surface, you should carefully level the surface by deepening the heads of the nails, sanding off and covering with putty all the irregularities/recesses.

On the door and reverse side Acrylic canvas must be coated with a deep penetration primer. After it dries, the cut panels are secured with double-sided tape and assembly adhesive. For convenience, use mounting suction cups; with their help, it is much easier to carefully glue the panels to the door leaf.

As one of the decoration options, you can consider shaped acrylic mirrors. Such a mirror can be attached in the center of the door or you can purchase several elements and arrange them beautifully. Usually small parts are produced with an adhesive layer already applied.

Even from this simple material, like buckwheat husks, excellent work is obtained. The cost of the material is minimal, but the service life of such a coating, unfortunately, cannot be called too long.

Step 1. Remove the layer of old paint and existing vinyl covering from the door, and remove all unevenness with putty.

Step 2. Remove the door from its hinges and place it on the floor/stools/table. We paint the door leaf with dark brown paint. If there is one on the door glass inserts, we protect them with masking tape.

Step 3. Thickly coat the dried door with PVA glue, lay out the husks, distributing them with your hands. If necessary, add small gold sparkles.

Step 4. Cover the door with transparent varnish (glossy or matte). It is advisable to apply three layers in order to properly fix the buckwheat on the door leaf.

The beautiful door is ready. To ensure that the door does not stand out from the overall design of the room, decorate the picture frame in the same way and place the creation on one of the walls.

Decorating the door in vintage style

Vintage is sophistication and sophistication, the beauty of artificially aged things, in harmony with the chic of individual decorative elements. A door in vintage style will become a work of art, an exclusive element of the interior.

For decoration you will need:

We will combine painting the door with the decoupage technique and in addition we will add decorative elements. We will carry out the work on a door that has already been removed from its hinges, puttied and carefully sanded, and laid horizontally.

Step 1. Paint the door white. Apply the paint with a wide brush with stiff bristles in one direction, in a thin layer.

Step 2. When the paint has dried, carefully sand it with coarse sandpaper, achieving an “antique” effect.

Step 3. We begin decorating the panels or the central part of the door. We tear music books and old newspapers into small pieces with our hands. Draw a rectangular or square activity field on the door with a pencil. Lubricate the outlined areas with PVA glue. Immediately lay out the paper chaotically, smoothing it with your hands. Apply clear varnish in two layers on top.

Step 4. Along the perimeter of the areas covered with paper, we attach a black baguette with mounting glue.

Additionally, you can decorate with a beautiful wreath, a large lace bow or plastic beads imitating pearls (adhesive-based).

There are many other ways to decorate doors. Use the materials available in your home arsenal, use your imagination and create your own masterpieces.

Prices for entrance doors

Entrance doors

Video - A variety of ideas for decorating doors

Video - Applying patina to the door

Video - Decorating the door yourself

Every owner of an apartment or private house dreams of decorating it in a stylish and original way. After all, the interior of a home speaks about the taste and life position of its owner. Unfortunately, most typical buildings are characterized by cramped rooms, so when decorating such rooms, the main goal should be to expand the space. Interior doors visually compress the size of the premises and also create a dead zone, which is not always functional. An excellent solution for small apartments is to design a doorway without using a door. How to beautifully fit such a passage into the interior with your own hands - read on.

If you want to increase the space of two adjacent rooms or just want to play up the layout of your home in an interesting way, then one of the best options for you would be to create an open doorway between the rooms. This modern design will fit well into absolutely any interior and will be a great find for small apartments.

This method should not be used to decorate the doorway leading from the bedroom to common room since this part of the apartment requires privacy. However, an arch that serves as a passage from the living room to the kitchen will add a special charm to your home.

Of course, an interior portal will not be able to 100% delimit adjacent rooms, but it is ideal for zoning space. This finish has a lot of advantages, thanks to which it can successfully replace a doorway with a door.

Advantages of open interior passages:

This technique will allow you to combine two rooms with different functions into one. It would be especially appropriate to decorate the entrance to the living room, library or kitchen with an arch.
With the help of open doorways you can make the interior with the most unusual design. Huge number finishing materials for such structures and different variations forms will help bring any fantasy to life.
Open interior passages do not require maintenance, while door hinges require constant lubrication.
Improve the arch without door design much cheaper than installing modern door with an attractive appearance.
Sheathing an interior portal is quite simple. Unlike installing a door, even a person who has no experience in finishing work can cope with such work.

Such input structures have only two drawbacks: the impossibility of complete privacy, and a decrease in sound and odor insulation properties. In relation to a fairly voluminous list of advantages, these disadvantages do not seem critical, however, they negate the possibility of installing open portals in bathrooms and bedrooms.

Options for finishing a wide doorway

One of the main advantages of finishing interior passages without using a door is the possibility of using the most different materials. Thanks to the variety of design options for such portals, they can fit into almost any interior.

The best options for finishing interior portals:

A wide doorway can be lined with plastic panels. This type of finishing materials is quite cheap, but looks attractive. PVC panels that have a visual resemblance to wood are especially popular. This imitation is practically indistinguishable from natural materials in appearance, so it will be an excellent addition to interiors in a classic style. Modern designs can be decorated with an interior passage finished with a bright plastic frame.
Polyurethane stucco molding is an excellent frame for luxurious classic interiors. However, do not rush to decorate the portals between two small rooms in this way, since this type of decoration tends to hide the free space. Polyurethane stucco molding is very similar in appearance to its gypsum counterpart, but its weight is significantly lower, and the cost is not so high. Another advantage of this material is the ability to paint a doorway decorated with it in absolutely any color.
Artificial stone, despite its high cost, remains one of the most popular options for designing a doorless interior passage. The manufacturing technology of such materials suggests the possibility of obtaining absolutely any color. Decorative stone decorate the perimeter of the arch, but it is possible to cover a large part of the wall around the entrance element.
Clinker is a tile that imitates brickwork. This material can be seen on the facade of a building, but it is also suitable for decorating a doorway. Just like artificial stone, clinker is placed around the interior portal. To make this design look more interesting, the edges of the material are not cut at the same level, but are left in natural form. Especially harmonious artificial brick fits into the loft style.

There are other options for finishing doorways without doors, but the ones we have given are considered the most successful. Having a well-developed imagination and basic knowledge in the field of finishing work, you will be able to decorate the interior portal in a more original way.

If you want to improve the doorway by spending a minimum of money, use regular laminate to finish it.

It is not necessary to use expensive materials to decorate the arch. More appropriate for modern interiors regular painting doorway.

Form of finishing a doorway without a door

The doorway differs not only in the finishing method; this element of the room’s interior can be given absolutely any shape. This way you can subtly emphasize the design style of the premises.

What forms of doorways without doors are:

The rectangular passage is the most simple option interior portal. This type of opening is the easiest to work with.
The arched passage looks original and stylish. It will perfectly complement both classic and modern interiors.
Asymmetrical arches are the most unusual way doorway design. Such passages are not located exactly, but diagonally. Asymmetry looks best in newfangled, unusual interiors.

These design options for doorways look equally good in different interiors. Before deciding on the shape of the interior portal, think carefully about whether you can bring your idea to life.

How to make a doorway without a door with your own hands

Anyone can make an open passage between rooms with their own hands. The main thing is not to overestimate your capabilities and choose portal options that you can create.

So, converting an interior doorway into a simple rectangular opening without doors does not require special skills or special documents. These works only involve dismantling the door frame and decorative finishing of the resulting portal.

If you want to give the interior passage a different shape or even expand it, then you will have more worries. First of all, you will need to obtain permission from housing authorities. Then dismantle old finishing and get rid of unnecessary parts of the wall. After the dismantling work is completed, you can move on to strengthening and leveling the resulting opening, as well as giving it the desired shape.

If you live in a multi-story building, then in order to dismantle part of the wall, you will have to obtain permission from the utility services. Otherwise, you may get into trouble with the law.

Finishing doorways decorative materials- This is a fairly simple stage. You can choose any option you like and use it according to your idea.

Original doorway without a door (video)

Doorways without doors are not new, but sufficient original way design of interior passages. You can use it in absolutely any interior style. Trust your taste, don't be afraid non-standard solutions, and your interior will delight you with its individuality!

A doorway without a door is sometimes an original way out when solving the problem of combining living space. For example, not all homeowners want to install a door between the hallway and the living room, especially if the layout of the apartment allows for it. Quite often practiced, combining a loggia with a room is also done by removing the window and door frame, which expands usable area. However, both of the solutions posed above as examples at the same time create a new problem - the original and neat design of the resulting opening.

Today the construction market offers a very wide range of various materials, allowing you to decorate your living space in any style and to suit every taste. Therefore, there should be no problems in implementing even the most intricate project. Moreover, you can get by with relatively low costs, and at the same time richly decorate the doorway with a beautiful and original platband.

There is no need to think that the design of this interior element is not as significant as, for example, the walls or ceiling. Until the latest ones are installed decorative details, the general appearance of the premises will not have the required completeness.

Modern designers have developed a large number of design options for doorways, which are made using different materials. These include the following:

Decorative clinker tiles.
Stucco molding made of gypsum, or its imitation made of polyurethane.
Plastic panels.
Artificial stone.
Natural wood.

In addition to the finishing material itself, the chosen shape of the doorway itself can become a decorative detail of the interior. And it can vary from traditional rectangular options to asymmetrical complex configurations.

Finishing with any of the above materials can be done independently, having previously developed a design sketch and having on hand necessary tools and materials.

Clinker tiles

One of the traditional solutions for finishing an opening is cladding with clinker tiles to look like brick.

Finishing doorways with clinker tiles has recently become a fairly popular trend - this can be explained by the variety of colors of this material and the ease of its use. Not only straight versions of tiles are produced, but also corner ones, which are convenient for lining the corners of doorways, and they are suitable for both traditional rectangular shapes and for arches or semi-arches.

Most often used for external facade finishing, but for certain rooms and doorways it will be perfect, especially if it harmonizes with the decoration of the walls. Sometimes, in addition, in combination with the doorway, the areas around the windows are also covered with the same material, thanks to which the room immediately acquires its own style.

Sometimes clinker tiles are used in combination with smoothly plastered walls.

Markings are made on the walls according to the drawn up sketch. This process is especially important if the tiles are laid out in a chaotic asymmetrical pattern.

The tiles are laid in different ways, creating a smooth edge or a jagged, stepped edge; they are often installed offset.

Before laying the tiles, it is recommended to additionally treat the area on the wall to be tiled, which will improve the adhesion of building compounds and guarantee that the material will be securely glued to the surface. The primer must be completely dry before gluing the tiles.

Clinker tiles are glued to tile adhesive or “liquid” nails - the adhesive composition is selected depending on the quality of the wall surface. If the wall has flaws or small irregularities, then it is best to use tile adhesive. “Liquid” nails can only be used on a perfectly flat surface.

The glue is applied very carefully to the back surface of the tile. If a mortar based on cement or gypsum base, then its excess must be removed immediately, and it is better to try so that it does not protrude beyond the boundaries of the tile.

It is very important to ensure that the tiles are laid exactly horizontally. This parameter must be monitored using a building level constantly during facing work.

When the glue has set, these calibration strips can be removed from the seams and the masonry can be left until the mortar has completely dried.

After the glue has dried, the seams between the tiles are sealed with grout. suitable color harmonizing with the finishing material or the shade of the walls.

Artificial stone

Finishing with artificial stone is also quite stylish option, especially since the choice of this material is even much wider than that of clinker tiles. It is made from natural rocks, crushed into crumbs, to which various polymers and dyes are added.

Artificial material very reliably imitates the appearance and texture of natural stone - it can be limestone, malachite, shell rock, jasper, marble and other rocks. There is an option that is simply called “wild stone”, that is, without processing, which looks very original.

The colors of this material are varied, from cold gray to warm ocher, so it can always be matched to the shades of the interior.

The advantages of finishing surfaces with artificial stone include the following qualities:

Presentable, aesthetic and stylish appearance.
Excellent harmony with other materials.
Resistance to mechanical damage when laid correctly.
Long service life without changing appearance.
Simplicity in daily care of finishing.

To decorate a doorway, they usually select compact sizes of artificial stone, with a not very deep relief pattern, otherwise it will look too bulky.

For corners, it is best to choose special corner elements that are easy to install and securely fasten to surfaces.

Finishing with this material is carried out in different ways - sometimes it is laid, maintaining an even border, but more often the “torn edge” design technique is used. Using this masonry method, the finish is more natural, original and does not look “boring”.

Of course, when choosing one of the options for placing tiles on the wall and in the opening, you need to rely on the general design style of the entire room.

The artificial stone is fixed in the same way as clinker tiles, on one of tile adhesives or "liquid nails". It is necessary to take into account that this material is much heavier than tiles, since it is often thicker, so the wall for its installation must be especially carefully prepared, be sure to treat it in several layers with a primer.

Cladding with artificial stone is quite labor-intensive work, since each of the elements must be glued to the wall and held for some time so that the composition sets. In addition, it must be said that this is a rather expensive material. However, it is worth it - the effect of a high-quality finish will be amazing.

Stucco molding, natural gypsum and artificial

Stucco molding around the perimeter of the opening without a door - columns with pilasters and capitals.

Nowadays, stucco inside modern apartments and houses can be seen quite rarely, although this is one of the most interesting design styles, including doorways. Naturally, stucco molding is not suitable for every interior - it must be designed in a certain style, and all elements in it must be harmoniously combined with each other.

However, if it is decided to design one of the rooms in a classical, Doric, Venetian or other similar style, where the presence of stucco elements is expected and would not be absurd, then decorating the doorway with it will certainly be “in keeping with the theme.”

Previously, gypsum was used to decorate rooms and facades, and columns were often made of natural limestone. Today, these interior parts are also made from polyurethane.

Plaster stucco elements are quite heavy, so they are quite difficult to attach to the walls. Installation is also complicated by the fact that gypsum in its hardened form is very fragile, and if it falls even from a small height or with careless actions during cladding, the finishing element can break into pieces.

Gypsum stucco is, of course, a “classic of the genre”, but working with it is quite difficult

Polyurethane is very light, adheres well and adheres to any surface.

It is much more convenient to carry out finishing - use polyurethane parts “under stucco molding”

A very wide range of different parts are produced for decorating a doorway - these can be borders, pilasters with capitals, or even full-fledged columns that are glued to the ceiling and wall.

The range of polyurethane parts with imitation stucco molding is very wide

The variety of shapes and relief patterns of these decorative elements allows you to choose them to suit any, most demanding taste. It is also very important that polyurethane can be easily painted, which can create an imitation of natural stone or make the surface of parts glossy and perfectly white.

Similar polymer parts are also produced for modern design- with a relief that does not have floral patterns, elements of columns and capitals, but is made in the form of moldings. Although they can also be combined with modest trims that will complement arched or straight elements.

This version of polyurethane finishing can be disguised as natural wood or stone by painting it with the desired color and varnishing it.

Installation of polyurethane parts can be easily carried out independently using one of the polymer adhesives, “liquid nails” or special “Moment” glue.

It’s probably worth noting that columns and pilasters are not particularly suitable for small-sized apartments, since such details will overload the space and make it seem even smaller.

If your house or apartment has high ceilings that make the rooms uncomfortable, you should round off the sharp corners of the doorway and choose an arched option for this.

In the case when a hall or hall in a large house is decorated with polyurethane parts, it is best to use columns decorated with Doric reliefs to create pomp and grandeur.

Plastic panels

Plastic kits for decorating doorways can even be purchased ready-made - they are produced for openings different forms: rectangular, arched and semi-arched, designed for different heights and width. Platbands can be white or made with a textured pattern of one of the wood species that may have different shades. Selecting the color of the platband to match the overall scheme of the interior will not be difficult, as well as installing them on the walls of the doorway.

Typically a finishing kit consists of the following elements:

Platband, which is fixed on the outside of the opening to the wall. As a rule, this element consists of three parts - top bar and two side ones. If the opening is made in the form of an arch, then the upper part should be arched. If an opening is being finished that will be used without a door leaf, then the kit should include two trims, for one and the other side of the doorway.
An additional strip that is mounted directly on the walls of the opening along its thickness and covers it completely.

For an arched opening, it must also be made in a certain configuration. Some kits are made from fairly flexible plastic, so they bend perfectly to the desired shape. However, when purchasing such a kit, it is worth asking the seller to demonstrate the flexibility of the material right in the store.

Decorating doorways with just such a plastic kit is very popular, since it has a relatively affordable price and has a number of positive characteristics, which include:

Ease of installation of elements, which will not be difficult to do yourself.
Sufficient resistance to mechanical stress with careful use.
Easy to care for, as the material does not accumulate dust and can be easily cleaned with a damp soft cloth.
Possibility to disguise communication cables under panels. Some kits have a special entrance for them into the internal space of the platband, located at the level of the baseboard, and the design provides special channels for laying wires.
Plastic panels give the doorway neatness and visually highlight it with an aesthetic frame.

The elements of plastic platbands and extensions are attached to the walls in different ways - this can be by gluing them to surfaces using “liquid nails”, and sometimes they are attached with locking joints to special guides that are included in the finishing kit.

Wood finish

Wooden trims are traditional for finishing door and window openings, but not many people know that they can have a variety of shapes and designs. Of course, having decorative elements carved by hand or on special equipment, will not be cheap, but they will also be used for a very long time.

If necessary, wooden frames you can repaint, for example, if the entire interior of the room changes, including the color of the walls.

Wooden finishing materials can be selected to suit any design style - they can look very simple or be decorated with figured carvings. An important advantage The material itself and products made from it can be called environmentally friendly.

In addition, it should be noted that even the most inexpensive wood, but well processed and coated with the necessary means to preserve the material, as well as decorated with paints and varnishes, will be impossible to distinguish from expensive wood. Carrying out these processes is not at all difficult, so you can save on them by purchasing or ordering the frames in an unprocessed form to the master.

Despite the emergence of a large number of new types of materials from which platbands are made, wood will never lose its popularity and is often chosen to design doorways of any shape.

Doorway shape

Since the shape of the doorway plays an important role in interior design, especially if it is not planned to install a door on it, this parameter should be considered separately. The configuration of the doorway may be familiar to many - rectangular, emphasizing classic style– arched, asymmetrical, trapezoidal and other shapes.

Arched doorway

The arched configuration has recently become especially popular when constructing a doorway without a door. This form has become widespread for the design of passages, both in standard apartments, and in large private houses.

The advantage of this shape is that it softens sharp corners. Visually, the arch makes the ceiling higher in an apartment, and “lowers” it somewhat when the ceilings in mansions are too high. If you need to visually “lower” the ceiling, making the room more comfortable, you only need to slightly widen the arched opening, making it almost completely semicircular, without vertical sections.

In addition, such an arch will expand the space, and both rooms united by it will look much larger.

An arched opening is usually installed between the living room and the kitchen or hallway. This solution makes the design original and the interior more interesting. Each apartment owner, performing installation independently, gets the opportunity to make it exclusive.

This type of opening is also ideal for combining a loggia with a living space. Thanks to the expansion arched design the room will visually appear larger than it actually is.

Try making an arch yourself!

In skillful hands, drywall turns into a truly universal material, opening up the broadest possibilities for independently creating the most complex interior elements. For a diligent and careful apartment owner, manufacturing should not be particularly difficult. To help him, there is a special publication on our portal.

Video: a variety of interior solutions with an arched opening without a door

Trapezoidal opening

A doorway of this shape cannot be called popular, and it is quite rare to find it, especially in a city apartment. It must be said that such a frame, especially if it has a dark shade, has a somewhat depressing effect on the psyche. It may be more rational to use such a form in large rooms, where it will not become the compositional center of the design, but will neatly fit into it along with other decorative elements.

The appropriateness of a trapezoidal opening in a residential area is highly questionable

If, nevertheless, it is decided to use this form to design an opening in an apartment where the ceiling is not very high, then you should not make the upper horizontal part of the trapezoid too narrow. Such a shape will not only visually narrow the room and lower the ceiling - it will, as it were, weigh down the interior and, oddly enough, spoil the mood.

Such “hard” forms can negatively affect a person’s psycho-emotional state

Lack of smooth forms in doorway will make the room uncomfortable, even if wallpaper or other decorative finishing warm shades. Therefore, if you choose the shape of a doorway without a door, then it is better to immediately abandon this option.

Asymmetrical opening shapes

There are a great many options for asymmetrical openings - they can have smooth, angular shapes or combine several of the configurations. When choosing fancy lines for an opening, you need to remember not only about the supporting structures of the house - it is not always possible to widen the opening to the expected width.

Asymmetrical openings - the widest field for the owners’ fantasies

A very important point is psychological impact forms on the mood of residents. If you don’t want constant clashes, irritability and misunderstandings in the family, it is best to avoid sharp corners and sharp shapes of doorways. If you still cannot do without such outlines, then they need to be smoothed out by placing smooth rounded transitions and shapes nearby.

Due to the fact that today in the construction markets you can find not only ready-made arched or asymmetrical kits for decorating openings, but also a lot of other materials, designers and amateur finishers are creating the most unrealistic decorative configurations. One of the materials most often used for such work is drywall. It is used for cladding structures made from galvanized metal profiles. These building materials They have a very affordable price, but to make complex, decorative interior transitions, you will have to put in all your efforts and spend a lot of time, as well as seriously work on the project first, adapting it for a specific doorway.

Drywall – unique material for the construction of walls and partitions

When planning a redevelopment, erecting new partitions or reconstructing existing ones, it is best to rely on the use of plasterboard. A special publication on our portal is dedicated to the process of self-creation of internal ones.

To summarize, it should be noted that the above presented options for designing doorways without installing door leaves are by no means the only ones possible. It is quite possible to independently develop and implement your own design project for this interior element. In this case, it is necessary to take into account the structural structure of the entire structure, since an expanded doorway in some cases can weaken the load-bearing walls and ceiling, which is extremely dangerous not only for residents of the upper floors, but also for those who live in a reconstructed apartment.

If any doubts arise when drawing up a project, then it is best to contact specialists to make calculations or even complete all the work. They will determine the capabilities of load-bearing structures and calculate the permissible limits for the expansion of doorways without compromising general design the entire building.