How and with what to cover the walls in the bathroom - a guide to action. How to decorate the walls in the bathroom (42 photos): classic and modern materials What to stick on the walls in the bathroom

Contemplating finishing bathroom, most often tile comes to mind as the main material, which is quite understandable - it has proven itself excellent, has become widespread as one of the most suitable for specific conditions and durable finishing materials. Yes, and it’s beautiful, no one argues.
However, bathroom finishing materials are not limited to tiles alone; today’s market offers a lot alternative options, from affordable to exotic. We invite you to take a broader look at the finishing of surfaces in the bathroom, at least within tens available materials . So let's begin.

1. Painting

This is an affordable, fairly reliable finishing method with good artistic capabilities. Latex paint perfectly tolerates dampness and moisture, and therefore can be recommended for use in bathrooms. Before you buy paint, decide what kind color scheme you would like to see every day: plain painting is not the most successful design option, but color combinations and zoning are what you need. You can even draw pictures, it all depends on the skill of the performer. The cost of finishing, in the end, greatly depends on the cost of the purchased paint.

2. Self-adhesive film

PVC film – cheap material, which, however, can replace painting. Various options self-adhesive colors and textures will allow you to realize many design ideas, and the surface is resistant to moisture. But there is a big “but”: the preparation of surfaces for film must be of especially high quality, otherwise swelling and peeling cannot be avoided. And still, over time it lags behind in places...

3. Wallpaper

It is logical, following self-adhesive film, to remember wallpaper. It is clear that the option with paper wallpaper should be discarded immediately, all eyes are on vinyl and acrylic ones, which have some moisture resistance, especially those marked in the form of a washing brush or three waves. But even in this case, accept that over time you will have to renovate the bathroom again, change the wallpaper that has peeled off at the joints and is swollen in places.

4. Glass wallpaper

If you really want wallpaper in the bathroom, then you should choose from glass wallpaper, which is much more expensive than the above, but is the only one that is truly suitable for the operating conditions in the bathroom. Made from glass fibers, they are absolutely environmentally friendly, moisture- and fire-resistant, resistant to fungus, and will reliably serve their 30-year warranty. In addition, they are quite beautiful, offer a wide variety of patterns and textures, are friendly to painting and a variety of decorative methods.

Important:

- use special glue;
- distinguish between facial (external) and inner side(in rolls, the outer side “looks” inward and in some cases is marked with a colored stripe);
- understand that fears about the harmfulness of glass wallpaper are absolutely and completely unfounded.

5. Drywall

Of course, only moisture-resistant types drywall are suitable for our purposes. Among the advantages - inexpensive, practical material, easy to install, bonus in the form of improved sound insulation. Disadvantages - requires painting or covering with film, somewhat reduces the volume of the bathroom, which can often be critical.

6. Plastic panels

In a nutshell – “cheap and cheerful”. Easy to install, moisture resistant and you can choose the right one external design. They are good because they can brighten up moderate unevenness in walls. However, for the sake of objectivity, let us remember the shortcomings plastic panels: fragile, lose appearance(turn yellow), collect moisture between back side and the wall, it is difficult to achieve a chic look in the bathroom: simplicity and accessibility, widespread use in public places can give the room a somewhat “cheap” look.

7. Tree

Well, we got to the tree. Well, it’s a good solution: the texture revealed by special processing gives the atmosphere solidity and chic, you can vary color shades, goes well with metal elements decor (gilded mirror frame, bronze taps and handles, etc.). However: expensive, requires competent preparation (impregnation, finishing), limits design options.

8. Stone (natural or artificial)

Well, let’s say it’s not for everyone: the appearance often has a depressing effect on perception due to the weight of the material and the texture of the stone, the coldness of marble and the dullness of granite (the mausoleum is somewhat reminiscent of...), a “pomposity” that is not entirely appropriate for modern housing. Although, again, not for everyone. In addition, stone is expensive and technologically complex, requiring very good specialist. Yes, and it greatly reduces the perception of space.

9. Decorative plaster

Well suited for the bathroom, a special material for covering walls. Species decorative plaster today there are a great variety, not every taste, with its own advantages. If you do everything correctly (if not you yourself, then a specialist who understands this), you will receive great result. Moreover, for a reasonable price.

Our day begins with the bathroom and ends with it. Therefore, it occupies an important part of our life.

In this article you will learn which materials are best to use for finishing the floor, ceiling and walls of the bathroom.

Floor finishing

We all know well that the bathroom is a place where there is a lot of water. Splashes of water, dust and dirt end up on the floor, and we have to protect it well from this.

But how? This problem can be solved with the right flooring.

Often, ceramic tiles are chosen for the bathroom, which are easy to clean, but will be a little slippery when water gets in. Along with tiles, porcelain tiles and mosaics are good finishing floor materials.

A more budget-friendly option is linoleum, but when water gets in it becomes less slippery than tiles. In addition, water can accumulate between the seams, which will lead to early deterioration of the material.

The next finishing material is natural stone. If we compare it with linoleum, we would like to note that the stone is much more expensive, but, of course, better quality.

Another reason why the stone is not popular is that it becomes very slippery when exposed to water, which is dangerous for human life.

Self-leveling floor is a polymer mass that must be applied to a primer. After hardening you will get a beautiful flooring, which is also waterproof and non-slippery.

But the only drawback is the high cost of the material, so self-leveling flooring is not very popular among buyers.

Paul from natural wood. It would not hurt to specify the type of wood when purchasing. After all, there are not so many moisture-resistant ones - teak, larch, puinkado, beech.

But whatever you choose, be sure to treat the material with moisture-resistant products for strength and durability. Yacht varnish also does a good job of this.

Bathroom wall decoration

There are many materials for decorating bathroom walls. Let's look at them all in more detail.

Tiles and porcelain stoneware, these two materials are somewhat similar to each other. They both repel water and do their job well. They differ from each other only in price and quality.

Finished with plastic panels, but when choosing them, you need to be very careful, as there are many fakes. They consist in the fact that they do not have a special coating between the seams that would protect them from water ingress.

But fakes can be immediately noticed, since they should be visible.

The bathroom can also be decorated with acrylic waterproof paints. You can choose any color that suits your room interior.

But, before you start work, do not forget to properly level the walls so that no defects are visible.

The walls in the bathroom can also be decorated with wallpaper. But which ones?

First of all, these are simple waterproof wallpapers that are made of durable material.

Vinyl wallpaper is an expensive option, but reliable.

Photos are wallpaper, but they, of course, must also be moisture resistant. Otherwise, they will last you no more than a month.

At this time, the most popular wallpaper is glass wallpaper. They will certainly be moisture-resistant and water-repellent.

You can choose the color and design of such wallpaper yourself or order it. Washable wallpaper for the bathroom is an ideal option.

Don’t pay attention to the cheapest options, because their material is simple paper, which will get wet and tear after a few days.

Ceiling finishing

The ceiling in the bathroom is also very important. We are accustomed to the fact that it is often light-colored and painted with waterproof paint. But now you can see many other interesting options:

A suspended ceiling is an excellent option, since all electrical wiring or defects in the rough ceiling can be hidden between the ceilings.

Tension is the most practical, but at the same time the most expensive.

Reliable and durable - ceiling with vinyl covering, it can even protect against water leakage from the top floor if you live in an apartment.

When approaching a bathroom renovation, not everyone believes that the only option for finishing the floors and walls is tiles. There are several alternative options that, among other things, can save money and also reduce time for finishing work.

Wall decoration

Dye

An option that does not require any materials at all is paint. Manufacturers offer a lot of options for moisture-resistant paints that are suitable for the bathroom.

The advantages of this solution are quite significant:

You can choose almost any color or several at once;
Paints differ in texture, can be glossy or matte, you can create different effects;
This method does not require high qualifications - anyone can paint walls with a brush or roller;
It's pretty budget option– depending on the size of the room and the paint you choose, you can spend a modest amount of money.
Painting does not take much time - most likely, the work will be completed in one day.

However, if you decide to paint the walls, and not only in the bathroom, then preparing the surface – the walls – will require significant time, money and effort.

To remove the walls for painting, you need to clean them of the old coating, remove old plaster, especially in those places where it “sits” loosely and re-align the walls. There is another option to “sew up” the walls with plasterboard. The final result is coated with primer twice, after which it can be painted.

Plastic panels

Another option for the bathroom is plastic panels. They are resistant to moisture, create a smooth surface even on an imperfect wall, and have huge amount color solutions. As a rule, one PVC panel several times larger than a square of tiles, which means installation will be faster.

Plastic panels are attached either to liquid nails, directly to the wall. Note that if there is an old tile in the bathroom that has lost its attractiveness, but still holds up well and is made to last, then the panels can be glued directly on top of it. Another mounting option is on the frame. If the walls are not level enough, but the frame is made of aluminum profile, protruding a couple of centimeters, will correct the picture, and mounting it on the panel frame is easy and simple.

Moisture-resistant wallpaper

The next option is moisture-resistant wallpaper. They are produced by many brands that produce “clothes for the walls.” However, it is better to use wallpaper in bathrooms, the area of which allows you to “unfold”. So, beautiful wallpaper can decorate those areas that are not directly exposed to water. The walls adjacent to the sink and bathtub should still be finished with something more resistant to moisture.

Despite the fact that the wallpaper is labeled “suitable for the bathroom,” it is based on paper, albeit impregnated with special substances. Therefore, you should not count on long-term use of wallpaper in the bathroom - over time they may peel off.

Decorative plaster

A decorative plaster finish would look appropriate in a bathroom., if this material is protected with moisture-resistant varnish. There are a lot of options for such decor on the building materials market: different in texture and color, such plasters can act “solo” or become a partner for any type of finishing described above.

Floor finishing

Linoleum

The main thing is to choose linoleum of the appropriate class - in this case you need a coating of class 21-23, suitable for residential premises. Next, you need to consider the properties of linoleum.

The following requirements are put forward for the bathroom:

Low slip coefficient to avoid injury wet floor;
The ability to create airtight joints by welding or gluing;
Minimum porosity of the base so that it does not absorb moisture;
High moisture resistance and wear resistance of the top layer.

Laying linoleum implies that there will be no furniture or bathtub in the room, otherwise the material will have to be cut and “adjusted” to fit the legs and other protrusions. If it is possible to lay linoleum in one piece, then the work will not take much time - the material must be given time to rest and straighten, then it is fixed with baseboards.

Moisture-resistant laminate

Another option for bathroom flooring is moisture-resistant laminate. Unlike the usual one, it perfectly retains moisture on the surface and does not deform, and its layers are firmly pressed together, which prevents delamination when water gets in.

The installation of such a coating has its own nuances, first of all, this is the choice of a special sealing adhesive that will protect the joints of the laminate.

Another important point is the choice of substrate, which must also meet the requirements of moisture resistance. Otherwise, installing laminate flooring in a bathroom is no different from the usual process in any other room.

August 26, 2016
Specialization: master in construction plasterboard structures, finishing works and laying floor coverings. Installation of door and window units, finishing of facades, installation of electrical, plumbing and heating - I can give detailed advice on all types of work.

From my own experience, I know that those who decide to do a budget bathroom renovation often spend even more than those who don’t particularly bother with saving. This is due to a number of factors: from the use of low-quality materials to the hiring of unskilled workers. I will share my experience in carrying out work and tell you how to meet the deadline. minimum budget and get excellent results.

Workflow Description

In order to have a good understanding of all aspects of this topic, I will explain in specific example. So we have:

typical room in a nine-story building of the P-44 series;
The size of the room is 1.7 by 1.7 meters, the ceiling height is 2.64 meters.

We will look at how much the finishing will cost us; I will not touch on the plumbing, since most often if the repair is done as economically as possible, then these elements do not change.

Stage No. 1 – competent organization of the process

If you want to save on repairs, then these rules should become fundamental for you:

Do it yourself	If we consider the cost of specialist services, we will notice a peculiarity: their work costs about the same as the materials. And taking into account the fact that we will use the most budget-friendly solutions, it is easy to guess that you will pay more for the services of builders than for materials. The conclusion is simple: we do everything ourselves and reduce the cost of the project by more than half
Use quality materials	I talk about how to make repairs using inexpensive, but not low-quality materials. In pursuit of savings, many begin to go too far and buy the cheapest versions of products, but this is not worth doing, since their reliability and appearance leave much to be desired. I'll tell you how to choose good solutions and still pay a little
Follow the work technology	Below I will tell you how to finish each of the sections; the process is described step by step, and there is not a single unnecessary step in it. There is no need to skip individual stages, as this will inevitably reduce the quality of the work and negatively affect the final result.
Don't remodel	If you want, among other things, to change the layout, then hope for the most cheap repairs It's stupid to say the least. Any manipulations with rearranging plumbing lead to the need to rearrange communications, and here there is no point in saving, everything must be done expensively and reliably

Another very important recommendation, which directly affects the cost of the project - the use of those materials that are easy to work with and that you can lay or attach with high quality. Many times I have completed repairs for those who overestimated their strength and, having completed a small part of the repair, realized that they would not be able to handle it. Then, of course, you need to spend a lot of money on paying the builder.

Be prepared for the fact that you will have to spend a lot of time and instead of cozy, quiet evenings watching TV, you will have to demolish, level, lay, saw, fasten, and so on. There is no free cheese in mousetraps; you will have to pay for the savings with your time, but if you take all the tips from this article, the costs will be minimal.

You must have a work plan in advance in order to make economical repairs from scratch with your own hands; you need to clearly plan each step and accurately calculate the materials so as not to purchase too much. Just read all the sections below and you can easily create a clear plan based on them.

Stage No. 2 – purchasing everything you need

I will tell you how to prepare a simple estimate for a bathroom renovation - the sample can be adapted to your space in order to carry out all the calculations. An estimate is a list necessary materials indicating their quantity and cost, since we carry out the work ourselves, there is no point in including their cost, unless you assign yourself a financial incentive for a successfully completed project.

Cost calculations are made for individual parts of the room; we will look at each of them and start with the floor. Linoleum will be laid on the floor, let’s figure out how to choose it:

Since the room is damp, you should purchase options without a base or based on PVC, since it is not afraid of dampness and mold and mildew do not form in it.
The dimensions of the bathroom are 1.7x1.7, the area is 2.89 square meters, but no one will cut the material to our sizes; it is sold in linear meters. In our case optimal width 2 meters, since it will produce the least amount of waste, we need 2 linear meters, that is, 4 squares;

After calling all the retail outlets, I found a PVC-based option that cost 224 rubles per square meter. Upon inspection, I was convinced that the surface was durable without damage or defects, the substrate was elastic, and the material... As a result, I paid 896 rubles for 4 squares;
To keep the joints of the floor and walls neat, you need a plinth; I found plastic “Comfort” for 56 rubles per piece, 2.5 meters long. We need to close 3 walls, and on the fourth there is a door 60 cm wide with 8 cm strips, that is, the opening takes up 76 cm. The opening is not located in the corner, so on one side we need 20 cm of plinth, and on the other 76 cm, that’s enough for us waste from elements that will go on the walls;

As a result, you need to purchase 3 plinth strips for 56 rubles each, 4 internal corners for 35 rubles each and two plugs - right and left for connecting to door frame, they cost 27 rubles. Adding up all the results, we get (56x3)+(35x4)+(27x2)=362 rubles;

To fasten the baseboard we will use liquid nails; I bought a convenient 200 ml tube for 104 rubles.

Now let’s sum up all the expenses: I spent 896+362+104=1362 rubles on finishing materials for the floor; if we compare it with regular projects, the amount is several times less.

We will level the ceiling with putty and paint it with moisture-resistant paint. white, so we will need the following materials:

To level the surface, I use Vetonit VH, which is intended for use in damp rooms and guarantees a reliable result. The ceiling did not have significant unevenness, so one bag of the composition weighing 20 kg, which costs 456 rubles, is enough;

For painting we will need paint for wet rooms; I chose the latex-based option. The composition needs to be applied in 2-3 layers, so I bought a 3 kg package, for which I paid 190 rubles;

To treat the surface and strengthen it, a primer is needed, I purchased Tikkurila products in a volume of 900 ml for 124 rubles, this is quite enough for our purposes.

Now let’s sum up all the costs: 456+190+124=770 rubles we need for the ceiling.

Let's move on to the most expensive part - the walls, for which I chose PVC panels 250 mm wide and 2.7 meters long - there will be a minimum of waste. This material is not afraid of moisture, it is easy to wash, so it is perfect for the bath.

Let's figure out what we need for work:

You need to calculate the number of panels; if their width is 250 mm, you need to divide the length of the walls by this figure. But we must not forget that on one of the surfaces there is an opening measuring 700x2100, on one side there will be one entire panel, on the other three, and above the doors we will need three pieces 540 mm long, that is, we will cut one element. This means that we need 4 whole panels for the wall with the door, remember this number and move on;
We divide the length of the wall of 170 cm by 25 cm, we get 7 panels, we multiply this result by 3 and we get 21 pieces. We add 4 panels from the point described above and we get 25 elements - this is how much is needed to decorate the walls in the bathroom. I found products for 127 rubles apiece, the final costs were 3175 rubles;
For installation we will need components, first of all this internal corner, these elements are sold in pieces of 3 meters and cost 50 rubles. We need 4 pieces, that is, the cost will be 200 rubles;
On top, bottom and along the perimeter of the opening, I decided to put a starting profile, which is sold in pieces of 3 meters, 4 elements are needed on top, 2 elements are needed to frame the doorway, pieces can be joined at the bottom, since this part will be covered with a plinth, but you will still need 1 a whole piece. A total of 7 starting strips are needed, the cost at a price of 45 rubles will be 315 rubles;
We will attach the panels to a block measuring 25x50 mm; it will be positioned horizontally in increments of 30 cm so that the surface is strong and does not sag. With a height of 264 cm, you need to fix 9 rows, we calculate in linear meters 9x1.7 = 15.3 meters, multiply by 3 whole walls and get approximately 46 meters;

On the wall with the door there will be less material, 3 pieces 170 cm long, 6 pieces 80 cm long and 6 pieces approximately 20 cm long. In addition, you need to nail vertical strips along the opening, 2 pieces 210 cm long to frame it securely. As a result, we get the following result (170x3)+(80x6)+(20x6)+(210x2)= 1530 cm or the same 15.3 meters;
Summing up all the numbers, we get 61.3 meters, the bar is sold in pieces of 3 meters, that is, we will need 21 pieces. Our lumber of this type costs 40 rubles per piece, that is, I spent 840 rubles for the entire volume;
I will fasten all the elements using a stapler, I will need staples, a package of 1000 pieces costs 45 rubles, and this is quite enough to get the job done.

The block will be secured with dowels quick installation 6x50, about 200 of them will be used for all walls, at a price of 25 rubles, the total cost is 500 rubles.

Let's calculate all expenses: 3175+200+315+840+45+500=5075 rubles.

For clarity, I will show all the results in a summary table:

Bathroom floor
Name of material	Quantity	Amount, rubles
Linoleum	4 sq.m.	896
Skirting 2.7 meters	3 pcs.	168
Internal corner	4 pcs.	140
Plug left and right	2 pcs.	54
Liquid nails	200 ml.	104
Ceiling
Putty "Vetonit VH"	20 kg	456
Latex paint	3 kg	190
Strengthening soil	900 gr.	124
Walls
PVC panels 2500x250 mm	25 pcs.	3175
PVC inner corner	4 pcs.	200
Starting bar	7 pcs.	315
Edged block 25x50x3000 mm	21 pcs.	840
Staples for stapler pack. 100 pcs.	1 pack	45
Quick installation dowel 6x50	200 pcs	500
TOTAL:		7207

As you can see, cheap DIY bathroom renovations are not science fiction or fairy tales, and I did not use the cheapest compositions and materials; everything I purchased is different good quality and attractive appearance.

Stage No. 3 - dismantling old coatings

It is impossible to carry out work without removing the old tiles or removing the worn floor covering. Of course, if your floor or ceiling is in good condition, then it makes sense to leave them. For example, if the tiles on the floor look fine, you can refresh the surface by removing the old grout and filling the joints with a new compound. The same applies to the ceiling: if it is smooth, then you can remove the old coating and repaint it.

But in practice, most often it turns out this way, then you need to do both the floor, the walls, and the ceiling, so I will consider just this option; before making repairs on a budget, you will have to work hard to remove the remnants of the old coatings.

The following works are to be done:

Most often on the ceiling old whitewash or paint that has turned black over time. Sometimes there are many layers on the surface, and it takes a lot of time to remove them. I use a scraper, but you can use a spatula, knife and any other device convenient for you, the main thing is that you can remove the old coating;

Old whitewash and water-based paint They will come off much easier if the surface is thoroughly moistened and left for 20-30 minutes.

As for the walls, they can either have many layers of paint and whitewash, or old tiles. The compounds are cleaned off as described above, but you will have to tinker with the tiles; for this work it is best to use a hammer drill with a special spatula. If there are no power tools, then you will have to work the old fashioned way - with a hammer and chisel, the work is tedious, but one way or another it needs to be done;

IN last resort the floor surface is being prepared, in my case there was linoleum there, so the work was simple: I removed the old coating and got a flat surface, completely ready for work. If you have old tiles, then you will have to tinker with removing it from the surface; the same tools are used for the work as in the paragraph above.

Naturally, you need to remove everything unnecessary from the room; you should only have prepared walls left.

Stage No. 4 – finishing the ceiling

It is from this part of the bathroom that I recommend starting work for the simple reason that a lot of dust will be generated in the process, and the putty may fall down. The finishing option I am considering is the most budget-friendly - you can achieve it yourself excellent result for the simple reason that the ceiling area is small and perfectly leveling it will not be difficult even with a lack of experience.

The instructions for carrying out the work look like this:

First you need to check the plane with a level or a level bar to see what irregularities need to be eliminated;
The surface must be treated with a primer to strengthen it and remove dust; the composition is applied with a brush and dries for about an hour;
Then the composition is prepared, it retains plasticity for a couple of hours, so I advise you to do no more than 5 liters at a time, your work speed will be low, so you are unlikely to use more. All the features of mixing the composition are indicated on the packaging, so there should be no problems with this part of the work;

With the first layer you need to eliminate all significant unevenness; if there are none, then simply putty over the entire surface, creating a kind of base; don’t worry about stains, they will be eliminated. After the surface has dried, the sagging can be easily cut off with a spatula, after which you need to check it with a level again;
The second layer should level the ceiling, try to do the work carefully, there may be sagging on the surface, but there should be no holes left, since they cannot be eliminated. As a last resort, you can walk a third time if the ceiling was uneven and you have to create a plane with large differences;

After drying, the dirtiest part lies ahead - grouting the surface; bring a respirator and goggles, as when sanding, dust will fly into the eyes and enter the respiratory tract. To control the plane, use simple trick: hold a light bulb near the surface, it perfectly shows all the unevenness and allows you to perfectly level the surface at one time;
After finishing the work, the surface is cleaned with a brush or broom, after which it can be painted. The work is carried out in 2-3 layers, you can use either a brush or a roller, it all depends on your convenience. Each subsequent layer is applied after completely dry previous one.

Stage No. 5 - flooring

When considering the question of how to make a floor economically, linoleum will always be unrivaled not only due to its low price, but also to the reliability and durability of the coating. In the bathroom this coating is installed very simply:

The surface is cleaned of dust and debris; it can be wiped with a damp cloth to clean it as best as possible;
Next, the material is spread out; it will extend onto the walls, so you need to position it evenly, after which the excess is cut off with a construction knife or any other sharp knife. Do this carefully, since it is unlikely that you will be able to glue back something that has been cut off by mistake;

We don’t have any joints, which simplifies the process, the only thing is that doorway You may need to fix the material; for this you can buy a metal threshold.

Due to the fact that the area of the room is small, plus there will be a bathtub on the surface, there is no need to glue linoleum, but if you want to strengthen the coating, you can use double sided tape. The plinth will be fixed subsequently, on this this stage can be considered completed.

Stage No. 6 – wall decoration

First, a process diagram is presented, and below each stage is described in detail:

The frame is leveled; when attaching the elements, you can put wood chips and pieces of wood under them to derive an ideal plane. A hole is drilled in the block, then a hole in the wall is drilled directly through it and a quick-installation dowel is driven in. You can fill your hand in literally 10 minutes, so the process will go quickly;

Then the corners are attached in the corners, and the starting profile is attached above and below, as well as around the perimeter of the opening.. The main thing is to accurately cut the strip at the joints so that everything looks neat. Fastening is done using a stapler, it is very fast and very reliable;
A panel is inserted into the upper and lower guides and inserted into the corner, after which it is fixed with brackets to the bars. The work is carried out until the entire wall is finished, the last plank is cut so that it is 3-4 mm wider, the corner or starting profile is slightly bent and the element falls into place. The plastic bends well, but you still shouldn’t be too zealous, do everything carefully.

After finishing the walls you can glue plastic skirting board, do not forget to put corners and plugs so that all elements fit perfectly together.

This is a simple example of how to do a cheap bathroom renovation, even if you spend 1-2 thousand more, but still the costs are not comparable to those that you would incur using standard materials and hiring builders.

Conclusion

It is quite possible to transform a bathroom while spending a little more than 7 thousand, and I showed this with a specific example. I tried to talk about everything in detail so that you can understand the topic, and the video in this article will clearly show some important points, so that you can better understand some of the nuances. If you have any questions, write them in the comments below.

Bathroom renovation is an important undertaking that requires a thoughtful approach. Keep in mind that the materials used for finishing must not only be attractive, but also resistant to moisture, steam and temperature changes.
Let's take a closer look at how the walls in the bathroom are decorated.

To choose an acceptable finishing alternative for the bathroom, you should first select the parameters that the materials must meet:

resistance to constant temperature changes and high humidity;
ease of care;
environmental cleanliness and hygiene.

Taking into account the above parameters, you can think about the simpler way to decorate a bathroom.
A cozy bathroom has a special energy. It can be considered not only as a place for hygiene procedures, but also landscaped area for relaxation.
A huge variety of types of finishing materials makes it possible to implement any design solutions . The question of what is the best way to decorate a bathroom needs to be approached with extreme caution.
The bathroom is not easy temperature conditions And high level humidity, that’s why all finishing materials must have aesthetic and practical characteristics:

match the style of the room,
be regular in care,
hygienic,
safe,
resistant to moisture and influence chemicals contained in detergents.

Ceramic tiles

One of the most common materials for finishing bathrooms is ceramic tiles, which will probably never go out of style. This facing material has excellent moisture resistance, is easy to clean and is harmoniously suitable for standard apartments with standard bathrooms small sizes.
The variety of shapes, colors and textures of this material can satisfy the preferences of even the most demanding consumers. This tile goes well with metal, artificial and natural stone, glass and mirror surfaces.
Its significant disadvantages include fragility and difficult installation.

DIY installation features:

Preparation of the adhesive composition.
Apply the adhesive composition with a notched trowel to the bottom surface of the tile, then apply it to the plane of the wall. Then gently press the tile against the wall and make sure that the adhesive is distributed evenly over the entire surface.
Place the slats on the floor and level them so that all rows are even. Lay tiles on the wall.
To begin, lay out the first row above the floor, then the next and continue in the same order for all walls.
The recommended seam thickness is 2-4 millimeters. If you do not make a gap, there is a risk that the tile will peel off or crack due to thermal expansion.
If a whole number of tiles cannot fit in one row, then a tile cutter or grinder is suitable for cutting.

Tip: Glue must be applied to the entire back side of the tile, which is tapped during installation. wooden hammer or the handle of a trowel until it reaches the level of the cord.

Porcelain tiles

How to decorate a bathroom other than tiles? Of course, porcelain stoneware.
This relatively new finishing material, made from pressed and fired powder, has many valuable characteristics and properties.
Its important advantage:

Strength,
Ability to withstand high pressure.
The moisture absorption coefficient of porcelain stoneware is only 0.05%.
Easy installation.
No cracks or voids.
It can easily withstand exposure to aggressive environments.
The material is wear-resistant.
Maintains a representative appearance even under heavy loads.

The use of porcelain stoneware makes the appearance of the bathroom and toilet more luxurious and beautiful. But the most important thing in acquiring the desired appearance is absolute compliance with your interior and taste preferences.
But in general, porcelain stoneware, due to its external similarity with natural stone, helps to achieve an impressive, sophisticated result at minimal cost.

Advice. To decorate bathroom walls, it is recommended to use matte, glazed or polished porcelain stoneware.

At the same time, the glazed type of tiles is ideal for decoration on walls and furniture. Only this tile is capable of providing a very deep color combined with a shiny surface.
And the variety of patterns of this material will help you achieve an extremely unique finish.
Porcelain tiles began to be used for finishing relatively recently, but they have successfully established themselves as high-quality and reliable material. His important advantage- a method of obtaining a specific color during production.
Unlike ordinary ceramic tiles, porcelain tiles are painted not just on the top layer, but on the entire tile, throughout its entire thickness.

Tip: Do not use porcelain tiles if the bathroom already has ceramic tiles, as the difference in texture will be too noticeable.

Plastic panels

If you are afraid of the price of today's building materials, then plastic panels are one of the most inexpensive and simple finishing materials. They may be various widths, with a seam and seamless, with a matte and glossy surface, can also replace others building materials: stone, brick, wood, etc.
Plastic panels – original way make the bathroom secure and attractive. Panels are available in single color and multi-colored.
They are easy to install, easy to maintain, do not require perfectly smooth walls, and will hide sewer pipes, and access to them will be provided at any time needed. The disadvantage is condensation accumulating on the surface of the panels, as well as the easy possibility of damage to integrity.
Plastic panels are an excellent answer to the question of what, other than tiles, can be used to decorate a bathroom.
Installation features:

First determine the direction of installation of the panels, then fix them to the wall wooden slats 30 cm apart, they should be perpendicular to the direction of the panels.
Installation of panels begins with the installation of framing profiles, accessories, internal and external corners.
To attach hanging objects to the wall, you need to install an auxiliary lathing in the places where they are fixed, since the panel can support a weight of no more than 1 kg.
The panels are cut more easily with a saw with fine, frequent teeth.
You should not install plastic panels at temperatures below 0° C.

Tip: Even if the height is the same, you should not cut more than 1-2 products at once to the desired size. Even a few millimeters of discrepancy in one corner can later develop into several centimeters in the opposite.

Self-adhesive film

Self-adhesive film is a real lifesaver for today's repairs. It is widely used in finishing cottages and apartments. Its advantages include health safety, durability, strength and moisture resistance.
This film can also withstand temperatures up to 80 degrees, so it can be placed even near gas stoves and electrical appliances. There are two types of film - standard and special.
Usually it is glossy or matte, with an imitation image on it natural stone. You can see what the film looks like in the bathroom in the photo.

Application process:

First, prepare the surface where you will glue the film. It is necessary to degrease the wall and remove all dirt.
If the wall is uneven, it is better to use putty and then sand the surface.
Cut the film to the required size with allowances and begin gluing.

Tip: If the film sticks very quickly, it is worth covering the wall with powder or talcum powder, so that you will be able to correct the pattern. If bubbles appear, carefully pierce with a needle and release the air.

Wallpaper as an option

If you're still wondering how best to decorate your bathroom walls, consider wallpaper.
Many people prefer wallpaper because of its low cost. As you know, optimists find a positive in everything.
There is an advantage here too. You can add new wallpaper every year to your liking, changing the look of your favorite bathroom.
But this will not work with tiles; they will hang on you until they completely fall off.
So:

So what wallpaper should you stick on the walls in the bathroom? You can choose from washable, super washable, vinyl and silkscreen.
Give preference to wallpaper that has a brush on the label. This picture means that this wallpaper can be washed.
Wallpaper in the bathroom must be glued with a special glue. This glue can easily withstand high humidity rooms.
Wallpaper joints are glued especially carefully. The joints can be additionally lubricated wallpaper glue with the addition of PVA.
Conventional ones are completely unsuitable for the bathroom. paper wallpaper, since at the first increase in humidity, this wallpaper will swell and pull away from the wall. Wallpaper made from woven fabric is not suitable.
They also cannot tolerate indoor humidity levels.

Tip: Pay attention to wallpaper with a special impregnation agent or with water-repellent properties.

Using waterproof paint

Thanks to modern colors You can get a bathroom that is either bright or dark. Such walls will look stylish, and using different flowers one shade, you can get interesting iridescent shapes.
Some prefer to use newfangled materials and technologies, while others carry out painting in a proven way the old fashioned way. Each of the methods has the right to be used, but with any method it is necessary to take into account the high humidity in the room, depending on which you should choose paint.

It is important to understand that the bathroom is created not just for bathing purposes, but also to recharge with energy before a hard day, as well as to relax and unwind in solitude in the evening.
To work you will need the following tools:

curved brush,
masking tape,
sealant gun,
knife,
extension cord with rollers.

Painting instructions:

The first coat of paint is applied in the corners and along the length of the baseboard using a curved brush. This will make the roller easier to use.
Each wall must be painted at one time so that the paint does not have time to dry. Paint around sockets and switches with a brush.
After this, go over these places again with a small roller.
Once the paint has dried, apply another coat of paint as you did the first time.
Be sure to remove the masking tape before the paint dries.

Tip: To paint the walls, choose better paint latex-based, moisture-resistant. It is easier to care for such surfaces, but you need to be careful in the painting process itself - the surfaces must be completely smooth, otherwise the smallest flaws will be noticeable.

If you are still tormented by the question of what you can use to decorate the walls in the bathroom, you should sit down, think and carefully weigh all the pros and cons of all finishing materials.
The bathroom is a specific and rather complex part when renovating an apartment. This room has a peculiar climate.
Ordinary building materials and wallpaper are not always suitable for him. But modern technologies greatly facilitate renovation work, because the list of bathroom products is regularly updated.
Each material has its own characteristics. Before making a final decision on the choice of material, watch the video and study as many samples as possible.