Peeling of film on kitchen facades. PVC film peels off from MDF kitchen facades! What to do? Rules for the operation of facades with PVC film

Lost my former attractiveness appearance, then it's time to update it. If purchase new kitchen is not suitable for everyone, then replacing the film on the facades will be the best option for each owner. The use of vinyl film is the most budget option, which allows you to return the original look to the kitchen facade or completely change it. You can replace the film yourself, but it is better to entrust this task to a professional, because very often in the process there can be difficulties that simply cannot be dealt with without special skills.

The main advantage of vinyl film is that it can perfectly imitate natural wood, stone, leather and others natural materials. Just a couple of rolls of this film is enough and the kitchen will completely change its appearance. Such a replacement of film on facades will not break your pocket, so it is affordable option for every homeowner.

Regardless of whether the work will be carried out independently or this task will be entrusted to a professional, in any case the following list of materials will be required:

• Vinyl film;
• Thick fabric for smoothing the film over the surface of the facade. Also plastic will do spatula;
• Alcohol or solvent;
• Roulette;
• Stationery knife;
• Ruler and pencil.

In order for the film replacement to bring the desired effect, the facade must first be removed and placed on a hard surface. It is not recommended to carry out work suspended, as it is terribly inconvenient and there is a high risk of ruining both expectations and the vinyl film itself. In order to complete the task in accordance with all the rules, you need to know well the main stages of the procedure:

• The door is removed and all existing fittings are unscrewed. If the fittings, frankly speaking, are outdated or worn out, then it is better to replace them with new ones. Thus, it will truly be renewed beyond recognition;
• Before gluing the film to the facade, it is necessary to thoroughly treat its surface with water and soda. Afterwards everything needs to be wiped dry. This procedure is required to degrease the surface;
• Cutting the vinyl film itself is very simple. Regardless of the manufacturer, back side The film is offered with markings in centimeters. Simply measure the cabinet and cut out pieces of film of the required size;
• The film is placed face up on the façade. The protective paper is peeled off from the top of the film, and the film itself is applied to the facade and leveled using a rubber spatula, soft fabric or just hands. If air bubbles appear that cannot be removed with a spatula, you can pierce them with a pin and straighten the film again;
• If any segment turns out uneven, it is better to immediately remove it and replace it with a new one. If you do not do this right away, the film will become very firmly attached to the facade, and there is nothing you can do except remove it with a utility knife.

The easiest way to work is with a single-color film; you need to make sure that it does not cover the grooves of wood or marble, depending on what material the facade is made of.

If the updated facade does not look very impressive, then it can be diluted vinyl stickers or patterned inserts. It all depends only on personal imagination and the materials used.

Rules for the operation of facades with PVC film

• If it is necessary to replace the film on facades, then it is best to take a closer look at expensive and quality options that can normally withstand high humidity in the kitchen and exposure to high temperatures;
• Various solvents, alkalis and other acids will not have the best effect on the condition of the film;
• You cannot use lighting fixtures that will be installed to the facade with film at a distance of less than 10 centimeters. This is especially true when the lamp uses a conventional incandescent lamp. This will cause the film to begin to fade, wrinkle and burn through;
• Facades with film, which are installed near ovens, must be recessed by 3 or more centimeters relative to a gas or electric stove.

If there are also a few points that are under no circumstances allowed with the use of facades and other furniture that is covered with vinyl film:

• Facades should not be installed next to a source of high heat, or in places where there is a direct hit sun rays. Otherwise, the film may change its color, which will lead not only to the loss of the attractive appearance of the entire product, but also to peeling of the film;
• It has been laboratory proven that it is prohibited to use facades and other furniture with glued vinyl film at temperatures below 20 degrees and above 60 degrees, relative to an air humidity of 80%. Otherwise, significant damage to the material occurs;
• After replacing the film on the facade, you need to wait several hours so that it is well fixed on the surface. After this, the facade can be returned to its place. Otherwise, cracking of the film may occur;
• It is necessary to exclude, as far as possible, moisture from entering the façade. If this happens, try to immediately remove the moisture using a soft cloth.

Facade painting

It is worth noting that it is possible to restore a damaged kitchen facade not only with the help of vinyl film, although its presence will serve as additional protection. A very popular option for updating the kitchen facade is painting it. It is worth noting that painting is useful in cases where the facade has retained normal condition. If there are large cracks or chips, then regular painting you won't get away with it here. To paint the facade, you must perform the following steps:

• The façade is removed;
• All fittings and hinges are unscrewed;
• The surface is well cleaned and degreased;
• The facade is cleaned using abrasive sandpaper;
• The surface of the facade is wiped with solvent;
• The facade is painted directly. It's best to paint first hard to reach places. A thin brush is useful for this. It is most convenient to use a paint roller on a flat surface. The paint must be applied in several layers. It is worth noting that it is best to cover the facade new paint can be done using a car aerosol;
• After finishing painting, you can use a stencil to create interesting patterns, which will only increase the aesthetic component of the updated facade. Afterwards you can return the façade to its place.

Separately, it is worth noting that after the paint has dried, you can stick the already familiar vinyl film onto the facade. You can use either a transparent film or one with an existing tint, which will making the right choice will create very beautiful effect. The film must be applied only after several hours of painting. Before this, the surface of the facade must be thoroughly degreased again so that the film can adhere well to the surface of the facade.

Everything is of course individual, you need to see where and how the film came off.

If it is all over the facade, then most likely it is a factory defect; such a facade must be returned to the seller; you can glue it at home, but it is unlikely that you will be able to completely glue the film.

Before starting work, you need to know that PVC film is glued to the MDF facade under pressure and temperature; you can start with similar methods.

The easiest way (by the way, he helped me, not surprisingly, he glued the facade of the kitchen) is to take a dry rag in your hands and, with progressive movements “back and forth”, begin to rub the peeled place, as if by doing this, you will create both temperature from friction and pressure, temperature will bring the dried glue under the film into working condition.

Work without fanaticism and stop, too much effort is not needed here.

rub and look at the result.

If this method does not help, proceed to plan "B".

We take a hairdryer in our hands, you can use a regular one, but it’s better to use an industrial (construction) one and heat up the place where the film has come off, the glue will “melt” and then, as it were, we “rub” the film into the facade, towards the edges.

The next method is similar, but instead of a hair dryer we use an iron and a cloth, “iron” the surface, activate the glue, then press the film.

If nothing helps, then move on to the last plan “C”.

We buy quick-drying glue, such as "Super-moment"

and apply it both to the facade and to inner side film, then pressing, “rub” the film into the facade.

Something should help, but in general you need to remember that PVC film is afraid of elevated temperatures and if your film has come off on the kitchen facade in the oven area, or gas stove, then you need to think about how to insulate the facade and the slab, the film will come off forever if this is not done.

More questions on your topic:

Leave a comment

Builder's Dictionary:: Repair questions:: Calculators:: Special equipment:: Miscellaneous

2006 - 2017 © user agreement:: contact with the site administration [email protected]

Instructions on how to glue PVC and MDF panels to the wall

PVC panels

One of the popular facing materials For internal use, are MDF and PVC panels. This cladding has an attractive appearance, a wide selection of shapes, textures and shades.

Thanks to the wide range, consumers have the opportunity to choose the most suitable option for cladding walls in an apartment. But in addition to successfully purchasing materials, you need to know how to properly attach the panels to the wall surface.

About the advantages and scope of application

The main difference between PVC and MDF panels is the raw materials. In the first case, plastic is used, in the second, wood fibers are used. Both types of material are durable and practical. Decorative panels are used for cladding walls and ceilings, which makes them attractive. The advantages of both types of cladding are almost identical.

MDF panels

They are as follows:

• Beautiful design.
• Strength.
• Economical.
• Easy to install.
• Ease of transportation.

MDF panels are not suitable for cladding bathrooms, swimming pools and other rooms with high humidity. In such rooms it is recommended to use PVC material. It easily tolerates high humidity and temperature changes. Both options can be used for cladding walls and ceilings in the kitchen, balcony, loggia, hallway, and corridor.

Installation methods

MDF and PVC cladding panels can be attached to walls in two ways:

• On the sheathing using self-tapping screws.
• Directly to the wall using adhesives.

Frame on the wall

The first method involves the initial installation of the frame on the wall. A metal, plastic or wooden profile is selected as a base. The profile is attached to the wall using screws or nails.

In this case, the distance between the slats must be at least 60 cm.

What to do - PVC film peels off from MDF facades?

In places with an increased likelihood of damage, the step between the profiles is reduced to 40 cm. After creating the sheathing, they are attached to the wall decorative panels.

Using adhesives

Panels on the walls

Much simpler and no less practical is the second installation method. You can glue PVC panels to the bathroom wall using liquid nails. A similar method is used when cladding residential premises with decorative MDF panels.

Not only liquid nails can be used as an adhesive. Experts say that Moment construction adhesive gives no worse results in the process of installing decorative wall cladding.

Surface preparation

MDF panels in the interior

Some argue that there is no need to prepare the walls and ceiling before gluing the panels. But if you want to get the job done efficiently, it’s better not to skip the preparation stage. So, before cladding, the old coating should be removed. Clean from dust and fungus. If necessary, repair cracks. After waiting for the putty to dry, we proceed to treating the walls with a primer. What is this for?

Insect pests, fungal spores and large number many years of dust. All this will not allow you to produce quality work. In addition, if the walls are not treated and leveled, the PVC panels will not stick properly. The primer will ensure reliable adhesion of the glue to the existing cleaned surface.

Let's start installation

Installation of MDF panels

To stick plastic panels To the wall it is necessary to apply liquid nails or Moment glue to the back part. At MDF installation The panels use a checkerboard method of applying the adhesive composition. The distance between glue points must be at least 20 mm.

After applying glue over the entire surface of the panel, carefully attach the sheet to the wall. The panel is pressed, tapped and torn off the surface. This is necessary for easy weathering of liquid nails. After 5-7 minutes decorative cladding permanently fixed to the surface. We check the evenness and correctness of fastening using a building level.

Finishing corners and rosettes

PVC panels in the interior

In order to beautifully and efficiently glue the panel in the kitchen to the wall, it is necessary to correctly line the corners and sockets in the process. For decorative finishing corners use a separate element - a plastic corner. It can be purchased at hardware store, matching the color and texture to the main finish. Plastic corners are suitable for both MDF and PVC cladding.

At the time of finishing the wall where the switch and sockets are located, it is necessary to carefully cut a hole in the panel for desired element. Subsequently, the cut areas can also be trimmed plastic corners. Since these elements do not have grooves, installation can be done using silicone. At the very last moment of finishing the walls in the kitchen, the baseboards are glued or drilled.

Details step by step instructions gluing MDF and PVC panels is presented in the video.

In the end

The process of covering walls with plastic or wood panels is not complicated. Before finishing, be sure to clean the walls of the previous coating, remove wallpaper and plaster. If necessary, the surfaces are leveled and primed. Then the decorative panels are attached to the wall using liquid nails or Moment construction adhesive. Simplicity installation work allows any home craftsman to carry out cladding.

Peeling of the PVC film at the edges can occur both immediately after the manufacture of the facades, and during operation under the influence of external factors (temperature, moisture) or time.

Reasons for film peeling and lifting on MDF facades:

1.Lack of glue. When manually applying glue, it is easy to overlook and miss one side of the part, especially if the glue is transparent. To eliminate this drawback, many manufacturers use glue with added dyes.

2. Poor quality glue for PVC film. For example, when using a two-component polyurethane adhesive, the proportion of hardener in the adhesive composition was incorrectly calculated. It is also possible when using expired glue. As a rule, this defect does not appear immediately, but after some time. In this case, the PVC film peels off effortlessly from the facade over the entire surface.

3. The glue did not activate and did not react with the PVC film due to insufficient temperature at the joint. The following factors may have an impact:

· underheating of the PVC film itself;

· fast supply of vacuum;

· too thin adhesive layer;

cold billets MDF facades;

· low air temperature in the room and the press desktop;

· insufficient vacuum during the process of cladding the MDF facade, which did not provide sufficient pressing force of the film to the adhesive layer;

· the glue is not suitable for this press in terms of its technological parameters (the activation temperature is higher than that provided by the technology).

4. Incorrect operating conditions for MDF film facades: location near sources of heat, hot steam and moisture. When purchasing furniture with facades in PVC film, the buyer must carefully read the manufacturer’s recommendations about operating conditions, maximum permissible temperatures, air humidity, resistance to household chemicals etc.

Remedies

If there is no or insufficient glue, use a brush to carefully apply it to the edge of the MDF facade, and then glue it in one of the following ways:

Using silicone membrane

It is necessary, according to all the rules, to lay out the parts of the facades on pads on the work table and cover them with a membrane. Then turn on the vacuum. After the membrane covers the facades, you should check the quality of the covering (no folds, tightness over the entire surface of the film). Next, you need to heat the facades to the activation temperature of the glue. As a rule, the heating temperature under the silicone membrane should be slightly higher than during the conventional cladding process. Attention! For MDF facades with a milled surface, this technique is unacceptable, as it can lead to peeling of the film in the milling cavity.

Using heating devices

This can be an ordinary household electric iron or any other tool heated, for example, using industrial hair dryer. The tool should initially be heated to a temperature at which the film begins to “lead”, but not melt. It is best to first test on film scraps, or invisible areas of facades in PVC film. Then, pressing the tool tightly against the unglued edge of the facade for 1-2 seconds, perform a movement as if pulling and wrapping the film onto the inside of the facade. In this case, the glue at the clamping point should warm up, and the film itself should stretch slightly and protrude above the plane back side details. After all sections of the facade have been glued in this way, the protruding excess film can be cut off with a stationery knife.

Unstretched internal corners frame facades can be glued in the same way using heated metal rod commensurate with the radius of the cutter used when cutting out the frame opening.

Attention! You should not heat the film directly with a hairdryer, as it will begin to shrink and curl. This will only make the situation worse.

Bonding the film by friction

The method is interesting because it does not require any devices or equipment.

PVC film peels off from MDF kitchen facades! What to do?

Through a piece of rag thumb the area of ​​the non-adhesive PVC film is rubbed. In this case, friction creates pressure and temperature sufficient to activate the glue. The disadvantages of this technique include the high probability of exposing the edge of the edge of the MDF facade and damage by friction to the decorative layer of the PVC film itself.

Gluing the film using second glue

When using MDF film facades, the film often peels off near heating devices or sources of hot steam. In such cases, you should not delay eliminating the defect, since over time the film may become so deformed that it will no longer be possible to restore the façade. To glue PVC film You will need quick-drying second glue, such as “SuperMoment” or similar. In this case, the gluing area should be coated so that the glue gets not only inside, but also partially on the film itself and on the exposed areas of the MDF, thus ensuring the strength and protection of the facade from the influence of external factors during further operation.

Re-upholstery of MDF facades

An extreme case is when the PVC film peels off over the entire surface of the MDF facade. Old film is torn off using a hairdryer, after which the facade is thoroughly cleaned of the remnants of low-quality glue. The process, despite its simplicity, is quite labor-intensive and requires a lot of patience, since old glue quickly clogs all used sanding agents. It is even possible to re-mill the MDF facade.

Other articles...

How to choose a good glue for PVC film

When conducting cosmetic repairs can be used different materials. The most popular today is PVC film, as it is convenient, reliable and easy to install. This type of film is made from polyvinyl chloride, which has a high waterproof rating, which is its main advantage. In addition, it is presented in a large assortment: different colors, textures, etc. Therefore, it is perfect for arranging any room.

Choosing adhesive for film

How to glue PVC film: process features

Gluing PVC film is not difficult, but it is important to follow certain rules. Otherwise, bumps and bubbles cannot be avoided. Thus, the surface on which the film is glued will have an unsightly appearance. If you follow the rules, the wall will be attractive for a long time.

To do this work, you can contact specialists. They have all the necessary knowledge, skills and experience in solving such problems. But, as experience shows, this can be done with your own hands. This way you can save money on paying for the work of a master. Moreover, the result will be no worse.

In order to glue the PVC film, it is not required special equipment or tools. It is enough to have a roll of decorative film, putty or other material that will help plaster the walls, water room temperature, detergent, plumb line, scissors, napkin.

How to glue PVC film: stages of work

Pasting a PVC surface involves performing a number of works:

• Preparing the surface on which the film will be glued. On at this stage it is necessary to clean the wall of old wallpaper, paint and other things. Then it is leveled and all irregularities are removed. Various methods can be used for this;
• Degreasing the wall. Will help in this process warm water with detergent;
• Drying work surface. In order for the film to hold tightly and reliably, it must be glued to a completely dry wall;

• Film cutting. To do this you will need sharp scissors. They will allow you to do this accurately and accurately. When measuring the strip, it is necessary to take into account that shrinkage is possible. Therefore, it costs a little more to cut than actual size walls;
• Pasting the film. This is done from top to bottom and using a plumb line. This way the film will stick as evenly as possible;
• Smoothing the film. It is carried out with a sponge or napkin from the center to the edges of the canvas. Moreover this work requires maximum care so as not to damage the material. If it is not done well, there will be tubercles. They indicate that there is air remaining under the film.

The film strips must overlap, as they may separate after gluing. In addition, you should not allow the formation of wrinkles and other things that will spoil the appearance of the canvas.

Adhesive for PVC film: features

Depending on the surface for which the PVC film is used, this type of adhesive is selected. It differs in its composition and characteristics. This will allow it to be fixed firmly and securely.

Thus, adhesive for PVC film for facades must have special adhesion properties. In addition, its composition ensures a fast response and complies with membrane-vacuum pressing technology. At the same time, it allows you to connect different surfaces.

What to do if the PVC film peels off from MDF facades?

They may differ in their chemical and physical characteristics.

As for the use of primers and primers, they are not required. This significantly reduces the costs of the entire process.

Memran-vacuum pressing has a number of features that are important to consider, since its implementation requires compliance with certain temperature conditions. If they are violated, the material will be unevenly distributed on the facade, this will lead to the formation of folds, etc.

Another important requirement for glue concerns its heat-resistant properties. It should not be exposed to high temperatures, which are inevitable during the operation of the film. If this indicator is at a low level, then it will simply begin to peel off or become deformed. This will ruin the look of the wall.

Adhesive for PVC film for MDF facades: types

Adhesive for PVC film for MDF facades can be different types. They differ mainly in their composition. So, there is one- and two-component. The first is used less frequently, since it contains a hardener, which is added when preparing the mixture. It reduces the service life of the prepared solution.

One-component adhesive for PVC furniture film (shown in the photo). It is significantly different from the previous one. Despite the fact that the composition also includes a hardener, it is added during the production of glue. Therefore, it does not affect the shelf life of the prepared solution. Thus, it can be used for a long time. However, its properties remain unchanged.

When using this glue, it is important to consider several parameters. These include the condition of the surface and the degree of humidity in the room. The film is glued in the same way as on other surfaces. Furniture must first be cleaned of dirt and degreased.

PVC Film Adhesive for Pool

Due to its properties, PVC film is widely used. It is especially popular when arranging swimming pools and bathrooms. As you know, these are specific premises. They are quite picky when choosing finishing materials. Because they are dominated by high humidity which can have a detrimental effect on them.

PVC film has a high moisture resistance. Therefore it can be used in swimming pools. At the same time, the glue should have similar properties. This is the only way to get a durable and a reliable wall, covered with PVC film. At the same time, it is used at the stage of processing seams and provides additional sealing. This mixture should dry out when exposed to air, but remain elastic. This glue remains visible on the surface, so it should be matched to the color of the film.

It's no secret that the kitchen is the center of any home. And our task is not only to plan it competently - in order to spend a minimum of effort and time when preparing food - but also to exploit it so that its presentation will please us and our household for many years. Most often, the consumer opts for furniture made of chipboard with MDF facades coated with PVC film. This choice is explained, first of all, by the relatively inexpensive price, as well as the availability wide choice configurations and color range. That is, there is an opportunity to satisfy almost any, even very demanding, taste.

Rules of care

So, your beloved and long-awaited kitchen was delivered and installed, or you, having labored over the project for a long time, assembled it yourself. What should you do or what shouldn’t you do so that in a couple of months you don’t experience disappointment from the purchase? After all, the production technology of such facades, unfortunately, does not have the best effect on their wear resistance: the film may begin to peel off over time, especially around the perimeter. Let us outline a few simple operating rules relating specifically to MDF facades coated with PVC film.

1. You can only wash the kitchen with “soft” ones. detergents. Never use cleaning powders containing abrasives. Various surface sprays (can be used for glass) and a soft sponge or napkin are good for this.
2. Avoid extreme temperature changes. Try to maintain between +10 and +35 degrees. Lower or high temperature may cause the film to peel off. Sooner or later, an open oven, a nearby heated stove, too much ventilation (especially in winter), and heaters will lead to the same result.

Features of operation

Think about it, PVC film sticks at a temperature of 120 - 180 degrees, and if your oven produces at least 60 -100 degrees outside, this already poses a threat to the cabinets located nearby.

Install the thermal insulation strip. It protects the ends of the cabinet from heating by the stove and avoids delamination of the edges. It is installed at the ends of the cabinet. It is very easy to care for: to remove dirt, it is recommended to wipe with a damp cloth, but it is not recommended to use any cleaning agents.

1. Avoid high humidity. If you are still in doubt whether to install a hood or not, then I think your choice is now obvious. Steam from pots and grease from frying pans will also not have the best effect on your furniture.
2. Water is the enemy of any furniture.

   Make sure that it does not get on the facades.

3. Close doors and slide drawers carefully, avoiding sudden movements. Don't expose them mechanical impact(contact with sharp objects, friction, collisions).
4. Close location lighting fixtures can lead to excessive heating of the facade and, as a result, deformation of the film, as well as a change in the color of the facing coating. The lamp and the facade should not be closer to each other than 15 cm.

DIY MDF facade repair

What to do if you notice that the PVC film is peeling off.

Defects of MDF film facades. Peeling off (lifting) the film

First of all, if the kitchen is still under warranty, report this unpleasant incident to the seller. He simply must replace the defective kitchen facades with new ones. Perhaps the defect is associated with the quality of the glue with which the film is glued, or its insufficient quantity. Simply put, the manufacturer saved money on you. However, the seller may also ask how correctly you used the furniture.

If the warranty has already expired, you can try to fix the defect yourself. Fill a medical syringe with PVA glue or “Moment” superglue, you can also use “ liquid nails"and carefully glue it under the film. However, this method can be used if the film has simply peeled off. If it “shrinks,” which most often happens as a result of overheating, then there is little that can be done. Try to disguise with matching putties. But, despite all your efforts to restore furniture in this case, good result I can't guarantee you. The best solution would be to order new facades, but keep in mind that they must either be ordered for the entire kitchen at once, since film facade manufacturers do not guarantee an exact color match of films from different batches; or discover the designer in you and “play” with the colors of the facades. Let's say if your kitchen is light green, then you can order the fronts for the cabinets on which they need to be replaced, yellow.

After the blanks are laid on a membrane-vacuum press and the PVC film is stretched, the most crucial and, perhaps, the most intriguing moment of all comes. technological process production of facades from MDF. However, before you turn on the press, you should study several important indicators.

Characteristics of PVC film for crimping MDF facades.

· PVC film thickness. Varies from 0.2 to 0.55 mm. The maximum possible and minimum required heating temperature of the film surface depends on it.

If overheated, the polyvinyl chloride base will melt, which will lead to the formation of melted holes and a violation of the vacuum seal. On some types of films, due to such “toasting”, glossy spots are formed, which negatively affects the appearance finished product from MDF.

At low heating temperatures, the film will not achieve its elasticity properties necessary for successfully fitting the bends of parts and the reaction of the adhesive.

Repeated heating of the film to the required temperature reduces its quality.

· PVC film color. It also affects temperature indicators during the manufacturing process of MDF facades. Dark shrink films acquire their technological properties at temperatures from 45 to 60 °C. Light and especially glossy films can heat up to 120-135 °C.

· Adhesive for PVC film. Here you should take into account the fact that some adhesive compositions are activated only after reaching a certain temperature.

· Room temperature and temperature of the membrane-vacuum press itself. In the hot season, as a rule, the heating process occurs faster, so you should be careful about overheating the film.

Having studied all of the above factors and made the appropriate conclusions, you can proceed directly to the process of covering MDF facades with PVC film.

Crimping of MDF facades with PVC film.

After turning on the heating, the PVC film in the machine begins to “move.” At this moment, you should be wary of the formation of large folds, which may later remain on the MDF facades. However, if you see a crease at the beginning of the heating stage, do not panic. The fact is that the first sign of “readiness” of the film is its stretching. At a certain temperature, all its folds are aligned, and it is pulled “into a string” above the surface of the press table.

PVC film peels off from MDF facades

At this point you need to run vacuum pump.

The second sign that the vacuum can be turned on is the appearance of a slight haze above the surface of the film. This means that the maximum possible temperature has been reached and it is time to begin the tightening process. At this time, you need to slightly open the vacuum tap and turn off the heating for 2-3 seconds, and then turn it on again. The PVC film will begin to settle on the horizontal surfaces of the MDF facades. In places where the film comes into contact with the surface of the parts, it begins to cool, so there is almost no risk of overheating here.

After the PVC film lies tightly on the surface of the MDF facade parts and begins to bend around them sides, the vacuum taps should be opened a little more.

The formation of a vacuum also has the properties of absorbing heat. Therefore, heating should continue until the PVC facing film covers all the curves of the pattern on the surface of the MDF facade and its side parts, slightly tucked under the lower edge. Then you can turn off the heat, but the vacuum pump must run a little more, in case the press is leaking air somewhere.

It is worth remembering that PVC films have a maximum permissible temperatures heating, exceeding which leads to melting and burnout. You should be wary of bringing the process to such temperatures. In cases where maximum temperature heating has been achieved, but the facades are not fully covered, or folds have appeared somewhere, it is possible to repeat the cladding process again.

To do this, let the machine cool down, open the taps, turn off the vacuum, and reheat the MDF facade backfill. The non-adhesive areas of the film will stretch from the heat, after which it will be possible to turn on the vacuum again and continue the pressing process.

Also, do not forget that glue for PVC film tends to react only at a certain temperature. Therefore, if the film shrinkage was successful, it is not a fact that adhesive composition has been activated, and it is necessary, without turning off the vacuum, to warm up the MDF facades in PVC film to the required temperature within 2-3 minutes.

Most people have a special attitude towards kitchen furniture. If the interior of the living room is easy to update by buying furniture in a different style and color, then a sane person will not change the kitchen set every year. It's too troublesome and expensive. Most often, furniture covered with façade film is installed in the kitchen. This is convenient - you can choose any color or surface imitation you want. The film is a very durable material and is applied in a special way when heated. Sometimes annoying misunderstandings occur, and for some reason the film comes off the surface of the furniture. We will find out further what to do if the film on the kitchen facades comes off.

So, what to do if the film on the kitchen set falls off?

Firstly, don’t panic or get too upset.

Secondly, understand the reasons in order to understand whether restoration of film facades is possible. There may be several reasons:

• — Masters involved in pasting kitchen facades, glue was not applied to the entire surface. The human factor, nothing can be done. It is quite easy to miss some areas, and it is to these areas that the film will not stick.
• — The craftsmen used low-quality glue. It also happens: the glue is applied correctly, but its composition leaves much to be desired. Or it is not mixed well enough if we are talking about two-component polyurethane glue. First you will see bubbles on the film, and then it will completely come off on one side. By the way, the shelf life of the glue also matters. Yes, yes, even in repairs, materials have expiration dates great value. Therefore, you must definitely pay attention to the deadlines so that you don’t have to worry about remodeling the film facades of the kitchen afterwards.
• — The masters did not comply with the required temperature regime. Repair of film facades is usually required if the film was not heated properly or the room was too cool. Another option is that the blanks for the facades themselves were cold.
• — You violated the rules for using façade film. Restoration of film facades may be necessary if the kitchen is too humid, hot or, conversely, cold.

Re-gluing of film facades?

The second important question that the “victims” ask themselves is whether re-gluing the film will help? Most people strongly associate the repair of film kitchen facades with re-gluing the film. If the furniture is under manufacturer's warranty, this option is indeed possible. You contact the seller, he contacts the manufacturer, and the issue is resolved. But what to do if the film falls off from the kitchen facade, and the warranty on the furniture has long expired? Do you really have to buy new furniture? Calm down, the situation is fixable. possible! And repainting film facades will help here.

Here the third important question arises - is it possible to paint kitchen facades yourself? Of course you can. But keep in mind that you will have to carry out serious preliminary work. For example, choose a paint with a suitable coloring composition. It's not as simple as it seems at first glance. There are many paints on the market and not all are suitable for the kitchen. For example, varnish is unstable in conditions of humidity and exposure to aggressive environments (detergents). But auto enamel, on the contrary, loves warmth, is resistant to moisture and generally has little fear of damage.

In order not to bother with the choice of paint, you should turn to professionals. By the way, they will suggest an interesting interior solution, because in the case of painting, you can combine two or more shades. Experts also know exactly what additional materials will be required. It is unlikely that you will find a hair dryer or sander at home. Professionals can carefully remove the remnants of the film that has begun to peel away from the facades. They are also familiar with the nuances of painting facades. For example, here is one of them - facades need to be painted in one direction. There can be even more subtleties if you want to paint the furniture in several different colors.

Let's summarize: what to do if the film falls off from the kitchen facade? There are several options.

Extreme - buy a new headset.

Protracted - do the independent renewal of the film or paint the facades. It could cost millions nerve cells and up to ten thousand hard earned. Will you provide a guarantee for your own “handicraft” and will you be able to redo unsuccessfully completed repairs? As they say, measure seven times and then cut.

The smart option is to have more experience, relax and enjoy your holiday while the professionals work.

It's no secret that the kitchen is the center of any home. And our task is not only to plan it competently - in order to spend a minimum of effort and time when preparing food - but also to exploit it so that its presentation will please us and our household for many years. Most often, the consumer opts for furniture made of chipboard with MDF facades coated with PVC film. This choice is explained, first of all, by the relatively inexpensive price, as well as the availability of a wide selection of configurations and colors. That is, there is an opportunity to satisfy almost any, even very demanding, taste.

Rules of care

So, your beloved and long-awaited kitchen was delivered and installed, or you, having labored over the project for a long time, assembled it yourself. What should you do or what shouldn’t you do so that in a couple of months you don’t experience disappointment from the purchase? After all, the production technology of such facades, unfortunately, does not have the best effect on their wear resistance: the film may begin to peel off over time, especially around the perimeter. Let us outline a few simple operating rules relating specifically to MDF facades coated with PVC film.

1. You can only wash the kitchen with “mild” detergents. Never use cleaning powders containing abrasive substances. Various surface sprays (can be used for glass) and a soft sponge or napkin are good for this.
2. Avoid extreme temperature changes. Try to maintain between +10 and +35 degrees. Lower or higher temperatures may cause the film to peel off. Sooner or later, an open oven, a nearby heated stove, too much ventilation (especially in winter), and heaters will lead to the same result.

Features of operation

Think about it, PVC film sticks at a temperature of 120 - 180 degrees, and if your oven produces at least 60 -100 degrees outside, this already poses a threat to the cabinets located nearby.

Install the thermal insulation strip. It protects the ends of the cabinet from heating by the stove and avoids delamination of the edges. It is installed at the ends of the cabinet. It is very easy to care for: to remove dirt, it is recommended to wipe with a damp cloth, but it is not recommended to use any cleaning agents.

1. Avoid high humidity. If you are still in doubt whether to install a hood or not, then I think your choice is now obvious. Steam from pots and grease from frying pans will also not have the best effect on your furniture.
2. Water is the enemy of any furniture. Make sure that it does not get on the facades.
3. Close doors and slide drawers carefully, avoiding sudden movements. Do not expose them to mechanical stress (contact with sharp objects, friction, impact).
4. The close location of lighting fixtures can lead to excessive heating of the facade and, as a result, deformation of the film, as well as a change in the color of the facing coating. The lamp and the facade should not be closer to each other than 15 cm.

DIY MDF facade repair

What to do if you notice that the PVC film is peeling off. First of all, if the kitchen is still under warranty, report this unpleasant incident to the seller. He simply must replace the defective kitchen facades with new ones. Perhaps the defect is associated with the quality of the glue with which the film is glued, or its insufficient quantity. Simply put, the manufacturer saved money on you. However, the seller may also ask how correctly you used the furniture.

If the warranty has already expired, you can try to fix the defect yourself. Fill a medical syringe with PVA glue or “Moment” type superglue, you can also use “liquid nails” and carefully glue it under the film. However, this method can be used if the film has simply peeled off. If it “shrinks,” which most often happens as a result of overheating, then there is little that can be done. Try to disguise with matching putties. But, despite all your efforts to restore furniture in this case, I cannot guarantee you a good result. The best solution would be to order new facades, but keep in mind that they must either be ordered for the entire kitchen at once, since film facade manufacturers do not guarantee an exact color match of films from different batches; or discover the designer in you and “play” with the colors of the facades. Let's say if your kitchen is light green, then you can order the fronts for the cabinets on which they need to be replaced, yellow.

Allows you to update the interior, make it fresher and visually attractive. Replacement kitchen set can be quite expensive, so you can only update the facade. will help change the appearance of the furniture, while its main parts will remain old, which will allow you to significantly save on replacing cabinets.

Benefits of façade renovation

To restore the facades they used. There are times when it begins to come off: if the MDF film has peeled off in the kitchen, you should not rush to replace it with a new one. The film often peels off due to humidity, temperature changes, steam, and the use of low-quality glue.

You should not be surprised if peeling occurs quite quickly, even during the loading process after manufacturing or when the product has a short lifespan. It comes off for the following reasons:

• The glue is not applied to the entire surface. When the substance is applied manually, often the worker skips sections of the product and the film does not stick to them. You can solve the problem by using colored glue.
• Using a cheap, poor quality substance. Quite often a two-component polyurethane composition is used. Stir it in correct proportion quite difficult, so the glue hardens incorrectly and does not hold well, bubbles may appear on the film.
• Using expired glue. When using such a material, the film will stick, but will peel off fairly quickly.
• Insufficient temperature during gluing, as a result of which the connection did not go well enough. There can be many reasons: poorly heated film, the vacuum was applied too early, the adhesive layer was thin, the workpieces for the facades were cold, it could have been cold in the workroom, the film was not pressed well enough, due to a weak vacuum supply, the wrong adhesive was chosen, the composition of which does not come into contact with a specific film. The facades themselves could also be used incorrectly: for example, they were located next to heating devices, stove, sources of moisture. Before purchasing, it is important to find out how to properly care for furniture and for what conditions it was made.

How to fix the problem?

If the film on the facade of the MDF kitchen has peeled off , from the edge you need to carefully spread it with glue and press down. There is a chance that the film will take the desired shape. Another way to restore the coating is to use an adhesive membrane. To do this, you will need to lay the boards on a dry and flat surface, for example, on a table, cover them with a membrane, and use a vacuum. The membrane should tightly cover the facades. If you want greater reliability, you need to use high-quality glue and heat the material so that it can be activated. Warming up should be done evenly. This method is suitable only for unmilled facades: if the surface is uneven, the membrane will not stick and will quickly peel off. Therefore, it is so important to correctly restore kitchen facades, observing certain conditions.

Using heating devices

If the PVC film peels off from MDF kitchen facades, you can try replacing it with a new film or gluing it in place old material using available electrical appliances. This could be an iron, a powerful home or construction hair dryer. The film needs to be carefully warmed up: it should become quite soft and blurry, but not start to melt. If you have something to try, use these pieces or on an inconspicuous place on the facade. The device is pressed against the edge that is not glued for a few seconds. The film should stretch, the glue should warm up at this moment, and the material should protrude towards the back of the facade and adhere firmly. If this can be done, then it will be possible to glue the entire facade in this way, in places where the film has retreated.

Advice: the film itself cannot be heated with a hairdryer at close range, as this will curl it and be damaged.

Such restoration of kitchen facades with your own hands requires a certain skill, but is quite simple to perform and does not require the use of expensive tools or materials. If the inside and corners are poorly glued, you can use a metal rod comparable in size to the frame. First you need to warm it up. For this, you can use, for example, a gas burner.

Restoring coating using friction

Restoring kitchen facades from MDF using this method does not require any available tools at all. In order to glue the separated section of the film, you need to cover it with a rag and start rubbing it with your fingers, pressing the film. If there is glue under it, friction temperatures will be at small area enough to activate chemical reaction and make the film stick.

Advice: this method should be used carefully, as there is a high risk of damaging the film, exposing its edge or removing the top layer, which will ruin the appearance of the coating.

Application of glue

Restoring a glossy kitchen can cause some difficulties, since gloss does not tolerate strong physical impact, which is why it should not be roughly rubbed with your fingers or heated closely with any appliances. You can try more safe method– gluing the separated film using “Moment”. Most often, such a film peels off in the kitchen, since it is not affected by hot steam. It is necessary to restore the coating as quickly as possible, otherwise it will be damaged. The glue must be applied to the untreated area of ​​the facade and to the film itself along the edge so that it can isolate the seam from negative influences. All this must be done carefully, as the glue easily sticks and gets dirty.

Conclusion: inexpensive do-it-yourself kitchen restoration is quite accessible; it is advisable to look at photos of the finished results in advance. With a careful and competent approach, you can easily restore the appearance of the kitchen without resorting to replacing parts and without spending cash and produce .