What is glass wallpaper for walls? What is glass wallpaper? Types, photos, videos…. Technology for gluing fiberglass wallpaper

Choosing wallpaper for painting requires a careful and responsible approach. Here we must be guided by considerations of expediency. If you don’t want to re-glue the wallpaper often, and you decide to repaint it from time to time, then you need to choose durable and environmentally friendly wallpaper that will be easy to paste.

The most suitable and interesting wall covering in this case would be glass wallpaper.

How are they made?

The basis of the material is a glass thread, which is obtained by melting from soda, dolomite, quartz sand and lime. Made in this way, it acquires very unusual properties - it becomes elastic and at the same time very durable. For this reason, in cases where it is necessary to strengthen the surface, glass wallpaper is often glued to the ceiling.

To make wallpaper, the resulting fiberglass is woven into panels with a variety of three-dimensional patterns - matting, herringbone, diamond, leaves. Then the canvas is impregnated with modified starch.

The glass wallpaper itself can be made single-layer or double-layer. The latter have a paper backing. A standard roll is 1 meter wide and 25 or 50 meters long. Their service life can reach 30 years.

Advantages

There are quite a lot of them to pay close attention to this material:

being made from natural raw materials and containing no toxic components, they are absolutely environmentally friendly;
the material, being fireproof, does not support combustion and does not emit substances harmful to humans in direct contact with fire;
glass wallpaper does not accumulate static electricity and therefore does not attract dust, being a hygienic and hypoallergenic material;
The material is moisture resistant and does not delaminate. Does not swell or peel off when exposed to water;
glass wallpaper, having breathability, allows the walls to “breathe” freely, while preventing the formation of fungus and mold;
the material easily adheres to any surface;
there is the possibility of repeated repainting (up to 15 - 25 times depending on the quality of the wallpaper) without loss appearance.

Upon purchase quality material from well-known manufacturers, you don’t even have to think about the disadvantages of glass wallpaper. But cheap wallpaper can immediately crack when unrolled.

It is also necessary to remember that for repeated repainting it is better to purchase wallpaper with a clearly expressed texture of the pattern, since the implicit one simply disappears after several colorings.

It is important that fiberglass is completely undemanding in terms of surface quality. It perfectly masks small cracks and potholes. Possessing reinforcing properties, the material can be used to strengthen the surfaces of old walls.

How to work with them

The technology for pasting walls with them is simple, but has its own characteristics that you need to know.

It must be remembered that although fiberglass wallpaper appears identical to the outside and inner sides, this is wrong. They have a back and a front side. Usually the rolls are wound with the right side inward. Some manufacturers' wallpapers have back side have a gray or blue stripe.
Fiberglass wallpaper can only be glued specialized glue for heavy wallpaper. Its basis is the same modified starch with which wallpaper is impregnated. The glue is applied directly to the surface to be glued (preferably with a roller). If it is very porous, then the glue can be diluted with water.
Before starting work, the wallpaper is cut into sheets of the required length. Wear gloves and long sleeves when cutting, as fiberglass crumbles when cutting and can cause skin irritation. For perfect alignment of the pattern, it is necessary to make an allowance of 5 - 10 cm.
Compliance is very important temperature regime. You can work with wallpaper in the temperature range from +100 to +250. Straight lines should be avoided sun rays and any drafts.
The surface to be glued must first be primed. You can use a deep primer or a weak solution of glue used for glass wallpaper. The strips are glued end-to-end, matching the pattern to achieve a uniform texture of the pasted surface and tightly fitting the seams.
It is very important to wait until the glue has dried well, and only then can you start painting the wallpaper. Usually time completely dry is about 48 hours.
To paint pasted surfaces, you can use water-dispersion or water-based paint with good wear resistance. Even before painting, you need to prime the surface of the wallpaper with a diluted adhesive solution. This is done because fiberglass absorbs large number paint, so without primer it will be used up much more. Painting is carried out in 2 layers with an interval of at least 12 hours.
If necessary, repaint the walls, new paint applied directly over the old one.

Ceiling pasting

Decorating ceilings with wallpaper is practically not used these days. But if you need to repair old ceilings covered with cracks, it is simply impossible to do without glass wallpaper.

They will not only restore the beauty of the ceilings, but also strengthen the base, preventing old cracks from growing and new ones from forming. It is not for nothing that it is recommended to use glass wallpaper in seismically hazardous areas.

Before gluing glass wallpaper to the ceiling, it must be prepared and primed.

The rules for pasting are the same as for walls:

The wallpaper is applied from the wall with the window. The stripes are located parallel to the window.
The glue is applied directly to the ceiling.
A dry strip of wallpaper is glued to the damp surface of the ceiling and rolled over the entire area of the panel with a clean rubber roller.
The remaining strips are glued end to end. To remove residual glue, wipe the edges of the panels with a clean cloth.
If the joints are not quite neat, they can be puttied to level the surface. Before this, the entire surface is primed with the paint that will be used to paint the ceiling.
After cleaning the putty areas with fine sandpaper, apply finishing layer paints.

Using high-quality glass wallpaper and following the rules for sticking them for many years will save you from the need to replace wallpaper or repair the surfaces of walls and ceilings. For a refreshing renovation, all you need to do is choose paint - and new interior ready!

More and more new models are appearing on the building materials market, characterized by increased strength, lightness and wear resistance. Moreover, this concerns not only the materials used for exterior finishing premises. Over the course of several years, ordinary wallpapers have turned into high-tech models with amazing properties. It is glass wallpaper and their features that will be discussed in this article.

There are a lot of myths about new and unfamiliar material, but most of them are far from reality. Fiberglass wallpaper consists of many thin fibers that intertwine with each other. When magnified many times, the structure of this material resembles a knitted fabric. All thin but elastic fibers made from special glass. There is no point in drawing analogies with glass wool, since the “threads” in such a fabric are much thicker and stronger. Then the prepared “yarn” is processed on special machines, which is how the wallpaper itself is made.

Despite the fact that identical fibers are initially prepared, the result is completely different models wallpaper You can find glass wallpaper with a simple geometric pattern or an exquisite openwork relief.

There are two main types: smooth (“cobweb”) And with raised pattern. For finishing In rooms, only wallpaper with relief is used. The “web” is intended for leveling surfaces. This material has reinforcing properties and helps hide wall imperfections. Paint must be applied on top of it.

Glass wallpaper with relief can also be painted, but this is only a decorative solution. The density and wear resistance of this material are high, so it can be used as an independent finishing coating.

Advantages and disadvantages of glass wallpaper

An unfamiliar material often raises doubts, and the presence of glass in the composition increases anxiety. But the glass wallpaper is completely safe for human health. The thickness of the fiber and its elasticity do not allow the material to crumble and break. Glass microparticles do not fly in the air and, accordingly, do not fall into respiratory system. All components from which glass wallpaper is made are do not cause allergic reactions. These wallpapers are manufactured in factories in Germany; all models undergo quality control and meet safety standards. Moreover, this material can be found in European hospitals and kindergartens, which emphasizes its reliability and compliance with the highest quality standards.

Another advantage of this material that sets it apart from its competitors is increased resistance to high temperatures. This means that glass wallpaper can be used even in the kitchen next to the stove. They are also completely safe during a fire, since they do not burn and do not turn into toxic, caustic smoke.

Behind the glass wallpaper easy to care for, if they become dirty, they must be washed with water or a cleaning agent. This coating is not afraid of moisture, does not swell or lose its shape. Increased wear resistance allows you to enjoy beautiful finish at least 20 years. And with proper care, glass wallpaper can last more than 30 years.

Embossed wallpaper can be painted with acrylic and latex paints to refresh the interior. The manufacturer guarantees up to 20 layers of paint without changing the texture. But for such experiments, we recommend that you purchase exclusively white material.

There are few “disadvantages” of glass wallpaper, but the main one is high cost. New and high quality material has not yet become popular, and its production is a labor-intensive and expensive process. Therefore, the price of glass wallpaper and special glue for them is quite high. Also, pasting walls can cause problems for non-professionals, since the technology is slightly different from the traditional one.

In order for glass wallpaper to look good on the walls, you need to glue it correctly. Even a non-professional can cope with this, but all instructions must be strictly followed.

The wall must be prepared in advance. Clean the surface of old wallpaper, paint and crumbling putty. After this, the walls need to be leveled (if necessary) and well primed.
You need to purchase suitable glue. Usually it is sold immediately with the material, but if it is not included in the kit, then select a high-quality analogue. Glue for paper or even non-woven wallpaper will not work. You need a special composition for very heavy materials, otherwise the wallpaper simply will not stay on the wall or ceiling.
During installation, you will have to cut the sheets, which will lead to the appearance of small glass particles. Therefore, we advise you to choose clothes with long sleeves and wear a mask when working.
It is quite difficult to distinguish the front and back sides, so the manufacturer usually marks the “wrong side” with a gray stripe. Also, the roll is usually rolled with the front side inward.

Otherwise, glass wallpaper does not differ from the traditional one. The canvas is cut into separate parts, which are glued to the walls.

Attention! The glue is applied to the wall, not to the cut.

If you plan to paint the wallpaper, then you can start this stage only two days after finishing the finishing. During this time the glue will have time to dry completely.

How to properly glue glass wallpaper: video

Features of care

A huge advantage of such wallpaper is that removing stains and dirt from them takes just a few minutes. They are resistant even to strong detergents, but there should be no abrasive particles in the composition. Wipe glass wallpaper with a damp cloth soaked in a suitable solution to remove dirt.

Please note that painted wallpaper can be seriously damaged during maintenance. The wear resistance of paint is usually lower than that of wallpaper. Therefore, in this case, you should choose a cleaning agent based on the paint parameters.

Use of new and modern materials immediately gives the interior a special atmosphere. Fiberglass wallpapers differ in their patterns from simple ones. geometric shapes to interesting openwork patterns, so they can suitable for decorating any room. They can be found both in the decoration of bedrooms and in bathrooms. The ability to paint such wallpaper multiple times in any color also allows you to create interesting images and even change the style of the room.

For many people who spend renovation work on their own, wallpaper is a favorite material for finishing walls. Their beauty lies in the fact that the material is affordable, easy to install and is available for sale in a wide range, which is constantly being updated.

IN recent years on store shelves you can see thick white or cream rolls of a not very remarkable appearance at first glance. The label says it's glass wallpaper. It cannot yet be said that there is great demand for them - the consumer has not yet fully appreciated the advantages and capabilities of this material. Therefore, it makes sense to take a closer look at it.

Composition and types

Don't think that there is an inaccuracy in the name of the new wallpaper. Everything is accurate: wallpaper is made from glass threads held together with a stabilizing impregnation.

For the production of threads, exclusively natural components are used:

dolomite;
quartz sand;
lime;
soda.

Therefore, from the point of view of the impact on human health, the material is absolutely safe.

The production process is as follows:

The components are mixed and melted at high temperature.
Then on special equipment Threads of various thicknesses and types are drawn from the melt.
The next step is to make woven fabric from them.
At the final stage, the canvas is impregnated with a fixing composition.

Canvases can be smooth, textured and even embossed.

Most types of glass panels are manufactured by European manufacturers who take the quality of their products seriously.

They can be classified according to a number of characteristics:

by density;
by type;
by color;
according to the pattern of the canvas;
according to the degree of water resistance;
if possible, coloring;
by method of use.

If we talk about density, then wallpapers are divided into 3 categories:

The first grade is high quality wallpaper. The density of the webs is high, the roll packaging is protected on the sides by plugs.
The second grade is lower quality and less dense wallpaper. Usually packed in polyethylene.
Non-standard - the quality of the canvases is noticeably lower, there are defects (threads stick out, the design is knocked down in places).

When choosing wallpaper, pay attention to their density.

If the material is intended for wall finishing, then its minimum density should be at least 100 g/sq. m.

By type, the material can be divided into 2 groups:

Smooth wallpaper (fiberglass, fiberglass) - are thin translucent sheets, somewhat reminiscent of blotter in appearance. The density of such canvases is low, the texture is even. In a professional environment, these canvases are called “cobwebs”. Most often they are used as ceiling wallpaper.
Embossed wallpaper - the structure is dense, a three-dimensional pattern is clearly visible. The fabrics are durable.

Based on color, the material is also divided into 2 types:

White or light beige wallpaper is usually intended for painting.
Colored glass wallpaper is the final layer of wall decoration.

Depending on the pattern of the canvas, there are wallpapers:

textured - usually the texture of the canvas is small, representing a repeating pattern. They are woven on a regular loom;
complex - can have a large three-dimensional pattern. For their production, special jacquard machines are used.

There are 3 types of glass wallpaper with different water resistance:

The rolls are marked in the form of a single wave - this is fragile wallpaper that can be cleaned of dirt only by lightly (without pressure) rubbing with suede.
The two wave marking means that the material is of medium water resistance and can be cleaned with a slightly damp soft cloth.
Three waves mean the wallpaper has high degree waterproof and can be cleaned using detergents. And if the marking also includes a brush, then the wallpaper is considered heavy-duty.

Depending on the possibility of coloring, wallpapers are divided into:

smooth – not intended for painting;
embossed - with the possibility of painting.

If we talk about methods of use, fiberglass can be divided into the following categories:

Fiberglass “for putty” - used to level surfaces with minor defects.
Paintable spider web - can be used for both ceilings and walls. Not suitable for wet rooms - except as a rough finish.
Colored glass wallpaper - used to decorate surfaces without painting.
Paintable wallpaper.
Liquid glass wallpaper made from fiberglass in various colors. Apply similarly to conventional liquid wallpaper. Their main advantage is the absence of seams on the surface being finished. Not recommended for use in rooms with high humidity.

Advantages and disadvantages

If the average Russian consumer has not yet fully appreciated this finishing material, then professional builders and designers give it a high rating.

This is due to the large number of positive properties of this type of wallpaper:

Enough high density material (110-220 g/sq. m), ensuring its durability - on average about 30 years.
High whiteness of wallpaper for painting, allowing you to tint it in any color.
Possibility of repeated repainting of surfaces finished with glass wallpaper (provided they are of high quality).
The wallpaper is safe for health and hypoallergenic, so it can even be used in children's rooms.
The material does not attract dust, does not fade, does not contribute to the formation of colonies of fungus and mold, and allows air to pass through.
Can be used as a reinforcing layer.
The material is fireproof and does not emit harmful substances when heated.
Despite the high cost of high-quality glass wallpaper, the material of the middle price class is quite affordable for all segments of the population.

If you need to remove glass wallpaper from the walls, it will be very difficult to do so.
When using wallpaper of low quality, its texture may become smooth after the first painting.
When cutting wallpaper, there is a high probability that the fiberglass will crumble, so you will have to work in protective clothing, a mask and goggles.
To paint the walls you will need more paint than usual - this is due to the textured surface.
If the work is carried out by hired specialists, then finishing the surfaces will cost more, since it includes two stages - installing wallpaper and painting it.

You need to purchase glass wallpaper in a specialized store, since in unreliable retail outlets there is a high probability of stumbling upon a fake.

Which is fraught with troubles such as:

cracks appear as the wallpaper dries;
peeling of material from the surface;
rupture of panels during installation;
uneven absorption of paint, which leads to the appearance of spots of different color saturation;
loss of appearance after the second painting.

To apply wallpaper you need to use special glue; regular wallpaper glue will not work.

In order for the finished walls to retain their original appearance for a long time, the choice of paint must be taken very seriously.

We must proceed from the following considerations:

type of room where glass wallpaper is glued;
how often will the wallpaper surface be exposed? mechanical stress– touching, friction;
How often will you have to clean the wallpaper from possible dirt?

If we talk about the quality of paint, experts recommend using compositions for water based. They are dispersions of synthetic polymers and are produced in the form of a liquid paste or have a creamy consistency. Immediately before painting the wallpaper, they are diluted with water. When water evaporates, the particles of the binder connect with each other and form a dense protective film on the surface.

Water-based paints are non-flammable, almost odorless, easy to apply to wallpaper, absorb well, and are environmentally friendly.

The compositions used for decorating fiberglass are divided into the following types:

Based on styrene-butadiene dispersion, the paints have high water resistance, but tend to quickly acquire a yellowish tint. Therefore, you should not use them in rooms where there is often sun.
Based on polyvinyl acetate dispersion - a composition with low water resistance. Is the cheapest of all. Used only for dry rooms.
Based on acrylic dispersion – practically universal formulations. They have high water resistance, are not afraid of ultraviolet radiation, have good abrasion resistance, are durable, and dry quickly. Painted surfaces can be washed. But the cost of these paints is the highest.

The painting technology is simple, but requires some skill:

You can paint glass wallpaper only after the glue used during installation has completely dried. Therefore, you need to wait at least a day, and if you can wait, then longer.
Since the wallpaper has a pronounced relief, it is better to use a roller with a fairly long pile or a spray gun. You will also need narrow flat brushes (flat brushes) for painting the corners. It is also advisable to have a foam roller - it is convenient for removing excess paint from the surface of the wallpaper.
The room must be pre-prepared: the floor is covered with film, radiators, cornices and baseboards are closed or sealed with masking tape.
The surface of the wallpaper must be primed with diluted wallpaper glue and dry. This will improve surface adhesion before applying paint.
The painting process itself usually begins from the corners of the room, the upper and lower sections of the walls. They are painted with flute. You should not carry out work around the entire perimeter of the room. It's better to break it up into sections.
After the borders of the area are painted with a brush, you need to treat the rest of the surface with a roller, carefully picking up the already painted stripes. Do not forget to remove excess paint from the relief using a foam roller. During work, it is necessary to observe the “wet edge” principle - the next strip of paint should overlap the previous one while it is still wet. Otherwise, the intersection boundaries will be visible. To avoid defects (the paint is absorbed quickly), you will not have to rest until the entire wall is painted.
After all the walls are painted, you need to leave them to dry for at least 12 hours and then paint them again.

You need to choose a paint composition based on the purpose of the room.

It is better to paint a children's room, hallway and corridor with an acrylic-based composition, since these rooms experience the greatest load.

Acrylic paint can be tinted well and withstands washing well.

The living room can be finished with water-based paint, since the walls here do not experience strong impacts. If the wallpaper has a pronounced relief, then it is better to use latex-based paint.

The kitchen is a place where there is a high probability of walls getting dirty, so you will have to wash and repaint them often. And since each coloring smoothes out the pattern, choose wallpaper with a deep texture. Acrylic paint is also the best option here.

Toilet and bathroom – high humidity and the need to frequently wipe the walls require the use of a waterproof composition. Acrylic would also be ideal. But you can also use styrene-butadiene paint, since it also tolerates moisture well. At the same time, there is no sun in the bathroom, and the lights there only turn on for a short time, so the paint will not have the opportunity to turn yellow. But it is much cheaper than acrylic.

Possibility of use

If you decide to use fiberglass in the interior of your home, you will not go wrong. This material can be used for finishing any premises: living rooms, kitchens, corridors, bathrooms.

Although tiles are considered the best finishing material for a bathroom, glass wallpaper can also be used successfully. The only condition is that the wallpaper, glue and paint must be of high quality. Then they will well tolerate both moisture and temperature changes characteristic of the bathroom microclimate. But there are so many design possibilities! You can choose the color that appeals to you most, and then, if you want, you can easily change it to another. Agree, this number will not work with tiles.

The general rules for using fiberglass wallpaper are the same as for regular ones:

Do not use wallpaper with large textured patterns in small rooms - they will visually make the room smaller.
Paint the walls according to general rules using certain tones for rooms facing different sides of the world.
In low rooms it is better to use wallpaper with a narrow vertical repeating pattern - this will make the ceiling higher.

Use the opportunity to highlight individual zones in the room by painting them in different tones the same color or even contrasting colors. In this regard, the possibilities of glass wallpaper are limited only by your imagination.

Photo gallery

Fiberglass wallpaper has many advantages over other finishing materials. Fiberglass sheets have a natural composition, which means it is safe for all residents of the house. High levels of strength, moisture resistance and fire resistance are ahead of other types of wallpaper coverings. The material is not afraid of sunlight and temperature changes, which allows you to decorate not only an apartment, but also a balcony or loggia, and the possibility of repeated repainting, if desired, can easily change the decor.

What is glass wallpaper?

Fiberglass wallpaper is a finishing material for walls consisting of impregnated fiberglass. The surface has a relief pattern. Fiberglass wallpaper is made from glass blanks that melt under high temperature and the fibers stretch. These are subsequently used to create threads, and then fabric or fiberglass using the weaving method. Later, the surface is coated with impregnation to ensure the stability of the material.

Compound

Fiberglass wallpaper consists of natural materials: soda, clay, limestone, quartz sand. To transform from blanks into fiberglass, only high temperatures are required, reaching 1200 degrees. The basis of the impregnation, which is applied upon completion of the work to ensure the durability of the material, is modified starch.

Specifications

Types of fiberglass wallpaper

By invoice

Fiberglass wallpaper has two main types of texture, smooth and embossed. Wallpaper different types can perform different functions.

Smooth

Smooth fiberglass wallpaper is also called gossamer or fiberglass wallpaper. This is due to visual similarity. In addition to the aesthetic function, smooth glass wallpaper also performs a practical one, namely, it is used to strengthen and level walls or ceilings. Smooth glass wallpaper will good option for finishing the ceiling, the surface is smooth and even.

Embossed

Another name is traditional glass wallpaper. A material with greater density compared to smooth wallpaper. The surface has a clearly defined relief, forming some kind of ornament or design. This type of fiberglass wallpaper will do for final wall finishing.

Gozhka

The type of texture has the name of the fabric, which is distinguished by a unique and recognizable way of weaving threads; visually the surface of the glass wallpaper looks like a sheet of fabric. Weaving can be small, medium and large.

Rhombus

The weaving of the fiberglass fabric forms a diamond-shaped pattern along the entire length of the fabric. The drawing can be with figures of equal or different sizes. Diamonds are also distinguished between large, medium and small. Visually, the wall covering looks like jacquard.

Herringbone

The fiberglass fabric has a zigzag pattern along its entire length. Like other types, the drawing may have different size. Small ornament suitable for decoration small rooms, for example a corridor.

To order

Today, in addition to the usual patterns, glass wallpapers are also made with other patterns; in production, you can also make an individual order for a unique weaving according to an individual sketch.

By quality

The quality of glass wallpaper depends on its density; the higher it is, the stronger the material and longer term services.

By color

For painting

Paintable fiberglass wallpaper is made in a neutral color, most often white or beige. This background allows you to apply any shade to the surface without distorting it.

Colored

Colored fiberglass wallpaper is not intended for painting; paint is added during production. This type of finishing is suitable for a room that does not require regular updating.

The photo shows the dining room in classic style. The finishing is made with glass wallpaper in orange tones.

By water resistance

During production, the degree of water resistance of fiberglass wallpaper is indicated on rolls or packaging. The designation is in the form of waves. How more waves, the higher the water resistance of the material.

1 wave

Fiberglass wallpaper does not have good contact with water. The surface can be washed with a slightly damp soft cloth or suede.

2 waves

They indicate the average degree of moisture resistance of fiberglass fabric; the material tolerates contact with water better. The surface can be washed with a cloth or soft sponge and water or soap solution.

3 waves

The three-wave icon means a high degree of moisture resistance of the glass wallpaper. When cleaning, non-abrasive detergents can be used.

Pros and cons

Like any material, fiberglass wallpaper has a number of advantages and disadvantages over others finishing materials. Taking into account all the nuances, you can easily decide on the relevance of this type of wallpaper for a particular room.

Pros	Cons
High fire-fighting properties	High cost
Consists of environmentally friendly materials, therefore safe for health	Only latex or acrylic paint is suitable for painting.
High strength fiberglass coating, due to which the fabric has reinforcing properties	A special glue is required, the price of which is also higher than other adhesives.
Anti-vandal qualities	Fiberglass wallpaper is difficult to remove, since the impregnation is tightly bonded to the glue.
Long service life	It is mandatory to comply with safety rules when working, namely the presence of a respirator.
Glass wallpaper is resistant to changes in humidity and temperature, as well as sunlight.
Sound insulation increases
The walls are breathing

The photo shows an infographic about the advantages of glass wallpaper

How to properly glue to walls?

Which glue to choose?

For fiberglass wallpaper it is necessary to use special glue, liquids for ordinary paper wallpaper will not fit, they will simply be ineffective, since they will not withstand the weight of the glass wallpaper. Today in construction it is presented large selection glue intended for gluing glass wallpaper from a number of manufacturers, such as Oscar, Quelyd or Kleo. Their composition takes into account the features of fiberglass material; the mixtures can be purchased in ready-made or dry form.

Which surface is best to glue on?

Fiberglass wallpaper must be glued to the prepared surface. To do this you need to remove old finishing and level the walls using putty; minor irregularities do not need to be removed. The walls are sanded and covered with primer. After this, the surface is ready for finishing.

How long does it take to dry?

Fiberglass wallpaper dries in average day - two. In this case, the room temperature should be from 10 to 25 degrees. You also need to exclude the possibility of drafts or bright sunlight.

Preparing the walls

Before you start gluing the fiberglass material, you need to prepare the working surface.

Remove old finish
level the surface using putty,
seal drywall joints or small cracks with paint mesh,
sand,
prime with a roller,
After complete drying, the walls are ready for gluing glass wallpaper.

Gluing technology

Before you start work, you need to apply markings and prepare the glue. The markings will help you stick the wallpaper evenly without overhanging the side. To do this, draw a line perpendicular to the ceiling, which is measured using a plumb line or level. The glue will be ready 15 minutes after mixing.

Video

Features of use on the ceiling

Gluing glass wallpaper is carried out according to the same principle as on walls. Check strength old plaster Self-adhesive tape on the ceiling will help.

The direction starts from the window to the opposite wall.
Glue is used only specifically for glass wallpaper; any other glue will not withstand their weight.
The glue is applied only to the ceiling.
You need to act sequentially, the next strip of glue is spread after the sheet of wallpaper is glued.
The gluing is done end-to-end, with an overlap on the walls.
The excess is cut off after drying.

How to paint correctly?

Which paint should I choose?

For painting fiberglass coverings, water-dispersion paint is best suited. The choice is due to the lack toxic substances, quick drying and lack unpleasant odors. Depending on the type of room, you can choose acrylic, styrene-butadiene or latex-based paint.

Step-by-step painting instructions

Painting glass wallpaper has a simple procedure. However, its strict adherence helps to achieve an ideal result.

Video

How to choose glass wallpaper?

Fiberglass wallpaper must be selected according to certain criteria, namely pattern, manufacturer, class and composition.

The higher the density of the fiberglass material, the stronger the material and the longer the service life,
fiberglass wallpaper of lower density is not so durable, but has a low cost,
the pattern is selected depending on personal preferences, it is also possible to make an individual order for a unique pattern,
the more voluminous the drawing, the more since it can be coated with paint,
the ideal composition is a ratio of 70% glass and 30% impregnation,
The edges of the roll should be smooth and the weaving neat.

Photo ideas in the interior

For the bathroom

Fiberglass wallpaper will be a good finishing option for a bathroom. They are not afraid of moisture and will not allow fungus and mold to appear.

The photo shows a bright bathroom. The finishing is made with glass fabric wallpaper in turquoise color.

For greater strength and reliability, the fiberglass fabric is coated with washable paint.

The photo shows a spacious bathroom decorated with fiberglass wallpaper in blue.

For the kitchen

In the photo modern kitchen finished with glass wallpaper in neutral colors.

In the kitchen, this fact is very relevant. At high temperatures fiberglass sheets do not emit harmful substances. In addition, replacing glass wallpaper will cost less and the work will be easier. Suitable for finishing the dining area.

In the toilet

In the toilet, just like in the bathroom, it is important to minimize the possibility of mold and mildew. Fiberglass wallpaper will help with this, they will be a good alternative tiles. In addition, their cost is lower than tiles.

In the hallway

The strength of the fiberglass material will eliminate mechanical damage to the surface, and the waterproof coating is easy to care for and keep clean.

On the balcony

Fiberglass wallpaper is not afraid of changes in temperature and humidity; it will become a practical solution for finishing glazed balcony or loggias.

The fiberglass material itself is quite durable and can withstand different methods cleaning. The method must be selected depending on the paint covering the surface.

To remove stains from fiberglass surfaces, you can use non-abrasive detergents,
depending on the moisture resistance of the paint, you can use soft suede or a brush,
For preventive maintenance, it is enough to remove dust with a dry soft brush.

Photo gallery

Glass wallpaper is a practical and at the same time beautiful method of interior decoration. The high strength of fiberglass material allows you to decorate any room, and the safety of their composition makes it possible to decorate a children's room or balcony without worrying about the release of harmful substances. At the same time, the material breathes and protects against mold.