Homemade cages for rabbits. Diagrams and tips for building cages for rabbits with your own hands. For adults

Today, rabbit breeding is becoming a fairly popular activity that brings benefits and very good dividends. If you decide to go into this business, the first thing you need is to build cages for rabbits - we will provide drawings with dimensions and video instructions in this article.

Certainly before making a decision build a rabbitry yourself, you have repeatedly viewed photos and videos of ready-made designs and even thought about the option to buy one of them. However, it is not difficult to make rabbit cages with your own hands; you will find drawings for this in this section.

So let's get started.

First of all, it is necessary to choose the material for the construction of the future house. It must be safe for its furry inhabitants, smooth in texture, without foreign objects.
for walls often use boards, thick plywood or mesh.
For frame and support it is preferable to take wooden blocks.
On the floor put a rail or a fine mesh. The roof should be made of board or plywood.
If the rabbitry is placed outdoors, the roof must be covered with any roofing material.

You can see a detailed drawing with the dimensions of a two-section cage in the photo.

This is what it will look like double two-section cage.

Cages for rabbits according to the Zolotukhin method

Unlike classical structures, a rabbit cage built according to the method of N. I. Zolotukhin, it is not required to equip with a mesh floor and a pallet. For such cells, either boards or slate are used. Only the back side of the cage is equipped with a fine mesh, no more than 20 cm wide. This is due to the fact that 95% of rabbits defecate precisely at back side. The feeder in this design is placed directly on the door. Another difference between the cell, built according to the Zolotukhin method, is that it does not provide a place for the mother liquor. His rabbit will choose on her own where she considers it more correct. Perhaps, a video with Nikolai Zolotukhin himself will tell you the best about how to create cages for rabbits with your own hands.

After watching the detailed video instructions, you can correctly build a comfortable cage for your pets. Having such a structure on the farm, you will not encounter the problem of cleaning the cage itself, you also there will be no difficulty to clean the rabbit feeders. And your pets will always be clean, well-groomed and healthy and will love their house very much.

DIY rabbit feeders

Feeder for breeding rabbits - not less than important element the whole cycle. It should be of high quality, affordable for both you and your pets, as well as safe for their life and health.

You can buy a ready-made feeder or make your own. Homemade feeder, by the way, more correct option. After all, it can be made almost free of charge and made in such a size as you need. The main thing is to lay a place for its placement when designing the cage. A do-it-yourself rabbit cage, and even equipped with a feeder, will serve as a great habitat for your pets.

Feeders themselves are divided into three key types:

hay feeders;
flute feeders;
feeders are bunker.

How to make a rabbit feeder: drawings, photo and video instructions

In agriculture, there is another name for the first type of feeders - sennik. This design is very reminiscent of a manger for cattle. Sennik can be equipped both outside and inside the cage.

Making such a hay feeder does not require special skills. and skills. In order to make it with your own hands, you need to draw the markings of the side walls on a sheet of plywood, focusing on the dimensions of the rabbitry door. And then, using a hacksaw, cut out two side walls approximately as shown in the photo.

Do not forget to cut out the grooves on which you will attach the structure to the wall. Using a wooden block, we connect the two parts with self-tapping screws, and front part cut out of tin scissors designed for metal carving, and then fasten. We attach any grate near the grooves (even a part from an old refrigerator will do). It is from it that the rabbits will take hay.

The groove feeder is the simplest type of feeder for rabbits.. It can be made from plywood, tin, and even from plastic bottles. There is nothing complicated in its design, and in order to make such a feeder with your own hands, just look at its image.

You can learn about the advantages, disadvantages and features of making hopper feeders by watching the video.

Many novice farmers are wondering where to start breeding rabbits. This activity will not require any special costs. First of all, it is necessary to equip a place of residence for eared animals, prepare cages, drinkers, feeders. All this can be easily done by hand. The main thing is to choose the appropriate design and size for the cage, prepare drawings, necessary tools and building materials.

First of all, you need to decide on the size. The most common are double designs with two separate sections. There are other types of cages: single-section, group for young rabbits, three sections or for a rabbit with babies. There are also author's designs: from the farmer Zolotukhin, from the breeder Tsvetkov. Based on what will be built, and materials are selected.

First of all, it is necessary to determine the type of cell, and then purchase the material.

Necessary tools for construction:

hacksaw;
a hammer;
corner;
pliers;
plane;
screwdriver.

Any design implies the presence of a frame, walls, floor, ceiling and doors. Most often, wood and metal mesh are used to build cages. Each cell of such a grid should be no more than 2 * 2 cm and at least 16 * 47 mm in diameter (depending on the age and weight of the rabbits).

The minimum set of materials includes:

large sheets of plywood;
slate;
screws and nails;
bars;
slats;
durable galvanized mesh (with small cells).

For the manufacture of doors, curtains and latches, as well as feeders and drinking bowls, are additionally purchased.

The wood must be well sanded and sanded, the ends of the mesh must be securely fastened. Be sure to remove all sharp edges so that the animal does not get hurt. It is better to cover all protruding wooden parts inside the cage with tin. Rabbits love to chew on wood to grind their teeth. Therefore, it is necessary to put branches in the feeder more often. The walls and roof can be made of plywood and mesh, and for the main frame choose thick bars of wood.

Attention. If the cage is located in an open space, on the street, then good roofing materials cannot be dispensed with. But a metal roof is not worth doing. In the summer, in the sun, it will become very hot, which will lead to heat stroke in rabbits.

Most often, rabbit cages are made of wood and mesh.

The frame is made of thick bars, the length of which depends on the location of the cage. If it is installed outdoors, then the length of the legs of the frame should not be less than 80-100 cm. For a cage standing indoors, 35-40 cm of length is enough.

Sizes and types of cells

First of all, you need to find or make yourself, correct drawing. It is important to remember that one cage for breeding rabbits is not enough. You need to build three or four at once.

The average dimensions of a standard cage are:

length 120-140 cm;
width 70-80 cm;
height 40-50 cm.

For young rabbits, a length of about 90 cm is sufficient, and the rest of the parameters may remain the same. For one adult animal, it is customary to allocate at least 0.7 square meters. m. area, for young animals - 0.2 square meters. m.

There are several types of cells:

for the young;
for adult rabbits;
for a rabbit with offspring;
for giant rabbits;
solid wire;
cells from Zolotukhin;
cells from Tsvetkov;
Rabbitax.

It is customary to keep rabbits with babies together, and for already grown up rabbits they build a separate house.

A standard two-story house for adult rabbits is easy to build.

On the drawing, it will look like this:

Drawing of a bunk cage for rabbits.

Cage for young animals

The grown rabbits weaned from their mothers are kept together, in groups of 10-20 individuals. In the manufacture of cells, they are guided by the minimum dimensions: the total area is 300 × 100 cm and the ceiling height is 50-60 cm. ). You can install a completely mesh floor, but make a separate warm room for the rabbits. In winter, it is carefully insulated with hay and straw.

Important. One rabbit should have at least 0.2-0.3 square meters. m. area.

Some farmers do not make separate housing for young animals, but settle them in cages intended for adult animals. At the same time, it is calculated how many rabbits can be placed in one cage in order to provide them with comfortable conditions.

For adult rabbits

For adult animals of medium size, cages with a depth of about 70 cm, a height of 60 cm and a length of at least a meter are suitable. Used here block construction, and each block, in turn, is divided by the grid into two cells. For the mating period, the partition should be removed, combining two sections into one.

For adult rabbits, you can make a block of cages in 2 or 3 tiers.

You can make a two-tier and three-tier cage. It will be a little more difficult, but it will save space on the site.

In any cage, a separate place for sleeping, eating or walking should be equipped. To do this, the cage is divided by a plywood partition with a hole (20 × 20 cm) located at a height of 15 cm from the floor. The sleeping compartment must have a solid wooden door, and a place for eating and walking - mesh. The resting place does not need to be made large. Ideal dimensions, approximately 30x60x50 cm.

House for a rabbit with offspring

You can often hear the opinion that a rabbit with babies needs a separate mother liquor only in winter period, and in the summer, an ordinary cell is enough. But you need to remember that in an open room, fenced only with a net, the female will be nervous and worried. This can adversely affect the health of the offspring. In the mother house, there must be a closed, warm place for the nest and a large space for walking, with a mesh front wall.

This is one of the simplest and functional options house for a female with offspring:

The photo shows a two-tier cage for rabbits with hinged nest compartments.

A frame is made of durable bars, and the back wall and two side walls are made of plywood. The cage is immediately divided into two sections: a large one for walking and a small one for the nest. For each of them, separate doors are made (mesh and solid wood). The walls, floor and ceiling in the mother liquor should be double, according to the sandwich principle. Styrofoam or straw can be laid between them. The roof is covered with slate.

Home for giant rabbits

Cages for these large animals must be much larger than normal. Adults can grow up to 60 cm in length and reach a weight of 7.5 kg.

There are many giant breeds:

butterfly;
German Risen;
grey;
Belgian;
ram;
white;
blue Viennese.

The minimum dimensions of a house for one rabbit should be as follows:

height 55-65 cm;
length 0.9-1.5 m;
width 70-75 cm.

If possible, it is better to increase the parameters of the dwelling.

For young rabbits, a special group cage is built, 40-50 cm high and about 1.2 square meters in area. m. Considering the rather big weight of animals, they strengthen the floor well. It is also made from galvanized mesh, only thicker. So that such a floor does not sag, a crate is made under it from bars located at a distance of 3-4 cm from each other.

Giant rabbits are recommended to be kept in spacious cages with a solid floor.

Some rabbit breeders lay a solid wooden floor in cages and install under it plastic pallets. But cleaning in such a cage will have to be done at least twice a day.

Solid wire cage

This is the most a budget option rabbit housing, which can be installed both outdoors and indoors. These lightweight and durable cages take up little space and are easy to store and clean. For their manufacture, two types of mesh are required: a larger one for walls and ceiling (diameter 2.5 * 5 cm) and smaller - for the floor (1.5 * 5 cm). The frame is built from a durable timber, with a leg length of 50-70 cm. For the winter period, such a structure is placed in an insulated barn, and in the summer it is taken out into the street.

Cages for rabbits from Zolotukhin

The famous breeder N. I. Zolotukhin developed his own, original, simple and inexpensive design dwellings for rabbits. There is no need to do daily cleaning in the cages, and the animals in them feel comfortable and get sick less.

Zolotukhin's cage is a three-story building with a sloping plywood floor. The mesh is laid on the floor only in a small space at the rear wall, without a pallet. The second tier is shifted relative to the first by the width of this grid. The third one is the same. The front wall (common for all three floors) forms a slope. Each compartment is equipped with a tilting feeder.

This is what Zolotukhin's three-tiered cage looks like from the back.

For the construction of the cage you will need: wood, straight sheet slate, metal mesh, polycarbonate and tin. Pre-manufactured wooden frame, partitions and doors of the mother liquor. Mesh is used for cage doors and the back of the floor. The floor itself is made of slate, and the back wall is made of polycarbonate. All wooden parts located inside the cage are upholstered with tin.

Cell dimensions:

height 150 cm;
width 200cm;
depth about 70-80 cm;
floor slope 6-8 cm;
mesh width in front of the back wall 15-20 cm;
door size 40*40 cm.

Each floor is divided by a partition into two sections, and between them there is a place for a sennik.

Cells from Tsvetkov

An experienced farmer A. A. Tsvetkov proposed the idea of a two-story mini-farm for rabbits, consisting of 4 separate sections. Distinctive feature such cages are: two gravitational feeders, two mounted mother liquors, original ventilation and manure removal systems.

The frame is built from coniferous timber and must be painted with white nitro paint. Suitable for making sennik moisture resistant plywood, not less than 8 mm thick. From the inside, the sennik is upholstered with a metal mesh, it also plays the role of a door in each section.

The photo shows cages for rabbits, made according to the drawings of farmer Tsvetkov.

All wooden parts are sheathed sheet metal, the cone for collecting manure is covered with slate mastic. For the roof, you can use slate or roofing material. The water in the drinkers is heated using a boiler.

Rabbitax cells

Cells "Rabbitaks" are different designs and modifications. The simplest are small two-section options. There are also ecological models based on the technology of redirecting air flows.

There are even real farms for rabbits "Rabbitaks", in which more than 25 individuals live and breed at the same time. On sale you can find great amount varieties of these cells. You can make "Rabbitaks" yourself. As a basis, you can take the drawings of the rabbit breeder I. N. Mikhailov.

Cell manufacturing rules

In order for the rabbits to be comfortable and comfortable in the new house, a few simple rules must be observed during construction:

all wooden protruding parts inside the cage are upholstered with tin;
for a roof device it is better to use slate;
you can not use antiseptic, varnishes and impregnations;
for the floor, take a grid with cells with a diameter of 1 * 2.5 cm to 2.5 * 2.5;
the frame is built from a durable wooden beam (at least 5 * 5 cm);
the back wall of the cage is made of plywood.

The floor in rabbit cages is made of wooden slats or mesh.

How to build a rabbit hutch

When the drawing is selected, materials and tools are prepared - you can start building. First you need to assemble a frame from a bar and lay a mesh floor. In outdoor conditions, the floor will have to be insulated and removable pallets made under it (for cleaning).

Next, install the back wall of plywood. It should be lower than the front. The side walls are also desirable to be made of plywood. In a double cage in the middle, a sennik is equipped. And the front wall can be made of mesh, with a door. If the cage will always be on the street, then you should take care of the insulated sleeping compartment. The sloping roof is covered with slate.

What do we place inside the cage

The internal contents of the cell may vary. It depends on who will live in it. So, for a rabbit with babies, it is necessary to arrange special queen cells and nesting compartments. When group keeping young animals, warm nesting rooms will also be needed. Often they are equipped with special indoor enclosures for walking. In each cage, there must be bunker devices, drinkers, feeders, senniks.

It is advisable to place the feeder and drinker outside the cage so that the rabbit cannot gnaw on them.

Choosing a place to install the cage

Before you start building, it is important to decide on the placement of the cage. It should be a comfortable place protected from through winds. Do not install a rabbit house on south side, because in summer the animals will suffer from heat. It is necessary to strictly observe the size of the cage, depending on the breed and the number of rabbits. For ease of cleaning, a removable roof is made in the cells.

If the animals live on the street all year round, then the floor is best made of wood in the form of a retractable pallet. And already on top to fill the crate of the rails. Feeders and drinkers can be removable. The walls and ceiling are insulated with foam, and a warm floor with heating is installed in the uterine compartment.

We offer you to watch a video instruction that will help you build cages for rabbits with your own hands.

Breeding and keeping pets involves a large degree of responsibility of the breeder and requires strict adherence to certain rules. One of the most important is the creation of acceptable living conditions for the animal. They should be close to nature.

rabbits have a high degree resistance to various diseases. They are unpretentious to food and conditions of detention, easily multiply. But despite all this, animals need a properly organized home.

The construction of a pet house must be approached competently. This takes into account the number of animals, their sex composition and age.

What is needed for rabbit breeding?

To do at home, special cash costs are not required. It is necessary to have cages for animals, drinkers, containers for food. All this is easy to do with your own hands.

Harvesting hay and branches can be done in the summer. Root vegetables and vegetables are easy to collect in own garden. The main expense will be the vaccination of animals and the purchase of concentrated feed.

In each cage, same-sex animals of approximately the same age, weight and character should be placed. It is recommended to place adult animals and females with rabbits in one- and two-section cages.

The sizes of rabbit cages have standard indicators:

length - 100-120 cm;
height - 50 cm;
width - 70 cm.

For young rabbits, wooden cages covered with steel mesh are suitable. Their sizes correspond to the sizes of animals. For example, for 10 individuals, a cage with the same dimensions as indicated above will become acceptable, but its length should be 170 cm.

How to build a single tier cage?

Many are interested in how to make a rabbit cage with your own hands. Of course, if available the right materials it's not that hard. The article presents drawings of rabbit cages. Recommendations are also given on the choice of materials for work.

For the outside in the cage system, double single-tiered rabbit cages are the most popular.

The length of such cells is 220-240 cm, and the width is 65 cm. The height of the wall in front is 35 cm. The roof should be with one slope, equipped with a visor protruding forward by 20 cm, and from the sides by 10 cm.

Two compartments for food are built in the cage. The floor is made of metal mesh. The size of the cells should be equal to 18x18 mm or 16x48 mm. The grid should be superimposed with a width of 2 cm, and the gap between them is 1.5-1.8 cm.

rabbit cages with their own hands with the correct design, they should have a partition with a hole, the width of which is 17 cm and the height is 20 cm. It should be located between the nesting place and the aft compartment in order to prevent the rabbits from penetrating from the nest into the aft compartment. The manhole is constructed at a height of 10-15 cm from the floor.

From the front side, two mesh doors are hung on the cage, which lead to the feeding compartment, as well as two solid board doors leading to the nesting compartment. Feeders with a removable structure and drinkers should be hung on the doors leading to the feed.

For feeding roughage crèches are established between departments. They are based on two wooden frames, on which a mesh is stretched. The size of the grid cells should be 20x50 mm. The lower ends of the frames are aligned, and the upper ends are moved apart to the sides of the feed compartment. The result is a V-shaped nursery for roughage.

What materials will be needed?

To build a single-tier cage for two individuals, the performer will need:

Plywood with an area of 2 m 2.
Metal mesh with mesh size 18x18 mm or welded mesh 16x48 mm (1.3 m 2).
Grid with cells 35x35 cm or 24x48 cm (0.6 m 2).

Production of bunk cages

The level of costs for the construction of a bunk cage for animals is not so high. This is because the design is simple. In addition, cash costs will pay off in the first months of use.

What materials will be needed?

To make a cage with two tiers, you will need:

Two wood fiber boards.
Bars measuring 60x100 mm (4 pcs.).
Picket fence strips (50 pcs.).
Roofing material 4x2 m in size for the construction of a pallet.
Nails.
Dye.

What equipment will be required?

Two deep bowls covered with enamel (their diameter should be 220 mm).
Manure collection tank (approx. 300 mm high).
A pair of VPI-03 (also used for household purposes, immersed in water).
Step down transformers 220x127 V (4 pcs. for 8 cells).
Five-liter polyethylene canisters (4 pcs.).

Cell design

Rabbit cages need to be arranged according to how the light will fall. The blank closed wall, where the nurseries and feeders are located, should face north. This protects the animals from the winds and cold.

The roof is constructed in such a way that it overhangs 90 cm from the north, and 60 cm from the south. From the west and east, the roof should be on a par with the protruding beams.

Two-tiered rabbit cages contain a stand-frame, lower and upper tiers. You can also build a roof from a roof. As a rule, use transparent or translucent material. You can also use ruberoid.

The tier on top is a jig, that is, it will serve as a place for rearing rabbits after the end of feeding with mother's milk. This room is made from different cells. One of them should be larger than the frame.

The jig is divided into two parts by means of a feed trough, which has outlets on both sides. A common canister drinker is also installed here. Each compartment should be equipped with a folding feeder for mixed fodder, nurseries for fresh and dry grass. They look like an opening door. A door adjoins the drinker.

The floor of the tier is horizontal. It can be based on slats of wood, which are located at an angle of 45º so that small rabbits cannot injure their paws. All walls and doors of the cage are made of lattice. The exception is the north side.

Below is the uterine tier. It consists of two compartments: nesting and walking. It may also include the same components that are present in the upper tier.

The nest compartment has a removable floor. It is located below the rest of the tiered area. A mother liquor will be placed in this compartment. Before the rabbit brings the babies, she will instinctively make her way into it herself.

The rest of the nest must be stationary. It is supplied with a wall with a manhole, overlapping with a valve. It is better to equip the door to the nest with hinges from below, so that when open it serves as a platform for the animal.

The walking compartment is provided with a floor of slats arranged perpendicularly. This provides structural rigidity. In the area for walking there is a canister drinker, a folding feeder and a bunker feeder for compound feed. Nursery on the rack of the back of the paddock. A door must also be installed for the drinker.

In the floor of the walking compartment, a window is constructed for the end of the conical shaft, which is fastened under the floor of the upper tier. The pitched shaft communicates with a bunker equipped with removable door and a manure container. Thus, the rabbit cages will be cleaned through special doors, which will also make the feed containers accessible. The containers themselves are located under the inclined grids of the feeders.

At the bottom of the cage frame is the electrical equipment compartment. In parallel, this place serves as a bunker for rabbits. It must be locked. For convenient loading of the feeders, it is necessary to build it folding outwards.

The design of the feeder for compound feed has a body with windows for rabbits, as well as a pallet. It is constructed from a mesh with small cells.

All folding components must be equipped with handles, hinges and latches, as well as, if necessary, mortise locks.

The side and front walls are tightened with a fine mesh, the working side can be closed with a mesh with large cells.

Mini-farm from bunk cages

To build a small farm based on two-tier cells, you do not need a lot of space. One cell occupies 1.4 m 2. If you build a farm of two rows and use eight cells with an opening between them of 70 cm (measured along the legs) and a passage of 110 cm, then the area of \u200b\u200bthe farm will be 25 m 2.

Each cage simultaneously contains up to 25 rabbits. A rabbit with a new offspring will sit in the lower part, and the previous offspring will sit in the upper part.

For a number of years, cages with two tiers have been used on experimental farms and have shown their high profitability and profitability. So their use is recommended to all farmers.

Making a family block - cages from three sections

Making rabbit cages with your own hands of this design is a more difficult task. But such family blocks are very convenient for breeding animals. The male lives in the central part, and the rabbits are on the sides.

Partitions made of wood between the cell compartments are equipped with manholes with plywood latches. They are designed for easy replanting of females to the male and returning them back to their compartment.

What materials are the cells made of?

The basis of the frame can be made up of bars. The walls on the sides, the compartment for the nest with doors and partitions are built from lining.

For the front wall, a metal mesh is used. An attic part is provided in the nesting compartments - this is a free space between the ceiling and the common roof, where female rabbits can rest.

An additional convenience is that the layout of the feeders and drinkers is thought out in such a way that they are not subject to contamination and can be filled from the outside.

Cages for rabbits designed by the breeder N. I. Zolotukhin

The well-known rabbit breeder N.I. Zolotukhin has been breeding these cute animals for several decades. Such rich experience helped him design a new cage for rabbits.

Features of the breeder's cells

The floor is solid. Its basis is slate or boards.
There are no pallets in the cages.
A narrow strip of mesh floor is located only along the rear walls of the structure.
The rear walls are set at an angle so that rabbit waste from the upper tiers does not fall on the rabbits in the lower tiers.
There are no special queen cells. The rabbit builds her own nest before giving birth.
Grain feeders are attached to the doors, which flip outward to fill.

The scheme of the rabbitry is presented below.

How to make cages for the breed with your own hands?

If you want to have dwarf rabbits at home, then their cages are built in a different way. There are many in pet stores. different models. But you don't have to buy them. cage for pet You can do it yourself and it won't take long.

The structure consists of two walls on the sides, the size of which is 70x70 cm. The back wall is attached in such a way that a gap is obtained under the cage. The back wall is 55 cm high and 100 cm long.

Meter rails are nailed to the bottom of the cage. A metal mesh is fixed on top of them.

The lid of the cage is made of mesh on hinges. It is provided with a handle. A pallet is installed under the cage.

How to choose a grid?

In the manufacture of rabbitries, of course, you will need a mesh. In order for the manufacturer to better understand which mesh choice will be optimal, we recommend using a number of tips.

Many people ask the question: is a galvanized mesh, steel or aluminum material suitable? It is better to opt for steel structure because it is durable.

To make a wooden cage with mesh doors and a floor, the mesh must be chosen carefully so that it does not injure the paws of the animals. Experienced breeders advise using it with small cells. Metal material is used. The mesh thickness is 2 mm, and the mesh size is 16x48 mm. For the construction of the side walls of the cage, a galvanized mesh is suitable.

For the construction of the door, any kind of mesh is used. It doesn't have to be welded. Wicker is also allowed.

In the warm season, animals can be kept in a cage fenced with a net. A wicker construction with a thickness of 1.2 mm is suitable for it.

Breeding rabbits in a suburban area or cottage requires a lot of knowledge about the lifestyle and habits of these animals. Much attention is paid to their diet and diet. At the same time, we should not forget about rabbit houses, since clean and comfortable housing is the key to the health and well-being of furry pets. There are many designs of rabbit cages made from variety of materials with your own hands. The wooden structures brought to your attention can simplify the care of animals and become an adornment of the economic zone.

Rabbit hutch, simple design

Due to the simplicity of the design, such a cage can be made with minimum experience work with carpentry tools. To make it you will need wooden slats and bars, plywood, metal mesh, shingles and plexiglass. Despite the fact that this type of cage is not particularly difficult, it looks beautiful and interesting, which will be appreciated by all members of your family.

We assemble the frame of the cage for rabbits

To facilitate the process of feeding animals, the cage is installed on a dais, constructing an additional stand. The height is selected in such a way that both adults and children can take care of the animals. To have food and hay at hand, and also not to look for additional space for storing food, the frame is equipped with a spacious shelf.

Cages for rabbits blueprints

For the supporting posts of the cage, you will need a wooden beam with a section of at least 60 × 60 mm and a height of 850 mm.

When cutting wood, do not forget to process the edges of the rails. This will avoid splinters and increase the aesthetics of the design of the cage for rabbits.

The base frame and shelf support are attached to the main racks. To do this, four boards are screwed with screws in the upper part of the frame and at a distance of 372 mm from the floor. It is important to correctly mark up and follow the geometry of the structure using a carpenter's square and level. You should get a smooth, stable structure without distortions and curved corners.

To make a cage with an additional compartment, a neat figured cut is made in the front board of the upper frame. The cut out part is attached to the old place with a piano loop. A narrow hinged part will provide access to the inside of the cage in the future.

FROM inside the upper and lower frames are mounted as spacers additional slats. They eliminate the precariousness of the structure and serve as a support for the flooring, therefore, they require especially careful adjustment.

Do-it-yourself rabbit cage step by step instructions. A photo

In the corners wooden shields or boards used as a shelf and base of the cage, make a cut under support legs. The shields are installed in their places, after which the work at this stage is considered completed.

Assembling the main compartment

A rabbit cage should please the owner not only with its strength and reliability, but also with an attractive appearance. They begin to assemble a cage for rabbits from the front, and step-by-step instructions will help you to understand in detail all the nuances of working with your own hands.

Cages for rabbits blueprints

At the first stage, they collect box under the door. To do this, a rectangular frame is assembled from the rails with the help of furniture dowels and self-tapping screws. A groove is cut out for the vertical movement of the door. A sliding partition frame is made a little larger than the height of the box. Dowels are installed from the outer surface, after which the door is put in place, leading the dowels into the prepared slots on the side jambs.

Branches are mounted from wooden slats on both sides of the opening. Assemble the back of the structure, as well as the side walls.

How to make a cage for rabbits. A photo

Eight rails, from which the roof rafters will be made, are cut at an acute angle. The rafters are assembled by fastening the pointed elements in pairs, after which they are finally fixed with self-tapping screws. After that, the staples are removed, and the rafters are attached to the base of the roof.

Triangular elements are cut out of a sheet of plywood, which block access from the doorway to the roof. They are fastened with self-tapping screws to the central rafters in accordance with the attached diagram.

Do-it-yourself rabbit cage step by step instructions. A photo

The roof is sheathed plywood sheets cutting them according to the drawing. The rear slope is made with a cutout mounted on a piano loop. The hinged part of the roof will facilitate access to the interior of the cage. To join the central part of the front roof slope with the side elements, small sections are cut out in its corners.

After the assembly of the base of the rabbit cage with your own hands is completed, the structure is treated with drying oil, dried, and then painted with one or two layers oil paint. Despite the longer drying period, it will reliably protect the wood from moisture.

How to sheathe the walls and roof

Cages for rabbits blueprints

The inner side of all the walls, as well as the door of the cage for rabbits, are sheathed with their own hands using a screwdriver, self-tapping screws and a metal mesh with a cell size of no more than 25 × 25 mm.

First, the ends of the cage are sewn up, and then the front wall is mounted over the doorway.

In order for the design to be convenient to transport, reclining handles are screwed from the sides of the support frame of the frame.

On the front board of the upper support frame, install gate valve for fixing the narrow reclining part.

The latch is also installed on the cage door.

Decorate the design can be a figure of a rabbit, cut out of plywood. It is painted, and then glued or fixed with screws on the front wall of the roof.

Protect piano loop, which ensures the mobility of the reclining part of the roof, is possible with the help of a universal adhesive tape. Glued over the metal, it will prevent rust and ensure reliable operation of the part.

Using a stapler and metal staples from 8 mm in size, they attach to the roof sheathing of the rabbit house shingles.

Do-it-yourself rabbit cage step by step instructions. A photo

Taking advantage special glue for soft roof, from a long, narrow piece of bitumen canvas equip roof ridge.

cut out plexiglass according to the size of one of the side walls, after which a latch is mounted in its upper part. If necessary, this element will be able to protect animals from drafts and rain. Plexiglas is installed on the frame, fixing it in the lower part with furniture dowels, and at the top - fixing the bolt latch in a pre-drilled hole.

Small ladders and an inner house are collected for animals. After impregnation with drying oil, the parts are painted and placed inside the cage.

After the paint is completely dry, the cage is transferred to permanent place, prepare provisions and settle the rabbits in their new home.

Despite the fact that rabbits are not particularly demanding animals, it is still better to rely on the opinion of experienced people in the manufacture and placement of the cage.

The main criterion for choosing a place for installing a rabbitry is the lack of drafts. In addition, in the summer it is better for animals to be in the shade, so you will have to equip a canopy or place cages in a barn.

We must not forget that when breeding rabbits, young animals will have to be resettled, pregnant females and males will have to be kept separately, etc., so it will not work with one cage. It is better that there is always a free room at hand, and the cages themselves should have walking areas.

Listen to the advice of experienced rabbit breeders, and you will not have to correct your own mistakes and miscalculations.

Floor rabbitry is best made from mesh or slats laid at a distance of 1.5 cm from each other. When operating the cage outdoors, they also equip the lower, reclining tier of the floor from the boards.

roof cages installed indoors are made of the same material as the walls. On the street, the rabbitry is covered with waterproof roofing material. Tin for this is better not to use.

On the street, houses for animals are located on supports height from 0.5 to 1 m. It is best if there is also a house with a cutout in the form of a “burrow” inside the cage.

Cells are divided into several branches, providing a hole for animals from one part to another, as well as hinged covers for cleaning individual "rooms".

The dimensions of the rabbitry, in which it is planned to keep the males, are made sufficient for their free range. It must be remembered that males who lead a sedentary lifestyle can become infertile.

For every 3-4 females make separate spacious cage.

rabbits contain in the same room with a nursing rabbit. At the same time, they keep one cage free nearby, placing the mother with the smallest animals there for additional feeding.

The best material for a rabbitry is wood - boards, slats, plywood, glued panels. They make a power frame and a roof. Depending on the climate and the place of installation, the cage walls are made of mesh, plywood, slats or boards. In progress Special attention removed when finishing materials so that animals cannot be injured by splinters, sharp parts of the mesh or protruding edges of nails and self-tapping screws.

Sizes of cages for rabbits

The dimensions of the cages for breeding rabbits vary widely depending on the size of the animals, the breed, the purpose of the cage (for males, females with children, rabbits, etc.).

For lactating rabbits cages should be at least 1.70 - 1.85 m long, 1 m wide and 0.6 - 0.7 from floor to lid. Cages are placed at a distance of 0.7 - 0.8 m from the ground on goats or supports. Animals weighing from 5 kg require rabbitries 1.3-1.5 m long and up to 0.7 m wide. At the same time, the height of the back wall should be 0.4-0.45 m, and the front wall should be 10-15 cm higher.

young growth rabbits are placed in group rabbitries, where they contain from 8 to 20 individuals. From 3 to 5 cubs who are under 3 months old are settled in individual cages. Older animals are placed no more than 2 - 3 animals per cage. At the same time, at least 0.5 square meters should fall on one individual. m of area, and the height of the rabbitry should be more than 35 cm. In group cages, one rabbit should have at least 0.2 square meters. m, which must be taken into account when making a rabbitry and placing animals.

Sizes of the cage for rabbits. A photo

An adult requires a room with a minimum size of 1 × 0.6 m and a height of 0.6 m, however, these dimensions are best increased by 20 - 30%.

Cells are placed in one or two tiers (the so-called shed). Depending on the size of the animals, the width of the shed is made no more than 2 m, and the depth - up to 1 m, setting the cages at a height of about half a meter.

For okrol, a double rabbitry with a mother liquor is used - a removable feed compartment for keeping animals up to 1 month. The cage is divided into compartments wooden partition with a hole 17x20 cm.

The main thing is that the animals in captivity feel comfortable, so it is recommended that you follow all the tips for their placement and maintenance.

Cage designs for rabbits

With a two-tiered rabbitry portable type facilitates the care and feeding of rabbits. It is enough from time to time to rearrange the structure to a place with thick grass - and the animals are provided with food and a clean place for walking.

Photo cages for decorative rabbits

A wooden structure, on the roof of which there is a low box with a moisture-proof bottom, will allow you to grow seedlings or greens on the roof of the rabbitry. This solution has not only high practicality, but also looks spectacular on the site.

Cage for rabbits. A photo

"Two-room" house for animals with common room for feeding facilitates the care of animals and allows you to increase the space intended for their walking.

Large cage for rabbits. A photo

Cage designs for rabbits, in which animals have access to walking on the ground, are beneficial not only from the standpoint of keeping animals, but also from the economic side. When enough large volume cells, its manufacture does not require large material costs.

A triangular cage-hut with an aviary for walking is easy to make. For the day, a similar structure is placed in a place with thick grass, and at night the cage is removed to a stationary elevation.

The spacious rabbitry, designed for two places, has a presentable appearance thanks to the roomy structure, flexible roofing and light colours. Black metal elements complete the picture. door hinges and valves.

A large summer house for breeding rabbits allows you to keep up to ten individuals. The high door of the structure allows you to enter inside for feeding, cleaning and inspecting animals.

The cage of increased depth, divided into two rooms, allows you to keep several individuals on each half. The enlarged yard gives comfort while walking and feeding animals. Contrasting coloring and copper fittings of the cage add elegance and presentability to it.

Cage for decorative rabbits. A photo

Rabbit cages installed at a height are often performed in the same building with an aviary. The common roof saves material during the construction of the rabbit hutch and provides a comfortable and spacious environment for the animals.

Rectangular rabbitry with pitched roof very easy to manufacture and provides all the comforts for animals and care for them. A simple rabbit cage can be made from wooden bars and slats, boards and wooden lining, and cover the roof with slate or soft roofing.

Do-it-yourself Zolotukhin's cells

Cells designed by a Russian rabbit breeder Zolotukhin have gained immense popularity due to their simplicity, low cost and ease of care for the animals.

The benefits of this cell type include:

sloping slate or plywood floor with mesh near the back wall;
three-tier structure of six cells. Shifting the cells to the width of the grid in the floor allows for easier cleaning;
the possibility of arranging a mother liquor in an ordinary cage;
feeder special design, which does not require opening the door when dispensing feed;
low cost.

The improvements adopted by the experienced rationalizer rabbit breeder bring rabbits closer to the conditions in which they are in their natural habitat.

Design features

To make a cage for Zolotukhin rabbits, you can use wooden planks and laths, slate sheets, tin, polycarbonate panels, metal mesh.

The frame of the structure and partitions are made of wood, and the floor and roof are made of flat slate. The mesh is upholstered with doors and a small part of the floor near the back wall. wooden elements the structures are sheathed with tin so that the rabbits do not gnaw them.

Rabbit cage size:

cage width - 2000 mm;
height of a three-tier structure - 1500 mm;
depth - from 700 to 800 mm;
doors - 400 × 400 mm;
floor grid width - 150-200 mm;
the difference in the level of the front and rear parts of the floor is from 50 to 70 mm.

Drawings of Zolotukhin's cells. A photo

Each of the three levels consists of two cages separated by two wooden partitions, between which hay is stored. The floor, also known as the roof for the lower tier, is made of slate. The rear part of the floor up to 200 mm wide is made of mesh. Each upper cell is extended by the same amount relative to the lower one, so that the feces are removed to the floor or ground. The back wall is made of polycarbonate and installed in an inclined way.

The exact dimensions for the manufacture of cages are not needed, the scheme given by the rabbit breeder is enough. This structure is a structure with a mother liquor, therefore, for the usual maintenance of rabbits, the wall with the opening will need to be replaced with a solid wooden shield.

The door of the mother liquor is not made of mesh, since the nest needs blackout and shelter from drafts. To prevent the young from falling out when harvesting or feeding, a board 10 centimeters wide is nailed in front of the shelter.

The design with a fenced off mother liquor makes it easy to expand the space for growing rabbits. To do this, it is enough to remove the wooden partition.

AT winter time Zolotukhin sets in a cage mother liquor-burrow. He is wooden box with increased height of the back wall. This allows you to create the necessary expansion in the depths of the rabbit hole. The mother liquor hole is cut out in such a way that there is no threshold between the box and the floor of the cage.

Dimensions of the winter queen cell of Zolotukhin's cage for rabbits:

upper and lower part - from 300 × 300 to 400 × 400 mm;
front wall - 160 mm;
back wall - 260 mm;
opening height - 150 mm.

The feeder is a long tray that occupies 2/3 of the length of the cage. Its anterior wall is doubled compared to the posterior one, and the bottom slopes into the cell at an angle of up to 35°. The feeder is fastened on a rod hinge, which allows you to install the tray in the door. This eliminates the need to open the cage when feeding and makes it easier to clean the feeder from leftover feed.

Cages for rabbits with their own hands. Video

As you can see, making a cage for rabbits with your own hands is quite simple. At the same time, it is important to ensure the convenience and safety of pets, as well as to provide for ease of feeding and cleaning.

To breed eared rodents, you will need cages for rabbits, which you buy or make yourself. By design, as well as by the materials used, the houses can be varied. Do-it-yourself cages can be made simple or more complex by additionally equipping them with heating, water supply. The choice of one or another design will depend on the planned livestock, breed, the availability of materials at hand and the location of the rabbitry.

To make cages for rabbits with your own hands, the drawings should be studied in advance. Properly selected design will provide pets with the best conditions for normal growth and development.

What to Consider When Designing Cells

Although rabbits are unpretentious animals, it is still better to build cages and place them, adhering to the advice of experienced breeders. The first thing to start with is choosing a place where the cells will be located, since drafts are unacceptable. AT summer period animals need shade, which will require a canopy. It should be remembered that rabbits need several cages. To each his own home: for adults, for a pregnant rabbit, and after birth - for young animals. It’s better to do everything right from the very beginning so that you don’t have to correct mistakes later, so listen to the recommendations of experienced people.

As already noted, cell designs can be different, but the floor is made of mesh or wooden slats, which are laid at a distance of 15 mm from each other. The same materials are used as roofing as for wall cladding, provided that cells are placed in the room. For street maintenance, the roof is made of roofing material preventing the ingress of moisture. Tin for these purposes will not the best option. The location of rabbit cages is provided at a height of 0.5-1 m from the ground.

The houses can be divided into several compartments with a manhole, and also have a hinged lid design for easy cleaning of individual sections. Laz will allow animals to move around the entire area of \u200b\u200bthe dwelling. The rabbitry for keeping males should be of sufficient size for spacious movement. It should be borne in mind that a sedentary lifestyle of males leads to infertility. For females, the houses are made no less spacious. 3-4 rabbits can be placed on one square.

Young animals are kept in the same room with a nursing female. There should be a free cage nearby, where a nursing mother with rabbits is placed, if there is a need for additional nutrition.

The best materials for the construction of cells - wood. With their help, the frame of the future structure and the roof are assembled. Various materials can be used for walls, the choice of which depends on the installation site, region and what is available on the farm. The most common are: plywood, mesh, boards or wooden slats. The choice depends on the capabilities and preferences of the rabbit breeder. The manufacture of cages for rabbits should be carried out carefully with careful processing of blanks: nails, screws, splinters, sharp edges of the mesh should not protrude. Otherwise, the animals may be injured.

DIY rabbit cage (video)

Choice of cell size

Before proceeding with the construction of a particular structure, you need to find drawings with dimensions according to which the assembly will be carried out. It is possible to independently develop a scheme. As already noted, in order to keep and breed rabbits, you will need several different cages, which will differ both in purpose and in parameters.

The dimensions of the cages for rabbits should be as follows: length - 140 cm, width and height - 70 cm each. The compartments are delimited by a hay and grass feeder. Rabbit cages can be arranged in 2 floors, which will save space. In addition, you will need to build a cage for young animals, where pets are kept in groups. The construction does not cause difficulties and is carried out according to the following dimensions: height - 60 cm, length - 200 cm, width - 100 cm. The dimensions of the do-it-yourself rabbit houses are calculated based on the estimated livestock that they will contain. One rabbit should have at least 0.12 m². Quite often, separate housing is not designed for young pets, but they are kept in standard cages designed for adult rabbits, taking into account the required area.

Special attention deserves a house for a rabbit, which is also called a mother liquor. In a cage for a female with young animals, it is necessary to organize 2 compartments: uterine and stern, which should be separated by a partition with a manhole. They place it slightly above the floor level so that the rabbit cannot get out on its own. The dimensions of the uterine compartment should be as follows: height - 20 cm, length and width - 40 cm each.

The house is located in the uterine compartment immediately before the birth. In the event that a giant rabbit breed was chosen, then the standard sizes of houses will not suit them: you need to take care of a few large structures. To successfully breed giants, you will need housing 70 cm wide, 170 cm long and 55 cm high, and these are the minimum dimensions. If you plan to grow giant rabbits, the dimensions of the cage for the rabbit should be 80 * 100 * 65 cm, and for the female with young animals - 100 * 150 * 65 cm.

Building cages for rabbits

A do-it-yourself rabbit cage, the step-by-step instructions for which are given below, consists of two sections. Even a novice rabbit breeder can do its manufacture. Preparing everything before assembly necessary materials and tools, we cut blanks from a wooden beam. Consider further description:

From wooden slats, a frame is made 70 cm high, 150 cm long, 55 cm high in front and 35 cm in back.
Assembled structure sheathed with plywood or boards.
Inside the cage, a compartment is provided for a mother liquor or a house for rabbits.
Between the compartments for food and the nest, a partition with a manhole is installed for the free movement of animals.
The roof is best done on hinges so that it can be easily lifted when necessary.
For the nesting compartment, a deaf door is made of wood. For stern - use a metal mesh with cells of small dimension.
A grid with small cells or wooden slats is used on the floor.
In the nesting compartment, the floor must be made of solid wood.
Under the cage have a pallet for collecting manure.

Regardless of what the cage is made of - mesh or wood, inside it can be independently equipped with feeders and drinkers, and a hay compartment can be installed. Knowing how to make a cage for rabbits with your own hands, you can save a lot, because the costs will be required only for materials.

Cage for rabbits with uterine section

Having decided, you will have to think about the design with a nest compartment. Consider the sequence of actions on how to assemble a cage and a built-in queen cell for rabbits with your own hands, the drawings of which are easy enough to disassemble even for a non-specialist.

The algorithm of actions is as follows:

With the help of wooden bars with a section of 50 * 50 mm, a frame is mounted, and in the places where the feeders will be located, floors are made from the mesh for rabbits.
Mount the rear wall and a solid floor for the uterine compartment.
The side walls are covered with plywood or a board, partitions are placed with holes for the uterine section. Holes (manholes) are made with a diameter of at least 20 cm.
Covers are mounted on the nests.
Feeders are installed by attaching a bar to the cage frame, dividing it into sections.
For the final fixing of the floor mesh, slats are used.
Mount bunker feeders.
Install the roof of the cage and the doors for the feeders.
Solid nested and mesh doors are fixed, after which valves are installed.
When installing a rabbitry on the street, the roof is made waterproof. For this, an additional frame of slats is nailed, to which the roofing material is fixed. A good and most common for these purposes is slate.

The described option is great for home construction due to the presence of a large capacity bunker feeder. In addition, it is possible to install several additional tiers. With a multi-storey arrangement, between each tier, you need to put a pallet for collecting manure or make a surface at an angle, so that the waste will roll into a special container.

Universal cage for rabbits (video)

Cells according to Zolotukhin

Experienced rabbit breeders know that proper house design is an important factor successful maintenance and breeding of eared pets. What follows from this? Even if you make cages with your own hands, you must adhere to certain standards regarding the form of construction and the materials used. If the structure is outdoors, then the roof must be made at an angle so that all precipitation flows from it.

N. I. Zolotukhin, a rabbit breeder with many years of experience, finalized standard drawing cages in order to improve the comfort of animals. The reason for such changes was the observation of the behavior of eared in wild nature. In addition to improving amenities for rabbits, cleaning is easier for the breeder and space is saved. In the construction of cells according to the Zolotukhin method, there are no difficulties, and in terms of cost they are quite cheap. Even beginners can build a house for rabbits, the main thing in manufacturing is to stick to the drawing.

Zolotukhin rabbit cages are endowed with a number of advantages, as a result of which they are widely used among rabbit breeders. One of the important characteristics is the floor of the rabbit house, which is made with a slight slope. The peculiarity of the floor of the Zolotukhin cell is that it is not made completely lattice or mesh. The fact is that the net for rabbits is not very convenient. It is used only near the back wall, so that waste products are freely removed from the cell. This is due to the fact that animals urinate and defecate only in the far corners of their homes.

In addition to the special floor design, Zolotukhin's cage has good ventilation, lighting and darkening in the queen cell. Feeders are fastened in such a way that tipping over by animals is excluded. When making the design in question, it is recommended to adhere to the following dimensions:

height - 1.5 m;
width - 2 m;
depth - 80 cm;
door size - 40 * 40 cm;
floor slope - 7 cm;
the width of the grid for the floor is 20 cm.

These are the features and advantages of the cell according to Zolotukhin.

Cells according to Mikhailov

Another rabbit breeder, Mikhailov, developed a completely different design for the eared house. The peculiarity of the cage is in 2-4 sealed compartments designed to collect manure and one or two tiers. The original design of Mikhailov's cages for rabbits was to contain two adults. To date, there are other options designed for keeping young animals or two pregnant females. Execution of cages can be both one- and two-tiered. In any case, the design implies a common compartment for collecting manure. In addition, the cage has a clear location: the installation is carried out with the back wall to the north, which will protect the animals from the wind. The remaining sides of the dwelling are made of mesh.

In addition to everything, the considered house is equipped with a heating of the mother liquor and drinking bowls, as well as a ventilation system.

In a more detailed examination of the design, the Mikhailov cage is conditionally divided into 3 parts: upper, lower and stand. At the top there are 1 or 2 tiers, at the bottom there is a cone-shaped section that ensures the collection and storage of manure until it is harvested. In order for such a structure to stand securely on the ground, a stand is used. Queen cells, compartments for food and water protrude somewhat. Some design variations are possible: queen cells can be located closer to the center, while drinkers and feeders are inside. To avoid tipping over, the stand must be used without fail. The floors in the cages are wooden, made of slats arranged diagonally. As you could understand, making Zolotukhin's houses with your own hands is somewhat easier. To repeat the design of the described structure, it is necessary to consider the drawings of cages for rabbits according to Mikhailov.

Housing for decorative rabbits

In addition to breeds of rabbits, which are bred for the purpose of obtaining meat and wool, there are also decorative types. Do-it-yourself cages for decorative rabbits can be made without much difficulty. The main thing is to decide how often the rabbit is outside his home during the day. If the eared walks for more than 3 hours a day, then the cage can be 70 * 40 cm in size. In the event that the rabbit is mainly in the house, then it is made at least 100 * 50 cm in size. If free space allows, the cage can be made and large sizes. In general, you should be guided by the same building recommendations as for ordinary rabbits. The process is actually similar: a frame is assembled from slats, the walls are sheathed with plywood, the floor, roof, and doors are mounted.

There are many options for cages for decorative rabbits. Many develop their designs, trying to create the most comfortable conditions for their furry pets. One of the attractive options may be a multi-tiered house with wood carvings, various elements that allow the eared to have fun and hide. It all depends on your imagination.