Ideas for making lamps in the children's room. An important element of decor: do-it-yourself chandelier in the nursery

By making a lampshade with your own hands for a table and pendant lamp, as well as a chandelier, you will give a second life to junk things and save a lot.

DIY chandelier in the children's room

Usually such things are not cheap, but such lighting can be done with your own hands.

In the photo on the left? chandelier from the store, on the right, made by the hands of a craftswoman. These things are not much different from each other, but a lamp made at home is much cheaper than a store-bought one.

To create it you will need:

cardboard;
a pen;
scissors;
tablet lamp;
jigsaw;
plywood;
white emulsion paint;
acrylic paints;
varnish for wood;
sponge;
coarse and fine sandpaper.

On a sheet of paper, draw a flower consisting of 6 identical petals. Its core is slightly smaller than the diameter of the lamp, since when finished, the flower will lie on it, and not be attached to the ceiling.

You can use this template by enlarging it to the desired size. Make a slot inside the flower according to the diameter of your ceiling.

Here's how to make a chandelier in the children's room. Attach a paper flower template to cardboard, circle, cut out this blank. Try it on the ceiling, if something does not suit you, at this stage you can cut or add.

If so, attach the cardboard blank to the plywood, cut out the details from this material with a jigsaw. In the same way, you will create butterflies from plywood. The edges of these parts need to be made more even with coarse and then fine sandpaper.

Now cover these plywood blanks with water-based paint, applying it with a sponge with blotting movements.

After that, separately dilute the water-based paint with acrylic. Apply this mixture also with a sponge on the blanks. To dry them, make the following device: drive the nails all the way into a piece of plywood, turn it over, put the prepared parts here.

When the drying process is complete, coat the butterflies and flowers with wood varnish on both sides. Place these blanks on the prepared fixture for a while to dry.

Using a drill and a thin drill with a diameter of 1 mm, make holes near the edge of the petals and in butterflies, tie a strong thread or fishing line here. Screw the cover into place. Now you know how a children's ceiling chandelier is made.

With your own hands, you can create other light sources. You will make them from waste material.

Bottle table lamp

You can decorate it as you wish by gluing beads of different colors or using the decoupage technique. In the same way, you can decorate not only a bottle, but also a lampshade for a table lamp.

To make it from a decorated bottle, you will need:

hot gun;
screwdriver;
plug;
lamp holder minion;
plug with wire and switch;
a bowl of water;
glass drill.

If you have a light bottle, less than 1 liter, then put silica gel cat litter in it to make it heavier.

It is better to make a hole in the bottle while it is not yet decorated. But if you know how to work with a drill on glass, then you can do it already in a decorated container.

Work in this technique for no more than 15 seconds, after which you need to lower the drill into a bowl of water to cool it. Then the glass will not crack.

Put the plug on the wire. Insert the wire into the hole of the bottle, take it out through its neck, here you will attach the cartridge, glue it to the top of the bottle with a hot gun.

In this case, a purchased lampshade is put on the lamp, after which you can test a lamp made by yourself.

If you don’t know how to drill through glass or don’t have the tools for this, then an old table lamp from a bottle will do.

To make it, you will need:

thick glass bottle with a wide neck;
cartridge;
cord with switch and plug;
silicone hot glue;
thick wire;
the cloth.

Bend the wire, lower the resulting loop inside the bottle. You need to attach a socket to the smaller end of the wire, into which a light bulb of small power is then screwed. A plug and an on-off system are attached to the second, longer end of the wire.

To make a lampshade, make its frame from thick aluminum or copper wire. Stretch a cloth of fabric on it, which must be folded from above and below, glued here, as well as a lampshade on the side.

You can leave the bottle in this form or decorate, for example, with stained glass paints.

If you like the patchwork style, then you can create lamp shades using this technique.

If you want to make it out of paper, then pre-coated with acrylic varnish on both sides. Such a lampshade will gain the necessary strength, it will be convenient to clean it from dust. The dried workpiece must be rolled up with an accordion, then pulled onto a wire frame.

A beautiful pendant lamp is obtained from half a globe. This is a great lamp for the children's room, which will help children learn the names of cities and countries. By gluing children's cubes arranged in a pile, you will get a solid leg for the lamp.

If you do not know how to decorate a table lamp, then wrap its leg with jute rope, gluing the coils.

DIY lampshade for table and pendant lamps

If it has become unusable, do not throw away the frame base.

As in the photo on the left, tie horizontal strips of fabric or braid, you get an original stylish thing.
If you want to update an old lampshade or cover up stains that have formed over time, then cut strips of fabric 8 cm wide, the same length as the lampshade.
Stitch the sides of each by tucking them in. Attach the blanks to the lampshade, pin them here with pins from above and below.
Choose a ribbon of the right color. Also, with the help of pins, attach it to the top and bottom of the lampshade.
Sew along the edge of the braid to fix in this position not only it, but also strips of fabric. Tie them with pompoms made from pieces of the same fabric.

And here's how else you can make a lampshade with your own hands for a table lamp. To do this, take:

shade;
acrylic paints;
glue gun;
threads;
the cloth;
buttons.

Master Class:

Cover the lampshade with acrylic paints if you need to reduce the intensity of lighting or hide stains.
Rewind the part of the lampshade closer to the bottom with a thread, and fix the ends with a glue gun. You can hide them under flowers.
To make such a fabric rose, draw a circle on the canvas, cut it in a spiral, starting from the edges towards the center. In the middle you will sew a button, like a chamomile. Its petals are cut according to the pattern, glued in two rows.

To make another lampshade for a table lamp, you will need to create its frame with your own hands. This will require:

a piece of construction mesh;
pliers;
strong wire;
plastic clamps.

If you have the frame of an old lampshade, take it, if not, create this part from strong wire. Wrap this frame with a metal mesh with small cells. Cut off the excess, fix the sidewalls with wire.

Now you need to attach the plastic clamps to the grate, starting from the bottom, moving up. It is better to take blanks of not one, but several colors. Then you tie the lighter ones from below, and the dark ones from above.

See how mesmerizing this table lamp looks with its new shade when you turn it on.

For the next idea, take:

rice paper;
light bulb base;
strong synthetic threads of white color;
wire or top ring for the lampshade;
scissors;
fluorescent light bulb;
circle pattern or cutting.

Using a circle template or cutting, you need to cut out circles of different diameters from tissue paper. For each type, you will need about 180 pieces. Composing them, collect on a sewing machine on a long thread.

If you started making the first chain from a long circle, then for the second, the initial workpiece will be small. Now these parts need to be varnished. If you have pearl paint, after this layer, go through the circles with it, you will achieve an amazing effect. When this layer dries, apply varnish again on top.

It remains to attach these blanks to the upper ring of the lampshade. To do this, put a chain of circles here, twisting through the top of the frame once.

You will get a wonderful lampshade, which is easy to make for a table lamp with your own hands.

The elements will shimmer, and with a light breeze, they will soar beautifully.

If you need a lampshade for a pendant lamp, you can make it from materials that would otherwise be thrown into the trash. Don't throw away your yogurt boxes. Between themselves, they need to be glued using hot silicone, attached to the frame, you get a wonderful lamp.

Corks from plastic bottles will also go into business. They are glued to each other, forming a rounded shape. From above you need to leave a hole through which you stretch the cartridge from the lamp and itself. It turns out very original and almost free.

Plastic bottles themselves will also go into business. If you have such beautiful blue ones, cut them into identical rectangles, collect them on a fishing line, attach these chains to the top ring of the lampshade.

If the household has a lot of transparent plastic bottles, you plan to make something from them, then the bottom is usually not used. Take these elements, hold them over the fire to give them a whimsical shape. It remains to make holes in them with an awl, string them on a fishing line, and also fasten these details on the lampshade in the form of chains.

Wonderful lamps can be made from the necks of plastic bottles. They need to be cut below the shoulders, then chopped into strips 1 cm wide. You will bend them up, fix them with glue. Using hot silicone, connect the parts, give the product the shape of a ball. Leave a hole on top through which you will pass the cover. If this is a lampshade for a table lamp, then leave a hole at the bottom.

Two more ideas will help you save a lot. If cocktail umbrellas are left from the party, glue them together to create a festive lampshade.

Even read newspapers and magazines will go into action. Cut circles out of them, varnish them in 2 layers. When it dries, you can string these blanks on a strong thread or fishing line. Get another lampshade for a pendant lamp.

If the household has a basket without handles, do not throw it away. Make one or two holes in the bottom, insert cartridges with light bulbs. Such a lamp will add mystery to the home or make a summerhouse romantic.

The next thing you can make with your children. For this you will need:

balloon;
needle;
openwork napkins made of threads;
tassel;
PVA glue or acrylic varnish.

Have the child blow up the balloon. Place fabric napkins or openwork on the rubber surface. Go over them with PVA glue or acrylic varnish. Let the liquid solution dry properly, and then pierce the balloon with a needle. Take it out through the hole. From above, cut a circle smaller than the diameter of the cartridge, put it here.

To prevent the lampshade from catching fire, do not use conventional high power lamps. Take a fluorescent energy-saving one that shines but does not heat.

How to make an alcohol lamp from a light bulb?

Continuing the theme of lighting, we can also talk about the fact that burned out light bulbs are not always advisable to throw away. You can also give them a second chance, so that these things will continue to please you.

You will need:

two burnt out light bulbs;
a piece of cord or wick;
screwdriver;
pliers;
epoxy resin;
washers of different diameters.

Using pliers, carefully remove the bulb from one bulb.

To avoid possible injury, first wrap each of the bulbs with a cloth, as the glass may burst during operation.

Knock out the neck of the flask with a screwdriver or cut it off here with a glass cutter. Remove the spiral from the flask and pour out the rest of the glass.

This way you will make the first light bulb. From the second you need to take only the base. Wrap it with a cloth, carefully break it, take the desired blank. From it you only need a metal part, the insulation must be removed.

Glue the washers to the plinth using epoxy. Set the desired nozzle diameter. Glue the base with washers to the empty bulb of the first lamp. Install the wick here.

To fix the spirit lamp in a fixed position, cut a rectangle out of plexiglass, glue it to it. It is best to fill the spirit stove with ethyl alcohol, which almost does not smell when burned, and the flame is obtained without soot.

When choosing a chandelier for a child's room, there are a few things to keep in mind. The lamp should illuminate the room well, decorate it, and be safe.

And you also need to make a chandelier for the nursery so that it fits into the overall theme of the interior.

In order for the ceiling lamp to fully meet expectations, it is better to make it yourself.

How to make a chandelier in the nursery with your own hands, we will tell you in more detail.

In order for a child to develop good taste from childhood, it is necessary that the nursery be designed in a certain style. And the chandelier is one of the key details. The choice of style depends on the gender and age of the child, on his preferences and hobbies. Let's analyze the main directions, which lamp is suitable for girls and boys, what kind of chandelier for a nursery to make:

The interior style for boys in the nursery should be a little restrained, and at the same time daring and mischievous. It can be minimalism or high-tech. Accordingly, a chandelier for a nursery must be made with the appropriate shape and color. Gray-blue, blue and white colors are typical for minimalism. Hi-tech corresponds to brown and yellow tones with bright splashes. And the shape can reflect the baby's craving for cars, space, sports, robotics. Sports style is good for active boys - chandeliers in the form of balls, racing cars, punching bags.
For girls, you need to make a chandelier for the nursery so that it creates a festive mood. And here you can find many interesting solutions. It can be oriental style, classic, Provence. The list of girlish preferences may include the most interesting wishes for the shape of the lamp - ponies, butterflies, fairies, cute little animals. A chandelier in a nursery can be decorated with bright bows, glass beads, and patterns. Girls will not mind pink, white and cream colors in their room. This means that the lamp will be in a similar color scheme.

avoid too heavy and complex structures in the nursery;
the lamp should give enough light, and soft and diffused;
to refuse obviously dark colors and artsy forms;
there should be no fragile materials;
undesirable with very bright highlights that tire the eyesight.

Important! Before you make a chandelier for a nursery, you should pay attention to the fact that it is easy to care for. If it becomes a dust collector, then the dust can cause allergies in a child.

Original ideas for different interior design options

There are many interesting ideas. Among them, there is sure to be exactly what is suitable for a particular interior:

For a classic style in a nursery, the lamp should be contrasting in color with light wallpaper, the color of the walls. You can make a hanging option. Five shades of different colors, which depict cartoon characters, floral ornament. Or it can be balls on long cords of bright colors.
For the style of an electrician, a lamp made of fragments of toys, a lampshade made of tin cans will look good. You can also make a lampshade out of cardboard and cocktail tubes glued to it.
For a marine style, a lamp in the form of a steering wheel, a ship with lights is perfect.
Oriental style involves the use of glass beads, light fabrics. You can decorate the lamp with beaded beads using an old frame from a former lamp. It will be great a ball-lampshade made of threads, decorated with beads, glass beads.
For a first-grader, you can make a lamp in the form of a hemisphere from a globe. As well as a lamp of five horns in the form of pencils.
For children of different genders, it is better to choose something neutral, but bright and cheerful. For example, a chandelier of three shades, decorated with multi-colored sharpened pencils, glued to the lampshade in a circle with a fan. Plafonds in the form of five multi-colored cubes with letters, suspended at different levels, will not look bad. Without a doubt - lampshades in the form of animals or cartoon characters, fairy tales. Children will also like balls of different colors. As well as spherical chandeliers made of threads.

Read also 4 simple steps how to change the chandelier on a stretch ceiling yourself

Girls will like a chandelier in the form of butterflies hanging on cords, fairies, if the room is designed in a fabulous style. And for boys, you can make a chandelier out of soccer balls for sports design.

What can a lamp be made of?

A lamp for a nursery can be made from materials that are safe and do not accumulate dust. It could be:

wood;
metal;
durable glass;
bottles and jars;
light fabrics;
threads;
wire;
plastic bottles, spoons and forks.

This is not a complete list of what can be used to create lamps in the nursery. The most unexpected things can come up, including a wicker basket, Lego figures, a tree branch, plastic cups. Even from the cups and saucers left from the service, you can assemble a lamp.

Required Tools

To create a chandelier for a nursery with your own hands, you need to prepare the tools:

scissors;
pliers;
jigsaw;
screwdriver;
drill.

The set of necessary tools may vary depending on the task of making a ceiling lamp.

5 ways to make creative chandeliers

Some options for lamps can be made by any parent without special skills. Let's talk about a few ideas that are suitable for girls, boys, as well as in a room where there are two children of different sexes.

Butterflies and flower

For this option you will need: cardboard, a pen, scissors, a tablet lamp, a jigsaw, plywood, white emulsion paint, plywood, wood varnish, a sponge and sandpaper - small and large. Step by step execution:

On paper, draw a flower of six petals. The middle of the flower should be smaller than the diameter of the lamp that is attached to the ceiling, as it will lie on the lamp.
Now you need to transfer the pattern to cardboard, circle it with a pen, carefully cut it out. And attach the cardboard to the plywood, cut the flower with a jigsaw.
Also cut butterflies out of plywood.
The edges of the parts must be rubbed with sandpaper - first large, then fine.
Sponge should cover the parts with emulsion paint.
Then you need to dilute the acrylic with emulsion paint and also cover the parts with a sponge, giving them color.
Dry and varnish.
Now, using a drill, you need to drill holes at the edge of the petals and butterflies. Connect the figures and the base of the lamp with a fishing line or strong thread.
Hang the ceiling from the ceiling, collecting the lamp.

Any color can be chosen. Yellow, red butterflies and a yellow flower look good.

Lamp made of plastic bottles

For him, you will need about 20 plastic bottles - only the necks from them, cut out to the shoulders. As well as silicone glue. We do it step by step:

You must first cut off the necks on the shoulders and chop each into strips of a centimeter.
Then bend the strips up, fixing with glue. Flowers are received.
We connect each flower with hot silicone, giving the product the shape of a ball. We leave only a hole for the cartridge with a light bulb.

Now it remains to thread a cartridge with a light bulb into the finished lampshade and hang it from the ceiling.

You need to collect a large number of corks from plastic bottles of different colors. And have silicone glue. Assembling the chandelier:

We glue each cork with the edges, forming a hemisphere or sphere.
We leave a hole for the cartridge with the lamp.
We pass a cartridge with a lamp into the hole. It remains to hang from the ceiling.

To give the children's room an original atmosphere and please the baby, you can build a lamp with your own hands. There are many options for how to make a children's lamp, the main thing is that it matches the style of the room and the preferences of the child. Then your work of art will make a splash not only among children, but also adults will not leave indifferent. Before starting work, you should familiarize yourself with some recommendations in order to properly make a lamp for a nursery with your own hands.

For the base of a pendant lamp or lampshade, it is best to take a finished lamp with a body, and then decorate it in different ways. Anything connected to electricity carries the risk of fire or electric shock. Therefore, you should not make a homemade lamp and install it, especially in a children's room. Such a device should be as reliable as possible. For the manufacture of the lampshade, only non-combustible materials should be selected, as well as non-toxic paints and adhesives should be used. To decorate the lamp, choose the most environmentally friendly raw materials without harmful fumes, as your child will breathe this.

High-quality lighting in the nursery is often provided not only through a ceiling lamp, but also through lampshades, pendant lamps and nightlights. It is better to use light bulbs or energy-saving or diode ones, since they do not heat up so much.

For the manufacture of a frame for a lampshade, rattan or wire is used, sometimes you can take a finished structure from under an old lamp. They finish it with children's toys, and a designer, and a variety of paper, and even recycled materials.

Do-it-yourself hanging or ceiling children's lamp can be made for any style of interior. For a children's room in a classic style, a lamp is suitable that will create a contrast with light or pastel colors of the wallpaper. But bold and unexpected solutions will fit into an eclectic-style nursery, for example, a ceiling lampshade made of tin cans with metal rings, a lamp with fragments of toys, a lace cap, etc. If you show your imagination, you can make a truly interesting, exclusive thing.

For children's lamps, stylized as oriental motifs, you will need beads, glass beads, colored light fabric. When such a lamp is turned on, the light from the lamp, penetrating through the colored glass, will be colored to match its color. Thanks to this, a magical atmosphere will reign in the children's room. It is quite easy to make such an accessory yourself, you just need to arbitrarily fasten the threads with colored beads. A few pendant beads made of beads and glass beads will look beautiful on such a ceiling lamp.

It is more difficult to make a children's lamp in the form of a stained-glass window, but you can use the simplest way: take a glass jar and apply a pattern on it with special paints or glue it with a colored film.

Consider the most interesting options for ceiling and pendant lights in the children's room, which you can do yourself.

Hanging lamp "Sun behind a cloud"

Lamp "Sun behind a cloud"

To make such a children's pendant lamp you will need:

two corner brackets;
bolts with nuts;
thin sheet of fiberboard;
socket for a light bulb with a wire and a plug for an outlet;
thermal gun;
paper for cutting the template;
jigsaw;
scissors;
White paint.

Draw a cloud template on a piece of paper and cut it out. Transfer the image to a sheet of fiberboard. Using a jigsaw, cut out a cloud of fiberboard and paint it with white paint. Attach two brackets to the back of the cloud: one for the cartridge, the other for attaching the suspension structure to the wall. Fix the cartridge and screw the light bulb into it. Attach the second bracket to the wall with dowels and hang the structure on it.

When you turn on the light bulb, such a pendant lamp will resemble the sun, partially covered by a cloud.

Ceiling children's chandelier from the globe

If your child loves to travel, he will love this children's globe chandelier. It can be made both from half of the globe, and from the whole. Consider how to make a children's chandelier from half a globe. To do this, prepare:

cartridge with a cord;
the globe;
quick-drying glue;
ribbon;
drill.

If you have a whole globe, cut it along the equator. Use a knife to cut off the strip connecting the two hemispheres together. Then begin to carefully separate them with a knife or a metal ruler. Take a half of the globe and attach it to the base of the cartridge, mark a hole on the surface of the globe of the appropriate diameter. If the globe is dense, drill a few holes around the perimeter of the hole, then it will be easier to cut through it. If the edges are not very neat, they should be trimmed or sanded with sandpaper.

It is advisable to decorate the edges of the globe with lace or ribbon, and paint the inside, then the ceiling chandelier will have a finished look.

Then they attach the lamp to a cord with a cartridge and hang it on the ceiling. They screw in a light bulb, and you get a very original ceiling chandelier for a children's room.

A hanging chandelier from a whole globe is different in that at the end you will need to glue both halves together. Such a lamp will give a very dim light and is suitable only as a night light.

hat lamp

A creative hat lamp with your own hands can be made quite quickly, it is perfect for a child's boy. For its manufacture you will need:

a hat, preferably a bowler hat or top hat;
cord with cartridge;
awl and scissors.

Using an awl and scissors, cut a hole in the hat for the cartridge. Thread the cord through the hole and screw in the bulb. Check that it is not too close to the surface of the hat. Now hang the lamp in the desired place. The result is an elegant and interesting lamp. If desired, the hat can be decorated with buttons, feathers or ribbons. Similarly, you can come up with a version of the lamp for the girl's children's room, just use a lady's hat for this.

Ceiling lamp made of lace napkins

You can decorate the girl's room and give it sophistication with the help of a beautiful lamp with lace. If you turn it on, then the shadows from the lace will look very interesting on the walls of the nursery and give the room a special atmosphere. To make such a ceiling chandelier you will need:

lace knitted napkins;
dense inflatable ball;
brush, wallpaper paste;
cord with cartridge;
a thread;
newspaper.

Inflate a balloon and spread the lace doilies on the newspaper. Thoroughly coat them with glue so that they get wet through. Hang the ball by a string and overlap the napkins on it so that their edges cling to each other. But do not forget to leave a hole for threading the cord with a cartridge. After the glue has dried, spread another layer to fix the result and leave the structure to dry overnight.

When the design is dry, deflate the ball and attach the lamp to the cartridge. If the hole turned out to be larger than necessary, then it can be reduced by hemming the holes with a thread to match the lace. Such a ceiling chandelier can be made together with a child, he can easily smear several napkins with glue. A little girl will be delighted with such an openwork chandelier, especially if she took part in its manufacture.

Tetrapack ceiling chandelier

To make a ceiling chandelier from tetrapacks, you will need:

scissors;
centimeter;
cartridge with cord and plug;
several tetrapacks;
fast drying adhesive.

Cut the tetra packs into strips 5 cm wide, arrange them into an interesting shape and glue them together. Don't forget to leave room for the cartridge. Decorate the elements with colored paints. When the whole structure is dry, thread the cartridge and hang it from the ceiling. A simple children's ceiling chandelier is ready.

Ceiling chandelier from the service

If you have a boring service or leftovers from a complete tea set, you can use them to create an interesting children's ceiling chandelier. You will need:

drill;
several cartridges with cords;
cups and saucers from the service.

Drill holes in the bottoms of cups and saucers through which you then need to thread the cords. It is better to make 2-3 compositions with one cup and saucer, but you can also dream up and make the design to your liking. If you like, you can make several of these ceiling lights in different places on the ceiling of the nursery, or connect them together to form one chandelier.

Knitting thread lampshade

This option will allow you to create both a ceiling chandelier and a pendant lamp on the wall. It depends on your wishes. Would need:

cartridge with a cord;
if it is supposed to make a pendant lamp, then two brackets are needed;
a couple of skeins of thread - depends on the size of the intended chandelier;
glue;
scissors;
balloon.

Blow up the balloon. Then randomly wrap it with threads and coat it with plenty of glue. After the structure dries, deflate the balloon. Hang the resulting lampshade for the nursery on the cartridge and screw in the light bulb.

To make a pendant lamp, attach a bracket to the wall, and screw another one with a bulb holder to it. Then screw the lamp and attach the resulting lampshade made of threads to the cartridge.

Bright ceiling lamp with pendant figures

To create a cheerful ceiling lamp for a nursery, you will need:

frosted ceiling lamp-tablet;
scissors, pen and cardboard;
jigsaw;
white water emulsion;
acrylic paints;
plywood for hanging figures;
sponge;
beautiful thread or fishing line;
emery;
wood varnish.

Measure the diameter of the pill lamp and draw a beautiful flower according to its size. The flower should have a center. Transfer the flower to cardboard. Cut out and attach to the lamp. If everything suits, we do the same with pictures of butterflies.

Transfer the cardboard templates of the flower and butterflies to plywood and cut out the elements. All irregularities and notches should be cleaned with sandpaper. Then prime the figures with water-based white paint with a sponge and lay to dry.

Apply paint to the lamp with light dotted movements. After everything is dry, take acrylic paints and add some water-based emulsion to them. Now start painting the hanging figurines. To keep them bright for a long time, it is recommended to cover them with wood varnish after the paint has dried.

Drill small holes in the center of the flower and between the wings of the butterflies. Take a fishing line or thread and put all this beauty on it, attach it to the lamp. A bright children's lamp made by hand is ready.

In the children's room, in addition to the main lighting, there should also be additional lighting. At night, you can use a not very bright night light that will not wake your baby and allow you to move around the room calmly. And some babies can't sleep without light. In any case, a night light or a lamp in a child's room is an irreplaceable thing.

In this article we will tell you how to make an original lamp in the children's room with your own hands.

Materials and tools for making a lamp:

small sheet of thin fiberboard
two metal brackets
chuck with cable and plug
several bolts and nuts
chuck mounting bracket
thermal gun
template paper
scissors
jigsaw
white non-toxic paint

How to make a children's wall lamp with your own hands

Draw a cloud on a large piece of paper.

Transfer the image using a template to a sheet of fiberboard.

Saw along the markings with a jigsaw or cut with a sharp knife.

Paint the cloud white.

Glue two brackets to the rear surface of the cloud, one for fixing the cartridge, and the second for mounting on the wall.

Fix the socket with the cable, screw in the light bulb.

Note: in the nursery, it is better to use LED lamps, as they do not heat up during prolonged use.

Fix another bracket on the wall using anchors or self-tapping screws. Hang a cloud on it.

Connect the lamp to the network.

A bright spot of light will appear on the wall, resembling the sun. And our cloud closes it a little so that it does not shine so much into the baby's eyes.

Original article in English.

In the design of a children's bedroom, many elements are of particular importance. And you need to approach the design of the nursery creatively, but not forgetting that here the child not only has fun, but also sleeps and does his homework. A special element to which you need to pay increased attention is the lighting of the room. The main source of lighting, of course, should be. A chandelier in the nursery with your own hands , can be a playful element of decor and cheer up your child.

Since the lighting from the chandelier should not be bright, no matter what irritates the delicate children's eyesight. Therefore, with its design, you can dream up. Most importantly, no matter how beautiful it turns out in the end, it should be in harmony with the overall design decision of the nursery. In order to get a cheerful chandelier in the nursery with your own hands , You can use whatever you have on hand.

First of all, it is worth saying that the base with a mount and a cartridge can be taken from a finished chandelier. The next thing you may need is hoops, three pieces of different diameters. They can be painted with spray paint in the color that you need. Then, with the help of a fishing line, fasten them to the base of the chandelier. From org. glass or colored plastic cut out figures of butterflies, dragonflies, ladybugs. All figures, if necessary, can be painted with the same colors. Then make small holes in each and tie them to the threads. Tie each thread with a figure to the hoop.

Thus, you can also tie glass droplets of different colors, which you can buy at the store for small items for decoration. Large bright beads, or decorative rose petals. Anything that is enough for your imagination. Places where threads were tied to the base also need to be decorated in order to give the chandelier a finished look and a special charm. To do this, you can take large rhinestones or imitation gems, which are well glued to the glue. And end the process. The chandelier is ready, and your child is happy. Read also about: description, styles, creativity.

Now he will have something to look at on the walls before going to bed, because the glass tends to reflect light and bright colored highlights will spread around the room. Just remember that there must be a table lamp on the desktop so that the child can do homework without straining his eyesight. Because such a chandelier is very tiring for children's eyes, and in the bedroom it will perform more of a decorative function.