The most economical ways to autonomously heat a private home. What is cheaper to heat a private house? All types of home heating are economical

Most have an impressive area and due to the fact that Russia is a non-resort country in which all year round summer reigns, this very area needs to be heated somehow winter period. There is a whole arsenal of variety for these purposes, but due to the large volumes, many options are very expensive. If you approach this issue correctly, it turns out that electricity is the most economical way.

Read in the article

Types of electric heating of a private house

Heating using electricity can be divided into several categories: spot, general, combined. Below, the types and principles of operation of electrical appliances of this type are described in detail.

Spot heating using heaters

The domestic market can offer huge assortment in the segment. The pricing policy will allow you to choose both economy class models and premium units. To avoid confusion among the options, they are divided into subgroups:

. Based on the operation of needle or x-shaped heating elements.

The body of these devices is mainly made of stainless steel, but there are models that are made of glass or stone. The geometry of the box assumes the presence of holes for air intake at the bottom and a grille for the release of hot flow at the top.

Such devices are equipped with all kinds of regulators. Which provides complete protection against overheating, tipping, short circuits etc. Some copies have additional privileges: electronic control, touch display, remote control, moisture protection, dust protection, etc.

Installation can be done on walls or using wheels.

Heat fans. Very convenient and easy to use, small in size and light in weight. The standard power that most fan heaters have is 2 kW, which is quite enough to heat small room in just 10 minutes.

The device operates thanks to a fan that drives air onto a heated coil, which in turn heats the flow and transfers it to the room. Such devices have a number of disadvantages, such as: they heat while it blows, and they consume a lot of electricity.

In stores you can find devices with additions in the form of an ionizer, sleep timer, etc. This type of electric heating is the most economical without.

. They have a lot of advantages, which ensures comfort during their operation. The excellent directed heat transfer generated by the infrared emitter can fully warm you not only indoors, but also outdoors.

The design is a concave aluminum reflector with a special heat-repellent coating, which concentrates and directs all thermal energy in a certain direction. There are models that have a moving base, which provides heating at 90, 180 or 360 degrees.

Oil heaters. An old acquaintance who managed to warm more than one generation of families. Its ability to heat up to over 100 degrees while using a reasonable amount of energy has won many fans. The mineral oil that is inside the heater does not expand when heated strongly by the heating element, which increases the operating temperature.

Description of popular models and heating systems

To fully determine the most profitable models, you need to analyze a whole ton of material about characteristics and performance indicators. Of course, it is present on the Internet large number TOPs describing the most popular heater models in their segment (here is one of best TOP 10 electric heaters), but in reality the choice can be limited. This is done according to the following criteria:

Required power;
Installation method;
Safety protection class;
Necessary additional functions;
Case dimensions;
Design;
Budget size for purchase;

By making a list, you can easily choose the appropriate option.

Review of electric boilers for heating private houses: prices for the most popular models

Here is a list of the most popular manufacturers that have distinguished themselves by their excellent quality and excellent characteristics. Heating in a private house with an electric boiler (cost in the table below) is considered an alternative in the absence of a gas main.

Electric boiler table

Image	Manufacturer	Number of circuits		Power, kW	Area, m2	Price, rub.
	EVAN-S1-3	one		3	25	7 500
	RUSNIT 204	one		4	30	9 600
	Ferroli Zews 6	two		6	60	29 500
	Protherm SKAT 9KR	two		9	90	31 000
	Wespe Heizung WH. Foreman 8	one		8	80	15 000
	Zota - Economy 7.5	one		7.5	70	10 000
	Vaillant eloBLOCK VE 6		two	6	65	33 000

Heating the house with electricity. The most economical way for you

All explanations about savings will be discussed using an example that has an area of 100 m2.

What happened in the end? The total cost without solar panels is 70,000 rubles. Power consumption is 14 kW/hour, per day of operation of two boilers at an outside temperature of -10, consumption will be about 90 kW/day. The cost of a kilowatt of light is 5.38 rubles, which means 90×5.38×30=14526 rubles per month. If we count with installed solar panels, then the amount of expenses will become 11,500 rubles.

This is one of hundreds of options, it's up to you to choose.

Note! To understand how to heat a house economically with electricity, you need to know some tricks. One of them is the installation of a three-tariff meter.

Review of the latest solutions in electric heating systems

It can be immediately noted that all the latest developments are very expensive, but they have a good tendency, they quickly pay for themselves.

Solar collectors, which heat the water. Such panels are placed on the roofs of houses with sunny side. They show themselves very effectively in sunny regions. They have a fairly high efficiency and maximum level of environmental friendliness. The downside is that it cannot be used at night. In most cases they are installed as .

Gelosystems. Heat pumps, which suck heat from environment(air, earth and water), and transfer it to the coolant. An excellent heating option, but very expensive at the initial stage. The equipment takes up a lot of space. Payback period from 2 years.

Electrode boilers, intended for (owner reviews and approximate prices are available on many forums and websites). A small device in the form of a pipe heats water by passing it through itself. The coolant must contain salt. The charged particles accelerate to enormous speeds inside the pipe and heat the water with their friction. Very efficient technology. A negative nuance is the discrepancy between the power and the heating area declared by the manufacturer.

Conclusions

Heating a house with electricity is the most economical way only if you approach it wisely. By investing more money when installing the units, you will save a tidy sum in the future. Moreover, in the current world, where the level of pollution is off the charts, the use of environmentally friendly technologies is very important point both for you and for future generations. Remember this.

Before starting the article, it is worth noting that the most effective at the moment is considered to be gas system heating. But if for some reason it is not possible to install a gas boiler (for example, there is no gas line at the dacha), it is worth paying attention to such an option as economical heating of a private house with electricity, using one or another heating arrangement.

Sale and installation of infrared heating systems "Zebra" for private homes, offices and social facilities at prices from the manufacturer's website on the website

Alternatively, electricity is a safer solution and no additional permits are required for the installation of this equipment. In addition, you can easily make electric heating for a private house with your own hands. The disadvantages include, perhaps, high electricity bills.

It should be noted that electric heating, made independently or factory-made, is the most reliable, environmentally friendly and comfortable way to heat a home. This equipment does not require maintenance, is easily adjusted and can be automated, so it is much easier and safer to heat a house with electricity. The design does not include elements that quickly fail. There is no need to constantly monitor the fuel level and sensors.

Moreover, electric heating of a private house has the following advantages:

Ease and simplicity of installation. Installation does not require special qualifications or expensive tools. The equipment itself is quite small in size and does not require much effort to install. All devices are quite easy to transport. This equipment does not require a separate boiler room or chimney.
Safety. The electric heating system does not emit combustion products or carbon monoxide. Even during disassembly or breakdown, no harmful substances are released.
Low initial investment. There is no need to make any special permitting documents, prepare a project and invite special services that will give the go-ahead for installation.
Reliability and noiselessness. Electric heating does not require regular checks at specialized services. During operation, the equipment does not produce any noise due to the absence of elements such as a fan and circulation pump in the system.
High level of efficiency. Even during severe frosts it heats the house quickly enough. Electric heating must be equipped with a special system that allows you to regulate the temperature in each room separately. This makes it possible to significantly save money during the heating season.

A significant disadvantage of this equipment is its high power consumption. Electricity prices in some areas are quite high, and this option for heating your home may not be profitable.

Another significant disadvantage is energy dependence. Heating a room is simply impossible if the electricity is turned off.

The disadvantages also include unstable voltage in the electrical network; this problem is especially acute in rural areas. To resolve this, it is recommended to purchase your own generator, but this will entail additional waste of money.

If you nevertheless decide to economically heat a private house without using gas, that is, to use electric heating, then you will need to take into account the general condition and power of the electrical wiring. A large private house will require a three-phase network for such purposes. It will be necessary to clarify the allocated power to the house, and how much of this power can be allocated for heating.

Types of electric heating systems and their features

Any electrical system heating a private house can be built according to two principles:

Direct. Each room is heated by devices that are powered directly from the network.
Indirect. This principle uses a coolant that heats radiators installed in rooms.

There are quite a large number of opinions about what electric heating is for a private home. the best option. Most adherents of the indirect method of heating a house cite as their main argument the long cooling process in the system, which provides sufficient advantages when the boiler is stopped. Others, supporters of direct heating, talk about lower costs during the purchase and installation of equipment.

Let's consider a variety of electric heating systems in order of increasing cost of investment:

fan heaters and convectors;
heating with infrared radiation;
electric baseboard heaters;
heated floors of cable and film type;
standard water system equipped with electric boiler and radiators.

Installation of wall-mounted electric convectors is carried out in those areas where water heating radiators are usually installed - near cold walls and under windows. Fan heaters usually have forced air injection and a mobile design. They can be placed in the most convenient places. This type of electric heating is the cheapest, but at the same time less efficient.

A heating system based on infrared radiation equipment is more efficient. These devices, attached to the ceiling, heat all surfaces, from which the air is subsequently heated. Baseboard convection heaters, which are located around the perimeter of the room, have proven to be quite effective. But such a structure will require additional costs due to the fact that it will need to be installed instead of baseboards.

Such a proven method of electric heating as underfloor heating is very popular. This method basically uses heating film, electrical cable mats or a heating cable, which are capable of heating a fairly large room. The structure itself is quite inexpensive, but installation under a screed or coating can cause serious blow according to your budget. This heating method is the most economical; moreover, it gives pleasant warmth and creates a feeling of comfort.

All of the above methods have a significant disadvantage; they can only work if electricity is available. If the cost of electricity increases, it becomes possible to install natural gas into the house, or for some reason you need to change the energy carrier, the previous equipment may be useless.

To prevent such a misunderstanding, it is recommended to install an electric boiler and a standard water system with radiators for heating. If you want to change the energy source, you will only need to spend money on a new heat source.

IN small apartment ideal option There will be cable heated floors, their level of comfort is beyond praise. Cheaper methods also have a right to exist. But in stronger cold weather, their capabilities may not be enough and the rooms will be cooler.

In a large apartment, the best option would be to install radiator autonomous electric heating or warm water floors.

It would be much more difficult to choose the best option if it were not for the price of energy. But apartment owners also face the problem of a limited consumption limit (about 3-5 kW).

It is recommended to think about this in advance as soon as you plan to organize electric heating for your apartment. It is necessary to carefully study the contract for the supply of electricity, which specifies this limit; this contract may also stipulate that heating a home using electricity is prohibited.

It is somewhat easier to organize electric heating in a private house than in an apartment. The power consumption limit is much higher; it is possible to check the wiring and, if necessary, put it in order, starting with the power line. From the list above, for the owner of the cottage, the most successful option would be water system heating with electric boiler.

This is quite easy to explain: it is necessary to ensure the use of various energy sources, and not just electricity. Based on this, you will need to select a boiler, mount it and assemble one- or two-pipe system.

Design characteristics of electric boilers

Modern boilers operate on three principles of heating the coolant:

heating elements;
electrodes;
based on magnetic induction.

The first option is the most common. The coolant from the system enters the boiler, where it is heated using tubular heating elements and flows back into the heating system. This type of equipment is safe, functional, and also has built-in automation that controls the temperature of the room air and coolant.

Electrode boilers operate on a completely different principle. IN this device The heating element consists of a pair of electrodes to which high voltage is applied. The coolant heats up due to the fact that electric current moves through it from one electrode to another, after which the coolant enters the heating system.

Important! In boilers of this type, there is no electrolysis process (which is why there is no appearance of scale) due to the use of alternating voltage with a frequency of at least 50 Hz.

The intensity of use affects the heating ability of the electrodes, as over time they become thinner and no longer heat the house as much as needed. In electrode boilers, replacing electrodes is a standard procedure.

The design of induction boilers is more complex, although they are structurally more attractive. This type of boiler does not have the heating elements that we are used to. The heat exchanger, which is part of the magnetic circuit, using a powerful magnetic field heats the coolant passing through it into the heating system.

Electric heating country house, in the form of indirect heat transfer, has serious advantages over gas and air heating: electric water boilers are quite reliable, do not require a chimney and have high efficiency. The disadvantages of these devices probably include the requirements for a stable voltage on the network, as well as the presence of good wiring.

Water installation heating system with an electric boiler requires serious initial investment, especially if a third-party organization is involved in this, which will be involved in the project of installing, configuring and balancing the system. It is also worth allocating additional money from the budget for the maintenance of this heating system, which includes checking the operation of the valves, periodically flushing the radiators, etc.

How to save energy?

Stick to it the following tips in order to make electric heating in a private home more economical:

use multi-tariff electricity metering, since at night the tariff is much lower than during the day;
use non-electric heat sources during business hours;
install thermostats in the rooms;
give preference to underfloor heating systems;
traditional advice: try to insulate the house as much as possible or external wall apartments.

There is no need to neglect automation tools that can help reduce the temperature in unused rooms. And in general, you should not reject any means that will help you reduce energy costs.

Create a project optimal system electric heating. For example, a small one-room apartment can heat an electric boiler (provided that the heat loss is quite small). But in the house with a large number rooms, he may no longer be able to fully cope with the task.

In this situation, the best option would be to install a convector system with thermostats that will control the climate in each room. Infrared panels are the optimal solution for outbuildings where there is no need to maintain a constant temperature.

Thus, we reviewed all the popular methods of electric heating and concluded that heating a house with electricity is not only the most economical method, but also the safest. Each method has a fairly large list of advantages - environmental friendliness, no need for a fuel supply, noiselessness and ease of operation. But given the cost of electricity, don't count on any economic benefits. Therefore, it is recommended to insulate your home as much as possible to reduce heat loss.

It is realistic to provide cheap and effective system heating. The electric convector is built on the principle of natural air circulation. Warm air moves upward from the heater, thus stimulating the movement of air inside the room and ensuring uniform heating. However, a convector is effective only in warm climates, when the temperature does not fall below 10-15 degrees.

Pros

No forced air blowing. Even in clean house there are solid particles that lie on surfaces. With artificial blowing warm air from the heater, this dust becomes part of the air we breathe. Natural air circulation is not so active, so dust does not rise into the air.
Small size with sufficient power. The heating elements of convectors heat up quickly, converting electricity into heat with an efficiency of up to 80%. In addition, there is a system for working on different modes, as well as thermostats that allow operation not constantly, but only when the air temperature drops.
Mobility, allowing you to move the convector around the room, to places with maximum cold flow.
The possibility of creating a heating system exclusively using convectors or using them as an integral part of more complex system heating
The electric heating element does not heat up more than 100 degrees, and the body - 60 degrees. Have increased level protection from moisture, which allows you to use the convector in the kitchen and bathrooms.

Cons

The disadvantage of electric convectors is the installation of heaters in every room of the house.
In addition, if you turn them on at the same time, there is a possibility of exceeding the permissible power limits.

However, the disadvantages can be turned into advantages by installing a relay for turning on the heaters one by one. The relay will allow you to create a stable temperature in the house, reduce energy costs and remain within the permissible power limits. There is another argument in favor of a system of convectors - they will not all fail at once. Replacing one or two appliances without losing heat is not difficult.

The photo shows an electric convector from Nobo, Norway

Method 2 - tubular electric heaters

Transfers heat from a tubular electric heater to the coolant to liquid basis. Typically, water and oil are used as a coolant, sometimes antifreeze. The principle of the heaters is the same as electric kettles, which is why they are also called heaters and oil radiators. In fact, it is a boiler placed in a vessel with water. The efficiency of such devices is quite high, and heat loss for heating is minimal.

Pros

The undoubted advantages of tubular heaters include their safety, operational reliability and versatility of use.
Can be used in both gaseous and liquid media.
Not explosive, and not afraid of vibrations and shocks.
Tubular heaters are available in a variety of design solutions, which allows for economical heating private house electricity without disturbing the aesthetics of the interior.

Cons

Heating heating elements have a high cost due to expensive metals which are used in production. Since scale forms on the tubes, it is necessary.

A tubular radiator is a thin-walled metal tube with a spiral inside, so if you do not need particularly high temperatures, then you need to take a heater with carbon steel tubes. If the device must output stably high temperature or work in an aggressive environment, then you need to take a stainless steel device.

The photo shows a tubular electric heater made by yourself

Method 3 - heated floor

As the only source of heating, they are chosen to free usable area, i.e. arrange heating without using radiators. In addition, uniform distribution of heat in the room helps reduce dust in the air. I recommend buying electric floors in the form of heating mats - this will greatly simplify installation.

Method 4 - electric boiler with heating element

Their popularity is determined by their safety, low cost and reliability. Most consumers opt for heating element boilers - they are much cheaper than electrode and induction boilers, and they are easy to maintain.

However, due to the use of a thermoelectric heater (TEH), such heating cannot be called the most economical. In addition, before purchasing, I recommend checking the operating mode of the local electrical networks - perhaps the networks will not cope with the load you need and the purchase will be in vain.

The photo shows an electric boiler KOSPEL, Poland

Method 5 - induction boiler

This is a transformer with two types of winding. The resulting eddy currents follow a short-circuited loop, which is the boiler body. The secondary winding receives energy, which is converted into heat, which heats the coolant.

Induction boilers heat your home quickly, can operate at low voltage, and have no parts that can fail. The efficiency of such a boiler is almost 100% and does not depend on the service life.

The photo shows an induction boiler EPO Evan 9.5 kW, Russia

Method 6 - electrode boiler

Inside there are electrodes that act as a heating element. When current passes through a liquid, heat is generated. This means that in electrode boilers there is no actual heating element on which scale could form. The absence of scale will greatly facilitate operation.

Electrode boilers are highly reliable and operate much longer than tubular heaters. In addition, they have small sizes, which is very convenient for a small residential building. The disadvantages include high demands to the liquid used as a coolant. Water must undergo special treatment. Often, antifreeze generally must be exclusive - from the device developer.

The photo shows an electrode boiler Galan, Russia

Method 7 - infrared heaters (the most economical)

Infrared heaters are considered the most economical of all types of electric heaters. They do not need heating elements and water pipes. Infrared heaters heat objects, not the room. Then the heated objects heat up the air. If an electric boiler can be compared to a kettle, then an infrared boiler can be compared to a microwave oven.

Infrared panels are especially popular. They are installed on the ceiling or walls of residential and industrial premises. Since the heating area is increased, the room becomes warmer faster than usual. Such a panel can be used as an independent heating source or as an addition to an existing system. An infrared heater goes well with electrode boilers. For example, an infrared heater can only be turned on in spring and autumn, when it is too early to turn on the main heating, or when it suddenly gets cold outside.

Pictured is a GROHE infrared panel, Germany

Conclusions

It is generally accepted that heating a house with electricity is not cheap. This is certainly true if we mean only payment according to tariffs. However, to the price of heating you need to add the cost of the equipment, as well as the costs of its maintenance and repair.
If you compare bills for electricity, firewood, coal, pipes, boilers and other equipment, you can come to the conclusion that private heating with electricity is cheaper than stoves and other heating alternatives gas systems.
In addition to money, there is another argument in favor of electric heating - it saves time: turn it on, leave and forget. The only downside is a sudden power outage.

Below watch the video about how we managed to do it cheap heating electricity of a large private house.

Modern technologies offer many options for heating suburban housing: from ultra-modern and thermal pumps. The cheapest fuel is considered to be network gas, but it is not always possible to connect a country house. Prices and options alternative types fuel, features of new systems - in this material.

Read in the article

Alternative and traditional heating of a country house (prices and options)

Let's consider the main types of fuel that can be used to heat private households in our latitudes:

and coal;
fuel oil, diesel, gasoline, ;
network and bottled gas;
electricity (network, );
geothermal energy.

Each of the listed types has its pros and cons. When choosing a type, it is important to take into account the family’s financial capabilities to purchase and operate the system, the availability of fuel and the possibility of combining different types of fuel.

Saving on qualified technicians can result in system problems. That is why it is important to think through everything to the smallest detail, draw up a project competently and entrust the work to professionals.

What is a heating system project?

For design, the area of heated premises, power and probable heat loss are taken into account. The number in each room and the length are calculated. Quantity and character also matter.

Detailed calculations allow you to optimally spend funds and further minimize system maintenance costs. You can turn on the water heating.

When designing a system, it is necessary to take into account the climatic characteristics of the region. For example, in the conditions of the far north, a liquid fuel boiler will be ineffective, since its fuel loses its ability to ignite at minus thirty degrees.

Which heating is better for a private home: comparing different types

So, before installing, you should know:

is it possible to connect to the network gas pipeline;
what fuel is most available where you live;
Is there enough power in the local power grids for connection;
how much thermal energy is required to heat the house.

Solid fuel and its features

The use of solid fuel materials, coal and, is considered an obsolete type of heating. Although, one can argue with this statement. In a situation where housing is inaccessible to road transport location, this type of fuel – without alternative option. The power line may not meet the required loads, there is no network gas pipeline, and bottled or liquid fuel is difficult to deliver. So it remains proven over centuries. Although it does not heat automatically, it guarantees warmth in the most severe frosts.

For your information! The costs of heating with solid fuel are one and a half times less than the costs of heating with a gas installation.

Advice! When considering electric heating of a country house, options and prices for devices, pay attention to one of the most aesthetic and modern types of system - heating baseboard. It will not interfere with the arrangement of furniture and will heat the room as efficiently as conventional radiators.

Related article:

What is this latest system heating? Price, reviews from system owners, review the best manufacturers, recommendations from professionals self-installation- in this material.

Network gas, cylinders and gas holders

Network gas is available to 67 percent of the population of our country. Where there are gas mains, other types of heating systems have not been used for a long time. Cheap blue fuel does not require the creation of storage facilities, storage for future use or constant monitoring of heating device. The cost is relatively low and starts from 20 thousand rubles.

If for some reason network gas is not available, alternative options can be used. You can connect several cylinders to the boiler or install a system with spacious storage liquefied gas. The container is filled with special machines. These alternative options are completely autonomous and depend only on the ability to refuel the tanks. Such gas will cost a little more than network gas.

Advantages and disadvantages of gas heating

For your information! Gas heating- the most environmentally friendly way to heat your home. With a gas boiler, there will be no foreign smell, burning or soot in the room.

Geothermal heating as an alternative option

Article

The specified components of the structure are too important. That is why it is important to select all installation parts technically competently. The heating design of the apartment includes various devices. Heating installation includes batteries, air vents, expansion tank, fasteners, boiler pipes, pressure-increasing pumps, thermostats, manifolds, connection system. On this page of the site we will try to select certain parts of the system for your garage.

Having chosen once favorable heating for your home outside the city, you can sleep peacefully like a baby, knowing that nothing will happen to your warmth. The heating network will work and heat your home the way you want it, no matter what the mood of the utility services today.

Choose the most profitable heating difficult, but possible. It’s difficult for the simple reason that the range presented today is very wide. But the specialists of our engineering company “Savard” are always ready to come to your aid and help you find optimal solution. Do not forget that only companies with the necessary licenses have the right to install such communications.

The most profitable heating for private, country houses

By the way, profitable home heating can be installed when you decide on the heating method. The fact is that there are two methods. One of them - single-pipe - is suitable for small buildings. While for large or two- or three-story cottages the two-pipe method is preferable, since mixing does not occur in it hot water and coolant.

Owners of private country cottages Those who managed to install a heating system using water in their homes unanimously claim that such heating is very comfortable. After all, the heating is excellent, the system is safe, the air is clean, dust-free and not dry.

The boiler acts as a heating element for the system. The boiler is running natural gas or oil. Water enters the boiler using a special pump, which also supplies water to the radiators and radiators. It should be noted that the pump operates almost silently, which, you see, is very convenient.

Which heating is profitable and why?

After installing the heating system, it is necessary to carry out pressure testing. For this you need a pressure testing pump. There are different types pumps For a private home, a manual one is quite suitable.

Crimping is needed not only for heating system pipes, but also for sewer pipes. By the way, the sewerage scheme in a private house is simple. It's quite easy to build. Read about the sewerage system in a private house in this article.

Characteristics of a heating boiler for a private home

The power of the heat generator is selected depending on the volume of the room. For a house with dimensions up to 400 m2, a boiler with a capacity of 42 kW is sufficient. For large areas, including guest houses, country panel houses. garages, bathhouses and greenhouses, a high-performance unit or an economical cascade system is required. It consists of several boilers connected to each other alternately. The thermal mode is supported by automation, turning the units on or off if necessary.

Fuel boilers are available in two types: floor-mounted and wall-mounted. Floor-mounted ones are more expensive, but more reliable and durable.

Types of double-circuit boilers, depending on power:

Flow type. Used when hot water consumption is minimal
With integrated boiler. This system is designed for a full-fledged domestic hot water supply in a country house.
Specialized solutions: for heating water in a swimming pool, installing saunas and Jacuzzis

IN domestic boilers an atmospheric burner is installed. Combustion products are removed through the chimney, naturally or with the help of a fan.

Steel
Galvanized
Stainless
Copper
Polymer

It is prohibited to gasify basements and basements
It is necessary to provide free access to the tank from all sides
Do not expose the gas container to heat or direct sunlight.
It is not allowed to operate tanks with damaged housings or corrosion.
The distance from the cylinder to the boiler must be at least 1 m

For a continuous supply of fuel, it is best to install several cylinders. They are connected via a special ramp with flexible liner, gas pressure measurement sensor and safety valve. If the cylinder heats up, the valve releases excess gas, thereby reducing the pressure inside the cylinder.

The costs of maintaining a home for private homeowners are already quite high. That is why the question of what is cheaper to heat a house is so popular, the answer to which will save your budget.

Why is it profitable to heat your home yourself?

To do this, you need to understand how the system works. So, there must be a boiler with the function of heating water, which then goes through pipes and enters the heating radiators. After some time, the water cools down and goes back to the boiler, where it is heated again. This system works in a vicious circle. In some cases, you cannot do without a special pump when supplying liquid on a forced basis.

Many people are interested in what is more economical to heat a house with a water heating system, because it is known that heating equipment can operate on various energy sources. That is why equipment is usually divided into:

When answering the question of how to heat a house economically, it is worth focusing on gas and solid fuel boilers, since the cost of “fuel” in this case is quite acceptable. Electric boilers can be quite expensive due to the cost of electricity.

Using heaters for heating

Modern heaters are very efficient and safe method heating rooms. Especially if people live in the house not all the time, but several seasons a year. The most advantageous option is to use oil radiators, which store heat for a long time and consume a small amount of energy.

Thus, to determine which type of heating is best for you, you must first study all the available options, weighing their advantages and disadvantages, the economic costs of installation and operation. Don’t forget to choose a heating option based on the time you spend in the country house. After all, if you live at the dacha only in the summer, a fireplace with a stove will be enough, but if you live there in the winter, without quality system heating is indispensable.