The most economical home heating system is electric. We save on heating a private house. Home heating system with natural circulation

The most economical heating for a private house is the use of a gas system. However, not everyone has the opportunity to use it, for example, if there is no highway nearby. In such a situation, you need to heat the room in another way. The most profitable option can be selected if you analyze all possible methods and take into account the advantages and disadvantages of specific options.

Show all
Choice of inexpensive heating
Before choosing the best option for economical home heating, you need to consider several factors. The following points need to be analyzed:
Heating in a private house, a super-new feature!!

Fuel types
The most economical home heating implies a minimum consumption of heat carriers, so you need to understand which fuel will be the most affordable. This factor is calculated based on two indicators:
1. 1. Fuel price.
2. 2. Possibility of uninterrupted energy supply.
The second factor is the most preferred. If the owner finds himself in a situation where the necessary fuel cannot be obtained, it will not be easy to get out of the situation. The most popular types of coolants are:
Before you purchase a boiler, you need to take into account the value of the calorific value of different types of coolants. The quality of energy release during combustion depends on this criterion. Ranking of the most efficient fuel in descending order:
1. 1. Electricity.
2. 2. Liquefied and natural gas.
3. 3. Heat carriers in liquid form.
4. 4. Stone variety of coal.
5. 5. Fuel braces and firewood.
Prices for these types of coolants vary in each region. If we take average data as a basis, gas still remains, coal, pellets and firewood will cost 2 times more. Liquid heat carriers cost several times more than gas, and electricity is the most expensive type of heating.
It is impossible to say for sure which type of fuel is most beneficial to use for. This is influenced by many individual factors. On average, the following fuel rating will be appropriate, presented as the price increases:
1. 1. Natural gas.
2. 2. Various types of coal.
3. 3. Firewood.
4. 4. Pellets.
5. 5. Liquefied gas.
6. 6. Liquid types of energy carriers.
7. 7. Electricity.
Cheap heating in a private house. Personal experience
Once the preferred type of fuel has been selected, you can proceed to the next step. Now you need to decide which heating in a private house is the most economical: water, air or electric.

Electric heating
There are several ways to heat a house with electricity. The following types of such heating can be distinguished:
If we talk about electric heating in general, we can highlight a lot of advantages of this method. The benefits are:
- Ease of installation.
- Silent operation.
- Lack of dryness in the air.
- Easy service.
- The ability to quickly and easily adjust the temperature in a separate room.
How to heat a private house without gas? But! Comfortable. Comfortable. And low cost.
However, any type of heating has its drawbacks. The disadvantages of electric heating include:
- Expensive operation due to high energy costs. This method is more preferable for a city apartment.
- The probability of being left without heating in case of an unexpected power outage.
Water heating
The scheme of operation of water heating is as follows: water is heated in the boiler, after which it moves through the laid pipes and transfers its thermal energy to the radiators, and then returns to the boiler. This method can be divided into three types according to the type of circulation.
In natural circulation, the coolant moves due to the difference in density between warm and cold water. Warm temperature water is lighter than cold water, so it is displaced and enters the upper region of the heating network. Further, it is smoothly cooled, after which it begins to circulate to the lower region of the system and heats the space in the radiators, and then goes back to the boiler. This scheme is very economical due to the following factors:
- It is completely independent of electricity, no pressure pump is required for circulation.
- The system is durable because it contains a minimum number of parts that can break.
However, this method has significant drawbacks. It is important to pay attention to such factors:
- With the help of natural circulation, it is impossible to heat a large house with an area of \u200b\u200b100 square meters or more. Water will not circulate due to the high hydrodynamic resistance of long networks.
- The boiler must be on all the time.
- Regulating the temperature in individual rooms will not be easy.
Systems with forced circulation differ significantly from the first type of water heating. The pump can be located in the boiler itself or be built separately. There are such advantages of this method:
- For installation, house pipes of a smaller size will be needed than with the gravity method.
- Thanks to the pump, the heating efficiency will increase by 30 percent. This type of work allows you to heat even a large two-story house.
- You can easily adjust the temperature in each room.
Cheap heating for a private house
This method is very popular. However, the following features must be taken into account:
- To operate the circulation pump, electricity is required.
- The system will not work if there is a power outage. This disadvantage can be compensated by using additional energy sources, for example, a generator or a special battery with constant power.
Combined circulation systems are very similar to self-flowing systems. The difference is that the former have a circulation pump that pumps the energy carrier. If the electricity fails, the system will function without it, although the performance factor will decrease. However, the house will always be warm. This method of heating has the same advantages and disadvantages as the two previous methods, depending on the operating mode.
The advantage of all water systems is a huge selection of boilers that can be connected to them. The disadvantages include difficulties in installation compared to other methods of heat supply. This method certainly refers to the cheap heating of a private house, but it is extremely difficult to do it with your own hands.

air heating
With this method, air is heated in a heat exchanger or air heater, after which it passes through the built-in channels and is distributed throughout all rooms. Each room should have several holes through which air will enter the room. The main advantages of such a system:
- The method allows you to heat the premises very quickly.
- The efficiency is at least 90 percent.
- Heat supply channels do not need off-season maintenance, which means that you can save a lot.
However, it also has several disadvantages. It must be remembered that:
- Such a system cannot function silently. For those who value silence, this option is not suitable.
- In order to complete the installation, a large area is required.
Ways to save more
Maximum savings can be achieved if a certain thermal regime is observed. Even during the design of a private house, the owner should take into account the fact that rooms that border on external walls are more susceptible to cooling in the winter season than those that are closer to the central part of the house.
Use of seals
Being engaged in installation, one should not forget about the effective insulation of a private house. Even the highest quality heating will not give any result if all the heat is blown out of the room. If there are no drafts in the house, non-insulated walls still cool the air currents. Cold floors also negate all the efforts of the owner. In addition, you need to consider the quality of doors and double-glazed windows.

If the house is effectively insulated, it will take half as much money to heat it than in the opposite case. With this in mind, it is still necessary, when planning a house, to select materials that have maximum heat-insulating functions. However, even an already built private house can be very well insulated. There are many coolants with low thermal conductivity. Old proven materials - glass wool and foam. Of the new ones, you can stop at the following varieties:
Styrofoam.
Extruded polystyrene foam.
Polyurethane foam.

Each material has its own advantages, disadvantages and features of use. Sellers of building materials are very well aware of this and will always be able to recommend which sealant is suitable in a particular case.

Modern appliances

The market does not stand still. There are several effective devices that will help you save a lot:

There is no consensus on which heating is the most economical. The choice of heating method depends on many factors and the individual characteristics of the house. However, having studied the information about all the methods of heat supply, as well as learning about their advantages and disadvantages, you can choose the most suitable option for yourself.

Owners of private houses for various reasons choose heating with electricity. Unfortunately, of all existing methods, it is considered the most expensive. Therefore, the question of how to reduce the cost of heating a house with electricity is more relevant than ever. We will consider the most economical way in more detail by comparing some types of heating systems.

Read in the article:

Advantages and disadvantages of heating with electricity

Often, houses built on private plots are not connected to energy networks: gas, solid fuel. In such cases, the organization of heating with the help of electricity becomes the only way out.

For example, many people install all kinds of heaters, stoves in the house, if the main system is not working yet. Do these methods have clear pros and cons? Let's look into this in more detail.

Heating private houses with electricity: undeniable advantages

Ease of installation of electrical heat sources.
The ability to quickly adjust the temperature to the desired level.
Saving energy consumption.
Mobility of heating sources (in case of using mobile radiators).
The ability to choose the type of convector for the interior of the house.
Environmental friendliness - oxygen is not removed (not burned) from the space of the room, there is no danger of harmful emissions.

Undeniable advantages

Cons of heating from the mains

The high cost of electricity services.
If you need to create high voltage, you will need to purchase and install an energy distributor.

Related article:

Advantages:

Such devices are compact.
Light in weight, affordable, but have a high heating power. They can be grouped, include only one or all at once.
And one of its main advantages is resistance to voltage drops, which is especially relevant for houses with old wiring.

But at the same time, the electrode system has disadvantages:

unstable power level;
extreme dependence on the composition of the conductive substance and its temperature;
requires strict adherence to the proportions of the solution and its purity;
incorrect "reaction" to adjustment and automatic control.

Russian electrode boilers for heating a private house, price range:

Models "Galan Hearth"	power, kWt	Cost, rub.
2-N	2	3650
3-N	3	3800
5-N	5	3850
6-N	6	3900

Models "Galan"	Cost, rub.
Geyser-9	7200
Geyser-15	7500
Volcano-25	7550
Volcano-36	10200
Volcano-50	12300

User reviews of electrode boilers:

Sergey, Perm: Each heating season requires new electrodes, which is considered a very laborious task. The manufacturer claims that if you adhere to all performance characteristics, the device will last a long time.

Natalia, Riga: I purchased the Vulkan-25 model. We often have to dismantle the boiler and clean it. If the plates are not cleaned in a timely manner, the thermal conductivity decreases. The manufacturer recommends first of all to pay attention to the quality of the coolant.

Induction heating boilers

If the question arises of how to heat a house with electricity economically, then this is one of the best options. Today it is the most popular and technically perfect type of electric boiler.

It works like this: in the center of the device, a primary winding is installed, capable of passing an electric current, which provokes voltage in the secondary winding section. It, in turn, consists of a circuit of pipes with a coolant. Due to the fact that there are no vulnerable nodes in such a device, the conductors of electricity do not come into contact with the heat-conducting carrier in any way.

The induction boiler can work stably for several decades! This is an economical device - it can be used to reduce energy costs by up to 40%, when compared with a heating element or electrode "brother".

Note! The device has only three conditional drawbacks - noise from small vibration, the massiveness of the design itself and its relatively high price.

Simple electric boilers for heating private houses: average prices

Heating a house with electricity: the most economical way is infrared

Along with the boiler heating system, the infrared method is especially popular today. Special heating plates are installed in the house, in which the emitter draws in electricity and converts it into an infrared wave, and then transmits it. The waves from the heater are in continuous motion until they "collide" with some opaque object.

Plates are usually fixed on the ceiling or walls. However, it should be understood that it rarely acts as the main heating system for a large private house and is more often used as an addition.

Infrared waves quickly fill the room with heat, and then automatically turn off - this is possible thanks to a special independent automatic control system.

Note! This type of home heating with electricity is the most economical way, because it does not use more electricity than necessary.

This option has only 2 drawbacks:

Expensive equipment (but at the same time it consumes electricity economically!).
Strict direction of heating from the plates to the nearest parts of the room.

Convector heaters

These heating devices are similar in function to conventional radiators - convectors heat up themselves and transfer heat through the air. However, there is no coolant inside them, therefore pipes are not required for them. Instead of a coolant, heating elements are built into the convectors (the advantages and disadvantages of this element were mentioned above), and cold air is taken in through the bottom of the device.

One of the essential advantages of the equipment can be called quiet operation, which is especially important for those who spend most of their time at home. But convectors also have a drawback - this is low efficiency. Electric convectors absorb a significant amount of electricity.

Warm floor

These electrical systems work on the basis of conductors with a resistor, through which an electric current passes, due to which they are heated.

Article

1.
2.
3.
4.
5.
6.

Owners of private real estate can independently choose the type of heating system. Economical heating of a country house is quite possible if you follow some tips and choose the right heating equipment. How it looks, you can see in the photo. Heat sources can be wood, electricity, gas, liquid fuel. Each type of heating device has both disadvantages and advantages, so making a choice is not so easy. It is important to determine which heating in a private house is the most economical for each specific case.

In addition, at present there is an opportunity to resort to the use of alternative types of energy - the installation of such heating systems is very expensive, but the heat source is absolutely free.

Thus, if you are interested in economical heating systems, then electric heaters can not even be considered (in more detail: "").

Solid fuel boilers

Wood burning stoves have been used by mankind for hundreds of years. If you wish, you can install a fireplace in the house and enjoy the play of flames on winter evenings. However, the most economical heating of a house on wood is impossible - despite the fact that wood is cheaper than electricity, it is still very expensive to use this source of heat permanently.

Peat briquettes, granulated wood chips and coal are also suitable as raw materials for solid fuel boilers. These types of fuel are much cheaper than firewood, and are often used to heat private houses, especially in areas where there is no access to the gas main.

Often, with the help of gas boilers, a traditional water heating system is created, the same as in apartment buildings. Such a unit is installed in a separate annex - it is categorically not recommended to place them in residential premises due to the release of gas combustion products (read also: "").

Oil boilers

This type of heating equipment is not so common compared to gas and solid fuel, but liquid fuel boilers also allow you to save a lot on heating. When using liquid fuel, an economical heating system for a private house is obtained, and the equipment itself is inexpensive (read also: "").

mini radiators. One of the novelties, so far little known, is a system that uses mini-radiators installed under the baseboard. Such equipment allows you to effectively warm up the premises without taking up precious space and without affecting the interior.
The principle of operation of mini-radiators is based on the fact that they do not heat the air, but transfer heat to surrounding objects. They, in turn, contribute to the heating of the air. As a result, the entire room is evenly heated, and at the same time, you can save up to 30% of electricity. Thus, it is not only convenient, but also economical heating for the home (more details: "").
Inside the system are heating elements that heat running water. The equipment uses a small amount of water - for a plinth 12 meters long, 4 liters of coolant is enough. Manufacturers give a guarantee on their products for 3-5 years.
Infrared heaters. They allow you to save up to 60% of electricity, and they do not take up much space. For space heating with the help of such devices, the installation of boilers and pipe laying is not required. Therefore, if you are interested in how to save on heating, then you should pay attention to infrared heaters - they consume a small amount of electricity, but are easy to install and do not require expensive communications.
Infrared film allows you to improve the indoor climate without consuming a lot of electricity. However, it is not enough to effectively heat the house, it can only be used as an additional source of heat.
It makes sense to install solar systems powered by solar energy in the southern regions, where there is a large number of sunny days a year. With the help of the sun it is possible to heat water for the heating system and domestic needs. However, in winter, solar systems may not be enough to properly heat the entire house, so it is recommended to supplement them with traditional boilers. See also: "".

Geothermal systems allow you to use the heat of the ground to heat a private house. In each region, the freezing point of the soil is different, therefore, before starting to create such a structure, it is necessary to calculate the required installation depth of the channels. Pipes can be laid vertically and horizontally. The first option is the most expensive, since the channels will have to be dug using special equipment. You can dig trenches for horizontal collectors yourself, but they will take up a large area near the house.
As for which heating is the most economical, the cheapest types of fuel are gas, heat from the earth (more: "") and the sun. However, it should be borne in mind that the installation of such heating systems is very expensive, so the initial investment will be very high. However, during operation, you can save on fuel, and after some time all costs will pay off.

These components of the design are too important. That is why the selection of all parts of the installation is important to carry out technically competently. The design of heating an apartment has various devices. Heating installation includes, batteries, air vents, expansion tank, fasteners, boiler pipes, pressure-increasing pumps, thermostats, manifolds, connection system. On this page of the site, we will try to select certain parts of the system for your garage.

Choosing once profitable heating for your home outside the city, you can sleep peacefully like a baby, knowing that nothing will happen to your warmth. The heating network will work and heat your home the way you want it, no matter what mood the utilities are in today.

Choose the best heating difficult, but possible. It is difficult for the simple reason that the range presented today is very wide. But the specialists of our Savard engineering company are always ready to help you and help you find the best solution. Do not forget that only companies with the necessary licenses have the right to establish such communications.

The most profitable heating for private, country houses

By the way, profitable home heating can also be installed when you decide on the heating method. The thing is, there are two methods. One of them - single-pipe - is suitable for small buildings. While for large or two-, three-story cottages, the two-pipe method is preferable, since it does not mix hot water and coolant.

The owners of private country cottages, who managed to install a water heating system in their homes, unanimously claim that such heating is very comfortable. After all, the heating is excellent, the system is safe, the air is clean, dust-free and not dry.

The boiler acts as a heating element for the system. The boiler runs on natural gas or oil. Water enters the boiler using a special pump, which also supplies water to batteries and radiators. It should be noted that the pump works almost silently, which, you see, is very convenient.

What kind of heating is profitable and why?

After installing the heating system, it is necessary to carry out pressure testing. This requires a pressure pump. There are different types of pumps. For a private house, manual is quite suitable.

Crimping is needed not only for pipes of heating systems, but also for sewer pipes. By the way, the sewerage scheme in a private house is simple. Its quite easy to build. Read about the sewerage scheme in a private house in this article.

Characteristics of a heating boiler for a private house

The power of the heat generator is selected depending on the volume of the room. For a house with dimensions up to 400 m2, a 42 kW boiler is sufficient. For large area volumes, including guest houses, country panel houses. garages, saunas and greenhouses, a high-performance unit or an economical cascade system is required. It consists of several boilers connected to each other in turn. The thermal mode is supported by automation, if necessary, turning on or off the units.

Fuel boilers are available in two types: floor and wall. Outdoor ones are more expensive, but more reliable and durable.

Types of double-circuit boilers, depending on the power:

flow type. Used when hot water consumption is minimal
With integrated boiler. This system is designed for a full-fledged hot water supply of a country house
Specialized Solutions: for heating water in the pool, devices for saunas and jacuzzi

In domestic boilers, an atmospheric burner is installed. The products of combustion are discharged through the chimney, naturally or with the help of a fan.

Steel
Galvanized
Stainless
Copper
Polymer

It is forbidden to gasify basements and basements
Ensure free access to the tank from all sides
Do not expose the gas container to heat or direct sunlight.
Operation of tanks with damage to the body and corrosion is not allowed.
The distance from the cylinder to the boiler must be at least 1 m

For a continuous supply of fuel, it is best to install several cylinders. They are connected by means of a special ramp with a flexible connection, a gas pressure sensor and a safety valve. If the cylinder is heated, the valve releases excess gas, thereby reducing the pressure inside the cylinder.

The costs of private homeowners for the maintenance of the house are already quite high. That is why the question is so popular, the cheaper it is to heat a house, the answer to which will save your budget.

Why is it profitable to heat the house yourself?

To do this, you need to understand the operation of the system. So, there should be a boiler with the function of heating water, which then goes through pipes and enters heating radiators. After a while, the water cools down and goes back to the boiler, where it is heated again. This system works in a vicious circle. In some cases, you can not do without a special pump when supplying fluid on a forced basis.

Many people are interested in how it is more economical to heat a house with a water heating system, because it is known that heating equipment can operate on various energy sources. That is why the equipment is usually divided into:

When answering the question of how to economically heat a house, it is worth stopping at gas and solid fuel boilers, since the cost of "fuel" in this case is quite acceptable. Electric boilers can be quite expensive due to the cost of electricity.

Use of heaters for heating

Modern heaters are a very efficient and safe method of heating rooms. Especially if they live in the house not all the time, but several seasons a year. The most profitable option is the use of oil coolers, which store heat for a long time and consume a small amount of energy.

Thus, in order to determine which type of heating suits you best, you must first examine all the options available, weighing their advantages and disadvantages, the economic costs of installation and operation. Do not forget to choose the heating option based on the time spent in the country house. After all, if you live in the country only in the summer, a fireplace with a stove is enough, but if you live there in the winter, you cannot do without a high-quality heating system.

Heating your home with electricity is one of the most convenient and efficient ways to heat your home. It has a lot of advantages over traditional heating technologies that use gas, coal or wood as fuel. Previously, the electric heating system had a significant drawback in cost, but modern technologies make it possible to level it. We will talk about how to make home heating with electricity inexpensive and we will talk in this article.
Content:

Why electricity?

Electric heating differs from classic water-furnace and gas systems in greater efficiency and practicality. We will leave the first aspect for discussion a little lower, and describe the operational advantages here:

Electric heating is not only silent, but also environmentally friendly. It is transported safer than gas and does not emit harmful substances at all, both into the atmosphere and into the room. In the absence of waste, the need for exhaust chimneys and traction structures also disappears. Heating on coal or wood is not at all comparable to electrical systems.
Heating with electricity does not require large one-time costs. You can make a comparison using the example of gas: in order to connect a house, you must purchase equipment for each room, install communications, a boiler, and crash into a common highway. Moreover, it is necessary to do all this together, since it is impossible to postpone bringing some part of the house to the system. And the electric method allows you to organize sequential installation: first, the most important parts of the house are connected, and then, as funds accumulate, peripheral ones.
Due to the possibility of using a multi-tariff meter in a private house or apartment, as well as the constant development of technologies in this area, heating with electricity is already the most economical among analogues. Do not focus on the high price of equipment - it quickly pays off due to low energy consumption.
Almost every method of organizing electric heating allows you to do the installation yourself, without many additional tools.

Of course, the use of electrical systems for heating cannot be called ideal. Work on high-quality heating of each house requires taking into account many features. In some regions, the cost of electricity can be so high that gas cannot be abandoned. In old apartment buildings, it is difficult to switch to electric heating for two reasons: it is very difficult to disconnect from the central highway, and the power grid will have to be built again, taking into account powerful equipment.

Despite this, the overall picture tips the scales in favor of electricity. For rooms in which there is no gas or there is no possibility of supplying it, it is a real salvation.

Varieties of heating systems

There are several ways to organize electric heating in your home. Each of them has its own advantages and disadvantages. Some are cheaper at the stage of purchase, and some save significantly during operation. Let's look at what features each method has:

Installation of an electric boiler designed to heat water flowing through the pipes of the heating system. Perhaps the most well-known method, but it is far from the most effective today. Manufacturers claim that current models have become much more productive and now consume 80% less energy, but this is a moot point. Manual switching on and off of the boiler is, of course, impractical, and automatic at a given interval does not take into account the temperature regime of day and night. A more or less economical option is to install thermostats and appropriate automation to turn on depending on the temperature in the rooms, but this is difficult in terms of installation and very costly. Reduced power models with equal performance are also nothing more than advertisements. Such a boiler, most likely, will not have enough “strength” to heat a large private house.
infrared panels. This is not just a way to heat rooms, but a fundamentally different technology. The point is not to warm up the air (which has a very low efficiency), but to influence the objects located in the room. Under the light of IR lamps, floors and furniture heat up and begin to emit heat themselves. The fundamental difference is that the traditional "radiator" method of space heating actually heats the ceiling (warm air from the battery rises), and the floors remain cold. With infrared heating, the opposite is true. The light is directed downwards, which means that the warmest place is the floor. Complement the system with thermostats - and economical heating of a country house, private house or garage is ready. And the opinion about the dangers of infrared radiation on a person is nothing more than a myth. The main thing is not to be under the lamp for a long time, and nothing dangerous will happen.
The use of convectors. According to manufacturers, this is the most efficient way of space heating, which combines high performance and economical energy consumption. Both of these statements are the subject of a long dispute, since the technology is based on the same “radiator” principle, and many individual characteristics should be taken into account in heating a house. The main difference lies in the significant ease of installation and operation and lower price. An important advantage of convectors is fire safety, which is very important when heating a country or private house made of wood. Convectors allow you to install them sequentially from room to room, they are compact and pleasant to look at, and they are also protected from power surges.

Inappropriate Options

There are several types of electrical equipment designed for space heating, but not recommended for use as the main source of heat:

Thermal fans. These devices have the simplest device and are a large hair dryer, consisting of an incandescent spiral and a fan that drives a stream of air through it. Their use will definitely not be cheap - the air cools extremely quickly, and it will not work to maintain a comfortable temperature for a long time. Do not forget also about the loads on the electrical network and the harm - too dry air is harmful to domestic plants and people.
Oil radiators are probably the most common device used by residents of apartment buildings when there is not enough central heating power. Surprisingly, this is still the least efficient way of heating. And even if it is possible to heat the room to a comfortable temperature, it will come out not at all cheap.

Why is this equipment so common if it is inefficient. The fact is that all these are auxiliary devices designed to help out in emergency situations or when the main heating does not cope with its tasks. For a garage, for example, constant heating is not always needed. For the period of repair work, it can be heated with a heat gun (fan heater) powered by electricity or gas. But in a house where it is necessary to constantly keep the temperature at a certain level, infrared panels are much more effective.

Organization of economical heating

You should not have a long debate about which equipment of the listed options best combines economy, efficiency and safety. It will be much more practical to use one or another option in the most suitable conditions. Below are the basic principles that should be followed in order to create economical heating with electricity at home:

The first rule is common for both gas and electric systems - keep heat loss to a minimum by insulating walls, ceiling and floor. Thanks to this, you can reduce the required heat output to maintain the temperature. Of course, additional costs are necessary for this, but they pay off with savings in electricity. The temperature inside an insulated garage rises above zero in winter in half an hour if a car is running inside. In an insulated house, you will only need to maintain heat, and not constantly pump it, forcing the equipment to work at increased power.
Design an optimal electric heating system. For example, an electric boiler can be quite effective for heating a small one-room apartment (if the heat loss is very small). But for a house with a large number of rooms, this is not the best option. Here it is more convenient to install a convector system with thermostats that control the climate in each room. Infrared panels are good for a garage, closet, or utility room that doesn't need to maintain a constant temperature.
In rooms and houses that are not used throughout the day, it is optimal to combine electric heating equipment. As an example, let's take a kitchen with a main convector and an auxiliary IR panel. The convector allows you to maintain a minimum temperature throughout the day, and the panel turned on before the evening meal will quickly warm the room for a comfortable dinner. Similarly, you can arrange the heating of a bathroom, outbuildings or a heated garage.
Thermoregulatory automation allows you to accurately adjust the temperature. Depending on specific models and devices, you can set "hot" and "cold" periods, use photo sensors to make the room warmer in the presence of people, and apply other settings. All these seemingly insignificant little things can greatly help in reducing costs.
A large proportion of the consumption of the heating system falls at night, when all residents are at home. You can significantly reduce bills for this period by switching to two-tariff electricity metering. The night rate, as a rule, is 3-4 times lower than the main one. To replace the meter and change to the new metering rules, contact your local power supply company.

Electric water heater

As we can see, economical heating of a private house without gas is quite feasible. The main thing is to carefully plan the transition to electricity, consider which devices to use for the main premises, and which ones for the periphery (garage, bathhouse, and other buildings). Of course, buying everything you need can cost a pretty penny, but these costs are offset by the amount that you will save over the coming years.