Sliding gates ads400. Sliding gates. Variety of design solutions
In the ADS400 series format, Alutech offers high-quality sliding gates that can highlight the presence of any country house. After all, the ADS400 gate emphasizes good taste owners of the house, while simultaneously ensuring a streamlined entry and exit procedure. In short, any gate from the ADS400 series is a real calling card of a presentable home for a modern person.
Moreover, the range of the Alutech ADS400 series amazes with the breadth of the range and the wide choice of finishes for the doors. Moreover, Alutech guarantees that its products will last at least 15 years. And the high quality of components is the best collateral maintainability of both the entire product and individual elements of the gate (automation, lining, etc.).
Therefore, the ADS400 series can be used not only in everyday life, but also in barriers of commercial or industrial facilities.
What's the benefit? Five advantages of sliding gates from Alutech
Firstly, Alutech ADS400 gates are covered with twenty types of filling materials, which include 45 mm heat-resistant panels and regular sheets corrugated metal, and wooden boards. That's why appearance The ADS400 gate will fit into the exterior of any building envelope.
Secondly, the ADS400 gate is made from aluminum profile, which, in turn, is covered with a special polymer protector. Therefore, Alutech gates are not afraid of either precipitation or structural corrosion. And the service life of such products is measured in decades.
Thirdly, the frame of the Alutech ADS400 gate is made from a profile with a cross-section of 96x117 millimeters, which is reinforced with internal and external stiffeners. Therefore, sliding gates from this company are distinguished not only by their corrosion resistance. But also the overall rigidity of the structure. However, the sash itself weighs much less than its steel counterpart, with almost the same strength of the leaf.
Fourthly, the mechanics of the Alutech ADS400 gate are designed for at least 25,000 access cycles. Therefore, replacing worn components, in living conditions operation (about four throughput cycles daily), can be planned no more than once every 15 years.
Fifthly, the Alutech ADS400 gate operates almost silently. After all, the support rollers of lightweight aluminum gates are made of glass fiber reinforced polyamide, and the rack is made of nylon. Therefore, the throughput cycle of Alutech products will not disturb even the most sensitive sleep of your household or neighbors.
You can also replace the gate lining by replacing the corrugated sheet with wood paneling or SIP panel even without dismantling the sashes.
Design of sliding gates Alutech ADS400
Sliding gates Alutech companies consist of three main elements:
- The frame of the canvas, filled with lining.
- The supporting part, consisting of a pair of supporting pillars with rollers and braces supporting the pillars. Moreover, the entire supporting part is attached to its own base.
- Gate mechanics, consisting of a motor and a gear mechanism (gear and rack), providing automation of the access cycle.
The catchers of such gates are mounted directly on the supporting post of the fence, and the bolt is secured in the area of the supporting part.
Alutech ADS400 gate lining
As a frame lining, Alutech offers more than 20 types of “fillers”, both internal and overlay types. Moreover, all “fillers”, to one degree or another, belong to the following types of lining:
- Sandwich panel is a multilayer product consisting of two strips sheet metal, between which a layer of foamed polyurethane is laid. Moreover, the outer part of the panel can copy both color and texture natural wood. This is the most presentable sewing option.
- Corrugated profile rolled onto sheet metal using special rollers. This lining increases the strength of the gate.
- Aluminum profile produced by extrusion. Moreover, the width of such a profile can be very different. This is the most quick option lining, which can be changed by choosing a different color or texture on the surface of the profile, literally in one day.
The Alutech gate frame can also be sheathed with regular wood.
Gate mechanics Alutech ADS400
The design of Alutech sliding gates uses automatic equipment from AN-Motors and Nice brands. That's why Belarusian manufacturer offers customers a product, in essence, European quality. After all, the Nice and AN-Motors brands guarantee stable operation for at least 25 thousand gate opening and closing cycles.
In addition, the Alutech ADS400 gate can be equipped with a block automatic control drive (photocells) or remote control remote control, allowing you to “open” the gate without leaving your home or car.
Cost of sliding gates Alutech ADS400
Like any quality item, the Alutech ADS400 gate will not be cheap for its future owner. A canvas with dimensions of 3.5x2 meters (width and height) will cost 1,100 euros, and for a gate measuring 4.5x2 meters you will have to pay 1.5 thousand euros. And this is without stitching!
At the same time, a gate cut into the canvas either at the factory or “on site” will cost 400-450 euros. And for installing the gate, the future owner will be charged from 8 to 15 thousand rubles.
However, taking into account guaranteed problem-free operation for at least 15 years, this price does not seem so high.
Entrance gates are the calling card of any modern cottage, home or industrial facility. Stylish and reliable gates, controlled by automation, are a real architectural decoration of the house. Entrance gates of the ADS400 series are distinguished by high level quality, attractive design, wide range of designer and functional solutions, as well as reliability and trouble-free operation. 
Advanced solutions for entrance gates
Alutech ADS400 Series Component SystemUsed for the manufacture of sliding, swing gates and gates, as well as fence sections, and is intended for installation on private and industrial sites.
- Gate/wicket frame – consists of durable aluminum extruded busbar profiles and/or a polymer-coated frame.
- Corner connecting elements – push-button tightening corners and aluminum trusses.
- Filling gates/wickets. The filling can be used: sandwich panel, roller-rolled profile or aluminum extruded profiles in various combinations.
- Accessories for moving sliding gates - roller supports, top brackets and rollers, catchers.
- Accessories – hinges, handles, linings, locking system.
- Package.
Appearance of the canvas
Sandwich panel
ALUTECH sandwich panel is one of the most durable panels in Europe. Its thickness is 45 mm, which determines the resistance of entrance gates and gates to wind and shock loads. Continuous filling of sliding and swing gates with a sandwich panel ensures a uniform style with sectional garage or industrial doors.The increased density of the polyurethane foam filler (46–47 kg/m3) ensures the rigidity of the door leaf and high resistance to deformation.
The polymer EPDM seal eliminates the appearance of gaps between the panels of the door leaf due to its high elasticity properties at low temperatures.
A zinc coating with a thickness of 16 microns reliably protects the surface of the door leaf/wicket from the effects of precipitation.
Multi-layer protection
In the production of ALUTECH sandwich panels, galvanized steel strip 0.4 mm thick is used, which guarantees high strength characteristics and durability of the door leaf. A zinc coating with a thickness of 16 microns, as well as a two-layer polymer coating with a thickness of 25–35 microns, reliably protects the surface of sandwich panels from mechanical damage and exposure to precipitation. Multilayer high quality coating
ALUTECH panels are coated with a two-layer polymer polyurethane coating with integrated polyamide particles (PUR-PA) 25–35 microns thick. This ensures resistance to the formation of scratches and notches due to mechanical stress, high levels of hardness and elasticity, and resistance to fluctuations in temperature and humidity.Variety of panel types
|
L-GOFR
M-GOFR
S-GOFR
MICROWAVE
FILLWide range of colors
|
close to RAL9016 close to RAL8014 Golden Oak Dark oak close to RAL1015 close to RAL3004 close to RAL5010 close to RAL6005 close to RAL8014 close to RAL9006 close to RAL7016 |
Wood grain panel
Roller Rolling Profile AG77
Uniform foam filling without pores or cavities guarantees high load resistance and minimizes profile deformation. It is possible to install the AG/77H profile with hard foam filling, which provides even greater resistance to wind and impact loads of the gate/wicket leaf. The paint coating of the profiles is resistant to:
abrasion and scratches;
cracking and peeling;
UV radiation – the color of the coating is preserved under intense solar radiation;
corrosion, which is especially important for coastal zones and in the urban environment.
Uniform foam filling without pores or cavities guarantees high load resistance and minimizes profile deformation. It is possible to install the AG/77H profile with hard foam filling, which provides even greater resistance to wind and impact loads of the gate/wicket leaf.
Wide range of profile colors
A wide range of profile colors provides various options combination of gates with the facade of the building. Depending on the color entrance gate can merge with the facade or, conversely, serve as a bright element, creating original individual solutions.|
close to RAL9016 close to RAL8014 close to RAL8019 close to RAL7038 close to RAL6009 close to RAL6005 close to RAL3004 close to RAL5011 close to RAL1019 close to RAL9011 close to ADS703 golden oak |
Filling with a roller profile allows you to minimize production waste in the manufacture of garage roller doors.
Aluminum profiles
Aluminum extruded profiles various widths: 37, 82 and 87 mmAt the request of the customer, it is possible to produce a door leaf or wicket with continuous, sparse or combined filling with aluminum profiles. The filling can be installed horizontally or vertically.
High quality aluminum alloys
For the production of ADS400 aluminum profiles, only primary aluminum is used. High quality aluminum alloys for the production of extruded profiles "ALUTECH" is confirmed by the conclusion of the accredited testing center of the state scientific institution "Institute of Powder Metallurgy" (certificate No. BY/112/02/1/0/0263), where the alloys were examined. The use of aluminum alloys in the production of the main structural elements of sliding, swing gates and wickets, as well as filling, eliminates corrosion and ensures long term operation of products.
7 standard colors
Powder coating quality
The paint and varnish coating of ALUTECH profiles is resistant to mechanical impact and corrosion, is distinguished by the stability of the glossy finish. Confirmed by Qualicoat certificate (Switzerland).
High anti-corrosion properties of the coating
High-quality coating of aluminum profiles ensures long-term operation of entrance gates and gates under conditions of exposure to aggressive environments (coastal regions). Confirmed by Seaside certificate (Switzerland).
Individual approach to the choice of filling material
Alternative types of filling (wooden board, metal profile)In order to best meet customer needs, other materials, such as wooden boards and metal profiles, can be used as filling.
Combined filling (aluminum and sandwich panel)
The unique look of the gate is given by filling it with a sandwich panel in the lower part and an aluminum profile in the upper part of the gate leaf or wicket.
Variety of design solutions
The high technology of the system and the use of profiles of various widths and colors for the manufacture of gates make it possible to implement finished design various color solutions - from classic white and brown to original ones, which allows us to offer the customer a gate with a unique style.The unique configuration of the ADS400 series profiles allows us to offer the end user more than 20 options constructive solutions gates and wickets, varying in design and cost.
The overhead and built-in type of installation of the infill requires both horizontal and vertical placement.
Built-in type of frame filling installation
alternative material (wooden board
Combined filling
profile AG/77 and aluminum profile 37 / 82 mm
sandwich panel and aluminum profile 37/82 mm
Continuous filling with a 45 mm sandwich panel
roller profile AG/77, AG/77H
aluminum profile 37 and/or 82 mm
aluminum profile 87 mm
alternative material (wooden board, metal profile, etc.)
Overhead type of frame filling installation
Continuous filling
aluminum profile 37 and/or 82 mm
aluminum profile 87 mm
alternative material (wooden board, metal profile, etc.)
Sparse filling with different steps
aluminum profile 37 and/or 82 mm
alternative material (wooden board
Options for top profiles for surface mounting
Bevel towards/from the middle
Arc up/down
Diagonal bevel
Comb-shaped
Competitive advantages of ads400 gates: reliability and durability
Quick, easy assembly
Upper profile of sliding gate frame
The design of the upper frame profile protects the upper rollers from moisture, which ensures their longer service life.
Simple assembly of gates at the customer’s site
The combined design of the bus profile and frame reduces the time for assembling the sliding gate frame. When assembling the frame, only drilling and cutting operations are used, eliminating the need to mill the impost profile. The number of profiles and labor-intensive assembly operations is minimal.
Roller support for sliding gates
The use of roller supports with rollers made of glass-filled polyamide and a nylon rail ensures quietness, smooth operation and long service life of sliding gates.
High reliability and corrosion resistance
All main structural elements are made of aluminum profiles with a polymer coating, which eliminates corrosion and significantly increases the service life of the products. The minimum operating life of the gate is 25,000 opening/closing cycles, which corresponds to approximately 15 years of operation.
Own production complexes
Melting and foundry complexMelting of primary aluminum and production of aluminum ingots for extruding profiles.
Press lines for the production of aluminum extruded profiles
Production of a wide range of profiles of varying complexity, control of surface quality and geometry
Complex for painting aluminum and steel tape
Multi-stage preparation and special processing of the tape provide the required color, gloss and texture of the surface, strength and resistance to abrasion and ultraviolet radiation.
Powder coating lines
Painting of aluminum extruded profiles in automatic cameras. Vertical painting line is an advanced painting production using chrome-free surface preparation technology, quick color change system, automatic temperature control and firing process control. High-tech equipment provides high-quality coating with high resistance to heat and ultraviolet radiation.
All the main components for the production of entrance gates and gates - bus profiles, frame profiles, glazing bead and impost profiles, corner connecting elements, sandwich panels, roller-rolled profiles, aluminum filling profiles - are produced at the enterprises of the ALUTECH Group of Companies. Modern system control at each stage of product development and production ensures high quality and long service life of the product.
Sandwich panel production line
Allows the production of a wide range of sandwich panels: S-corrugated, L-corrugated, M-corrugated, microwave and panel. The production of panels is carried out on a modern high-performance line of the company SIEMPELKAMP (Germany), one of the world's leading manufacturers of this type of equipment.
Roller profile production lines
11 automated rollforming lines for the production of foam-filled roller profiles and boxes.
Roller shutters are perfect protection for windows and doorways shops and offices located on the lower floors of buildings, windows of residential premises. Roller shutters reliably protect objects from unwanted entry at night or on weekends, and in apartments they provide additional sound insulation. IN summer period Protective roller shutters effectively protect rooms from heat and reduce the cost of electricity used to operate air conditioners and fans. Anti-vandal versions of roller shutters have increased burglary resistance.
Structurally, metal roller shutters are made of aluminum lamellas. It slides along the guides and rolls up. The roller on which the fabric is wound is located at the top of the opening and is covered with a protective box. Roller shutters are controlled automatically or mechanically. Mechanical options: use of a crank, cord inertial drive or built-in spring-inertial mechanism. Automation is more convenient and is used more often. It allows you to simultaneously control roller shutters in several window openings, set the program to open or close the roller shutters. For emergency situations the possibility of manual control is retained.
The lamellas that make up the canvas are made in two ways. Roller rolling ensures a low profile wall thickness. When manufacturing roller shutters, the profile is filled with hard or soft foam, which provides the structure with lightness, strength, and imparts heat-insulating properties. Protective structures with roller-rolled lamellas are used for installation on the upper floors of apartment buildings or country houses, for zoning warehouse premises. The profile obtained by extrusion (punching) has internal ribs that increase the rigidity and burglary resistance of the canvas. Extruded profiles are used to protect openings on the first floors and are placed in store windows.
The structures look quite aesthetically pleasing, with making the right choice colors serve as a good element of decor and design of the facade of a building. Color solutions Roller shutter coverings are matched to the color of the frames or to the architectural appearance of the building facades. Thanks to the use of frost-resistant, UV-resistant paint, the appearance metal structures long time remains unchanged.
How to choose the right one garage doors?
Garage doors must meet two requirements - strength and reliability. This is necessary to ensure the safety of vehicles. The gate is considered as a barrier to criminal elements encroaching on other people's property. Until recently, durable doors and the massiveness of the locking device were the main limiting factor. There was no alternative garage doors swing type. The situation has changed dramatically. It became possible to choose among a variety of gate modifications. All have both advantages and disadvantages.
Consumers make a choice based on financial capabilities and focusing on the reliability declared by the manufacturer. The most in demand following types gates: sectional and roller.
Sectional doors
This is also a popular option. The gates are equipped electric drive with a set of sensors that monitor safety and remote control. Sensors stop the door leaf when an obstacle appears in front of it. It is possible to open the sash in manual mode. Gates are distinguished by their affordability and variety of finishes. There is no need for free space in front of the garage. Garage waterproofing is provided at a high level.
Sectional doors fit into opening widths up to 6 m and heights up to 5 m. They do not require the installation of a locking device. The reliability of closure is controlled automatically. This design expands the range of its application. It is often found both in private garages and in warehouse and production areas. Finishing materials allow you to fit the gate into the framework of any concept of a garage structure, residential or industrial building.
Rolling gates
This type of gate resembles roller shutters. The advantage of the design is maneuverability and compactness. Other important characteristics are at an average level. This concerns sound absorption, durability and thermal insulation. Technical failures may occur. Preference for such gates is given where the threat of unauthorized entry is absent or minimal.
Sliding gates for industrial facilities and private properties
The scope of application of sliding gates is very wide: warehouses and markets, parking lots and parking lots, industrial areas and country estates. It's no surprise that they are in demand among consumers. The key to this is functional convenience, a high level of protection and long term services of these structures. In addition, they have impeccable aesthetic characteristics and fit harmoniously into any architectural and landscape solution.
Sliding gates ADS400 series: new generation products
Today, the ADS400, being a product of the latest technologies, is the most popular series of sliding structures in the Alutech line. Compared to analogues, their design is more universal, and their advantages are more obvious. Even more reliability, aesthetics, wider scope.
Sliding gates of the ADS400 series are characterized by traditionally high quality, inherent in principle to any Alutech product. At the same time, they represent an improved, innovative version of gate structures that optimally suits the tasks wide range objects.
Listed below are several important differences from analogues:
- – over twenty options, including sandwich panels, roller shutter profile AG/77, aluminum profile, wooden board, profiled sheet, etc.;
- Accessories– have become even better quality, operation - even more reliable;
- Service life – is 15 years (at least);
- Price for Alutech sliding gates– even more accessible.
The range of goods has expanded. ADS400 series products fully comply with European quality standards and allow you to choose suitable option designs even for consumers with very high demands.
 |
 |
 |
A new level of quality opens up new possibilities
- Enterprises of the ALUTECH group of companies produce sliding gates, including products of the ADS400 series, exclusively from their own components: frame profiles, tires, glazing beads, imposts; connecting elements, roller rolling, aluminum filling.
- At all the most important stages production is subject to intermediate quality control, which ultimately ensures high reliability of door structures and a long service life.
- During the production process, a high-tech aluminum profile with a polymer coating is used, from which all essential elements. Result - high degree protecting the canvas from atmospheric influences and corrosion.
- ADS400 series profiles provide various options overhead and internal filling (more than twenty types), which allows us to produce structures in various price categories, from elite to quite budget ones.
- The high strength, rigidity and reliability of sliding gates is due to the characteristics of the universal aluminum bus profile, structurally combined with the frame profile.
- All fasteners are installed in a hidden manner, which not only adds aesthetics, but also significantly increases the degree of protection against unauthorized access.
- Sliding gate rollers made of glass-filled polyamide and a nylon rack guarantee silent operation.
- The constructive solution allows for current repairs and even change the filling of the canvas without dismantling.
The designers have worked hard to ensure that the minimum operating life of the Alutech ADS400 series sliding gates is at least 25,000 operating cycles of opening and closing, which is equivalent to 15 years of continuous operation.
Design
The aluminum frame with filling moves on roller supports inside the self-supporting structure, which installed on the foundation behind the opening (outside the gate passage area).
Additional equipment
You can additionally equip Alutech structures with the following elements:
- support frame for concreting;
- supporting pillar and brace;
- toothed rack.
Also, to ensure convenient access to the territory, you can additionally install a free-standing gate.
Fill Types
Alutech sliding gates ADS400 series are ideal for architecture such as modern house, and classical style.
Various designs (panel, horizontal corrugation, microwave) and panel colors go well with any finishing material.
Sandwich panels
 |
 |
 |
| s-corrugation | m-corrugation | l-corrugation |
 |
 |
|
| Microwave | Panel | |
Sandwich panel textures
High strength and resistance to wind and shock loads
- The 45mm thick Alutech sandwich panel is one of the most durable panels, which determines the resistance of gates and gates to wind and impact loads;
- The increased density of the filler (46-47 kg/m3) ensures the rigidity of the door leaf and high resistance to deformation;
- Maintain high strength and elasticity when negative temperature The EPDM polymer seal that each sandwich panel is equipped with helps. The seal also helps eliminate gaps between panels.
Roller rolling profiles AG/77, AG/77H
Durability and stability
Alutech sliding gates, created on the basis of an aluminum frame, have a ten-year quality guarantee. Having found itself in use in many industries, the product made it easier to move. The movement of the panel began to occur on supports made of rollers. They are attached to the opening, which in turn is located in the foundation. The updated functionality makes it possible to forget about the difficult efforts when closing and opening doors.
Besides optimal parameters width, height and length, the manufacturer offered the following guarantees:
- Diversity. Large range of models with various fillings and design solutions
- Durability. The material used in manufacturing is designed for 15 or more years of operation
- No noise. Functioning on casters allows closing and opening as silently as possible
You can buy Alutech sliding gates on our website. We provide best product for you, at the best prices.
Technical progress is moving forward by leaps and bounds. Human consciousness also quickly adapts to changes. So, if previously entrance gates were considered a luxury item - not every average family living outside the city could afford such a purchase - today homeowners around the world appreciate the undeniable advantages of using such structures. One of these is sliding and swing gates of the ADS400 series from ALUTECH: an exclusive offer on the market of entrance structures in the CIS.
Modern ALUTECH entrance gates are gradually replacing outdated welded steel structures from the market and are becoming an increasingly popular choice for homeowners. First of all, this is due to their advantages: they have a modern and high-quality design, are easy and quick to install, and are also silent and easy to use.
“Pushing” stereotypes
ALUTECH sliding gates are the ideal solution when you need to save space in front of personal plot: they open moving along the fence, thereby perfectly compensating for the lack of space.
Sliding gates ALUTECH
Swing gates ALUTECH
The average price for such gates is about 1100* euros. At the same time, they will serve you for at least 15 years. Using simple arithmetic, we get only 6 euros per month. Adding to them a number of acquired advantages in terms of functionality, convenient and safe operation, original and bright design, it becomes obvious: how little quality and beauty cost in their physical embodiment!
If there are certain obstacles to the movement of the gate along the fence (for example, bushes or trees are planted close to the perimeter of the fence) and free space allows, then it is better to opt for a functional swing series. Such gates also have a number of design advantages.
- The promotional price for gates (4000×2000) mm in the basic configuration does not include installation. Please check with regional representatives of ALUTECH about the conditions and period of the promotion.
Your own designer
The design of ALUTECH entrance gates can provide many filling options - today more than 20 types of door leaf and wicket filling are available for order. Thus, sliding and swing gates ADS400 can be made of:
- sandwich panels (available for order in 5 fabric patterns, 3 wood colors),
- roller rolling profiles (supplied in 10 standard colors and 3 wood shades),
- extruded profile (available in 7 standard colours).
At the request of the client and in order to save money, entrance gates can also be made from a more economical material - profiled sheet, wooden board or any other sheet material.
ALUTECH sliding gates filled with sandwich panels
Thus, the entrance gate will be able to harmoniously fit into any, even the most demanding, exterior.
Investing in durability
ALUTECH entrance gates are aimed at long-term and reliable operation. Hidden fastening of structural elements allows you to protect the gate from unauthorized access. The use of roller supports with rollers made of glass-filled polyamide and nylon slats ensures smooth and silent movement of the gate. Additional protection against sagging of the leaves during operation of swing gates and wickets is guaranteed by three-section overhead hinges.
All gates of the ADS400 series are equipped with high quality fittings, which makes these designs even more durable and easy to use.
It won't rust behind us
ALUTECH entrance gates are resistant to corrosion, mechanical stress, cracks and scratches. This is ensured by applying high-quality paint coating on the door panel, as well as wear-resistant polymer coating on the frame profiles. Thus, the ADS400 entrance gate filled with sandwich panels or aluminum profiles preserves bright color even after prolonged exposure sun rays or operation in regions with high humidity.
Gates that are easy to install and low maintenance
Entrance gates of the ADS400 series are supplied fully prepared for installation - complete with the required size and with holes prepared for assembly. Due to this, their installation will take very little time - no more than 4-5 hours. The modern design makes servicing ALUTECH gates simple and convenient: if damage needs to be repaired, components can be easily replaced with new ones.
So, having paid for these structures once, you will forget about discomfort and possible problems when servicing them.
And a few more words about pleasant things...
The gates can be equipped with either manual or automatic opening: it all depends on the client’s wishes for convenience and the planned frequency of using the car for exiting and entering. You can also install a gate in the gate - an additional entrance will extend the service life of the structure. By the way, its design can be selected in the same style as the design of the gate itself.
Well, do you still think that gates are expensive? Think again, your comfort costs much more! But they don’t skimp on themselves (and in this sense, on their peace and comfort), as they say.
You can get more detailed information about products on our website or by contacting our.
