Dorkhan drive for sliding gates instruction 800. What does the household and industrial purpose of the drive mean?
Description DoorHan SLIDING-800
The DoorHan SLIDING-800 drive is designed to automate sliding gates weighing up to 800 kg, up to 4.5 m wide with a built-in receiver, a platform for concreting
The rotational movement of the output sprocket is converted into forward movement of the gate by means of a toothed rack mounted on the gate.
The electromechanical drive of the SLIDING-800 model consists of a mechanical reducer and an electric motor with an integrated control unit. The gearbox and motor are made in a single housing.
An external control button is connected to the control unit.
The self-locking gearbox provides mechanical locking of the gate if the motor is not running. In the event of a power failure, the emergency manual release allows the gate to be opened or closed manually.
Main functions
Advantages:
Specifications DoorHan SLIDING-800
- Unit: 1 piece
- Dimensions (mm): xx
- Weight (kg): 15.00
- Model: SLIDING-800
- Type: Drive
- Supply voltage (+6–10% 50 Hz), V: 220
- Power, W: 280
- Gear ratio: 1:32
- Rail: M4 x 12.566 mm
- Gear: Z16
- Maximum moment, Nm: 20
- Thermal protection, ° С: 125
- Intensity, %: 50
- Temperature environment, °С: from –20 to +55°С
- Protection class: IP55
- Maximum gate weight, kg: 800
- Gate speed, m/min: 12
- Control unit: PCB-SL
- Limit switches: magnetic
- Consumption current, A: 2.1
- Capacitor capacity, (uF): 10
- Manufacturer: Doorhan
- Contents of delivery:
- Drive SLIDING-800 - 1 pc Mounting base - 1 pc
SLIDING-800 Documentation
Parameters of DoorHan SLIDING-800
Protection class Power supply (V) Consumption current
electric drive sliding gate produced by DoorHan Group of Companies (Russia) Sliding 800 is optimal solution to automate private gates. Sliding 800 drive manufactured on modern high-tech equipment. The drive consists of two main units - an electric motor with a PCB-SL/V.1.0 control board. with built-in radio receiver with a maximum number of programmable remote controls in the amount of 60 pieces and a mechanical gearbox. The electric drive motor and gearbox are installed in a single sealed rugged housing and this factor actually allows the Sl-800 drive to operate submerged in water almost to the control board itself. Therefore, the Sliding 800 sliding gate operator operates very quietly and does not cause discomfort to the user. The Sliding 800 drive has a self-locking gearbox, which is unlocked with the key supplied in the kit and allows you to open the gate by hand in case of a power failure. The electronic limit switches of the electric drive Sliding 800 reliably stop the motor in the set end positions of the gate. The Sliding-800 is controlled by a wired NO contact or by a radio remote control. remote control and can also be controlled in a combination of these types of control.
The drive Sl-800, like its similar model Sl-300, is screwed with four nuts to the base on which it is mounted. There is no special mounting base for the SLIDING 800. The Sliding 800 drive has a built-in electronic end reader DHSL041N, which is triggered to stop in end positions thanks to magnets that are mounted on the rack on brackets of different polarity. These end magnets are always supplied with the actuator in one box. The sliding gate operator Sliding 800 has a built-in PCB-SL/V.1.0 control unit. This control board compares favorably with the previous series with easily removable and pluggable snap-on terminals. PCB-SL/V.1.0 control board. has a protective cover and protects it from accidental damage. PCB-SL/V.1.0 control board. equipped with a built-in radio receiver board for 60 remote controls. New PCB-SL/V.1.0 board. has all the most necessary functions for use and has many new advantages:
The control board has multi-colored terminals that visually simplify the connection of the necessary devices and control elements.
The control board has a pleasant option to slow down the work before the end positions of the work, namely, it is activated thanks to DIP No. 4, which contributes to a significant increase in the life of the drive and the gate.
The control board has an installable option for remote programming of the consoles, i.e. from an already programmed remote control, you can transmit and record a radio signal to a new remote control within the range of the control board receiver and you do not need to remove the drive cover.
- The board has an upgraded input electrical circuit and this is especially useful when the level of electrical voltage is unstable and thereby increases the service life of the board.Characteristics of the SLIDING 800 drive
Supply voltage - 220V / 50Hz
Rated power - 280 W
Gear ratio - 1:32
Pinion - Z16
Maximum linear force - 900N
Maximum moment - 20 N m
Thermal protection - 120 0 С
The speed of movement of the door leaf - 12 meters per minute
Maximum door leaf weight - 800 kg
Intensity of use - 50%
Range operating temperature from - 20 to +55 0 C
Protection class - IP54
Control block - PCB-SL/V.1.0.
Limit switches - magnetic
Current consumption 2.1A
Capacitor capacitance - 10 uF
 The circuit board has a self-resetting fuse made of polymer material with very low resistance. In the event of an overcurrent, the resistance rises sharply, bringing the current down to a safe value as much as possible. |  The transformer of the control board of the Sliding drive, due to the increased cross-section of the winding wire and the optimized core, has improved technical characteristics. |
 The optimally selected value of the operating voltage of the control board varistor allows you to protect the transformer and the board from high-voltage impulse noise. |  Programming the operation of the Sliding drive is carried out using knobs fine tuning and DIP switches. Convenient to program the desired functions |
Sliding gates must comply with EN 12605 and EN 12604.
- Before installing the SlIDING 800, make sure that the climatic conditions are correct.The SlIDING 800 is not designed to be mounted higher than 2.5m from the ground.
- The SlIDING 800 must not be used in areas with flammable substances and gases.When mounting the electric actuator Sl-800, it is necessary to use the tools specified in the instructions.
- When installing or maintenance The SlIDING 800 drive must always be disconnected from the power supply.If the Sl-800 drive is mounted on a gate with a built-in wicket, then it is necessary to install an open wicket sensor on the wicket.
The electric drive SlIDING 800 must not be left in the disengaged state, as uncontrolled movement of the door leaf may occur and it may break.
Always for safe work gate, it is necessary to install a safety mechanical stop to limit the movement of the gate.
- Electrical cables to the SlIDING 800 actuator must be laid by a qualified installer, and the power supply cable must be laid in a protective corrugation.
Cables used for Sliding 800 drive and photocells
- Cable 2x0.5mm - photocell and step button for control.Cable 4x0.5mm - photocell receiver.
Cable 3x2.5mm - power supply.
The Sliding 800 sliding gate operator is the middle model in the equipment line of the same name. The device is designed to service sliding gates with an opening width of up to 4.5 m, while the leaf weight should not exceed 800 kg. The equipment is a model of reliability, good performance and reasonable cost. Automation is capable of operating in the intensity mode of 50%, its design is designed for operation under conditions of serious loads and temperature fluctuations from -20 ... +55 C.
The main advantages and features of the structure of automation
Sliding 800 has broad scope applications. It is advisable to purchase it for installation at car service facilities, unheated warehouses, parking lots and areas for transport. Automation of this model is in demand for domestic use– Doorhan Sliding 800 KIT is mounted on the gate at the entrance to the residential sector.
The Doorhan Sliding 800 drive has many advantages and technical features:
- The device is reliably protected from wear and overheating due to the location of the gearbox in the "oil bath".
- The equipment is able to withstand significant loads, including intensive operation during the day, which involves frequent opening / closing of the web.
- The built-in radio receiver allows you to connect up to 60 remote controls, providing convenient control of the fence from a distance.
- The presence of magnetic limit switches that determine the place where the blade stops, which prolongs the life of the equipment.
- Locking locks securely fix the door leaf after closing, which eliminates the need for additional installation of other locks.
- In the absence of power supply, Sliding 800 is unlocked using a personal key.
- The operation of the device is accompanied by minimal noise, the movement of the web occurs smoothly and without jerks.
- The control unit allows you to set the necessary parameters and modes of operation, regulate the closing of the fence, the course of the web, as well as connect additional devices and devices that expand functionality equipment for safer use.
- The device is mounted without using special equipment or welding work.
Price - 3 000 UAH per gram, available
Drive Doorhan Sliding 800, SL-800
Reliable electromechanical drive Doorhan Sliding 800 was designed to automate sliding gate with a maximum weight of the canvas with sheathing up to 800 kg. Best suited for residential sliding gates, such as country house, dacha, cottage, small parking lot or workshop. Intensity of use SL-800 is 50 percent, which is quite enough to service the average number of cars. Thanks to the introduction of new technologies, automation works stably from -40 to + 60 degrees.
The main part of the drive housing is made of high-strength duralumin and covered with a special layer with high corrosion protection. The main mechanical elements and the control unit are covered with a sealed plastic case. Also, the control unit is covered with a plastic cover and protects the electronic part from moisture and dust. Set Sliding 800 supplied with built-in PCB-SL control box. The PCB-SL is designed to be powered from a mains supply with unstable voltage. The control box is located in such a way that the wires are easy to connect, as well as access to the main settings is located on the top panel of the PCB-SL.
Externally drive SL-800 similar in design to FAAC 741, 740. Automation mounts are located on both sides in 4 places, which facilitates installation. Thoughtful design allows you to install and configure DoorHan drive in just a few hours. Like most modern automation in the drive Doorhan Sliding-800 several operating modes are provided - these are "Automatic mode", separate control "Open" and "Close" and "Open-Stop-Close-Stop". In automatic mode, the sliding gate leaf will close after a certain time, which is easy to set in the control unit, both during installation and after installation. Separate control provides for the presence of the operator, one press on the remote control and the gate opens, another press and the gate closes. The third mode also provides for the presence of an operator, but in this case, in order to gates stopped, you need to press the remote control again. In addition, the control unit can be configured working time, pause time and engine boost. The position of the gate in the open and closed state can be easily adjusted using magnetic non-contact limit switches. Also, to protect vehicles from damage, Doorhan Photocell safety photocells (receiver and transmitter) with a range of 25 meters are supplied in the kit. If you often turn off the electricity, the drive provides a system for transferring to manual mode, it is also called "Emergency Mode". Manual translation is made in the same style as automation FAAC. Translate to emergency mode it will be possible with the help of a special unique key, which is supplied in each set.
Specifications of Doorhan Sliding 800, SL-800
On the this moment there are 3 modifications of drives doorhan sliding- this is Sliding 800, Sliding 1300 and Sliding 2100. In this tutorial, we will look at drive SL-800. This drive is mains powered alternating current at 230 volts, while the power consumption is 250 watts, and the current consumption is 1 ampere. The gear ratio of the gearbox is 1 to 32. SL-800 Supports rail type M4x12,566 mm. The gear is metal Z16, and the maximum torque is 20-43 Nm. The maximum intensity of use is 50%, the maximum weight of the gate is 800 kg. The drive works reliably from -40 to +60 degrees. Capacitor built-in 10 uF.
Doorhan Sliding 800 drive kit, price, installation, repair
At the moment the drive kit Sliding 800 KIT comprises: drive unit with built-in PCB-SL control unit, M4 DHRACK racks (4 pieces), Doorhan Lamp, Photocell safety photocells, Keyswitch. The price of the complete set is 366 euros. You can order both a complete set and components separately from us. In addition, our company is engaged in the installation and repair of Doorhan actuators. Sliding 800.
You can download the installation, configuration and repair instructions on the same page
The company "Gate Systems - Dnepropetrovsk" offers products from all world manufacturers of movable enclosing structures in the following areas:
Garage and industrial gates sectional: doorhan Dorkhan (Russia), ALUTECH Alutech (Belarus), Hormann Hermann (Germany), Krispol Crispol (Poland), Ryterna Riterna (Lithuania), Kruzhik(Czech)
Roller blinds and roller shutters: doorhan Dorkhan (Russia), ALUTECH Alutech (Belarus)
Automation for gates and roller shutters: doorhan Dorkhan (Russia), Faac(Italy), CAME(Italy), Nice(Italy), Marantec(Germany), Sommer(Germany), somfy(Germany).
Barriers: doorhan(Russia), Faac(Italy), CAME(Italy), Nice(Italy)
Handling equipment: doorhan Dorkhan (Russia), Hormann Hermann (Germany)
Doorhan SLIDING-800 drive for sliding gates weighing up to 800 kg
Possible equipment of DOORHAN Sliding-800 automation
Set DOORHAN Sliding-800 minimum
DOORHAN Sliding-800 set max with safety accessories
The drive of this model is suitable for domestic or semi-industrial use.
In this article, I have tried to make it as short and accessible as possible. design features Sliding-800, as well as what you generally need to pay attention to when choosing automation.
- What does domestic and industrial purpose of the drive mean?
- Loads affecting the operation of automation
- Specifications of DOORHAN Sliding-800
- Drive Sliding-800
- Self-locking drive
- Control unit electronic board
- Embedded receiver
- Rack
- Remote control
- Magnetic limit switches
- Safety photocells
- signal lamp
- Buying automation from us
What does domestic and industrial purpose of the drive mean?
According to the purpose, the mechanisms are household, industrial, and also semi-industrial can also be distinguished. All of them are characterized by an indicator of the intensity of use - this is a characteristic of the possible time of work and the need for rest for a certain period of time.
Usually, drives with this indicator up to 40% are considered household, and those with it higher are semi- or industrial.
Sliding-800 automation can be described as a semi-industrial equipment that is able to serve the gates of private houses or small public parking lots where traffic flow is low.
To correctly determine what purpose the model is needed for your gate, I recommend contacting free consultation to one of our specialists.
The fact is that by buying automation above the necessary capabilities, you can overpay even more than twice, and by buying a drive less powerful than necessary, you risk getting equipment burned out from constant overloads.
Loads affecting the operation of automation
When moving the gate, the drive must, in normal mode (without overloads), overcome the following loads:
- Weight and length of the fold
- Tight gate move
- snow and ice
- wind pressure
Weight and length sash understandable load, which is constant. It should only be noted that the equipment passport indicates the maximum parameters of the gate, which cannot be used simultaneously, because they are inversely proportional. That is, the heavier the sash, the shorter its length should be, and vice versa.
Tight gate move. This load depends on the quality of the fittings. If there are distortions or wedging during the movement of the leaf, this leads to an increase in the resistance of the gate, due to which the drive will have to work with increased effort.
snow and ice. Fittings for low temperatures air may freeze and the automation will need additional effort to move the sash.
If there are various decorative elements(slats or niches), they can become places where snow will accumulate and ice will form, which will make the gate heavier.
wind pressure. When moving sliding gates, wind pressure is practically not transmitted to the drive, but still affects its operation.
The magnitude of these loads is difficult to foresee, and even more so to assemble into one whole, therefore our experts recommend lowering the specified parameters of the gate for equipment by 2-3 times so that the mechanism works without overloads.
Specifications of DOORHAN Sliding-800
The upper part of the drive housing is made of impact-resistant ABS plastic, and the lower part is made of powder-coated aluminum.
The case has an IP44 rating and protects all elements inside from dust and moisture.
For the convenience of making all connections to the control unit, a special hole is made in the lower part of the drive.
The outer gear that drives the rack is made of steel, but the drive gear of the gearbox is made of polymers, which is not the best technical solution for working in our climatic conditions.
The manufacturer indicates the temperature range for normal operation of the Sliding-800 from -200C to +550C, and in most of our regions the temperature may be higher or lower than these values.
At low temperatures, polymers become brittle and break, while at high temperatures they become soft and lose their shape under stress.
The Sliding-800 drive electric motor runs on 220V and has a power of 250W.
Self-locking drive
Sliding-800 is a self-locking mechanism that, after stopping, will not allow the leaf to be moved manually, so it is not important to install a lock to lock the gate.
Blocking occurs due to the fact that all gears gears are in constant contact with each other.
If it is necessary to remove the blocking and move the gate manually, for example, in case of a power outage, the release mechanism must be used.
For this you need:
- insert the key into the socket on the drive housing and turn it clockwise
- pull the special lever
- turn the key counterclockwise and remove it - the drive will be unlocked.
To return the equipment to automatic mode, the unlocking steps must be performed in reverse order.
Control unit electronic board
For stable operation of automation, the board has special filters to protect against electromagnetic interference.
On the board, all the terminals are signed, so connecting it yourself will not leave any difficulty. Also on the board there are special connectors for connecting additional elements(safety photocells, signal lamp).
The board has light indicators for visual control of the automation.
It is located at the top under the drive cover and is additionally protected by a special case from dust and condensate.
When it is necessary to make adjustments to the control board, there is no need to open its protective case, because all the fine adjustment knobs are brought out of it.
The board has a special additional connector for connecting an antenna, which increases the range of the remote control.
It has a resettable low resistance fuse. When an overload occurs, the resistance of the fuse rises, knocking down the current to a safe value.
When everything is back to normal, the fuse performs an independent restart and reduces its resistance.
In addition to a protective case against condensate and dust, the surface of the board is covered with a special varnish for greater safety.
The board is responsible for the following automation features:
- Automatic closing. The gate will close itself after the set time has elapsed.
- Inclusion of a reverse after exceeding the set effort. If the gate hits an obstacle and the motor is overloaded, the drive will move the leaf in the opposite direction.
- Wicket mode. You can stop and fix the gate, leaving any width for passage or passage.
- Start with increased effort. For the first two seconds, the drive works with increased power in order to move the gate without problems.
Embedded receiver
This electronic element built into the control board. The receiver receives signals from the remote control at a frequency of 433 MHz.
Up to 60 remotes can be registered for signal transmission.
Rack
Attached to down tube gate frame and moves them due to the receipt of torque from the outer gear of the drive, translating it into translational motion.
The rail is made of galvanized steel and is able to last a long time.
The length of the lath must correspond to the length of the sash (+ 1m), so it is supplied in one meter lengths.
Remote control
DOORHAN manufacturer offers two series of remote controls:
- Transmitter Series
- TW Series
Transmitter Series:
Transmitter-2- it can control two automatic devices(for example, automatic home gates and barriers in the parking lot).
Transmitter-4 and Transmitter Premium– these remote control models are able to control four automatic devices
TW Series:
TW1- single-channel remote control. Can control one automatic device.
TW2– two-channel remote control. Can control two automatic devices.
TW15- fifteen-channel remote control. Can control 15 automatic devices.
Magnetic limit switches
These elements are designed to stop the drive when the gate is maximally opened or closed.
Magnets with special brackets are mounted along the edges of the gear rack, and a reed sensor is installed inside the drive.
When the magnet is in front of the actuator, its field acts on the reed switch, which breaks the circuit, stopping the motor.
If we compare the magnetic system with the mechanical one, it should be noted that it is more expensive, but does not fail in winter period as is often the case with mechanics.
The point is that the mechanical system in cold weather, the spring on the drive to one of the switches can freeze, and the automation cannot be turned on, because the control unit will assume that the mechanical switch acts on the spring. Therefore, this node will have to be warmed up.
If there is snow on the surface of the toothed rack, then when the gate moves, the spring can rake it up until it is enough for it to bend and turn off the automation.
In this case, you will have to clean the gear rack with a broom.
Over time, the metal spring can rust from exposure to atmospheric cages and break, as a result of which the gate will not be able to stop.
Safety photocells
These elements are needed to avoid a possible hit of the gate against an obstacle - they detect it in advance.
The receiver and transmitter are attached to poles or mounted on racks, between which an infrared beam is formed, breaking it with an obstacle will serve as a signal to stop the gate and direct it in the opposite direction.
When installing photocells on posts, the obstacle will be detected earlier than their mounting on posts, because they are located at some distance from the gate.
Doorhan has three photocell models:
- Photocell-N
- Photocell-R
- Photocell W
Technical characteristics of photocells Photocell
Photocell-N scatter infrared beam at a distance of up to 20 meters at an angle of 7 °, so there is no need to install them in a strict horizon in relation to each other.
Photocell-R can be installed at different levels, and the excess can be corrected using turntables.
photocell l - the power is supplied by batteries, so they do not need to be wired.
signal lamp
It accompanies the movement of the gate with its flashing light signal. This element security especially useful in poor visibility.
Manufacturer Doorhan offers two models of lamps:
- Lamp-LED
Model Lamp Comes with a built-in antenna to increase the range of the remote control.
Model Lamp-LED It has LED elements that are durable and significantly reduce the lamp's power consumption.
Specifications of signal lamps
Buying automation from us
Buying automation in our company, you get:
- Possibility to test the drive recommended by us during the year. This means that during this time you use the equipment and you can return it, if you do not like something in it, we will return the money back.
- Choosing how to pay for the order - payment can be upon receipt of the equipment or prepayment
- Guaranteed service maintenance equipment recommended for purchase by our specialists throughout the entire period of operation.
