Mounting the plinth on liquid nails. All about fixing the plinth to the floor. Features of gluing on different ceiling surfaces

The plinth is designed to decorate the gaps between the flooring and the wall. In addition, it performs the function of protecting the edges from damage and hides defects.

The bar can be a simple straight line or may contain complex elements.

Fixing the plinth to the floor can be done in several ways:

using screws or nails;
on clips or anchor fastening;
applying glue to the back;
buy a self-adhesive skirting board for the floor.

Glue or liquid nails - reliable method that allows you to fix the bar securely without damaging it. This applies primarily wooden products, which can crack from hammer blows.

Liquid nails: the procedure for laying the plinth

Liquid nails are a great alternative to ordinary nails. Unlike the first ones, they do not spoil the surface, do not leave dents or marks. Securely fix the bar between the wall and the floor.

What is their advantage:

high-strength mounting adhesive;
quickly fixes fastened parts;
also suitable for natural wood and for artificial materials - plastic, MDF, ceramics.

They are applied to the surface using a special nozzle.

Preparing the skirting board for liquid nails

Before gluing the skirting board to the floor, you need to make sure that its surface is clean. For this you should use sandpaper and walk lightly back side planks.

Note!
It is better to buy universal liquid nails that are suitable for any material.
They can also be used in conditions high humidity and continue to firmly hold the parts under sudden temperature changes.

Except liquid nails water-resistant glue 88 is also used.

It is easy to use and has such advantages as:

High quality bonding;
The seam is elastic and moisture resistant;
Does not contain toluene - not harmful to humans and animals;
Adhesive for floor or ceiling plinth remains sticky for a long time, which allows you to work with it for a long time without fear that it will dry out at the wrong time.

Installation steps

Tools:

hacksaw;
roulette;
hammer;
a bottle with liquid nails and a nozzle for it;
miter box;
rubber spatula.

Instructions for laying skirting boards with liquid nails:

Measure the perimeter of the room, taking into account all the ledges and niches;
Calculate the amount of necessary building materials;
Buy cylinders with glue;
Cut the plinth into pieces of the required length.

Note!
45◦ for joining at external and internal corners.
Before sawing off the second part, it must be compared with the first so that there is no gap at the junction.

Apply liquid nails, if the baseboard is narrow, then drop by drop with an interval of 5-10 cm, if wide, then in a zigzag. This guarantees the strength of the fastening.

The longest segment is laid first, starting from the corner. The wall must be absolutely flat, otherwise the plinth will swell.
Immediately after applying the adhesive, the plank is pressed tightly against the wall. In this position, it must be held for some time for high-quality fixation. Usually about 10-15 minutes.

It must be borne in mind that in the event of dismantling, the plinth will be deformed. It cannot be reused.

The same applies to changing wallpapers, if a decision is made to change them, and the bar is glued on top of them, then it will have to be removed.

If during installation part of the adhesive came out, then it should be removed with a rubber spatula. And wipe the front side of the plinth with a cloth soaked in water.
All seams and joints are filled with liquid nails and carefully leveled with the same rubber spatula.

Characteristics of the self-adhesive skirting board

The self-adhesive floor skirting board was created especially for those who want to carry out repairs quickly, easily and without extra dirt. It appeared on the market more than 5 years ago and is suitable for interior design with flooring made of laminate and linoleum.

Characteristics:

It is made of soft PVC or aluminum. It is of interest for large spacious premises, residential or office. It can be mounted on almost any flat surface. The self-adhesive skirting board is made in a variety of colors, for example, with wood imitation.
It is characterized by the ability not only to bend, but to join like a regular plinth with the help of connecting elements. Aluminum is glued to the surface using mounting tape or double-sided adhesive tape.
When working with a self-adhesive skirting board, it is important to mark the places where it will be fixed. Since it is very difficult to tear it off without damaging the surface of the wall or itself.
The care of this building and finishing element is simple - it can be washed with plain water with a liquid or cream detergent. Its surface is protected by an oxide film, which protects the skirting board from damage.
Soft skirting tape helps protect walls from damage during cleaning.
During installation, there are practically no scraps left - you can save.
Easy to install at any angle.
The price of a flexible skirting board is lower than its hard counterparts.

Work with self-adhesive soft PVC skirting board

If you know how to glue the skirting board on the floor, you can greatly facilitate the repair process. To begin with, it is important to clean the surface where it will fit from grease, dirt or dust. To do this, you can wipe with a damp cloth soaked in water or, if the coating allows, then in gasoline.

Stages of work:

With your own hands, try to carefully remove the protective tape from one edge, having previously marked the places where the plinth will be glued.
Next, starting from the corner, carefully lean the skirting board against the wall, while pressing it down for better adhesion.
Make sure that the tape is laid flat and does not move.

The soft plinth is convenient because it already has an adhesive base for installation. No additional funds are required.

Conclusion

With the advent of glue and liquid nails, laying skirting boards has become much easier. The amount of waste has decreased, the risk of cracking the plank due to driving in nails or driving screws has decreased. In addition, the number of tools for work and the time spent on work have decreased.

In this article we will talk about the choice of adhesive solutions for decorative items from pvc, polyurethane, polystyrene and other plastics designed to decorate our home and give it individuality.

Installation is carried out on adhesive solutions, of which there are currently a great many. Let's try to consider various options and make the right choice.

Below are comparative characteristics various compositions.

If the images are too small, in order to read the instructions for a particular adhesive, click on the picture.

Mounting adhesive "liquid nails"

Liquid Nails, Makroflex, Moment of Installation Express Decor. Can be matched to almost all types of skirting boards. There are water-soluble (acrylic) and non-water-soluble. For curved surfaces, it is better to use non-water-soluble reinforced compounds.

Pros: ease of applying the solution pointwise using mounting gun; additional fixation may be required only for highly deformable parts.

Minuses: if the glue comes out somewhere on the fillet, it is impossible to remove it without leaving a stain. Only paint will help. Therefore, when buying, pay attention to the color (white).

Mounting adhesive Titan (Titan Wild)

Composition: solution of polyvinyl acetate in organic solvents. A colorless glue that is very popular because it sticks almost anything, yet is affordable and ubiquitous.

Pros: All of the above + quite strong and reliable.

Minuses: inconvenient to use, “stretches” with threads, a tediously long curing process involves fixing the parts to be glued to the surface.

Specialized acrylic adhesive

Adefix P5, TYTAN Professional, styrene- acrylic adhesive TITAN wild. These acrylic dispersions are specially designed for mounting decorative elements.

Pros: easy to apply, protruding glue can immediately close up gaps.

Minuses: they are not sold everywhere, if acrylic glue is in a bucket, then you have to work with a spatula.

Styrope adhesive Titan Wild TITAN Wild

Advantages and disadvantages unfortunately not yet known.

Putties

Many craftsmen prefer to install fillets on putty mortars. It is better to choose solutions with increased viscosity, then it is not necessary to additionally fix the plinth to the surface.

Pros: protruding putty, you can immediately close up the cracks.

Minuses: not the fact that it will not fall off over time. When dismantled, this becomes especially clear.

Acrylic sealant

The main purpose of sealants is filling cracks and seams. Acrylic sealants great for sealing gaps after installing a ceiling skirting board, but not suitable for gluing the skirting board itself. Although many think the opposite. Nowhere in the manufacturer's recommendations is it mentioned that something can be glued to the sealant.

Installing a ceiling plinth How to close the gap between the bathroom and the wall, between the wall and the washing machine Installation plastic corners
Sealant joints and seams after installation plastic windows
How to hang a TV on the wall

23770 0 4

How to glue skirting boards on the floor: 3 easy ways

During the repair, sooner or later it comes to fixing the skirting boards to the floor, and then the question automatically arises, in what way is it better and easier to do it? The choice of type of fastening depends on many factors, including the evenness of the walls and the material from which the plinth is made. Wooden and plastic elements are more convenient for me, and it is easier to fix them with liquid nails or glue.

Advantages and disadvantages of this type of fastening skirting boards

A skirting board is needed to hide and decorate the gaps between the wall and floor coverings. This element to some extent protects the edges of the coating from damage, gives the room a finished look.

There are several ways to attach skirting boards:

fastening with nails or screws;
clip or anchor fastening;
the use of adhesives;
use self-adhesive .

Among the options listed, for me the most convenient and fast way is to fix the skirting board with liquid nails or good quality glue. This option allows you to securely fix the elements in the right place and avoid damage to the structure.

Note!
Fixation wooden skirting boards with the help of adhesives requires the fulfillment of one main condition: the surface of the adjacent wall must be perfectly flat.
If you close your eyes to this condition, the wooden elements will fix very poorly and may soon fall off.

I find a huge plus of adhesives that their use does not affect the surface of the finishing material in any way (there are no abrasions and dents, as in the case of a hammer and nails).

In addition, the following advantages of using adhesives for fixing skirting boards can be distinguished:

high-quality adhesive fastening base provides excellent connection of the surface of the walls and;
fast connection of parts;
the possibility of using adhesive mass (liquid nails) with any materials: from natural stone and wood to elements of synthetic origin, such as plastic and ceramics;
the ability to install skirting boards even in rooms with loose walls;
the ability to use adhesive fasteners in any room of a residential building, from the corridor and living room, ending with the toilet and bathroom.

The disadvantages of this method of attaching decorative elements, I identified the following points:

the need to level the surface of the walls to an ideal state (relevant in the case of wooden elements);
a large number of time waiting for the adhesion of each element (relevant in the case of using an adhesive of unsuitable quality).

The procedure for gluing skirting boards

Liquid nails are often used to fix skirting boards, but so that the result of the connection does not cause unpleasant emotions, I advise you to choose universal composition. It is suitable for bonding any materials.

Advice!
If it is not possible to purchase universal liquid nails, I recommend that you replace this compound with 88 glue, which is not only waterproof, but also has many other useful qualities.
The price of this adhesive is about 80 hryvnia for 0.8 liters (220-260 hryvnia for 3 liters).

In that waterproof adhesive 88 I found the following advantages:

easy to use;
forms a high quality bond;
the seam is waterproof and elastic;
suitable for any elements made of both natural and synthetic material.

I suggest several good options how to glue the baseboard on the floor:

liquid nails brand TYTAN (price about 60 UAH);
liquid nails from the manufacturer ANTIA (they cost about 75-85 UAH);
glue 88;
glue "Moment";
glue "Titan";
glue "Dragon".

1 way - installation of wooden skirting boards

All manipulations for installing the plinth on the floor should begin with the acquisition / preparation necessary tools and cutting the material itself.

In the process of preparing skirting boards and their installation, the following devices are needed:

roulette;
hacksaw;
rubber spatula;
a tube of liquid nails and a special nozzle for them (or glue with a special gun for applying).

Note!
If re-gluing the wallpaper in the room is just around the corner, then with the installation of decorative wooden elements better not to hurry.
The fact is that it is impossible to replace the wallpaper without affecting the baseboard, so the latter should be installed only at the end of the repair.

Before gluing the skirting boards to the floor, we clean the surface of the walls and floor from dirt and dust, and it will not be superfluous to degrease them. These manipulations allow the planks to hold better.

Now we are preparing decorative elements:

We measure the perimeter of the room, taking into account all the recesses and protrusions. Using these data, we calculate the footage and the most accurate number of decorative elements.
Cut the plinth into pieces of the desired size.
When creating external and internal corners, elements are cut at an angle of 45 °. When the first half of the corner is cut out, we attach the second part to it and try to saw it off so that the corner resulting from the connection of the two panels does not form a gap.

After all the elements are cut out and ready for installation, we confidently move on to the main part of the work with decorative elements.

To stick everything correctly and avoid mistakes, step-by-step instructions will help:

We buy adhesive.
Now we proceed to apply the adhesive to the surface of the panel, which will be in contact with the floor and wall. If you need to work with a narrow element, apply the composition pointwise, in a small drop, at a distance of about 5 cm from each other. But for wide elements, the point method is ineffective, and the adhesive must be applied in waves, which will make the connection stronger.

We start gluing the decorative element to the floor from the corner. We take the longest segment, which is intended for the corner.

Note!
The wall to which we will attach wood panel with the help of an adhesive composition, it must be perfectly even.
If we do not align the walls, the panel will stick in waves, and over time it will swell and fall off, even if the most durable and high-quality glue was used for fastening.

We apply adhesive to the plinth and press it firmly against the wall. We hold the panel in this position for a while so that it is well fixed and does not move from its place. Fifteen minutes will be more than enough, and if you use good liquid nails, then after this period of time the panel will stick well and it will be impossible to tear it off.
We apply the composition to the next wooden element and glue it near the first one.
We continue to glue the rest of the elements in turn.

Advice!
If, when installing the planks, a little adhesive gets on their surface, immediately clean the outside of the elements with a cloth or rubber spatula.
After that, immediately wipe the outer surface of the plinth with a damp sponge so that the hardened glue residue does not spoil appearance wooden elements.

The seams obtained during the joining of the elements are filled with an adhesive composition. It is most convenient for me to do this with a small rubber spatula.

2 way - installation of plastic skirting boards

The installation of PVC (plastic) panels differs from the installation of wooden elements primarily in the calculation feature the exact amount required material. The required number of plastic panels is determined not with the help of a tape measure, but with the bar itself with a corner attached to it. This saves a lot of time building material and, of course, nerves.

When fastening thin PVC panels, drops of adhesive at a distance of 10 cm from each other are only permissible if the wall surface is completely perfect. If they have a short length, minor errors in level, a lot of contours - we reduce the distance between the drops of the adhesive composition up to 3-4 cm.

Let's take a closer look at how to glue the baseboard to the floor:

We clean the surface of the walls and floor from dust or other contaminants.
We take the plinth from the side of the corner and apply an adhesive to its inner surface. Depending on the width of the plastic panel, we apply it in the most appropriate way (dotted or wavy).
We use special connections between the individual elements of the panels. For strength and reliability of fastening, we also put them on glue.

Note!
If the panel consists of two parts, which are interconnected by latches, we put only the main part on the glue.

We continue to mount decorative elements for the PVC floor in the same spirit. We install fasteners for the inner and outer corners as tightly as possible so that in the future they do not pop out and do not have to be put on glue.
At the end of the installation of the panels, wipe them with a damp sponge so that there are no stains from the glue.

3 way - using a self-adhesive plinth

Such panels are very easy to use and allow you to complete repairs with your own hands in a very short period of time. This material appeared about 5 years ago and is ideal for decorating rooms with flooring from linoleum or laminate.

Modern models are produced in various color scheme and have many color options, so they are suitable even for rooms with a tiled or stone floor.

I consider the features of a self-adhesive skirting board to be:

production of panels only from aluminum or soft PVC;
the possibility of its easy use in large rooms;

the ability to glue the panel on almost any flat surface;
rich colors of such planks, some even imitate a natural stone, tree, etc.;
the ability to glue the panel in difficult places not only by bending, but also by fixing it with standard elements for connecting skirting boards.

To figure out how to properly glue such skirting boards to the floor, this simple step-by-step instruction can help:

Dip a cloth in water and twist it out to keep it slightly damp.
Thoroughly clean the surface where the panel should be glued from dust and dirt.
Degrease the surface. I use 95% alcohol for this. If desired, it can be replaced with another composition.
Take decorative tape and carefully remove protective layer On the one side.
We make markings for gluing and fit the end of the tape to the corner.

Advice!
When fixing a self-adhesive panel, it is very important to know exactly where it will be attached.
To do this, we mark the level of gluing, because if the tape is applied incorrectly, it will not be possible to tear it off without damaging the floor and wall covering.

In the process of gluing, we press the flexible tape a little against the wall and floor so that the adhesion goes better.

We make sure that the self-adhesive panel is laid evenly and does not change its direction.
We glue the material around the entire perimeter. Cut off the ends of the tape.

Such finishing material it is also very easy to clean, because after installation it can be washed with a soft sponge dipped in plain water. Often the surface of such panels is protected by a special oxide film, which minimizes the effect of various damages.

The installation of this part practically does not need trimming, it can be used to glue any corner. For me, this material is very convenient due to the presence of an adhesive mounting base on it, so there is no need to use any other adhesives. This replacement of solid floor panels allows me to decorate any room and save a lot on tools and materials.

Conclusion

Now you know how to properly glue floor plinths with your own hands. If you want to keep the result for a long time and forget about repairs for several years, choose products good quality. I recommend applying this rule not only to adhesives, but also to the panels themselves.

Installing skirting boards with liquid nails or good glue this procedure is greatly simplified, and the use of self-adhesive tape allows you to complete the repair even faster. More about everything in the video in this article. If you have questions - write them in the comments.

To many who have not encountered finishing work, it seems that all the talk about how to glue ceiling plinth- this is a simple waste of time, because this process is not difficult. But one has only to collide, and it turns out that the work requires heightened attention. It is impossible to install fillets if their features are not taken into account, there is no clear action plan, and the composition for fixing is not defined. If all this is not taken into account, then the consequences will be very sad: fragments will begin to fall off, cracks will appear in the joints, incorrectly formed corners will spoil the whole appearance.

foam profile

Foam fillets are rightfully considered the most popular, because they are available to the majority of the population, while endowed with excellent qualities and appearance. In addition, they have a number of other advantages:

They are light in weight making them suitable for stretch ceilings, as well as perform work without the involvement of additional forces.
Easy to process, which reduces the time required for installation.
If required, the surface can be repeatedly painted, and this creates endless possibilities for design solutions.

Also, we must not forget that this type of fillet has negative qualities, which are associated with the fact that the products have a high fragility and are easily damaged.

In addition, it is this option that has the most restrictions on the use of fixing compounds. When deciding how to glue the foam skirting board to the ceiling, take into account that the adhesive solutions used should not contain any solvents in their composition. The fact is that their presence is a direct path to the complete deformation of parts that literally dissolve from the impact of this substance.

PVC profile

This type of fillet is a product that is made of polyvinyl chloride. And to put it simply, it's just plastic. PVC profile most often used in the case of wall cladding plastic panels. But this is an optional condition.

Polyvinyl chloride fillets have the following advantages:

Quite cheap, although this parameter is much higher than that of foam products.
They have an abundance of colors and imitations. If necessary, you can pick up details that will repeat the natural cut of wood or stone.
Immune to moisture. According to this indicator, they are superior to polyurethane.

For gluing, universal adhesives are used, which are marked as suitable for PVC. Although plastic has impressive qualities, it cannot be stained, which is an important consideration.

wooden profile

The widespread use of wooden fillets is on the wane. It contributes to:

The cost of the material. At the same time, we are not talking about rare breeds; even widespread species have a high cost. Of course, in specialized construction stores you can also find inexpensive wood baguettes, but they are of very low quality.
Not the easiest procedure. To perfectly fit the parts, they must be laid on a flat surface, and trimming must be done very carefully. The resulting defects are very difficult to hide under a layer of putty.
Installation is a series of labor-intensive procedures. Before gluing the ceiling plinth, you should decide whether this will happen through putty or glue. The first option is often preferred. Further, additional fixation measures are carried out - on self-tapping screws, dowels or nails, the choice of fasteners depends on the base.

Of course, a wooden fillet is a real luxury. It is she who is able to give the room a certain aristocratic look. It is important to consider that walls lined with clapboard, wood panels cannot look good without such an element. Attempts to replace the profile modern version will lead to the fact that the interior will lose its appearance.

On a note! Gypsum varieties are also becoming less popular. They have an unsurpassed appearance. But many synthetic products began to copy this feature. In addition, stucco stickers are only possible on a gypsum solution.

Sticking according to product width

It is impossible to talk about how to glue a ceiling plinth with your own hands with high quality, if you do not take into account its width. This indicator directly affects the sticker technology and general form premises. The following features are taken into account:

Wide details are great for rooms with high ceilings, because they visually reduce their height. To obtain a secure fixation, the composition is applied along the entire wrong side, this will prevent the glued elements from falling off.
Fillets that are small in width are an excellent solution when ceilings need to be visually raised. Fastening is carried out pointwise if light products are used.
Fragments of medium width are considered the most acceptable; they are used everywhere. It is possible to glue ceiling skirting boards of this size by all known methods.

On a note! The appearance of the product is of great importance during installation. So, fully processed, painted, textured elements need a very careful application of adhesives. The fact is that their contact with the front side can lead to the fact that the fillet will be irrevocably damaged.

Sticking with design

Particular attention must be paid external features fillets. Thus, the color of the elements can visually change the perception of the room. For example, if shades decorative details and the walls match, the room will seem much smaller.

But then how to stick the ceiling plinth correctly, given the shape of the product? For this, there are a number of simple recommendations:

The drawing should be selected taking into account what style will dominate the interior. So, classic variations suggest that baguettes will have a complex texture, patterns that resemble stucco. Modern minimalism strives for simplicity, so thin fillets are suitable for it, the ornament on which is absent or has a clear geometry.
with three-dimensional figures it is better to use for plain surfaces. This option greatly aggravates the atmosphere, so it is categorically not suitable for small rooms.
To achieve harmony, the pattern must be combined with the walls or ceiling. This will make the transition the smoothest.

Create the most harmonious interior obtained by combining the fillet pattern with walls or ceiling

On a note! Performing work with baguettes that have complex shape and texture, take into account that these parts are very difficult to adjust in the corners. Therefore, it is better for them to purchase special corner pads.

Basic mounting methods

Exist various ways, which are used when gluing ceiling plinths. So it is customary to distinguish two main technologies that allow you to mount the most popular product options: polyurethane and foam.

Method One - Using Putty

This option is great for situations in which wallpapering has not yet been completed. Many masters rightly consider this method the most acceptable. The fact is that the untreated surface allows you to achieve the best grip.

Preparation

To work, you will need the following set of materials:

Fillet directly. It is very convenient that this method is universal practical for all varieties.
Putty. For the process, the most common mixture is used, which is widely sold in stores, you can use the remnants of a previous repair. It is important to pay attention to the expiration date and integrity of the substance. If the material does not have friability, then it is rejected.
On a note! Can be selected to work gypsum composition. But it has one big disadvantage - fast setting. This limits the time of use of the solution, and also does not make it possible to correct the defects that have arisen.
Priming. It is applied to increase adhesion of surfaces. It is better to choose compositions with deep penetration.

For gluing the ceiling plinth, the necessary set of tools is selected:

Trimming of parts is carried out using an ordinary hacksaw for metal. You need to use a clerical knife only when the width of the elements does not exceed two centimeters, otherwise the quality will not be as it was intended.
To form an angle, they resort to the services of a primitive, but very effective adaptation- miter box.
For applying putty, a spatula of medium width is suitable - 8-10 cm.
It often happens that the surface of the fillets has a very noticeable roughness, which prevents high-quality work. It is removed with sandpaper.

Before fixing the plinth, the presence of all materials and tools is checked. The work is much more efficient when there is no need to search for the necessary devices in the process of its implementation.

Fixation

Fillets are glued according to a certain scheme, which consists of several stages. It should be borne in mind that when performing work, all actions are adapted to a specific situation.

Stage one:

It all starts with an inspection of the area where the baguette will be installed. Happens often, especially after doing finishing that small defects, irregularities remain on the surface. To remove them, sandpaper is used, which is fixed on a special bar. Of course, it is better to do such preparatory work in advance.
Walls and ceiling are treated with a primer. It is important to consider that even this composition needs preparation. The simplest option is conventional mixing, but if a concentrate is used, it must be properly diluted. Further procedures can be carried out only after the surface has completely dried.
Marking is required. The easiest way is that the part is applied to the right place. A line is drawn exactly along the edge, which will serve as a guide.

Wall surface marking

Many craftsmen advise measuring the length of fillets in advance. That is, measurements of all sections are taken, fragments are calculated. It is much more convenient to draw a diagram on a piece of paper. It is possible to skip this step, in which case the markup will have to be done on a per-element basis when committing directly.
Parts are trimmed. This process can cause many problems. Especially carefully you need to work with foam, which easily crumbles from improper exposure. To form corners - use a miter box. It is better to practice a little to determine the correct location of the products in this tool.

Cutting skirting at an angle

Stage two:

The installation of the ceiling plinth begins with the preparation of the putty mixture. It should be noted that it is kneaded immediately before work in order to exclude the loss of the properties of the finished solution. This process is quite simple: a dry substance is poured into a container, which is diluted with the right amount of water. You should get a thick and well-mixed composition.

Advice! It is important to exclude the appearance of lumps or dry residue in the mixture. Therefore, it is recommended to add water first, and then add putty. Each manufacturer places instructions on the label, which must be strictly followed.

Now comes the most crucial moment - fixation. To do this, using a spatula, a small amount of the prepared solution is collected. It is evenly distributed over the entire surface of the baguette, which will directly interact with the ceiling and walls. This procedure is not complicated, but care must be taken that the excess does not fall on the front.

Installation starts from one of the corners. It is believed that it is better to choose for this area, which is in the field of constant visibility. But before sticking the ceiling plinth, check that the applied mixture is not too much. Otherwise, there will be too many residues that will be difficult to handle.
The part is pressed to a given place. Exactly at this moment those lines that were previously applied will come in handy. They verify the correct installation. There is no need to press too hard, fresh mortar allows you to fix the element very quickly. In any case, excess mixture will appear from under the edges. While the solution is not frozen - it is removed.

Advice! Removing excess is not always advisable. It often happens that there are minor irregularities on the surface, in which case the putty fills them perfectly. Thus, the edges of the fillet are formed, which do not have any defects.

When attaching the second fragment, a natural question arises: how to dock the ceiling plinth correctly? Many admit typical mistake- forget to apply the solution directly to the end part. The mixture requires a small amount so that the excess is completely absent or minimal. The product is pressed into place, combined with the first element. It is important to achieve a perfect match, because any distortions will be evident.

Each glued part must be installed clearly along the line. It takes time for the material to adhere well and dry completely. This takes about a day. Further work is that possible flaws caused by the remnants of the mixture are cleaned. If necessary, the fillets are primed and coated with paint. To avoid staining adjacent surfaces, masking tape is glued along the edges of the ceiling plinth.

On a note! When work is carried out with fillets, which are highly fragile, pressing is carried out with the back of the hand, without a point stop. This will help avoid dents.

Method two - the use of glue

This option is usually used when you need to glue the ceiling plinth on the wallpaper. Although this does not mean that it cannot be used on bare walls. An important condition in this case is that the wallpaper must be glued very securely, because you can diligently and accurately install fillets, but due to defects in the main coating, they will begin to lag behind the wall.

Installation of a ceiling plinth with glue can be done on top of the finish: painting or wallpapering

Adhesive selection

Before gluing skirting boards, you need to make a choice adhesive composition. Currently, there are many options that are suitable for such a task. So, among the whole variety, the following stand out:

Universal Substances. This category includes solutions that have a very viscous and transparent mass, which hardens for a very long time. The most popular options are called "Titan". These products are recommended for working with polystyrene and its varieties, suitable for any foam materials. But using them is quite inconvenient: they are applied to the surface for a long time, while the fixation is not always of high quality, you have to hold the parts for several minutes.
Liquid Nails. These are very convenient compositions, to which many masters give an unconditional palm. Produced in tubes for a construction pistol. But when choosing this option, it must be borne in mind that the composition must have an inscription confirming that it can be used with polystyrene foam products.
acrylic sealant. Enough original solution, which helps to find a way out when it is not possible to purchase one of the above materials. But in this case, it is very important to choose proven formulations.

Fixation

Now you need to figure out how to properly glue the ceiling plinth on the glue. The instruction is:

The surface is being prepared. It must be carefully inspected for any irregularities or defects. If there are any, then they are completely eliminated. This is required so that the strips are pressed tightly, and also there are no strong distortions.
Marking is carried out, details are prepared. It is better not to neglect this procedure, it allows you to work better.
Next, proceed to the application of the adhesive composition. It is most convenient to distribute it in the center of areas adjacent to the surface.

Details are applied to a given area and pressed. It is important to follow the instructions that each glue has. So, different types compositions require a different approach: retention, tearing off and new gluing. It is better to strictly adhere to the specified scheme.
Advice! It is these parameters that you should pay attention to before buying. They help to understand how to glue the ceiling plinth most quickly.
The remaining elements are stacked. After that, the fillets are left until complete fixation. This time is determined by the composition used. If there are gaps, then they are covered with sealant. Joints are also sealed, which are not always possible to fit closely.

Eliminate gaps with sealant

When it is necessary to correct a large number of defects, it is better to carry out subsequent staining. It will help hide conspicuous flaws.

Indeed, glue helps to significantly reduce the time it takes to work, but it is important to take into account the characteristics of each composition.

Currently, many popular solutions have similar names, but differ in manufacturer. Therefore, the manufacturer is the main indicator of quality.

Correct formation of corner and intermediate joints

It is this procedure that causes the most problems: it is enough to make a little mistake to irrevocably spoil the workpiece. Therefore, it is impossible to talk about how to properly glue skirting boards on the ceiling if there is no concept of the formation of joints.

So here are a few tips to help you in this situation:

For such work, a miter box is used, which has a set of stencils at different angles. To make a 90-degree angle, you need to trim two parts at 45-degree angles.
The inner corner is obtained if the fillet is placed pressed against the bottom and side of the miter box. In this case, the surface of the part that will be adjacent to the ceiling should be located on the bottom of the tool.
To get the left angle vector - the element is located on the same side, and the knife must enter the stencil from right to left. If you need to get the right vector, then everything is done the other way around.
But how to glue the plinth on the ceiling when you need to get outer corner? In such a situation, the cut must be directed differently. That is, to obtain the right vector, you need to position the knife from right to left.

If there is no miter box at hand, you can resort to creating a stencil with your own hands. To do this, the baguette is placed on the table, on which two lines are marked corresponding to its width. So, for example, with a fillet width of 80 mm, both lines will be located at exactly this distance. A square is drawn between them, which should have all sides of 80 mm. It has diagonals. They will form an angle of 45 degrees. Now it remains only to attach the part to the desired side and cut it off. This option is bad because the fragments are difficult to fix, any shift can lead to the fact that the angle will turn out to be uneven.

Fixing the ceiling plinth is complicated by intermediate joints. There are several recommendations:

Plaster and foam baguettes are best laid at right angles, especially when using putty. It should be noted that a thin layer of solution is applied to the joint of the second (next) element.
Trouble may arise if the edges are damaged. Then it is necessary to cut the part so that it is possible to form a complete pattern in two fragments.
Polyurethane products need more attention, their joint is better when it is made at an angle. The bias seam will be less conspicuous.

Indeed, trimming corners is not the easiest task that requires concentration and care. To better understand the whole process, we suggest watching the video below.

Features of gluing on different ceiling surfaces

Difficulties also arise when there is no proper idea of how to glue baguettes on a ceiling made of different materials. It is wrong to assume that different surfaces need exactly the same approach.

Stretch ceiling

This option is very popular. This is easy to explain, because it is possible very quickly and without much effort to get a flat surface, which can have various design. It is important to consider one feature when choosing a fillet for such a coating: the side of the part that will face the ceiling remains without adhesive. That is, fixing is carried out directly on the wall. Therefore, products must have the following qualities:

Light weight. In this case, foam, polystyrene foam, plastic and some types of polyurethane are suitable. At the same time, we glue the ceiling plinth onto compounds that have a quick and reliable fixation.
The side facing the ceiling should be smaller than the side facing the wall.
To install wooden baguettes, you will need additional support points. It can be: dowels, hidden anchors.

Designers advise choosing PVC products, they are best in harmony with tension structures.

GKL ceilings

How to glue a skirting board on a drywall surface? This is a fairly simple procedure, because the base is almost perfect. A little attention should be paid to the joints of the GCR boards, because they may contain remnants of putty. Any irregularities can be easily removed with sandpaper.

On a note! Any fillets are suitable for such surfaces. But it should be borne in mind that the use of drywall leads to the fact that the size of the room is reduced, especially when mounted on a frame. Therefore, the designers came up with an excellent solution - to place the wider side of the baguettes on the ceiling, which visually enlarges the room.

plastered ceilings

Such surfaces have their drawbacks. Therefore, before installing the ceiling plinth on a plastered ceiling or wall, their evenness is checked. If the defects are small, then there is no need to eliminate them. For this case, fillets with soft edges can be used, which will not create very noticeable irregularities.

Summarizing the above, it becomes extremely clear that the installation of baguettes requires a proper attitude. All the talk about how to quickly glue the skirting boards to the ceiling, but maintain the quality, does not make sense, since this is a guarantee that the desired effect will not be achieved.

All photos from the article

The final chord of any repair is installation, curbs, moldings and more. At this stage, inexperienced craftsmen usually have a question about how to fix the skirting boards, especially if they are made of plastic. Great solution is the use of so-called liquid nails, the only thing in this case is to strictly observe the installation technology.

General information

Skirting boards are a necessary element of any room. Without them, even the most expensive wall and floor decoration is unlikely to look presentable. Moreover, floor fillets perform not only a decorative, but also a practical function - they hide the gap between the floor and the wall, and also protect the edges of the floor from damage. Therefore, the fastening of this element must be approached responsibly.

It should be noted that installation can be carried out in several ways:

Mounting method	Peculiarities
On nails	This option is optimal for wooden skirting boards. The only thing before you nail them to the wall or floor is to bite off the nail heads.
On dowel-nails	A dowel nail for a plinth can be used in cases where the latter has special holes, which are subsequently covered with decorative overlays.
On clips	This method is also suitable only for certain fillet models. The principle of this installation is that special clips are attached to the wall, and then the plinth snaps onto them.
For liquid nails	It is used in cases where none of the above methods is suitable, and is also a good alternative.

I must say that the simplest fastening option is just the use of liquid nails, which are nothing more than quick-setting glue. Due to this, during the installation process, the possibility of mechanical damage to the finish or the skirting boards themselves is excluded.

Note! Many novice craftsmen are wondering if it is possible to glue this method with liquid nails only for plastic? Such a mount is universal, therefore it can be used for decorative products made of any materials.

In addition, this method of installation has some other advantages:

good fastening strength;
provides high speed installation;
the possibility of using the adhesive composition even in conditions of high humidity;
ease of fastening;
affordable price of adhesive composition;
the seam is elastic and waterproof.

Note! You can use liquid nails only if the walls are perfectly even. Otherwise, the fillets will be glued in waves, and over time they will begin to swell and lag behind. And this will happen even if you use the strongest glue.

Thus, the advantages of using liquid nails are obvious.

Application technology

Tools

Before you begin to work with your own hands, you need to prepare the following set of tools:

roulette;
hacksaw;
liquid nails for floor plinths with a nozzle gun;
hammer;
rubber spatula.

In addition, it is desirable to have a miter box that will simplify the process of cutting fillets for corner connections. If such a tool is not available, you can make a template in advance to quickly and accurately markup.

Note! The adhesive must match the material. For example, if you plan to mount plastic skirting boards on liquid nails, you should use glue for plastic or a universal compound that is suitable for all materials.

Preparation

It is necessary to start work with the following preparatory work:

first of all, you need to measure all the walls of the room, including protrusions and recesses, and then mark the baseboards;
then the edges of the strips are cut at 45 degrees for corner joints;
the back side of the slats must be sanded to get a rough surface;
to make sure that fillets can be fixed, you should check how clean the surface of the floor and wall is. It must be free of dust or other contaminants.

Advice! If you do not want to bother with the installation of skirting boards for a long time, you can purchase self-adhesive fillets. The installation process takes even less time.

At this stage, the preparation of materials is completed, now you can proceed directly to the installation.

Fastening fillets

Instructions for fixing skirting boards look like this:

work should begin with the longest bar, which is adjacent to the corner. At this stage, it is important to correctly apply the adhesive to the surface.

If the product is narrow, then the glue is applied in drops in increments of 5-10 centimeters. If the bar is wide, the adhesive must be applied in a zigzag pattern, which will ensure maximum bond strength. However, there should not be too much glue so that it does not come to the surface;

In the photo - gluing the plinth

immediately after applying the adhesive, the product must be pressed against the wall and held in such a position for some time so that the composition “grabs”. As a rule, already after 15 minutes the plinth cannot be torn off;
all other fillets are attached in the same way.

Note! After applying the glued baseboard to the wall, it cannot be reused, even if you remove it before the adhesive has set. Therefore, it is first necessary to outline the position of the bar.

This completes the work. As we can see, the greatest difficulty in this operation is the preparation of materials, which is performed almost the same, regardless of the method of fastening. The installation itself takes a minimum of time and effort.

Conclusion

The use of liquid nails is the most in a simple way installation of skirting boards. The only thing is that for this it is necessary to carefully prepare the surfaces, as well as avoid rework. After all, as mentioned above, it will not work to reuse fillets.

The video in this article contains additional information on the topic. If the process of installing skirting boards caused you questions, you can ask them in the comments, and we will be happy to answer them.