Homemade bath screen. Video: Manufacturing technology. Screen made of plastic lining

The screen is not a necessary part of the bathtub, but it can be used to block communications and other unsightly “views” under the bathtub. In our article we will look at how you can make this design yourself, because in some non-standard situations it is simply impossible to purchase a screen that is suitable in shape and size.

Why should you cover the bathtub with a screen?

WITH modern baths The kit usually comes with screens that are suitable for all parameters - installation of such a design will not take even an hour. But if we are talking about steel or cast iron products, then screens are not provided for them, so there are only three options left: buy it, leave the space open, or make a screen for the bathtub with your own hands.

Whether or not to use such a screen for a bathtub is a decision that must be made by the apartment owner himself, but, most likely, everyone will want to have a beautiful and neat bathroom, because it is the cladding that allows you to give the room a complete and attractive appearance, covering unsightly communications. But aesthetics is not the only reason for installing such a product. So, you can make a screen, additionally equipping it with small containers for storing various containers, jars with household products, which means you can save a significant amount of space in the room.

In addition, when using a bathtub without a screen, water may get under it, dirt begins to accumulate - all this will soon lead to dangerous fungus. In addition, the floor in the room wears out faster, losing its attractiveness. It is the installation of the screen that will avoid such problems.

What are the design requirements?

There are various options for arranging such a design, however, when choosing a material, shape, etc., you should take into account the basic requirements for the screen. First of all, remember that this product is installed for the bathroom, which means it will be used in humid conditions; the material of manufacture must be moisture-resistant and able to withstand sudden temperature fluctuations.

If this is not taken into account, then in just a couple of months fungus will begin to appear on the material, and it will begin to deteriorate under the influence of external factors. It is also important to remember about tightness; water should not get into the space under the bathtub itself. But it is also impossible to completely close off air access - lack of ventilation will lead to the appearance of mold. That is why it is necessary to provide doors or windows in the design.

There are some other requirements:

• When arranging the screen, it is necessary to provide the possibility of quick access to basic communications.
• The product should not interfere with access to the bathroom, for which purpose it can have a special recess for the feet, which is very important for small rooms.

The first thing you need to do is make a frame to install the screen. It can be made from brick, metal profiles, or a block of wood. Moreover, it is better to make brickwork to install a tile screen so that it can withstand the weight of the material; in the case of working with plastic panels or gypsum board sheets, other options can be used. But let's talk about everything in more detail.

• Brickwork

This option is rightfully considered the most reliable. Such a base will withstand any material. Erect brick wall you need to go from one wall to another, laying half a brick. In this case, you need to make a new row with a slight shift to the side. Between the top edge of the bathtub and the masonry we make a gap of 2-3 cm, and after it dries cement mortar, fill the gap with polyurethane foam. Also, when arranging the masonry, do not forget to make a comfortable recess for the feet.

• Wooden sheathing

Such a frame will also be quite strong, but the main disadvantage of wood is that it begins to rot when left in damp conditions for a long time. Therefore, it is better to use cedar, alder or larch to create a frame. To equip the structure, you will need beams with a cross section of 4*4 cm. When carrying out work, it is very important to correctly mark the places for installing the structure, skipping this stage, you will ensure that the frame begins to move to the side.

To obtain a smooth structure, make markings:

1. 1. Draw vertical lines from the corners of the bathtub (which are adjacent to the walls) to the base, using a plumb line.
2. 2. Step back 3 cm and make a second vertical line completely parallel to the first.
3. 3. From the free corner of the bathroom, draw a vertical line and at the point of contact of the line with the base, draw a square with sides of 3 cm.
4. 4. From internal corner square, draw horizontal lines to the walls of the bathtub.

This will be the perimeter along which we will install the wooden beams. We attach them to the base using self-tapping screws, after which we mount the vertical posts and secure them to the walls with self-tapping screws. We install a horizontal wooden beam on them and fasten it with a corner. Intermediate boards need to be installed from the corner posts at a distance of about 0.5 m. To achieve maximum strength, coat all joints with liquid nails.

• Metal frame

When making such a frame, it is better to use the PN 27*28 profile, which is ideal for further installation of gypsum plasterboard, plastic and MDF panels. If you want to make a frame that can support tiles, it is better to use metal ones. profile pipes, however, in this case you will be faced with the need to carry out welding work. We carry out the markings in the same way as for wooden sheathing. We attach the lower guide to the floor using dowels, install the side racks on them, securing them to the walls.

To give the structure strength, make a plank at the middle of the height. We fix the top profile on the side supports, and to strengthen the top guide, fold the two profiles together and secure them together. All that remains is to mount the vertical racks at a distance of 30-40 cm from each other. After installing the frame, coat the free space between the side of the bathtub and the structure polyurethane foam.

What to do if the bathtub is of a non-standard shape?

The most important thing here is to repeat exactly all the bends of the structure. For the manufacture of the frame, you can use a galvanized metal profile, and for the cladding - extruded polystyrene foam of maximum density. Before starting work, it is worth measuring the length of the bathtub and cutting a profile of a similar size, trimming it every 3 cm.

In the future, follow the following instructions:

1. 1. Attach the profile to the side of the bathtub and secure with tape. Bend it smoothly along the cuts you made and continue to secure it with tape at short distances. To hold the shape, also stick tape along its entire length.
2. 2. Carefully unfasten the profile from the bathtub and fix it to the floor, carefully moving it inward to the thickness of the profile. If you use tiles to create a screen, then in addition to the thickness of the material itself, add about 5 mm for glue and putty.
3. 3. Cut two sections of the profile (based on the height of the bathtub), attach to the walls with self-tapping screws. Cut the polystyrene foam into individual panels about 20 cm wide and insert each panel into the profile with the low end and the top under the side of the bathtub.

Immediately treat the inside with polyurethane foam. Install all panels, not forgetting to leave a small distance for the hatch. It can be installed after the foam has hardened. All that remains is to thoroughly putty the entire surface. After the mixture has dried, you can decorate the screen with tiles, plasterboard or other materials.

Making a screen with your own hands - step-by-step instructions

To create a high-quality screen, you need certain tools and materials that will allow you to do the job quickly and efficiently. The devices used in the work must be selected based on the material.

When working with plastic you will need:

• Bars for supports.
• Liquid nails.
• Profiles with fastenings.
• The required number of plastic panels.

Among the tools you cannot do without a stapler, a puncher, a cutting knife, and a square. Before you start work, be sure to measure the marking line so that it completely follows the outline of the bathtub. After this, attach the profile to the covering, and the fastening should be carried out from the inner edge (where you will install plastic panels).

Application liquid nails will ensure the absence of damage both on the bath itself and on all surfaces. We also fasten the panels to the bars using liquid nails: we fasten a piece of material from below along the top of the profile, since we need to additionally leave free space for installing the plinth. It is important to understand that to install the last panel you need to have skill; try to combine the first and last parts so as not to carry out additional trimming.

How to install a tile screen? Ceramic tiles are a popular material for making screens, since this material is not only visually attractive, but also reliable and durable. We are also pleased with the huge variety of color and texture options. To install such a structure, prepare metal corners, drywall, tiles, metal profiles. Everything here is quite simple: after assembling the metal frame, it needs to be sewn up with gypsum board sheets, and tile adhesive is applied on top and mounted tiles.

To install a screen made of gypsum board sheets, you will need similar tools as when working with tiles. After installing the frame and gypsum board sheets, simply apply on top decorative plaster, cover with moisture-repellent wallpaper, for example, vinyl to decorate the front side of the screen.

Features of arranging a screen for corner baths

The corner bathtub has a non-standard shape; when creating the screen you will have to tinker a little, but the time spent will allow you to enjoy the result of your work for a long time.

It is best to make a curved product from plastic, since sheets of drywall are quite difficult to bend, much less install in this form on a rigid profile.

To mount the frame, install guides on the floor so that they follow the shape of the bathtub. Attach to the top panel using liquid nails wooden blocks to secure the top guide. A plastic panel of the required size is cut out and carefully inserted into the guide panel - the lower joints can be covered with a plinth.

A corner bathtub made from brickwork and decorated with mosaics. After completing the work, all joints on the structure should be sealed with moisture-resistant sealant.

In order to qualitatively equip your bathroom, you should not forget about the aesthetic side of the finish. If you think that after renovation it is enough to install furniture and plumbing and that’s all, then you are deeply mistaken. In some cases, communications running under the bathroom remain visible, which, of course, do not add aesthetics to the room. Therefore, the free space under the bathtub should be covered with something, and a decorative screen is ideal for these purposes. Often, after repairs there is practically no money left, and it is not possible to buy ready-made panels, or there are other reasons, so you can make a bath screen with your own hands.

Aesthetics above all

In Soviet times, the free space under the bathroom, as a rule, was not closed, and no one worried about the aesthetic side of the issue. But time goes by, technologies are developing and make it possible to make a screen for a bathtub of almost any shape and style. Nowadays special attention is paid small details interior, because they can radically affect the overall picture of the renovation.

Screens for the bathtub can be purchased together with the bathtub or separately from it, but it is not always possible to choose the desired size and shape of the structure. Therefore, you can create a homemade bath screen that will not differ from the factory one either in quality or appearance.

And in this article we will tell you how to make a screen for a bathtub with my own hands, what is required for this, what material to choose and other useful things.

Selecting material for the screen

At the very beginning, before making a bathroom screen with your own hands, you need to decide what material will be used.

The most popular today are:

• plastic;
• acrylic;
• brickwork;
• tiles.

Product requirements

Just like a factory product, a homemade bath screen must meet certain requirements:

• After installing the screen, there should be free access to communications. That is, the design must contain a door, window or canvas made in the form of sliding sections;
• Material or its protective coating must correspond to the special microclimate of the bathroom. In the bathroom there is almost always high humidity, and sudden temperature changes occur. Therefore, ordinary finishing materials for the bathroom cannot be used, because under the influence of these factors they will quickly collapse;
• After installing the screen, the bathtub should not rest on its plane.

Tip: The free space under the bathroom is often used as a niche for storing small items, household chemicals, detergents etc. You can also install from the inside and outside additional shelves. This solution is especially relevant for small-sized baths.

Creating a brick screen

Brick is enough universal material. In general, making a screen for a bathtub from brick is a classic option.

Creating a brick screen under the bathroom with your own hands is quite simple, you just need to know and take into account the peculiarities of the work process:

• The laying is carried out in a quarter of a brick;
• The screen is placed from one wall to another along the border of the bath;
• To create a correct and strong screen structure, each row of brick is shifted by half of the previous one (“stitched”), that is, a “chessboard order” is obtained;
• The space between the floor and the bathtub is not completely filled; space must be left for a door or viewing window;
• The last row of bricks is not placed close to the bathtub. A gap of 1-2 cm is left between the brick and the bathtub; it can be blown out with foam or a decorative overlay can be installed.

When making a screen for a brick bathtub, you need to remember that this is not a completely finished structure. After completely dry Mortar for masonry, decorative finishing is installed on top of the brick; this can be tiles, laminate or mosaic.

Important! It is highly undesirable to use wallpaper, because high humidity and the temperature of the lines of service will be very short.

Making a screen from MDF

Screens made from MDF panels are quite popular, because with careful use and high-quality processing surfaces they can last long time, which sometimes amounts to 10 or more years.

Before making a screen for a bathtub from MDF, a special frame is installed from a metal profile or wooden beams.

Important! If wood is used for the frame, it should be pre-treated with a special antiseptic.

When the frame is completely ready, you can start covering MDF panels. To properly protect the material from moisture penetration, it is treated on all sides with a primer, and the places in contact with the floor are treated silicone sealant.

The screen must contain technical and ventilation holes approximately 2x5 cm in size. To make such holes look harmonious, you can install decorative grilles or panels for ventilation ducts.

Manufacturing of plastic screens

Making bath screens from plastic panels is much simpler than structures made from MDF. Since there is no surface pre-treatment process and decorative cladding, installation time is reduced several times.

Note: The undoubted advantages of plastic screens include easy installation and dismantling of the canvas.

Before installing the structure, you need to build a frame; for this, you should use a profile for the screen under the bathtub. Its installation is mandatory because it will fix the panel under the bathtub in in the right position. Thanks to this design it is possible to create sliding structure. This solution will allow you to rationally use the space under the bathroom.

The frame is made of several parts. The starting profile is installed first, which serves as a support for subsequent structures. The reliability of the installation will determine whether the structure will warp or not. Subsequent elements are mounted on special slides, along which the canvas will move.

Just like in MDF screens, plastic structures must have ventilation and technological openings.

We must remember! When making a screen for a bathtub yourself, you need to take care of sealing the area adjacent to the floor. This procedure can be performed with sealant. Such actions will prevent water from entering the space under the bathtub.

Decorative tile panel

The process of creating a screen from tiles is very similar to the previous ones, only here the pre-prepared frame is sheathed with moisture-resistant plasterboard, after which ceramic tiles are laid.

Unlike previous designs, the tiled screen for the bathroom is made monolithic with your own hands. Therefore, before starting the installation, you need to think through the entire design of the screen, where the communication will take place, ventilation and technical openings will be located. Since access to the pipes will be limited, at the very beginning you will have to take care of creating a window or door for servicing the communications.

Before making a bathroom screen from ceramic tiles, you need to decide on the material for the base. The best would be brickwork or plasterboard construction. The frame for plasterboard can be made of wooden blocks or a metal profile.

Ceramic tiles are laid using waterproof tile adhesive for kitchens and bathrooms, and the seams are sealed with a special grout.

Important! The grout must contain substances that prevent the formation of fungus and mold.

A few words in conclusion

So that the screen for the bathroom with your own hands is of high quality and creates cozy atmosphere indoors, use our tips on how to make a screen for the bathroom, and you can also study video tutorials and photo reports from masters.

In order to hide all communications, pipes and drains that are located under the bathroom, a special screen is installed. It mainly carries an aesthetic load so that the appearance of the lower part of the bathtub does not spoil the design of the bathroom. Some modern bathtubs already come complete with screens that perfectly match it in appearance and functionality, but not all of them. In order not to spend money on buying a ready-made and not very cheap screen, you can think about how to make a screen for a bathtub with your own hands. This not only allows you to significantly save money, but also install a screen that will fully correspond to the tastes and preferences of the owners; in addition, you can equip the screen with several useful functions.

What to make a bath screen from?

Exists huge amount building materials, which can be used in a damp bathroom environment. So we can distinguish the following options, based mainly on the material that will form the base of the screen:

1. Laying a brick screen;
2. Sheathing with moisture-resistant plasterboard followed by finishing with any suitable material(tiles, plaster, wallpaper, etc.)
3. Sheathing with moisture-resistant MDF, OSB with subsequent finishing;
4. Plastic sheathing.
5. Purchasing a ready-made screen or a set of sliding doors.

In addition to the store solution, only plastic sheathing actually allows you to form a screen without the need for further finishing. This material is quite acceptable and practical, not affected by moisture and biologically neutral. It is easy to clean and quite durable, even if one or more strips of plastic sheathing are damaged, it is easy to replace. Still, for a durable design or if plastic simply does not fit into the interior of the bathtub, you should choose one of the remaining three options.

In any case, the screen for the bathtub, no matter what it is assembled from, must meet several requirements:

• To access the main sewerage units and laid communications, there must be a technological opening that can be closed with a door or plug;
• It is advisable to seal the space near the floor to separate the floor under the bathtub from the rest of the bathroom;
• The screen is not a supporting structure and the bath should not rest on it.

For convenience, a small recess is formed in the screen, most often with a slope so that it does not interfere with the legs. Some craftsmen, if there is free space under the bathtub or on the side of it, install an additional cabinet or drawer as part of the screen for household chemicals or detergents.

Laying a brick screen

In this version everything is simple. Along the border of the bathtub or from wall to wall near which the bathtub stands, a brick wall half a brick thick is erected. Mandatory, as during construction regular wall, the brick is altered, that is, each next row is shifted by half a brick. A window is formed in a place convenient for access to the bathtub drain. In order to cover it, it is enough to buy or make a door and attach it to the awnings.

Even though the brick wall is strong enough, you still shouldn’t rest the bathtub on it, so between the last row of bricks and the edge of the bathtub there should be a gap of about 1-2 cm, which is filled with foam. After this, you can cover the brickwork with ceramic tiles or any other suitable material that will match the design of the room.

If you liked this option, but you don’t know how to lay brick, read about the basics of working with it.

Sheathing with plasterboard

The most flexible method in terms of forming the shape of the screen. Everything depends only on the desire of the owner. Installing a screen under a bathtub begins with forming a frame. For this you can use like metal profile, and a wooden beam 40x40 mm. The tree must also be protected from moisture, otherwise rot and fungus will inevitably appear.

When installing the frame, it is taken into account that the facing material will also be sheathed on top of the drywall. So along the wall to which the side of the bathtub adjoins, a line for installing the edge of the profile is marked so that it is recessed from the edge of the bathtub by the thickness of the subsequent cladding. For example, if you plan to cover the screen with tiles, then an indentation of 12.6 mm + 5 mm + 4-6 mm (tile thickness) = 21.6-23.6 mm is made. The line must be continued along the floor along the entire length over which the screen will extend. In this case, a plumb line is used to adjust relative to the edge of the bath.

A UD profile is fixed along the perimeter of the resulting line. The profile that is attached to the floor should additionally be glued with sealant to prevent water from getting under and from under the bathtub. Next, the CD profile is installed vertically and secured to the supporting profile. The distance between the profiles is maintained at 600 mm, and additional racks are installed in the place where there will be a technological hole or recess for installing a drawer or cabinet.

A ledge for feet can be formed in the center of the bathtub. To do this, the profile on the floor is not installed in a straight line, but in the shape of the letter U with a recess for the bathtub of about 10-15 cm. The racks in the niche will be installed at an angle.

Example of a tiled plasterboard screen with a lip

Used for cladding moisture resistant drywall green. It is cut to the appropriate length, equal height screen minus 2 cm. Fastening is done with hardened black self-tapping screws every 15 cm around the perimeter of the sheet and in the center along the profile. In this case, it is important to choose the correct length of screws so as not to inadvertently screw the top screws into the acrylic bathtub. The sheets are attached with 1 cm indentations from the floor and the edge of the bathtub. This is necessary to prevent swelling of the drywall. After all, even though it is moisture resistant, it will still begin to deteriorate from direct contact with water.

When the sheathing is completed, the drywall is primed and sheathed with any suitable material, for example, ceramic tiles, decorative plaster, moisture-resistant wet wallpaper, film materials, etc.

Video: example of installing a permanent screen under a plasterboard bathtub

Sheathing: MDF, OSB

The entire process is virtually identical to drywall sheathing. The only difference is that additional ventilation slots should be made in the screen on the opposite side of the technological hole. To do this, it is enough to make a slot only 2-3 cm wide and 5-10 cm long, which can be covered with a neat plastic grill. MDF sheets must be primed on both sides before being fixed to the frame.

Screen made of plastic lining

Most simple option The bathtub will be lined with plastic lining. This option immediately produces a beautiful finished surface and does not require additional processing or plating. If necessary, the screen can be easily disassembled to gain full access to the space under the bath.

In addition to the lining itself, you will also need a starting profile, which is strengthened along the perimeter of the future screen. From the top, under the edge of the bathtub, a beam or metal profile is first secured to the walls, and then a plastic starting profile. For the reliability and strength of the entire structure, it is also advisable to secure the profiles in the middle of the screen. This is especially important when using cheap options plastic lining, which can deform and lose its shape even from small mechanical loads. The lower profile, as in the previously described options, should preferably be glued to the floor using sealant.

Strips of plastic are cut using a regular construction knife and the edges are inserted into the starting profile. This way the entire surface of the screen is covered. At the site where the technological hole is formed, a rectangle is cut and a special plastic door is inserted, which are sold in the same places as the lining itself.

Since there is an unimaginable variety of plastic lining on sale in terms of color design, pattern and even texture, then choose suitable option won't be difficult.

Sliding version of the plastic screen for the bathroom

As for the sliding screen for the bathroom, its creation requires either imagination or a ready-made installation kit from any hardware store. If you don’t have the second one, we recommend looking for ways to implement craftsmen. One option is in the video below.

Each shower has its own individual qualities, special appearance, and convenience. To create interior design different practical requirements must be taken into account. First of all, this is due to the unsightly outlines of water pipes and other communications. with your own hands will help you get rid of this problem forever.

This barrier allows you to hide the unsightly appearance of the basement space. In addition, the sliding screen is a real element of the overall design of the shower room, so its decorative functions are highly valued. Today there are quite a lot of variations of products that are created from the most various materials. Taking into account the varied design options, the room can be transformed beyond recognition.

What are screens for?

Sliding models allow you to make the most of the usable space in the shower room. Conventional panels or doors are not very convenient to use, as they take up quite a lot of space. In order to make a bathtub screen with your own hands, you need to purchase a regular bathtub with attractive supports. The sides of the product must be finished with a special material, which allows the bathhouse to have a presentable appearance.

Based on the location of communications in the shower room, it is necessary to select one or another screen model, product profile, as well as the size of the panels. Otherwise, there is a possibility that the selected frame will not fit. Water pipes They are always unpleasantly conspicuous, so the structure should be assembled only after careful measurements. Otherwise it might ruin overall design bathroom, because ugly protrusions do not look very aesthetically pleasing.

However, there is another way out - buy a standard fence and do the covering of the panels yourself. Usually, when purchasing acrylic products, the installation of plumbing fixtures is carried out with ready-made doors. They allow you to close the basement while saving space, i.e. rational use, which eliminates the appearance of large voids, unlike cast iron or steel products.

In addition, there is another good reason - the possibility of using this space for domestic needs. Often household items, cleaning products or tools are stored in these niches. Here you can make wooden or plastic shelves for convenience.

Separately, it is worth noting that basement doors help get rid of the accumulation of dirt and dust in hard to reach places where microorganisms or insects usually develop.

Thus, the panels help get rid of various negative consequences caused by unsanitary conditions. The undeniable advantages of these products include their attractive appearance, carefully designed by the designers. Modern technologies make it possible not only to put sliding doors under the bathroom, but also to decorate them in a stylish, colorful and unique way. This gives the shower its own personality, which distinguishes it from other rooms in the apartment.

What will you need?

How to make a screen for a bathtub, or rather, from what materials? To manufacture sliding panels, you will need a supporting structure in the form of a profile, as well as the main raw materials from which the composition will be created. In order to decide on the choice of material, you need to proceed from the operating conditions of the bathroom, as well as personal preferences. You can carefully think through the image, starting from the tools available.

• MDF panels;
• drywall;
• plastic;
• ceramics;
• acrylic.

Separately, it is worth noting that sometimes it is allowed wooden elements, but they must be moisture resistant, for example, beech or bog oak. In addition, you should decide on the type of valves, i.e. the design itself. Screens come with sliding elements, with only one door, tightly closed, and also with a special niche for feet. All these parameters are very individual and suitable for different shower rooms and directly depend on the taste of the owner or his financial capabilities.

DIY installation. Plastic

In order to create a full-fledged screen, you need to purchase some tools. Usually they come with the necessary equipment and related materials. This will allow self-installation do all the work not only quickly, but also efficiently. Devices should be selected based on the material itself, for example, for wood, you will need a saw or jigsaw, and for ceramic tiles, a glass cutter.

For plastic panels you need:

• Wooden blocks to create a structure or supports.
• Liquid nails for fastening various materials.
• Lightweight UD profiles with their own fastenings.
• Directly plastic blanks.

It is worth discussing some points separately, since often the bathrooms in most apartments have a combined appearance. This means that there is a need to take into account the sewerage design, i.e. toilet. The placed toilet represents an obstacle that must be carefully avoided when installing the screen and its subsequent use. The standard set of installation tools includes:

1. construction stapler;
2. perforator;
3. specialized knife for drywall;
4. screwdriver;
5. square

In order to install a screen that will follow all the contours of the bath, you need to measure a line or put markings that follow all the curves of the bath. Then, using screws, the profile made of metal or wooden blocks is attached to floor covering. Fastening is done from the inner edge, i.e. the place where the plastic panels will be installed. Using liquid nails, the bathroom itself and the surrounding surface are not damaged. Wood blocks secured with self-tapping screws will ideal option for cladding with the selected material.

Plastic strips are attached to the blocks, again using liquid nails. From below, a piece of plastic is attached to the top of the profile, since enough space should be left for plastic skirting board. Self-tapping screws designed for hardware. In this case, it is necessary to pay attention to the final stage.

This is due to the fact that attaching the last strip is very difficult, since you need to have a certain skill. You should try to align the first and final parts, and then put them on the side panel. At the same time, the resulting structure must have sufficient tightness between the parts. This is checked by checking the shrinkage of the grooves.

Tile

A DIY bath screen can be assembled from various materials. One of these is tiles, which are used to decorate sliding panels. She has visual attractiveness and high performance qualities. In addition, tiles are very common, and in stores they have a wide range, so there should not be any problems with choosing colors or textures.

To install it you will need:

• special metal corners;
• door hinges;
• moisture-resistant drywall;
• various fastening parts;
• tile;
• wood bars or metal profiles.

Decoration ceramic products occurs using proven technology. To begin with, he's going to durable frame as the basis for the entire future design. For this, wood or metal is usually used; of course, the latter option is better. After which the resulting blank is sheathed with plasterboard panels. A tile is applied to this base, which will be the front side of the screen.

Drywall

To install a plasterboard structure, you will need identical materials and equipment as for tiles. This is explained by the similarity of the process, since they are almost identical and are an integral part of each other. The surface of the shower screen itself can be covered with vinyl wallpaper, decorative plaster applied or tiled. In any case, the resulting fence will have an attractive appearance.

Textile

One of the most exclusive and rare options is a fabric partition. It's great for non-standard way to isolate the basement, however, the practicality of the screen is somewhat lost. This is due, first of all, to increased care of the coating, since little fabric is required more attention than other materials. You can cover the panels yourself using improvised means.

For this option, the following types of matter are used:

For a screen made of fabric, it is best to prepare metal frame or wood profiles. On the one hand, these decisions look quite strange, however, they have a practical justification. In addition, the fabric can be combined with various finishing materials or used as curtains. In the form of panels, fabric raw materials are rarely used and are used more as an addition.

Acrylic

Bathroom screens made of acrylic are panels various shapes, type and color shades. They, as a rule, come complete with acrylic products; they just need to be installed correctly and they will last for many years. Installation of the frame does not create any difficulties and can be done with your own hands.

MDF

Decorative MDF panels look good as a sliding screen in the shower room. Their installation is carried out by analogy with drywall, however, they differ in that it is necessary to add anti-funge compounds and prime the surface more thoroughly. It is also worth noting that the material must be moisture resistant.

Video instructions

Very often, a screen for a bathtub is made with your own hands for the sole purpose of hiding the not very aesthetic appearance of communication pipes.
But at the same time, this element can become one of decorative ornaments bathroom.

Main types of bath screens

Depending on the functional load, bath screens can be:

• deaf;
• with shelves: open or closed doors;
• removable;
• swing;
• sliding;
• with retractable sections or drawers.

But, regardless of which option you have to choose, you should consider three important nuances:

• the screen must provide free access to communications for their maintenance and repair, including emergency;
• do not use the crane as load-bearing structure for the bath itself;
• make a reliable waterproofing seam between the floor and the screen to avoid possible ingress and flow of water under the bathtub.

Installing the screen sometimes allows you to slightly expand functionality premises. But this fact is especially relevant for small bathrooms, as it allows you to organize additional features, for example, for storing household chemicals. In this regard, the sliding screen for the bathtub has the greatest functionality, since it does not require additional space to open the doors. From an aesthetic point of view, great opportunities are provided by blind screens, which can be finished with the same materials as the entire bathroom.

The most popular materials for making screens

The main requirement for the materials used to construct a bathtub screen is moisture resistance, and it is based on this criterion that a choice should be made.

Solid screens for bathtubs

If the choice is made in favor of the deaf option, then the most practical material- brick, which can then be easily covered with cladding. But it is imperative to provide a technological opening for access to communications, which, however, may also have decorative design: this can be an ordinary hatch, attached with self-tapping screws to the frame, and when closed it does not stand out against the background of the screen in any way and does not spoil its design.

Fixed screens can be mounted from other materials, for example, from MDF, plastic, etc., but most often they are used to make more complex structures with a frame structure that provide greater functionality - such as sliding or swing systems.

Tile screen

Removable and sliding systems

Removable screens are most often used for acrylic bathtubs; they often come with it in the same configuration and are made of the same material. The undeniable advantage of such a screen is its beautiful and presentable appearance, perfect fit to the bathtub, and the disadvantage is the inability to use additional space in the bathroom.

Pay attention!

This material is usually used to make ready-made designs, which are offered in a large assortment in specialized stores. If necessary, you can choose the option with an end insert. In this case, it is important to purchase a model exactly according to the dimensions of the bathtub, but you will still have to make an exact adjustment to the location.

In quite rare cases, a mirror can be used as a material for the screen, from which the panels are made or, in the case of a device sliding system, doors.

Installation of frame types of screens for bathtubs

Due to the fact that many types of materials that are highly moisture resistant have appeared on the market, the task of making a screen for a bathtub is not difficult and can be done independently. Often, moisture-resistant plasterboard, plastic or MDF, OSB panels are used for this. But in this case, a frame must be made, the material for which is metal or aluminum profile. Wood, even specially treated wood, is not recommended for this, although it is allowed.

Making a screen frame

The profile size is determined by the width of the material used and the thickness decorative finishing- for drywall and OSB it is mandatory, and MDF panels or plastic do not require additional decoration. If you plan to install a sliding system, you should also purchase guide rails similar to those used in sliding wardrobes. To create a convenient approach to the bathtub, you should either provide a special indentation of 5-10 cm from the edge of the bathtub inwards or install an inclined version of the frame.

Access to communications can be provided in two ways: immediately behind open doors or behind an additional internal panel, for example, made of MDF - in this case, the external space has a more presentable appearance. But access to communications can also be arranged in an original way, for example, by installing a drawer in the technological window, which, if necessary, can be easily pulled out completely.

Installation of panels

After work on the frame is completed, it is necessary to prepare the panels for installation. First, parts of the future screen are cut out of a sheet of material, they are treated with water-repellent compounds and they are installed. The blind parts are attached using self-tapping screws, and the doors are mounted on runners or hung on hinges.

Despite the fact that the materials used have good moisture resistance characteristics, you should not abuse this, especially considering the conditions in which they will be used.

Plastic screen

The main advantages of plastic bath screens

Plastic is very often used to make screens and its popularity is explained by the following reasons: good performance characteristics, attractive appearance and low price of the material. At the same time, a plastic screen can be purchased as a ready-made factory design or you can make it yourself. In the second option, it is also necessary to make a frame, making sure to treat its lower part in contact with the floor with sealant.

It is important when constructing a plastic screen to install an additional profile to ensure the stability of the structure, since the material has a special large sizes sag. In order for a screen made of plastic to fit most organically into the bathroom interior, you can choose the material both in color and pattern, and in texture.

Sliding simple screen

Brickwork for screen

This method The screen device is perhaps the most traditional and justified, provided that there is no particular need for additional space in the bathroom. To do this, masonry is made along the perimeter of the half-brick bathtub, with the obligatory installation of a technological window for access to communications. But before installing a screen under a brick bathtub, it should be borne in mind that such a structure cannot be used as a frame. This especially applies to cast iron or steel, and with acrylic bathtubs Variants are possible, but it is still better to use a special installation frame.

Pay attention!

When carrying out the laying, do not forget about bandaging it, as well as about a gap of 1.5 cm with the bathtub, which is sealed with waterproof silicone sealant or blown in with foam.

Special attention attention should be paid to the design of the technological opening for servicing communications. Often this is a small door or hatch that has the same decorative coating as the entire screen, and hinges or special canopies can be used for fastening.

Screen with doors

Bath Screen Brickwork Finish Options

Having installed a permanent screen under the bathroom, choosing the material for its finishing is easy. Naturally, the determining point is the overall style of the interior and, naturally, the moisture resistance of the material.

You can begin facing work after the masonry is completely dry; almost any material can be used to decorate it: ceramic tiles, decorative panels plastic and others. But, of course, in the bathroom the most popular and practical type of finishing is the option of tiling, which can repeat the pattern and color scheme walls or contrast with them or with the floor covering. Also, even a mirror can be used as a decorative finish for screens.

DIY bath screen video:

See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?

Would you like to suggest photos on the topic for publication?

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!