Titebond wood glue: types and application nuances. TITEBOND - assembly adhesives, sealants. Industrial adhesives for wood Types and scope of application of glue

TITEBOND II Premium Wood Glue is a leading brand. A one-component adhesive that meets ANSI Type II water resistance standards. It is ideal for outdoor applications including garden and outdoor furniture, birdhouses, mailboxes, picnic tables, etc.

The adhesive is characterized by a strong initial set, a high curing speed, it forms a strong connection, is easy to process, and allows indirect contact with food (gluing cutting boards), ideal for use in high frequency adhesive systems. The range of its application is extremely wide: from gluing at home to cold, hot and HF presses in furniture factories. Therefore, its packaging is completely different: from 37 ml bottles to 1000 liter containers.

Meets ASTM D-4235 requirements

Product Features

• First adhesive to meet ANSI Type II water resistance requirements;
• For outdoor use;
• Perfectly processed;
• Does not affect finishing coatings;
• Allows indirect contact with food products;
• Ideal for use in HF and hot presses;
• Easy to clean with water;
• Load group according to EN 204/205 1K/D3.

Physical properties

• Base: Cross-linked PVA Estimated VOC: 5.5 g/l
• Condition: Liquid White point temperature: 12.7 °C
• Color: Honey yellow Solids: 48%
• Dry film: Translucent, yellow pH: 3.0
• Density: 1.09 g/cm 3 Viscosity: 4000 mPa.s
• Freeze-thaw cycles: Stable
• White point(12.7°C) - the lowest recommended temperature of glue, air and glued materials at which a high-quality connection is possible.
• Shelf life 24 months in original packaging at 23 °C

Bond strength per ASTM D-905 (hard maple)

Temperature Strength, kg/cm2 Destruction of solid wood, %

Room 264 72

65°C overnight 123 6

Application examples

By face and edge, cabinet furniture, tables, chairs, stairs, furniture panels, doors, benches, window frames

Directions for use

• Application temperature: above 12.7°C
• Working hours: no more than 10 minutes (at 21°C and 50% humidity)
• Total assembly time: 10-15 minutes (at 21°C and 50% humidity)
• Minimum consumption: approximately 162 g/m2

Applied pressure: it is enough to combine the surfaces to be glued together (7-10 kg/cm 2 for soft wood, 9-13 kg/cm 2 for medium wood, 13-18 kg/cm 2 for hard wood)

Application method: plastic bottle with a flat nose, application by roller or brush.

Cleaning: Undried adhesive is removed soft cloth. Dried glue is removed mechanically.

Restrictions:

Titebond II Premium Wood Glue is not suitable for use in conditions of constant dampness or below water level. Not used for load-bearing products. Do not use when the temperature of the adhesive or parts is below 12.7°C. It is recommended to test the glue on samples

glued materials.

Shelf life: The adhesive is best used within 24 months from the production date.

It is recommended to mix the glue before use. The glue is stable in freeze-thaw cycles, but before use it must be heated at room temperature without additional heating devices and mix thoroughly at low speed.

The only one-component adhesive that meets the most stringent ANSY TYPE II standard for moisture resistance

• Provides strong initial set and short pressing times
• Ensures the strength of the adhesive joint is higher than the strength of the wood itself
• Non-abrasive: does not spoil cutting tools during final processing
• High resistance to heat and solvents
• Resistant to acoustic vibrations
• Remove with a damp cloth before drying

Physical properties

• Base: cross-linked polyaliphatic emulsion
• Condition: viscous liquid
• Color: cream, after drying translucent cream
• Dry residue: 48%
• Viscosity: 4000 mPa*s
• Acidity ph: 3
• Flash point: 100°C
• Freeze resistance: stable
• Shelf life: 24 months in original packaging at 20°C
• Moisture resistance class: D3

Directions for use

• Application temperature:+ 12°C
• Operating temperature:-30...+50°С
• Consumption: 180 g/m2
• Working time: 10-20 minutes depending on conditions.
  Working surfaces must be dry, free from oils, grease, dirt, loose old paint and any other materials that reduce adhesion
• Cleaning: clean with water before drying. After drying, excess is removed mechanically

Peculiarities

• Freezing does not change the structure of the glue, but leads to its thickening
• After long-term storage Before use, to restore the properties of the glue, mix thoroughly
• Meets the requirements of ASTM C557 (USA) and AFG-01 D3498 of the American Plywood Association, DIN EN204 D3

Use for underwater connections

Precautions

Use only in well-ventilated areas. May cause skin irritation. If dizziness or other unpleasant effects occur, you need to go to fresh air, consult your doctor. If glue gets into your eyes, rinse them for 15 minutes. running water. If glue gets on your skin, wipe it off and wash your skin with soapy water.
Keep the glue out of the reach of children!
Use only for its intended purpose.

Packing

Store and transport at t > 5°C.

The widely known Titebond wood glue has earned a reputation as one of the most quality materials, used for gluing wood. Application innovative technologies when developing a unique composition, it made it possible to create an adhesive substance with which it is possible to produce various types works

Types

There are about 25 types of Titebond glue that are successfully used for industrial purposes. The most common are universal moisture-resistant compounds consisting of one component. They are used for gluing wood.

There are:

• II Premium. The composition is moisture resistant, elastic, and insensitive to solvents.
• Original Wood Glue. The composition has high hardness and is non-plastic.
• Titebond 3 glue. Contains no chemical solvents.

Depending on the purpose and conditions of use, one or another composition is selected.

Peculiarities

Titebond adhesive is intended for professional use. However, if you follow the instructions, it can also be used at home.

Depending on the type of substance, the composition of the components differs. Among the main components are aliphatic resin, synthetic rubber, polymers, polyurethane, protein, and water. The standard package contains 473 ml of the substance.

When working with glue, it is important to observe temperature regime, humidity parameters, which are indicated on the manufacturer’s packaging.

It should be noted that when hardened, the adhesive emulsion forms a film beige color. The glue can be easily removed from the surface to be treated before it dries. After this, you will have to use available means.

Characteristic

Depending on the type of composition, Titebond adhesive (to a greater or lesser extent) has the following characteristics:

• is water resistant;
• provides high connection strength;
• has resistance to high temperatures(up to 50 degrees above zero);
• is not destroyed by chemicals;
• does not perceive acoustic vibrations;
• does not contain abrasive components and, therefore, does not damage tools;
• the substance contains toxic components;
• does not collapse when frozen;
• flammable at temperatures of 100 degrees.

Among other things, Titebond 3 universal adhesive has the following properties:

• environmental friendliness;
• Suitable for work at low temperatures.

Knowledge of the main characteristics of the composition allows you to obtain best quality at no extra cost.

Scope of application

Adhesive II Premium used for joining wooden joints, gluing paper material, laminate, plywood, chipboard, veneer. The substance is used to repair street wooden furniture. They can be used to glue cutting boards for cooking.

Original Wood Glue used for constructing and repairing wooden musical instruments.

Titebond 3 used for joining veneer, plywood, wood, plastics, chipboard. The product is used for both internal and external construction work. Due to its harmless composition, the substance can be used in the food industry. Glue is not used to connect surfaces that are under water.

Before applying the substance to the surface, it must be stirred. It should be remembered that the composition completely hardens in 10-20 minutes. Therefore, it must be prepared before starting work. To ensure a tighter adhesion of the surface, you can hold it under pressure for some time.

All work with glue must be carried out in protective equipment. For this, special gloves and glasses are used. If the product gets on the skin or mucous membranes, it should be washed off with plenty of water, and if necessary, contact a specialist. The room should be well ventilated. Air humidity should not exceed established standards.

The shelf life of the waterproof adhesive is 2 years from the moment the package is opened. It should be stored at room temperature. It is not recommended to use expired glue.

Wood adhesives are very popular in furniture production And carpentry. Craftsmen consider Titebond glue (Titebond), or rather, its entire line produced under this brand, to be a quality product. Manufacturer - American company Franklin International monitors the quality of products and also guarantees the highest moisture resistance of the compositions among analogues.

Types and scope of application of glue

Titebond wood adhesives are high quality joinery compounds for professional and home use. They have different bases depending on the specific purpose: artificial rubber, polyurethane, aliphatic resins. The products also contain polymers, protein compounds, water, various modifiers and plasticizers.

In total, there are 25 types of adhesives in the Tightbond line, but on the domestic and European markets the most common are universal one-component products with strong water-repellent properties. Their technical specifications unique: when proper preparation base and following the instructions, the adhesive seam will be practically not exposed to moisture. Most adhesives can be used for the following purposes:

• styling parquet board at home, in offices;
• restoration of old wooden coverings;
• furniture assembly;
• gluing wooden and plastic parts;
• production of plywood products;
• various repair work.

Depending on the specific type of waterproof glue, its properties and purpose may vary. Main types adhesive compositions"Titebond":

1. Original Wood Glue. Adhesive with a red label is used for repair, restoration of musical instruments, in production similar products. After drying, it forms a hard, low-plastic joint that does not interfere with the normal sound and does not change the properties of the wood.

1. Titebond II Premium. This product has a blue sticker, it is also moisture resistant, and is not susceptible to solvents. The adhesive seam will be quite elastic, the initial setting will be more powerful. Due to its environmental friendliness, the glue can be used for gluing wooden cutting boards and other products in indirect contact with food. Also, glue number 2 is used for repairing indoor, garden, and other outdoor furniture, mailboxes, products made of veneer, laminate, plywood, fiberboard, chipboard. It is packaged in bottles, jars, buckets and even barrels with a volume of 0.037-100 liters.

1. Titebond III Ultimate. Titebond 3 adhesive with a green sticker is available on water based, has an opaque consistency, creamy color. All polymers in the composition are harmless to health, so the product is well suited for products that come into contact with food. Most often, glue is used in the food industry, but it can also be used for repair, restoration of plywood, veneer, and other types wooden surfaces, as well as plastic. It is suitable for outdoor and interior work, but not suitable for products placed in water.

1. Titebond Heavy. It's super strong assembly adhesive, comes in a yellow tube. It contains artificial rubber, due to which it does not harm any type of wood, and can even be used for gluing wet, frozen wood. The finished adhesive seam is elastic, not subject to destruction, flexible, and does not deteriorate from mechanical impact. In addition to wood, this glue is suitable for gluing ceramics, slate, organic glass, natural and artificial stone, fiberglass, concrete, ceramic parts.

Glue characteristics

Despite the possibility of professional use, the products in the series do not require special skills or knowledge during application. They are easy to use, you just need to read the instructions carefully. A regular tool, including a metal one, is suitable for the job; the glue does not stick to the metal, and all devices can be easily cleaned.

The main property that distinguishes Titebond adhesives from PVA is liquid nails, is a high moisture resistance that meets American standards.

Other properties and technical parameters Titebond adhesives:

1. All adhesives become transparent after hardening, despite the initial dullness of the consistency. They can be applied even to delicate items.
2. The products are frost-resistant; after drying, the seam will withstand temperatures down to -35 degrees. Also, glued bases can be heated to +40 degrees, but at +100 the seam area can catch fire.
3. The strength of the glue joint will be very high, much higher than the wood itself. This determines the durability of the glued products. The seam is resistant not only to water, but also to the influence of solvents and acoustic vibrations.

1. The adhesives are universal, they are suitable for all types of wood, as well as other wood-based compounds, combined materials, many types of plastic. You can also effectively fasten paper and cardboard with these products. Elastic compounds are suitable for use as sealants.
2. All errors in work - stains, drips - can be washed off with water before complete hardening. This is very convenient for adjusting the adhesive seam.
3. Polymerization of the composition is quick (10-20 minutes), but still not instantaneous, and it is quite possible to correct the position of the parts. As humidity increases and temperature decreases, polymerization may slow down. You cannot work with the composition at temperatures below +10-12 degrees.
4. There is no need to subject the parts to strong compression or installation under a press. They will stick together even with a moderate degree of fixation, adhesion will not decrease.

The most popular adhesives of the Titebond brand have a dry residue of 48%, their viscosity is 4000 mPa/s, and their acidity is 3 pH. Material consumption is 180 g/sq.m. see. After opening, each product remains suitable for use for a long time (up to 2 years) if stored at a temperature of about +20 degrees. It is not advisable to apply the composition to painted substrates; use it in rooms with too much high humidity, poor ventilation.

Instructions for use

You can start working with the product only at positive temperatures indoors or outside buildings. For all types of adhesive compositions, preliminary surface preparation is very important: in the presence of dust, sawdust, and other contaminants, the degree of adhesion may decrease. In addition to such contaminants, grease, oil stains, and old paint. For this purpose, the following methods are used:

• grinding with a special machine, sandpaper;
• using a scraper;
• washing with household or professional detergents;
• wiping with degreasers and solvents.

Before work, mix the glue thoroughly, apply it to both parts, and press them well. It is not necessary to use a press, but it is necessary to prevent possible movement of the products. The drying time is 10-20 minutes; during this period, you can remove the glue that has come out with a rag, a napkin, or change the positions of the parts.

Work only in a well-ventilated area. Due to the environmental friendliness of the composition, you can not use special means respiratory protection, but for allergy sufferers, people with hypersensitivity and lung diseases, masks (respirators) are required. If you feel dizzy, you should immediately leave work and go out into the fresh air. If glue gets on the skin, it must be washed thoroughly with soap, otherwise there is a risk of irritation and redness. When the product gets into the eyes, rinse them well (at least 10 minutes), and if necessary, consult a doctor.

Titebond glue is one of the highest quality and convenient products that do not need to be diluted, but can be used in finished form. It has the highest moisture resistance among similar compounds and is economical, which is why it is most often used by professionals.

On Russian market There are many adhesive compositions available. In most cases, their manufacturers focus on the versatility of the product or its ability to connect synthetic materials. Titebond glue – more interesting option. Its varieties are not only multi-purpose options, but also mixtures designed to combine wood products.

Peculiarities

Although warranty period The service life of Titebond glue is 2 years; in practice, it is stored for at least 3 years. The developer indicates that to completely remove previously applied glue, you need to use a liquid nail cleaner.

The compositions produced are very diverse. They are intended for restoration work, creating parquet, gluing joinery. Judging by the reviews, the adhesive mixtures supplied by this brand perfectly connect wood and other materials. The result lives up to expectations; the products perform well both on a domestic and industrial scale.

Varieties

Solvent Free Cove Base

This composition helps to glue PVC and rubber finishing structures, as well as acoustic tiles. The underlying surface can be sheets of plasterboard, putty, paint and varnish and wallpaper, as well as ceramic tiles. Having come into contact with the surface, the glue prevents the attached materials from sliding down. It does not form harmful vapors, does not ignite, and fully complies regulatory requirements, adopted in the Russian Federation and the USA.

Its physical characteristics:

• state of aggregation – mastic of moderate viscosity;
• color – beige;
• shelf life – 2 years or more;
• frost resistance – acceptable for use in Russia

The glue itself and the materials to be joined must be heated to +5 degrees. After drying, the composition is removed with a sharp knife blade. The mixture should be applied strictly to one side; its choice is arbitrary. You should not use glue without a solvent to join parts that are under water for a long time.

Heavy Duty

Another example of super strong adhesive is Heavy Duty, which comes in a yellow package.

This mixture is intended to combine:

• processed wood;
• concrete;
• metal surfaces;
• plywood;
• various decorative panels.

This adhesive is distinguished by the strength of its connections professional level and ideal resistance to water. The formulation is based on synthetic rubber. The typical color of the product is light brown. It is allowed to use glue in the temperature range from -18 to +37 degrees. At the same time, already glued structures work stably in cold temperatures of up to 29 degrees and when heated to 49 degrees.

Like the previous type, Heavy Duty is applied to only one of the surfaces. The hardening time of the composition is from 20 to 30 minutes. Removal of fresh glue is done using mineral alcohol.

It is worth considering that the product does not cope with holding together parts that are constantly under water. The mounting composition is also not intended for gluing foamed polystyrene parts to each other. Use is allowed only outdoors or in places equipped with an exhaust hood.

Tub Surround

It is recommended to use Tub Surround adhesive in bathrooms. It connects perfectly plastic structures, including moldings and rigid plastic products. The main active ingredient is a strong solvent, which does not damage materials.

The product's resistance to water means there is no risk of destruction of the compounds created. However, during the gluing process, the surface must be perfectly dry, and it should also be degreased first. The reliability of the result is not guaranteed in case of joining wooden structures To ceramic tiles or other materials that do not contain pores.