Cost of replacing a gas meter. Timing for replacing a gas meter and basic rules How to change a gas meter correctly

There must be a replacement for paid and free gas meter in the apartment? This question is perhaps one of the most popular in discussions. Most often, the topic arises when equipment breaks down or is approaching the deadline for verification.

Periodically gas agent accounting may require verification. on ensuring verification of metering devices by citizens using devices in an apartment or private building, came into force in 1993 (as amended in 2008).

Therefore, the responsibility for the reliability of the data of the accounting device and the integrity of the device rests entirely on the shoulders of the owner. You, as private owners, incur expenses for maintaining the account. Accordingly, the question: “Is it free or paid to replace the gas meter in an apartment?” is removed from the discussion. Payment for verification, as well as delivery of the unit for verification, is considered the responsibility of the subscriber.

Gas meters are installed free of charge only if the housing belongs to the municipality. It is he who must install this accounting tool.

Is it free or paid to install a gas meter?

Today, gas meters are often installed free of charge; the law makes its own adjustments. For example, it has become mandatory to install gas meters in all types of structures. If the owner did not take care of the installation of the device, representatives of utility services will carry out such work themselves. The payment will be calculated in receipts in installments, but it is better to calculate in advance whether it is profitable to install a gas meter.

In a private house, replacing a gas meter always falls on the owner.
In an apartment, everything is somewhat different: if it is privatized, then you pay, but if it belongs to the state, then the payment falls on it.

The exceptions that do not pay for installation are:

WWII veterans;
large families;
low-income people who have reached retirement age.

Advantages of measuring instruments:

structural simplicity;
reasonable price;
accurate information about the amount of gas burned;
lower rates.

Rules for replacing a gas meter in a private house

In order to install a means of measuring gas entering your home, you will have to fill out an application. It is transmitted to the regional gas service. Service representatives will require additional documents with your application. For example, the rules for replacing a gas meter in a private house require the provision of documents that confirm ownership of the property.

The gas meter is installed according to the technical features of the premises. Together with technical capabilities, specialists determine the quality of the gas pipeline. This work is considered projection work. The cost of drawing up a project can vary from 10,000 to 20,000 depending on the region.

The question often arises: who pays for gas meter replacement, what are the rules? , published at the end of 2014, states that residents of Moscow Railways are not required to install gas consumption meters at all if the gas resources consumed in the house do not exceed two cubic meters.

In fact, experts themselves offer units from certain companies and certain technical features, without taking into account the nuances. If the class of the meter you have chosen does not match, you will be forced to change the device. If the selected and purchased device meets the technical parameters of the gas pipeline, gas workers have no right to demand replacement of the purchased device.

To avoid nuances, write down information about the purchased device in the document submitted to the gas service dispatchers. In your application, please indicate the readings of the metering device that may be present before the installation of the device.

Rules for replacing a gas meter in an apartment

Utilities work according to the deadlines established in the legislative document. For example, the rules for replacing a gas meter in an apartment require consideration of your application within three days. In any case, the specialist usually calls the specified telephone numbers and agrees on a convenient connection time.

If a specialist is absent within three days, you have the right to file a complaint with the state housing inspectorate.

Some suggest that you can install gas meters yourself. Craftsmen only purchase the necessary equipment and tools. However, the rules for installing metering equipment provide that work can only be carried out by a person with the necessary knowledge, experience and license.

In addition, specialists are required to take precautions. For example, the location of the meter must be accurately measured - at least 80 cm from gas devices. According to regulatory documents and, the device must be at a height of at least 120 cm from the floor.

How much to pay for installing a meter

Any metering devices are usually classified as property of the home owner. Therefore, it does not matter: a device is installed in a house or apartment. You, as the owner, will pay for the services and installation with your own savings.

However, the cost of the measuring instrument may vary. For example, the cost of the device itself, gas service, installation of metering equipment, as well as the number of actions performed by the employee can be taken into account.

If only applies gas stove, you can install the device for 3000-4000 thousand rubles. If, in addition to the stove, the house also has gas heating, then you will have to pay from 6,000 to 7,000 rubles.

Any measuring equipment has an operational period. The gas meter must be replaced according to established rules. Otherwise, his testimony will be considered invalid, and the person will have to pay according to the accepted average standards, and this is quite expensive. Next, we will talk about all the legal nuances.

Rules for replacing a gas meter

Gas supply lines are high-risk objects. Installation errors can lead to fatal consequences. Therefore, various government acts state that the installation of metering devices should only be carried out by organizations with the appropriate license. If you violate this rule, you can run into hefty fines, because such actions do not comply with safety regulations.

When installing gas meters in a private home, be sure to follow the following rules:

Before installation, a specialist must verify the functionality gas equipment and inspect the area.
The minimum distance from the meter to gas equipment is 1 meter.
The minimum distance from the opposite wall is 5 cm (this measure prevents corrosion).
If the meter is installed outside, it must be placed in a metal cabinet or under a canopy.
In the room where the meter will be installed, there must be natural ventilation.
The minimum distance from the floor is 160 cm. Some models may have their own requirements. In this case, they are guided by factory standards (usually indicated in the device passport).
There should be no devices that generate moisture or heat (radiators, sinks, etc.) within 2 meters.
After installation, the device must be sealed by an employee of the housing organization.

The need for replacement is determined by the serviceability of the device or the operating period (registered in the passport).

At whose expense is it produced?

The gas meter is the property of the owner of the house, so he is considered responsible for its condition.

According to Gosstandart order No. 125, the owner of the house bears full responsibility for:

maintaining the meter in proper condition;
verification of the device;
the correctness of the device readings and its performance.

In other words, the property owner is obliged to ensure that the meter is in good condition. If necessary, he must carry out verification and subsequent replacement of the device at his own expense. This is stated in Article 158 of the RF Housing Code.

The only exception is municipal buildings - in them, replacement work is carried out at the expense of the state, that is, the local administration. On average across the country, the cost of replacing a meter is in the range of 3-4 thousand rubles.

List of required documents for filing an application

In order to order the installation of a new meter, you must provide the following list of documents:

passport of the owner of the house (in its absence, it is permissible to use another identification document);
technical passport of the meter;
documents confirming the rights to real estate (purchase/sale agreement, house register, etc.);
if the applicant rents housing, then a rental agreement is provided;
technical plan buildings;
application (written in free form is acceptable);
approved house gasification project.

Important: the application must indicate all the characteristics of the device (serial number, model, etc.).

After the meter is replaced, to undergo the sealing procedure you will need to provide:

technical passport of the new device;
completion certificate installation work;
a document confirming the commissioning of a new meter.

Procedure

Having prepared the list of documents, you need to do the following:

Submit an application to a company that installs gas meters and conclude an agreement with it.
After some time (the period depends on the workload of the company), a specialist will arrive to check the equipment and take the necessary measurements.
After making preliminary calculations, the employee will announce the cost of the work. The service is usually paid for immediately (since you need to buy a meter).
Then, on the appointed day, a specialist arrives and replaces the metering device. After this, you need to take from him all the necessary documents (certificate of installation work, contract and certificate of putting the device into operation).
After which you need to contact the management company with an application and the necessary papers to seal the meter. This procedure carried out within 3 working days. If the Criminal Code has violated established deadlines, a citizen can file a complaint with the housing inspectorate.

Important! Such procedures should only be carried out by organizations with the appropriate license. Contacting a private specialist is unacceptable.

Video about choosing a gas meter

Any homeowner is interested in the high-quality operation of a gas meter. Without promptly replacing a faulty device, you will not be able to rely on the device’s readings, and paying according to government regulations is expensive.

Like everyone else technical devices, gas equipment has certain period operation. To avoid delays, it is better to take measures in advance to replace the gas meter.

Legislative framework

It is forbidden to change the gas meter yourself. The procedure must be carried out by specialists who have the right to carry out work on replacing gas equipment.

In safety requirements or labor protection instructions, gas-hazardous work must be entrusted only to workers with special training and confirmed qualifications. It is also prohibited by the gas service to replace the battery yourself.

If the nutrient element has run out, the technician removes the filling, loading the readings into the database before work. After removing the housing cover, the specialist carefully removes the electronic board with the battery and loads a new one in its place.

If you decide to make the replacement yourself, then after the procedure you still need to call a specialist to install a new filling.

Equipment service life

The service life of the meters depends on the manufacturer, on average from 12 to 20 years. The state has set the service life of the device at 20 years.

The need to replace a device may arise if its operational life or verification period has expired. The service life of the device depends on the type and brand of the meter.

Types of gas metering devices:

Electronic. They are distinguished by their portable size, high accuracy of readings, simple setup, noiselessness, ease of disassembly for replacement, and inspection once every 10 years. Suitable for domestic and industrial use. Cons – relatively high cost: $35-170.
Membrane. They are characterized by a simple design and high safety. Refers to budget option, cost 20-100$. The disadvantages include large sizes, high level noise, deviations in readings and frequent rechecks.
Volumetric. They are distinguished by their reliability, high throughput function, inspection once every 10 years, and reasonable cost of $20-120. Among the shortcomings noted increased level noise and large dimensions. Usually installed in factories and enterprises.
Rotary. They have a low noise level and mobile sizes, as well as an affordable price of $25-105. The disadvantages include frequent errors after long-term use and checks every 5 years.

Rules and procedure for replacing the device

At whose expense is the replacement made? Replacing the gas meter in the apartment and apartment buildings is carried out at the expense of the owner of the living space, since it belongs to you. Operating costs must also be paid by the owner.

This decree must be followed not only by owners of apartments, but also of private houses. According to Art. 158 of the Housing Code of the Russian Federation, the owner of the house bears all expenses for its maintenance.

If the gas metering device is located outside the apartment (for example, in the basement), then all measures for access to the device must be carried out by municipal services and completely free of charge, since in this case none of the residents is the owner of the device.

The subscriber is responsible for:

performance of the gas meter;
correctness of indications;
payment for verification;
delivery of the device for verification.

Necessary measures for replacing a gas meter in a private house, rules in 2019:

You must provide documents and write an application to the territorial management company.
It is necessary to order design documentation from the gas supply organization.
Experts evaluate technical specifications and supplying gas networks to the apartment or private house.
The subscriber must independently purchase a gas meter of a certain brand after consultation with a specialized company, and also pay for the design of its installation.
The owner of the equipment must pay for the dismantling of the old device.
After replacing and checking the gas meter, you must sign a certificate of completion of work.
Sealing.

When dismantling an old device, the subscriber must record the latest indicators and transfer them to the management organization.

According to Decree of the Government of the Russian Federation No. 354 of 2011 and the Rules for the provision of utility services, the period for replacing a gas meter in an apartment and in a private house should not exceed 30 days.

Calculation of utility bills for this period will be made according to the standard established by the state. After replacing the device, from the moment the application for sealing is submitted, the management organization must contact the subscriber within 3 days.

How much does installation cost?

Many subscribers are interested in whether they need to pay to replace a gas meter? The cost of installing a meter is 900-3000 rubles and depends on:

type of work and its complexity;
device brand;
location of installation of the meter (apartment or private house).

The cost of replacing the device must be clarified with the company that performs the installation.. The cost of the work is announced by specialists after studying the technical data of the gas pipeline.

The price depends on:

organization tariffs;
region of residence;
number of devices;
complexity of work;
the length of the pipe for outputting the device.

You should pay:

purchasing a device;
the work of a foreman in removing the device and installing the jumper pipe;
meter replacement services;
testing and repair of equipment.

The cost of replacement varies from 1,000 to 15,000 rubles, depending on the region and city. The average price for the service is 3-7 thousand rubles. If you decide to act on your own, then you will be fined for unauthorized gas connection.

What documents are needed to replace a gas meter:

passport of the owner of the property and its copy;
certificate of ownership;
passport or certificate for the meter and other gas appliances;
document with information about the latest verification;
house plan;
project for installing a device in a house with a list of gas consumption points;
agreement on technical VDGO.

The application should indicate:

subscriber's passport details;
contact details;
address for replacing the gas meter;
device model type;
device registration number;
the name of the company that installed the meter;
date of commencement of use of the equipment;
indicators of the device before replacement;
date of the next verification.

Verification or replacement?

If the service life of your measuring instrument comes to an end, then the owner also pays for the verification of the device.

Many owners consider this procedure inappropriate because:

you have to pay not only for verification, but also for dismantling and delivery of equipment to the laboratory for verification;
the subscriber also pays for installation and sealing of the device;
the verification period lasts up to 3 weeks, gas consumption must be paid according to the standard;
If the equipment does not pass verification, it will have to be replaced and the cost of verification work will be paid.

Thus, it is much faster and more profitable to replace the gas meter.

Source: http://zaschita-prav.com/zamena-gazovogo-schetchika/

Rules for replacing a gas meter in 2019

Individual metering devices have a certain service life, so replacing a gas meter is a necessary procedure. The need to install a new device may also arise due to premature failure of the mechanism.

The replacement procedure has clear rules that must be followed. Any violations of established standards will not allow the new equipment to be put into operation, and therefore the consumer will incur serious costs.

In what cases is replacement necessary?

The widespread installation of gas meters began from the moment Federal Law No. 261-FZ of November 23, 2009 came into force and should end on January 1, 2019.

Over the past period, gas flow meters have appeared in almost every house or apartment that is subject to existing regulations.

Exceptions, starting from 2015, were made only for owners of premises in which resource consumption does not exceed 2 cubic meters per hour.

If you have a metering device, due to a number of factors, it may be necessary to dismantle the old mechanism and install a new one. Reasons for replacing the gas meter:

Expiration deadline operation. For different models manufacturers give certain time, after which the unit must be written off.
Breakdown during the warranty period. If the meter fails due to a manufacturing defect or due to improper installation by certified specialists, a replacement with a working device is required.
Failure to pass a regular or unscheduled inspection. Each gas IPU has a fixed time interval, after which it is necessary to confirm the suitability of the device for further operation. An examination may be required due to broken seals, reading errors and damage. If it cannot be verified that the meter is working properly, a new one is installed.
Refusal to undergo verification. The cost of the procedure and accompanying actions may exceed the price of a new device. It is more economical to install another meter.
Complete failure identified by the owner or during inspection. Most manufacturers indicate the period during which the device serves without complaints. Due to various harmful factors, defects and irregularities, the operation of the meter may be disrupted earlier than the stated period.

The gas meter will need to be replaced if the IPU is considered outdated. The device often cannot pass certified diagnostics, so the resource supply company insists on installing a new model.

Attention! Change technical condition facility, installation of additional or more powerful gas equipment, transition to individual heating will lead to increased resource consumption. This will make it necessary to change the device to a new one with greater throughput.

Gas meter service life

The period of optimal operation of the mechanism is established by the manufacturer and must be written down in the accompanying technical documentation(passport). Devices are produced with the following parameters:

Average service life standard models varies between 12–16 years. An example is the SGMB 1.6 and KG 4 models.
Meters with a maximum service life of 20 years or more. The group includes brands of devices NPM G1.6, UBSG 001 G4, ETK GSM G4.

The service life of individual gas meters is considered a secondary indicator; the main parameter that you should pay attention to is the calibration interval.

Many manufacturers, along with the main service life, indicate an additional indicator - the average operating time. Typically the parameter is 10 years. Consumers often mistakenly believe that the meter is changed every ten years. In fact, the value is approximate; it allows one to obtain information about the standard period of operation in the absence of reference conditions.

How to replace a gas meter

A new IPU to replace the old one is installed according to certain instructions, which must be followed in order to avoid problems with the gas supply organization. Any deviation from the rules can lead not only to financial losses, but also to violate safety standards.

Required documents

The gas meter should only be changed by a representative of a specialized company. There is a number of information that needs to be prepared. To avoid complications, you should entrust all work to the employees of the gas supply organization.

If third-party certified commercial firms are used for replacement, it is imperative to coordinate the actions with the sales company. A representative of the utility service provider must record the readings of the old gas meter, and only then is it allowed to remove the seals.

The first to prepare an application for dismantling the IPU, which is accompanied by the following documents(copies):

certificates or equivalent papers that confirm ownership of an apartment or private house (land);
owner's passport;
documents accompanying the new and old flow meters;
technical design of the gas system;
service agreement (resource provision).

The old gas meter does not always need to be changed: if there are no visible malfunctions of the device, then first it is better to carry out an IPU verification, which will confirm or refute the advisability of replacing the device with a new one

If a replacement is made due to an increase in consumption, a specialist is initially called to assess the possibility of connection. If the new IPU is not equivalent to the old one, changes to the project are required.

A separate application is prepared to the utility service provider regarding the need to put the meter into operation and seal it. A list of documents is being collected, which is specified in the Decree of the Government of the Russian Federation No. 824 of September 19, 2013 (addition to the RF Government No. 354). List:

Data of the service consumer (premises owner): full name, passport, contact information. Basic information about the IPU. The name of the organization that will do (performed) the installation must be indicated. Additionally, you need to inform about the estimated installation time.
Technical documentation for new device gas metering.
Contract for installation of the meter, if the installation was carried out by a third party.

Note! Sealing of the measuring mechanism is carried out free of charge if the replacement was not caused by violations on the part of the consumer or third parties.

Procedure

When work is performed by gas supply organization specialists, the process occurs according to the following scheme:

If installation is carried out by commercial specialized companies, the procedure is not much different. The main thing is to notify the gas supply organization about all operations. The owner does not have the right to change the gas meter on his own.

Who should pay

The issue of making payment for replacing a gas flow meter is one of the most important. Misinterpretation of changes in acts that occurred in 2015 gave rise to the misconception that payment for work is not required: incompetent information can be found on some Internet sites.

In fact, earlier and in 2019 the following conditions apply:

According to the law, installing a meter in an apartment or house is the responsibility of the owner. The work is carried out at the expense of the owner.
Persons living in non-privatized housing can count on a free exchange of an old IPU for a new one.
Beneficiaries can receive reimbursement of part of the costs. List preferential category citizens in each region of Russia is different, so you need to find out the exact list from the social protection department.

There is a misunderstanding about whether sealing is paid or free of charge. Most often there is no charge for the service cash. If the device is replaced at the request of the owner or due to intentional or unintentional violations of operation, the consumer must pay for the sealing. The procedure is inexpensive.

What to do with the old meter

When readings are taken from the flow meter and dismantled, it is recommended to store the mechanism until the new IPU is finally registered. The used device can then be used for any personal business purposes.

If the meter is operational and not outdated, you can carry out verification and use the meter as a replacement for yourself or relatives. The period until the next examination will be calculated regardless of whether the mechanism is installed or not.

Source: https://4schetchika.ru/gaz/zamena-v-chastnom-dome-kvartire/

Replacing a gas meter: rules, deadlines, documents

Like any technical equipment gas meters have a certain service life. It depends on the type and brand of the device. It is better to take replacement measures in advance to avoid delays. In this article we will tell you how to replace a gas meter, when it is changed, and what documents you will need.

The procedure for replacing a gas meter in a private house and apartment

It is prohibited to change the gas meter yourself. This is done by gas specialists who have the right to carry out work to replace measuring instruments.

Replacing the meter yourself is fraught with serious consequences. It's dangerous! How to replace a gas meter? The algorithm will be as follows.

Step 1. It is necessary to contact the territorial management company that deals with gas networks. You must write an application and provide the required documents.

Step 2. Gas service specialists evaluate the technical characteristics for installing a measuring device in a room. At the same time, attention is also paid to the supply of gas networks to a private house or apartment.

Step 3. Purchasing a meter in specialized stores. It is better to entrust this to a specialist who knows exactly which meter to buy.

There are many nuances that an uninformed person may not know. You need to check the cost of replacing a gas meter with the company that will carry out the installation.

Experts will be able to quote the price for replacing a gas meter after studying the technical data of the gas pipeline in your home.

Step 4. After the gas meter is replaced, everything should be checked carefully. If the owner is satisfied with everything, it is necessary to sign a certificate of completion of work.

Step 5. Final stage after replacing the gas meter - sealing. Without this procedure, the measuring device cannot be put into operation.

When dismantling an old gas meter, the owner should record the latest readings in order to subsequently transfer them to the management company.

The gas measuring device is installed in accordance with the established requirements. It can be located at a distance of 80 cm from other gas equipment. The placement height above the floor must be at least 1.2 m.

What documents are needed when replacing a gas meter?

To apply for a replacement gas meter, you will need the following documents:

owner's passport and its copy;
document confirming ownership and a copy;
gas meter passport or certificate with a copy;
paper with data on the latest verification of gas equipment;
project for installing a gas meter in a residential area with a list of gas consumption points.

In the application sent to the management company for sealing and putting the meter into operation, you must indicate:

owner's passport details;
contact details for communication;
estimated start date for using the meter;
registration number of the measuring device;
meter model type;
the address where the gas meter needs to be replaced;
the name of the gas company that installed the device;
meter readings before replacement;
date of the next verification.

Decree of the Government of the Russian Federation No. 354 of May 6, 2011 established the Rules for the provision of utility services to owners and users of residential premises.

According to this document, the period for replacing a gas meter in a private house and apartment cannot exceed 30 days. During this period, utility bills will be calculated according to the standard established in your region.

After replacing the gas meter from the moment of filing an application for sealing management company must contact the owner within three days. If this does not happen, you have the right to contact the housing inspectorate and file a complaint.

How much does it cost to replace a gas meter?

According to the decree of the Russian government, replacement of the gas meter is carried out at the expense of the homeowner. This is because all the equipment in your home belongs to you. And that means operating costs fall on your shoulders.

This fact is established not only for owners of private houses. Art. 158 of the Housing Code of the Russian Federation clearly states that the owner of an apartment in an apartment building bears all costs for maintaining the premises.

So you will have to pay:

purchasing a gas meter;
the work of specialists in removing the gas meter and installing a jumper pipe;
cost of services for verification and repair of the device;
services for direct gas meter replacement.

The cost of meter replacement services will be determined by specialists on site. The price depends on the complexity of the work, the number of devices, the length of the pipe for the gas meter output, as well as on the region of residence and the tariffs of the organization.

On average, you will have to pay about 15 thousand rubles for the device, and for services to replace the gas meter no more than 7 thousand rubles.

All listed expenses apply to owners of private houses and apartments. If your home belongs to the municipality, then they must bear all the costs of replacing the gas meter.

What is better - verification or replacement of the gas meter?

If the verification period for your meter is coming to an end, you will also pay for the verification work yourself. Owners consider verification inappropriate for the following reasons:

you have to pay not only for the verification itself, but also for the dismantling, installation and sealing of the meter;
delivery of the gas meter to the laboratory for verification is carried out by the owner independently and at his own expense;
if the measuring device does not pass verification, it will have to be replaced, but the cost of verification work will still be paid;
The verification period may take up to three weeks - during this time the owner will pay for gas consumption according to the standard.

Therefore, it is believed that at the end of the verification period it is much more profitable and faster to replace the gas meter. The interval between verifications depends on the brand and type of measuring device. It can vary from 5 to 12 years.

Source: https://estatelegal.ru/zhkx/kommunalnye-uslugi/sroki-zameny-gazovogo-schetchika/

Reasons and procedure for replacing a gas meter

Calculation of payment for the use of resources by most citizens Russian Federation carried out on the basis of gas, electricity and water meter readings.

Any measuring equipment has its own specific service life, after which it must be replaced. In addition, in some cases, when after the next verification the device is found unusable, a new one is also installed in its place.

Replacement of the gas meter is carried out in accordance with these rules, and is carried out according to established order law.

Reasons for replacement and the need to pay for the operation

According to government decree No. 824 of September 19, 2013, a gas meter can be replaced for the following reasons:

After the expiration of the service life (operation) of the device;
In the event that the meter has not passed verification.

One of the main questions that concerns our citizens is whether they need to pay for verification or replacement of a gas meter. And if the verification of such devices in most cases is practically free, then completely different rules apply regarding the installation of a new one.

To understand who pays for the installation of a new device, you need to pay attention to the type of housing in which it is located:

In a private house. In this case, the clear answer to the question at whose expense the replacement will be made is - at the expense of the owner of the property. In the event that the owner of a residential building is an individual or legal entity, the costs definitely fall on him;
In the apartment. If this apartment is privatized, changing the metering device is carried out for a fee at the expense of its owner. If the premises are municipal, that is, owned by the state and provided for a citizen to live in, the installation of a gas meter is carried out at the expense of the state.

In addition, for certain categories of citizens, the law establishes a procedure for free replacement. These include:

WWII veterans;
Large families;
Low-income people who have reached retirement age.

Replacement procedure and cost

How much does it cost to replace a gas meter? The price for such a procedure will consist of several components:

Cost of the meter. It can vary depending on the type of device and amount to up to 30 thousand rubles;
Direct installation procedure. Its value depends on the region (for example, in Moscow it will be about 2500-3000 rubles). If during the replacement process it is necessary to change the gas pipeline system, another 400-5000 rubles will be added, depending on whether gas water heaters and stoves are installed in the house.

What documents are needed to replace the device? Their list is presented as follows:

Passport of the owner of the house or apartment;
Technical data sheet of the new device;
Documents for ownership of real estate ( state certificate, purchase and sale or gift agreement, etc.), house book;
Technical plan of the building;
Gasification project;
Application for replacement.

Implementation procedure necessary steps for changing the gas meter the following:

Filling out an application and sending it to the gas industry, which is responsible for territorial district the location of your house or apartment;
Appendix to the application necessary documents(ownership rights, etc.);
Visit by a specialist to your premises and on special occasions technical parameters issuing a conclusion on what type of meter can be installed. In addition, the owner is informed of the amount for the replacement service;
Purchase the meter itself. Very important point is to buy it in a specialized store. Sometimes, wanting to save money, citizens buy the device secondhand, on the market, but such a procedure is fraught with the possibility of purchasing a faulty meter or one with any defects. Particular attention should be paid to its service life indicated in the passport. Since its duration is counted not from the moment the work begins, but from the release by the manufacturer;
Installing the meter, signing the work acceptance certificate and making payment;
Putting the device into operation by sealing it.

Source: https://cabinet-lawyer.ru/zhkx/zamena-gazovogo-schetchika.html

Rules for installation and operation of gas meters

“According to Russian legislation, in the private sector the installation of gas meters is mandatory, but in apartment buildings it is at the discretion of the apartment owner. Since 2016, amendments to federal law"About energy saving".

When the apartment only has a gas stove, that is, the consumption rate is less than 2 cubic meters per hour, there is no need to install a meter.

In apartments where there is a stove and geyser, that is, the consumption rate is more than 2 cubic meters (you can clarify the indicator in the data sheet by adding up the consumption figures for the gas appliances that you have installed), the meter is more profitable for the consumers themselves,” explained the Crimea Gas Networks.

The company added that for the initial installation of a gas meter, you need to take an attorney included in the Russian register. If the consumer has a Ukrainian-style meter that is certified and works properly, there is no need to urgently change it. The calibration interval for gas meters varies – from five to ten years. The meter must be submitted for verification after the end of the verification interval.

If the meter was installed before 2014, but is included in the State Register of the Russian Federation and has undergone periodic verification, then there is no need to change it. If the meter type is not in the register, verification must still be carried out according to the verification interval. This meter must be replaced by 2020.

The press service emphasized that the dismantling of the meter for verification is carried out by employees of the State Unitary Enterprise "Krymgazseti".

To do this, you must submit an application at your place of residence to your gas management department, with which an agreement has been concluded for the supply of gas and the conduct of VDGO. Self-installation gas meter is prohibited. Meters installed by uncertified companies will not be accepted for use. To accept the BSG into operation, an application to Krymgazseti and an installation project are required for inclusion in the as-built technical documentation.

The company recalled that since November 14, prices for installation, replacement and dismantling of household gas meters have been reduced.

Currently, gas is used in almost all homes: be it an apartment or a private house. Naturally, tariffs for all types of housing are different, but still very high. Since every owner of a residential property is obliged to pay bills for public utilities, the amounts in the receipts noticeably hit the wallet. It is possible to save on gas bills by installing a gas meter.

The article presented to your attention contains information that answers some important questions.

What actions are taken when installing a gas meter?

Gas meters are complex devices, so installing them yourself is prohibited, as there is a threat to life. There are special services for these purposes.

Connecting a device to measure gas consumption is preceded by a number of mandatory procedures.

Before installing it, you need to prepare some documents (originals and copies):

passport of the property owner;
living space plan;
passport of the new device (if it has already been purchased);
certificate of ownership.

Important! If the tenant has not purchased a meter, it is necessary to prepare in advance a list of gas-powered equipment used in the residential premises. As a result, Gorgaz service employees themselves will offer the appropriate type and brand. You can also contact this service for help even before submitting documents.

If a positive decision is made, the organization signs an installation agreement with the owner and issues a check for payment for all installation work.

After submitting a receipt for payment to the gas service, the terms and availability of materials needed for the work are discussed. On the appointed day, the device is installed and sealed - only after this action can the meter be used by taking readings. If it is not sealed, the owner will have to pay the difference between the amount according to the indications and the amount according to state tariffs.

Gorgaz is required to register this device in the system.

Gas Meter Law

The use of devices for measuring gas consumption is regulated by the legislation of the Russian Federation, namely Law No. 466-FZ.

Important! Since 2009, the installation of meters has been mandatory. And therefore citizens had to register them before January 1, 2015. However, every year the situation in the country changed. And in 2014, amendments were made to this law.

Now, according to this document, mandatory installation has been postponed for 3 years – until January 1, 2019. The rule applies only to those houses (both private and apartment buildings) in which gas consumption exceeds the volume of 2 cubic meters per hour. The rest were not affected by this law either in 2009 or 2014.

Actions to change gas meters are regulated by Law No. 4871 of April 27, 1993 “On ensuring the uniformity of measurements.”

Letter regarding removal of gas meter

The owner of the property must monitor the condition of all equipment located in the residential premises. This also applies to gas meters. The gas service periodically inspects this equipment at the request of the owner, as a result of which it becomes necessary to remove it.

Therefore, gas service workers are required to notify the tenant of the end of the verification period or the need to replace it in writing.

Gorgaz is required to register this meter in the system.

What documents are needed to replace a gas meter?

Gas meters, like any equipment, become unusable over time. There is no efficiency from the operation of such a device, so you have to pay according to the tariffs established by the state. Thus, there is a need to replace it.

In order for such a procedure to be considered legal, and for the gas meter readings to be taken into account when calculating fees for utility services, you need to prepare a package of documents for the gas service.

List of documents that are needed to replace devices for measuring gas consumption in apartments and private houses:

passport of the owner of the living space;
certificate of ownership;
passports of the new meter;
building plan;
gasification project;
certificate of absence of arrears in payment for utilities;
application for replacement of a gas meter.

Actions when replacing a gas meter

When replacing a gas meter, the actions are practically no different from those when installing it. After preparing all the necessary documents, they are submitted to the gas industry. Next, a specialist comes to the owner to re-check premises for compliance technical requirements, writes a check for the work. Now you will also have to pay for dismantling the old device. After installing a new device, it must also be sealed, otherwise the readings will be invalid when taken.

What is the cost of replacing a gas meter

According to the legislation of the Russian Federation, all costs for replacing equipment located in a residential premises, including the gas meter, are paid by the owner.

The owner will have to pay for:

the meter itself;
the work of specialists to remove old equipment and install the necessary fasteners;
verification services;
installation of a new meter.

On average, when replacing gas appliance you have to pay 22,000 rubles. However, some citizens are entitled to free installation. These include:

WWII veterans;
large families;
disabled people.

As already mentioned, to save your own budget you need to install a gas meter, since when calculating the amount of payment for utilities, only actual gas consumption will be taken into account. Otherwise, the data calculated for the entire house is entered into the receipt.

Thus, homeowners themselves should be interested in installing devices to control gas consumption.

As a rule, the question of replacing a gas meter arises when its state verification period begins to expire.

Basically, there is nothing complicated here, but there are rules for installing gas meters that cannot be deviated from. How to replace a gas meter?

First of all, you need to know that the gas meter is not considered a gas-using device, but it is in-house gas equipment.

All work on installation, repair, and replacement of this equipment is carried out only by specialized organizations. All specialists of these organizations are trained and have access to gas hazardous work. Thus, it turns out that you cannot transfer the gas meter yourself.

Only representatives of the gas supplier can tell you how to replace a gas meter without breaking the rules.

In order to avoid all sorts of mistakes, as soon as the next deadline for checking the gas meter approaches, you should check with the organization that provides you with gas about the procedure for carrying out this procedure.

It would be correct to submit an application for replacement of equipment to an organization that monitors in-house gas services. Then notify the person who will perform the services the time and date of the meter replacement, and also insist that he be nearby at this time.

You will need the control of the performer so that he writes off the evidence taken and installed meters, and also to seal the meter.

If you insist on the presence of an inspector when replacing the meter, you will eliminate any possibility of various controversial issues arising regarding the readings removed meter, its serviceability and the fact that the gas service seals were intact at the time the meter was removed.

If the seal on the new meter has not yet been installed at that time, then the person performing this service is obliged to send a representative no later than 5 working days to carry out the sealing of the meter.

Moving a gas meter

You can also use a replacement meter when moving it to a completely different place. So, when the meter was installed on the street, and in winter time due to snow drifts, it has become inconvenient to take its readings; in this case, it is necessary to make changes to the gas supply project and install a new meter in another convenient location.

In order to transfer the meter from the street to warm room This is evidenced by the fact that meters that were produced for installation outside will cost much more than meters for installation inside.

Naturally, you can do the opposite: move the meter from the house to the street so that the not particularly attractive device does not spoil the overall appearance.

For all owners of cottages or private houses, installing a gas meter involves certain expenses. In order to do everything properly, you need to put in a lot of effort.

First of all, you need to choose the right counter. Today there are a huge variety of models, each model has its own price.

It is worth noting that the time has long passed when energy resources were issued according to standards. Current legislative acts have established firm rules for equipping all premises where utilities are supplied with metering units.

Of course, all utilities without exception are subject to accounting, including gas. Great attention is paid mainly to three resources: electricity, gas and thermal energy.

Each gas equipment to which the meter belongs has a period during which it is operated. Basically, this period ranges from 8 to 10 years.

Thus, all meters that were installed back in the 2000s have expired and need to be replaced. But there is an option in which you can remove the old meter and send it to a laboratory for examination. There the meter will be checked and a conclusion will be given on whether it can be used in the future.

The meter inspection takes two to three weeks. During the period while the meter is in the laboratory, payment for gas consumed will be charged based on the heated area.