Do-it-yourself frame houses made of metal profiles. House made of metal profiles: technology and features of lstk. what is a steel frame and how to build it

On at the moment When constructing various frames, installers often use pipe steel profiles. Frames fromprofile These tubes have several positive properties - tubes for such structures are easy to find, give them the required shape and install in the right place.

House frame made of metal pipe quite durable and reliable

As a result, profile tubes are in great demand among owners of private houses who assemble the house frame themselves.

In addition, frame houses from metal profile builders build in a short time.

This article talks about how construction occurs frame house: how the insulation of a frame house is done, in what places the electrical wiring is installed in a frame house and other nuances.

Do-it-yourself installation of a house frame and roof from a metal profile pipe

A metal frame house has the following advantages:

has a low cost (when compared with houses that are built using traditional technologies). In many ways, the cost of a frame metal structure depends on what material is used in the construction of the building. The cheapest houses are those built on a wooden frame. A metal house is significantly more expensive - its cost is directly related to the cross-section of the tube;
house frame - the use of a profile tube - significantly reduces the construction time of such a structure;
When constructing residential buildings from a metal frame, workers do not carry out “wet” construction operations (with the exception of laying the foundation). As a result, a metal frame is installed both in the summer - during snowfall and during rain, respectively;
When constructing a residential building from a metal frame, builders do not shrink.

It should be noted that build frame house much cheaper than building a house conventional technologies. IN similar situation the future owner of a private house can hire 1 construction team, which will install the frame in 1 month.

Workers assemble such a frame with incredible speed, since the work is very simple

Assembling a house on a frame from a profile pipe: construction of a house from a metal frame and more

Foundation. A metal frame can be installed without first constructing a foundation when constructing structures that can be moved from one place to another - for example, greenhouses, greenhouses. In such a situation, builders make certain changes to the calculation of the frame;
Frame structure made of profile tubes. When installing frame structure For cottages and other residential premises, builders use profile tubes, the square cross-section of which is 100×100 mm or 60×60 mm. In order for the calculation of the frame - determining the size of the tubes - to be more accurate, working tubes;
Interior finishing. A similar finishing of a frame house is made from tongue-and-groove boards, the width of which is 40–60 mm - it is made of coniferous trees. In this case, the boards are treated with an antiseptic and an antipyretic - a substance that reduces the flammability of the wooden covering;
Subfloor - boards that are laid on top of profile tubes. Then, the subfloor is covered with a special floor covering;
. The most commonly used insulation for frame houses is extruded polystyrene foam, the thickness of which is 60–100 mm. The frame rack itself is separately insulated with strips of penoizol;
Exterior finishing. When finishing the exterior of a house, builders use facade plaster, siding, etc.;
Roofs are made of a profile tube, which is considered both a separate house structure and a part of the frame.

The roof frame is also made from a profile tube

Calculation of the load on a profile pipe is done taking into account what material is used for the roof of the house: the lightest roof has the largest angle - while installers use the thinnest pipes. A metal profile frame can be erected very quickly by experienced workers.

Stages of construction of a frame house

When building a house from a metal frame, builders perform the following actions:

first, workers place 1 of 2 types of foundation: permanent - on concrete or non-permanent (on a platform).

Those that have a non-permanent foundation are considered transportable - they can be easily transported from one place to another;

After the foundation is built, builders install the frame of the house.

If, when constructing a house, the future owner of a private house uses a factory frame, then in a similar situation the cottage and other living quarters are assembled on the basis of a finished frame structure. In this case, homeowners do not weld screw connections.

If the future homeowner makes the frame of the house with his own hands, then in such a situation he checks the quality of the welded joints - the frame’s “Achilles heel”.

Installation metal frame done from the bottom up. In such a situation, workers first install several racks and columns, and then they are connected by thin tubes and reinforced with braces.

After completing the installation of the frame structure, workers begin finishing the inside of the house.

Electrical wiring in a frame house

Laying electrical wiring in a frame house is considered a difficult task. In such buildings, electricians install open or hidden wiring.

Open wiring in a frame cottage and other residential premises is installed in the same way as in an ordinary house. But hidden electrical wiring has its own characteristics.

It is better to entrust the wiring in the house to an electrician.

Hidden wiring

Electricians install hidden electrical wiring in metal tubes - boxes. boxes is IP4X and higher, and the wall thickness is 2.5–4 mm.

Inner surface - such coatings protect pipe walls from corrosion.

When installing a metal box, installers use welding or threaded connections - in such a situation they make pipe turns and bends.

Laying metal pipes - the installers install the box with a slight slope - as a result, the condensate that forms in the pipes flows out.

The installed tubes are grounded. When installing tubes, do not allow the installation and distribution box to rupture.

WATCH THE VIDEO

When purchasing a pipe for laying hidden electrical wiring, the owner of a frame cottage must choose the optimal pipe diameter. In such a situation, the electrical cables must fit freely into the tube, occupying 40% of the cross-section of the tubular product.

Installers edge the ends of the tubes with plastic bushings - while the wires remain undamaged.

As a result, the experience that the homeowner will gain from independent construction frame house, will be useful to him in future years - both when renovating his living space, and as another profession! The metal profile frame is a reliable design.

Ratings 0

A metal frame for a house will help you build inexpensive and reliable housing in a short time. These structures were mainly used for the construction of industrial and commercial buildings, due to the high thermal conductivity of the material. With the advent of thermal profiles and different types insulation, metal frame houses have provided significant competition to wooden ones.

A metal frame house can be built in both classic and modern or high-tech styles

Features of frame houses made of metal profiles

The profile house consists entirely of metal structures. They are the basis of walls, ceilings and roofs. The thickness of the profiles used depends on the load-bearing loads.

Features of such buildings:

because of light frame the weight of the entire house is reduced;

a house made of a straight steel profile can be erected quickly and does not require the use of many construction tools.

Despite the emergence of new technologies in construction, a metal house requires additional thermal insulation, since this material has high thermal conductivity. The choice of one or another insulation depends on climatic conditions in which the house will be located

The metal used in the construction of such houses is durable, does not rot or burn, and does not require additional processing. The material can be completely recycled without harming the environment.

Construction work is carried out in any season, regardless of the weather. The steel frame is suitable for the construction of low one-, two-, three-, and four-story buildings.

Advantages and disadvantages of houses made of metal profiles

Construction technology frame houses made of metal is becoming increasingly popular. This is facilitated by a number of advantages of this material.

A metal frame house is much lighter than a wooden or brick one. When performing work it is used less material, which makes it possible to build a lighter and less solid foundation. The most commonly used are strip and pile types. Installation work are carried out faster. Their cost is significantly lower than when working with wooden base Houses.

Since a house made of metal profiles is much colder than a house made of wood or brick, the technology of lightweight thin-walled steel structures is used in its construction. In this case, the profile is protected from heat transfer by additional insulation, which fills the entire space between the frame racks. As thermal insulation materials use mineral wool, polystyrene foam, ecowool, expanded polystyrene. These materials are not expensive and also have good soundproofing qualities.

Insulation plays an important part in creating a warm and environmentally safe home

By correctly making the so-called “pie” for insulating the walls of the house, in compliance with the technology of protection from wind outside and from steam inside, you can achieve maximum insulation of the house.

A frame house made of metal profiles, despite the lightness of steel structures, is quite durable. Its service life reaches 100 years. Reliability is achieved by using galvanized profiles equipped with stiffeners. The coating of the material protects it from corrosion. The frame of a metal house does not shrink over time, does not crack, has good fire safety and is not affected by pests.

To reduce the electrical conductivity of the material, metal frame buildings are equipped with proper grounding. To decorate the house outside and inside, materials that are themselves dielectrics are used. This complex of works ensures complete insulation of metal parts.

An important advantage of a steel frame is its ability to withstand roofing materials having a lot of weight.

The disadvantage of using a metal frame is its rapid destruction during a fire. Due to high temperature, the metal loses its rigidity and becomes deformed. In this case, the house collapses much faster than a wooden one.

In such a house it is difficult to install built-in furniture and household appliances. To install massive cabinets and other devices, additional reinforcement of the installation site with profiles is necessary. It is difficult to combine a steel profile with materials such as cement or brick. This is especially inconvenient when building a fireplace or other structural elements Houses.

Video description

The following video details the features of constructing a house from LSTK:

On our website you can get acquainted with the most from construction companies presented at the exhibition of houses “Low-Rise Country”.

Types of steel profiles

For the manufacture of elements of lightweight thin-walled steel structures, durable structural steel is used. The product itself is made using the cold stamping method. To protect against corrosion, a zinc coating is applied to the metal sheet.

Metal structures are also made from hot-dip galvanized sheets. They are used less frequently due to their high cost, but are much more durable in use.

To produce the profile, a sheet of steel from 0.7 to 2 mm is taken. The choice of thickness is influenced by the required bearing capacity structural element.

Apply following types profiles:

guides,

rack-mounted,

Special beams are also used to cover the floor and shelf. The rafter system of the building consists of the same elements. All elements of the metal frame structure are connected using bolts, rivets, and self-tapping screws. In some cases, resistance welding is used.

Stages of building a house from a metal profile

The stages of construction of a metal frame house are the construction:

foundation;

insulation of the structure;

home decoration.

Foundation

The frame made of metal profiles is lightweight and does not require construction capital foundation. Before choosing the type of foundation, you should study the nature of the soil on the construction site.

For such a house, a shallowly recessed one is quite suitable. strip foundation. It can be small in width, since the load is from a lightweight steel structure it will be small. The base is made as a rigid horizontal frame, which allows you to redistribute the load in case of deformation of the base.

When using columnar foundation the frame is made of beams rigidly connected to each other and mounted on supports.

A pile-screw foundation with 200x200 timber frame is ready for attaching a metal frame

Brick, reinforced concrete and monolithic blocks are used for the foundation. The construction of shallow foundations allows you to save concrete consumption and reduce labor costs, which in turn reduces the cost of the house.

On our website you can find contacts of construction companies that offer. You can communicate directly with representatives by visiting the “Low-Rise Country” exhibition of houses.

Frame assembly and roof installation

A turnkey metal frame house consists of mandatory elements that affect the reliability of its operation. These include:

horizontal frame;

metal columns that serve to connect the frame to the foundation;

vertical columns;

roof trusses;

purlins for fastening wall panels.

The rigidity and stability of the frame in all three directions is created in compliance with the rules for installing the main structural elements: frames, trusses and columns. This is achieved in compliance with the rules of spatial geometry. All products are made with high degree accuracy.

To speed up the installation process, each product is marked accordingly. The structural elements of the future house are delivered to the construction site in disassembled form and are assembled on site. Some modules are delivered ready-made.

Ready-made wall panels with openings for windows reduce time for assembling a house

Not only the individual elements of the frame base, but also the completed wall panels are assembled directly at the factory. In some cases they are equipped with windows, heating system and cladding. Wall modules are installed on a support frame and connected to the steel span structure by welding and threaded fastening.

The roof of a house made of metal profiles can be:

single-slope;

gable.

Depending on the shape of the house itself, the roof can have a complex configuration. The most common types of roofs for metal frame houses are single- and double-slope.

The elements of the steel roof structure are load-bearing trusses, rafters and spans. The work itself is no different from constructing a roof from other materials. First, they build a rafter system and make the roof sheathing. Then steam and waterproofing is carried out and the finishing roof covering is laid.

This is what the roof insulation scheme looks like

Galvanized steel is used for rafters. C-profile thickness from 0.8 mm – 1.2 mm. The sheathing is made from steel profile beams of rectangular or square section. Place on top of the sheathing vapor barrier film, insulation and waterproofing material. Slate, metal tiles, ondulin and other materials are used to finish the house.

Insulation of the house

Insulation of a house made of a metal profile is carried out with expanded polystyrene and mineral wool. Polyurethane foam is also used. The space that is filled with any material must become dense and effectively retain heat. All cavities inside metal profiles are filled with foam.

From the inside, the surface of the walls of a metal frame house is covered with a vapor barrier material, and on the outside, a thick film is attached to protect it from the wind.

The openings between wall panels are also filled with new materials such as gas and foam blocks, which contain insulation.

For external decoration of walls, plastering of the surface is used, natural stone, brick and siding.

Video description

The process of constructing a frame house from a metal profile in this video:

Projects and cost of houses

The cost of a metal frame house includes expenseson:

materials;

installation work.

You can slightly reduce the cost of a finished house by ordering a standard building assembly. The price of housing itself is not much different from a similar one made of wood or brick. A two-story cottage made of sandwich panels, with dimensions of 7x10 meters, will cost about 1.7 million rubles. However, the price depends on the configuration of the house. If you order only warm contour, then the cost of the “box” will be about 1.32 million rubles. A house with rough finishing costs about 1.75 million rubles.

Metal frame house projects are varied:

Metal frame house in half-timbered style

Small metal frame house with attic floor, with a total area of 72 square meters, is intended for families with children. The house is convenient to use, with a sufficient number of living rooms. In construction, ferrous metal is used for manufacturing load-bearing structures and galvanized thermal profile for wall panels. The structural elements of the house are connected using self-tapping screws.

The cottage is being built without the use of special equipment.

One-story metal frame house with garage

Made of metal structures that can withstand the necessary loads. Exterior finishing – decorative plaster. Possible finishing options are brick or siding. Roof type – metal beams, roof covering - metal tiles.

Classic house with attic

Quite often buyers prefer projects two-story houses or cottages with a residential attic. There are no restrictions in the design - the project can be chosen with a garage, balcony and other extensions.

Conclusion

In terms of design, frame houses made of metal profiles do not impose any significant restrictions on architects. True, after construction, the house will not be able to be redesigned over time, but this is a feature of many technologies.

Special attention should be paid to the insulation of a LSTK house. Since the metal has good thermal conductivity, in order to eliminate the appearance of cold bridges, it is required special approach to insulation and strict adherence to technology. For this reason, the construction of a LSTC house should be carried out by professionals who will guarantee their work.

Ratings 0

Our company “LSTKstroyGroup” brings to your attention ready-made projects based on a frame made of LSTK. If you are not ready to independently develop and think through the entire future construction, then you can familiarize yourself with our proposals and buy one of the ready-made projects presented by us. This can be a building of large or small sizes, which will be based on a metal frame made of galvanized thermoprofile LSTK (Light Steel Thin-Wall Structures) and finishing quality materials, suitable in a given situation.

First of all, we always focus on the wishes of our client, so if necessary, we can recommend any option for a residential building for purchase. The basis for our recommendation will, of course, be the conditions set by the customer. If you are sure that you cannot select any of the options presented on our website, then we suggest leaving a request for our designers.

Thanks to the experience of our specialists, according to your application, we will create an individual project for a prefabricated building ( private house, industrial building), and we will also produce a metal frame from thermoprofiles. A full construction cycle is also possible, from the design of a prefabricated building to turnkey delivery.

Catalog of prefabricated houses

When building a residential building, we suggest you immediately think about other buildings - such as a garage and a bathhouse.


Garage 6x4 m. gable roof type 3	Garage 6x4 m. pitched roof type 2	GARAGE FOR 3 CARS - 60 sq.m.	Garage 6x4 m. pitched roof type 1

	BATH - 29 sq.m.	BATH - 36 sq.m. (6x6)

Production of prefabricated houses

Not everyone wants to buy a project that, most likely, has already been installed somewhere else. This is especially true for residential country houses. If you do not want to buy residential buildings presented in our catalogue, we can suggest you contact our designers. Based on LSTK, they will be able to construct a frame for you, which in the future will become a full-fledged country house.

What will be the features of our proposal? Our specialists work efficiently and always take into account the basic wishes of clients. We have no idea possible work under any other conditions. It is customer focus that allows us to create excellent residential buildings. Every element has been worked out in them so that no inconsistencies arise during the construction and erection of the structure.

Therefore, by contacting our planners, you can count on successful production and completion of construction. Adequate recommendations for use building materials inside the frame made of LSTK will provide you with a durable structure. However, you can count on durability when choosing our standard prefabricated buildings. The LSTKstroyGroup company guarantees their quality by independently checking each frame for compliance with all norms and rules. You no longer have to look for where to order finished building or the layout of the next building according to the desired parameters. Our company will provide you with everything you need for have a nice life in a suburban (or urban) area.

Our specialists with as soon as possible will provide you with structures made of light steel thin-walled structures, inform you about necessary materials and components at your site. Only a well-developed project can cope with any task assigned to it, and our company will do everything to ensure that your object is the result of just such a project.

Advantages of prefabricated houses

Prefabricated frame houses built using modern LSTC technology (light steel thin-walled structures) have a number of undeniable advantages:

	Light weight Due to the insignificant weight of the enclosing structures ( external walls) do not require the cost of reinforced foundations. Such buildings can be mounted without fear on bored, screw piles without fear of shrinkage and “swelling” of the soil. The distance between the ground and the floor partition of the house can be used for storage gardening tools, building materials not subject to temperature changes, etc. A shallow foundation with a grillage is also sufficient.
	Construction time The speed of construction is significantly reduced due to the absence of lifting equipment at the construction site (during the construction of private houses). Metal frame of a prefabricated building up to 150 square meters will gather both a team of experienced specialists in the amount of 2 people, and non-experienced specialists in the amount of three people, in a maximum of seven days. First you need to study the design of the KM stage (this is the main instruction for assembling a metal frame from a thermoprofile), which will not take much time.
	Lack of highly specialized specialists During the construction of prefabricated buildings, workers of such specialties as: masons, carpenters (for the construction rafter system), etc. The metal frame is delivered directly from the factory, all thermal profiles are of the appropriate size in accordance with the project and do not require “adjustment” on site.
	Construction cost Prices for prefabricated buildings (metal frame) are much lower than other technologies. Many people argue that a wooden frame is cheaper. When lumber is delivered to the construction site, yes, it is cheaper. But when the customer starts hiring experienced specialists for assembly, he realizes that it is not cheap at all. You need to cut the material to the appropriate size, purchase metal corners for complex load-bearing units. This is where the expenditure of funds begins. Few people pay attention to the proper antiseptic treatment of wooden frames. According to construction standards, antiseptic treatment is required every three years, and this is an additional expense cash to purchase adequate products and pay labor.

These are just a few examples of the fact that the construction of prefabricated houses using modern LSTK technology is today less labor-intensive and will allow you to save a significant amount of money. You can find out about other advantages of houses based on a metal frame made of galvanized profile by calling the specialists of the LSTKstroyGROUP company or sending your questions to email companies.

Stages of construction of quickly erected houses

Laying the foundation.
Assembly of metal frame.
Arrangement of engineering systems.
Clean finish.

You can see detailed information on all stages of construction.

If you have not found the building or design you need on our website, you can send a request and our designers will call you as soon as possible

Frame houses have confidently occupied a niche in private housing construction. Traditionally, the frame for them was made of wood, but modern technologies Now they allow you to quickly assemble frame houses made of metal profiles. Before you start building with your own hands, you need to familiarize yourself with this method of construction in more detail.

Is it worth choosing?

When building your own home, many questions always arise. I want to build the best, warmest and most reliable house for myself, so the main question is: is there any experience in using such technology, is it trustworthy?

A metal frame house is assembled from individual elements that are delivered to construction site in disassembled form with subsequent installation

Frame houses made of metal profiles are simplified miniature versions of skyscrapers and large long-span buildings. The difference is that in the construction of large buildings, massive rolled steel (channels and I-beams) are used, while houses made of metal profiles require the use of lightweight thin-walled elements (LSTK). The raw material used is the same – steel. But the thickness, dimensions and load-bearing capacity of the products differ.

Using large rolled metal for DIY construction is not economically profitable because:

the cost of wall and ceiling elements increases significantly;
a large mass of parts leads to an increase in the load on the foundation and an increase in the cost of the structure;
the loads during the construction of private residential buildings are negligible compared to the loads in large industrial and commercial buildings, so there is no point in using powerful beams and racks.

Therefore, we can say with confidence that the technology is time-tested. The advantages of a metal frame include:

high strength of the material;
low weight allows maximum savings on foundations;
resistance to rotting and damage by fungus and mold;
high installation accuracy;
cheaper transportation;
absence of garbage and waste at the construction site4
the possibility of building houses with large spans and an open layout.

The disadvantages include:

Construction from metal structures - advantages and disadvantages

susceptibility to corrosion (rust);
high thermal conductivity (transmits heat);
reduction of evacuation time from the building in case of fire (loss of rigidity at high temperatures);
difficulty in securing hanging interior elements and furniture;
the need for potential equalization due to high electrical conductivity;
limited construction area (not suitable for massive elements).

Despite all the shortcomings, it is necessary to take into account that the speed of construction of the structure is quite high, and the simplicity of the work allows you to do the construction yourself.

Construction technology

When doing work with your own hands, it is important to proceed in stages. Consideration of the issue begins with the development of design documentation.

Project stage

All frame structures are manufactured in one factory according to pre-ordered dimensions. Even if execution is planned construction work do it yourself, when designing you will need the help of a specialist. Here the future owner has three options that differ in cost:

Option complete assembly houses on a steel frame (LSTC technology)

choose from ready-made projects and order from the factory all the elements necessary for assembly (the cheapest);
choose finished project and make small changes to it (optimal);
order development individual project(the most expensive).

Usually the project includes the following composition:

floor plans, roofing;
building facades;
3-D model of the house (not always);
necessary drawings and components for frame elements.

You can do without the help of specialists and develop a project yourself based on standard metal frame elements, but this is a difficult task.

Construction of the foundation

When constructing any facility, work begins with the foundations. The choice of support type is made based on the geological data of the site. In most cases for a light frame house optimal choice for construction with your own hands will be: a shallow strip foundation, a pile-grillage foundation.

The first type allows you to place 1-2 storey houses made of light materials on foundations with good characteristics soil. The second option is suitable for heaving soils with not very good strength characteristics.

Frame assembly

From the factory, frame parts made from light steel frames arrive numbered and separately packaged. This greatly simplifies the DIY assembly process. The kit includes:

vertical and horizontal frame profiles with the necessary openings for utilities;
set of fastenings.

The parts come in the required length, there is no need to cut or adjust anything. The DIY assembly process is reminiscent of children's construction set. You just need to use the manufacturer’s instructions, install the profiles in the designed position and secure them with the proposed connecting elements. At this stage, difficulties should not arise if you follow the instructions and carefully check the labeling of the elements.

Important! To make the frame, it is recommended to choose a Z-shaped profile with grooves or perforations. Such an element, although made of “cold” material, allows heat to be retained. The second name for such an element is thermal profile. This is the most desirable option for private residential housing construction.

Insulation and enclosing structures

The final stage of assembling the building box will be the cladding of the frame. The work here is carried out using the same technology as for wooden frame houses. Covering options:

Assembling structures with your own hands. The outer side of the metal frame is sheathed with corrugated sheets or glass-magnesium sheets, and insulation is laid between the racks. Mineral wool or extruded polystyrene foam can be used as thermal insulation. If your budget is limited, you can consider more cheap option– polystyrene foam. When using foam or mineral wool it will be necessary to install a vapor barrier with inside and waterproofing from the outside. The inside sheathing can be done with plasterboard. The exterior finish is fixed to a profiled sheet.
Sandwich panels. They are made at the factory, where they can be painted in desired color. Simplify and speed up the assembly process. The advantages include: resistance to aggressive environmental influences, high temperatures and fire, high thermal insulation characteristics, environmental friendliness and safety for humans. Another advantage is that the panels simultaneously act as insulation and exterior finishing, reducing work costs.
Heat blocks. Modern material, which is a “brick” that includes a layer of porous expanded clay concrete, a layer of expanded polystyrene (foam) grade 25 and a facing layer of expanded clay concrete. The cladding is made of high-density material and is ready for painting. The advantage of the technology is the simultaneous creation of thermal protection and enclosing structure. Masonry joints are accepted to be no more than 5 mm. Conventional masonry mortar for bricks cannot meet this requirement, so special mortars or glue are used. Every 4 rows of blocks, reinforcement is required to increase strength.

Construction is always associated with large expenses and a lot of problems. It seems that this will last forever. This is what clients thought before, when they were not familiar with the technique of building houses from LSTK.

Today, the technology for constructing inexpensive panel-frame houses allows you to buy or build them on a turnkey basis in a matter of days, and what is most important is that you can live in it permanently, without moving to a city apartment for the winter.

Turnkey house made of metal frame

Buying a frame house does not always mean purchasing a finished building. Selling a house sometimes comes down to delivery to the site. In this case, the buyer is responsible for assembly and finishing independently.

The cost of the “turnkey house” service is the price of the project plus the house kit (frame, fastening materials). Additional work(assembly, finishing inside, outside, etc.) the client chooses at his own discretion.

Which is better: buy a house kit or ready house

The company "Euro Stroy" is engaged in the sale, as well as their turnkey construction. The client is free to choose the project and materials. He decides what kind of house it will be: a small one-story dacha or beautiful house 6 by 8 m with an attic. It is noteworthy that in both cases it will be an economical option for a residential building when compared with the cost of a similar structure made from other materials. By choosing the “turnkey house” option, you:

You don’t risk making mistakes when assembling the frame;
Don't waste time on construction;
Rely completely on the experience of employees;
You can control the process at all stages of construction;
You receive a finished house on an empty plot 8-16 weeks after laying the foundation;
Don't pay for shipping finishing materials;
You get a guarantee.

We build comfortable houses from a special thermal profile - you see the options in the photo. Let us decorate your home beautifully decorative panels German company Döcke Extrusion. You cannot distinguish it from an expensive elite brick cottage. We will adapt the project to any layout. We will arrange a separate room for a swimming pool or winter garden. We will create an elegant terrace with a balcony, professionally glaze the windows or make panoramic glazing. For convenience, we will add a garage and provide heating. The main thing is that it will take a maximum of 2 months. The final deadline will depend on the complexity of the project. .