How to clean a burnt pot. How to wash burnt food from the bottom of a pot (ceramic, enamel, aluminum, stainless steel), as well as how to clean the pan from the outside

shared

Perhaps one of the most annoying incidents in the kitchen is a burnt pan. The deposit on the bottom is difficult to wash the first time. You have to rub for a long time, risking damaging the coating of the dishes. Normal detergent not suitable for dishes. How to wash the burnt bottom? Let us turn to the experience of housewives.

In order not to have to get rid of soot at the bottom of the pan, do not allow it to appear. It occurs due to the burning of food, improper operation dishes, irregular care, too high temperature cooking. If the soot particles were not washed off in time, then the dishware will burn even more, and it will be more difficult to wash it.

How to clean a burnt bottom of a pot

To get rid of the burnt layer on the bottom of the dish, you can resort to folk remedies, and you can use modern household chemicals. But it is important to consider the material from which the pan is made. It can be enamelled, aluminum, of stainless steel, cast iron. In the care of each type of coating has its own nuances. For example, an enamel pan cannot be cleaned with acids, and salt, ammonia and chlorine are contraindicated for stainless steel cookware. A hard metal sponge for cleaning is used only in the care of cast iron products, it scratches other materials. Aluminum is sensitive to abrasive particles. Therefore, if you want to clean the carbon deposits from the bottom by attacking the dishes with household chemicals It is better to use liquid detergents. Also, aluminum can darken from soda. Do not use abrasives in the care of pots with a Teflon coating - the non-stick layer will suffer, the item will be damaged.

Folk ways to clean pots from soot

More often, we habitually soak the soot in the pan for several hours, and then rub it off with sponges and brushes for a long time. But there is also an alternative. Here are various folk recipes getting rid of soot.

Glue will help to cope with stubborn burning in the pan

Prepare a solution of 1 tbsp. l glue, one third of a piece of laundry soap and four liters of hot water. Pour into a saucepan and boil for half an hour. Rinse afterwards. The method is not suitable for aluminum cookware.

Lemon acid. 50 gr. pour citric acid into the affected dishes and fill with water. Boil for about half an hour and rinse.

Citric acid will help get rid of soot

Soda. Baking soda acts as a mild abrasive. It can be used on its own or in combination with other ingredients. You can try to immediately wipe off fresh soot with soda: apply soda to a dampened sponge and rub it. More complex contaminants are best boiled in a soda solution. It will be enough three tablespoons of soda per glass of water. If you have a large container, then you can immerse the pan in soda solution whole and boil. Then it will become clean even outside. The action of soda will help strengthen the salt. To do this, mix salt with soda one to one and apply to the burnt bottom. Add some water to make a paste. After a day, replace the mixture of soda with salt and boil if the soot does not go away. Do not use salt to clean steel utensils.

Baking soda will replace cleaning agent

Salt. It is worth recalling that salt should not be used for stainless steel dishes. For other materials, this recipe is suitable: cool the pan with cold water, pour salt on the bottom so that it covers the burn, clean it with a sponge after a couple of hours. Salt solution can also be boiled for greater effectiveness.

Salt is a natural abrasive

Vinegar. Acetic acid will corrode carbon deposits if left for 2 hours at the bottom of the pan, and then rinsed with dishwashing detergent. The disadvantage of this method is that vinegar can damage the enamel, so this method is not suitable for enamelled ones.

Acetic acid will cope with deposits on the bottom of the pan

Activated carbon. Universal remedy for all types. Prepare a powder from charcoal tablets, which is used to cover burnt places. After half an hour, pour cold water and wait another half hour. Nagar is easily washed off. But note that Activated carbon Helps to deal with fresh dirt. For an old layer of soot, more than effective method.

Activated charcoal will "cure" the burnt bottom of the pan

Unusual folk ways

In addition to the above funds, which can be found in the arsenal of any housewife, there are several unusual ones. However, they can also help in solving the problem of soot.

Sand. We will attribute it to non-standard, since sand in urban conditions is not so easy to find. But our grandmothers used it regularly when washing dishes. Sand, due to its structure, removes burnt and dried-on contaminants and, at the same time, is easily washed off with water. Therefore, if you need to wash the pot on a hike, feel free to use river sand.

Sand has long been used to clean dishes.

Coffee. Another natural abrasive. It is applied for 2-3 hours on a contaminated place, then the carbon deposits are cleaned with a sponge.

Lemons or sour apples. The natural acid of these products is able to remove carbon deposits. To do this, the products are placed in a saucepan and boiled for an hour. Note that this method also suitable for descaling.

Mustard. Dry mustard is poured onto the burnt place and the soot is wiped off with a sponge.

Sparkling water. Coca-Cola contains phosphoric acid, which is capable of corroding scale. Why not apply it against soot? Fill the bottom with a drink and boil.

How to clean a Teflon pan

Teflon coating itself is already protection against soot. However, it does get dirty over time. Before cleaning such products, it is important to remember that the slightest scratch will lead to burning of food. Therefore, cleaning should be gentle: without metal and hard sponges and brushes, without the use of abrasive products. To wash off the dirt, pour a warm soda solution (2-3 tablespoons per glass of water) on the bottom and leave for 40 minutes. After that, clean the surface with a special sponge for Teflon.

Special sponge for Teflon coating gently removes dirt

Household chemicals against soot

Of course, you should not give up modern means for cleaning dishes. There are suitable detergents, the action of which is not limited to cleaning dishes, but there are specializing specifically in burnt food residues in dishes.

Pemolux. An inexpensive cleaning powder that works like baking soda. Apply to dirty areas and wipe off carbon deposits with a damp sponge.

Sanita anti-fat gel. Designed for cleaning kitchen surfaces. Suitable for dishes too. After using it, rinse thoroughly.

Antinakipin. You can also try to remove soot. Some brands include lemon acid, therefore, before buying, you should familiarize yourself with the composition - you should not overpay for beautiful packaging.

Shumanit. A very strong tool. Designed for cleaning plates, removing grease. The composition includes an acid that corrodes fat and soot. Effective but not safe. You can use Shumanite only with gloves, you can not inhale its vapors. The composition is used only for cleaning the outside.

White. Everyone knows the tool. Soak overnight and rinse thoroughly in the morning. Not suitable for aluminum cookware

Will a dishwasher help?

In principle, it is possible to wash carbon deposits in the “dishwasher”, but only if it is fresh pollution. Before washing, clean the pot of food residues and rinse hot water, place upside down in the lower bulky basket. Select the intensive washing mode. When choosing a detergent, pay attention to whether it contains enzymes - they will help remove stubborn particles.

crockery with ceramic coating it is better to wash in the dishwasher. It gently cleans the dirt without harming the delicate coating.

How to clean an enamel pan from soot. Video

There are many ways and means for cleaning carbon deposits, but try to prevent it from appearing. And if the pan is still burnt, do not be lazy - clean it immediately.

Each experienced hostess has her own recipe for how to clean the pan from burnt jam or porridge. Some recipes help to quickly cope with burning, while others require both time and effort. It is important not only to clean the dishes, but also not to damage the enamel. What can be advised?

A simple, but at the same time effective way to wash a pan of burnt jam, or, for example, rice, is boiling. But this method is suitable for metal utensils.

The dishes are filled with water and poured into it 2 tbsp. l. baking soda. Then the dishes should stand and get wet for about an hour. After that, the pan is put on fire and boiled for 15 minutes. After cooling, you can wash your utensils with a washcloth with almost no effort.

The way how to clean an ordinary saucepan from burnt porridge or an enameled saucepan from jam is different. We don't use baking soda here. But simple salt will help to cope with burning, the cleaning qualities of which no one doubts. For 1 liter of warm water we take 7 tbsp. l. salt. Then put the pot with salt on the fire for half an hour. After boiling, the dirt will easily come off. This cleansing with salt is the most gentle for enamel.

Milk serum

If the jam is burnt, then you can remove the fumes with whey. So you can even clean the enamel pan. Serum is collected in a vessel so that all soot is covered with it. Then the utensils are left to soak for a day. After such a soak, you can easily wash the enamel pan from burnt jam.

lemon acid

From burnt porridge or burnt jam, you can wash utensils with citric acid. First, prepare a solution at the rate of 1 tsp. acid per liter of water. Then the solution is poured into the affected container and placed on the stove. When the water warms up, you need to add a few more spoons. table salt. You need to boil for about half an hour - all the dirt will go away well.

apple peel

Apple peels contain acids that work in exactly the same way as lemon acid. First, rub the burnt skin with a peel, and then leave for 15 minutes. Take water in a saucepan, throw in the peel and boil for 20 minutes. All fumes must go.

Activated carbon

If the saucepan is very dirty, then you will need a couple of packs of coal. The tablets are crushed and sprinkled with cinders, left for 30 minutes. After that, they collect cold water and leave aside for another half an hour. After that, wash the dirt and rinse the saucepan.

Special Recipe

If the utensils are too burnt, then one special recipe will help. It is necessary to take 50 g of soda, 50 g of lemon acid and 100 ml of "Whiteness". The components are diluted in 300 ml of water and poured into burnt utensils. Now you need to boil the solution for 30 minutes and set aside until it cools down. This recipe will help clean even burnt enamel well.

Freezer

Burnt sugar can be easily removed even without the use of chemicals or improvised means. Just put the dishes in the freezer and leave for at least an hour. After that, wash the utensils in cold water. After the freezer, all the dirt will easily go away. Not worth taking hot water after frost, as the enamel may crack.

Laundry soap

This method is great if the burnt layer is not too dense. Pour very hot water into a burnt container and add liquid soap, household shavings. soap or dish detergent. Make a soap solution by stirring the soap, and then boil for 20 minutes. When the saucepan has cooled, it can be easily cleaned with a sponge.

Vinegar

Ordinary vinegar is able to clean soot well. The affected areas are abundantly watered with vinegar and left for a couple of hours. During this time, the vinegar will break down all the dirt, and it will be possible to wash everything almost effortlessly. But keep in mind that this method is completely unsuitable for aluminum.

If you can't find vinegar, you can replace it with lemon juice. It is cut and rubbed on the affected areas, and after 3 hours the container is washed. If it is not possible to wash the dirt immediately, then the procedure can be repeated.

Coffee

Do not rush to throw away the used ground coffee, it will come in handy for cleaning. Lubricate the affected areas well with thick and leave aside for about 20 minutes. Then rub the container with the product.
There are a lot of ways to clean the dishes after jam or porridge without the hassle. Choose the tool that you have at hand, and start washing the burnt utensils.

It is convenient to cook in enameled dishes, but food burns easily in it, enamel is damaged. How to remove soot from a burnt enamel pan Literally in 15 minutes, the cheat sheet, as always, will tell you. Even the old stubborn dirt will go away effortlessly!

How to clean an enamel pan from soot

In no case should you leave washing a badly burnt saucepan “for later”. Fresh soot is much easier to clean.

Fast and easy way wash the enameled pan (and other utensils) from soot and fat: We need a saucepan bigger size than the one you want to clean, silicate glue and baking soda. Pour into large saucepan water, put on fire. Pour half a pack of soda and a tube of silicate glue into the water (ordinary pva will not work, only silicate).

Stir and bring to a boil. It turns out a mixture similar to a paste. We lower the pan there and cook for 15 minutes. Then we take it out and rinse it under running cold water, running a sponge over the surface without much pressure.

Thus, in the solution, you can boil all the available utensils in the house: plates and bowls, forks, spoons, pans, dirty mugs and even a cezve. Five minutes will be enough for the plates. It is especially important to wash all the dishes after turning off the water in summer period when there is no way to wash the dishes perfectly clean.

How to clean a badly burnt pan: the charcoal method

Ceiling activated carbon and pour into a saucepan in the amount of 10 pieces (1 pack) Activated carbon powder should be kept on a burn for 15-20 minutes, and then warm water so as to hide the contaminated surface. Leave for another 15-20 minutes and after a while rinse with any detergent. Nagar from your favorite enameled saucepan will disappear.

Vinegar method: Pour vinegar over the burnt place for 2 hours. If there is no vinegar, use citric acid or lemon. In order for the lemon to give as much juice as possible, you must first scald it with boiling water.

Or, pour clean water and table vinegar into the pan. Heat up over medium heat. After a few minutes, the soot will begin to lag behind the walls. Already better, but the soot still remains. It can be wiped off with a sponge and dishwashing detergent.

Salt method: Pour water into a saucepan and add 3-4 tablespoons of ordinary salt and put on the stove, stirring from time to time. After 2-3 minutes, the salt will dissolve. After boiling, pour the salt water into the sink. Everything is a clean bowl.

White way: It will take 1 tbsp. l. whiteness. Pour cold water into a saucepan, add 1 tbsp. l. Whiteness and leave for a day. Then pour out the liquid and set it to boil water twice, draining each time. Boil water twice in a saucepan, rinse well with water to get rid of chemical residue.

By the way, enamelware, glass vases and water jugs are easily cleaned of limescale if you hold a solution of salt, vinegar and water in them.

What to do if the enamel pan is burnt?

Situation: An enameled pan is badly burnt, and a black coating remains on the bottom. Everything that was possible was wiped off. However, traitorous black spots are still visible at the bottom of the enameled pan. It is necessary to pour water, pour 1-2 tablespoons of citric acid there and put on fire. After a few minutes, you will see how black lumps of burning are peeling off the enamel coating and floating on the water. It remains to hold a sponge and rub the pan with abrasive powder to perfect condition. The simplest and the right way wipe the pots almost without difficulty.

How did the enamel harden? Pour water into a new pot, just brought from the store, and put on fire so that the water boils. Then remove from heat and let the water cool. Water does not need to be poured out. Thus, the enamel will harden.

Attention, danger - temperature difference! You can not put an empty enamel pan on a hot surface, as well as a hot enamel pan on a cold and wet stand.

When the dishes are on the stove and it is hot, you can not pour cold water, otherwise the enamel will crack. It is also useful to know that enamel is easily damaged by temperature changes and mechanical shocks, and loses its non-stick properties.

Advice on how to prevent the smell of burning if the pan is burnt:

Burnt food leaves behind a terrible smell for a long time: it spreads throughout the apartment, is absorbed into clothes and furniture. To keep households safe unpleasant consequences, cover the burnt saucepan with a damp kitchen towel. So the smell will not come out.

And finally, the main tip: After all the manipulations to clean the enamel pan from soot, rinse it thoroughly with warm water. Better yet, boil water in it twice to eliminate the danger of poisoning. chemicals. It is safest to use products with salt, vinegar, soda.

Tags: the enameled pan is badly burnt, the bottom of the enameled pan is burnt, how to clean the pans from soot, the pan is burnt.

admin

Often the dishes lose their radiance and beauty due to long-term use. And it happens that cleaning is required due to inattention - the pan burns and the bottom becomes covered with burning. It is not cleaned by simple methods. Usually, in order to clean the pan, you need to soak the bottom in a solution of soap, and then try to scrub the burnt with a brush. It happens that a similar method works, but what to do if the usual methods of struggle do not save?

Before you start cleaning, it is important to understand what metal the pan is made of. All materials react differently to solutions. home cooking. For example, salt can damage stainless steel, while acids can damage enameled cookware. If it is still burnt, then home methods will help save the pan.

Glue and laundry soap

A similar method with glue and laundry soap suitable for any type of pots.

To wash old dishes with old stains, a large layer of soot and fat, you will need a recipe of 4 liters of boiling water, 1/3 of grated soap and 1 tablespoon of PVA glue. After that, the mixture must be boiled and the dishes lowered into it for 30 minutes.

A terrible plaque can be easily cleaned off.

Glue and soda

Enough simple method cleaning enameled dishes and any other from a layer of soot and fat is silicate glue in combination with soda.

You will need another pan, but a much larger one. Water is poured into it and boiled. ½ pack of soda and 1 tube of silicate glue are also poured here. Simple PVA is not needed here. Stir and let it boil. It turns out a composition resembling a paste.

PVA glue and silicate in combination with various means Great for cleaning carbon deposits from pots.

Lower the pan that needs cleaning here and “cook” for a quarter of an hour. Then take it out and rinse with water. In the same way, you can. Plates last 5 minutes.

Cleaning with activated carbon

This method of cleaning with activated carbon is suitable for enameled, aluminum and stainless steel cookware. In particular, it saves when milk burns.

Prepare several tablets to be crushed into powder. They are covered with a bottom and allowed to stand for half an hour. Then fill the bowl with cold water and leave again for half an hour. After such manipulations, the pan is easily washed.

Pot cleaning soda

This method is suitable for pots with enamel and stainless steel. It is better not to use it on aluminum, because. it gets dark.

Baking soda is a great way to clean pots inside and out. If the dirt is not too old, then simply rub it with a brush with the addition of soda. If the layer is impressive, then boil the dishes in water with the addition of 1 tbsp. soda. Another version of the recipe involves the use of soda ash. And for excessive dirt, add a couple of spoons of 9% vinegar and ½ part of laundry soap to the composition.

Salt cleansing

The salt cleaning method is suitable for pots with enamel and aluminum. This method is prohibited for stainless steel, as the metal darkens from salt and corrosion can begin.

A layer of burning is poured with a concentrated salt solution and boiled for an hour. If you want to remove the layer outside and inside, then boil the dishes in another larger container.

Serum cleansing

Perhaps cleaning with whey will seem strange. But this simple product helps get rid of burns on stainless steel, aluminum and enameled pans.

Baking soda, salt, vinegar, and whey are great cleaning products to have around the house.

Pour whey into the dishes at a level a couple of centimeters higher than the burnt place. Let stand for a day. After that, drain the liquid and rinse the dishes. Due to the presence of various acids in the composition of the whey, most of the burnt particles move away from the surface.

Vinegar cleaning

The vinegar cleaning method works on aluminum and stainless steel pots, but not on enamel.

Vinegar easily gets rid of burning. Before you start cleaning, fill the dishes with 9% vinegar and let stand for three hours. After that, wash in the usual way. Alternatively, bring water to a boil with 1/2 cup vinegar and 1/2 laundry soap for an hour or 30 minutes.

Cleansing with citric acid

Among other things, pots are cleaned with citric acid, which not only removes soot, but also lime scale. This option suitable for stainless steel and aluminum, but not for enameled pans.

To clean the pot, boil water in it (not too much, just to cover the soot). Pour a couple of tablespoons of acid here and let it boil for a quarter of an hour. After that, the bottom is easy to clean.

Citric acid is an effective remedy for soot and scale. But it is not suitable for all types of dishes.

There is another way with apples. Some housewives claim that enamelware can be cleaned by boiling the peel of sour apples or rhubarb in it.

Cleaning with salt and soda

To tidy up an aluminum and enamel pan, use the salt and soda cleaning method. These substances are mixed in equal parts. The burnt areas are sprinkled with the composition, heated water is poured to create a slurry. The pan is covered and left for a day.

After that, change the mixture and add water to cover the burn. Send the dishes to the oven and bring to a boil. Leave to boil for 30 minutes. After cooling, wash with a simple method.

If the dishes are made of stainless steel, then this method is used carefully. There is a possibility of formation dark spots. It is better to replace the soda-salt mixture with vinegar and water.

Ready-to-use pot cleaners

There are plenty of pot cleaners out there. different materials: enameled, aluminum, stainless steel. The range on the market offers variety of options: from cheap to expensive, from not very effective to the most effective, from gel-like to powders.

In order to wash the soot on the pan with the product, you need to grease the dishes with it inside and out and leave it for the time specified in the instructions. After that, simply wipe with a washcloth.

If you do not have time to prepare solutions, then purchase ready-made products in reserve. Their range is truly wide.

High-quality products do an excellent job even with a difficult case of pollution. But it is required to work in rubber gloves, because. there is a risk of burns if liquid gets on your hands. In addition, some cleaners have a strong aroma, so the treatment is carried out in a ventilated area.

Effectively cleans pans whiteness. You need 1 tablespoon for a medium-sized dish. After that, the solution is boiled for half an hour, and the pan is cleaned in the usual way, then boiled again, but with clean water. This is required to eliminate the smell of the product.

January 3, 2014, 12:00

Every hostess takes care of her kitchen tools. However, it is not always possible to avoid unpleasant situations.

One of the common problems is the burning of enameled pans.

You should not run to the store for a new pan if this still happened. Nagar can be removed with the means that are in every home.

The modern woman has a large supply of detergents. They differ in composition and, accordingly, in action.

Dishwashing liquid: a quick way to clean burns

First of all, you need to use the dishwashing detergent that you use daily at home. For example, Fairy (Fairy).

With it, you can remove stubborn fat and soot. Used for soaking.

For achievement good result you need to follow the following pattern:

1. Fill a heated pot with hot water. Add a few drops of Fairy.
2. Leave at least 1-2 hours.
3. After the time has elapsed, drain the water and rub gently with a sponge.

Some stains are not easy to remove. Then, after soaking, you need to fill the pan again with water and add detergent. Put on the stove and boil. Then rub again with a sponge.

Or use alternative way. Pour abundantly on Fairy's soot and leave overnight. But it is worth considering that the product must completely cover the stains, otherwise the soot will dry out in the air. Then there will be no effect.

Scouring powders will remove burnt fat

Pemolux and Komet cleaning powders are designed to quickly deal with more severe soot. They are used in separate areas with pollution that could not be removed by soaking. Any of the means is suitable.

Action algorithm:

1. Wash the pot.
2. Sprinkle cleaning powder on stains.
3. Rub the soot with the hard side of the sponge. metal sponge not suitable, as it may damage the coating.
4. Rinse the pot thoroughly.

Oven cleaners

Used in advanced cases. There are inopportune moments when the pan can get very burnt, in this case it is worth using products such as Shumanit, Cillit (Silit), etc. It is worth considering that these products are quite aggressive not only in relation to burnt dishes, but also to the skin.

They are quite toxic. Therefore, it is necessary to use gloves and thoroughly wash the pan and sink from the remnants of the product.

The method of application depends on specific means and described on the package.

Improvised means in the fight against soot on an enamel pan

During cooking, the contents in the pan may burn at any time. But what if there is no suitable household chemicals nearby? In this case, you can use various improvised means. They are not as aggressive and therefore safer. However, they are not effective in all cases. strong soot. Therefore, you need to know what and in what cases to use.

Popular remedies to help remove carbon deposits at home

Nagar worries far from one generation of women, so a list of popular remedies has been formed.

Salt

There are two ways to remove carbon deposits with salt. They are not inferior to each other in terms of efficiency, so you can choose according to convenience.

First option:

1. Sprinkle the stains with salt. The soot must be completely covered.
2. Leave for 3-4 hours.
3. After the time has elapsed, rub with a damp sponge.
4. Wash away.

Second option:

1. Mix liter pure water and 10 tablespoons of salt.
2. Pour the brine into the saucepan.
3. Boil for an hour. During this time, the soot will go away, and it will be easy to remove it with a sponge.

Activated carbon

As experience shows, activated carbon is a multifunctional agent used in many areas.

To remove carbon deposits, you need one pack of tablets and a little patience.

1. Crush 10 charcoal tablets. The powder should be homogeneous and without lumps. If a large surface is contaminated, you will need large quantity tablets.
2. Cover with soot powder.
3. Leave for 20 minutes.
4. After the time has elapsed, add water. The amount depends on the degree of contamination. All spots must be under water.
5. Put the pot on the fire and boil for 30 minutes.
6. Drain the water and rinse the pot thoroughly.

Lemon acid

It is worth considering that it is citric acid that is needed. Fruit juice may not give the desired result.

1. Pour a sachet of citric acid into a glass of water (200-250 ml). This amount is enough for a small saucepan. For a larger container, you need 2-3 times more solution.
2. Pour the solution into a bowl. The whole bottom must be under water.
3. Pour out the solution. Remove soot with a sponge.
4. Rinse thoroughly.

Vinegar

Vinegar, like citric acid, is considered one of the most effective means in the fight against soot. However, there is one drawback - an unpleasant smell.

First way:

1. Mix water and vinegar in a 1:1 ratio.
2. Pour the solution into a bowl. The bottom must be completely hidden under the liquid.
3. Boil on low heat for an hour. Be sure to install windows for ventilation so that the smell does not spread throughout the apartment. You also need to cover the pan with a wet cloth and moisten periodically.
4. Rinse the pan thoroughly with a sponge.

Second way:

1. Pour vinegar into a saucepan.
2. Leave for 2-3 hours.
3. After the time has elapsed, pour out, remove the remnants of soot and rinse thoroughly.

Soda

It is considered one of the most gentle cleansers. But you need to apply correctly because of the abrasive. If you follow the scheme, there will be no problems.

First way:

1. Pour a liter of water into the pan and add half a glass of soda. Mix.
2. Boil over low heat for an hour.
3. After the time has elapsed, turn off and leave for a couple of hours.
4. Rinse the pot well.

Second way:

1. Apply a little baking soda to a damp sponge.
2. Gently rub the stains. Try not to hit the sides of the pot.
3. Rinse with water.

There is also a third method, which is in demand, if necessary, to clean not only the inner walls, but also the outer ones.

1. Prepare a large container.
2. Pour six liters of water and pour a pack of soda.
3. Place saucepan. It must be completely submerged in water.
4. Put on fire and bring to a boil. Turn off the fire.
5. Leave for 3-5 hours.
6. Rinse thoroughly.

Soda-salt mixture

Soda and salt in the complex help to cope even with old and strong soot.

1. Fill the bottom of the pot with hot water.
2. Add two tablespoons of rock salt and two tablespoons of baking soda. Mix.
3. Leave for 24 hours.
4. After the time has elapsed, boil for 30 minutes over low heat.
5. Rinse thoroughly.

Coca Cola

1. Fill the bottom of the pot with Coca-Cola.
2. Leave for 24 hours.
3. After the time has elapsed, boil if the soot does not come off completely.

Laundry soap and PVA glue

This mixture helps to cope with multi-layer soot and fat. Even black plaque comes off easily.

1. Grate 1/3 bar of laundry soap.
2. Pour four liters of water into the pan, add grated soap and two tablespoons of glue. Mix.
3. Boil 30 minutes.
4. Rinse thoroughly.

Medical alcohol, vodka

Helps to cope with small soot. Also, vodka and alcohol remove dark deposits from the walls of the pan after cleaning from soot by other means.

Moisten a sponge or rag with alcohol / vodka and rub the stains.

This video shows how to quickly and effectively clean enamelware.

Less popular means

Not all methods are equally in demand and popular. However, this does not mean that their effectiveness is much lower.

Cold

You can also remove carbon deposits by exposure to cold. You need to put the pan in the freezer and leave for an hour. Then remove and rinse with cold water. Remove the remaining stains with a sponge.

Kefir, sour milk, curdled milk

Dairy products are not inferior in effectiveness to popular methods. With the application there will be no problems.

1. Fill the saucepan with the dairy product.
2. Leave for an hour.
3. Rinse.

Brine can be used in the same way.

Fruits and vegetables

The peel of vegetables and fruits will help to cope with dark spots. The most commonly used are apples.

1. Peel vegetables and fruits from the skin.
2. Place the trimmings in a bowl.
3. To fill with water.
4. Put on fire and bring to a boil.
5. Reduce heat and cook for another 10-15 minutes.
6. Then remove the pan from the stove, discard the remaining peel.
7. Rinse the bowl with detergent.

Coffee

Fresh coffee grounds help in the fight against soot. It is applied according to the following scheme:

1. Prepare ground coffee. Collect grounds.
2. distribute coffee grounds along the bottom of the pot. Special attention give to stains.
3. Leave for a few hours.
4. Rinse with water and rub gently with a sponge.

What is strictly forbidden to do

It is worth refraining from certain measures and actions. Otherwise, you can only aggravate the condition of the pan.

However, there are not many restrictions.

• use aggressive abrasives;
• rub with a metal sponge;
• try to remove carbon deposits with a knife and other sharp and metal objects.

Preventive measures

The appearance of strong soot can be avoided if you follow the basic rules:

• make sure that the pan does not burn;
• immediately soak and remove small dark spots;
• once every two months, soak the bottom of the pan with a solution of citric acid;
• refuse abrasive and aggressive cleaners that damage the enamel.