Is it possible to clean the pipes in the bathroom at home. How to clean a blockage in the bathroom: various methods and folk remedies The best way to clean bathroom pipes

Every day in the bathroom at least once they are engaged in water procedures. Gradually, various debris accumulates inside the pipelines and you have to think about how to clear the blockage in the bathroom. There are a lot of options due to which the siphon or other water communications are clogged: human and animal hair, pieces of rags, grease, various contamination of the pipe system. Over time, the liquid leaves more and more slowly and a bad smell appears that the sink or bath emits. Something needs to be done about this.

The most serious reason why a sink or bath is clogged is an error during pipe installation. When making repairs, the "craftsmen" are mistaken with the angle of installation of sewer pipes, which, in turn, contributes to the occurrence of traffic jams. Cleaning in this case is possible, but meaningless. Troubleshooting must begin with the dismantling of old pipes and installing them again.

The second more likely option is carelessness and neglect of preventive measures by the owners. Various objects, hair and debris can easily clog the drain. Even with a small blockage, it is recommended to get rid of it so that the situation does not worsen even more. So, how to clear a blockage in the bathroom?

Ways to eliminate blockages

Mechanical Tool #1: Plunger

If the hole near the drain is clogged, then we take an object that most people have - a plunger. Then you should take a rag or cork and close the top hole to drain the water so that there is no air passage. Then we lubricate the rim of the plunger with petroleum jelly, so we will ensure a tighter fit. We put the plunger on the drain, sharply and intensively begin to drive out the pollution. It is quite possible that it will not work the first time.

Mechanical Remedy #2: Hot Water Plunger

If the previous method did not provide proper cleaning, then add hot water to it. We fill a third of the bath with water, pump it into the pipeline with a plunger, and then pull it out sharply. Continue until the drain is completely clear.

Mechanical #3: Rope

Doesn't take a plunger or hot water. What to do? Remove blockage in the bathroom with a cable. With this tool, you can remove serious blockages. But keep in mind that it is possible to break through thin plastic pipes if you are not careful.

Building a rope at home is quite easy. To do this, you need to get a flexible metal wire. Then bend one of its ends in the form of a small hook, and wind the fabric to the second, making a handle.

Stick the fixture inside the pipe to the expected clogged place and push the debris. After removing the main part of the blockage with a cable, pull out the "fishing rod" with the remnants of pollution. At the very end, rinse the container with hot water.

Chemicals

In some cases, it is appropriate to use chemicals if the tub or sink is clogged. The stores sell a large amount of chemicals in the form of a gel, powder, liquid or foam, which can remove all the bad things that are stuck in the pipeline in a few minutes. Organic contaminants are ideal for chemical removal.

Be sure to read the instructions included with the kit before use.
Use personal protective equipment to avoid unwanted consequences.
Buy products that dissolve the hairline.

Folk method number 1: boiling water

Folk methods are no less popular and give good results. But, alas, removing a strong blockage in the sink or bath with the help of them is impossible. If pipes or drains have accumulated a large amount of fat, then this can be corrected with boiling water. Just pour boiling water into the hole until the water begins to flow better.

Folk method number 2: vinegar and soda

Baking soda and vinegar react with each other, so they are able to remove more complex pipe contaminants. At the very beginning, soda is poured into a glass, after which it is sent straight to the drain. Next, pour vinegar into a glass and pour it down the drain and plug it with a cork. Foam will begin to form if the vinegar and soda react. After 15-20 minutes, rinse with hot water to wash off the remaining vinegar and soda.

Folk method number 3: lemon

Folk remedies are beneficial and convenient to use at home, but they do not always give the desired effect. But lemon will help get rid of light pipe contamination. Squeeze the juice from one fruit down the drain and wait an hour or two. As time passes, the sink or tub is rinsed with hot water.

How to clean a siphon?

The siphon needs to be cleaned periodically, but if this is not done on time, problems may appear at the most inopportune moment. It is recommended to flush the siphon regularly to prevent the sink from emitting a bad smell. Now let's move on to cleaning.

Get an unnecessary soft cloth and put a water container under the siphon. Open the fasteners and remove the flask. After all the water has drained out, carefully clean the siphon. Then rinse the device and mount it back. Also, be sure to position the nozzle so that it does not rest on the flask. Do not rush to remove the basin, first open the water. If nothing flows, then the siphon is installed correctly.

Do not shy away from preventive measures. Doing them regularly will save you a lot of time in the future.
To collect any debris, install a metal mesh.
In some cases, it will not be superfluous to use compounds that prevent the appearance of blockages.

Now it became clear how to clear the blockage in the bathroom. After all, anyone agrees that it is pleasant and comfortable to be in a clean bath.

The drain in the bathroom can become clogged at any time, and such a nuisance always inevitably leads to several problems at once.

An unpleasant smell appears, which can be felt not only in one room, but also spread throughout the apartment or house.
The impossibility of draining leads to the fact that it is impossible to wash.
This situation is dangerous for flooding. This can happen if the problem is not identified in time.

Advice: at the first “symptoms” of the appearance of a blockage, you need to respond immediately. This trouble is resolved much easier in the very first stages.

You should not hope that the garbage will quickly and by itself leave the pipe. If the water does not go into the drain hole, then you will have to clean the sewer using special tools and folk methods. What to do if there is a blockage in the bathroom, how to fix it yourself - you can find out about this below.

Why there is a blockage in the bathroom and how to avoid it

It is far from always possible to ensure that small foreign bodies of various origins are not carried into the drain along with water. There may be:

animal hair when washing them;
hair;
sand and crushed shells (when taking a shower immediately after the beach);
drops of fat, etc.

Also, a significant role is played by the wear of pipes, on the inner walls of which a layer of fat and lime deposits grows, as well as rust.
And if in the first case it is still possible to use a special mesh and partially remove debris from the bottom of the bath, preventing it from “going” into the drain, then only preventive measures can minimize the formation of plaque inside.

First way. In the fight against fat deposits, systematic cleaning of communications with a strong pressure of hot water will be effective.

The second way.

Pour half a glass of soda into the drain hole.
Add the same amount of vinegar.
Close the drain tightly with a cork or a regular rag so that foam does not get up (it is formed due to the starting chemical reaction).
Wait 2 hours.
Remove the damper and rinse the pipes with boiled hot water.

Also, the proven “folk” methods for preventing blockages include the use of citric acid - 2.5 full tablespoons of powder should be poured into the drain and poured with a liter of boiling water. "Lemonka" will help dissolve limescale on the pipes and increase their inner diameter for easy passage of drains. These are effective ways to clear a blockage in the bathroom at home using ordinary household products. Below you can find detailed instructions on what to do in each case.

How to clean pipes at home

Plunger - a special tool in the economy, which is used when clogging utilities. If a section of the sewer system is clogged, it is important to remember the basic rules for using this device.

Leave a small amount of water near the drain hole.
Press the plunger firmly against the surface of the bathtub at the drain point. You need to make sure that air does not get under the rubber bowl.
Perform several vigorous up and down movements with a wooden handle, and then jerk the tool away.
If the result is not obvious, and the water does not go away, the procedure is repeated.
When everything works out, open the tap with hot water and rinse the pipes with it.

The plunger should be used regularly for preventive purposes. The often repeated process of pushing the small clumps of dirt that are already inside will prevent them from accumulating into bulkier masses.

Carefully: the instruction manual for acrylic bathtubs does not allow the use of this improvised tool, as the tightness of the drain may be broken.

Another mechanical device that allows you to remove accumulated debris from the pipe is a plumbing cable.

To successfully eliminate the blockage, it is necessary to insert the cord into the drain hole and begin to move it forward until it comes into contact with the problem area of \u200b\u200bthe sewer.
The purpose of further actions is the destruction of the “cork” or its “hooking” and extraction to the surface. To do this, you need to break through an obstacle, making reciprocating movements with a cable and simultaneously rotating it around its axis (such a combination of techniques is possible using a special handle).
At the same time, hot water poured into the hole will speed up the process of removing the blockage.
If, according to the sensations, the movements of the cable inside become freer, you need to slowly remove the cable from the pipe and check whether it was possible to do what was intended: whether the water is now draining.

Important: when purchasing a fixture, it is necessary to take into account the diameter of its cross section. The thickness of the flexible cables offered on the market today varies from 6 to 28 mm. Ropes that are too thin are not effective for removing large blockages, while thicker and, accordingly, massive ones can damage small pipes.

How to get rid of clogged hair

To clean the sewer from hair that has fallen into it, you can use both a plunger and a cable. But given that these methods require time and the use of physical force, it is sometimes more convenient to turn to chemical agents like Mole powder.

The active components of such mixtures easily dissolve hair, wool and other small debris. To use them in the standard case, you need to pour or pour a portion of the chemistry into the drain hole. After a while, prescribed in the instructions, rinse the pipes with plenty of cold or hot water (depending on the selected reagent).

Advice: the main condition for the safe use of such components is to protect your hands from getting a chemical agent on them. Wear gloves.

If the blockage is at a shallow depth, you can use a mini-cable in the form of a wire with a hook at the end. Lowering it into the drain, they pick up and take out a significant amount of hair stuck there to the surface.

In addition to the described mechanical and chemical methods for eliminating this type of blockage, sometimes resort to "folk". You can use a regular strip of tape about half a meter long. The sticky tape is lowered into the drain, and some of the debris is stuck to it, and then removed. So you can act until the complete removal of the “cork”. After that, the pipe is washed with water.

The best pipe cleaner

The choice of the best means to eliminate internal contamination of pipes is ambiguous. Often, each housewife singles out for herself one or more of the most effective methods and stocks up her own home arsenal.

Factors that influence the choice of pipe cleaning procedure:

availability of free time and the right tool;
the urgency of solving the problem;
the degree of “neglect” of the situation;
personal biases (for example, some people fear the consequences of self-cleaning with chemicals).

In each case, it is reasonable to use one or another tool. When using “chemistry”, it is important to carefully read the labels for the products, as some of them can damage the material of the sewer pipes - for example, deform plastic or “corrode” cast iron. You should also strictly adhere to the time of action of these substances, do not forget to wash them off exactly when required according to the instructions.

You should not get too carried away with folk methods without trying their action gradually. For example, an effective tool that cleans pipes from blockages is perhydrol - a concentrated solution of hydrogen peroxide. But when interacting with the "organics" of pollution, such a substance gives a strong reaction. Therefore, it must be poured very carefully, in small portions (starting with half a glass), maintaining intervals. If too much foam is formed, it can be neutralized with water.

If your own attempts to solve the problem were unsuccessful, entrust this issue to professionals. Contacting a specialized service will be the most effective means of eliminating any plug inside the pipe.

How to clean a drain in a bathroom sink

The most common problem, if the outflow of water in the sink is slow, is the clogging of the siphon under it. The pipe in this place is bent in such a way that any debris is easily trapped there, and the drain can become clogged.

There are no restrictions on the choice of method to overcome the problem. You can use chemical solvents, or try to push the plug with a plunger.

If it was not possible to clean the pipes in this way, the best solution would be to disassemble the siphon itself and remove the dirt with your own hands. Moreover, under the sink it is quite convenient to do it.

Advice: before cleaning pipes, stock up on a bucket or basin. This will prevent the spread of dirt on the surfaces in the bathroom.

We substitute dishes for flowing dirt directly under the sink.
We separate the siphon from the pipe. Drain the water into a bucket or basin.
From the inside, we carefully clean communications from dirt, remove hair, food debris and other waste.
We process the internal surfaces with a degreasing agent and rinse with hot water.
Install the siphon. Turn on the water and check if the problem is fixed.

Such an unpleasant phenomenon as clogged pipes can be quickly eliminated. To do this, it is not always necessary to manually disassemble the siphons or wait for the arrival of a professional plumber with special equipment. Most often, having basic knowledge and basic tools will help you solve the problem yourself and make the water flow freely when you need it. We hope our video tips will help you overcome these problems.

Very often, housewives have the question “How to clean the drain hole in the bathroom from hair?”. Often the drain is clogged with hair. For such a problem, there are 2 solutions: figure out for yourself why water does not go into the drain hole, or call a plumber.

How to clean a drain hole

There are a lot of reasons why there may be a blockage in the drain hole. It can become clogged not only with hair, but also with small rubbish, pellets from clothes, and the hair of four-legged pets.
When all this accumulates in the drain, a lump forms, which is the reason that the water does not leave. Moreover, this lump becomes more and more, a bad smell begins to appear.
Well, let's get started. In order to clean the drain hole, you should try the following methods:

try clearing the blockage under the cap covering the drain hole. Even if it seems to you that the cap is clean, check it anyway. It is very likely that you will find hair in huge quantities there. Drains with a Phillips plug are the most prone to these blockages. If you have a bathroom with a plug, you will need to lift the plug before cleaning. The guide plate is unscrewed, and only then can you remove the plug.

If the blockage from the hair is deeper than you expected, then you can use:

wire hook.
Take the wire hangers, unwind and bend into a hook. Place a hook in the drain hole and pull out the blockage. Important: you need to pull out, and not shove rubbish. Otherwise, you will definitely have to call a plumber.
plunger.
Probably the most common method. But it will only help if the blockage is small.
The plunger should be the size of a drain hole. It is easy to clean the drain hole with a plunger, so if your drain is often clogged, it will become your indispensable assistant. How to punch a drain hole with a plunger? Make about 10 sharp reciprocating movements. If the water is still standing, add hot water. Fill the tub with enough water to cover half of the plunger. The subsequent actions are the same as described above: we are trying to “break through” the blockage.
cable. A cable can help with serious sewer blockages. A cable is a twisted wire, at the end of which there is a handle (it can be wooden or plastic)
The advantage of this device is that it can cope with blockage, which is located at a depth of up to 9 meters.
How to use the rope? Take the handle and insert the cable into the drain, hold and twist the cable with one hand, push it deeper into the drain with the other. that the cable is stuck in something, “stalled” - know that this is the place of the blockage. Now you need to repeat the back and forth movements several times and then you can clean the drain hole. You can then pull out the cable.
tape. To punch a drain hole, you can use any adhesive tape. Cut a strip of approximately 50 cm. Place the tape in the drain hole and move along the inner walls. Almost all the hair will remain on the adhesive tape. When you remove the sticky tape with hair, do not forget to wash off the remaining blockage.
chemical preparations. In the fight against blockages, you can use household chemicals. Ask the store clerk to suggest which remedy is best.

before using chemicals to clean the drain hole, read the instructions and the composition of the drug. Why? Some preparations are not suitable for all types of pipes. So, "Mole", which is considered a very effective tool, you can not clean blockages in plastic pipes.
Using household chemicals to deal with blockages, you need to strictly follow the instructions, otherwise there will be no sense. The drug must be poured or poured into the drain hole and left for a certain period of time (indicated on the package). Then you just need to rinse the product with water.

If you do not follow the rules of use, there is a risk of deformation of the pipes, or inefficiency in the use of the product. Remember to wear gloves when you clean the drain. Safety is above all.

Top Drain Cleaning Products

How to clean the siphon in the bathroom.

Sometimes the problem lies not in the drain hole, but deeper - in the siphon. How to clean the siphon yourself?

there should be a rag on the floor under the siphon
under the siphon we put a small basin.
Perhaps one rag will not be enough, and since the water in the clogged siphon is rather dirty, it is better to substitute a basin so that you do not wash the entire bathroom later and do not get dirty yourself.
then carefully unscrew the lock nut
the flask is removed
after you remove the flask, the water will flow into the basin..
then remove the siphon and rinse it under running water. The pressure of water will help you get rid of small particles of blockage, wool, hairs that remain on the walls of the siphon.
screw everything back. IMPORTANT: the branch pipe, which is responsible for the drain, should not rest against the flask.
after the siphon is in place, you need to check if the connection is tight and if the siphon is leaking.

What to do so that the drain hole does not clog

After reading the article, you probably realized that cleaning the drain hole and siphon is not so difficult. But in order not to waste time on the cleaning procedure regularly, you need to follow certain rules, it is important to prevent clogging of the drain hole.

install a mesh in the drain hole that will trap litter
clean the drain hole from time to time with household chemicals.
clean the siphon every three months

If you follow these simple rules, you will never again need to search the Internet for “how to clean the drain hole in the bathroom from hair”!

Video on how to clear blockage

Bathroom clogs are one of the biggest problems in any home. And not only in the apartment, in our age of modernization for convenience, it has become common to install bathrooms in private houses and cottages. If the sewage system has ceased to function normally, all kinds of problems immediately begin - this is the appearance of an unpleasant odor, and overflowing from the drain of dirty water. Even if all the rules of operation are observed, clogging still cannot be avoided. The article will discuss what to do if there is a blockage in the bathroom.

The bathroom sewer system begins to clog from the very moment it is used. From the first days of operation, organic and inorganic deposits settle on it. Therefore, the causes of clogged pipes in the bathroom are varied.

Most often, it is caused by accumulations of hair, pet hair, soap solutions and deposits of household chemicals, which over time are pressed and compacted. All this begins to rot, mold and a fungus may appear. Such blockages are simple and medium types in their complexity. Difficult types, the so-called blind blockages, include draining water after construction work.
They are also divided into local - this is when the blockage occurred in only one apartment, and general - when the central sewage system was blocked.

What causes blockage in the sewer

First, let's figure out what all the same is a sewer drain system.

Typically, sewerage originates from the kitchen and passes into the common riser through the bathroom and toilet.

In modern construction, plastic counterparts have replaced the old cast-iron pipes. They have a number of advantages:
1. less susceptible to pollution;
2. due to the properties of the material, there is no condensate on such a pipe;
3. plastic pipes do not rust or rot.
The clogging of sewer cast iron pipes, first of all, does not depend on their predisposition to rust, but on the location. They are mounted at a slight slope in relation to the junction of the riser.
The sewer system on each floor has an auxiliary window designed for additional cleaning, as a rule, it is located 15 cm above the level of the bath or sink.

Tip: for prevention purposes, so as not to resort to time-consuming cleaning of the blockage in the bath, it is recommended to spill the sewer pipes in the bathroom with boiling water with the addition of soda or bleach. To prevent blockage, it is recommended to do this once every seven days.

Tip: there is another way using soda ash. One cup of soda is poured into the drain hole, followed by a cup of vinegar. At the moment when the reaction starts, rinse the drain with boiling water.

Tip: as a prevention of blockages, it is quite effective to use an elementary filter plug, which prevents hair and any debris from entering the sewer system.

How to clear a blockage in the bathroom

Siphon analysis

Before using chemicals and other cleaning products, you can try to disassemble the siphon. In this case, the likelihood of quickly eliminating the blockage increases and it becomes possible to clean the siphon itself from the resulting sediment (it does not harm the drain system, but it is from it that an unpleasant odor comes from the bathroom and bacteria are bred in it).

When disassembling, you need to take into account that it is easier to dismantle a plastic siphon than a metal one, since the metal corrodes and the parts are firmly connected to each other. Therefore, in an old house where a metal drain system is installed, it cannot cope without the help of a plumbing specialist.

For work you will need:

rag;
basin;
technical gloves.

Stages of work

It is necessary that the bath was without water, so if it is clogged and the water is standing, it must be scooped out.
Before removing the tightening nut and flask, it is necessary to substitute a basin or bucket.

After the inspection, the sewer pipe is cleaned mechanically. To do this, it is enough to rinse the drain with boiling water.

Tip: in the bathroom, dirt usually accumulates at the base of the drain, so it will not be difficult to clean it by simply removing the protective grill.

Using hot water

The first step is to determine the type of blockage, that is, to check where the pollution has occurred - local or the central pipe is clogged.

You need to pour boiling water into the bathroom drain, you can with soda. Such a method should help, especially with the accumulation of soap or chemical deposits.
This procedure should be done carefully so as not to scald with boiling water.

Plunger application

The most common and simple device for cleaning sewer systems is a plunger.

The rubber cup of the plunger should be larger than the drain hole and fit snugly against the drain in the bathroom to create a vacuum.
Holding the handle of the plunger, several sharp pushes are made in order to break through the blockage in the drain pipe. After that, the plunger must be sharply torn off from the bath.
If the first cleaning did not bring the expected results, then the same procedure is repeated several more times.

Cleaning with chemicals

Today on the shelves of stores there is a very diverse selection of chemicals for cleaning blockages. Of course, with their help there will be an immediate result, but do not forget that such chemistry contains acids and alkalis and must be used with extreme caution.

Tip: if the common sewer system is completely clogged, then you should not clean it with chemicals, as a caustic substance can go back into the bathroom and damage the enamel. Also, with frequent use, the sewer pipes themselves can quickly fail.

There are some rules when using chemicals:

Vapors of chemicals are very harmful to health and therefore cleaning should be carried out in a well-ventilated area in a protective mask and rubber gloves;
it is recommended to use drugs made only by industrial means. Homemade cleaners such as acid concentrate or kerosene can render the sewer system unusable;
in no case should you use several funds at once, this can lead to a reverse effect. There is a risk of a reaction, in rare cases with consequences;
when using chemical compositions, it is necessary to strictly follow the attached instructions:
1. in the required amount, the agent is poured into the drain;
2. waiting for the specified time;
3. the drain is flushed with water.

The use of a plumbing cable

Also, for cleaning drain systems, a steel cable is widely used, which has a diameter of 4 mm, one end of which is equipped with a handle to simplify work, and the other has a brush or brush with hard bristles. It is not difficult to buy it, as it is sold in any hardware store. When buying a steel cable, you need to consider its length.

Tip: in the practice of specialists, the use of an electric spiral cable is common, but it will not work on your own.

Stages of work

When using a cable, you need direct access to the sewer pipe itself; for this, the drain hose or siphon is disassembled and removed.
The cable is slowly introduced into the sewer hole, at the same time rotational movements are made clockwise. Rotations should be slow to avoid bending the cable.
If possible, during cleaning with a cable, water should be poured in at the same time to facilitate work and soften the seals in the pipe. The advance of the cable continues until it hits a blockage.
After a blockage in the pipe is found, it is broken using the same rotations of the cable. This method takes much longer than the others.

Cleaning pipes with a vacuum cleaner

At home, you can use an ordinary household vacuum cleaner, which has a blowing hole, to clean the drain.

But before using the vacuum cleaner, you need to prepare it:

for work you need a small rubber ball;
it is cut into two parts, which should be one larger and the other smaller;
a small part of the ball is placed inside the large one and a hole is made in the center equal to the diameter of the vacuum cleaner tube;
the hose of the vacuum cleaner is fixed in the hole in the ball and fixed with electrical tape or a clamp. But before attaching the hose to the blowing hole of the vacuum cleaner, you need to remove the bag from the dust collector;
the resulting bowl is attached to the drain and the vacuum cleaner is turned on.

This simple and primitive method removes blockages very well.

Hydrodynamic method

It happens that the blockage cannot be removed by any of the above methods. Then more efficient equipment should be used.

Hydrodynamic removal of blockage is carried out using a high-pressure water jet. Thus, all deposits that have accumulated over the years are washed out very thoroughly.
It is used mainly for flushing pipes in hard-to-reach places, since it does not violate the tightness at the joints.

thermal method

Cleaning the blockage in the bathroom with a jet of hot water under pressure is called the thermal method.

This method is great for dealing with hard fat plugs.
If, in combination with hot water, chemicals are also used that destroy organic deposits and bacteria, then in this case disinfection is also carried out.

Preventive measures against blockages

In order to avoid the question of how to eliminate the blockage in the bathroom, it is necessary to periodically carry out preventive maintenance of sewer pipes, which allows you to keep the drain system clean.

To prevent the deposition of fat, twice a week, for 10 minutes, flush the sewer system with boiling water;
install protective gratings that protect pipes from various kinds of debris and dirt getting into them;
do not leave rags and all kinds of waste near the drain, getting into the sewer system, it is they who form an impenetrable plug in the pipe;

Only with proper care and compliance with the rules for operating the bathroom, it is possible to extend the life of the drain system. After all, with frequent use of cleaning products, the sewer system is subject to rapid wear.

“does not want” to go through the pipes, is familiar to many, so it is important to know how to clean the blockage in bathroom. In this case, there are several options: chemicals or improvised. They have different efficiency and safety of use. The key in the fight against blockages is systematic, because the slow outflow of water does not happen just like that, you do not need to wait until the pipes are completely clogged.

Why does clogging occur?

Before you start the fight, you need to know the enemy in person, which means to figure out what are the causes of blockages. The first, and perhaps most important, is human life. It is not always possible to control what and in what volumes gets into, and hence into the pipes. The most difficult in terms of clogging are:

The hair, the longer, the more reliably the pipe is clogged.
Animal fur.
Pieces of rags (rags).
Paper, napkins.
Items that should not be in the pipes.

Blockages are different, and vary in the degree of passage of water. If it does not leave at all, then this is a complete blockage, this occurs if a cork of loose debris has formed in the pipes, the same hair, wool, paper. If the water leaves, but more slowly than usual, then this is an incomplete blockage. And this is even worse, because over time, an unpleasant smell will also be added to the difficulties with the outflow of water, because what is stuck in a “favorable” environment with high humidity will begin to rot and exude a smell.

incorrect operation. Do not wash pets in the bathroom, carpets;
wrong pipe system installation. If there is insufficient slope or sagging pipes, blockages will be common.