Making flowerbeds from tires. How to make a flower bed out of tires with your own hands (photo and video). Garden flowerpot from an old wheel

There are few summer residents who are only interested in material interest - a house, outbuildings, crops. Most love and appreciate the beauty in their land, which does not promise commercial benefits. But the number of rich people who are able to pay for expensive materials and the work of professional gardeners for the sake of a spectacular open sky, is also not calculated in gigantic numbers. Hence a simple conclusion: you can make excellent ones at the dacha from waste, in fact, material, such as the old wheel tires doing all the work with his own hands.

Old tires - new design

Walk through the city courtyards and appreciate their design. Car tires have long been an almost indispensable component. modern design. They are dug halfway into the ground, laid out in the form of a lower frame of trees and other vegetation, children's paths are made of them, hung as a swing, painted in different colors.

Ask your friends - they will not only tell you how to make flowers out of tires with their own hands, but also show photos confirming the unconditional veracity of these stories.

If the urban environment, significantly limited by public interests and tastes, has adopted such design tricks, then God himself ordered summer residents who have a personal space for fantasy, as they say.

Tire selection

When choosing tires for a future flower garden, you need to take into account not only their size (weight, by the way, too - there are such giants that you can’t budge), but also other features, of which the most important, in terms of facilitating subsequent processing, are the following:

• winter tires are preferable to summer ones;
• foreign tires are softer and thinner than domestic ones.

Important! Another important point -the presence of a disc that will perfectly serve as the bottom of the "tire" flower vase. Without this element, we can only talk about tires taken off the wheels and equipped with our own hands.

Plant selection

Starting planning and, which will be done with our own hands in the country, we hope so that later we will not only admire them ourselves, but also show our friends photos of these spectacular structures made of tires, inviting guests to our place and satisfying our little vanity.
As for plants, the choice is rich:

• flowers different varieties, including those replacing each other in terms of flowering;
• small (although this is optional) trees.

Important! General rule one thing: the flower bed should be beautiful and match the overall style of your site. It is possible that the style itself can be built on the basis of the flower and plant layout.

Making a flower bed with your own hands: the easiest option

Now the most important thing is to create beautiful (if you decide that one is not enough) of tires with your own hands in the country: the result should be such that the photo is not ashamed to be shown to people, acquaintances and strangers.
The processing of the selected (this was the first step) tire begins with marking it for subsequent cuts (this will be the second step). There are unpretentious landowners who use tires without pre-treatment, but it is still recommended to combine the beauty of living plants with a purely technical aesthetic.
The intended cut should be like this:

• the upper tire part is removed (not completely) and the lower part is left (completely);
• having shown imagination and ingenuity, the cut line can be made wavy, broken, with teeth, with fringe, etc.

Finely apply our idea on the rubber and proceed to the third step.
They will be the cutting process itself:

1. The tire is divided into two parts along the drawn line.

Important! If the disk is available, then during the procedure it is not necessary to remove the tire from it.

2. The lower part is turned inside out - this part of the process is the most time consuming, since it requires physical stress. The mechanism is as follows: with a cut, this conditional half of the tire is placed on the ground (or on the coating), its edges are pressed with the legs (and, accordingly, with the whole body weight), and then turned inside out, starting from one place (this is the most difficult) and, gradually accelerating, making full circle.
It turned out either a vase (if there was a disk), or a future one.
caring owner and upper part a cut tire will not be ignored. He will cut it across with it several times. inside(10 centimeters) and make another flower bed, digging the resulting cuts into the soil.

Finally, the fourth step in creating a country flower garden will be the transformation of a car tire, albeit already processed quite skillfully cutting tool, into a beautiful decoration for garden flora.
This final step involves:

1. Painting (who prefers enamel, and who prefers oil paints).
2. Adding additional decorative elements (glasses, pebbles, etc.).

Did you know? In African Kenya, local shoemakers got the hang of making excellent slippers from end-of-life tires, the demand for which spread throughout the continent.

Original flowerbeds from tires (photo)

At the end of the topic, let's admire the examples of "wheel-garden" art. From the options placed here, you can choose something for yourself. And for a person prone to artistic and technical creativity, photographs will suggest their own ways of aesthetic design of their summer cottage.

Very often, gardeners accumulate things in their summer cottage, which are a pity to throw away, but it is not clear what to do with them so that they serve a second life. However, it’s worth a little imagination, and the garden plot will be decorated with beautiful flower beds made of tires and other improvised material. And old tires that have already served their time can help in the design of flower beds.

About how from old automobile rubber tires do beautiful flower beds than to paint them, and will be discussed below.

We select and prepare tires for making flower beds with our own hands

old car tires after long-term use will be soft and easier to give the desired shape. Tires can be asked from neighbors - motorists who do not need them. You can also pick up used car tires at service stations, because otherwise they will simply be thrown into a landfill. And if there is an opportunity to choose between domestic and imported tires, then it is better to make flower beds from imported tires. because tires of foreign manufacturers are much softer, so it is easier to give them various forms, turn inside out, etc.

Dirty tires should first be cleaned as much as possible from dirt and sand. Indeed, it is more pleasant to work with clean material, and the blades of knives will become dull faster when working with tires soiled with mud and sand.

Stages of creating a flower bed from tires

Before making a flowerpot or a flower girl from an old tire, you should carefully consider it. appearance: in the form of a bowl, which will have even edges, a flower bed, in which the edges will be cut off by waves, or a vase in the shape of a flower with petals and a fringe.

You can come up with any shape for tires, but it usually always comes in the form of a “pot - lid”: the bottom of such a flower bed will be deep, and the top must be cut off. The contours of the cut can be easily applied with ordinary chalk.

If from old tire the owners decided to make a flower bed in the form of a flower, then along the edge of the product, draw the contours of the petals with chalk, and then cut along the contour with a sharp knife. Each of the petals should not be more than 12 cm. If the petals are made larger, then the tire cannot be turned out, and the shape of the flower bed will be uneven.

When the tire is cut along the contour, then along the grooves it is necessary to cut the tires in the longitudinal direction (the distance between such cuts is up to 10 cm).

In order to create a flowerpot from a tire on a leg, the tire is first turned inside out. Many gardeners do not get this the first time. In fact, it is not easy to turn the tire in this way.

The metal cord is usually cut with a grinder in several places. Rubber is cut smoothly with this saw. The cuts are made over the entire surface of the tire at an equal distance from each other (about 15 cm). And only then you can start turning the tire. It should be remembered that it is difficult to turn out only the first piece of the tire, then it will be much easier to turn the product out.

How to make a flower bed out of tires with your own hands (video)

How to cut a tire for a flower bed: options and technology

Any tool used for cutting car tires, should be well sharpened. Old tires can be cut with a shoe knife. To facilitate the cutting process, the blade of such a knife is lubricated with liquid soap.

It is great if it is possible to use jig saw. With this tool, you can cut out various shapes and crafts from the wheels.

For sawing metal discs, you need to use a saw - a grinder.

You can cut tires in different ways, depending on the shape of the future flower bed. You can cut the tires in half, or cut off just the top.

How and how to paint tires for flower beds

However, it is not enough to give old tire unusual shape. After all, black or dirty - gray flowerpots look ugly against the general background. garden plot. Therefore, it is necessary to paint the outer part of the flowerpots, which were made from wheeled slopes.

To paint these rubber products, use any type of paint:

• oil;
• enamel;
• nitro enamel.

If the outer part of the tires is clean, then the paint will lie on it evenly, and it will last more than one season on the tires. Can be used to decorate flowerpots car paint.

Craftsmen use for painting work aerosol cans with paint. In this case, it is possible to paint all prepared flower beds from car tires in a short period of time. It is better to use light shades of paint when painting tires - in this case, the soil inside the tires heats up less.

Most often, gardeners paint only the outer part of the tires. However, it is much more aesthetically pleasing to paint the tire on the inside (at least its upper part).

Decor options

There can be a great variety of design options for flower beds from car tires - it all depends on the imagination of the owners and the availability of various colors of paint.

You can combine different colors and shades. Moreover, it is possible to paint the lower part of the flower bed with a darker paint, and the upper one with a lighter one. You can apply an ornament of a different shade to the main color. However, do not try too hard when painting tires - when the flowers grow, they can completely cover the outer part of the flower bed.

Some craftsmen do not stop only at painting such flower beds - they can stick glass pebbles on the tire petals, creating a dew effect.

The right combination colors when painting flower beds from car tires, which is "consonant" color scheme plants planted in such flower beds will give the garden plot a unique flavor.

How to make a swan from a tire with your own hands (video)

Original ideas for decorating a flower garden from car tires

When decorating flower beds with car tires, you should not hold back your imagination. After all, from old tires you can build not only flower beds, flowerpots and bowls for flowers. Tires can be used in the manufacture garden swing, armchairs and ottomans, various decorations for the garden plot, hedges and much more.

• Tires can be cut in half and dug around the flower garden or along the path, separating the flower planting area from the garden path. These tires can be painted in various colors, as well as painted, for example, with flowers or.
• You can install the main tire with petals cut out in the upper part on a pedestal of several tires stacked on top of each other and painted in different colors.
• Flowerpots made of tires mounted on legs, like stools, look original. It is possible to install a smaller tire on the lower tire filled with earth, and plant flowers around the circumference in the lower tire, and place flowers in the upper one throughout the space of the flower bed.
• Craftsmen carve various birds or animals from tires, planting flowering plants in the inner part of such flower beds.
• Tires look interesting - flower beds suspended or screwed to the wall of a house or utility room.

If the garden plot is small, then it is more appropriate to place flower beds made of car tires carved in the form of a frog, a beautiful swan, a carriage from a fairy tale, a bright firebird or an exotic parrot. But on a large lawn, flower beds made in several tiers, or structures made vertically will look better.

Hill of car tires

Slides from used tires look original. The height of such slides depends only on the imagination of the site owners. Small slides of several tires look beautiful, staggered on top of each other. Moreover, in each of these tires you can plant various varieties colors.

The size of such slides, both in width and length, and in height, depends only on the imagination of flower growers and the size of the area allocated for such flower beds.

You can paint tires in such a flower garden both in the same way and by combining shades.

What flowers to choose for planting in a flower garden from tires

Planted in flower beds from car tires better flowers that will delight with their flowering all season. Flowers planted in a flower garden from tires are usually unpretentious.

Moreover, you can plant flowering plants of various heights and shades of flowers. Curly flowers can be used.

It can be such plants:

• fragrant tobacco;
• petunias;
• marigold;
• forget-me-nots;
• tuberous begonias;
• calendula;
• sunflower;

• carnation Grenoble;
• tradescantia;
• nasturtiums;
• Phlox subulate.

Free space between flowering plants can be supplemented with spruce cones - this decoration looks interesting, but on next year such cones have to be replaced with fresh ones.

What can be done from tires (video)

Combining different kinds and varieties of flowers, you can create compositions of extraordinary beauty in flower beds from old car tires. It all depends on what colors the grower wants to see on his site.

Old car tires can be perfectly used to improve the overall interior of the garden. Most often they are used specifically for the design of flower beds or flower beds. And here it all depends only on the imagination of the owners - and there are a great many options for flowerbeds from old tires.

There are many ways to improve the look of your garden, front garden or lawn for free.

For example, from old tires you can make various and that will decorate the local area.

In this article we will tell and show in the photo:

• how to make flower beds and flowerpots out of tires;
• how to make flower beds and beds out of tires;
• how to make a basket or planter out of a tire;
• what other crafts can be made for plants;
• how to paint wheels

There are a few basic types beds of tires, which are ubiquitous. To do any of them, need to cook:

• tire;
• knife or electric jigsaw;
• paints;
• brushes.

Depending on the model may need additional:

• drill;
• self-tapping screws;
• rope;
• or plywood.

For example, to make a flower bed in the form of a chrysanthemum, you will need an old cup or any round container on which you can trace circles to cut out the petals. Step by step instructions are shown in the photo below.

The knife must be taken sharp because the rubber on the tires is very thick. Cutting will not always be convenient, but do not lose heart.

Things will go faster if you use instead of a knife jigsaw. It is possible that nothing will work out the first time, but having stuffed your hand, you will be able to make flower beds from improvised material not only for yourself, but also for your loved ones.

In order to turn the tire inside out and give it shape, it will take man's strength. You can just make a flower bed, or you can use the cut out part to give the structure volume. In this case, the cut out circle is set down instead of the leg and a beautiful pot of tires is obtained.

A multi-tiered flower bed looks attractive, in which flowers are selected, both in color and in height.

For the manufacture of this design, you will need 14 tires, which must be carefully positioned and filled nutrient soil. It is problematic to find such a number of old tires, therefore you can use only 7 pieces, after cutting them in half.

In the second case, the tires will perform 2 functions: decorative and as a side of a multi-tiered flower bed. Such a flower garden will not only please the eye, but will also significantly save time during weeding. Even if the weeds penetrate there, it will not be difficult to remove them.

Nutrient mixture before laying in a flower bed, you need especially check carefully for weeds.

If a piece of the root of any weed gets into a limited space, it will soon be difficult to get rid of it.

The final step is painting the sides. flower beds. For this, it is selected Oil paint desired color.

Before painting, you need to wash off the dirt from the tires and dry them.

To prevent the formation of small cracks in the paint, it is necessary apply at least three layers. Layers should be thin.

A flower bed will always look spectacular white color. The rest of the colors should be chosen carefully, understanding that the color determines the first impression. The sides of the flower bed look harmoniously in the same shade as the blossoming flowers that will be planted there.

Making a flowerpot

In order to independently make a flowerpot from tires, it will take a little time and effort. Need cook the following materials and tools:

• tire;
• jigsaw;
• round container;
• chalk or white marker;
• brushes;
• oil paint.

Instructions for making a flowerpot:

1. Remove disc cap for a while.
2. Apply to the surface tires chalk outline. If round petals are supposed, then you need to draw circles around the perimeter using a cup or a round container. If there are teeth, then you must first cut out one part from paper or cardboard and, applying it, draw the same shapes around the entire perimeter.
3. According to the drawn outline cut curly board flowerpot. The resulting circle does not need to be thrown away, it will serve as a leg for the resulting flower garden.
4. turn inside out tire, giving it the desired shape.
5. Put the cap back in place giving rigidity to the whole structure.
6. Substitute the previously cut circle under the flower bed, making a flowerpot leg out of it.
7. clean the surface from dirt and dust. Dry.
8. Paint with oil paint.

Such a flowerpot looks spectacular both on the terrace and on the lawn. You can plant flowers in it ornamental plants different heights: it can be low marigolds and sprawling castor beans. Looks good in this design. ampelous plants.

Baskets and planters for pots

They look attractive among the greenery of the garden or on the lawn. swans from tires. They can be left as garden decor, or used as planters for low pots. To make them, they take a tire and draw a contour on it, along which you then need to “pass” with a jigsaw or a sharp knife.

For fixing a long neck swan can use thick wire, which can then be colored.

In order for the paint to hold better, you need to degrease the surface of the tire and additionally prime it before painting. For a swan, two types of paint are most often used: white and black.

Garden beds for growing crops

Old tires can also be useful for growing vegetables in the garden. Their main advantage is that in such beds grass doesn't grow much.

As you know, weeds significantly interfere cultivated plants develop, and sometimes they are simply drowned out.

For the manufacture of beds you will need an electric jigsaw. They cut out the side surfaces of the tires.

On such small beds you can plant radishes, greens and other healthy vegetables. Such a bed has undeniable advantages if the site is virgin land where nothing grows.

A few beds and some land are enough to grow good harvest pumpkins and zucchini. Under such a bed, even the most malicious weeds will not be able to develop and gradually rot. To speed up the process you can put under the tire several layers of newspapers, and then fill the bed with earth. To make a long ridge of tires, you need to cut and then fasten them, forming a curb tape.

The second advantage will be the possibility of sheltering tender plants from cold weather. It is enough to fix a thick wire on the tire, on which you can put a film or spunbond.

High ridges can be equipped with tires, hoisting them on top of each other. Such a bed is very useful for plants, since it is half filled with various organic waste: branches, weeds.

All this rots, forming compost. Pumpkins grow well on such beds.

What else can be made from plant tires?

Old tires give space for creativity to those who are engaged in gardening. If you add wheels to the flower bed, then you can realize other original ideas and get from them interesting detail in the garden landscape- in front of us in the photo is a cart made of tires that carries flowers.

From tires different size it also turns out a beautiful multi-tiered flower bed. And for those who have little space in the garden, you can make a vertical bed out of several tires.

The video shows various interesting options decoration of flower beds from tires:

Conclusion

Useful and beautiful flowerpot, flower bed, planter can be built from things that have worked out their age. Instead of littering the environment, tires can serve many more years as decorative detail Location on.

We talked about other ways to get rid of old tires. And their advantage in the garden compared to other materials is obvious: they are light, they can be easily moved from one end of the garden to the other.

In contact with

To make flower beds, you will need:

• chalk or marker to mark the drawing;
• a sharp knife with a thick blade;
• electric jigsaw;
• extension;
• a set of files;
• any, including used, machine oil.

Preparation for work

With the help of worn tires, you can make original flower bed at no extra cost

First, take a close look side surface tires. Special attention pay attention to what is written in small print. You need to look for the word "steel" or make sure it's not there.

The presence of this word indicates that the tire is reinforced with steel wire, so you will need a fine-toothed metal file.

If there is no inscription, the tire is reinforced with nylon, and to work with it, it is necessary to insert a coarse-toothed file into the jigsaw for soft wood. A large-toothed file is easier to cut rubber, because you have to make less effort.

Most often, steel wire is used to reinforce truck tires, but you still need to check the tire so as not to dull the file.

If you have not only a tire, but also a disk for it, you can make two types of flower beds - low and high.

The cutting technology is the same, the difference is in some marking nuances and the way the tire is “turned inside out”. Moreover, it is necessary to determine which particular flower bed you will make before marking.

How to plant and care for club begonia is described in.

markup

When marking, try to draw even, symmetrical lines and do not make the wide part of the petals of the flower bed narrower than 7 centimeters. Smaller petals are much more difficult to cut because the hardness of the rubber is not enough for normal pressure with a jigsaw and file.

Regardless of whether you want to make a low flower bed, low or high, the markup must be divided into three stages:

• marking a small (inner) circle;
• marking a large (outer circle);
• marking of teeth (petals).

A small circle is marked 3-5 cm from the edge rim, if it is not there, then 5–7 cm from the bead ring (a place to install the disk). This is necessary to avoid damage to the file on the disc and to remove thin and overly flexible sections of the tire.

To draw even circle, take the chalk big and index finger, press your little finger against the disk (if you are marking a tire without a disk, then grab the bead ring of the wheel with your little finger) and draw a chalk or marker along the wheel. This will allow you to use the disc or ring as a guide, so you can draw a neat and even inner circle.

We mark the tire like this

If the size of the petals is less than 7 cm, then the large circle is marked as described above. For higher petals, it is necessary to mark as above, but with the little finger to hold on to the top of the tire, or use a tape measure to mark the perimeter of the outer circle. The distance between the marks is 5–15 cm. After the marks have been made, draw a circle over them.

Petals can be marked both by eye and with a tape measure. The shape of the petals is only limited by your imagination. It can be triangles, waves, sine waves, oblique teeth, squares, slots, or anything else you can think of.

tire cutting

Before you start cutting, think again about what kind of flower bed you want to see. After you cut the tire, you will not be able to make changes to the design and appearance of the flower bed.

Using a sharp knife, cut through the side of the wheel along any line. Then insert the necessary file into the jigsaw and lubricate it with machine oil. Connect the jigsaw through the extension cord to the outlet, then insert the saw into the slot in the tire. Turn on the jigsaw and start cutting the wheel.

When cutting tires, follow safety rules

Please note that cutting a tire is a difficult and lengthy business, requiring compliance with safety rules:

1. Try not to hold the tire on the cutting line near the jigsaw with your hand. If the file breaks or pops out of the slot, you will injure your hand. While cutting, push the jigsaw forward strongly, but smoothly, without sharp jerks.
2. If you have enough strength, then instead of a jigsaw, you can cut tires with a sharp knife with a thick (at least 4 mm) blade. But this cutting method is not applicable for steel-reinforced tires.
3. Start each cut only after lowering the knife into the tire to a depth of 2-3 cm and cut only by moving the knife down. This will help you avoid cuts and more serious injuries.

tire eversion

After cutting through both sides of the wheel, it is necessary to unscrew the tire. This operation requires quite a lot of strength and skill, so the first time it may not work.

If it didn’t work out, don’t despair, after a while try again or ask someone stronger to turn it inside out.

It is better to ask someone strong enough to turn the tire out

When turning the tire, do not be afraid to damage it. Tire even from passenger car designed for such loads that cannot be created by hand.

As a result, we should get something like this:

Inverted tire - already almost finished flower bed

Find out, .

We grow, plant and care for stonecrop.

Flowerbed painting

If you have an airbrush (spray gun), then it is advisable to paint the inside-out tire before installation. After all, with the help of a spray gun, you will not only paint a new flower bed, but also hook on the adjacent soil.

If you only have brushes, then it makes no difference whether you paint before or after installation.

For painting, use nitro enamels or alkyd paints.

Wipe the surface of the inside-out tire with a dry, clean cloth to remove dust and remaining rubber chips. Then degrease with white spirit, 646 thinner or acetone. When the liquid dries, paint with a brush or spray gun.

If desired, the flower beds can not only be covered with paint of the same color, but also draw pictures or drawings.

The appearance of the flower bed can be anything, it all depends on your imagination and on the design of the site.

See the photo in the gallery for ideas for decorating a flower bed from a tire:

Almost every summer resident strives to decorate his site as interestingly as possible. They are on the move variety of varieties flowers and plants, original ideas landscape design. And for this it is not at all necessary to use expensive materials and spend a lot of time. You can decorate the site with your own hands using improvised means. For example, with the help of tires, which can stylishly and very funny diversify an empty place.

Pros and cons

For many years, summer residents and gardeners have been using car tires for their garden as decoration. This method of decoration has many advantages:

• Old tires can be very profitable to buy or even free to take from someone. Surely a couple of your friends stale unnecessary wheels.
• There is no risk to this product. For example, moisture, bacteria, fungi are not able to have a negative impact on the product. And if the paint fades and cracks over time, it would be useful to update it.
• With the help of car tires it is possible to realize the most daring design ideas.
• The tire structure is compact, and if necessary, it is just right to rearrange it to another place without any problems.

How to cut flower beds from a tire: step by step instructions

Do beautiful flower bed from car tires with your own hands is simple and profitable, you just need to make a little effort. At the same time, it is important to follow the sequence and recommendations when performing such decorative element. Below you can study the step-by-step instructions for making garden decorations from car wheels.

Select Forms

The first step, of course, is choosing the idea and shape of your decoration. And there are many ideas - in the form of a flower, a well, a tea cup and much more. When determining the final option, be guided by your taste, the features of the garden.

Choose the right tires

Of course, the opportunity to choose is always a plus. Therefore, it is better to select products with the highest tread wear. the worn tread layer softens the tires and makes them more comfortable in terms of making bizarre shapes.

If you have a choice - old car tires of Russian or foreign production, then it is better to stop at the last option. The thing is that they have a thinner, softer rubber, from which it is more convenient to make figures.

And if you have to choose between winter or summer car tires, it is better to prefer winter tires.

Draw cut lines

To draw a cut line, you need to determine what shape you want to make - a flower with sharp or smooth edges, a large bowl, a vase with wavy lines, or even a swan. It is desirable to apply the contour with a felt-tip pen or chalk.

The photo below is an example of a circuit:

Note! If you just want to beautifully paint the tires for the flower garden, then you do not need to apply cut lines and cut.

Cut along the contour

To cut a beautiful flower bed out of tires, it is important to do everything carefully. This will help not only to get a non-standard product, but also to avoid injuries. It is advisable to use a sharp knife or jigsaw if you have one. In the video below you can see how the cutting step goes.

Video: how to make a flower bed out of a tire with a knife in 5 minutes.

Video: how to cut and unscrew a tire with a jigsaw.

Arrange the finished product

The final step in making a flower bed from old tires with your own hands is the design, because black tires in the garden will look depressing and not aesthetically pleasing.

To paint old car tires for flower beds, it is recommended to use enamel, oil, nitro paints, as well as car paint. Their advantages include long-term coverage and ease of application.

There are absolutely no boundaries in decorating a product: you can use only one color or combine several of your favorite colors. Not trite to do beautiful drawings, ornament.

Video: flowerbeds of tires and tires that you can do in the country with your own hands.

Ideas for flowerbeds from old tires

Well

A flower bed made from a car tire in the form of a flower bed is an ideal solution for those who want to achieve a feeling of rustic comfort on their site. In addition, the well will emphasize the beauty of your flowers.

Instructions on how to make a flower bed in the form of a well from rubber tires:

• Take three old tires of the same size.
• In each of the tires, make a slot on the opposite side with a sharp knife. Such an action will help in the future to push the support posts for the roof of the well. But the columns can be made from the outside.
• Lay the rubber tires on top of each other so that their slots match.
• Insert supports, such as beams, bars, into the holes of the wheels. The support must be buried in the ground. However, the ground under the structure must be smooth for the well to be stable.
• It is better to make the roof of the well as natural as possible, that is, similar to the real roof of the well - the design will look even more beautiful and cozy. For this reason, the roof is best made from roofing materials.
• It is necessary to install a support under the roof between the bars.
• After that, boards, metal tiles, slate and other materials are attached to it. It is also not a sin to make a well cover using cut tires.
• After that, proceed to the design - paint the well as you like.

Below you will find photos of a flower bed in the form of a well of tires for inspiration and ideas:

Turtle

The design of the tires in the form of a turtle is truly very beautiful. Thanks to its interesting look, it is able to literally revive any suburban area and make it a little fabulous.

tea cups

Tea cups made of rubber tires will look original in any garden. To make them with your own hands, just follow a simple step by step instructions:

• Take two tires of different diameters.
• Stack them on top of each other - a smaller diameter wheel on the bottom, and a wider wheel on top.
• Fasten them with screws.
• To make the design realistic, make a rubber saucer and a handle from scraps. The latter can also be attached with screws.
• There are several options for painting cups: in some one bright color or make the design as realistic as possible and paint it in one color, and then draw polka dots.

Video: beds of tires and tires in the form of tea cups

Frog

It is clay frogs that very often decorate summer cottages. Green beauties fit perfectly into the garden surroundings. But frogs made of rubber tires will also look extraordinary.

Look how cute the cheerful frogs look!

Flamingo

Flamingo birds of paradise now have the opportunity to live not only in exotic lands, but also in your garden! Just stock up on tires and pink paint. Look at the pictures below which beautiful birds you can make from car tires:

Video: how to make a flamingo from car tires.

Crocodile

Dangerous predators in nature can become cute animals from tires in your country house. Green structures will organically look next to flowers, shrubs, trees.

Photo gallery of ideas

In fact, ideas for creating decorations from tires for the garden and summer cottages lots of. You can already be inspired ready-made ideas or come up with something of your own, very original and unforgettable. Therefore, we invite you to look at the photos from a variety of options for inspiration and new ideas:

beautiful designs from old car tires will add to your garden, garden and summer cottage unique charm. They will not only delight you every time, but also pleasantly surprise your guests.

In contact with