Scheme of a bench with a back. Wooden benches - an element of relaxation and do-it-yourself design

To garden plot was quite comfortable, it should be properly equipped. An important component are garden benches. You can make them yourself in different ways and from various materials.

Bench made of concrete slabs and boards with backrest

By looking at the drawings of the bench, you can find out the features of its structure. You can make such a design with your own hands relatively easily, quickly and without high financial costs.

Making a bench with a backrest with your own hands in step by step instructions described in great detail.

Assembly: initial stage

After the preparatory work, it’s time to process the wood. In order for a hand-made bench with a back to serve for a long time and decorate the area, the materials must be pre-treated.

The tree is covered antiseptic compounds and let it dry. After this you can start collecting backrests

On one of the two-meter boards, fifty centimeters are measured from the edges. At this level the edges of the beton slabs. From this mark another fifteen centimeters are measured towards the center of the board. This is where the first boards will be attached. From the resulting marks we measure seventeen and a half centimeters - the gap between the back boards. Next, we measure fifteen centimeters for two more boards. There should be a gap of five centimeters between them. All this can be seen in the drawing.

Wood glue is applied to fifteen centimeter sections. They are attached to boards, the length of which is sixty-five centimeters. Additionally, they are secured with self-tapping screws.

On top, between the boards of the back, pieces of seventeen and a half centimeters are glued. To ensure that the parts stick together well, they are clamped and held until the glue sets. After gluing is completed, the back is covered with an antiseptic.

All wooden parts can be coated varnish. This will give them additional stability and attractiveness.

Assembly of the main part

It is better to assemble the main part of the bench from both sides. Placed between the boards concrete slabs, and in drilled holes insert M16 threaded rods fifty-five centimeters long. You will need four of them.

The rods are fastened with M16 nuts and washers. They are twisted simultaneously from different sides to make the bench level.

Simple DIY bench

You can make benches for your garden with your own hands quite quickly if you follow the instructions. Let's consider four options for such garden structures.

On drawings benches, all its features are indicated in detail. Making such a bench with your own hands is quite simple. The only one complex element is a concave seat.

The number of parts and their dimensions are indicated in the table.

We begin making a bench with our own hands from wood with blanks necessary details. Boards and beams are cut into pieces of the required length.

Making seat supports will be somewhat more difficult. You will need to mark the blanks. Two points are marked along the edges at a distance of seven and a half centimeters from the bottom side, and in the center a point at a distance of four and a half centimeters. They are connected using a flexible plastic ruler and cut out jigsaw. The sections are processed with sandpaper.

The seat supports are attached to the two upper drawers. One on each edge and one in the middle. Next, screw in the supports, spaced from the outer ones by the width of the leg. All connections are made with self-tapping screws.

Boards are attached to the resulting base seats. It is advisable to deepen the screw caps.

Then attach legs. They are attached to the seat supports. The lower drawers help secure the legs.

The finished product is coated antiseptic and varnish.

Simple bench No. 2

To make such a garden bench with your own hands, you will need concrete flower girls and boards. Flower girls are required to create the base of the bench. Use two with a rectangular base and two cubic ones.

To make the base stable, the flower boxes must be glued or connected from the inside with staples secured with self-tapping screws. The container is filled with a layer of drainage and soil. This increases their stability.

The seat for the bench is made of boards. To do this, they are cut into pieces of the required length. These blanks are laid so that there is a distance of half a centimeter between them. Then they are connected using transverse strips. The planks are placed in three places: at the edges and in the middle. Corners are attached to the slats. With their help, the seat will be secured to the flower girls.

DIY bench with backrest

Prepare the bench parts shown in the figure. They are being processed antiseptics before connecting.

Then the parts are assembled into supports. The corners are first rounded and chamfered. First, parts A and B are connected with a bolt, and then B, C and D are also connected using a bolt.

The inclination of the backrest is determined by part D, after which it is connected to part A. Similarly, but in a mirror image, another support is made.

After this, the back and seat are assembled. To do this, the supports are placed so that there is a distance of one meter and twenty centimeters between them. First, the front and rear strips are screwed to the supports, then all the rest, and finally the stops are screwed in.

At the last stage, the back of this bench is screwed on.

Bench No. 4Another option for a simple DIY bench. Its length is one hundred twenty centimeters. The height from the ground to the seat is fifty centimeters, the height of the backrest is also fifty centimeters.

The base is made from boards, the thickness of which is five centimeters and the width from ten to twelve. One of the legs continues and serves as a support for the back. The supports are connected using the “half-tree” method and secured with bolts.

The basis for the seat is a block secured with self-tapping screws. The short supports on the back of the bench are connected with a collet to increase stability. The seat and back are covered with boards of less thickness. The surface is painted or varnished.

A simple bench with a back for a summer cottage

The dimensions of the structure and wooden parts can be seen on drawings benches. If we consider how to make a bench with your own hands, then this option will prove to be the most optimal in terms of the simplicity of the process and the result obtained.

It is better to purchase materials already cut to size. If this is not an option, then you need to cut them yourself.

The resulting blanks polished. The ends of the boards are processed with an electric planer.

The back legs of this simple DIY bench also support the backrest. To create the desired level of inclination, the workpieces are marked.

At a height of forty centimeters, mark the attachment point seats. Above, the board is cut at an angle of twenty degrees. The cuts on the two workpieces must be identical.

First they collect legs benches: the front ones are connected to the back ones using a beam. It is better to do this from above and below.

When the side parts are assembled, they can be connected to each other with seat boards. Screw the boards with self-tapping screws, leaving a distance of one or two centimeters.

To strengthen the structure and increase its stability, make the lower harness timber along the legs. Two boards are attached for the back.

Finish the work with finishing coated, which will protect the product from moisture and adverse conditions.

DIY pallet bench

Make a bench with your own hands from pallets It’s not difficult if you use your imagination. To do this you will need three or four of these wooden structures. Some will need to be sawed to obtain additional parts. The simplest DIY bench design is made from pallets, when two pallets are attached perpendicular to each other, creating a back and seat.

To prevent the design from becoming too bulky, it is better to cut the pallets to the required size. The elements are fastened with self-tapping screws. Add side parts to enhance strength and make legs. All this can be seen in the photo.

Since the material of the pallets is untreated and rough, it will be required first polish. This will allow you to avoid splinters.

The manufacture of a bench with your own hands from pallets is completed by coating it with varnish or paint.

Bench puzzle

You can make such a bench with your own hands if you have a wide board and cuttings for shovels. Curly seats are cut out of the board in the form of puzzle pieces. Legs made from cuttings for shovels are attached to them. You get separate stools that quickly assemble into one long bench. All manufacturing stages are discussed in detail in step-by-step photos.

Benches from unnecessary chairs: two DIY options

First option

To create such a bench for your dacha with your own hands, you will need four old chair.

From the first two chairs remove parts from the front of the seat.

The remaining sawed off the front legs are slightly lower than the seat structure.

From the resulting parts you need take off old varnish or paint. To do this, apply to the parts special remedy, dissolving paint coatings. Then the softened layer can be removed with a spatula.

The racks should drill holes for dowels. Holes are required on the front and end sides.

The dowels are lubricated with glue and inserted into the drilled holes.

When the dowels are glued, you can assemble base benches. To make the structure durable, the parts are fastened with self-tapping screws. Surface of the structure sanded.

For seats benches choose a board that is suitable in size, saw off the excess.

If several narrower boards are used, they are glued together with wood glue. For a tight connection, they are clamped with clamps and wait for the glue to dry.

The finished seat is also glued to the base with wood glue. Heavy objects are placed on the board and clamped together with the base with clamps.

When the glue has dried, cover the seat with masking tape and paint paint the remaining structural elements for wood.

The tape is removed and the seat is treated stain. Finally, the entire bench is varnished.

Second option

To make a second garden bench with your own hands from old furniture you will need two chairs. It is better if the back and hind legs are not separated.

Two identical chairs clean up all parts of the structure except the rear legs with the back.

They take bars five centimeters wide and three centimeters thick. Cut two parts equal in length to the width of the chairs, and two pieces of the same length as the finished bench. A rectangle is assembled from these four parts. It is secured to the backs of chairs with self-tapping screws.

Another frame is assembled in the same way. Several transverse strips are attached to it. This design is attached under the seat, makes the bench more reliable and acts as a shelf.

If the chairs have old covering, then it is removed sandpaper. After this, the surface is puttied with a special compound or coated with a primer. When the layer has dried, it must be sanded with fine-grained sandpaper. Finally, the structure is coated with paint.

The seat for the garden bench is made by hand from Chipboard or plywood. A rectangle is cut out of the selected material, which is half a centimeter larger than the base on each side. Then cut out a piece foam rubber with the same dimensions. From upholstery fabric cut out a rectangle. It should be five centimeters larger than the seat on each side.

Foam rubber is placed on a sheet of plywood and covered with fabric on top. The fabric is attached from the inside out to the furniture stapler.

The seat is attached to the base with a piano hinge.

Bench-swing

To make such a bench for your dacha with your own hands, you should prepare necessary materials. Manufacturing begins with creation basics designs. The seat bars are attached to the back bars at the selected angle.

Additional ones are installed along the seat ribs, providing rigidity.

Attached to the seat planks, drilling holes for fastening in the base bars. The same goes for the back.

Armrests are installed on both sides of the seat. They can be secured with bolts.

The resulting bench cover wood protection products and varnish. It is very important to paint everything as carefully as possible.

The bottom of the bench is reinforced with metal profile. Chains are attached to the profile on which the swing bench will be suspended. It is imperative to check the reliability of the beams on which the bench will be suspended.

Log bench

To make such a bench with your own hands from wood you will need chainsaw. The main material is taken thick log one meter long.

Log mark, so that you get two slightly unequal parts. The back will be made from the smaller one, and the seat from the larger one.

Chainsaw log sawed along the mark. The resulting irregularities are immediately cut off with the same saw.

The cut triangular piece is cut into pieces and inserted into the holes in the seat. The back is secured on top. The bench is almost ready. All that remains is to give it a more decorative look.

Can the seat be placed on legs. To do this, recesses are made in the lower part to install a pair of logs as legs.

Transformable bench

The design features of the transformer can be seen in the drawings of the bench. A transformer bench is made with your own hands from planed boards, which is sawn to the specified dimensions.

Sliced timber parts holes for fasteners are drilled.

At the table top, the boards located on the edge can be made wavy.

In material intended for countertops, drill holes with a diameter of twenty-two millimeters and a depth of three centimeters. Cuttings of the same diameter will be inserted into them.

The edges of parts and edges are processed and rounded.

All elements are assembled using screws and screws. Screws are needed with dimensions 6x70 and 6x90, screws - 8x80.

Wooden parts are painted stain.

The structural parts that will move are connected by hinges.

Between the boards of the tabletop there are placed parts of a round cuttings

Install a stop for backrests

A hand-made transformer bench is covered varnish.

Rocking bench

Making an original bench with a backrest with your own hands is not difficult if you have the tools and materials. First you need to consider the drawings of the bench, which do not contain large number details.

The side parts according to the pattern are transferred to Europlywood three centimeters thick. They are cut out using a jigsaw and the ends are processed with a grinder.

To fasten connecting strips, markings are made. Then the holes are drilled. After assembling the frame, the slats are attached using self-tapping screws. The fastening points are sprayed, and the entire product is varnished.

Bench around a tree

The simplest version of such a bench is hexagonal The size depends on the size of the tree. Measurements are taken at the seat height. To the result obtained, add another margin of fifteen to twenty centimeters. If you divide the result by 1.75, you will get the length of the inner side.

To cut boards ten centimeters wide, they are laid in four rows with intervals of one centimeter.

The cutting location is marked for all rows at once with an angle of thirty degrees. So cut out six sets of blanks.

Legs are used with a height of sixty to seventy centimeters. They are connected by cross members by drilling holes and using bolts and nuts.

The seat is installed so that the joints are located in the center of the ribs of the legs. The outer parts are screwed on first, and then the inner ones. In this way, the entire hexagonal structure around the tree is assembled.

Finally, the back is made and the apron is installed. The result is a DIY circular bench with a backrest.

The finished product is processed oil impregnation.

Bench made of curved branches

A bench made of curved branches will look original. It will require branches for the front part, two legs, a horizontal top and a pair of transverse branches.

Sawing branches so that they fit each other as accurately as possible. Next they are connected by metal corners.

The back part is made in the same way and connected to the front.

The finished product is placed on a flat surface and the seat is assembled.

Bench options

Log bench, which blends well with the surrounding nature. It consists of half a log, used for a seat, and two short round logs, which are legs.
Beautiful wooden bench with a back and armrests, reminiscent of a sofa. Curved and cut elements make it more attractive, while leaving knots and irregularities gives the structure a natural look.
Bench made of wood and metal. The base of the structure is metal. The wooden parts of the seat and back are attached to it. The thin metal parts make it look lightweight.
The bench has a simple, classic shape. It is made of wooden, rather wide boards. This width allows you to sit comfortably on the bench. Armrests make the design more complete.
Original bench made of wood with figured details. This option is well suited for a site with a natural, rural design. Carved legs and armrests, a figured back - all this gives the product originality.
Bench with an interestingly shaped back. The curved parts gradually bend back, creating a unique design. The seat is slightly curved but has a more traditional appearance.
Wooden complex- a table with two benches. The design looks traditional due to the material used. An original solution is the fastening of all components into a single structure.
The bench is made of solid logs. A single piece is cut out of it, combining the back and seat. The legs are attached to the bottom. The log required is quite large.
Bench with storage box for toys. Outwardly it looks like an ordinary wooden bench-sofa, but under the seat there is a drawer in which you can put various things.
A comfortable bench made of wood with a simple shape. The base is made in the form of a rectangular box. The back is also simple with a straight shape. The seat has soft cushions for additional comfort.
Wooden bench located around a tree. It is made as if it consists of four benches, each of which has one armrest. The composition looks attractive and comfortable.
A simple bench made of wide boards. It looks solid, but its dimensions are somewhat concealed due to the gaps between the boards and the light blue, in which it is painted.

Bench - essential attribute summer cottage or local area. Often there is room on the site for not one, but several benches. One in the yard, another in the garden, the third at the gate. A bench with a backrest is probably the simplest and most useful project which can be done at the dacha.

The beautiful wooden texture of the bench will look harmonious in any garden, especially if you use not just boards for the bench, but all parts of the wood that are available to you in the garden.

In order to do a simple bench, you don’t need special skills or expensive tools, and wood in the country is one of the most affordable materials.

If you've never made a bench yourself, we'll show you the basic process so you can create your own little masterpieces.

We hope these beautiful benches will inspire you to create your own example.

DIY bench with backrest

To begin with, we suggest mastering simple design, which is easy to manufacture and has good rigidity and stability.

Wooden bench. Preparation of materials

In order to make a bench, you will need:

2 short front supports [A];
2 long rear supports (the backrest will be attached to them) [A];
8 short crossbars for tying supports and adding rigidity [B];
long boards for the seat and backrests (their number depends on their width and the desired dimensions of the bench) [C].

If you are planning to make a long bench with a backrest with your own hands, then make sure that your boards that you have prepared for the seat will not bend under the weight of the people sitting on it. And if the boards really sag, then this can be corrected - you can assemble another support and place it in the middle.

Every detail needs to be polished so that after relaxing on the bench you don’t have to pick out splinters from various interesting places.

Remember also that if you want to dig in a bench, your supports must be at least 40cm longer.

Garden bench. Execution of work

Once your parts are cut to size and sanded, you can begin assembly. For this it is better to use self-tapping screws, but if you do not have a screwdriver, then the bench can be knocked down with nails.

It is important to screw the crossbars with at least two self-tapping screws to each support as shown in the picture. And the greater the distance between the screws, the stiffer the structure will be.

Now all that remains is to paint and let the paint dry.

And this is what you can get. You can give the bench a different look without changing the design. Just use rougher wood and it's a completely different thing! Although structurally its differences are minimal, and it is done in exactly the same way.

DIY bench

But even if this seemed too complicated for you, then there is a design for you for a bench with a back, which can be done with a hacksaw and a hammer in literally a matter of hours.

All you need is six boards of the same thickness (preferably at least 40mm).

Its scheme is elementary simple.

Once all the pieces are cut to size and sanded, it comes together in minutes!

It’s better to drill the holes for the screws in advance so that the board doesn’t split during assembly.

This bench looks laconic and modern.
And this is not surprising, because there is nothing superfluous in this design. Each structural element is absolutely necessary and at the same time minimally sufficient. Your bench with backrest can be made in any way, we have shown only the two simplest ones.

Benches photo

If you enjoy working with wood, you may want to expand your skills and add some new original pieces to your bench.

If you uproot tree stumps in your dacha, consider yourself the proud owner of unique material for your next DIY bench.

Often those of us who love and know how to do something with our own hands are simply embarrassed to waste our time on this “nonsense” - it is more important to dig up the garden on time.

The pleasure you will get while working on your garden bench project will give you truly happy moments.
And those around you who were puffing about why you are busy with frivolous things will be proud of your bench, which you made yourself, and tell everyone that you are so unexpectedly talented.

And we are sure that these successes will inspire you to try new ideas, because benches made by yourself are always more practical and comfortable than ordinary standard ones.

Garden benches today have not only a practical purpose, but also an aesthetic one. They are used as a complement to a pre-designed interior. Making a garden bench with your own hands is quite simple, it requires minimal skills hand tools. Optimal material For the manufacture of such items, wood is used, since it is the easiest to process.

Preparatory work

Before you start doing the work, you need to find drawings of garden benches on the Internet and select suitable option. You shouldn't focus too much on complex structures, if the skills of a professional carpenter are not available.

Tool selection

When all stages of work are planned on paper, you should prepare necessary tools. If a garden bench with your own hands is made from ordinary wood, then The following items will be required:

screwdriver with a set of bits and drills;
hammer;
plane;
grinding machine;
hand saw or circular saw;
level with a ruler.

It is very important to use high-quality and reliable measuring instrument. Otherwise, the product may end up asymmetrical.

Material

It is equally important to choose a tree with suitable dimensions. This will minimize processing - most of the time is spent on adjusting the dimensions of individual parts.

The wood must first be well dried. Otherwise, after completing the manufacturing process in the sun, the entire structure may become distorted. This will make it impossible to use the garden bench.

When everything preparatory work finished, you can proceed directly to assembly.

schematic drawing of a garden bench

Manufacturing and fitting the main parts of the bench

Making a garden bench with your own hands begins with preparation main components:

1- front legs;
2 - hind legs, turning into the back;
7 and 4 - cross beams;
6 - longitudinal beam;
3 - slats for the back and seat.

It is very important to avoid using wood that has any serious defects in its structure. Such as knots and others like that. Inclusions of this type reduce the strength of the bench, especially if it is located outdoors. A breakdown can occur at the most inopportune moment, leading to injury.

If for some reason you have to use material with defects, it is necessary to treat the illicit area as much as possible using grinding machine or a plane.

All elements of a garden bench made of wood must be made strictly in accordance with the dimensions indicated on the drawings. A discrepancy of even a few millimeters will lead to the subsequent need to redo the entire structure, and the parts of the garden bench will need to be aligned.

Assembly work

When all the necessary elements are ready for the garden bench, all that remains is to securely connect them together. This stage no less important than all the others. You can make a connection in various ways. The most commonly used hardware elements are:

nails;
self-tapping screws;
bolts, washers, nuts;
wooden chops.

The choice of a specific connection method depends on the load that will need to be withstood. garden shop or a bench. If a child will use this piece of furniture, then it is quite possible to get by with ordinary nails or self-tapping screws. If the load reaches several tens of kilograms or even hundreds, then it is best to stick with bolts and nuts.

To connect the elements of a wooden garden bench using bolts, you need to prepare a drill, as well as a drill of the appropriate diameter. It should be slightly larger than the diameter of the bolts used. This will allow you to insert them without much difficulty. If the hole size is larger than the diameter of the bolt head and nut, then special washers should be used.

In cases where it is necessary to hide the presence of joints with bolts, you can use a special crown. With its help, small recesses are drilled in places where the bolt passes through the wood. The washers seem to fall into the resulting niches.

It is very important to choose a sufficient depth. Afterwards, the niche itself is carefully filled with a mixture of PVA glue and small shavings. Or round elements of suitable size are made and glued into the niche. In this way you can make a garden bench as aesthetically pleasing as possible.

To make all the holes as symmetrical as possible, just arm yourself with a pencil and a ruler. Using these tools, distances from the sides are measured wooden elements benches and two segments are held. A hole is drilled at the intersection.

After all the holes are prepared, you should arm yourself with wrenches of a suitable size for tightening the bolts and nuts. Assembly is performed in the following order:

a base consisting of legs (element 1 and 2) is assembled, as well as longitudinal beam(item 7);
cross beams are screwed (elements 6);
beams are added to strengthen the structure (elements 4, 5);
V last resort beams are nailed, playing the role of a seat (element 3).

The last step is the production of special wood plugs. For this simple operation, a jigsaw is useful, but you can also use a simple hacksaw with fine teeth. To prepare such elements, you should select a small round beam of a suitable diameter, cut it crosswise into pieces, the thickness of which will be equal to the depth of the niche where the bolt and washer are located.

Most often, the following diameters are used for the manufacture of plugs, mm: 15, 20, 22, 24, 30, 32, 35.

After the plugs are ready, you can simply glue them with PVA glue or waterproof sealant - if the bench will be located outside all year round.

Protecting a garden bench from moisture

The last stage of making a garden bench with your own hands is to protect it from moisture. This will extend the life of the product as much as possible. long term. This is quite simple to do - you need to stock up on a roller, a container for a special composition, and also a means to protect against rotting.

Impregnation with antiseptic composition

It is important to choose an impregnation, a composition that has a penetrating effect. It contains various types of acrylic resins and other additives. All this is often mixed with a special antiseptic composition that prevents rotting and damage to the tree by various kinds of insects. Which is especially important in the garden.

During the work it is advisable to use such protective equipment like gloves and glasses. Hit various compositions to protect wood from rotting on human skin can lead to unpleasant consequences. It is also necessary to use glasses - many substances evaporate quickly when room temperature. Getting them in the eyes can lead to very sad consequences.

Painting a garden bench

Important: after impregnation has been completed, it is necessary to varnish the bench. It is advisable to use a special varnish designed for outdoor use that can withstand temperature changes.

If painting with enamel or anything else is planned, it must be done immediately after impregnation. And only when a layer of paint has been applied should the wood be varnished.

You can make metal garden benches with your own hands, as well as forged ones. But this process is quite complicated; it requires specialized tools and skills. Wooden furniture has a very large number of advantages - it is very light, durable, strong, and also easy to repair (which is especially important). Making a garden bench out of wood with your own hands is very simple. There are many different drawings and manuals on the Internet.

If, sitting on a bench, you want to relax and be inspired, then it is more logical to place it near something beautiful: a pond, a flower garden or an alpine slide.

Making a garden bench with your own hands is not an easy task, but you don’t need to be a professional in wood carving or welding. It is enough to have some skills in working with a hammer, saw or welding machine, materials and desire.

Soon you will have comfortable and beautiful hand-made garden benches.

Having the desire and the necessary materials, building benches for the garden is not difficult.

Required materials and tools

With a creative approach, a garden bench can be made from almost anything. The best and simplest option is a wooden bench, for which the materials you will need are boards and varnish with a primer, and the tools you will need are a screwdriver and a jigsaw.

If you want to see a metal bench on your site, there will be a completely different set of tools: a welding machine, metal pipes, a pipe bending device, a grinding machine.

If there is none of the above, and the desire to see a bench on the site is great, you can use any available materials. Bricks or car tires with a board in the middle, wooden boxes can also serve as a bench. Even from plastic bottles and cardboard you can build a cute bench.

Step-by-step instructions for making a bench with your own hands

Wooden garden benches with backs

Most often there are two types of wooden benches made by hand: an ordinary bench and a bench with a back.

For convenience, before starting work, it is better to draw a drawing, choose the size you are interested in and buy boards that fit the size. If this is not possible, you need to use an electric jigsaw or saw and prepare the bench elements yourself.

Read about the types of perennial fast-growing shrubs for hedges.

You will need:

5 boards 1.5 m long and 15 cm wide, it is better to choose a thickness of 3-4 cm;
2 legs, which will also serve as a support for the back - 900 by 150 mm and thickness 3-4 cm;
2 front legs – 360 by 150mm with a thickness similar to the rear legs;
bars 40X40 mm;
screwdriver and screws;
varnish and impregnation;
electric jigsaw;
sandpaper.

The drawing will help you in making a garden bench

Having prepared all the necessary materials, you can get down to business.

Before fastening the boards together, they must be well processed so that relaxing on the bench will bring pleasure and not splinters. The longest boards that will go on the seat and back need to be sanded using sandpaper (or a sanding machine).

If the house has electric plane, you need to use it to make the shape of the boards round.

The blanks for the rear legs need to be modified to give them the correct shape.

The legs, which also double as a support for the backrest, are processed with a grinding machine.

We take boards 90 cm long and mark a division of 40 cm - the height of the bench. From this division we cut at an angle of 20 degrees top part boards with a jigsaw, and the board should stand on its edge. We get the back leg and the angle of inclination of our future back.

The most difficult and important is the cut; it must be even on both workpieces in size and depth.

We cut the beam to the width of the bench - 50 cm. We connect the legs with it, preferably both from above and from below, so the bench will be more stable. The distance between the legs is 28 cm (front and back).

We screw three long boards with self-tapping screws and a screwdriver to the upper beams of the finished legs, with which we tied them together.

Assembling the back of the bench. We attach the two remaining boards to the previously prepared cut. The distance between the seat and the board is 20 cm, the boards are 2-3 cm.

The structure can be strengthened. To do this, to lower harnesses legs, you need to attach a board along the length of the bench. This will give even more reliability and stability.

We coat the bench with varnish to make it decorative and durable.

Wooden garden benches without backrest

Similar to the steps described, you can make more a simple bench without backrest. For it we will need everything the same, except for 90cm boards going to the back legs, instead two more boards 36cm in length. It is assembled according to the same principle as a bench with a back.

Garden benches made of metal and wood

Making a bench from metal and wood is much more difficult than just making it from wood, but it is stronger and looks more solid.

You will need:

metal grinder;
welding machine;
bench vice;
metal pipes 30X30 mm;
primer for metal;
wooden boards for sitting and varnish, for processing.

Read about how to make a windmill from plastic bottles with your own hands.

Seat frame. We cut the pipe into 4 parts: 2 x 1500 mm, 2 x 400 mm. Weld in the shape of a rectangle.

Legs. Cut from metal pipes 4 identical pieces for legs 460 mm each and weld them using welding machine to the corners of the rectangular workpiece.

Bench back. 440 mm tubes are welded to a pipe 1500 mm long on the sides in one direction. This blank is then welded to the rectangular part of the bench.

The structure is ready, it needs to be rubbed down welding seams, polish and coat the bench with primer.

To add rigidity between the legs, additional metal ribs can be welded to the back (diagonally inside) and to the seat.

The bench made of wood and metal is ready

Seat. For the seat, it is preferable to use wooden boards, which must be treated with sandpaper before screwing.

They are attached lengthwise or crosswise, depending on your desire, using bolts (preferably with rounded heads).

IN metal frame Using an electric drill, holes are drilled into which the bolts are screwed. You can also use metal staples, then you won't need a drill.

Upon completion installation work, wood covering varnish.

Garden benches made of stone

Garden benches made of wood look beautiful, but they require careful maintenance. But stone benches are easy to maintain and easy to assemble.

If there are unattended stones on the site different sizes, from them you can build an almost exclusive shop.

We take large stones and lay out the seat and backrest from them. We lay out armrests from small stones. We put a few decorative pillows and you can sit down to rest.

Such benches are inconvenient to move around the site, but they look original.

Making a bench for the garden yourself

Description

Instructions for making a garden bench step by step, each step is described in detail and illustrated

Victor Sergeev

A garden bench is an indispensable attribute of relaxation, necessary at any summer cottage. It can be very simple (consist of one board with supports) or have an unusual shape and design, becoming part landscape design and yard decoration.

Since the construction does not require special skills, many owners prefer to do them themselves. If you also like to make crafts for your home and are planning to set up a recreation area in the garden or yard, we suggest you familiarize yourself with how to make a bench with your own hands using scrap materials.

Types of benches

Rest bench

The first criterion by which they differ is the ability to move them from place to place, that is, they are portable or stationary. There are also differences in the design of the benches; on this basis, the following types are distinguished:

Bench without back. This option is easy to implement, although not the most convenient to use.
Bench with a back (folding or regular). This design is classic and is used more often than others. It is especially convenient to have a bench with a folding backrest that can be lowered onto the seat when it rains, thereby keeping it dry.
Circular bench. It is usually arranged in the garden under shady trees. Due to the considerable seating area, circular benches are perfect for a large family or a group of friends.
Decorative bench (with flower beds, made from non-standard materials or unusual shape). The best solution to decorate the area - an unusually decorated bench. Another advantage is the ability to use a wide variety of materials (stumps, logs, wheels from an old cart, etc.).

When deciding on the type of bench, you need to take it into account functional purpose and, in accordance with this, select the structure and its location. For example, it is better to equip a bench for relaxation and privacy with a comfortable backrest and place it inside the garden or in another place from which it opens beautiful view. And near the entrance to the courtyard, you can limit yourself to a simple bench without a back; it is ideal for taking a short break from the road or putting the bags you brought on it.

Bench made of pine timber

Pine timber – excellent material for a bench

Pine is an inexpensive, easy-to-process type of wood, which explains its popularity. Let's look at how to make a bench from pine timber, using the example of a design with a back. Our bench will be spacious and will allow several adults to sit on it at the same time. To make it you will need a set of tools, which includes:

electric plane;
axe;
drill;
hacksaw;
screwdriver;
saw;
roulette.

The bench will rest on two connected pieces of timber, which in turn are attached to paw-shaped legs. The beams are filled with ribs that serve as the basis for the seat and back, and the top of this frame is sheathed with sanded boards.

The first step is to saw off two 1.7 m long pieces from the timber for the beams and two more 60 cm pieces for the legs. Next, the beams are placed in the center of the legs and secured with nails and special staples (they can be made independently from wire with a cross-section of 6 mm).

When the support is ready, you should cut off blanks for the ribs, 3-4 pieces for the seat and the same amount for the back will be enough. They need to be given an ergonomic shape using a hacksaw and an ax, then sanded. The ribs of the seat and backrest are connected to each other with 120 mm nails, tightened with staples and nailed to the supports. To extend the life of the wood, it is recommended to coat the frame with acrylic paint.

Finished design

While the frame of the bench dries, we cut bars 2 m long, 10-15 cm wide and 2 cm thick for the seat and back. The blanks will need to be processed with a plane and laid on the frame, secured with self-tapping screws. It is advisable to varnish the surface of the wood or treat it with a water-repellent compound. The resulting bench, despite its considerable weight, can be moved to any convenient place plot.

Bench made of oddly shaped driftwood

After uprooting old trees, the question arises - how to dispose of the remaining stumps and snags? It turns out that it is very easy to make a bench with your own hands from such waste. Thus, you will solve several problems at once - clear the yard of debris and get original garden furniture without spending practically anything except free time.

Bench made of driftwood

Driftwood is ideal for creating benches with a backrest. You just need to select curved branches of the desired size and diameter (at least 15 cm), clean them of bark and excess knots, and then sand them. The resulting blanks are connected into a single whole using nails or self-tapping screws. Then the structure needs to be treated with an antiseptic, varnished, and the unusual bench is ready.

Carved bench with armrests

carved garden furniture emphasizes good taste owners and creates a special atmosphere of comfort. Such benches are classic and will always look appropriate, both on the veranda and in the garden. Below we will tell you how to make a carved bench with your own hands.

The bench model in question is portable design, which features a comfortable backrest and armrests. Its sides will be decorated with figured slots, the back and seat can also be covered with carved patterns.

Drawing of a shop with dimensions

To make a bench you will need to prepare the following materials and tools:

boards;
PVA glue;
paint or yacht varnish;
screws;
milling machine;
drill and jigsaw;
screwdriver;
lathe.

All the details of the bench are first made of cardboard, and then, based on the templates, they are cut out of wood. Let's start with the sides. For them, you need to make 2 identical parts, designed to fasten the seat and backrest, in which holes are drilled in the center using the cutting thread method, forming a trefoil. The sides of the parts are decorated with semicircular recesses, and their bottom is decorated with a pattern that partially repeats the trefoil. All patterns are cut out with a jigsaw.

The supports that give the structure stability are made of timber at least 4 cm thick. The material should be processed with a milling machine and then sanded, moving precisely in the direction of the wood grain. The edges of the supports and sidewalls should also be milled.

For the seat and back, a thinner board is suitable (allowable thickness - from 2.5 cm, width - 18-20 cm). Optimal length The bench length for this design is approximately 1.2 m, so the boards should be the same length.

Design option for a carved bench

To assemble the bench you will need a leg, as well as armrests and stands for them. Fastening of the listed parts of the bench is carried out using bosses located at the ends of the parts (protrusions with a diameter of 2.5 cm), by aligning them with recesses on opposite fragments.

Now all that remains is to connect all the parts, gluing them with PVA and securing them with screws. Having assembled the bench, the surface is sanded with sandpaper and covered with two layers of varnish or painted.

Stationary bench made of gabions

A gabion bench is a reservoir made of metal mesh, filled with stones and equipped with a seat. You rarely see such structures in our area, but in Europe they are already quite popular and decorate the landscapes of many areas and squares. The unusual appearance is not the only advantage of gabions; they are also easy to implement and very inexpensive. We invite you to familiarize yourself with information on how to make a bench from gabions.

Gabions as a base for a garden bench

The filling for the gabion is usually stone - sandstone, diabase, limestone and other similar types. You need to choose a specific filler depending on your desired decorative properties, for example, limestone will make a light bench, diabase will add dark gray shades, and sandstone will make it brighter (red, green, yellow). If there is no need to save money, then it is better to choose stones that have already been hewn, since they are easier to lay than unprocessed ones.

The lattice box that will hold the stones should be purchased ready-made. Typically, for such benches, a mesh made of durable galvanized steel is used, and its individual fragments are connected to each other with special spirals (included in the kit).

The assembly sequence is as follows:

The parts of the box are laid out on the ground in the selected location.
The sides are connected to the bottom with spirals. This process is simple and does not require the use of additional tools.
The side parts are fastened together. For convenience, you can first lightly screw them with wire.
Stones or other decorative material are placed inside the resulting box.
The lid is secured to the structure with spirals.

Box assembly

To prevent the bench from sagging, it is advisable to strengthen the sides additional jumpers, attached to hooks or place a diaphragm inside. You can screw boards to the finished box or simply put a soft seat on top.

A simple bench made of unplaned boards

If the designs described above seem too complicated or such materials are not available, then you may be interested in how to make a bench with your own hands from an unplaned board. The model is very simple, but at the same time comfortable - a portable bench with a backrest.

The boards should be processed with a plane

The main material is unplaned boards, which should be pre-treated with an electric planer. Bench sizes may vary, but optimal height for her - 90 cm. Manufacturing begins with cutting out the rear legs. To do this, draw on a blank of suitable size curly leg benches and cut it out with a jigsaw. Then we trace the first leg on the next piece of board and cut out the second part.

The back and front legs are connected by a rectangular piece of board, the length of which is equal to the width of the bench seat. To securely fasten them, you will need to cut grooves in the parts of the legs. We proceed as follows - we cut through several parallel, closely spaced grooves, remove all excess with a chisel, so that grooves are formed. We place a rectangular fragment of the board in them and fix it with self-tapping screws.

We have two sidewalls that need to be connected cross bars(front and back), also mounted on screws. Now all that remains is to mount the seats and backrests onto the frame. The structure is almost ready, but before use it is recommended to varnish it, otherwise after 1-2 seasons the bench may begin to deteriorate.

Even a simple homemade bench can brighten up your yard.

Of course, novice craftsmen will hardly be able to do all the work perfectly at once. But don’t be upset if your bench doesn’t turn out as beautiful as in the picture. The main thing is that the design is reliable, and small flaws can always be hidden original design. Don’t be afraid to experiment and create something new, because making a bench with your own hands means adding a special flavor and comfort to your yard that the same type of factory products cannot provide.