How to make a box from plastic panels. How to make a pipe box in the bathroom. Jumpers for extra strength and hatch

A modern bathroom cannot be imagined without communications. But sewer and water pipes will not make the room attractive. Therefore, in the process of repair, the owners of apartments and houses hide these systems under the boxes. It is quite possible to perform such designs on your own, without the involvement of professionals. Just to get started, you need to select the material. To implement the described task, you can use one of several methods and perform the installation:

• boxes;
• furniture;
• roller blinds;
• pipes in the wall.

When choosing an option, it is worth considering the possibility of pipe maintenance. If they break, the decor of the room should not suffer. Once the box can be installed, you can mount a collapsible structure or make access doors.

A pipe box in the bathroom can be installed depending on the location of the lines. You can close only the pipes or the entire wall completely. The first option involves decorating individual sections, so it is possible to save on materials.

If you sew up the entire plane, then the room will look more attractive, but this design will reduce the usable area. You can use the space partially occupied by pipes by storing various things there.

Preparation of tools and materials

Like all other rooms in your home, the bathroom should look attractive. The pipe box in the room can be made of different materials - it can be drywall, plastic or wood. However, before starting work, you should take care of the availability of some tools, among them:

• roulette;
• hammer drill;
• construction knife;
• plumb;
• building corner;
• a hammer;
• bubble level.

To make the boxes, a standard sheet of drywall with dimensions of 2500x1200 mm will be quite enough. Thickness can range from 9 to 12.5 mm. It is better to purchase a moisture-resistant material, because the sewer riser and water pipes are covered with perspiration, so the humidity will be significant.

The frame can be made of square wooden bars with a side of 40 or 50 mm. An alternative solution is a galvanized profile designed to work with drywall. The latter option is more practical, because the profile does not require special training, and it is much easier to install it.

Material selection

Before you make a box for pipes in the bathroom, you should choose the material. It must be moisture resistant, have a small thickness and weight, and also be based on environmentally friendly ingredients that do not emit harmful substances into the atmosphere. According to these requirements, you can choose plywood, plastic, MDF or moisture-resistant drywall.

Conducting training

Before you install a piping box in your bathroom, you need to think about where problems will most often occur. Problems with the plumbing or sewerage system happen at the junctions. If you plan to install the box after laying the pipes, then you should make sure that the line has fewer connections.

If the replacement of the pipeline is not planned, then before hiding the pipes, it is necessary to inspect them. Without fear of leaks, you can close welded or soldered joints. As for the fittings, they should be freely accessible. They should be checked periodically. This indicates that threaded connections cannot be walled up. Access must also be guaranteed to valves, filters and meters.

Box making: sizing

The pipe box in the bathroom should be made only after its future dimensions have been determined. The distance from the walls of the box to the pipes should not be less than 3 cm. As soon as the markings on the floor have been made, using a plumb line, the contours of the future box can be transferred to the ceiling and walls.

Frame installation

Before backfilling the communication system, a frame should be installed. It is better to make it from a galvanized profile, because the air in the room will be constantly humid, so wood is not suitable. If the latter option is still preferable for you, then you should choose bars made of rocks that are resistant to decay. Before use, the elements are treated with an antiseptic.

The components of the frame are fastened together with self-tapping screws or cutters. To fix the profile to the wall, you can stock up on euro screws or dowels. The box covering the bathroom pipes must first be mounted on the walls. At the next stage, the racks are mounted, which will form the front face. Next, guides are installed on the floor and ceiling.

With racks longer than 1.5 m, jumpers should be made between them. They are required for a frame with a width of more than 0.25 m. A distance of no more than a meter must be left between the jumpers. How to make a pipe box in the bathroom so that it serves for many years? You must sand the cut with mastic if you are using wood. This will not only protect the material from damage, but also eliminate its deformation.

Frame sheathing

When preparing parts for the box, it is necessary to form whole elements. First, cut the side walls. They are cut so that the edges do not extend beyond the frame profile. Then the front part of the box is cut out, which should close the sidewalls. After cutting, the material is mounted to the racks. To do this, use 3.5 cm self-tapping screws. The step between them should be 2.5 cm. This will provide the frame with strength, so there is no need to fix the material to the jumpers.

For the manufacture of doors, you can use elements that will be fixed on magnets. Sometimes the box for pipes in the bathroom is completely collapsible. To do this, sheets of material are fastened with self-tapping screws at the very edge. The final finish does not involve decorating them, this is necessary if ceramic tiles are used at the final stage. In order to make the box complete, you can use a plinth or If it is necessary to dismantle the box, the plinth is removed, the screws are unscrewed, the finishing material is removed.

A pipe box in a drywall bathroom is the most common solution for decorating communications. For sheathing the frame, drywall should be prepared, the thickness of which will be 9.5 mm. The joints should be puttied, and then the surface is painted or lined with other material as desired.

Making a plastic box

The first thing to do before going to the bathroom is to close the pipes with a frame. This was discussed above. However, if you want to use polystyrene panels as the lining of the box, then the lining will be done a little differently. The advantage of this solution is the possibility of height adjustment of the structure.

The panels have legs, which allows you to level the unevenness of the floor. With the help of these legs, you can close irregularities up to 10 cm. The installation of the panels will look like this. An end support is mounted on the wall. The top and side edges must be smeared with glue and put in place. A wrench will allow you to tighten the legs of the panels. The plastic box for pipes in the bathroom is not only easy to install, but also durable and reliable.

Recommendations of a specialist for sheathing the frame of the box with PVC panels

After installing the starting profile, in order to avoid deformation, it is necessary to fix it with fleas on the guide profile. On the plastic panel, you need to measure the desired size, then cut it off with a sharp knife. In the start profile, the first panel is fixed, while the other is attached to the corner profile.

For connection it is necessary to use bugs or fleas. The second side of the box is assembled according to the same principle. On the last panel, you need to fix the start profile. Using silicone, you will ensure ease of dismantling when an emergency arises. In those places where it is necessary to provide unhindered access to the elements of the pipeline, it is necessary to cut revision holes. Special hatches are installed using silicone sealant.

Conclusion

Before making the box, you need to think about what material the frame will be made of. If you plan to use a profile, then you should purchase UD and CD guides. If you prefer wood, then to connect elements from it, it is better to purchase hardened self-tapping screws, the length of which will be twice the size of the timber used.

In each of these cases, to fix drywall sheets, it is better to stock up on hardened self-tapping screws, the dimensions of which are 35-45 mm. It is important to choose fasteners that have a piercing tip. It will be easier to work with it, and it will not damage the material.

Communications passing through the bathroom most often represent an unattractive sight. The simplest solution in this case may be to invite a master repairman. However, if you have the skills to work with the tool, you have an idea of ​​​​how to make a pipe box in the bathroom, then it is quite possible to do it on your own.

Moisture resistant drywall box

There is only one solution for ennobling communications - to close it with a decorative box. Occasionally, when the piping is dispersed over the surface of the wall, it is possible to use a false wall. In most apartments, the layouts are not particularly spacious. When the risers are located in the corners or in the case of a compact localization of the wiring, the best solution would be to use a bathroom box. So you can get the most compact arrangement, creating the illusion of a more spacious room.

Sewer and water pipes without a box look unaesthetic

There are two more questions that need to be resolved before starting work - what can a bath box be made of and what size should it be. The main requirement for materials is resistance to high humidity:

• Moisture resistant drywall;
• PVC wall panels;
• Plastic box-channel.

Pipes hidden in a drywall box

The pipes are hidden under the frame for the PVC panels

Pipes in a plastic duct

As for the dimensions of the bath box, they should be determined by the principle of reasonable expediency. Pipes should be completely covered with decorative walls with a small margin. The size of the internal empty space should provide, if repair is necessary, the possibility of access through a removable hatch to key components (revisions, places for installing gaskets, threaded connections of pipelines).

Pipe box with inspection door

Disadvantages of drywall

The do-it-yourself box in the bathroom is most often made of moisture-resistant drywall. This is due to the low cost, availability and ease of processing of the material. Moisture-resistant paints or tiles can be used to finish the assembled structure.

When purchasing material, you should pay attention to the color of the sheet - moisture-resistant drywall has a green outer paper layer.

The main disadvantage that should be taken into account is the relatively low mechanical strength. When making a box in the bathroom, a drywall sheet is easy enough to accidentally break. In addition, the resistance of the material to prolonged exposure to moisture is quite limited. Only the outer paper layer is impregnated with protective compounds. When cutting a large sheet, the resulting edges will be exposed.

Appearance of moisture resistant drywall

The most critical is the formation of puddles on the floor near the wall of the box under the bathroom. In this case, quite a long time may elapse from the moment water appears to detection. Moisture can seep inside through the micro-slits at the junction of the box wall to the floor. When installing the box in the bathroom, you can protect the bottom edge of the drywall sheet from getting wet with a strip of silicone sealant.

What tools and materials will be needed for work

The implementation of a decorative box for a bath is not the most difficult, but still quite a laborious process. In addition to drywall itself, you will need a number of auxiliary materials:

• Metal galvanized profiles - a frame is assembled from them;
• Fasteners - self-tapping screws and dowel-nails for connecting the elements of the supporting structure, attaching it to the surface of the floor and walls, fixing drywall sheets;
• Silicone sealant - for processing junctions with the floor;
• Serpyanka and putty - they are necessary for masking the heads of self-tapping screws and sealing the joints of sheets (used when preparing the surface of the bathroom box for painting);
• Inspection hatch - for maintenance.

Assembling a frame from a metal profile

The set of tools that will be needed to perform the work is not so big. It is quite possible to get by with the necessary minimum, consisting of a screwdriver with a set of bits, a puncher, a construction knife and metal shears.

Necessary tools for making a box

Carcass execution

Work begins with marking the walls, floor, and, if necessary, the ceiling. The size and location of the lines will reflect the position of the walls of the box. To prevent distortions of the frame, the markup should be checked by level. Situations should be avoided when the walls of the drywall box in the bathroom will interfere with the opening of the furniture door or the front door.

The components of the frame are mounted according to the level

If all the rules are followed, and the markup is done correctly, you can start assembling the box frame for the bath. Metal profiles are cut into the required size with metal scissors. First, the segments are attached to the floor and walls - they create reference points for attaching the frame. Then, the installation of vertical racks of the supporting frame of the box under the bath is carried out. The assembly is completed by the installation of the upper guide, which combines all the elements into a single rigid structure. For maintenance of metering devices and sewer inspection, auxiliary guides are installed. In the future, they will serve as the basis on which the revision hatch will be attached.

The frame is assembled from metal guides

The profiles are connected to each other using self-tapping screws (“seeds”). On the surface of the metal, a notch is made to prevent the tip of the screw from slipping. Resting on these recesses, you can easily install fasteners.

Assembling the frame

A frame is assembled around pipes laid on the floor

In the frame, it is necessary to provide places for passing pipes

Frame sheathing

Standard sheets of drywall are cut into the required, pre-calculated size. It's a fairly simple process:

• The sheet is laid on a flat surface (in extreme cases, cutting in a vertical or slightly inclined position is allowed);
• Using a tape measure, the required size is measured and small risks are made on the surface with a knife;
• A metal ruler or an even long wooden lath is superimposed on the marks obtained;
• A construction knife makes an incision along the guide;
• Drywall breaks off along the received line;
• The resulting edge, if necessary, is trimmed with a knife.

The frame is sheathed with drywall

Cut sheets of drywall are attached to the frame with self-tapping screws. The sheet is pressed tightly, the screw is screwed first into the sheet, and then into the metal profile. As a result, the entire frame area (with the exception of the space provided for the hatch) must be sewn up. To facilitate puttying, the fastener caps must be sunk when screwing. To avoid cracking at the edges, fastening must be done with a small indent (2-3 cm).

Checking all elements for evenness

We use mineral wool for soundproofing

Finished frame

Finishing preparation

In order to protect the material of the bathroom box from water, all joints and junctions are treated with a sealant. It is best to use silicone with fungicide additives to prevent mold growth. Particularly careful sealing of the junctions should be carried out for the box under the bathroom, where access will be difficult.

Surface preparation before tiling is limited to treatment with a primer solution. The entire area of ​​the box under the bathroom and along the walls in the open space is covered with a working composition with a brush or roller. Perforated corners are fixed to the inner and outer corners, and then the tiles are glued using specialized compounds. It can be both dry mixes that need to be diluted with water, and mastics ready for use. Sometimes, to save consumables, the box under the bathroom is covered with paint instead of tiles. Preparation for this type of work consists in gluing with a sickle the junctions of individual sheets. A leveling layer of putty is applied over the reinforcing tape and recessed fastener heads.

At the end of the finishing, an inspection hatch is installed. Its installation is carried out using standard mounting tabs. It is necessary that the hatch coincides in size with the hole left under it, and its size is sufficient for servicing.

Tiled plasterboard box with hatch

The use of finished polymer products

The pipe box in the bathroom can be assembled using plastic materials - finishing wall panels and channels. In the first case, the sequence of work is almost identical to that already considered - the frame is assembled and its sheathing is performed. Installation of plastic panels is carried out using building adhesives "liquid nails". To make the whole structure look neat, the joints and corners are masked with decorative strips. The inspection hatch is installed in its seat in the bathroom box, fixed with fastening tabs to the surface of the panel profiles.

A good solution is to use standard plastic channels to make a bathroom box in which you can hide the piping. For this purpose, both specialized products and air duct elements are used. The advantage of this method is the absence of the need to perform additional operations (frame assembly, material cutting, finishing). It is enough to choose a plastic box suitable for the color of the bathroom for pipes of the required dimensions and fix them on the wall using a perforator.

Difficulties arise when it is necessary to cover the sewer riser. It can be quite difficult to find shaped parts from which it is possible to make a box for a bathtub for pipes of the desired size. Another point to consider is the installation of metering devices. It will have to be done either open or using a plastic box.

Regardless of what material is chosen for the manufacture of the box, all operations (cutting, installation, finishing) must be performed carefully. Otherwise, there is no point in taking it on, there is no point in doing the work - the best option would be to invite a hired craftsman.

Pipes are hidden in a box of PVC panels

Pipes in the bathroom always interfere with the perception of its interior. In some cases, there is no other way out than to make a pipe box in the bathroom to hide unaesthetic details of the situation. But this method of solving the problem has its own characteristics, which it is desirable to keep in mind.

How to choose the right materials?

It is technically easy to make a box in the bathroom with your own hands, but you should take into account the features of this room. High humidity and possible splashes on the walls dictate the owner to give preference to moisture-resistant materials. These include:

• moisture resistant drywall;

  Moisture resistant drywall

• plastic panels;

  Plastic panels

• special types of plywood.

  Plywood moisture resistant

With a low ability to absorb moisture, sheet materials are easy to cut and process. They can be decorated to match the overall design of the bathroom by painting, tiling or plastering as needed.

It is required to fix the sheet material on the frame, therefore, in addition to plasterboard or other sheets, you must also select the material for the guides. It is most convenient to use ready-made profiles for the installation of drywall. These are metal structures, strong and light at the same time. They are easy to cut and attach to each other and walls. Installation of sheet material is carried out by means of self-tapping screws.

An alternative to profiles can be a wooden block. Planks 3-5 cm thick do not make the structure heavier and are easily connected with self-tapping screws. Their only drawback may be their susceptibility to rot when exposed to moist bathroom air.

How to prepare a workplace?

Before you make a box in the bathroom with your own hands, you need to determine whether it will close the communications directly or capture the entire adjacent wall. In each individual case, either option may seem preferable. Each of them has its own characteristics:

1. If you hide the entire wall under the panels of the box, on which the ugly pipe is located, then nothing will interfere with any design decision. A neat, even false wall can be finished as you like. But the method also has a drawback: the panels are located at a distance of about 20 cm from the bathroom wall. It is by this amount that the length or width of the room will decrease. In small apartments, this can be significant.

   Frame for false wall

2. By covering only that part of the wall where communications pass with a box, you can save some space in the bathroom. But the box will remain an eye-catching and interfering interior detail.

For a radical solution to the issue, some place in the space behind the panels a whole system of storage for the right things. Such a pipe bathroom box turns into a kind of rack with doors.

How to make a box of drywall, panels, plywood or other material is a personal matter for each owner. In order to imagine the possibilities of each of the methods, you must first draw a sketch and draw a rough plan of the situation in the bathroom from it. According to the drawings, the amount of necessary materials is also calculated, taking into account the height of the room, the width of the box and the presence of additional parts in it.

After that, you can proceed to the procurement and preparation of everything you need, you will need the following tools and materials:

• profiles (bar);
• self-tapping screws for connecting and fastening sheets or panels;
• dowels for fastening the profile to a concrete wall;
• perforator with nozzles for drilling concrete and metal, with a screwdriver;
• hacksaw for wood or metal, depending on the material of the frame;
• plumb, level, tape measure.

Before starting the installation of the box in the pipe bathroom, it is necessary to find out the condition of the communications. In a closed space, any minor leak may go unnoticed for some time until an emergency occurs. Due to an unnoticed defect, a bathroom repair may be required later, so it is best to identify the problem in time and fix it.

Marking the frame for the box

Most often, sewerage and water supply risers are located side by side and run vertically in one of the corners. Therefore, marking the place under the box in the bathroom with your own hands should start from the ceiling. This will make it possible in the future to lower the exact vertical to the floor and make the planes perfectly flat.

If you plan to sew up the entire wall with panels, then near the pipes in the bathroom with your own hands you need to measure the depth of the space between the wall and the location of the profile for the plasterboard or bar. In this case, it must be taken into account that the guide must be at least 5 cm away from the communications. Remember the distance found in order to make a mark in the opposite corner. Connect the dots with a straight line across the ceiling.

At two arbitrarily chosen points on this line, lower the plumb line to the floor. Put labels corresponding to the points selected on the ceiling. Draw a straight line through them on the floor.

It is desirable to perform the same algorithm of actions if the pipes run horizontally. Accurate marking will help to make the frame for the box in the bathroom very neatly and without distortions. In this case, the line on the ceiling will not be needed, so it is better not to draw it, but to put marks near opposite walls. When lowering the plumb line, it will be necessary to mark the points of the front face of the box on the floor, and the junction of its edge to the walls - on them. In this case, the height of the box is determined depending on the height of the pipes above the floor, taking into account a gap of 5-7 cm.

horizontal box

In order to mark the frame of a vertical drywall corner box in the bathroom, you will have to act a little differently:

• set aside along the ceiling the distance from one of the adjacent walls parallel to the neighboring one, taking into account the gaps of 5-7 cm from the pipes to the guides;
• do the same from the adjacent wall, at the intersection of the lines put a point from which the plumb line will be lowered;
• use this tool to mark the projections of 3 points (connections to walls and intersection of lines) on the floor.

It is quite simple to draw an angle according to the marked marks. You need to connect the junction point with the intersection point and repeat this from the adjacent wall. The resulting rectangle will be identical to the one drawn on the ceiling.

Frame installation

The marked lines indicate the location of the inner edge of the profile. Cut the material to the measured lengths of the sides of the box that will serve as the pipe box in the drywall bathroom. Attach profiles to the ceiling, floor and walls with dowels in pre-drilled holes. The slats of the frame must be aligned according to the markup and additionally check their verticality and horizontality, eliminating defects.

Profile fixing

The location of rigidly fixed parts will be different:

1. For a fully wired wall, horizontal rails are installed on the ceiling and floor. Then 2 verticals are attached between them on opposite walls. If it is necessary to build shelves inside this space, it will be necessary to additionally install profiles on the wall to be closed.
2. If a horizontal box is made in the bathroom, you need to strengthen the planks on the floor, on the wall above the pipe and adjacent walls (vertically and horizontally) with your own hands.
3. Do-it-yourself vertical frame for a box in the bathroom is assembled from racks on adjacent walls and squares on the ceiling and floor.

After the parts adjacent to the walls and ceilings are fixed, you can install connecting elements that form an angle or plane. At the same time, for a vertical box, the same front post is installed, for a horizontal one, it is fixed in the appropriate position. On a completely wired wall without internal space equipment, you will need to put several verticals with a step that will allow you to attach the panels used (gypsum board, plastic or plywood) along the edges and in the center.

To ensure structural rigidity, crossbars are placed connecting long parallel profiles. Their location depends on the orientation of the box itself. In any case, the orientation of the crossbars must be perpendicular to the main rails.

Box cladding

Depending on the location of the pipe box in the bathroom, the installation of the cladding will differ in each case. This is dictated by the nuances of joining panels made of plasterboard or plywood. The assembly of plastic parts is carried out according to its own, special technology.

To mount sheet materials on a do-it-yourself frame, you should cut them according to the measurements taken from it - this is the length and width of each flat part. To make a drywall box in the bathroom, it is advisable to use whole sheets so that there are as few joints as possible.

If the pipes have a fitting connection, a faucet or other place of possible leakage, then a convenient hole should be provided in the wall of the drywall box. It will give access to a responsible place. In order to close it, a small secret door can be made. It is desirable to install additional crossbars along the edges of the hole.

Hole in the box

GKL or plywood are attached to a completely sewn wall in the same way as with normal alignment: the fasteners are screwed in at the corners of the sheet, along the edges in increments of about 20 cm and in the center. In this case, the joint of adjacent sheets necessarily falls on the profile bar. The heads of the screws must be sunk into the material so that they are not visible after finishing.

When sheathing a vertical frame that covers only pipes, first mount the side parts that make up the box in the bathroom of drywall or plywood. The measurement and cutting must be done so that the outer edges match perfectly with the corner of the profile. If necessary, they can be cut flush with the corresponding plane with a sharp knife.

The front panel must be cut out so that it covers the edges of the side sheets. You can attach the GKL to the frame with special short self-tapping screws, using a screwdriver nozzle for this purpose.

With a horizontal pipe in the bathroom, you must first screw the vertical, front panel onto the frame. After that, set the horizontal one so that it overlaps the edge of the previous one. Such a measure will make the drywall pipe box less vulnerable to splashes when taking a shower and other hygiene procedures. You can tile plasterboard or plywood with tiles. The tile will reliably protect the material.

Plastic panels as cladding

Making a plastic box for pipes in the bathroom is much easier. Lightweight moisture resistant material does not require additional protection.

plastic box

To close the pipes in the bathroom, a box of panels can be done like this:

• install the starting profile on the guides, fastening - self-tapping screws;
• measure and cut the panel, insert it into the profile, fix it with screws;
• glue or screw the adjacent element to the corner profile and connect it to the installed PVC panel;
• attach the profile to the frame and assemble the other side.

In construction companies, you can purchase a hatch for PVC panels. It will be required if it is necessary to make an inspection hole in the panel.

Currently, trade organizations also offer XPS panels that do not need to install a frame. They are fastened by means of an end plate installed on the ceiling and threaded legs, which raise and fix the panel.

Video instruction

You can't do without communication systems in the bathroom. However, water and sewer pipes are unlikely to give your room an aesthetic appearance. Therefore, most residents, in the process of repair, try to hide all communications. To implement the plan, there are several ways: hide the pipes with furniture, boxes, shutters or wall them up in the wall. When choosing a masking option, it is worth considering the possibility of maintaining communications. So that in the event of a breakdown, you do not have to break the decor of the room. By installing a pipe box in the bathroom, you can make a collapsible structure or build small doors for access to communications.

Depending on the location of the mains, the box can be installed in two ways: closing only the pipes or the entire wall on which they are located. In the first option, by closing only those areas where there are pipes, you save on material. Sewing the entire plane on which the highways are located looks more aesthetically pleasing, but reduces the usable area of ​​​​the bathroom. In order to somehow use the space in the box not occupied by pipes, small storage facilities are built there for various things.

What is the best box to make?

Before closing unsightly communications, it is necessary to choose the right material for the box, behind which pipes in the bathroom will be hidden. It must meet several requirements:

• be sufficiently resistant to moisture;
• have a small weight and thickness;
• made from environmentally friendly ingredients that do not emit harmful substances.

According to these criteria, from commercially available materials for the manufacture of a box in the bathroom, you can use: MDF, moisture-resistant plywood, moisture-resistant drywall or plastic.

Preparatory stage

Most often, problems with the pipeline occur at the junctions. Therefore, the fewer, the better. If the box is installed after laying new pipes, care must be taken to ensure that the line has as few connections as possible. If the replacement of the pipeline is not included in your plans, before hiding the pipes in the bathroom, it is necessary to conduct a thorough inspection of them. Inspect all lines for defects and, if any, eliminate them.

It is believed that without fear of leaks, soldered and welded joints can be closed. But fittings with threaded connections should have free access. They need to be checked periodically. Therefore, threaded connections cannot be walled up. It is also necessary to provide free access to valves, sewer revisions, meters, filters.

Making a box step by step

Installation of the box in the bathroom consists of several stages. Let's consider each of them in more detail.

Measuring and sizing a structure

Before sealing the pipes, it is necessary to make the necessary measurements and clarify the location of the box. In places of unreliable connections, to meters and valves, it is necessary to provide a removable part or a door. A floor plan on a scale will not interfere, on which all structural details will be marked. In the process of measuring, do not forget about the thickness of the finishing material.

Having determined the contour of the future structure on the floor, with the help of a plumb line they transfer it to the ceiling, and then make markings on the walls.

Mounting the frame for subsequent sheathing

Before sewing communications into the box, it is necessary to install a frame around the pipes. It is best to make it from a galvanized profile. Since the air in the bathroom is constantly humid, the use of wooden blocks is undesirable. If you still decide to use them, choose bars made of decay-resistant rocks. And before use, treat all wooden parts with an antiseptic.

The adhesion of the frame elements to each other is carried out with self-tapping screws or with the help of a cutter. To fix the profile to the wall, dowels and euro screws are used.

It is necessary to mount the profiles to the wall, taking into account that the finishing material subsequently does not adhere closely to the pipes

The first step is to mount the profile on the walls. Then install the racks forming the front face.

Depending on the design of the future box, there may be several or only one A-pillars. They are attached using their own curved edge or suspensions.

After that, the guides are mounted on the ceiling and floor.

It is convenient to fasten vertical and horizontal profiles to each other using a cutter

If the length of the racks is more than 1.5 m, it is necessary to make jumpers between them. They will also be needed for a frame whose width is more than 0.25 m. The distance between the jumpers is made no more than a meter.

For structural strength, jumpers are attached to racks with a height of more than 1.5 m

When using a wooden frame, treat the cut points with building mastic. This will protect the box from damage and prevent its deformation during temperature and humidity fluctuations.

Sheathing the frame of the box with sheet material

When cutting out the details for the box, try to make whole elements, and not from pieces. First, cut the side pieces. They are cut in such a way that the edges do not protrude beyond the frame profiles, but are flush with them. After that, cut out the front of the box. It should cover the side elements.

After cutting the material, it is mounted to the racks. Do it with self-tapping screws (3.5-4.5 cm). The distance between them should be no more than 2.5 cm. Such a box will have sufficient strength, so it is not necessary to attach the material to the jumpers. To control the weak points of the pipeline, inspection holes with doors are left.

An opening must be left in the box for free access to valves, meters and filters. It can be buried with a door purchased from a hardware store.

You can build them yourself or buy ready-made ones. For the hand-made manufacture of access points to pipes, a door is made from the material that is used for the box itself. So that it does not open, furniture magnets are fixed on them.

The door for the control hole can be finished with the same material as the entire box. So it will be less noticeable

You can make a fully collapsible box. To do this, sheets of finishing material are attached to the screws to the very edge. Making the final finish, they are not covered with tiles.

Finally, plastic corners or a plinth are fixed. When it will be necessary to dismantle the box, remove the plinth, unscrew the screws and remove the finishing material.

Self-tapping screws, closed with a plastic corner, are easily unscrewed to dismantle the box in case of emergency. After that, the box remains intact and can be mounted in place

Final decorative finish

The final stage of the installation of the box is its finishing. It depends on the material from which the structure is made. Plywood, drywall and MDF can be tiled or painted. Plastic panels do not need further finishing. They look pretty attractive on their own. Unlike drywall, plastic does not reduce the area of ​​\u200b\u200bthe room.

To decorate the bath, a frame is constructed from a profile

In the same way, the pipes are closed under the bath itself. First, the frame is mounted, and then it is sheathed, leaving the control doors.

Moisture-resistant drywall is mounted on top of the frame from the profile and tiles are mounted on it. Be sure to leave a door for pipe maintenance

Now knowing how to mount the box, you can decorate any pipes in the bathroom and make the room more attractive from an aesthetic point of view. Hiding communications in the bathroom improves the design of the room. In addition, after closing the pipes with a box, the noise level emanating from them is reduced.

Video example of these finishing works

Pipes left in plain sight are not the best addition to the bathroom interior. In order for the room to have a neat and complete look, communications must be hidden. Moreover, it is desirable to do this in such a way as to have access to pipe connections, valves, meters and filters. The best solution to this problem would be the manufacture of a box. Consider how to make a pipe box in the bathroom from plastic panels.

Advantages of a plastic box

The design for masking pipes can be made of plastic or drywall. Each of these options is good in its own way, but in terms of practicality, the plastic box is in the lead. It has many undeniable advantages:

• Possibility of quick disassembly without damaging the material. This property of plastic construction is especially relevant for pipes joined with fittings and threaded connections, which are not immune from leaks. After the liquidation of a breakdown or scheduled maintenance of the pipes, the box is easily assembled back.
• No need for further finishing. Plastic panels themselves are already a finishing decorative material, unlike drywall, which requires final processing.

• Deformation resistance and ease of repair. The plastic used to make the panels is strong and flexible, so it's less likely to break than tiles that can be accidentally broken. Even if one panel is damaged, it is easy to replace it with a new one without damaging the entire structure.
• Moisture resistance. PVC is not afraid of water, does not rot, nothing will happen to the box, even if it is installed close to the bathtub or gets wet due to condensate that forms on the pipes.
• Ease of installation. Installation of the box will take only a few hours and will not require the use of expensive or specific tools.
• Affordable price. Plastic panels for bathrooms are one of the most inexpensive finishing materials.
• Spaciousness and compactness. Due to the small thickness of the panels, the plastic construction is very roomy and does not take up much extra space in the bathroom, which is especially important for a small room.

The plastic box is very practical: it can be disassembled and reassembled as many times as necessary.

Preparatory work

Before proceeding with the assembly of the box, you need to carry out several preliminary activities.

• Examine all the pipes that will be hidden. Eliminate defects while communications are in sight. If a new pipeline is being installed along the way, try to keep the number of connections to a minimum.

• Decide what kind of box in the bathroom will have. It can hide only a small area where the pipes pass, or take up a fairly large area. The advantage of the first option is to save material and no need to sacrifice free space. When choosing a more voluminous modification, additional space inside the structure can be adapted for storing things.

Tip: if you are going to lay out the walls with tiles, it will be more convenient to make a box first. It will hide part of the floor, and you won't have to lay tiles in this place.

• Take the necessary measurements and make a drawing of the box. At this stage, provide such important additional elements as hatches for access to meters, valves and unreliable connections.
• Calculate the amount of material needed with a small margin.

It will be more convenient to dock the panels horizontally. In the vertical version, to ensure the rigidity of the structure, it will be necessary to mount additional transverse frame bars every 40 cm.

Necessary materials

To make a plastic box you will need:

• metal profiles for UD and CD frame;
• polymer panels;

• silicone sealant;
• plinths made of PVC for masking joints;
• revision hatches-doors;
• self-tapping screws;
• sharp construction knife.

Making a box frame

Follow the instructions below when installing the frame structure.

• On the walls adjacent to the corner, install guides (UD profiles) that will set the dimensions of the box. Don't forget to use the level. To fasten the supporting profiles to the wall, use euro screws and dowels. If the surface is tiled, you can take metal screws 2.5 centimeters long and 3.5 millimeters in diameter. They are twisted into the seams between the tiles.

Tip: To save space in the bathroom, install the profiles closer to the pipes. The minimum distance is 3 centimeters.

• If the pipes run horizontally, place the profile parallel to the floor and fix it on it.
• Start forming the outer corner. From two UD profiles, twist the corner post. Direct their shelves in different directions at a right angle and connect them with small screws - “fleas”.

• Cut the carrier profile CD into pieces, the length of which will correspond to the dimensions of the structure. Fasten the corner stiffener to the wall. Insert the finished pieces of the profile with one end into the guide installed at the first stage, with the other into the stiffener. Thus, both parts of the corner are connected to the profile.
• Every 50 centimeters, add jumpers, which are necessary for the subsequent fastening of PVC panels.
• The second corner profile is attached in a similar way to another wall.

We sheathe the frame with PVC panels

After the supporting structure is ready, you can proceed to its sheathing. You need to do this in the following sequence:

• Install the start profile. Carefully, avoiding deformation, fix it with the help of "fleas" on the installed rail.
• Measure a strip of plastic panel to the desired length, cut it with a sharp knife.
• Fix one panel in the starting profile, attach the second to the corner profile and install it to the other plane of the box. To connect, use all the same "fleas", or "bugs".
• Assemble the other side of the box in the same way. Fix the starting profile on the last plastic panel, then fix it. If you do this with silicone, you can ensure that you can easily dismantle it in the future in case of an emergency.
• Cut inspection holes in those places where you need unhindered access to important pipeline elements: taps, meters and joints. Using silicone sealant, fix special hatches in the holes.

• The last step will be the installation of plastic skirting boards at the joints of the panels with each other, as well as with the floor, walls and ceiling.

The piping box in the bathroom is ready. With the right color of the panels, it looks neat and harmonious even in combination with tiled finishes.

Major repairs in dwellings often involve replacing pipes. Upon completion of the installation of pipes or radiators, it becomes necessary to hide communications to create a favorable appearance of the walls in the bathroom, toilet or in any other room. A lot of work done during the renovation period with the use of expensive tiles, underfloor heating and attractive plumbing fixtures, and a lot of effort put into creating a pleasant interior, can be in vain if communication disguise is not thought through.

Various materials are used for such work, but the most acceptable is the use of drywall, from which the box is made. Why the choice falls on drywall?

The advantages of a drywall box for pipe sheathing are due to the following:

• affordability of drywall;
• ease of manufacture of plasterboard structures.
• environmental safety of drywall, characterized by the absence of harmful substances in its composition. This is especially true in the manufacture of boxes for batteries and heating pipes that emit heat during space heating.

Some information about drywall. This popular building material is characterized by a multilayer structure with alternating gypsum and paper layers. Drywall sheets are on sale in the size of 2.5 by 1.2 meters. One sheet of drywall will be enough to make a box for a fan riser.

Note! For the construction of the box in rooms with high humidity, such as a bathroom and toilet, a moisture-resistant type of drywall should be used.

wood or metal

First of all, you need to assemble the frame. For the manufacture of the box, both a metal profile and a wooden bar can be used. The advantages of a metal profile made of galvanized steel is that, unlike a wooden beam, it has increased resistance to moisture and is not exposed to rust for a long time.

The advantages of a wooden frame include the environmental friendliness of wood and a higher degree of sound insulation.

Materials and tools

Before proceeding with the manufacture of the box, you should consider a set of tools and materials.

Materials and tools:

• sheet drywall;
• metal profile (guide and rack);
• dowel-nails, self-tapping screws for fastening parts of the box;
• special knife for cutting drywall.

You will need materials such as mounting foam, cushioning tape, putty to level the surface of the box. Of the tools, a drill, hammer, screwdriver, tape measure, level, plumb line, pencil are useful.

Preliminary work

The preparatory work includes the processing of steel heating pipes and radiators (heating radiators), from which the old paint is removed and, if necessary, a new one is applied. Paint as an insulating material will protect metal pipes from premature rust damage. These works must be completed before installing the box, which will subsequently block access to the pipes.

The above work will not be required if the manufactured box is used for sheathing plastic water pipes.

Note! It is possible to continue work on installing the box only after the final drying of the paint on pipes or batteries.

Frame assembly and cladding

A drywall box is fixed to a power metal frame with vertical and horizontal profile elements.

Note! When alternating horizontal elements, a step of 60 cm must be observed.

The finished frame is sheathed with sheets and strips of drywall, pre-cut to fit the dimensions of the frame. Drywall parts are fixed to the profiles with self-tapping screws. They are screwed into the drywall with a slight recess so that they can be hidden under a layer of plaster.

There are several ways to close the pipes with drywall:

1. Carry out the "preservation" of the pipeline of the fan riser: remove rust from pipes, replace damaged pipeline sections, prime or paint pipes, repair joints between pipe sections.

2. Start work on installing the cladding box should be from the bottom. This means that marking the dimensions of the box, taking into account its contours, should be applied by drawing straight lines using a corner, starting directly from the floor surface - to the left and right of the pipe. Sections of profiles of the required length are fixed horizontally with dowels along the lines drawn on the floor. Similarly, horizontal profiles are installed on the ceiling (or elsewhere on top of the future box). Vertical profiles are attached to the installed horizontal ones. Next, the remaining horizontal profile elements are added in increments of 60 cm.

Note! Vertical profile elements are attached to horizontal rails using special self-tapping bugs.

3. Cutting blanks from drywall is carried out after the final installation of the frame from the profiles. Drywall is cut with a special knife, often used for cutting wallpaper. On the front side of the drywall sheet, lines are drawn for the external dimensions of the individual sides of the box from the profiles. Furrows are applied along these lines with a knife - alternately for each workpiece. The notched drywall blank is simply broken and then cut from the back of the drywall sheet.

Note! Plasterboard blanks are fixed to the box frame using ordinary metal screws.

4. Arrangement of a window (vent) in a drywall box opposite the fitting (faucets and connecting devices on pipelines). The need for such a window is obvious - during operation, regular revision and repair of the sewer system is necessary.

Only after you learn how to close the pipes with drywall, and do all the work on installing the box, you can start finishing work. They may include applying plaster to the surface of the box and then painting it, or lining the box with ceramic tiles.

Video

An example of making a pipe box:

A photo

In the toilet of an apartment in a multi-storey building, there are sewerage and water supply pipes. Their appearance usually spoils the interior, so it is important to successfully hide them. Next, we will consider how to build a drywall pipe box, and what effective methods of mounting the frame and exterior finish exist.

Advantages

The riser pipes usually pass through all floors, from them there are sewerage and water pipes for each apartment in the bathroom. They do not look very aesthetically pleasing, in addition, they serve as a source of additional noise when draining, and condensation can also accumulate on them. In any case, all apartment owners who care about the interior are trying to close them. In new houses, upon delivery, there is often already some kind of partition, but its quality usually leaves much to be desired, so the most successful option is to make a strong and beautiful box in the toilet with your own hands.

The pipe box in a combined or separate bathroom should not be completely closed, since water meters are usually placed in this place, in addition, you must always have access to the riser in case of leaks. Therefore, home-made options can be removable or with a neat built-in door.

Making a drywall pipe box is very effective because it is lightweight, relatively cheap and easy to process. It is attached to a frame made of metal profiles with screws or self-tapping screws for metal. For such a wet room as a bathroom, it is worth taking moisture-resistant grades of drywall. The advantage of this material lies in the fact that after installation it can be decoratively lined with any means: putty, moisture-resistant paint, ceramic tiles, PVC panels. Often they try to finish the drywall box in the same style with the walls, so the most successful toilet interior is obtained.

A competent owner can make a metal frame and plasterboard partitions in almost one day. To do this, you need a minimum of materials and a small set of tools.

Options

Depending on the location of the riser pipes in the bathroom, such a box can be:

• solid partition;
• a separate closet in the corner;
• protruding from the wall.

The first option is relevant when all communications in the toilet are located behind the toilet near the rear load-bearing wall. It is very simple to make it, since it only requires the installation of a frame from a profile and the fastening of one continuous sheet of drywall. But in this case, more material may be required, and this method takes up a lot of space from an already small toilet room.

If the sewerage and water supply pipes are located in the corner of the toilet, a neat corner box is made. The guide profiles go from the floor to the ceiling, stiffening ribs are attached between them, the entire frame is sheathed with drywall and then proceed to its decorative finish. The box will have the shape of the letter G. Before sheathing, you need to take care of the door, which provides convenient access to the riser. It is quite easy to make a similar shape of the box due to the fact that it will be closed by load-bearing walls from the back side, its advantage is also that it takes up a minimum of space in the bathroom.

If the sewer pipes are not located in the corner of the room, but you need to save space, you can make a U-shaped box. The installation of the frame for it will be more laborious, it will be necessary to make more cuts of the metal profile, but after carefully carried out work, such a cabinet will look very elegant.

The issue of access to pipes and water meters during the construction of such partitions is very relevant. The box can be made removable, then, if necessary, the entire structure is removed entirely. The advantages of this method are that at any time convenient access to the entire riser from floor to ceiling can be made, but this design will be very cumbersome, and it is quite difficult to remove the box from metal profiles and drywall. Therefore, usually removable boxes in the bathroom are made of plastic, PVC and other lighter materials.

A much more common method of accessing a riser in a box is by installing a door. In the frame, a rectangular frame is made from the profile - it will serve as a hole to easily get inside.

Doors can be made from the same drywall, plastic, PVC, plywood or other available materials. They can be single-leaf and double-leaf, removable or hinged. For convenient closing, they can be made with locks, a latch, on magnets. Competently mounted doors, matching the finish with the box and walls of the toilet, look very nice.

There are a lot of options for decorative finishing of riser boxes for pipes. The most common option is to veneer them with PVC panels. They look great, are protected from moisture, are very easy to install. With this method, if the box is angular or U-shaped, you need to purchase decorative plastic corners in order to make the design look more aesthetically pleasing.

Often plasterboard boxes are tiled with ceramic tiles, porcelain stoneware. This is a good option, especially if the walls have the same finish - then the box will fit well into the interior. In addition, additional protection against moisture and noise will be created.

When decorating a drywall pipe box, it can be equipped with additional functions. There are designs with shelves for toiletries, niches for a brush or plunger, hooks for towels and other useful details. You can use the partitions of the box as efficiently as possible, you just have to show your design imagination.

Blueprints

Before installing the toilet box, the right decision would be to draw up frame drawings. They should indicate the dimensions of the main guide profiles, door openings, vertical and horizontal distances between the stiffeners, ventilation holes and other elements. Such drawings will help not only to orient correctly during the installation of the box, but also to calculate in advance the consumption of drywall sheets, metal profiles and fasteners.

Calculation of materials and components

It is very simple to calculate the consumption of drywall for a toilet box. It is enough to know the height from floor to ceiling and the width of the partitions - from these values ​​​​you can calculate the total surface area. The number of metal profiles can be calculated based on how far the stiffeners will be located from each other, usually this distance is 30–40 cm. Here it is also worth considering the frame for the door, recesses, ventilation holes, and other details. The number of fasteners - self-tapping screws and corners - is calculated according to the number of profile joints, an amendment of 15% can be added to this.

To build a drywall box in the toilet, you will need the following materials and tools:

• GKL sheets of moisture resistant 0.65–0.9 mm;
• metal profiles 40x40 mm;
• self-tapping screws for metal;

• drywall screws;
• building level;
• pencil, ruler and tape measure;

• perforator with a 6 mm drill for concrete;
• screwdriver or Phillips screwdriver;
• metal scissors or grinder;
• mounting knife.

The installation of the box begins with the manufacture of a drawing and marking the location of the profiles of the future frame along the walls and on the floor. To make a smooth and durable box, it is imperative to use the building level. First of all, guides adjacent to the bearing walls are attached. For them, U-shaped profiles are selected, best of all 40x40 mm, they are attached to concrete with a puncher, screwdriver and dowel-screws with a diameter of 6 mm. After that, it is necessary to assemble the frame lattice with stiffeners, partitions and a frame for the future access door.

For the strength of the frame, it is correct to make the distance between adjacent pieces of profiles at least 40 cm.

The profiles are fastened together with self-tapping screws for metal using a screwdriver. After installing each element, the level is checked. Profile fragments should be trimmed with a grinder with a cutting wheel for metal or special scissors.

After the frame is ready, the drywall sheets are installed. For them there are special screws. The sheets are carefully cut to size with a paint knife and attached to the frame. The fewer pieces of drywall cut off, the better, as the number of joints that then need to be processed to a uniform surface is reduced. This should be taken into account during installation and cut as rationally as possible.

Communications are required in the bathroom. Open sewer and water pipes do not look aesthetically pleasing. The box made of plastic panels allows you to optimally hide the risers of the water supply and sewerage. It looks great, is easy to dismantle if necessary, provides access to all elements for maintenance.

Benefits of using a plastic box

Hiding unsightly details is very useful. This allows you to ennoble the interior of the room, deprive it of awkward details. If you hide everything that spoils the finish of the bathroom, then it will be joyful and complete. It will become neater and more presentable. A box of plastic panels will best solve this problem.

When constructing this finishing element, it is important to take into account many points, to ensure that it does not impede the ability to take meter readings. Known situations require decisive action without delay, it is necessary to be able to quickly carry out repairs to eliminate the accident. With this in mind, it is worth thinking about the versatility of the product being created.

There are various implementation options. Especially often, eye protection is made of drywall, and are often used. These options are good in their own way, but the last solution turns out to be more reasonable and efficient. The question of how to close the pipes in the bathroom with plastic panels is more relevant. This method is more justified, it is easier to implement.

Its positive qualities are as follows:

• A box in a bathroom made of this material does not need further finishing.
• Ease of dismantling with the preservation of all components. This can be useful when using pipelines with fittings and threaded connections.
• The simple installation of the structure makes it a good solution. It is easy to build it yourself without the use of inaccessible resources.
• High resistance to deformation and maintenance. The material is highly flexible and durable. The damage will not be fatal. Any panel can be easily replaced with a new one.
• The compactness of the design is achieved by a slight thickness of the material.
• A functional, convenient product will withstand repeated assembly and disassembly; inside it you can store a variety of items and accessories, since there are all conditions for this.

With all the huge number of advantages, this solution demonstrates minor drawbacks, one of which is low resistance to temperature deformations. An irremovable smell cannot be a virtue either. Plastic decomposes over time, while the air contains some components of this decomposition that are undesirable.

Preparatory stage of installation

Be sure to check all pipes before installing the box!

Just before you hide the pipes in the bathroom, you will need to make some preparatory measures. All pipes are carefully inspected. If problem areas are found, the defect should be eliminated as long as possible.

Advice! If new communications are carried out before installation, they should be performed with the utmost care with a minimum of connection complexity. Any element can threaten with breakage, which may be accompanied by leaks.

1. The dimensions and shape of the product must be carefully analyzed. Masking can be done in several ways. In some of them, everything closes completely, in others - you can limit yourself to only a part, which allows you to leave more free space and spend less material. When completely closed, it becomes possible to get additional storage space for brushes, detergents and other substances.
2. After accurate measurements, you can create an accurate design drawing. In it, carefully work out all the details regarding the location of the inspection hatches, their parameters. This will provide unobstructed elements and counters.
3. In the subsequent tiling of the walls, the first thing to do is to install a protective structure. Then the tiles will need to be laid only on open surfaces. This reduces the consumption of ceramics. According to the drawing, it is worth calculating the material consumption for, its stock should be 8% higher than the calculated one.
4. For the case, you will need to use sheet or rack panels. In the installation, metal profiles of rack and rail types will be required. Seam joints are supposed to be closed with skirting boards. In stock, you need to have silicone sealant, self-tapping screws, a mounting knife, inspection hatches.

Frame mounting features

First, guides are placed on the walls that are adjacent to the corner. This must be done in compliance with the level. These profiles set the size of the entire structure. For control, you can use a bubble or pipe building level.

Important point! The fastening of a steel profile will be more reliable if it is fastened to the wall with dowels and euro screws. For installation on a tile, metal screws are required, installed in the seams between the tiles. At the same time, it can only be mounted on already dry tiles. It is important to turn the screws very carefully and carefully. If during its rotation the self-tapping screw is clamped, the process should be stopped. When twisting, the self-tapping screw will not hold.

It makes sense to make the design more compact, since it is important to save a small bathroom space. For this reason, it is better to mount the guides closer to the pipes.

After installing the guides on the walls, you can begin to form the corner from the outside. A hard corner is required. The corner post is twisted from two profiles of the guide type. In this case, the shelves are directed at right angles to each other. You can screw them with small self-tapping screws. Next, the resulting product is put in place. For these purposes, the carrier profile of the cd type is cut into parts corresponding to the length and width of the structure.

First, a corner stiffener is fixed to one wall. Pieces of the profile are inserted into the guide fixed on the wall and the profile of the corner rib. In the middle, additional jumpers are needed, they will allow you to mount plastic panels. The work necessarily uses the building level, the box should not turn out to be crooked, it should look perfect.

How to sheathe the resulting frame with plastic panels

When the frame for the plastic box is completely ready, it can be immediately sheathed with plastic panels. You need to start this by setting the start profile. Its fastening occurs with the help of self-tapping screws on one of the guides on the wall. You only need to mount on one guide. If you fix the starting profile on two guides on both walls, then the installation of the last plastic strip will be a real test. When fixing, great care will be required, since the starting strip cannot be damaged.

Then a small strip of plastic is measured and cut off from its sheet. It is possible that the strip will be measured in length and width. For cutting plastic, it is best to use an ordinary construction knife, it does an excellent job with this manipulation.

One side of the plastic strip is inserted into the starting profile. On the other side, you need to put on an angular plastic profile and fix it with screws to the frame. The other side of the plastic box is sheathed in exactly the same way, with one exception. The last strip of plastic must be installed with the starting profile put on. It is better not to fix this strip with self-tapping screws. Much easier to fit with silicone. She will hold on tight. If necessary, the silicone can be simply cut off with a knife.

After installing the plastic, it is the turn of the revision holes. They need to be cut in predetermined places. Manholes are mounted in the holes, providing access to meters and taps. Inspection hatches should not be screwed either. It is much more practical to glue hatches onto a plastic box using a good sealant. This work can be considered completed.

Video: Pipe box in 30 minutes!