Alpine slide in the form of a staircase. Do-it-yourself Alpine slide (76 photos): step by step we create a complex element of landscape design. Flowers for an alpine slide

Alpine slide a fashionable attribute for arranging modern garden and park areas. Making a rock garden at your dacha with your own hands: step by step photos, diagrams, selection of plants.

When choosing a place for an alpine slide, it is important to provide for the following conditions:

In landscape design, there are many styles of garden design, including elements of a desert landscape, rocky gardens, ponds and bridges, which must be in harmony with the built hill.

Making a slide with your own hands is most preferable when decorating a garden. At independent execution work, you can avoid high costs for the services of a landscape architect. Having step-by-step photos and diagrams for arranging the slide, it will not be difficult to complete the work of constructing a rock garden with your own hands.

It is very important to do it right preparatory work so that the slide is stable

Alpine slide - preparation

First you need to determine the location on the site where the slide will be located. Shouldn't grow nearby perennial shrubs and trees, which can eventually shade the plants on the hill. A place that is open on all sides and accessible to view from all corners of the garden must be dry. High level groundwater will adversely affect the durability and strength of the slide base. In this case, the groundwater level must be lowered using special drainage.

Do-it-yourself drainage under an alpine slide (step-by-step guide).

The drainage installation begins with digging a pit, the dimensions of which are equal to or slightly more area slides. You must first make markings by installing pegs and pulling the cord. The durability and strength of the slide structure depends on the degree of reliability of drainage, so the depth of the pit should not be less than 0.8 m.

The Alpine slide is a fashionable attribute for arranging modern garden and park areas. Making a rock garden at your dacha with your own hands: step-by-step photos, diagrams, selection of plants.

When choosing a place for an alpine slide, it is important to provide for the following conditions:

In landscape design, there are many styles of garden design, including elements of a desert landscape, rocky gardens, ponds and bridges, which must be in harmony with the built hill.

Making a slide with your own hands is most preferable when decorating a garden. By doing the work yourself, you can avoid the high costs of hiring a landscape architect. Having step-by-step photos and diagrams for arranging the slide, it will not be difficult to complete the work of constructing a rock garden with your own hands.

It is very important to carry out the preparatory work correctly so that the slide is stable.

Alpine slide - preparation

First you need to determine the location on the site where the slide will be located. Perennial shrubs and trees should not grow nearby, which could over time obscure the plants on the hill. A place that is open on all sides and accessible to view from all corners of the garden must be dry. A high groundwater level will adversely affect the durability and strength of the slide base. In this case, the groundwater level must be lowered using special drainage.

Do-it-yourself drainage under an alpine slide (step-by-step guide).

The drainage installation begins with digging a pit, the dimensions of which are equal to or slightly larger than the area of the slide. You must first make markings by installing pegs and pulling the cord. The durability and strength of the slide structure depends on the degree of reliability of drainage, so the depth of the pit should not be less than 0.8 m.

Arranging a rock garden is an incredibly exciting activity that requires a creative approach. In the process, a great abundance of possibilities opens up before you, the main thing is to show imagination and imagination.

What is an alpine slide? In essence, it is an imitation of a mountain landscape with perfectly selected beautiful flowers and plants. Such a composition in the garden should harmoniously fit into the overall landscape, complementing it favorably.

Creating a rock garden is a step-by-step process that requires attention to nuances. First of all, you need to think about the size of the slide itself, optimal location transitions, paths, steps and the structure as a whole.

Choosing the location of the alpine slide

It is very important that the location of the rock garden is well lit. Alpine plants are light-loving: it is the amount of sunlight that affects their growth and development. If we talk about soil, rocky soils with a limited amount of water will be optimal. Excess moisture is extremely destructive for mountain flora, so it is important to prevent stagnation of water in the drainage.

In garden plots, quite a lot of shapeless varieties of stones often form, which owners sometimes use for a future rock garden. In this case there is a risk instead beautiful design get a meaningless and ridiculous mountain of stones. Experienced here landscape designers However, it is recommended to carefully select pebbles according to appearance, size and shape to create an exquisite mountain landscape.

How to choose the right stones for a rock garden

For your future rock garden, try to select stones of no more than two species of the same size and same structure as possible.

Also consider characteristic features plants and flowers that you are planning for the slide. As a rule, they take root well on calcareous rocks with a porous structure, which facilitates the penetration of the roots inside. But such soil needs to be acidified periodically, since it has an alkaline reaction. It is advisable to embellish the gaps between plants and stones marble chips or crushed stone. So, the rock garden will take on a beautiful finished look.

Advice: buy stones from special stores. This is the only way you will be confident in the quality of the material, because the stones must be environmentally friendly and have a heterogeneous structure.

The most suitable rocks are granite, travertine, limestone, slate and sandstone. Use stones of the same type weighing about 100 kg and showing signs of erosion. Optimal height rock garden - up to 1.5 meters.

Varieties of alpine slides

The most common and simplest type is a rocky cliff. Naturally, it is possible if there is steep slope. In this case, work begins from the base, where large blocks of stone are laid, and then various plants are planted.

The next type is a mountain composition that transforms the design into a unique place of extraordinary beauty. To create such beauty, stone blocks are hidden two-thirds into the ground and chaotic paths are arranged, forming a stunning mountain landscape.

Color range

The maximum effect in creating a rock garden can be achieved by a skillful game of color transitions.

Combinations of three shades are considered luxurious. For example, yellow harmonizes perfectly with pinkish, or lilac flowers. Thus, yellow is balanced by two similar shades.

You can visually bring any object closer by combining yellow and orange, and move it away using blue. Take a closer look at any landscape design. Surely you will notice that the blue and blue flowers almost invisible, and plants with warm shades, on the contrary, they visually bring objects closer.

Since ancient times, designers have been using the game of contrasts in order to, thanks to one element, emphasize the splendor and uniqueness of another. One large plant looks much brighter and more expressive if it is enveloped from all sides low-growing species. But compositions with whole and dissected leaves look most advantageous against each other.

Dominant element

The rock garden will look much more elegant if it is dominated by a bright dominant element. These can be the most spectacular flowers or plants, original stone or stream. This accent must be visible from all sides, because it is what gives final completeness to the design, and the landscape is perceived as one whole.

How to choose plants for a mountain composition

When choosing plantings, it is necessary to take into account their sensitivity to light in the place where the rock garden is planned. Remember, not all plants are suitable for a hill and are combined with stones or other types of plantings.

So, for example, the location of the rock garden in the northern part suggests shade-tolerant types. They will also need enough moisture. These include primrose, bergenia, fern and hosta. Light-loving plants, for which soil drainage is less important, are much easier to choose. These are tulip, young, thyme, iris, etc.

There are also many universal varieties that are perfect for both sun and shade - violet, bellflower, crocus, muscari, phlox.

IN winter period looks nice Canadian spruce, mountain pine, juniper. The most impressive are variegated and evergreen plantings.

Alpine slide in the country

In general, there are no absolutely two identical rock gardens, since each owner of the site tries to bring something new and individual to the design. By the way, many people believe that best solution for a mountain composition - an option without any construction work(cement, brickwork etc.). This approach provides the opportunity to rework the entire structure in the future and significantly facilitates the work process.

Do you decorate yours? personal plot? Tell us which version of the alpine slide design did you like the most?

If there is a ledge or unevenness in your dacha, plot or garden, make an alpine slide.

Firstly, such a flowerbed is very beautiful; within a year its rocky cliffs will be covered with a continuous carpet of lovely pads of flowers, herbs and mosses.

Secondly, the construction of a rock garden itself is a fascinating activity. Here you need to think through everything: where to plant coniferous shrubs, what stones and perennials to choose, so that the colored carpet in the middle of the rock scree plays with colors all year round.

And thirdly, if the soil at your dacha is poor, sandy or rocky, and is completely unsuitable for organizing other types of flower beds, then alpine hill plants in such conditions, on the contrary, will develop normally and bloom well.

Not everyone correctly understands what an alpine slide is. The structures made of plants and stones on the site are far from alpine slides.

Rock garden (alpine slide)- This landscape compositions, imitating a mountain landscape with terrace-type areas with stones, squat shrubs and long-flowering perennials.

Let's look at some of the subtleties of designing an alpine slide flower bed

If possible, the rock garden in the garden should be:

isolated from outbuildings, playground, etc.;

proportional to the entire area of the site;

removed from flower beds with bright lush blooms;

located in the most illuminated place of the site, close to the water supply source (if this is not possible, then additional watering points will need to be equipped);

as realistic as possible to the mountain landscape;

located near a house or recreation area.

Many people have thought about how to make an alpine slide with their own hands. And only a few, especially stubborn and patient, decorated their summer cottage plot terraced hills. Where did they start? Of course, from the choice of location.

In order to rocky flower bed organically fit into environment garden, it is not necessary to look for a large space - alpine plants so compact that it costs nothing to fit dozens of them into a modest area of the slide.

The height of the rock garden should not conflict with the existing landscape. If possible, you need to make sure that the shapes, textures and colors of the slide harmoniously fit into the concept landscape design.

An alpine decorative flower garden in a garden looks very expressive against the backdrop of dense, tall bushes or small but lush trees.

Do-it-yourself Alpine slide - step-by-step instructions

What materials and tools do you need to buy for an alpine slide?

stones of the same type, river sand, crushed stone, gravel, turf, humus, peat, limestone, earth and planting material;

tape measure, cord, pegs, bayonet shovel, metal crowbar, garden trowel with a long handle, wheelbarrow, scissors, ladle (for scooping soil out of the wide sumps of the hill), garden watering can.

Is everything at hand? Then let's get to work!

Any alpine slide project begins with laying out the site and drawing the outline of the future flower garden (this is where you will need a tape measure, pegs and cord). The area for the flower garden is cleared, the soil layer is removed to a depth of 30-40 cm, weeds are carefully weeded and weeds are removed.

When the clearing is completely finished, it is necessary to make a gravel cushion on the deepened area - add a layer of gravel, slag and construction waste (broken brick, limestone or granite crushed stone), 10 cm thick. This kind of drainage will protect the roots of plants from waterlogging, preventing stagnation of groundwater, and will ensure normal aeration.

The permeable layer needs to be made thicker where the soil is very dense, structureless, silty and poorly permeable to water. Wetland is the first enemy of alpine plants - ascetics are accustomed to growing on slopes in light, rocky, sandy, acidic soils.

On top of the drainage layer (the base of the rock garden), you need to make a sand cushion - pour a layer river sand(5 cm thick), compact well and water.

Next, mix in equal proportions turf soil (it can be prepared in advance or bought at any nursery), perlite, sand, pine bark, wood chips, small crushed stone, crushed peat, humus and sphagnum.

There is no need to add too much fertilizer to this layer. Over-enrichment of the soil can lead to trees and flowers on the hill growing too large or, conversely, dying altogether. It is recommended to feed only some tuberous and bulbous plants, and then as rarely and as carefully as possible.

The prepared soil mixture is poured over the entire surface of the hill, at the same time modeling the relief of the rock garden according to the model of the natural landscape. The earth mound does not need to be made uniform and neat. Both on a large and a small alpine hill in the garden, it is necessary to manually form “cliffs” and “valleys”, “peaks” and “plateaus”, paths and transitions.

After the remaining filling of the area with a ball of earth, you can begin laying stones by “laying” “pillows” of river sand under them.

What shape should the stones be in a rock garden and how to arrange them correctly?

Let's look at what stones are needed for a small and large alpine slide, their names and installation methods.

To organize such an exotic flower garden, you need to choose only those rocks that will not transfer to the soil heavy metals and salts, and will not oxidize the soil.

Rocks hewn by years, water and wind irregular shape They will look much better in the garden landscape than freshly harvested ones. Stone slides should be similar in structure, or better yet completely identical, but different in size.

An excellent choice for a rock garden has always been and will be: natural granite, organic limestone or decorative sandstone. Forest boulder, dolomite, travertine, gneiss or basalt are suitable. Another option: serpentinite, elbrus, jasper, serpentine, quartz, etc.

There is no need to collect stones from fields and meadows. You can buy good specimens at the quarry. The weight of one stone can reach approximately 15-100 kg. That is, for a stone flowerbed measuring 1.5 x 3 m, the developer will need about 1-1.5 tons of stones.

Let's move on. Laying should begin from the bottom (from the foot) up - gradually moving from larger stones to smaller ones. The core of the alpine hill is formed first. For this purpose, choose the largest and most beautiful boulder and install it in a small recess. To prevent the stone from shaking, it can be reinforced with crushed stone.

Advice. There is no need to lay them in compliance with equal distances and geometric harmony - in the natural environment, on mountain slopes, stones and boulders are located in a chaotic disorder.

When laying, you need to gradually deepen not only the core of the composition, but also all the other stones. The resulting sinuses fall asleep slightly earth mixture for a rock garden and watered with a sprayed stream of water - plants will be planted in them a little later.

At the top, a conical boulder looks beautiful, symbolizing the top of the mountain, surrounded by flat stones.

In the process of placing stones, landscape designers advise moving away from the composition and assessing the result from different angles. An alpine slide decorated with your own hands is considered ready if it looks holistic and harmonious even without conifers, shrubs and flowers.

But that's not all. Huge weight boulders and stones have to lie down for two or three weeks, “get settled”, so to speak. And only when the earth settles and you can start building a flower garden on an alpine hill.

Plants for an alpine hill are the key to a spectacular design

Tempered tough climatic conditions highlands: cold, low atmospheric pressure, strong wind and temperature fluctuations, flowers for alpine slides demonstrate amazing endurance in the difficult climate of Russia.

In order for the rock garden created at the dacha to truly resemble an oasis of a mountain landscape, shrubs and plants must be selected according to the following criteria:

unpretentiousness to climate and soil;
short stature;
moderate growth;
non-aggressive method of reproduction;
multi-year development cycle.

Low-growing and ground cover plants for alpine hills

Atsena Buhanana;
Youthful;
Borodnik is hairy;
Mountain grate;
Tenacious;
The bone is hair-like;
Fern;
Short-leaved sedum;
Decorative cabbage;
Crassula;
Sagebrush;
Heuchera;
Spurge;
Stahis.

Advice. Ground cover plants with a strong root system are placed on the slopes of an alpine hill to prevent its erosion.

Flowering plants for alpine hills

Barberry;
Colchicum;
Veronica;
Carnation;
Gentian;
Gypsophila, wulfenia;
Delphinium;
Dryad;
Lancet gorse;
Poskharsky's bell;
Primula Allioni;
Saxifrage;
Bloodroot;
Burachok;
Buttercup;
Edelweiss;
Let's swing the creeping one;
Evening primrose Missourian;
The Pyrenean catchment;
Thyme;
Campanula garganica;
Phlox is low growing;
Soapwort basilicofolia;
Jaskolka;
Draba evergreen;
Mertensia maritima;
Fuopsis longostolic;
Pterygoid rotundifolia;
Decorative strawberries;
Rhodiola rosea;
Chiastophyllum oppositeifolia;
Himalayan geranium;
Mountain cornflower;
Hellebore;
Liverwort;
Anemone;
Cat's paw;
Rezuha;
Violets and daisies.

Advice. Each of the flowering individuals in the rock garden composition plays its own role, so the flowers should not obscure or interfere with each other. It is important here to achieve a smooth change in shades of the slide. This can be easily achieved by combining alpine plants according to flowering dates.

Long-flowering plants for alpine hills

Onion and bulbous

Decorative Karatavsky;
Cornflower and island onions;
Tubergen and Besianum onions;
Scylla;
Vesennik;
Sternbergia;
Cyclamen;
Snowdrop;
Ranunculus;
Pushkinia;
Clivia;
Rhodohypoxis;
Brandushka;
Hyacites;
Lilies of the valley;
Babiana;
Corydalis;
Merendera;
Sisyrynchium;
Tecophylae;
Poultry farmers;
Mauricia;
Muscari;
Garden buttercup;
Dwarf varieties of irises, daffodils, dahlias and tulips.

Advice. The rocky structures of the rock garden will look as decorative as possible if you know the exact timing of flowering of the bulbous plants. And also, when planting onions in a rock garden with good drainage (stones and gravel prevent the bulbs from rotting), leave enough space between them for growth. Mulch temporarily empty areas with tree bark or pebbles.

Low-growing grasses for alpine hills

Quaking grass;
Lagurus;
Highlander;
Cuff;
Alyssum;
Oregano;
Acute-flowered reed grass;
Feather grass;
Pennisetum orientalis;
Gray and red fescue;
Liriope;
Sheep evergreen;
Barley is maned;
Esholtz;
Heathers;
Erica.

Advice. Herbaceous plants remain attractive until late autumn, while others have already withered or have not yet blossomed. Acting as a background ornamental grasses serve as a rich decoration in the creation of an alpine slide.

Compact shrubs for alpine hills

Mountain pine;
Wolfberry boletus;
Blue spruce;
Barberry;
Cotoneaster horizontal;
Juniper;
Larch;
Thuja occidentalis;
Miniature Pine;
Korean fir;
Euonymus;
Spirea;
Dryad;
Rhododendron;
Daphne.

Advice. Dwarf trees and plant the bushes first, allocating the most spacious areas of the hill for them. Do not plant them on the bottom or top of the ground. Optimal place for upright dwarf forms in rock gardens - near large stones along the edges of the hill, on long distance from each other. At correct landing deciduous and coniferous shrubs will not require any special care from you. But for the winter, you will have to cover some of them by tying the plant with burlap or a special cover.

Very often moss is included in the design of alpine slides. Transplantation of moss plates from the forest onto rock garden stones is carried out as follows. First, the moss cushion is cleared of its native soil, and then thoroughly mixed in a blender with a couple of tablespoons of sugar and 200 g of kefir. With the resulting homogeneous mass, you need to lubricate the areas of stones (using a brush) on which you want to see in the future green carpet from moss. The plant will take root faster if it is regularly moistened within three weeks after planting.

A neatly trimmed green lawn can be a successful frame for an alpine hill.

Advice. No need to try to place it in a rock garden more species. You will achieve a complete composition only when, having learned about the types of plants from A to Z, you are able to provide, even for a small number of flowers, a decent existence.

Alpine slide - planting diagram

There should be enough space between the stone scattering for the normal development and growth of green spaces. Seedlings are planted in a small hole dug at an angle, as shown in the figure, their roots are straightened, lightly sprinkled with earth and compacted. After planting, the hill needs to be watered. It is better to do this from top to bottom - the water flowing down will well saturate the soil and go straight to the roots.

When planting rosette flowers on a hill: orostachis, gentian, lewisia, etc., do not plant them next to ground cover. The latter grow quickly and can crowd out tender plants.

Plant bulbs will not spread if you plant them inside a limiter - a jar or an old bucket without a bottom.

Schemes of alpine slides (with plant names)

Scheme No. 1

Scheme No. 4

Types of alpine slides

The paradoxical unity of fragile vegetation and stone blocks gives summer residents true pleasure, encourages reflection and calms them down.

And after reading the article, all you have to do is choose: admire the whimsical harmony of the alpine slides in the photo or recreate one of the views on your site. Moreover, there are 7 of them in rocky flower beds:

“rock” with natural surface breaks;

a rather complex “mountain slope” with coniferous trees and huge boulders;

landscape “mountain valley” with asymmetrically placed groups of stones;

“terraced slope” with retaining walls of various heights, lengths and shapes;

decorative “forest ravine” with a spring or artificially created waterfall;

“rocky wall” - a low mound with randomly scattered stones;

the extravagant “Czech rolling pin” that defines technical feature which is layered masonry;

the most stylish of the stone compositions is the “alpine lawn” with wild plants, growing exclusively in mountainous areas.

Conclusion

Don’t listen to those who claim that a rock garden at your dacha can be planned and created in one day. Of course not. Well, perhaps the simplest version of a mini alpine slide, and even then not in the garden, but in a city apartment.

Want to do it right? Then lay the drainage, fill the soil and form the base of the slide in the fall, and lay the stones and flowers and plant them only in the spring.

Alpine slide - photos of beautiful rock garden design options

“Gorka” is the name of a costume that is most popular among the civilian population: tourists, fishermen, hunters.

Amateurs are equipped with this costume active games in the open air, jeepers, “diggers”, pioneers in the construction of power lines, communication routes and simple mushroom pickers - summer residents.

Let's try to figure out why this costume is so popular.

A little history

Some historians are inclined to assume that the origins of the creation of the “Gorka” or “special mountain suit” (name in the USSR) go back to the uniform of the German ranger unit of the 1939-1940 model.

Yes, indeed, there is a difference between a modern suit and a huntsman's suit common features, but the jackets of the huntsmen were tailored in the image and likeness national clothes peoples of the far north and bore the name “anorak”, which is constantly found in documents of those years.

Anorak - is a long, knee-length and below, one-piece front and back, raincoat - jacket.

The first samples of national clothing adapted for military needs were, according to archival documents, developed in Finland in the mid-30s of the last century. The Germans simply adopted the experience and practically used the work of the Finns.

In the USSR, the development of summer and insulated uniforms for units special purpose, leading fighting in mountainous areas, was started in the mid-70s and was associated with the unstable situation in the Middle East. Later, during the fighting in Afghanistan, a special mountain suit (“Gorka”) was used as uniforms in the mountain rifle units of the USSR Army.

The Soviet “Gorka” differed from the German one primarily in that as part of the suit, instead of anarak, Soviet specialists used a classic-cut jacket, despite the complication and increase in cost in production. This was justified as follows: in combat conditions, it is almost impossible to remove an anorak from a wounded soldier without cutting it, unlike a jacket, which can be unbuttoned. Moreover, after this you can sew it up, wash it and use it again.

After the Afghan campaign, the Gorka suits, due to their characteristics, remained as uniforms and became available to the civilian population.

Composition and materials

Currently, among the variety of products on the market, there are both suits with an anorak jacket and classic, Soviet-style ones. We’ll look at them in more detail later, but now we’ll look at the most common materials used in sewing this suit.

Thick, at least 250 g/m2, cotton tent fabric is the material from which most Gorka suits are made. To reinforce the areas most exposed to wear (elbows, knees, shoulders) and getting wet, additional pads made of a similar base material, or pads made of mixed rip-stop fabrics consisting of cotton and polyester, can be used.

Suits in the expensive segment can be used as the main fabric - Canvas (durable, wear-resistant, moisture-resistant, well breathable), and as a reinforcing fabric - membrane, which is much more effective than just a mixed fabric, protecting against getting wet and dirty.

There are summer, demi-season and winter “Gorki”. In terms of cut and functionality, they differ little from each other.

As a rule, the following is used as insulation:

in demi-season suits - fleece with a density of at least 180 g/m2;

in winter suits - padding polyester with a density of 300 to 400 g/m2, and fleece can be used as additional insulation in the back area, on the collar and inside the hood.

When choosing the color of a suit, you need to understand for what purpose it is being purchased and on what landscape it will be used.

Let's take a closer look at the most famous varieties of "Gorki".

Gorka-3

The most common costume. Since it was created for use in mountainous areas, its cut and characteristics are designed to ensure fast, comfortable movement specifically in mountain conditions.

At the same time, it “breathes” perfectly, has excellent windproofness and moisture resistance compared to suits made from simple cotton fabric.

Due to the high density, the specific weaving of the threads of the fabric itself and the use of overlays, increased wear resistance of the suit as a whole is achieved. Unlike fabrics with water-repellent impregnation, the “Treshka” material does not lose its properties even after repeated washing.

Like most "Gorkas", "Treshka" can be called anti-encephalitis clothing, since seals in the ankles, hands and waist area do not allow insects to penetrate inside the clothing.

The suit is sewn with especially strong threads that retain their properties under high tensile forces, including for buttons.

Buttons are made from a special polymer, which is distinguished by high strength, heat resistance and anti-reflective properties.

The suit consists of a jacket and trousers.

A loose-fitting jacket with a zipper that serves as a windproof strip and allows you to avoid snagging the buttons when moving on difficult terrain.

Four external tactical pockets with flaps and one internal.

The special design of the adjustable hood does not limit peripheral vision.

Trousers with a “high” waist, with an elasticated waistband and belt loops for a wide belt. Additionally, for convenience and freedom of movement, adjustable suspenders are provided.

Six tactical pockets with button and flap closures.

Gorka-4

Sewn according to the classical canons of requirements for outerwear peoples of the Far North.

Possessing all the properties of the “Treshka”, the “Four” provides better protection from the wind and has higher thermal insulation qualities.

The specificity of the cut allows you to additionally place a large central pocket on the jacket.

But there are also some inconveniences. For example, putting on and taking off a jacket over your head, especially when the clothes are damp or wet.

It is for this reason that the Quartet is currently practically not produced in insulated and winter options, but in the summer she has no less fans than “Treshka”.

Gorka-5

“Five” is the latest development of the “Gorok” family.

First of all, it is as lightweight as possible and made from the latest generation materials: Canvas 260 g/m2, rip-stop pads 210 g/m2.

To all the previously listed advantages of “Treshka” are added:

places for chevrons;

fasteners: central on the jacket and codpiece with a zipper;

anti-theft pockets with flaps on Canadian buttons (buttons through which the person is pulled strong threads already attached to the jacket);

ventilation holes;

pockets for the use of shock-absorbing polypropylene inserts in the areas of the elbows, back (with a zipper) and knees.

Thanks to new characteristics and properties, the new “Gorka 5” is in high demand among advanced fans.

"Gorka Highlander", "Gorka Sturm"

Modifications of "Gorki 3".

The general concept remains the same with some nuances. For example, the number of pockets is reduced, there are no adjustable suspenders, no zipper on the jacket, zippers are used on the codpiece, etc.

At the same time, the quality of the main material, threads and accessories remains high.

Such minor changes do not lead to a fundamental deterioration in the basic properties of the suits, but contribute to their accessibility to a wide audience of buyers.