Bath from a metal change house. Not an expensive pleasure - Do-it-yourself bath from a change house Do-it-yourself bath from a change house

To facilitate the tasks of building a bath on personal plot, company specialists Kraus offer to install on the site bath from construction trailer. In just a few days, after the order is placed, the bath will stand on the site, a specially equipped room in compliance with all security measures will meet the requirements for a country bath. Just a few and you and your friends can enjoy all the benefits of this type of hygiene procedure. To use a construction trailer as a bathhouse, it is not necessary to prepare the foundation, it is enough to choose a flat place and install the trailer there. The finished solution includes all the technical details necessary for this type of structure. There is no need to experiment with the installation of equipment and security, all that is needed from the buyer is only the desire to equip a bathhouse on your site.

Among the offers on the market of prefabricated structures there are construction trailers of change houses. These are very convenient solutions. They are very mobile and can be put into operation directly on the chassis. And if you need to move the structure, it’s easy enough to find vehicle to which you can attach a trailer. The move will be quick and painless, without bags and suitcases with things.

When ordering a product such as bath change house price it depends on interior decoration premises, from the equipment that will be used in the steam room, as well as from the size of the room. If the client considers it necessary to make additional partitions in the room, this will also affect the price. But don't let this scare you, if you order directly from the manufacturer, the difference will not be so great. Company Kraus offers quality baths change houses at an affordable price, we care about our customers, and our production volumes are large enough to allow us affordable prices for our products.

Under the baths, container blocks are also equipped. this is an easy way to equip a site with a bathhouse for a long time. By placing an order ready solution, you can enjoy a strong steam in your backyard at any time.

After construction works completed usually leave traces of this activity. But not in all cases, such "remains" are subject to mandatory removal from the territory. Of course, construction garbage it’s worth taking it out, but now, if a change house was equipped on the site, then it can be used. For example, a do-it-yourself bathhouse can be made from a change house, as it is relatively simple in terms of work and very practical. It goes without saying that the successful completion of the task will require some experience in carrying out such work and the availability of a tool, but really impossible for common man no action is required.

Note! The key to the success of any event is its careful planning and consideration of all upcoming actions. In the case of making a bath from a change house, it must be understood that, in principle, the conversion of one room to another is possible, but due to the specifics of their purpose, some efforts will have to be made to complete the task.

For the convenience of understanding what the person who started such work will face, it is better to divide all actions into several stages.

Foundation

First of all, you need to make a solid foundation. A change house can also stand on several foam blocks, as in fact, most often it is, but for a bath it is necessary to make a strong and at the same time ventilated foundation. An example of such a foundation is a pile manufacturing option. If the question arises, how to make such a foundation, then work in in general terms are as follows:

Based on their dimensions of the change house, the area reserved for the future bath is marked.
Along the perimeter of the building, as well as under the dividing walls, at a distance of about 1.5 meters from each other, it is necessary to drill a series of recesses necessary for the installation of piles. As such, you can use asbestos pipes or their metal counterpart, and when drilling, you need to start from their diameter.
Pipes must be dug in so that their upper parts are in the same plane. For their solid installation, the pipes must be sprinkled with medium-dispersed crushed stone and gravel.
A timber with a section of 20 × 20 cm is laid and fixed on top of the pipes. As a result, a basis is formed for the installation of the structure.

Preparing the frame of the change house

The next stage of work will be the preparation of the frame of the change house for installation on the base. We are talking about the fact that the operating conditions of the bath are quite extreme and, in this regard, must be selected and Decoration Materials. Simply put, what the change house gets off with is not suitable for a bath. In this regard, all trim, both external and internal, must be dismantled. In fact, one frame of the building should remain. This is important not only because a number of works are to be done, but also due to the fact that the change house also needs to be installed on a prepared base, and with what less weight, the easier it will be to complete the task.

Installation

In order to install the frame of the future bath on the base, you will have to hire a crane. This, of course, will require some material investments, but it will simply not be possible without a crane. When installing, it is necessary to monitor the accuracy of installing the frame on the base. Among other things, the requirements of safety regulations cannot be neglected. After the technician completes the work, the frame must be fixed to the base. To do this, you can, for example, use studs of a suitable diameter.

Finishing

After the frame is installed, you can proceed to finishing work. They can be conditionally divided into several stages:

Room insulation. This includes the laying of heat-insulating materials, and the installation of hydro-vapor barrier. It is worth recalling that the best option insulation will be foam. The material is resistant to moisture and has excellent insulating properties.
Finishing work. It is about internal and exterior finish rooms, now baths (if this was not done in advance). It should be noted that if for external surfaces you can use any suitable material, but for internal works a tree is traditionally chosen, and it is better to take hardwoods. One of the most accessible and quality options is a wooden lining, for example, linden.
Installation of equipment. The final stage of work on the construction of a bath from a change house can be considered the installation of equipment. It means installation heating equipment, installation of electrical wiring and water supply and sewerage systems. It is worth noting here that a bathhouse rebuilt from a change house is not very suitable for the construction of a classic sauna stove, so it is better to use, for example, electrical equipment.

On this general description work on the restructuring of the change house premises into a bathhouse can be considered completed. As additional source information, you can use thematic photos. Despite the fact that the work may seem somewhat complicated, in fact, with due diligence, it is quite doable.

Video

This video shows a mobile frame bath made from a change house:

A photo

All wooden buildings have their own identical features, therefore, given them, we will talk about how a do-it-yourself bath from a change house can turn out. In this case, we have an almost finished room for arranging a steam room - we just have to finish the job by adding some elements. So, we will talk about what else needs to be done, and also, as an addition, we will watch the thematic video in this article.

Steam room from the change house

Basic device

Any frame baths cabins and timber houses they are settled on a strip, pile or column foundation, therefore, in this situation, there can also be no exceptions. Depending on the parent structure, as well as on the condition of the soil, the thickness of the foundation is also selected.

In the photo above you see a frame that is installed for sheathing with a material that imitates a wooden beam. But it is not mounted immediately, but waterproofing and a wind barrier are laid under the bottom.
From the inside, the room is sometimes sheathed with ordinary boards, but in this case we are interested in how to make a bath out of a change house. Therefore, between the outer and inner walls we install a heater, which can serve as mineral wool.

Advice. Mineral wool can be three types- glass, stone (basalt) and slag, and any of them has good waterproofing qualities. But slag wool is made from melted slag from blast furnaces, therefore it contains particles of iron ore, which, when high humidity starts to rust. For this reason, it is better not to use it for a bath.

For the floor, just like for the walls, you need insulation, only without a wind barrier, and here it is best to lay a vapor-permeable film under the cotton wool smooth side out. Due to its porous structure, where the pores are made in the form of a cone, moisture can only penetrate in one direction and in this case it will turn out that it will pass from the insulation to the ground. Although the price of such a hydrobarrier is somewhat higher than a conventional film, the insulation will last longer, and ordinary cellophane can be laid on top, under the boards.

Such change houses under the bath are also insulated from the side of the ceiling, and the method is used exactly the same as on the floor, only upside down - inner lining / cellophane film / mineral wool / vapor-permeable film / ondulin or corrugated board. But this is not enough for a good bath - from the inside, under wooden lining foil or foil-wrapped polyethylene foam is placed on the walls and ceiling, but more on that later.

What do you need for a bath

Of course, if we focus on ready-made change houses, then everything is already there, but we need to equip the room so that it turns out to be a full-fledged steam room with a shower and a dressing room. Therefore, first of all, we need to take care of the ladder for water drainage, which in without fail must be installed in the washing and steam room.

Sometimes they are mounted without connecting to the sewer, but this is wrong, since soapy and dirty water, spilling onto the ground, after a while forms a hearth that spreads unpleasant odors, moreover, it is unhygienic.

For Wastewater you can equip the most ordinary cesspool, laying there from, but, again, such a place will have to be tightly closed with some kind of lid, otherwise the smells will spread throughout the site and to the neighbors. In order to completely get rid of the problem caused by unpleasant odors, can be equipped to drain a mini-septic tank.

Its installation is described by us in another article, and in addition, instructions from the manufacturer are attached there - in fact, water flows into the soil, purified by at least 75%, which is quite acceptable for plants.

As noted above, it is much better if you install on top of the mineral wool waterproofing aluminum foil or foil-wrapped polyethylene foam. The fact is that the foil is able to reflect thermal infrared radiation, which will increase the power of thermal insulation by an order of magnitude.

Advice. When installing the foil on the walls, it overlaps, only the top layer should overlap the bottom one so that moisture does not leak. If possible, such joints are best sealed with foil tape.

On sale there is a ready-made change house-bath with a stove made like a "potbelly stove", but what's the point in it if you want to equip there not just a shower, but a steam room? For such small room the temperature that will come from the steam room will be quite enough, and for additional heating, you can even leave the door slightly ajar for a short time.

The whole question is which stove to use for such a mobile steam room, and here, perhaps, the best option would be an electric heater stove, which can be either self-contained or mounted. The second option will probably be more convenient, since in our case there will be very little space, and it is better to save it.

Despite the small size of the room, the oven must be installed with a certain distance from wood paneling rooms to avoid fire. Also, in order to use an electric heater of this type, it must be installed on the side of the locker room circuit breaker RCD (residual current device).

Also you can use on solid fuel, only in this case, special fire safety measures are also needed. Since we will be dealing with open fire, the floor must be covered with galvanized sheet, and from the side of the firebox, the length of the metal sheet must be at least 70 cm, as shown in the top photo.

Such a stove, of course, will cost you less than an electric stove, and it will turn out to be more economical in maintenance, but it is larger in size and, of course, will occupy additional space in an already small room.

Conclusion

In conclusion, it should also be mentioned that for the equipment of a bathhouse based on a change house, you need to take care of running water. If you have such an opportunity, then connect it to the trunk, and if not, then use submersible pump or hydrophore, pumping it out of the well. For hot water you can install an electric boiler ().

If desired, an old decommissioned trailer may well be converted into a small building used as a bathhouse in a suburban area. suburban area. The advantages of such a choice are quite obvious, since a bath from a trailer will not require any special efforts and significant costs from you. After installation at the place of permanent operation, you will only have to insulate the walls and ennoble the appearance.

In this article, we will look at how to make a bath from a trailer with our own hands, and also give photo and video instructions.

When arranging such a building, you should always remember that its separate rooms (washing room, steam room and dressing room) must be reliably isolated from one another - this will ensure the required regime in the steam room.

Foundation preparation

In the event that you expect to receive a solid building suitable for use in winter period- you will have to worry not only about reliable insulation, but also about preparing the foundation for it. The choice of the latter is determined, as a rule, by the characteristics of the soil at the location of your future bath.

Note that for the situation we are considering (if the soil at the place where the bath is arranged is dense enough), it is quite acceptable to use options for lightweight strip or column foundations, prepared to a shallow depth.

It is also very important to pay attention to the fact that the height of the foundation base you have chosen is at least 35–40 cm. Only in this case is it possible to insulate the bottom of the building through the use of additional bedding.

Well, if you plan to make a bath-trailer in a mobile version, you can not make a special foundation for it at all, limiting yourself to simple supports made of reinforced concrete slabs.

Foundation arrangement

Before proceeding with the installation and conversion of the trailer for a bath, you should clearly determine its location, after which it will be necessary to carry out the following preparatory operations:

clean the place of your choice from stumps and debris;
to level and compact the soil at the location of the future bath-trailer;
prepare a frame from a 20 × 20 cm timber and install it on concrete blocks or brick columns;
sheathe the prepared frame with edged boards.

Upon completion of the preparatory operations, you can go directly to the finishing of the trailer.

Conversion procedure

Getting the truck in order

To turn an old decommissioned trailer into a full-fledged bath, it will be necessary to make every effort, associated, in particular, with the arrangement of a well-insulated and thoroughly insulated steam room.

To do this, first of all, you should carefully examine the trailer for the presence of visually distinguishable defects (cracks, potholes and holes) in its walls, floor and ceiling and try to repair them using a suitable building material.

Note that when carrying out repair and insulation work, you will have to deal with one of the following types of typical wagon buildings:

metal welded structure;
wooden frame, lined with clapboard or chipboard.

Refurbishment and insulation

To insulate a metal trailer, you will need to refine its design. This revision will consist in preparation (welding to metal frame) special plates with holes necessary for fixing wooden beams. By mounted in this way wooden frame subsequently, insulation and finishing of the building will be carried out; in this case, the insulation is supposed to be laid in the space between the individual bars.

To insulate the outer and inner surfaces of the trailer (its doors, ceiling, walls and floor), you can use such common protective materials as basalt wool, polyurethane or Izover.

Note! When applied mineral wool the surface to be protected is pre-closed polyethylene film or glassine, used as a waterproofing, which excludes moisture from entering the insulation.

Outside insulation can be closed edged board or decorate the bath with siding.

Do not forget that the floor of the converted building is also subject to mandatory insulation, produced using special polyurethane sheets, on top of which it is laid batten. AT winter time such a floor structure will protect the interior spaces of the trailer from severe frosts, and will also allow you to retain heat inside its premises.

As for the choice of heating equipment for a steam room of a converted trailer, in such cases, typical fireplace stoves are most often used. You can see video and photos of baths from a construction trailer at the end of the article.

Good afternoon friends. A good friend was presented with an old change house, 6x3m in size, which was divided into 2 parts, there was a brick stove in the middle.
It was decided to make a bath out of the trailer. The trailer was brought along the narrow winding streets of the dacha association and installed on concrete blocks.
Unfortunately, the photo of the interior was not preserved, first of all they dismantled, removed the siding, stove, ceiling and walls (chipboard), as well as the old mine. cotton wool. A small bucket was collected from the trailer of nails.

After dismantling, the old one was replaced slate roof, on a roof from a metal tile.
Rear view, there was a window that was removed.

Side view

Front view, installed powerful door originally from the USSR, there were 2 windows, one with a decorative grille remained.

There is another window on the side.

In the car itself, part of the crate was left, part was replaced with a new one made of timber.

The trailer itself was divided into 3 parts, the largest room, the composition - vapor barrier-shields of 50 minutes of cotton wool, vapor barrier, ceiling and walls - lining, floor - floorboard. The floor around the perimeter is a screed.

The wiring is hidden in the corrugation, 3 lamps are brought out to the 3rd room, 3 sockets in 1 room.

Later, a small sofa and necessary furniture will be placed.

In the washing tile with the required slope

Walls - lining treated with a protective agent.

Crane removed from hot water, cast-iron stove vezviy, fire from the sink.

The door to the steam room.

The steam room has a Vesuvius stove, lining and Alder chambers, there is a ventilation window.

Hot water tank 60 liters, stone weight approx. 80 kg.

View from the steam room

The furnace is lined with brick, the walls are protected with refractory sheets. Foil under lining, 10 cm mineral wool mats

Chambers from Alder.

Hot water tank

The bath was made in free time, it took 2 months in terms, the first test was successful, heating up to 80 degrees in 1 hour. Water supply is solved at the moment by pumping from the source in which the bath is installed. Electricity is supplied. Plans to make a tie-in for cold water so as not to throw the hose and replace the hot water faucet with a more throughput one. Also equip with the necessary bath furniture and make a sheathing from the outside with insulation with mineral mats 50mm. About 180,000 rubles were spent on materials and delivery.