How to remove tape marks from glass. How to remove tape marks from various surfaces

Have you installed brand new plastic windows, but having freed them from the adhesive tape glued by the manufacturer, did you find stains on the frames? And these stains can not be removed with special detergents? No problem! So that you can deal with this problem, let's look at how to wash tape from plastic window.

This method is applicable even in cases where you need to remove old tape residues that are almost impossible to wipe off with window cleaners or other household chemicals. How to wash tape from plastic quickly? To do this, use this method. It is enough for you to warm up the contaminated surface well with a regular hair dryer. The adhesive trace will soften, lag behind the window frame, and you can easily wipe it off with any napkin or clean it with a sponge.

Important: remember that not all plastic will be able to survive such a thermal effect. Its most budgetary types can be deformed under the influence of high temperature. It is for this reason that before starting such work with the frame, it is advisable to dry an inconspicuous area of \u200b\u200bit with a hair dryer in order to find out how the material will behave. If you do not notice any significant changes, you can safely apply this method.

Method 2 - regular eraser

You can also remove the remnants of adhesive tape from the plastic window frame using a regular school eraser. All you need for this is a good rub on the duct tape. It will come off as easily as pencil marks on paper. This method is best used if the mark on the plastic is already slightly dry.

Tip: remember that this method of dealing with pollution can require a lot of time and patience from you, especially if there are a lot of stains on the plastic. Don't use it if you are in a hurry.

Video: how to quickly and easily wash tape?

Method 3 - cleaning the surface with white spirit

It removes contaminants very well from any plastic surfaces, including traces of scotch glue, white spirit, as well as special refined gasoline for lighters. If you decide to choose this particular method, you need to proceed as follows:

Important: you must also remember that white spirit, like gasoline for a lighter, can remove not only traces of adhesive tape, but also part of the paint from the surface. After its application, white spots often appear on cheap types of plastic. To avoid this, you need to test the plastic part of the window for sensitivity to these agents by wiping some inconspicuous area with them.

In order to make working with these substances as comfortable as possible for you, be sure to ventilate the room well before and after such manipulation. Also, be very careful when working with such materials, remember that they are extremely flammable.

Method 4 - vegetable oil

How to wash traces of adhesive tape so as not to spoil the window itself? If you don't want to risk plastic, you can use regular vegetable oil to clean it. Anything will do, from regular sunflower to expensive olive. In this case, you will need to work with a spot like this:

You will need to apply the oil directly to the stain. You can also soak a cloth in oil and apply it to the dirt.
Leave the oil on the surface for several hours. During this time, the remnants of adhesive tape treated with it will lose their stickiness, and you can remove them with a regular paper towel.
After that, you will need to wash off the remaining oil with an ordinary soapy solution or a special product for the care of plastic windows.

Important: It may take you a long time to remove traces of oil from the window frame. Get ready for the fact that they may not be cleaned in one wash, and you will need to repeat this procedure several times.

Method 5 - new tape

If you only have painter's tape on hand, you can use that to remove the old duct tape. To do this, you will need to stick a strip of this material over the stain and sharply tear off the tape from this place. If necessary, the procedure should be repeated.

Important: This method works best with fresh stains. If you are going to clean old traces, use a different method.

Method 6 - medical alcohol

You can also use it to clean windows. medical alcohol(be sure to take 95% product). It will allow you not only to solve the problem, how to wash the old adhesive tape from the plastic window, but also to bleach the plastic if it has turned a little yellow. You just need to collect alcohol on a regular cotton swab, wipe the dirt with it, and then remove traces of alcohol with a dry cloth. The whole manipulation will take you only a few minutes.

If you are still unable to remove traces of tape from the window, you can contact a professional cleaning office, where they can help you. It is best to do just that if it turns out that your plastic is deteriorating both from alcohol and under the influence of high temperatures.

When quality adhesive tape is used, it can leave marks that are difficult to remove. If the adhesive residue is not removed immediately, then over time dust and dirt will stick to these areas, which will significantly worsen appearance piece of furniture or clothing. When deciding how to remove traces of adhesive tape, you need to take into account the type of material on which the adhesive remains. When unsuitable cleaning products are used, there is a chance that dirt cannot be removed, and the item itself may even be damaged.

Polymeric materials are one of the most popular today. This means that it is likely that on such surfaces, areas contaminated with adhesive will occur an order of magnitude more often than on metal or wood. For example, plastic windows often leave traces of masking tape. In this case, as in other similar situations, you need to decide how to remove traces of adhesive tape, and it doesn’t matter if it’s regular or double-sided.

Folk recipes

The first thing that comes to mind is the usual cosmetic or laundry soap. In addition, very unusual means are used, in particular, vegetable oil. It copes well with pollution of this kind of alcohol, acetone. If a problem arises, how to remove traces of adhesive tape on plastic, mechanical methods are often used: an eraser, all the same adhesive tape. Learn more about how these tools are used:

Tip: If you plan to use a vegetable/essential oil, do not use strong flavored fats or dyes as this will create new problems.

Ready-made chemical-based detergents

This group includes both universal substances and highly specialized ones, for example, glass cleaners. Both powders and solutions are used. Those products that contain ethyl alcohol are effective. This component does not leave a smell, disinfects and well eliminates the adhesive composition. If the question arose of how to effectively remove traces of adhesive tape, it is necessary to take into account the likely consequences: a change in the color of the plastic, the appearance of scratches, stains or stains. This is due chemical composition special means, especially those that are more aggressive, so they should be used with caution.

Removing tape marks from glass

Glass surfaces in most cases tolerate the effects of detergents well. But you should take into account the degree of abrasiveness of the substance in order to avoid scratches. First of all, it is recommended to use a highly specialized tool - for glasses. If there are more contaminants and they are old enough, solvents, acetone, gasoline are used. However, this solution is not suitable for tinted car windows, as aggressive substances will damage the tint.

It is allowed to use a light abrasive, for example, a thick soda solution. To prepare it, soda is diluted to the consistency of gruel. The mixture is applied to the contaminated surface and left for a short time. This will soften the adhesive from the adhesive tape a little, and you can completely wash it off by rubbing soda solution using a rag. This method is suitable for cases when the question is how to clean up traces of adhesive tape that have appeared recently. Otherwise, this method will be ineffective.

Cleaning furniture from glue

There are several effective ways, allowing you to remove traces of adhesive tape from furniture: sofas, cabinets, chests of drawers, tables, chairs, etc. It is necessary to pay attention to the type of coating: ordinary wood, varnish, thermal film.

Fixed assets:

Thinner, gasoline, alcohol. First you need to check what the reaction will be when the surface of the furniture and this substance come into contact, for which an inconspicuous area is treated and whether changes have appeared. In the case when there is no reaction, you can proceed to the processing of glue from adhesive tape. For this purpose, you cannot use a large number of solvent, as this may cause stains, so it is not recommended to use it on lacquered surface . The substance is applied to a rag, wipe the area where the tape was, and leave for a while. This will soften the glue, then it remains to remove its remnants with a napkin.
Soften contaminants with a heat source. To do this, use either a hair dryer or hot water. When deciding how to wash traces of adhesive tape on furniture, after softening, you can use vegetable / essential oil. In this case, it is enough to rub the area with pollution. The method is suitable for use on varnished surfaces.
Detergent. It is also used after softening traces of adhesive tape.
Eraser. The safest and most versatile option.

Tip: If glue remains on upholstered furniture, it can be removed using acetone. But you need to act with caution, after checking the effect of the product on a small inconspicuous area.

How to remove duct tape from clothes

Adhesives can be removed from woven fabric using just a few of the methods described above. For example, oily substances will not work. On the soft materials they will act differently, only worsening the situation, since not only a trace of adhesive tape will remain on the clothes, but also greasy spot. The most effective are aggressive substances: solvents, acetone, alcohol.

It is necessary to moisten the area with a stain abundantly, for which a cotton pad is used. If a cloth is poured with the substance, the solvent will spread, and the use of a cotton wool moistened with the solvent will provide a direct effect on the contamination. It is necessary to leave the stain to soak for 15-20 minutes, then the cotton pad is removed and you can try to wipe off the glue. From the first time, dirt can be removed only if it is fresh. Otherwise, the procedure is repeated multiple times.

This method gives nice results. However, first you need to study the clothing label. Not all fabrics are allowed to be exposed to aggressive environments and in any case you need to try them on a small, inconspicuous area. In such cases, you need to try to remove the remaining glue using adhesive tape. A small strip is cut off, it is applied to the stain, pressed a little, then sharply removed. This will allow you to remove the remaining tape.

If the fabric is fleecy, the excess adhesive is cut off, scissors cannot be used for this purpose, but special machines are used to remove the pellets. You will have to process the entire product, since the cropped area will look inorganic against the background of fleecy fabric. By trying these methods, you can identify for yourself suitable option taking into account the type of material on which the glue from the adhesive tape turned out.

plus

Adhesive tape is widely used in everyday life, but few people think before using it about the results remaining on the surface of the furniture. After removing the self-adhesive tape, sticky spots remain, which, if not immediately eliminated, attract dust and become dark with dirt. Such marks greatly spoil the appearance of furniture, refrigerators, dishes, car windows, window frames, doors and other household items. It is more difficult to completely wash off traces of adhesive tape from plastic, the more time has passed since the formation of sticky spots.

How to remove tape from plastic

Before removing adhesive tape stains, take precautions so as not to spoil the appearance of products from polymer material. It would be wise to first test the response of the selected remedy to small plot plastic in an inconspicuous place. There are a lot of tools that can be used to wash the adhesive from adhesive tape from plastic without damaging the surface. Both strong chemicals and home remedies will do. Proven ways to remove old adhesive tape stains from a plastic surface:

A strip of new adhesive tape is well removed from the fresh remnants of adhesive tape. During the procedure for eliminating the sticky layer from adhesive tape, they act quickly. The movements during this procedure should be choppy - a piece of adhesive tape is stuck and the glue is torn off with a jerk.
cloth soaked in hot water really, in 3-4 minutes, without effort and harm to the plastic, remove fresh adhesive residue from the adhesive tape.
It is easy to get rid of sticky marks with a household steam generator. The action of hot moist air will help to quickly remove the remaining adhesive tape.
A hair dryer or hair dryer removes both fresh and old stains from double sided tape. To remove such residues, it is recommended to warm up the place of contamination for 3 minutes. After that, proceeding carefully with a flat spatula, in order to avoid the risk of scratching plastic surface, pry off the edge and remove the remaining adhesive tape from the plastic.

How to clean tape marks

Poor-quality adhesive tape does not adhere well, and good adhesive tape is difficult to remove after a while. various surfaces. Most people at least once in their lives have faced the question of how to wash the adhesive from adhesive tape from plastic so as not to spoil the appearance of the thing. The choice of cleaning method depends on the availability of an affordable home, chemical or professional product, as well as on the structure of the polymer material, from the surface of which sticky stains from adhesive tape need to be removed.

improvised means

Wipe traces of adhesive tape from plastic with vegetable oil, optionally sunflower, olive, linseed, sesame or other will do. This tool is the safest for the surface of polymers. Vegetable fat is unrealistic to damage, scratch or discolor plastic. Under the influence of oil, the glue is impregnated and increases in volume, after 15–20 minutes it remains only to remove the contamination with a piece of cloth or paper towel.

To wash off the sticky traces of adhesive tape, alcohol-containing products are suitable. If alcoholic drinks (vodka) are used, they should not contain sugars and dyes. The higher the strength, the easier it is to erase the glue, so medical alcohol is the most effective. They moisten a cotton swab abundantly with it, treat the place of contamination, wait 3–5 minutes and wipe it with a rag. Alcohol has a bleaching effect on polymer products, for this reason it is strictly forbidden to use it on colored plastic surfaces.

Easily and quickly helps to remove traces of adhesive tape from plastic baking soda. To prepare the mixture, a teaspoon or a tablespoon of sodium bicarbonate powder is diluted with water to a mushy consistency. Dip a sponge into the prepared solution and rub the place of contamination with it. After it was possible to clean off the remnants of adhesive tape from furniture, windows or other interior items, the area is wiped first with a damp and then with a dry rag.

An eraser is able to delicately remove sticky traces of adhesive tape from objects made of polymeric material. Rub the place of contamination with an eraser until the glue remains completely gone. At the end of the process, motes are brushed off the cleaned polymer surface. It is easy to erase adhesive tape stains with an eraser if their area is small. Volumetric areas of pollution are very long and difficult to rub off with an elastic band.

Chemical methods

White spirit, which is refined gasoline, has the properties of a mild solvent. For a plastic surface, this liquid is practically safe, but it is better to check the reaction of the coating on an inconspicuous area. Do not use white spirit on painted or polished surfaces of interior items made of polymer material. It is necessary to act on the stain with a swab abundantly moistened with gasoline until complete removal pollution.

Acetone is an aggressive cleaning method for plastic surfaces. The colorless liquid will easily get rid of sticky tape marks, but it can ruin the finish of furniture or other household items. Dull spots may remain on plastic after treatment with acetone. But this organic matter, like nail polish remover, safe for windows, easy and convenient to clean large areas glazing with contamination.

Window cleaner based on ammonia Easily removes adhesive tape marks from plastic surfaces. To eliminate the remnants of adhesive tape, spray the product on the place of contamination and wipe it with a sponge. After dissolving the sticky traces, the treated area is wiped with paper towels. Motorists will be helped to cope with the remnants of adhesive tape on the windows, paintwork made of metal or in the car special agent for car windows.

Vinegar is present in every home, it is often used not only for cooking, but also to cleanse the space. It is also effective for removing sticky marks from adhesive tape. To remove dirt from a plastic surface, it is better not to dilute vinegar with water; in a concentrated form, it will work faster. A sponge soaked in vinegar rubs sticky dirt until it disappears completely. At the end of the procedure, the treated area is wiped with a damp cloth or napkin.

With heating

Glue eats into the plastic surface “tightly”, especially when the stain is old. In the adhesive base, in addition to acrylic, rubber and other foam materials may be present, such as double-sided tape. In such circumstances, before trying to wipe traces of adhesive tape from plastic using various means, the stains are preliminarily softened.

A steam generator, household or building hair dryer. The main thing is not to overdo it, especially when applying professional equipment for heating, so as not to deform the surface under the influence of high temperature. The hair dryer or steam generator is kept at a distance of 15 to 20 cm for about 3 minutes, periodically checking how softened the pollution is.

Special funds

The professional cleaner of adhesive tape residues "AntiScotch" is able to quickly cope with pollution. To use it, the can is shaken for a few seconds and then applied to trouble spot. Wait 2-3 minutes, and then pry off the edge of the adhesive tape and, lifting it, additionally spray the aerosol under the adhesive tape. To clean the remaining adhesive from the plastic, you can use a rubber or plastic spatula. The advantage of this tool is its safety even for painted surfaces.

Mellerud Adhesive Remover Spray perfectly removes even residues double sided tape. A special cleaner effectively removes adhesive stains from all surfaces, including polymer ones. To wipe off the remnants of the adhesive tape, the rag is abundantly moistened with the product and moisten the place of contamination. Leave the solvent for 5-7 minutes and then clean off the remaining adhesive. After completion of the procedure, the treated area is wiped with a damp and then dry cloth.

Citrus-scented Cleaner Scotch-Weld is an all-purpose aerosol cleaner specifically designed to remove any type of adhesive. A clear liquid mixture of petroleum distillates is highly effective in removing adhesive tape residue from plastics. Before use, shake the balloon, moisten the cloth with liquid and wipe the contaminated area. In the case of old stubborn stains from adhesive tape, the procedure is repeated several times.

Video

Scotch tape is necessary and useful thing, often used in everyday life, in construction and other fields. Its plus is in the adhesive base, which is well attached to surfaces, but the minus is in the sticky residue it leaves. Sometimes it can be difficult to wash the tape from a plastic window without damaging the material.

When repairing, filling and painting slopes, it is recommended to close windows, frames and window sills protective film or paper. It is convenient to glue them with adhesive tape, but after completion of work, it is impossible to remove the adhesive tape without a trace. The sticky side is strongly fixed, often comes off in parts. In places where it was possible to remove the transparent fixative, a sticky residue remains. This makes a snow-white plastic window dirty, unattractive.

The above example is one of many options for getting tape on a window frame or double-glazed window. You can clean sticky marks in several ways, using special or improvised means.

When removing contamination, it is necessary to take into account the specifics of the material. Means, methods suitable for removing stains from plastic may not be used for cleaning glass on windows.

From plastic

Rubbing alcohol will help wash off sticky marks. Wet a rag abundantly in alcohol, walk through contaminated places, let the liquid act on the glue for 15 minutes. Then, with the rough side of the sponge, rub the sticky areas until the pollution disappears completely.
Laundry soap is able to cope with pollution different nature and sticky spots from scotch tape are no exception. Soak a sponge with a hard side in water, wring it out well. Then lather it abundantly, wipe problem areas. Soap should be left to act for 10-20 minutes, and then intensively rub the dirt.
Baking soda contains fine cleansing crystals. Areas on plastic with sticky marks are lightly moistened with water and sprinkled with soda. Then, with a rag or a kitchen sponge, you need to vigorously rub the problem areas.
The nail polish remover will cope with fresh sticky stains. It is applied to problem areas, wait 10 minutes and washed with a brush with synthetic bristles.

From glass

acetic acid with water (1: 1) - treated, left for half an hour, then wiped with a sponge (with fresh dirt, you can not dilute with water);
olive or sunflower oil is applied in a thin layer on the adhesive residue from the adhesive tape, left overnight;
orange or lemon essential oil is an excellent remedy for glue on glass, plus a pleasant aroma in the room;
moisten ammonia with a problem area, after 20 minutes, rinse with a clean, damp cloth;
sticker remover HG (sticker remover HG) – special liquid to remove traces of adhesive tape (apply according to the instructions, rinse with a clean rag after 2-3 minutes);
Acetone is able to fight sticky residue on glass or other surfaces, including window frames and window sills.

How to get rid of traces of double-sided tape

Cleaning windows from adhesive tape, which has a foam base and two sticky sides, is sometimes more difficult than removing traces of transparent adhesive tape. The foam base under the influence of temperatures spreads over the surface, absorbing dust. This is due to the significant volume of the adhesive part of the household tape. However, wiping double-sided tape from plastic windows is a completely doable task:

Essential oil of orange. The tool is inexpensive and effective. Sold in a pharmacy or in the cosmetic department. Before use, it is necessary to remove the adhesive tape as much as possible with a spatula or blade. Apply a few drops fragrant oil on sticky residue and leave for 20-30 minutes. Remove the dissolved adhesive with the hard side of the sponge detergent.
"Citrus Glue Cleaner" - effective remedy to remove traces. Manufacturer - trademark 3M. The product is available in an aerosol can and acts as a solvent for adhesives, oil stains, grease, tar and other types of pollution. The composition includes citrus oils, which ideally remove the remnants of adhesive tape, stickers, sticky tapes, stickers, advertising signs and films.
Brake fluid copes with the task of eliminating traces of adhesive tape on plastic surfaces and glass. You can effortlessly wipe the sticky material from the surface by slightly wetting the contaminated area with liquid, waiting 15-20 minutes.
WD-40 is popular with car enthusiasts and workshop workers, and few people know that it is successfully used to remove stains of various nature. This product should be applied to sticky dirt, left for half an hour, then washed off with a sponge or rag.

An overview of popular ways to eliminate traces

Fund types	Description
Mechanical methods	It is impossible to wash off one-piece tape or tape residue from PVC window frames. They need to be removed mechanically. You can use a paint scraper. It is sold in hardware store, looks like a small spatula with a removable blade. In the absence of an ordinary narrow spatula, knife, blade. With a sharp object, carefully pry off the adhesive tape, pull the edge and slowly tear it off the base. An ordinary white stationery eraser will clean the frame, window sill. It might seem that using a double-sided eraser that has a hard part to erase the ink would be more efficient. However best result in the fight against traces of adhesive tape shows the usual gum without abrasive. Under its influence, sticky traces roll down and move away from PVC material. In construction departments, car dealerships, special rubber circles for a drill are sold. They are designed to remove double-sided adhesive tape from the surface of cars. Rubber circles qualitatively remove old sticky adhesive tape residues without damaging the surface. For the same purpose, you can use the fitting from the wheel. It must be clamped in a drill and used as a rubber circle at low speeds.
Oil	Vegetable oil can act as a solvent. If it is smeared with sticky residues on the frame and left for 8-12 hours, after the time has elapsed, the contamination will be easily wiped off with a rough part of the sponge using a detergent.
Alcohol and solvents	Ethyl alcohol 90%, mineral spirits, kerosene-based solvents or refined gasoline can remove sticky residue on plastic window frame. A rag is moistened in a liquid and liberally lubricated the problem area. Allow the solvent to work and wipe with a clean cloth. Old pollution will require more effort and time. The procedure can be repeated several times until the adhesive is completely removed.
Household tools and appliances	The cleaning powder has large abrasive particles and copes well with dirt of various origins. It will help remove the adhesive plastic frame or windowsill. Window cleaner will deal with fresh duct tape stains. It is quite difficult to tear off the old adhesive tape - it quickly tears and is removed in small pieces. In this case, you can warm up the adhesive base with a building or hair dryer. After heating, the adhesive tape will peel off easier and faster, but the sticky residue will still remain. You need to deal with it in the listed ways.

What substances can damage plastic

A building (household) hair dryer heats up to high temperatures, it is dangerous to use it on a frame, a double-glazed window may burst. In the case of a plastic window sill, it should be kept at a distance so as not to harm the material.

If a plastic window sill It has smooth surface, you should refrain from using products that have large abrasive particles, in order to avoid scratches on the gloss.

Given the possibility of installing a cheap PVC variant windows, before using strong acetone-based solvents 646 and 647, it is necessary to check the resistance of the material in an inconspicuous place.

Adhesive tape is a useful invention, without which it is simply impossible to do in everyday life and at work. But this adhesive tape, in addition to many advantages, has one drawback - it leaves marks on various surfaces that are quite difficult to remove.

Tape on furniture

How to remove traces of adhesive tape on furniture without ruining it? There are several fairly effective ways to solve this problem:

From lacquered and polished furniture, glue is well removed with White Spirit solvent or gasoline. But stains can form from these substances and a persistent unpleasant odor can persist.

A safe way to remove traces of adhesive tape is to heat it with a hair dryer. Subsequently, the contamination is wiped off with a swab dipped in vegetable oil. Oil from furniture is washed off with ordinary soap. It does not damage the coating and leaves no marks or scuffs.

Any essential oil purchased at a pharmacy will help remove glue without much effort. The mechanism of action of the essential oil is to disrupt the adhesive properties of adhesive tape. Sticky marks are wiped off with a damp cloth, and the oil remaining on the surface evaporates.

The easiest way to clean the surface of glue is to use a soapy solution and hot water. foam in hot water and wet the sticky place with it. After a few minutes, the remaining adhesive tape is easily removed, and the surface is wiped dry with a cloth.

From upholstered furniture, traces of adhesive tape are removed with acetone. They treat the upholstery, wipe it with a rag soaked in soapy water, and then dry it with a dry cloth.

Tape on plastic

You can remove traces of adhesive tape on plastic in the same ways as on furniture:

Effective means are "White spirit" and refined gasoline. Moisten a cotton swab with the solvent and gently wipe the sticky place with it. It is recommended to pre-test the effect of the solvent on small area plastic.

You can remove traces of adhesive tape from plastic using dishwashing gel or vegetable oil.

With a lot of strength and patience, you can wipe the glue off the plastic with an ordinary eraser.

Baking soda will help solve the problem. It is mixed with a small amount of water until a mushy mass is obtained, applied to a sponge and wiped over the stains. Finally, wash the surface clean water and dry.

You can clean a hard plastic surface with a powder.

Special pencils and liquids allow you to remove the remnants of adhesive tape from household appliances.

Scotch on glass

Some housewives seal the cracks on the windows with adhesive tape for the winter, and in the spring they cannot completely remove it from the glass.

The simplest and available remedy- glass cleaner. It is applied to the sticky area, left for a while, and then the glass is wiped with soft paper.

You can remove the trace left from the adhesive tape on the glass with nail polish remover, alcohol or acetone. The smell of the solvent will quickly dissipate, and household chemicals will not damage the glass.

Universal technical aerosols are an excellent tool for removing glue from glass. Currently, there is a special “Label Remover” on sale that removes adhesive tape well.

Tape on clothes

You can remove traces of adhesive tape on clothes with acetone, alcohol or gasoline. Soak a cotton pad in the solvent and wipe the contaminated area with it.

If the stain does not go away the first time, the cleaning procedure is repeated again. After the glue has completely disappeared, the clothes are washed with any detergent. It is better to refuse the use of vegetable oil, since it will only spoil a good thing.

Before you start cleaning, you need to check all the labels on the clothes to chemicals do not damage the fabric.

When all means have been tried, and the trace of the tape still remains, you can try to remove it with the same tape. To do this, take a new piece of adhesive tape, stick it on the stain and tear it off sharply.