Crafts made from plastic pipes. What can be made from PVC pipes - from furniture to decorations. DIY polypropylene chair

Hello, dear readers! If you take a close look at the objects around us, using your imagination, you can find at least several uses for each of them. It would seem, well, what can be made from PVC pipes, because they are used exclusively for the installation of sewers, in fact this material just a godsend for craftsmen. After all, the most simple pipes PVC can be quite easily and quickly transformed into incredible household items; below we have prepared a whole selection for you current ideas on this topic, and of course, each idea is supported by photos for clarity.

In order for the pipe to be bent or flattened later, it must be heated gas burner, and immediately give the required shape. As a last resort, if there is no burner in the house, you can heat the tubes over the fire gas stove. You can cut pipes with a metal saw or jigsaw, and you can connect all the parts using cold welding(for this you need to purchase a special adhesive composition).

This kind of car trunk can be built from water pipes. A bicycle holder for a car looks no less interesting.

To prevent your child from falling out of bed at night, you can make an improvised side.

This kind of gate can be made on the doorway, so that the child will not be able to leave the room.

By cutting a cylinder of the required length from the pipe and pasting it with a self-adhesive, effective film, you can end up with a wonderful vase, inside of which you can place a glass of water and put fresh flowers.

We cut pipes of different diameters into small cylinders of equal length, glue them together to form a wreath, paint them with suitable spray paint, drill holes on top and thread a rope, hang the wreath on the wall, and put small New Year's balls into several cylinders.

We take pipes of different diameters and cut them into cylinders of the same length. We prepare a canvas, glue cylinders onto it, forming the outline of a Christmas tree, create a footrest from a large pipe, hang the composition on the wall, and put various Christmas tree decorations in different cylinders.

To harden a child, you can prepare such an impromptu waterfall by connecting two hoses with water turned on to the footrests of the product, and making holes for water drainage in the top bar.

Children love to build various houses, huts and other shelters; you can make their task easier by preparing a frame from PVC pipes and sewing a cover from waterproof fabric.

In addition to creating shade, such an awning can also serve as a goal for water polo.

An excellent idea for a street bar, a slot is created in the pipe along the width of the stem of the glass, and holder legs are screwed on top, using which the structure is attached to the ceiling surface.

Such a “stall” for children’s bicycles or scooters will help keep the yard in order.

In large cylinders of pipes glued together you can store bottles of wine.

The drill stand will help you create identical holes in strictly certain places products.

Cats are very active creatures that value freedom, so in confined spaces they begin to waste away. To prevent this from happening, they need to be constantly occupied with something, and this interesting design with slides, ladders and crossbars will help in this matter.

Large holes should be drilled in a PVC pipe using a drill with a special round nozzle, then the pipe should be buried in the ground, and soil should be poured into it, and then planted in round holes strawberry seedlings.

These pipes can make a wonderful stand for forks, knives and spoons.

Pipe sections attached to a wooden plank can serve as pencil holders. And vertically located cylinders can serve as a supply for tools. To prevent tools from falling down, the bottom of the pipes can be foamed with foam.

These pipes can make a wonderful laptop stand, especially since not very many parts are required, just a few pipes and connecting elements. Finally, the product can be spray painted in any color.

Summer shoes can be stored in tube cells, and to make them look more presentable, they can be covered with a suitable adhesive film.

Stores sell special containers with compartments in which you can store linen or other accessories, but you can create such an organizer yourself by simply cutting PVC pipes into shallow cylinders and gluing them together.

From such pipes you can create entire fences or partitions, along which you will subsequently weave climbing plants.

Thanks to such stands, the hairdryer, straightening iron and curling iron will always be in their places. And also, after use, you don’t have to wait for the curling iron or iron to cool down.

To prevent newborn puppies or kittens from wandering all over the place, you can build a small enclosure for them. Well, for more active animals you can create a large, full-fledged enclosure, not forgetting to cover it with netting.

To prevent your garden hose from getting tangled under your feet, you can store it on this excellent stand.

Continuing the topic of what can be made from PVC pipes, we want to show you an excellent seasonal idea for a gazebo. This structure can be covered with an awning on top or light curtains can be hung on the sides, which will now and then billow effectively even with a light breeze.

Fans of watching movies with friends will appreciate the idea of an outdoor screen; its frame can be made from PVC pipes, and the screen itself from the remains of a matte stretch ceiling.

Children will be delighted with this mini bowling alley.

To create such a children's theater, you just need to assemble the frame and hang the curtains.

It will be more comfortable for a child to play in a sandbox if it is raised above the ground, and sand will not get into the baby’s shoes or clothes.

Such a rack will allow you to keep the room in order, as it can accommodate an unlimited number of things and toys.

Rings glued together, cut from PVC pipes, will ultimately serve as a wonderful frame for a picture or mirror.

Lamps made from water pipes look very beautiful, especially if the pipes are decorated with rhinestones or complemented with shaped slots. To realize the idea, a base with a light bulb is installed in a pipe with pre-created beautiful and elegant slots, and with reverse side The product creates a hole for the wire to exit; all that remains is to plug the lamp into an outlet and enjoy the interesting, muted glow.

You can assemble a wonderful table from PVC pipes by covering it wooden table top or build a bench (at the end of the article there will be a video on how to make a bench from such pipes).

Such pipes make excellent garden chairs; smooth lines can be achieved by heating the pipes with a gas burner, using your hands to shape them into the desired shape and leaving them to cool in this state. But even an ordinary geometric chair will look great; the seat can be created from ordinary chintz or cotton fabric. But you can go further and create folding chairs that will be very appropriate on vacation, for example, while fishing.

After repair or construction work there is a lot of material left. Lovers of handmade items will no doubt find a use for them. After repair work In the bathroom, you can easily make furniture from PVC pipes with your own hands, using leftover materials.

Depending on the type of furniture that you plan to make, the set of materials and tools may vary. But basically the following tools will be required for the job:

perforator;
screwdriver;
hacksaw;
scissors or knife.

Materials required for work:

pipe cutting;
glue;
connecting elements of different shapes;
stubs.

To make furniture look more beautiful, paint is useful. Beds, tables, shelves can be painted in the color you like. For beds in the children's room, choose delicate pink, blue, bright orange, yellow shades.

PVC materials

Soldering iron for welding plastic pipes

Variety of types of plastic pipes

Types of plastic pipe connections

Stages of the plastic pipe welding process

Manufacturing and assembly process

Below are the diagrams and drawings necessary for making furniture from pipes. With their help you can make armchairs, chairs, beds, shelves, tables, huge amount decorative elements. The products are interesting, durable and safe.

Armchair

An original way to use plastic pipes is to make a chair out of them. There are many options for making it. It all depends on the desire, capabilities and imagination of the master. Plastic pipelines can become a material for making a chair. You can make it using PVC pipes, a knife and glue.

To get an unusual chair, you need to do the following:

first cut into pieces different lengths. The main thing is that the longest segments should be the same length. They will act as supports;
long ones will be needed for the backrest and armrests;
Then the segments are glued together so that the surface of the armrests and backrest is at the same level. Towards the bottom, the length of the segments changes.

Thus it turns out interesting chair, which will decorate any room in the house. To make it even more comfortable, pillows are placed on it or covered with foam fabric. You can have a good time in such a chair, read a book, watch TV.

The parts under the letter "A" determine the width and depth of the seat. The length of the pipes “B” determines the height of the seat from the ground. Details under the number “C” are the height of the armrests, and under the number “D” the height of the backrest.

Using the method described above, a table and a bed are made. The different sections are glued together to form the base of the bed. On top of it you need to put a comfortable mattress, pillows, and blanket. This is quite suitable place for sleep and relaxation.

In addition, cribs are made from this material. To do this, you need to study diagrams and drawings. Then prepare the required size pieces. They are connected using fittings. If you fasten the parts together with glue, they will be very strong and durable. Without the use of glue, the structure will be collapsible and can be removed at any time. A crib for a baby will be unusual, reliable and durable. If there is more than one child in a family, you can make several beds.

Another option sleeping place for two children from PVC pipes – bunk bed made of polyvinyl chloride, photo. It’s not difficult to make, you only need a drawing or diagram. Following the instructions, you can create various options beds: single or double, bunk.

Table

You can make such furniture from polypropylene pipes with your own hands, like a table. Its frame will be made of pipes, and the tabletop will be made of any other material. At the same time, it must be remembered that PVC pipes are not suitable for heavy loads. The lighter the countertop, the better.

The size of the table top in this case will be 91.5 x 203 cm. You will need following materials, tools:

door leaf as a tabletop;
fasteners for connecting parts;
drill;
saw.

You will also need pieces of size:

30 cm – 10 pcs;
7.5 cm – 5 pcs;
50 cm – 4 pcs;
75 cm – 4 pcs.

To assemble the frame, prepare:

t-shaped fittings – 4 pcs;
plugs for pipes, fittings – 10 pcs;
4-sided fitting – 4 pcs;
cross fitting – 2 pcs.

According to the diagram, assemble the side elements first. Then move on to the back of the table. Pay attention to the stability of the structure. All details must be the same.

The last thing is to assemble all the elements into one structure. Inspect the product for unevenness and sharp parts. Process everything carefully, glue the connections. So in a simple way a table is made.

Tool

Materials

Preparing parts of the required size

Connecting fragments

Rack

Armchairs, beds, tables - this is not the entire list of products that can be made from this material. Another useful item interior - shelving. Design parameters can be very different. It all depends on the size of the room where it will be installed and the wishes of the master.

First of all, it is recommended to make a drawing, a diagram of the future product. Next, prepare for them required quantity a certain size of parts. Connect everything together. The base of the shelves can be plywood or other material. The only thing we must not forget is that the materials are not suitable for heavy loads.

Such racks are used for flowers and toys in a children's room. Shelving can be installed in the garage. There, the products will be a great place to store tools and other things. Can be placed on shelves gardening tools: pots, tools. PVC products look unusual, neat, and do not require additional decoration. Plastic shelves and racks do not harm the health of others, they are durable and environmentally friendly.

The nuances of working with the material

Models made from water pipes turn out to be unusual and original. They decorate the room garden plot. Plastic furniture, made with your own hands, will add zest to the interior and attract the attention of guests.

Furniture is made from plastic pipes. Two types of materials are used in production: polypropylene (PP) and polyvinyl chloride (PVC). Each of them has its own characteristics and is suitable for the production of different products. Polyvinyl chloride is a cheaper material. It is more often used for sewer pipes. Its advantages include:

strength and durability;
ease of installation;
low cost.

The disadvantage of PVC is that when exposed to high temperature water, the pipes begin to deform. In contrast, products made from polypropylene are not subject to change in shape when high temperature water. They are able to withstand liquid heating up to 60 degrees, and even more if the pipe is reinforced.

Both materials are equally suitable for making furniture. In addition, there are a huge variety of items that are made from scraps. These are shelves, stands, mirror frames and more. The furniture is easy to assemble. The structure consists of pipes and fittings, the elements are also glued together. Even a beginner can make pieces of furniture from PVC pipes with his own hands.

How to bend a pipe

Products made from this material look unusual. They will look even more interesting if they consist of curved parts. For example, a table with curved legs. In addition, various decorative elements are made from pipes, which can be different shape. In such cases, bending the pipe is simply necessary.

For this you will need:

funnel;
sand;
scotch;
plate;
metal containers;
gloves;
saw (hacksaw);
knife (scissors);
sandpaper;
a device for bending pipes (there are different types, mostly improvised materials are used).

The process looks like this:

cut a piece of the required length;
cover one end with tape;
using a funnel, pour in as much sand as will fit;
heat a measured amount of sand in a metal container;
put on protective gloves for safety, carefully pour sand into the pipe through a funnel;
Seal the other end with tape, then the sand will not spill out during the bending process;
leave it for a while, it will warm up from the inside;
when it warms up, start bending;
give the pipe the desired shape;
at the end of the work, tear off the tape and pour out the sand;
When the pipe cools down, it will be in the required shape.

One edge of the pipe is sealed with tape

Use a funnel to pour sand into the pipe.

After measuring the required volume of sand, pour it into a metal bowl and warm it well

Using the same funnel, pour the prepared sand back into the pipe.

Cover the other end of the pipe with tape. This is necessary so that the sand does not spill out during work.

Leave the pipe like this for a couple of minutes. During this time, it will warm up from the inside. The material will become soft and pliable.

While the sand is still hot, you can give the cut piece of pipe the bend or shape you need. After this, remove the tape and pour the sand back.

Decoration

One of the options for decorating furniture from pipes is to use different colors material. Table with legs blue will become a bright element in the room. Products come different colors: white, black, blue, blue, yellow. There are also connecting elements different shades. Thus, the pipes will be one color, and the fasteners will be another. Combinations of white and blue or black and red look beautiful.

When it comes to armchairs and chairs, they are decorated with decorative pillows. The foam lining on the back and seat is covered with a beautiful bright fabric. Decorative pillows decorate the product, make it cozy, comfortable, original. They come with embroidery, buttons or tassels. The color range of pillows is varied. When choosing it, you must take into account overall design the entire room.

Children's furniture should be interesting and colorful. It is recommended to cover a chair or high chair durable fabric with a bright pattern. It could be a cartoon character toy cars, dolls, stars and much more. Please pay special attention For furniture made from PVC pipes for children, it must be safe, without sharp elements. Otherwise, the kids may get hurt.

Making furniture from PVC pipes is easy. It will become a highlight in the room and will attract the attention of guests. Plastic pipes are inexpensive, so you can save a lot cash, because new furniture is expensive.

Lightweight summer tent canopy made of pvc

Idea simple lung in assembling and disassembling the sun canopy, which can be unfolded in a few minutes. Two arcs on which the awning fabric is stretched, and a transverse pipe - a spacer. And now you can sit in the shade or take shelter from the summer rain.

Deep watering during drought

In hot weather, it is sometimes pointless to water plants from above, since the moisture simply will not reach the deep roots. By installing a PVC pipe with a drilled holes, you will deliver life-giving moisture directly to the roots.

PVC pipe tool holders

This simple device will help you always keep your instrument in vertical position, convenient to use, you can easily pull out a rake, fork or shovel without experiencing any inconvenience.

Bed with arcs made of PVC pipes

Convenient greenhouse bed, PVC arcs are inserted into wider diameter holders screwed to the corners wooden frame beds. A convenient spring option for a light greenhouse for greenery.

Greenhouse idea made from PVC pipes

However, not only a greenhouse, but even a greenhouse can be made with your own hands from PVC. Using fittings, you can give the greenhouse the required shape and connect all the frame elements together.

Comfortable chairs for weeding made of PVC pipes

Often, working in the garden requires staying in a bent position for a long time, so for weeding, for example, a chair like this will be very useful. The dimensions and height can be adjusted to suit you.

Feeder for chickens made of PVC pipe

Your chickens will always be able to get food, even in your absence at the dacha, if you make these long-term feeding feeders. By pouring food into the cavity of the pipe, you can easily go to the city on business, even for a few days, without fear that your pets will remain hungry.

Device for planting seeds

You can plant seeds without even bending down if you make this original seeder from a PVC pipe. Please note that the seeder has one more advantage - it is incremental, that is, when planting a seed, you automatically mark the location of the next planting spot.

Feeder - milking machine for goats

With this device you can milk and feed your goat. The height of the podium is such that you can milk without bending over, just sitting on a stool.

Aviary for chickens made of PVC pipes

An original aviary for your chickens during the summer period. From time to time, the aviary can be moved from place to place so that the bird always has green grass.

Hose holder

Convenient holder for a garden hose. The device can be stationary or mobile, with wheels for transporting the hose around the site.

Tomato holders

The frame supporting the tomato trunks will become good option for those who grow tomatoes in open ground.

Trellis for cucumbers made of PVC pipes

And this is already an option for trellises for cucumbers growing in the garden.

And here is another version of a trellis that will support the vines of cucumbers.

Tower for growing strawberries

There is a method of growing strawberries in towers made of PVC pipes, covered with soil, with holes in which strawberry rosettes are planted.

Pencil case for country trifles

So that all sorts of little things do not get lost and are always in one place, make a pencil case for them from a PVC pipe with a screw-on cap.

Greenhouse for beds and flower beds

Such a mobile greenhouse can be used to protect young plantings from night frosts. During the day, you can remove it to the beds, or open only the upper part.

Small items holder

An original idea for a holder for various kinds country little things. From short pvc scraps pipes, you can make a stylish design in which small belongings will be perfectly stored.

Rack made of PVC pipes for a summer residence

PVC pipes can also serve you as a basis for a country shelving. Shelves can be made from both wood and chipboard blanks.

Country car

Some homemade products are so original that it’s time to give them an award for originality and convenience. In such a cart you can transport hay, compost, bags, and some kind of garden loads.

Drinking bowl for chickens

Idea of a drinking bowl for poultry made of PVC pipes. Nipples for drinking bowls can be ordered on Aliexpress, where they cost pennies, unlike in stores.

Rack for boxes in the pantry

A spacious rack for storing boxes with things can be made for both the garage and the utility room.

Drip irrigation system for a summer residence made of PVC pipes

The photo shows the idea of a drip irrigation system for a summer residence. You can select the required size of cells, or distribute the pipes in parallel, including flexible hoses from droppers into the system.

Bird feeder

An original bird feeder made of thick PVC pipe. The principle of the feeder is such that the food can be poured in for a long time and the birds will always have the opportunity to have a snack at a convenient time.

Carved PVC pipe lamp

Very nice idea- make a lamp for solar powered from carved PVC pipes. In the evening, the lamp will illuminate the space of the pipe from the inside, and we will observe a floral pattern.

Seedling germinator

The idea behind this seedling germinator is that there is water with nutrients in the pipe.

Roof and gutter cleaning device

By connecting the hose to the PVC pipe extension, you can wash the roof, clean the water drainage gutter, etc.

And in winter, you can use a PVC pole to clear the roof of snow.

That's all I have for today! I hope that these ideas for crafts and devices made from PVC pipes for your dacha and private home will help you in your household!

Plastic pipes are one of the most popular materials for crafts. And this is quite natural: they are publicly available, inexpensive, cutting and installation do not require special skills or special equipment.

DIY crafts made from plastic pipes will look especially harmonious in the countryside. We share a selection of fresh ideas that motivate creative experiments.

1. Water procedures

On a hot day summer day I really want to freshen up at the dacha, quickly and conveniently. A shower made of plastic pipes will help with this. A watering hose must be attached to a plastic structure with holes. All that remains is to turn on the water and enjoy the pleasant coolness.

2. Comfortable seating

The more plastic pipes included in the design of a chair or chaise lounge, the more weight it will be able to withstand. If you need a high chair for a child, then it is enough minimum quantity pipes, and the seat can be made of thick fabric. It is better to make a chaise longue for an adult entirely from plastic.

3. Air beds

Even the most ordinary walls country house, made from nondescript building blocks, will transform hanging flower beds. Even a child can make such crafts from plastic pipes for the dacha. Pipes with holes, plugs covering their sides, and metal fasteners are all you need to make unusual flower beds.

4. Drying things quickly is easy

It’s worth spending a little time and you can make a compact clothes dryer from plastic pipes. Such a product will weigh very little, so it can be easily placed in the most illuminated place on the site.

5. To make strawberries taste better than your neighbors'

It often happens that strawberries grown in the usual way- in the garden, ripens unevenly and can even rot. After all, the sun may not reach one side of it at all, since often the fruits lie on the ground or are under the leaves. Will help solve the problem vertical bed from a piece of plastic pipe large diameter. Strawberries, like a climbing plant, will definitely find a way out - through the holes in the plastic.

6. Plastic fence

Create an external fence separating the street from personal plot, from plastic pipes - perhaps not best idea. But using them to protect an animal enclosure or another area of the dacha is a reasonable decision. To make this mini-fence look like a real one, paint it with silver paint.

7. A fabulous place for friendly gatherings

It is easy to assemble an unusual gazebo from pipes, which will surely become a favorite place for a country holiday. Stretch ropes between the pipes and plant climbing plants, such as ivy, underneath them. When he grows up, it will be pleasant to be in the gazebo even on a sunny day. To make the gazebo look more picturesque, use brown pipes.

8. Efficient watering system

Water the lawn or other large area at the dacha is not the most exciting activity. A garden irrigation system made from plastic pipes will help you get rid of it. Simply run a water hose to several connected sections and turn on the water. If you make the holes small, you will get a drip irrigation system.

9. Simple and mobile greenhouse

Thin pipes become the main material for making a greenhouse. The main advantage of such a garden craft made from plastic pipes is its mobility. At the end of the summer season, the greenhouse can be easily disassembled, and the next season it can be reinstalled in any chosen location.

10. Fencing for the terrace

A small plastic fence for the terrace will show that the owners of the dacha are not expecting guests at this time. In addition, you can make a regular fence from sections of plastic pipes. To make it look more impressive, paint the plastic in a bright color.

11. Flowerbed vertically

Growing seedlings is quite a troublesome task. A flower bed made of plastic pipes will help make this process more organized and convenient. If you spend a little more time, you can supply water to it, and then the process of watering the seedlings will become automated. It is enough to make holes in the bottom of the containers in which the plants are planted.

12. Fun swing

Plastic pipes with ropes holding the swing will become convenient handrails. The manufacturing process for such a swing is quite simple. Eight pieces of pipe with holes, rope and a board are all you need to make them.

13. For lovers of outdoor activities

Active recreation, in which all family members participate, is an excellent option for spending time in the country. Both adults and children will be captivated by the game of football. Finding the ball won’t be difficult, it’s just a matter of looking behind the goal. They can be assembled from plastic pipes. You will also need a piece of any mesh.

Flower stand.

Decorate your terrace or veranda flowering plants - great idea. But taking out a lot of pots and placing them in different places can become a tedious task. A flower stand made of plastic pipes will help solve the problem. It weighs very little, so rearranging it if necessary is very easy.

16. Laconic flower pots

Identical flower pots will make the interior of a country house more stylish and cozy. If you don’t want to spend extra money, you can make them from equal sections of plastic pipe. As a bottom flower pots plugs for PVC pipes protrude. They just need to be put on one of the edges.

17. To feel like a knight

Depending on the type, some pipes are quite easy to bend. This is possible if the product is of small diameter and made of flexible plastic. If you cannot bend the pipe, you can heat it slightly. For example, construction hairdryer or over an open flame.

Made from PVC pipes. Namely, a foam cutter, a hacksaw for metal and a selfie stick. To make these homemade products, the author needed the following tools: an industrial hair dryer, a spring for bending pipes, glue gun, drill, pipe cutters, steel wire, vice.

Foam cutter.
To make the cutter, the author used the following materials: plastic pipe, nichrome wire, power supply, two bolts with a hook, plugs for the pipe, wires.

Having cut the required length of the pipe, the author of the homemade product inserts a special spring inside it for bending the pipes. So that the spring can be easily pulled out, a rope is tied at its ends.

Then he begins to heat the bend with a hairdryer.

It bends the heated area, giving the pipe the desired shape.

The excess length is cut off. Drill a hole in the bottom of the pipe and insert the wires into it. Pulls the black wire into one and the red wire into the other end of the pipe.

Drills holes in the plugs and inserts bolts into them.

Screw the ends of the wires to the bolts and secure them with a nut.

Inserts plugs into the ends of the pipe.

For the homemade product, the author used a power supply with regulation. I put heat shrink tubing on the power supply output wires. Soldered with the cutter wires.

Sliding the heat shrink, I warmed it up with a hairdryer.

I treated the place where the wire enters the pipe with hot glue.

Glues the handle to give it strength.

Between the hooks, with tension, stretches nichrome wire.

The cutter is ready.

Since the power supply is adjustable, by increasing or decreasing the voltage you can regulate the heating temperature of the filament.

Hacksaw for metal.
To make a hacksaw, you need the following materials: PVC pipe, blade, steel wire, two spring washers.
Cuts the pipe to size. Inserts the spring and heats it with a hairdryer. Gives the pipe the shape of the letter C. The distance between the ends should be equal to the length of the hacksaw blade.

Whatever the hand slides on one side makes a handle. From the bend to the end of the tube, steel wire is wound around it.

The ends of the wire are secured in a tense position.

When heated, the tube will try to take its original shape, so the author secured the ends of the tube with electrical tape.

He heats the tube with a hairdryer, simultaneously pulling the wire. Thus, it makes turns over the entire surface of the handle.

The ends of the hacksaw should be at the same level. He trims them with scissors. Makes cuts in the middle at the ends.

Inserts into cuts hacksaw blade. Spring washers are inserted into the holes in the canvas.

The hacksaw is ready.

Selfie stick.
To make a selfie stick the following will be used: steel wire, plastic pipes two diameters, plugs, clamp, bolt.
First, the author makes turns on one side of the PVC tube (larger diameter) using wire and a hair dryer.

On the other side it makes four cuts.

The smaller diameter tube should easily fit inside the larger one, but not dangle in it. A hole is drilled into one end of the smaller tube. Then he heats the end with a hairdryer and gives it a flat shape.

The thread on the bolt should be the same as on the camera. Having cut off a ring from a tube of smaller diameter, he places it on the head of the bolt. The bolt is clamped in a vice. Heating the ring with a hairdryer gives it the shape of a lamb.

Bends a thin tube, at a distance of 8-10 cm from the flat end, at a right angle. A bolt is inserted into the hole.