Do-it-yourself ladder for a frame pool: beautiful and simple ideas. Gymnastic Swedish wall made of polypropylene pipes Do-it-yourself step-ladder made of plastic pipe drawings

The pool has not been so long ago an attribute of luxury. Even today, it is a traditional part of the exterior of quite a few houses outside the city and within the city. The modern market offers such structures in different shapes, sizes and designs. They differ in the type of device and installation method.

However, the pool has a unifying characteristic, which is expressed in the need for a ladder. This applies to both inflatable structures and capital ones. Quite often, home craftsmen today make stairs for swimming pools with their own hands. They have special requirements. For example, the descent should be comfortable and safe, as well as the exit from the water. In addition, the staircase structure should also play a decorative role. Therefore, it is necessary to think about the shape of the stairs at the stage of choosing a pool.

In order to avoid injury, it is important to ensure that the ladder - made of stainless steel or any other material - meets certain requirements. Among them, we should highlight the strength of the material, good illumination of the place of descent at any time of the day, as well as anti-slip characteristics. If you do not plan to purchase a ladder for the pool, it is elementary to make it with your own hands. Then it will have all the necessary parameters.

What to consider before starting work

To date, stair structures for swimming pools are represented by a variety of forms. Along with the usual options, there are steps that go in a circle. You can purchase both screw and rotary designs. Sometimes the owners of real estate, on the territory of which there is a pool, have facilities for descending with slides. This allows you to get a real attraction.

When choosing the design features of the stairs for the frame pool, it is necessary to take into account the shape of the bowl, its features and dimensions. If the pool is not buried, then the best option would be a design that will allow you to climb onto the side and go down into the water. The most suitable material for such a system is metal. It can form the basis of pipes.

If you have a recessed bowl on your territory, then you can make a staircase for the pool with your own hands according to the principle of Roman-type construction. It will look like a closed system with rounded steps. To date, Roman side and stationary ladders are known. The last variety is laid even at the time of planning the pool. The steps in this case are insulated and lined. The material is usually polypropylene, as it has a high thermal conductivity and almost does not slip.

The first steps usually have a large area, due to this, several people can be accommodated there at once. With this design, you can create a real area for children's games and recreation. You can run a ladder in the form of an attached version. This design is attached to the side and quite often located under the plastic stairs.

Manufacturing process

If the stairs for the pool with your own hands will be carried out, then for fastening the parts you need to take care of the presence of a welding machine. You can fix the nodes using fasteners, for example, bolts. However, in terms of reliability, the first option wins. Reinforcing corrugated bars can act as material for steps. They prevent slipping.

The further process of manufacturing the structure requires compliance with some nuances. If you are thinking about how to make a ladder for the pool, you must remember that metal products should be protected from corrosion. To do this, they are treated with a polymeric protective composition. Metal sheets are used for steps, but they are not able to prevent slipping. Therefore, reinforcement acts as the most suitable option.

If you still decide to use sheets, then it is recommended to rubberize them. A channel or pipes are prepared for the frame. This material will be laid on edge, and then steps can be installed with some steps. It is important to pay attention to the evenness of the corners. Steps should be parallel to the floor surface.

Using a welding machine, you can make a railing from a metal corner. At the end of the assembly, all sharp corners are cleaned. Sandpaper will help with this. Once the staircase is made, you can give it a finished look. To do this, with the help of a grinder with an emery wheel, all welds are processed. It is important to pay special attention to sharp corners and protruding parts.

In the manufacture of stairs for the pool, it is important to exclude the susceptibility of the structure to the negative effects of corrosion. For this, products are processed with a special composition. The surface should be degreased, only after that you can start applying the mixture.

After drying, the structure is treated with a primer for metal. On this we can assume that the manufacture of the stairs is completed. The resulting structure can be decorated. To do this, you should use a variety of options. Some paint the product or use elements of the original finish.

Making a wooden staircase

Another great material option for stairs can be wood. The design in this case will be adjacent to the side. To begin with, the length of the boards is measured. For strength, it is necessary to fasten the elements with metal plates and self-tapping screws. Then measurements of the structure are carried out, if necessary, you can correct the material by removing unnecessary ones.

The surface is cleaned with sandpaper. In order to improve the appearance of the product, it can be burned with a gas burner. This will make the texture of the wood more expressive. The boards are fastened in the next step with self-tapping screws, the final step will be the application of varnish. It is worth remembering that wooden stairs for the pool, although quite simple to manufacture, are short-lived. Under the influence of water, they quickly become unusable.

Features of the manufacture of stainless steel stairs

If you still don't know what material to choose for making stairs, you can consider stainless steel. Among its advantages are:

durability;
ease of care;
attractive appearance;
resistance to water and reagents;
ease of installation.

If you will be making a ladder for a stainless steel pool, then it is necessary to lay the anchors at the construction stage. The ladder will be attached to the sides. Fixation can be carried out not only with anchors, but also with special glasses, which are mounted after the construction of the structure and finishing work. Inside the pool, the system must rest against rubber gaskets that will keep the walls from damage and the material from corrosion.

Training

To work with stainless steel, you will need the following materials and tools:

drill;
drill;
Bulgarian;
cutting discs;
felt circle;
nozzle;
screwdriver;
marker;
hex key;
level.

Burrs and end errors can be removed with a nozzle, while a felt wheel will help to polish the surface. Additionally, you should purchase grinding paste. You can make a ladder for a stainless steel pool from pipes, the diameter of which varies from 16 to 50 mm. They will be needed for the manufacture of handrails, racks and strings. According to the number of racks, the required number of tips should be prepared. You will need self-tapping screws 6 x 40 mm, as well as anchor bolts with nuts.

Work methodology

It is necessary to start work with the manufacture of the upper and lower racks. As soon as the desired pieces are prepared, their ends should be cleaned. Tips are taken from a set of components, which consist of a lodgment and a leg. The tip should be put on the rack. The section of the rack will be hidden by a cap. Once the racks are prepared, they can be installed in place.

Fastening is carried out by mortgages with an internal diameter of 25 mm. Before you start making a ladder for the pool, the drawing should be prepared. It will help you understand how to avoid mistakes.

Features of the manufacture of stairs from plastic pipes

If you decide to make a ladder from polypropylene pipes, then 32 mm products should be used as side elements, in which holes of 20 mm are made. Pipes with the appropriate parameters are inserted there. When making a ladder from a plastic pipe for a pool, you will need to connect the side elements to the main lower bearing part. Its diameter should also be 32 mm.

For connection, an adapter is used, which has a right angle. It is possible to strengthen such a structure to the pool wall using brackets. This approach allows you to make the lifting system removable.

Conclusion

The main condition for the operation of the pool is the presence of stairs. The process of its manufacture is characterized by accessibility, since it is not necessary to have special qualifications and skills to achieve the goal. The ladder for the frame pool can be made of different materials, among others, wood, metal, and stainless steel should be distinguished. Some home craftsmen even use plastic pipes.

Practical PVC pipe crafts for home and garden.

A lot of things can be done from PVC pipes, including independently, with due attention and diligence. What exactly it could be, you can see in the new review. Surely, many of these gizmos can be used in your summer cottage.

1. Cornice for curtains

Stylish cornice from water pipes.

Extra pieces of pipes left after repairing the plumbing can be used to create an original and practical curtain rod. It should be noted that both plastic and metal pipes are suitable for the manufacture of cornices. The main thing is to correctly assess the weight of the curtains, since a plastic cornice is unlikely to withstand the weight of heavy curtains.
2. Laptop stand

Bright laptop stand.

Unnecessary pieces of PVC pipes can be used to create an original laptop stand that will protect it from overheating. And to make the stand pleasing to the eye and not look dull, it can be painted in any bright color using spray paint.
3. Shelf for shoes

Shelf-organizer for shoes.

Large diameter pipes are perfect for creating a practical and stylish shoe organizer. And to make the product look attractive, the pipes must first be painted or decorated with wallpaper.
4. Laundry organizer

Practical underwear organizer.

Small pieces of medium diameter PVC pipe can be used to create a practical drawer organizer for socks, tights, panties and scarves.
5. Support for plants

Support for climbing plants.

Thin pipes are perfect for making a simple support for climbing plants in the country.
6. Coasters

Stands for hair dryer and curling irons.

7. Pencil cases

Stands for hair dryer and curling irons.

Plastic pipes and their components can be used to create a variety of hair dryer stands, curling irons and hair curlers.
7. Pencil cases

Utility rack.

A functional rack made of plastic pipes is a budget idea for organizing storage in a garage or pantry.
9. Fixtures

Exquisite pipe lamps.

Creative individuals can try and make unique and very effective lamps from PVC pipes. To do this, the pipes can be painted, decorated with curly cutouts, sparkles and any other materials, and a base with a light bulb can be inserted.
10. Decorative partition

Decorative partition made of water pipes.

Talented and creative individuals can use cut water pipes to make an exquisite decorative partition.
11. Hose stand

Stand for garden hose.

So that a long garden hose does not get under your feet, you can make a simple and practical stand for it from plastic pipes.
12. Bike rack

car bike rack.

From an unnecessary PVC pipe, you can make a convenient bike mount on the trunk of your own car.
13. Bed side

Side made of PVC pipes.

To prevent a child or an elderly person from accidentally falling out of a bed, equip its edges with simple sides made of plastic pipes.
14. Security gate

Security gate made of PVC pipes.

PVC pipes can be used to make low gates that will not allow the child to leave the area that is safe for him and get into the kitchen or stairs.
15. Glass holder

The holder for glasses from a plastic pipe.

A piece of PVC pipe can be turned into an original glass holder. To do this, you need to make a narrow cut along the pipe and attach it to the bottom of the kitchen cabinet or to the wall.
16. Cutlery holder

Charming cutlery holder.

Scraps of PVC pipes left after repairs in the bathroom can be used to create an original stand for spoons, forks and knives.
Video bonus:

Wonderful flower vases.

From the remnants of PVC pipes, very original flower vases are obtained, which can be decorated with the help of original painting, appliqué or decoupage.
18. Hanger

Hanger in the hallway.

PVC pipes and their components, painted in any color, can be used to create an original and practical hanger for the hallway.
19. Bird feeders

Bird feeders.

People who keep chickens, geese or ducks will surely like the idea of creating feeders and drinkers from wide plastic pipes.
20. Clothes rack

Original clothes hanger.

Thin PVC pipes can be used to create a trendy floor hanger - a must-have attribute of an open wardrobe.
Video bonus:

Dozens of options for metal stairs are presented in hardware stores, made mainly of steel and aluminum: light ladders and ladders are made from aluminum pipes, and capital interlevel, as well as external structures are made of steel. The cost of a finished two-meter ladder starts from 2 thousand rubles, interlevel - from 30,000. Meanwhile, a ladder from a pipe with your own hands would cost at least half the price. For its independent production, it is necessary to have welding skills and a sufficient supply of time.

What stairs can be made with your own hands

In addition to side ladders, there are marching (straight and rotary), bolt and spiral stairs. Consider the features of each type:

Attached ladders. The simplest among them are attached, which are two parallel supports, with crossbars installed between them. Such ladders are usually mobile and light in weight.
Marching stairs. Characteristics of this type:
- Mid-flight stairs have a more complex design and consist of beams fixed at a certain level with steps fixed to them.
- A marching staircase that has formed a straight row is called a single-level one, two rows with a span are called a two-level one, etc. A marching staircase from a profile pipe is most often made by the owners with their own hands.
- Stringers (beams fixing the steps from below) or bowstrings (beams holding the ends of the steps) can serve as a support for the mid-flight stairs.

Spiral stairs. Steps in helical structures on the one hand are attached to the central beam, bending around it from the bottom up, and on the other - to the balusters and railings. For the manufacture of such a staircase, a central metal beam is required, as well as wood or profiles for constructing the base of the steps. Such stairs are rarely made on their own due to their unpopularity (these designs are very steep and uncomfortable).
Boltsevye stairs. In this case, the steps are attached to the wall on especially strong bolts - bolts. The free ends of the steps are interconnected by bolts and railings. The principal feature of such stairs is that their installation requires a solid wall on one side. Self-production of such a ladder is possible, but this does not require metal pipes.

Thus, the most suitable for self-manufacturing are the mid-flight and the ladder attached from the pipe. Below are instructions for making them.

How to make a ladder

materials

The manufacture of an attached ladder structure is not difficult even for those who have never held a welding machine in their hands, since the rungs can be fixed to the frame with bolts. However, welded metal ladders made of pipes are more durable and reliable, and their manufacture requires a minimum of materials, the list of which is presented below:

2 profile pipes with a diameter of 40x40 mm and a length of 2.5 meters;
10 pieces from a profile pipe 40x40 mm 30 cm long;
4 square steel plates with a section of 40x40 mm;
20 steel corners;
flat surface (table or two chairs with backs);
primer for metal;

Sequence of work

How to weld a ladder from a profile pipe? Installation of this type of ladder structure will not take much time. Before you start welding parts, you must put them on a flat surface. Mounting in awkward conditions can cause the finished product to be skewed and unstable. The sequence of work is as follows:

It is necessary to lay out two long metal supports at a distance of 30 cm from each other (corresponding to the width of the crossbars).
Then make marks, the distance between which should be 25 cm.
According to the marks, weld metal corners. They should be positioned in such a way that they serve as additional support for the crossbars. You can do without corners by welding the crossbars directly to the frame.
After that, from two long and two short segments, it is necessary to weld a rectangular frame.

Next, the crossbars should be inserted into the frame and welded, laying them on the corners.

Square rectangles should be welded to the ends of the supports so that moisture and earth do not get inside the product.
After welding, the seams should be cleaned with a grinder or sandpaper.

The resulting structure is primed and covered with paint.

On this, the ladder attached from the profile pipe is ready. It remains only to dry it. When making a structure for home use, it is more advisable to take an aluminum profile, as it is very light. If necessary, you can increase the length of the stairs from the square pipe. This will require pipes with a large one: for example, for a 4-6 meter product, a pipe with a cross section of 50x20 mm is required.

How to make a stair frame

materials

Making stairs to the second floor from a profile pipe is a very common way. Such structures are used inside the house (for connecting floors) and outside (for the construction of fire escapes, porches, etc.).

The manufacture of a marching staircase has always been considered the most difficult element of house construction. Even a straight single-march design requires careful mathematical calculation.

To calculate the parameters of the stairs, you can use special programs or perform the calculation manually.

In this case, you should know the following parameters:

the optimal width of the stairs is 80-120 cm;
the optimal angle of inclination is 45 degrees;
height between steps - 12-20 cm;
step depth 25-40 cm;
the number of steps is the quotient of the length of the stairs and the width of the step;
the length of the stringer is the root of the sum of the length and height of the stairs squared;
the calculated load on the stringers is equal to the sum of the steps multiplied by 1.1 and the sum of the weight of people simultaneously on the stairs multiplied by 1.4;
the profile section is calculated by the formula I \u003d 5.2xbxQxL / E (b-step width, Q-design load, L-length of the stringer, E-indicator of elasticity of steel, equal to 2100000).
railing height - 90 cm (for adults) or 60 cm (if there are children in the house).

The initial dimensions of the stairs are determined by the characteristics of the room: its area, height, as well as the location of the stairs and its design. For the construction of a direct single-march structure, you will need:

rectangular metal profile for stringers (length and section depend on the length and height of the stairs and the dimensions of the steps);
metal profile for the construction of a frame under the steps (defined as the sum of the width of the step and the height of the step, multiplied by the number of steps).

In the presence of all the necessary materials and according to the scheme of the stairs, the construction of the frame is carried out. This will require:

grinder or hacksaw;
welding machine and 3 mm diodes;
grinder or sandpaper (grades P100 or L2);
primer for metal;
building level and corner;
cement for concrete preparation;
anchor bolts (2-4 pieces);
paint for metal surfaces.

Sequence of work

The installation process of the ladder frame is carried out in the following sequence:

First of all, it is required to cut pipes for stringers.
Then cut the pipes to create a frame crest under the steps.
After that, the stringers are placed in the right place (their lower ends are preferably concreted or reinforced with anchor bolts; the upper ends are fixed with anchor bolts).
The stringers will serve as a kind of platform, thanks to which the whole structure will be more reliable and stable. When organizing a two-flight staircase, gratings from a profile are additionally installed, which act as spans.
Then the sections of metal-profile pipes are welded to the platform, forming a comb-shaped ladder frame from a profile pipe for steps.

All work is carried out strictly in accordance with the drawing.
Each welded must be located strictly parallel to what is located on the second stringer.
During installation, the angle of inclination of each element should be controlled.
Upon completion of welding, all welds are sanded, and the structure is primed and painted.

This completes the creation of the metal staircase frame. As a base for steps, wooden blanks can be taken, laid in metal frames or bolted to the base. A simpler version of creating a foundation for degrees is shown in the photo below.

You will also find a detailed video instruction on the manufacture of a metal staircase from pipes useful.

A ladder is a functional element consisting of two longitudinal parts connected to each other by horizontal crossbars called steps. The latter are supporting, reinforcing elements that ensure the integrity of the entire structure. Is it possible to make a ladder with your own hands.

Peculiarities

materials, from which the ladder can be made:

wood;
iron;
plastic.

The height of connection that a ladder can provide depends on the ratio of the length of its vertical supports and the load factor that these supports can withstand. The ladder is a portable communication object, which allows it to be used in special conditions: during construction work, in household chores and other similar situations. The constructive nature of this device allows you to make it yourself if necessary.

Advantages

The main feature of the climbing ladder is its mobility. The simplicity of its design allows movement in all available directions. Carrying in most cases can be done by one person. Such a ladder is used for its intended purpose in those situations in which it is not possible to use other methods of support and communication: ladders, scaffolding, and others. The ladder performs its intended function in the presence of minimum conditions. It requires only two upper points of support for the vertical parts of its frame and two lower ones.

Tools

The set of tools required for self-assembly of a ladder is determined by the type of its design and the properties of the material used for its manufacture.

Wooden modification:

sawing tool (hacksaw, electric jigsaw, miter saw);
screwdriver with nozzles (drills, bits);
wood chisel;
a hammer.

Metal option:

angle grinder with cutting wheel;
welding machine (if necessary);
drill with drills for metal.

Assembly of PVC materials:

soldering iron for polypropylene pipes (PP);
pipe cutters (shears for cutting PP pipes);
related tools.

When choosing one or another way of manufacturing stairs, you will need measuring and marking devices:

roulette;
square;
marker, pencil.

Consumables, depending on the type of stairs:

wood screws (size is selected individually);
bolts, nuts, washers;
electrodes;
PP corners, connectors, plugs.

How to make?

from wood

Prepare 4 boards with parameters: 100x2.5xD mm (D is the length corresponding to the height of the future staircase). Prepare the required number of cross bars at the rate of 1 piece for every 50 cm. The length of each cross bar should not exceed 70 cm. Place two vertical boards strictly parallel on a flat surface. Lay the prepared planks - steps on top of them at an equal distance. The ends of the planks should match the edges of the boards. The angle between vertical and horizontal elements must be 90 degrees.

Carefully, so as not to displace the resulting structure, lay the remaining 2 boards in the same way as the first 2 were laid. You should get a "two-layer staircase". Once again check the correspondence of the angle between the parts. Using self-tapping screws, fix the planks located between the two boards at their points of contact. In order for the workpieces not to crack from screwing in the screws, it is necessary to drill a mounting hole for them. To do this, use a drill with a diameter not exceeding the diameter of the self-tapping screw. A minimum of 2 screws are screwed into each point of contact of the planks on each side of the stairs.

This type of ladder is one of the most practical. Its design allows you to assemble a connection device of almost any length and easily withstands the maximum allowable load. For the manufacture, improvised building materials can be used, which can be used for other purposes after dismantling. There is no need to make any cutouts, stops under the slats of the steps and other additional manipulations.

Important! In order to make an attached wooden ladder with your own hands, you need to select materials that do not have structural damage: knots, cracks, cuts and others. It is not recommended to connect two ladders of this type to each other.

metal

For the manufacture of the structure, you can use a profile pipe of square or rectangular section, however, the second option has undeniable advantages over the first. Such a ladder can have several modifications. In the first version, 2 vertical supports of a rectangular profile are interconnected by planks of the same material. In this case, the slats are attached to the supports from the inside of the latter. In the second version, the steps are attached to the vertical parts on top of them. To facilitate the construction, a smaller diameter pipe can be used as cross bars.

By analogy with a wooden staircase, a metal one is assembled by connecting horizontal slats with vertical supports. Using a welding inverter, the workpieces are welded together. Particular attention is paid to the angle between the parts and the strength of the weld. The degree of safety when using the device depends on the quality of these characteristics.

The properties of the metal structure make it possible to equip the ladder with hooks that can hold it in the desired position, a support platform for the feet. The latter can be moved in height. To implement such a modification of the site, its fastenings are made, based on bolted connections, which allow fixing it at the desired level.

PVC pipes

This method of making stairs is the most impractical. Its features are: high cost of materials, low structural strength, assembly complexity. To make a staircase from PVC pipes, you must use the latter with an inner diameter of at least 32 mm. It is desirable that they have internal reinforcement with metal or a temperature-resistant layer. Connections of vertical supports with horizontal steps are carried out using PVC tees.

For the safest possible use of a ladder made of PVC pipes, its height should not exceed 2 m. Otherwise, when a work load is applied, it may undergo structural deformation, which may threaten the life and health of the person who uses it.

In the manufacture of stairs from a particular material, an important role is played by the design drawing. Its presence will ensure the assembly of the best quality.

Operating rules

The ladder is a device that requires increased care during operation. The support for its upper point must be stable and durable. The lowest point of the ladder is installed only on hard and level surfaces. Do not use on soft, slippery, sandy ground.

The angle between the base of the ladder and the point of its upper support must be optimal. The structure should not topple back under the weight of a person, and its lower part should not move away from the support. It is unacceptable to stand on the last 3 steps of a ladder if its design does not provide for a footrest, staging platform or other fixing fixtures.

You can see how to make a ladder in the next video.

- this is already a fairly familiar sight, few people can be surprised by it. Such structures are made from various materials. Popular among country residents and small inflatable models that can be placed for kids. Such a pool does not take up much space, it can be moved around the site, cleaned for the winter. But in order to comfortably use the pool, a ladder is required. Such a design should be not only durable and reliable, but also safe.

Scheme of the pool stairs: 1 - water level; 2 - steps; 3 - equally high handrails; 4 - niche; 5 - ledge for rest (dimensions in m).

A ladder for a pool, erected by oneself, can be installed both for seasonal pools and for permanent ones.

Before proceeding with the manufacture of stairs, you need to understand what requirements apply to it:

the surface of the steps of the stairs must be non-slippery and safe;
it is necessary to place it in a place that is well lit;
if there are kids, it is better to install a small structure separately for them with a smaller distance between the individual steps;
the material of manufacture must be durable and reliable.

Design features

Stairs for swimming pools are very diverse, but in order to choose the right design that is needed, one should also take into account the shape of the pool bowl itself, its dimensions, and the requirements.

A swimming pool ladder can take on many different forms, but for the most part it depends on what the pool itself is like. All designs for launching into the water have steps that can follow each other not only in a straight line (traditional scheme), but also with turns, in a circle. For the pool, you can make a staircase with mid-flight, rotary, spiral. For inflatable and children's ponds, you can install designs with slides for descent, which will be a great gift not only for kids, but also for their rather adult parents.

What form the design of the stairs will take must be determined even before the moment of its construction. Consider the options for using a variety of schemes:

Non-buried pools are recommended to be equipped with such ladders that allow you to first climb onto the side, and only after that go down into the water. In this case, the person turns his back to the water. Such a staircase is often made of metal pipes, it is easy to make it with your own hands.
For an in-ground pool, the so-called closed-type Roman staircase can be used, whose often rounded steps smoothly go into the water. The scheme of this design can be of two options: stationary, mounted together with the bottom of the bowl, and attached. For decoration, decorative ceramic mosaic tiles, special plastic, reinforced with Kevlar thread are used. The first few steps, which are the highest, can mimic a shallow area where you can lie down. Usually they are very wide, if the space is large, they can take up enough space for several people. If you install several nozzles, then such a top platform of the Roman stairs easily turns into an excellent hot tub.
The second type of construction is a ladder, which is mounted after the pool is completely ready. This is a pyramid of steps and handrails, which is simply attached to the side with your own hands. Such ready-made designs are available in various shapes and sizes. These can be stairs for oval, round, rectangular bowls, they are placed at a depth of half a meter to one and a half. It is possible to purchase non-standard models.
For you can install a medical design. This is the so-called balneological staircase. Special nozzles are mounted in the steps of this design, which provide massage of the lumbar region.
For frame, inflatable pools, you can install step ladders made in the shape of the letter “A” with your own hands. Such structures rest on one side on the ground, and on the other side on the bottom of the pool, as if they go around the wall of the pool. They are made of metal, tubes with an anti-slip surface are used for this.
For inflatable pools, special inflatable slides can also be used. Most often they are placed for children's and not very deep bowls.

Back to index

metal models

The board ladder is installed to the edge of the pool without any fastenings.

The simplest and most commonly used option for a pool is a metal structure that is installed at the side. Such a scheme can be assembled with your own hands, using only metal pipes and a welding machine for this. For example, it is not so easy to make Roman steps on your own, except to purchase a ready-made design, which is carefully selected to fit the shape of the pool bowl.

Metal stairs for the pool are most common, with their help you can quickly and easily go down into the water or climb up. Most often they have an emphasis on the upper platform and the bottom, but there are options when the structure is attached only to the walls of the pool. In their form, such structures resemble the letter "A" or "P".

The first option is a metal ladder, for which stability is ensured by resting on the walls of the pool. The second option is a ladder, the mount of which is located on the site. The structure itself is assembled from metal pipes, which are handrails and a frame; pipes or plastic, metal corrugated crossbars are also used as steps. It is quite easy to assemble such a ladder with your own hands from pipes.

For an inflatable pool, a metal ladder must have feet with tips to ensure its stability on the ground. For large pools, mounted models are used. They are simply "put on" on the side, have comfortable handrails. This option is used for pools deepened into the soil.

The width of any metal staircase should not exceed half a meter (for most models), so that it is convenient and safe to use the structure.