How to make snow on spruce branches. Step by step process of making crafts. How to make artificial snow with your own hands: foam snow

Real snow can be brought from the street, put in a bowl and pampered by children. But this magic will not last long, as it will melt in minutes. To decorate a Christmas tree, window sills, candles and other details, you can use artificial snow, which is easy to make at home. In some cases, you can even make snowballs out of it. We have collected for you best collection ways to prepare artificial paraphernalia. Let's consider all the options in more detail.

Candles and talc

For the production of dry snow, prepare glitter (preferably gold, silver, blue or mother-of-pearl). Also put next to kitchen grater, unscented baby talc (powder), a few paraffin candles white color.

Place the candle in the refrigerator for half an hour or in the freezer for 10-15 minutes so that it freezes well. After the time has elapsed, grate it on a medium-sized section grater. To create a shimmering effect, add small sparkles to the shavings (color of your choice).

The resulting composition leaves no residue, does not dissolve in water and does not change shape upon contact with it. As a rule, artificial snow of this kind is used for decoration. Christmas balls and Christmas trees, paintings of windows and window sills.

Styrofoam

The easiest and most common way to make artificial snow at home. To do this, take out a piece of Styrofoam in an appliance or electronics box (they have less pellets). Put the layer on a flat surface, take a fork and begin to drive it intensively back and forth. As a result, the "seeds" will disappear, you need to collect them as you accumulate.

In most cases, foam-based artificial snow looks unnatural. It is used to decorate spruce branches, spruce / Christmas tree itself, window sills, painting balls and filling them, creating small hail and firecrackers.

Paper towels (toilet paper)

Take white paper towels or toilet paper, tear into small pieces. Chop into crumbs convenient way white natural soap, place the composition on the bottom of a ceramic or glass container. Place pieces of paper/towels on top.

Put the bowl in the microwave for 30-45 seconds, keep an eye on the condition of the paper fibers. They should become more fluffy and raised. Soap, in turn, will acquire a softer and more pliable consistency.

After the expiration date, remove the composition, pour in a little filtered water and mix everything with a fork. Place in the refrigerator for 3 minutes, then rub again.

It is from such snow that you can sculpt mini-snowmen, play snowballs, decorate any surface and objects.

Eggshell

Boil a few eggs with white (not red) shells. Clean them, remove the films. Put in tight plastic bag, place on a hard surface and grind with a rolling pin to a powder. When the shell is ready, you can mix it with glitter, and then proceed to the decorations. artificial snow fastened with PVA glue to spruce / Christmas tree branches, they decorate windows, creating various drawings. The composition is used for stuffing transparent Christmas balls.

Baby diapers

No matter how strange it may sound, but artificial snow can be made from disposable diapers or white diapers. The thing is that such attributes absorb moisture due to the sodium polyacrylate contained in the composition. In the swollen state, the preparation looks like real snow.

To properly perform the procedure, remove the cotton-like stuffing from the diapers / diapers. Break it into very small particles, then place in a deep bowl. Start slowly pouring in cold purified water and at the same time knead the resulting mixture with your hands. In the end, you will get a decoration that is difficult to distinguish from real snow. The attribute is used to create snowballs, snowmen, holiday decorations, suggesting the presence of peculiar snowdrifts.

Baking soda and shaving foam

Pour the soda into a small bottle so that it is convenient to mix it with other components. Squeeze a bottle of foam into a deep container and pour soda at the same time, then mix immediately. Act intermittently: poured, mixed, poured again. One bottle of foam accounts for one and a half packs of soda. When mixing comes to an end, send the composition to the refrigerator for 5 minutes. Then take it out and add glitter to decorate. A feature of this method is that the finished snow smells of frosty freshness, if you pick up foam with the appropriate aroma.

Polyethylene

Very often, housewives use pimply polyethylene, which they wrap Appliances during transportation for better cargo safety. Take 1 sq. m. of material, twist it into a tight tube, then grate it with small divisions. Combine the resulting air mass with mother-of-pearl sequins, add 3-5 bags of potato starch and a little filtered water. Knead until the composition becomes homogeneous.

Then dry it on a radiator or under direct sunbeams. Gut a little with a fork, then proceed to the decorations. The composition looks very beautiful and natural on fluffy artificial Christmas trees and natural spruce trees. To properly attach artificial snow, lubricate the area to be treated with PVA, and then sprinkle it with the compound.

Toothpaste

The method is more suitable for spraying on windows, mirrors, balls, a Christmas tree. As a rule, a stencil dipped in water is applied to the surface for better adhesion. After that, the voids are filled with snow patches. It is necessary to spray very carefully, because the drops scatter in different directions. Get the cheapest white toothpaste without colored granules. Squeeze half of the tube into the container, add a little filtered water to make the composition more liquid, creamy. Drop into it toothbrush, direct it to the object you want to process. Run your finger up the stubble and release to speckle the object.

Starch and soap

Grate a fine section of a bar of white soap, mix it with 3 sachets of potato or cornstarch. Boil 200-250 ml. water, pour boiling water into the composition, then beat the mixture with a whisk, forks or a mixer until a thick foam forms.

To make snowballs, take a Styrofoam ball, dip it in the mixture and dry it on a radiator. If you want to decorate windows or branches of a Christmas tree with the composition, just dip a toothbrush in the snow and cover the surface with wet movements. You can dry the mixture, and then knead it if you need snow in powder form.

Salt

very popular in recent times became New Year's wreaths, decorated with artificial snow. Also, many people do not put a spruce, but decorate the room with its separate branches. As a result, you get a kind of frost. To start the procedure, take enamel pan, pour 5 liters of water into it and add 2 packs of table salt. Put the pan on the fire, stir and heat until the composition dissolves. When this happens, turn off the stove, put the branches in the container and wait 4-6 hours. During this time, the salt will be absorbed into the needles and form the original snow crust. At the end of the term, remove the branches and leave them to dry for half an hour.

Edible artificial snow

Experienced housewives pamper their children with artificial edible snow. They can decorate festive table, in particular, New Year's, it is enough just to show imagination and perseverance. To add magic to baked goods, fruit salads or other desserts, it is enough to douse them with airy cream and sprinkle with powdered sugar. For second courses, boiled chicken protein, grated, is suitable.

It is easy to make artificial snow at home if you have it in service. various ways. Use polyethylene, polystyrene, eggshell, toothpaste, a mixture of shaving foam and baking soda, paraffin candles and talc. Treat the kids to edible magic with powdered sugar and cream.

Video: how to make artificial snow with your own hands

If you like to decorate spruce branches, windows, or various New Year's crafts with artificial snow or hoarfrost, these tips will definitely appeal to you. We will tell you about homemade and very budget alternatives to purchased cylinders. Most importantly, it will not be difficult to repeat any of the seven ideas with your own hands, and in some cases, spraying will turn out to be even more durable and durable than the store version.

Stock up on coniferous branches, New Year's wreaths and other paraphernalia - let's start decorating!

Method one: ordinary cotton wool

If you don't want to mess around for too long, this method is just right for you.

What will we need?

cotton wool or cotton pads
PVA glue
tweezers
glitter (optional)

How to do?

Cotton wool needs to be disheveled into small pieces - the smaller, the better. If you use cotton pads, then only the inner, soft part will be used.

We dip each piece in glue for a few seconds and immediately apply it to where we create a coating.

While the glue has not had time to grab, sprinkle the product with sparkles - you get the effect of sparkling snow.

When everything dries, the accessory will look no worse than powdered with ready-made artificial snow.

Method two: foam

Of course, you will have to rustle. If you are annoyed by the creaking of foam, this master class is not for you. And if you don’t care, and you want to get artificial snow quickly, inexpensively and, ultimately, beautifully, you are here.

What will we need?

Styrofoam
grater
PVA glue

How to do?

Styrofoam just needs to be grated (medium and oblong). If he is not himself good quality and simply breaks, then crumble it with your hands into grains.

Now we lubricate the spruce branches (or any other accessory) with glue and simply sprinkle with the prepared material.

The styrofoam sticks to the glue very well and looks really realistic. Especially if you manage to grate "flakes".

Method three: salt snow

If you don't mind a little tinkering, this tutorial is for you. Don't worry, it's easier than it might seem. And most importantly - the result will definitely please you.

What will we need?

salt (take the usual stone coarse grinding) - 1 kg
water - 1.5 liters
blue paint, blue vitriol or ink (optional)

How to do?

First you need to prepare a strong saline solution. To do this, pour the salt into the water and put on a slow fire, stirring constantly. As soon as the water boils, and all the salt has dissolved, remove the pan from the stove.

At this stage, add dye if you want to get artificial blue snow.

We take coniferous twigs (real, not artificial) and immediately lower them into the water: all at once or one after another - it doesn’t matter. A few seconds is enough for the salt to catch on the twigs.

Now we need to take our future snow branches out into the cold. If possible - to the balcony, but better - to the street. If both options are not for you, refrigerate by placing them in a bowl.

After 7-8 hours, we take out the branches and hang them somewhere. You have to let them dry thoroughly.

In a few hours, our "New Year's" branches will be ready. They will turn out to be truly magical and incredibly beautiful. Here, even artificial snow from a balloon cannot be compared!

Method four: sweet frost

If spraying needs to be done quickly, this option will be optimal. Just keep in mind that ready-made twigs should not be stored for too long, because the “snowball” will consist of a food ingredient.

What will we need?

sugar
liquid glue

How to do?

Dilute a little in a container of water liquid glue. In principle, you can not use glue at all, but still it will do a good job for a more secure fixation.

Now dip the branches in this solution, and then take them out and immediately generously sprinkle with sugar.

When the water dries, the sugar will stick to the branches.

There is little trick to make this beauty last even longer. When everything is completely dry, spray the branches with hairspray. True, there is a minus: varnish can extinguish a pleasant coniferous smell.

Method five: fluffy and soft snow from yarn

If you want your artificial snow to be not only beautiful, but also pleasant to the touch, make it from yarn. This method is especially good for those in whose house there are children. The baby is always drawn to snow-covered Christmas trees. So that the kids do not prick themselves and do not touch the chemistry, without which it is simply impossible to imagine store-bought artificial snow in cylinders, replace the decoration with something really pleasant.

What will we need?

several rods (not necessarily coniferous)
scotch
white yarn (it is best to take shaggy and soft "grass")

How to do?

First, the rods need to be stripped of bark. It will be more convenient to work with smooth branches.

We take a thread and glue it to the base of the twig with a thin adhesive tape. Then just wrap the branch to the end. It is not necessary to do this very tightly - let the branch peep through, it's even more interesting.

We also fix the end of the thread with tape.

In this way, you need to wrap all the rods, and then just make up a composition from them.

It would be optimal to make something like a bouquet: “snow-covered” twigs + ordinary spruce or pine branches and cones. If you want something more interesting, you can twist the rods into a wreath (we already told you), adding a few coniferous twigs and various New Year paraphernalia.

This method is in no way inferior to the others. Yes, it looks less like real snow, but it still looks beautiful and very comfortable.

Method six: cold snow from soda

If you want your homemade fake snow to look and feel like the real thing, try this simple recipe.

What will we need?

pack of soda
shaving foam bottle (take the simplest one)

How to do?

No tricks: just pour the soda into a bowl and gradually squeeze the foam into the container, constantly mixing the mass with your hands. The exact proportion is not needed here - it depends on the quality of the foam. As a rule, a whole can of foam takes a 500-gram pack of soda. If you need less, be guided by the touch: as soon as the consistency becomes like wet snow, from which you can make snowballs, our mass is ready.

If you really want to make something out of this "snow" (snowmen, for example), add a little more foam. If you need a loose snowball, you will need a little less.

Method seven: diaper snow

Yes, yes, we will make snow from diapers. The fact is that they contain sodium polyacrylate - a component that cannot be found anywhere else. And that's exactly what we need.

For clarity, we suggest you watch the video master class - it will be clearer.

As you can see, nothing complicated, and the result is really impressive. Perhaps this is one of better ways making artificial snow with your own hands.

All these methods will help you make artificial snow at home. Of the seven master classes, choose the one that meets your requirements for New Year's decor: soft, cold, durable - everyone has their own distinctive features. Whatever you choose, the result should please you, because the snow will help you feel the approach of the holiday and create a New Year's mood!

Reading time: 5 minutes

Don't know how to make artificial snow? We have prepared the top 15 fastest and simple recipes. Artificial snow is almost indistinguishable from the real one!

For crafts with children, interior decoration or decoration festive dishes often you want to create a snowy effect. Artificial snow is sold in bottles and in bulk, but the prices for it are almost like oil. So that the financial side of the issue does not limit the creative side, we suggest making snow yourself.

Recipe #1

Ingredients:
- foamed polyethylene (used as a packaging material for equipment, glass; shoe inserts) or foam;
- small grater.

Work with gloves so that the snow does not stick to your hands. Grind polyethylene or polystyrene on a grater (with a stick, fork). Voila! Fluffy flakes are now all over the house. To make the snow even sparkle, add sparkles.

If you want to powder specific objects with such a snowball, grease the surface with liquid PVA glue. Toddlers like to crush the foam with their hands, watch how it sticks to their fingers. Do not deprive them of this joy, especially since such an activity remarkably develops fine motor skills. If the foam consists of large solid balls, it is not necessary to rub it on a grater, you can manually break it into small crumbs.

Recipe #2

Ingredients:
- leftover dried polymer clay(plastic).

Needlewomen often have the remains of polymer clay, which is a pity to throw away. If you grind it with your hands, and then with a coffee grinder, you get a light and multi-colored (when using colored clay) snowball. Such artificial snow can be used to decorate postcards and other hand-made products.

Recipe #3

Ingredients:
- coarse salt;
- water.

Fill a saucepan with a little water and place over low heat. Add salt until it no longer dissolves. Dip the plants (beautifully curved tree branches, spruce or pine legs with cones) into the hot solution and leave for a day. Sparkling frost is guaranteed! If you add brilliant green, food coloring or ink to the salt solution, then the frost will turn out to be colored! Plants treated in this way look beautiful in winter bouquets and do not lose their attractiveness for a long time.

Recipe #4

Ingredients:
– white baby soap or a candle.

Rub the soap (candle) on a fine grater. If you mix such snow with talc (baby powder), then it is quite possible to decorate a children's craft, drawing. Another option is to use such snow to make toys "a la snowball”, when glycerin and artificial snow are added to the water (you can also use sparkles or finely chopped rain). The container is hermetically sealed and when shaken, the snow falls smoothly to the bottom.

Recipe number 5

Ingredients:
- semolina.

Semolina can perfectly imitate snow on postcards or children's drawings. Apply glue to the place that needs to be covered with snow and sprinkle with semolina. Shake off the rest after drying. Instead of semolina, you can glue crystals of sea salt.

Recipe #6

Ingredients:
- PVA glue;
- shaving foam.

Mix equal proportions of PVA glue and shaving foam. You will get a wonderful airy snow paint. You can add glitter to the paint. With this paint you can draw snowflakes, snowmen, polar bears and winter landscapes. After some time, the paint will harden, and you will get a three-dimensional winter picture.

Recipe number 7

For crafts with kids, you can use torn white paper. This exercise is very useful for motor skills.

Recipe number 8

As snow, you can use cotton pads, synthetic winterizer, foam balls.

Recipe #9

Ingredients:
- sugar.

Dip the rim of the glass (glass) in water or syrup, and then in sugar.

Recipe number 10

Ingredients:
- gum arabic;
- egg white.

With the help of these components, non-poisonous and non-bitter plants can be candied. For example, pear flowers, apple trees, cherries, roses, violets, primroses, lemons, begonias, chrysanthemums, gladioli, pansies. Candied leaves of mint, lemon balm, geranium are obtained beautiful and very fragrant. 12g gum arabic dissolved with constant stirring in ¼ cup hot water(on a water bath). Cool the solution. Prepare sugar syrup: 100 g of sugar in ¼ cup of water. Also cool. On plants, apply with a brush first a solution of gum arabic, and then sugar syrup. Sprinkle with fine granulated sugar (but not powdered). Dry on parchment paper or tracing paper. Such "snowy" beauty will not deteriorate for several months. With these flowers you can decorate a birthday cake or your favorite pies.

Recipe #11

Ingredients:
- egg white;
- sugar.

Beat egg white and sugar until foamy. Apply with a brush to the petals of the plant and sprinkle with powdered sugar. Put the plants prepared in this way on parchment and put in the oven on a small fire. Two hours later you can admire the beauty!

Recipe #12

Ingredients:
- a pinch of salt;
- egg white.

Beat the egg white and a pinch of salt in a steep foam with a mixer. Lay this impromptu snow on the meat and send it to the oven! Surprise your guests with a chicken in a snowdrift! Non-melting frosty patterns on the windows

Recipe #13

Ingredients:
- beer;
- magnesium or urea.

Real frosty patterns can be made on glasses if you apply a solution of beer and magnesia (sold in a pharmacy). Wash and dry the glass. Dissolve 50 g of magnesia or urea in 1/2 cup of light beer and apply to glass. You can use a brush, sponge or cotton swab. When applied, mimic frosty "feathers" and swirls. When the liquid begins to dry out, crystals will begin to appear on the glass, similar to real frost patterns. You can use a hair dryer to speed up the drying of the glass. This solution is easily washed off window panes. You can decorate glass very beautifully in interior doors or on the platform in the entrance.

Recipe #14

Ingredients:
- PVA glue;
- powdered sugar.

In order to write congratulations or draw pictures on glass, you can use ordinary glue and powdered sugar. Apply the design with a brush or stencil and dust with powder. The only negative is that the pattern can “float” if condensation accumulates on the glass. Having decorated the glass with frosty stains, do not forget about the window sill.

Recipe #15

Ingredients:
- water;
- sodium hyposulfite.

Don't let sodium hyposulfite scare you, you can find it in photography stores or chemical supply stores. It is also called sodium thiosulfate pentahydrate (this is a photographic fixer). Dissolve 30–40 g of sodium hyposulfite in half a glass of water and apply the mixture to the glass. Wait for it to dry. The crystals are dense, white, opaque.

Which of the recipes to use - decide for yourself. It all depends on what you need snow for, what effect you want to achieve. Sometimes it’s enough just to scatter (or stick) pieces of padding polyester, cotton pads, paper confetti. Sometimes you need a texture paste or fluffy small granules. Nobody canceled the old proven way of painting on glass with white gouache and toothpaste. In fact, options create for real winter mood weight! Do not wait for "manna from heaven", create a "snowy" mood for yourself right now!

Dear readers! What snow recipes do you know? Have you tried making snow with the kids yourself? Share your tips in the comments.

Today, there are many ways to make artificial snow at home.
1. Making snow from soap

Grate white soap (or a white candle) on a grater and mix with baby powder.

2. Making snow from Styrofoam

On a grater, you need to grate the foam and sprinkle it with branches that must first be smeared with glue. Branches for this can be taken from any tree, and if you add a little glitter to the foam, the snow on the branches will sparkle beautifully. This method can be used to decorate sprawling and large branches. Snow-covered branches can be decorated with anything, such as a garland, bows, balls, etc.
3. Snow from diapers

Having taken a sufficient number of diapers, you will have to carefully cut them with scissors and pour the contents - the same sodium polyacrylate - into a container prepared in advance. For these purposes, you can take a bucket or basin, or get by with a smaller container - everything will depend on how much snow you want to end up with. After the contents of the diapers are poured into the container, you should pour some water into it, mix, and wait some time until the sodium polyacrylate absorbs the liquid. If the "snow" looks dry, add a little more water and mix again. And so on until the contents of the container look like real snow. To make artificial snow look like real snow, not only externally, but also to the touch, just place it in the refrigerator. If the capacity is too large - in the cold. The main thing is that the temperature should not be below zero - in this case, the water will freeze, and our artificial snow will simply turn into ice.
4. Snow from packaging bags (comparison with real snow in the photo)

You will need:
- foamed polyethylene; (material that is used as packaging material for breakable items, as well as inserted into the bow new shoes, to save the shape.)
- fine grater
- scissors.

It is advisable to work with gloves. With a little effort, we get the following result. But if this result does not suit you, you can experiment further. Take scissors and finely cut our snow flakes.
5. Hoarfrost from salt

We will imitate frost with the help of salt crystals. Get real chemical experience, and for the baby - a magical transformation. Salt is better to take coarse grinding, then the crystals will be more effective. Salt crystals can be made colored by tinting the saline solution with ink, green paint, or food coloring.
So. Pour salt into boiling water, let it dissolve completely (proportion: 1 kg of salt per 1.5-2 liters of water). We lower clean and dry branches into the hot saline solution (this is important). We leave to cool. Then carefully remove the branches and let dry. Frost is ready. The method is convenient for small twigs, dried herbs, dill umbrellas, etc. You can grow salt crystals on Christmas tree decorations. "Frost-covered" branches look good not only solo, as an independent winter bouquet, but also in New Year's compositions from coniferous branches.

6. Snow from shaving foam

You need to mix about a pack of baking soda with about a can of shaving foam. By kneading a mass of these ingredients, you will get a cool, snow-like substance, from which snowballs and snows are really molded.

7. Shiny snow

It turns out cold, fluffy and very soft.
Ingredients:
Two boxes of corn starch / corn flour
Shaving gel
Mint extract (optional)
Glitter or mica

8. Snow clay

Ingredients:
2 cups baking soda
1 cup cornstarch
1 and 1/2 cups cold water
A few drops of mint extract
sequins

9. Snow "lizun"

Ingredients:
2 cups of PVA glue
1.5 cups hot water
sequins
Optional: a few drops of mint extract to give the slime a frosty flavor
Mix in a small bowl
In a second bowl, mix
3/4 teaspoon borax
1.3 cups hot water
Combine the contents of both bowls and mix with your hands for several minutes until the mass begins to stretch.

10. Snow paint

Ingredients:
Shaving gel
PVA school glue
Peppermint extract
Glitter

11. "Silk" snow

Ingredients:
Frozen white soap bars (any brand)
cheese grater
sequins
Peppermint extract
Method of preparation - send the soap overnight in the freezer. In the morning, you can take it out one by one (Crystal used 6 bars) and grate it. Fluffy snow will be obtained, in which sparkles and mint extract can be added. It is perfectly sculpted, and you can make a snowman or any other figurine.

12. Snow dough

Ingredients:
Corn starch (freeze overnight to keep snow dough cold)
Lotion (refrigerate overnight to keep the snow dough cold)
sequins

13. "Liquid" snow.

Ingredients:
Frozen cornstarch
Ice water
Peppermint extract
sequins
In the starch that you got from the freezer, you need to add ice water until the desired consistency is obtained. It is recommended to add little by little so that the “snow” does not turn out to be too liquid.
Also, if you've never made non-Newtonian fluids before, you might be in for a surprise. Because with active interaction, the mass becomes harder and more viscous, and at rest it spreads.

14.Snow from polymer clay
Ingredients:
remnants of dried polymer clay (plastic).
Needlewomen often keep the remains of polymer clay, which is a pity to throw away. It is very convenient to grind it with your hands, and then with a coffee grinder. It turns out a light and multi-colored (when using colored clay) snowball, which can be used to decorate postcards and other hand-made products.

15. Polyethylene foam snow
Ingredients:
foamed polyethylene (used as packaging material for equipment, glass; shoe inserts) or foam;
small grater.
We work with gloves. We grind polyethylene or polystyrene on a grater and ... Voila! Fluffy flakes all over your house!!! If you add sparkles, then the snow will also sparkle. You can powder anything with this snow if you first lubricate the surface with liquid (diluted with water) PVA glue.

16. Artificial snow for the "snowball"
Ingredients:
Paraffin candle
It must be grated on a fine grater. Such “snow” is great for making “a la snowball” toys when glycerin and artificial snow flakes are added to the water. The container is hermetically sealed and when shaken, the snow falls smoothly to the bottom.
You can really go the simpler way - and add ordinary sparkles to such a ball. It will turn out no less effective.

17. PVA and flock snow
Flock is a very finely chopped pile. And if you are lucky enough to find a package of white flock on sale - rejoice. After all, now you will get “snow” for any craft in a matter of minutes. It is enough to generously grease the surface with glue and sprinkle flock on top (you can use a strainer).

18. Snow from PVA and starch
Ingredients:
2 tablespoons starch
2 tablespoons PVA
2 tablespoons silver paint
Thoroughly mix (grind) the ingredients.
Such snow is suitable when it is necessary to decorate the surface of the product with a bulky white mass.

19. Mass imitating snow
Ingredients:
small quartz sand or semolina or foam chips
white acrylic
thick PVA
sequins
1. Pour a small amount of your chosen material into a bowl. Approximately 1 faceted glass.
2. Currently bulk material start adding white acrylic paint. From experience it is better to buy it in hardware store for facade works. We add to such a state that our loose particles stick together, but do not float in the liquid.
3. Then add PVA, preferably thick. We also add quite a bit so that the mixture is elastic and viscous.
4. Well, some silver sequins. We mix everything and ... everything !!!

Recipes for edible snow.
1. Sugar snow
Ingredients:
sugar.
Dip the rim of the glass (glass) in water or syrup, and then in sugar.

2. "Snow-covered" plants
Ingredients:
gum arabic;
egg white.
With the help of these components, plants can be candied (non-poisonous and non-bitter). good taste have pear, apple, cherry, rose, violet, primrose, lemon, begonia, chrysanthemum, gladiolus, pansy flowers. Candied leaves of mint, lemon balm, geranium are obtained beautiful and very fragrant. Dissolve 12 g of gum arabic with constant stirring in ¼ cup of hot water (in a water bath). Cool the solution. Prepare sugar syrup: 100 g of sugar in ¼ cup of water. Also cool. On plants, apply with a brush first a solution of gum arabic, and then sugar syrup. Sprinkle with fine granulated sugar (but not powdered). Dry on parchment paper or tracing paper. Such "snowy" beauty will not deteriorate for several months. These flowers can decorate a birthday cake or your favorite small sweet pastries.

3. "Snow-covered" plants - option 2
Ingredients:
egg white;
sugar.
Beat egg white and sugar until foamy. Apply with a brush to the petals of the plant and sprinkle with powdered sugar. Put the plants prepared in this way on parchment and put in the oven on a small fire. Two hours later you can admire the beauty!

4. salty "snow" for meat
Ingredients:
a pinch of salt;
egg white.
Beat the egg white and a pinch of salt in a steep foam with a mixer. Lay this impromptu snow on the meat and send it to the oven! Miracles: a chicken in a snowdrift!
Taken from open internet sources. All rights belong to the authors.

New Year is a national holiday and everyone wants to touch his house. If you are going to make a New Year's composition from fir branches, candles and Christmas tree decorations, decorate the branches with frost.

This will give the composition even more New Year's winter mood.

I offer you several ways to create frost on the branches.

How to make branches in frost?

Making "snow-covered" twigs is very easy

1 Method

Grate the styrofoam or finely break it with your hands. Lubricate the branches with PVA glue and sprinkle with foam.

2 way

This method is more difficult, but the result will inapplicably please you.

It is necessary to prepare a concentrated solution of table salt - 1 kg per 1.5 liters of water. If you want the frost to be colored, then add some ink to the salt water.

Salt is better to take stone, coarse grinding.

Bring the solution to a boil and immerse the Christmas tree branches in it, then leave it in the cold for 5-6 hours (you can take it out to the balcony or outside at night if you live in your house). In the morning, very carefully, so as not to shake off the formed crystals, remove the branches from saline solution and hang them to dry.

After a few hours, you will see branches sparkling with snowflakes. They seem to visit a fairy-tale kingdom ... If you use the same solution blue vitriol, the branches will be covered with blue crystals.

3 way

Soak pine needles in water and roll in granulated sugar. You will get a real winter frost.

4 way

You can also dip the branch several times in molten paraffin - it will turn out like a branch just covered with snow

5 way.

We need ordinary twigs, trimmed from small twigs, and beautiful threads, preferably "fluffy".

At the beginning of the branch, tie a knot and fix it with tape, and then tightly wind the threads around the branch. At the end of the branch, also fix the thread with adhesive tape.

Unusual compositions are obtained. Approximately such

And the easiest way:

buy a can of fake snow and cover your twigs.

And which of the above ways to make twigs in hoarfrost you use is up to you, the main thing is to do it with a good festive mood!