Industrial hair dryers for long-term work in dusty conditions. How to choose a hair dryer: professional advice. Air Volume Adjustment

The scope of application of a hair dryer is quite wide, so it is useful to have it in the house. As a rule, all models of technical hair dryers have an identical design. They are equipped with a durable plastic housing, a ceramic insulator with a heating coil and an electric motor.

Everyone uses a hair dryer differently - most for its intended purpose, but some not at all. Using hot air, they cut roofing material, solder linoleum, soften old varnishes before removing them, process wood and even solder metals. It will come in handy if you need to bend plastic pipes, speed up or slow down the hardening of the adhesive depending on its type. Construction hair dryer comes to the rescue if you can’t remove rusted screws or separate previously glued parts. Several examples of misuse - burning weeds that crawl out between the slabs of paths, accelerating the ignition charcoal in the grill. Regardless of the purpose for which you are planning to purchase this universal device, we recommend that you familiarize yourself with the rating of the best construction hair dryers.

The best, cheapest hair dryers: budget up to 1000 rubles

Sometimes a construction hair dryer is required literally for a one-time use or for some minor work. In these cases, users often choose the cheapest models within 1000 rubles. Devices from this category cannot boast of impeccable reliability and are not equipped with additional functions, but they cope well with their intended purpose.

3 Kolner KHG 1500

Lowest cost
Country: China
Average price: 830 rub.
Rating (2019): 4.6

The cheapest model even in this category. In terms of functionality, it is quite successful - the kit even includes additional attachments. The power of the device is 1,500 W, stepwise temperature control provides two operating modes - at 375 °C and at 495 °C. The maximum air flow is 480 l/m. The device is very convenient to use due to its light weight (0.7 kg) and a two-meter cable. Overheat protection allows you to work long time without worrying that the device will burn out.

The characteristics for the most budget model are not bad at all, but reliability still leaves much to be desired. Many users complain about quick breakdowns even with gentle operation. Therefore, it is better not to use it for serious tasks. If you need to periodically perform minor work, you can save money and give preference to this particular model.

2 Bort BHG-1600-P

Overheat protection, light weight
Country: China
Average price: 960 rub.
Rating (2019): 4.7

For such a low price, the device has good characteristics. It operates in two modes – at 300˚С and 500˚С. There is no smooth temperature control, only stepwise. The air flow is also adjustable from 240 l/min to 420 l/min. The manufacturer provides protection against overheating so that the hair dryer does not burn out during operation. The power is quite high for a budget model - 1,500 W.

Judging by user reviews, this is a surprisingly successful model. When dealing with cheap Chinese products, the possibility of defects cannot be ruled out. Therefore, they meet negative reviews, which talk about the “crooked” assembly, low quality plastic. But more people are satisfied with a simple budget device and consider it quite reliable. Many people like the light weight of the device - 0.7 kg. But the most important advantages are completely normal performance at a minimal price.

1 SOYUZ TPS-18002

Best in its price category
Country: China
Average price: 990 rub.
Rating (2019): 4.9

A fairly powerful hair dryer (1800 W), which can be used for most household work - welding, removing old paint and varnish, drying glue. The set includes two attachments for different tasks. The nozzle is made of heat-resistant alloy. The adjustment is stepwise, there are two operating modes in total - at 375 °C and at 495 °C.

Users write that this is the best that can be found within 1000 rubles. The hairdryer is not very loud, fits comfortably in the hand, blows well and warms. It performs its functions perfectly - a good option for the home. Lightweight, compact, but the cord is short - this is considered a disadvantage. The thermal protection switches on after about 20 minutes, after which it takes about 10 minutes to cool down. If you follow the manufacturer's recommendations for use, a cheap Chinese technical hair dryer will last quite a long time.

The best inexpensive construction hair dryers: budget up to 3,000 rubles.

Often a technical hair dryer is simply necessary at home. It is used to clean surfaces from old finishing materials. In this case, it is enough to have an inexpensive standard model, which contains a fan and a heating element. No additional properties are needed for homework.

3 ZUBR FT-1600

Best value for money
Country: Russia
Average price: 1,590 rub.
Rating (2019): 4.7

The construction hair dryer Zubr FT - 1600 is used for non-contact heating (blowing) of open surfaces consisting of various materials with hot air. The device is different good quality assembly in relation to low cost. It has an ergonomic body equipped with anti-slip inserts. Thanks to them, the tool is held securely in the hand and does not slip.

The device copes with its tasks perfectly. It has several modes and easily removes paint from both flat and shaped surfaces. The hairdryer heats up quickly, and it is possible to regulate the air flow and temperature. The downside is that the kit does not come with a case to store the tool, but it does have attachments. Additional advantages are a 2-year warranty and the ability to use a construction hair dryer, both stationary and manual.

2 INTERSKOL FE-2000E

Best in reliability
Country: Russia
Average price: 1,890 rub.
Rating (2019): 4.8

The device is perfect for home use. By the way, the instructions say: “Not for professional use.” However, the hair dryer can easily cope with wide range works Some people use it to repair cars at service stations. For greater reliability, the heating coil is protected by ceramic insulators.

The kit includes a storage case and several attachments. Perhaps the only downside is the thermostatic temperature control. Although the adjustment itself is smooth. Using the device, you can easily heat a lock or pipe or heat something. The tool can be used in vertical position. The Interskol construction hair dryer entered the rating thanks to its good build quality and pleasant appearance and quality characteristics.

1 METABO H 16-500

Wide spectrum of action. Safest to use
Country:
Average price: 2,890 rub.
Rating (2019): 4.9

The most multifunctional of the inexpensive construction hair dryers is the Metabo H 16-500. The tool is equipped with a high quality ceramic heating element. Thanks to optimal system cooling hair dryer has long term services. Its motor power is 1,600 W, which contributes to an expanded range of applications for the device. It can be used to shape, remove varnish coatings, squeeze and cook.

Thanks to the ergonomic design and anti-slip surface of the handle, the hair dryer is convenient to use. The handle has an elastic Softgrip pad. There are no attachments included, but this is not a significant drawback. But there is a large non-slip support surface that ensures safe stationary use of the hair dryer.

The best construction hair dryers in the mid-price category

Next category of hair dryers suitable for people doing delicate professional work. As a rule, such models have smooth temperature control so that you can easily set a convenient operating mode. Models from the “more expensive” series can be used to perform professional tasks, but they are a bit expensive for home use.

3 MAKITA HG551V

Wide range of applications
Country: China
Average price: 5,350 rub.
Rating (2019): 4.8

The well-known brand Makita presents the multifunctional construction hair dryer HG551V, designed for professional work. The hair dryer contains two operating modes, thanks to which you can set the optimal heating temperature in accordance with a specific task. The tool has a wide range of applications. This includes welding, drying stucco, putty, glue, forming parts, and softening old varnish or paint.

Makita HG551V boasts high quality materials manufacturing and quality assembly. He copes with the assigned tasks “excellently”. It is distinguished by its lightweight design and compactness. The device comes with 3 attachments. The tool is held securely in the hand thanks to the rubberized handle, preventing slipping.

2 BOSCH GHG

Convenience and ease of use
Country: Germany (produced in Romania)
Average price: 8,890 rub.
Rating (2019): 4.8

Quite a powerful construction hair dryer from BOSCH. Its power is 2300 W. Supports 4 program mode options, which allows you to quickly adjust the temperature and speed for a specific type of work. For convenience, the manufacturer equipped the device with a liquid crystal display and minimal weight, only 0.97 kg. The air temperature during operation reaches 660 degrees, the air flow speed is up to 500 l/min.

The package includes 2 replaceable nozzles, a glass-protective nozzle 75 mm and a flat nozzle 50 mm, a suitcase for storing and carrying the tool. The model is not intended for long hours of operation. This is perhaps the only negative. Important feature The tool is equipped with a removable filter and 2 positions for adjusting the intensity of the air flow.

1 DEWALT D26414

Complete security
Country: China
Average price: 6,190 rub.
Rating (2019): 4.9

Without a doubt, the DeWalt D26414 is the best professional tool in the middle segment. The device is equipped with a display for monitoring performance, three nozzles, and ventilation for engine cooling. This protects the device from overheating. Three-position switch: off, 250 l/min, 500 l/min, provides easy air flow control. The model is capable of remembering temperature settings.

A distinctive feature of the hair dryer is complete operator safety during operation. Maximum temperature limits apply according to different air flow levels. The closed handle makes it possible to grasp the tool tightly and avoid slipping out of your hands. For stationary use, folding stops provide stability. All this ensures complete safety.

The best professional construction hair dryers

The choice of a construction hair dryer is determined by the purpose of use. If you have to perform a number of significant amounts of work, you should pay attention to professional models. They are highly powerful, have special attachments and additional important characteristics.

3 Rupes GTV20LCD Case

Possibility of creating own programs work
Country: Italy
Average price: 18,200 rub.
Rating (2019): 4.8

A professional Italian construction hair dryer copes with a wide range of tasks. It can be used to remove paint, dry plaster, and shape acrylic panels and plastic tubes. It is used for heat shrinking, packaging, applying adhesives and much more. Power is 2000 W, operating temperature is from 80 to 650˚С. The model is equipped with an LCD display for monitoring current operating parameters. The manufacturer provides 12 programs, plus two more programs can be created independently by selecting the parameters necessary for operation.

For safety and ease of use, a standby mode and a cooling function are provided. The hair dryer comes in a plastic case with a set of attachments different sizes and forms. According to user reviews, the hair dryer is easy to use, lightweight, and easy to operate. The handle does not slip in the hand due to rubber inserts. The device performs well during long-term use - it does not break down, does not overheat.

2 LEISTER TRIAC ST

Perfectly balanced design and functionality
Country: Switzerland
Average price: RUB 29,887.
Rating (2019): 4.9

The Swiss construction hair dryer LEISTER TRIAC ST is considered one of the best. Air filters are located on both sides. They are easy to remove and clean, ensuring big flow air. Safety of working with the tool is achieved through automatic shutdown carbon brushes to protect the heating element and commutator.

An important fact is the reliability of operation and ease of control of the construction device. More than 80 attachments are suitable for LEISTER. Increased operational reliability is created by a protective tube with active cooling. The design of the device is ideally balanced, has a two-component handle - the tool lies securely in the hand and provides optimal level work even in difficult conditions.

1 STEINEL HG 2620E

Flexible temperature adjustment. High power
Country: Switzerland (made in Romania)
Average price: RUB 25,630.
Rating (2019): 4.9

STEINEL HG 2620E is one of best models professional level. Thanks to its high power of 2300 W, the hair dryer creates a strong air flow (150-500 l/min). At a total pressure of 4000 Pa, the engine life is 10,000 hours. The hair dryer has a liquid crystal LED display to visualize control of device parameters. The device operates at temperatures up to 700 degrees, the adjustment is stepwise, using a joystick. The step is 10 degrees.

The construction hair dryer is equipped with a ceramic heating element, which indicates its durability. Thanks to the built-in protection system, the device will never overheat. A 3-meter long cable and a weight of only 0.84 kg will allow you to easily move the device in space. Hairdryer suitable for performing various types works (has 4 options for customizable parameters). An important feature is that the tool motor does not need frequent maintenance. All STEINEL HG 2620E electronics have a fine air filter, which makes them protected from dust.

Options for choosing a hair dryer

Choosing a hair dryer is not so easy; it is important to pay attention to a number of characteristics, namely:

Power, which affects the performance of the hair dryer and the temperature of the supplied air. The maximum power of construction hair dryer models reaches 3600 W. Minimum – 800 W. As you can see, this indicator is closely related to the other two, so when choosing, you need to be guided by the aggregate data (paying attention to both temperature and performance) in accordance with the purpose of using the tool.
Maximum temperature. It can be different, from 50 to 800 degrees, and depends on the tasks. For example, if you need to do some simple homework(take off old paint), then you need to choose a hairdryer with low settings, from 50 to 450 degrees. If soldering or welding is required, you should give preference to higher temperature conditions.
Performance - determines the volume of supplied air, for example, 250-600 liters per minute.
Weight and dimensions. The lighter and smaller the hair dryer, the more convenient it is to use.
Possibility of adjusting the temperature and volume of supplied air. Adjusting indicators is usually necessary for professional work, when precise adjustment of the operating modes of the device is required.
System for maintaining the set temperature.
Availability of indicator, filter, thermal protection. The indicator allows you to visually monitor the instrument settings. Filters protect the hair dryer from dust, and thermal protection protects the device from overheating.
Attachments - increase the functionality of a hair dryer.

It is also worth paying attention to the shape of the handle, its type and the method of parking the tool.

A construction hair dryer, the characteristics of which will be described below, is a tool designed for welding linoleum, melting soft tiles and cutting roofing felt, etc. If you decide to choose such equipment, you should know its characteristics and the main factors that you should pay attention to .

Features of a hair dryer

A construction hair dryer, the characteristics of which you should study before purchasing the unit, is used for drying putty and glue, tiles or stucco, as well as joints of materials before laying insulation. It can be used to remove excess paint or varnish, wallpaper, parquet or tiles from the surface of furniture, floors or windows. To do this, you will need to stock up not only with the described tool, but also with a spatula-scraper.

A hair dryer is used to form polystyrene polyvinyl chloride products (at an exposure temperature of 300 degrees). If you provide a temperature of 500 degrees, you can also work with plexiglass, as well as acrylic. Excellent performance with rods and pipes made of polyurethane.

A construction hair dryer, the characteristics of which should be known to the consumer before going to the store, will help defrost icy locks, pipes and drains, removing ice from wires and steps. Using this unit, you can disinfect wood, eliminate microorganisms, bugs, and destroy anthills that are built in a blind area or a stone wall. With its help, you can glue various large parts using contact hot melt adhesive.

Among other things, a hair dryer will help speed up the setting of two-component compounds, remove PVC-based stickers, and also allow you to remove a screw that was secured with glue. Construction hair dryer, the characteristics of which may vary depending on different models, will allow soldering and pressing and will provide the necessary shrinkage to the hoses and handles. Using this tool, you can overlap weld elements of polyvinyl chloride film, as well as tarpaulin.

Individual pieces floor coverings can be welded together if they are made of PVC.

Specifications

If we look at the designs, they are practically no different from each other in this regard. An insulator made of ceramic, together with a heating element in the form of a spiral, which is located in the insulator, are located in a fairly durable plastic case that can withstand high temperatures. In addition, the unit has an electric motor equipped with one or two impellers. The motor operates at fairly high speeds.

If you decide to choose the tool described, then it is important to take into account the maximum temperature that the air stream it produces will have. The maximum temperature for most models is 650 degrees. However, you can also find more powerful units on sale, in which this parameter reaches 800 degrees. The performance of the device is determined by the volume of air that is passed through the heat gun per a certain amount time. If you have a middle-class model in front of you, then this value will vary from 200 to 650 liters in one minute. The parameter is associated with As temperature and productivity increase, the tool will have a greater range of capabilities. Its power is determined by the power of the fan and coil. Power can range from 500 to 2500 watts. If you want to choose equipment with a power of more than 2000 watts, then you need to be prepared for the fact that the unit will be quite heavy, bulky and expensive. For home use quite suitable model, the power of which does not exceed 2000 watts.

Air Volume Adjustment

The construction hair dryer, a photo of which you can see in the article, has one very important indicator, which serves as an adjustment to the volume of injected air.

Not all models are equipped with this functionality, but it can be extremely useful if overheating of the entire surface is undesirable. This function is also used if a fairly light part is to be subjected to air treatment, which can simply be blown off too much. strong flow air.

Heating temperature

If you choose a hair dryer, a photo of which you can see in the article, then it is important to consider whether the tool has the ability to adjust the heating temperature. This parameter allows the technician to adapt the unit to work with different materials. If you have hobby-class equipment in front of you, then the adjustment will be carried out in stages. As for construction models, their adjustment is smoother. With the help of such a unit it will be possible to work with any material, even one that is very difficult to process. If you still need such functionality, then you can choose an adjustment method, which can be slider or electronic.

Temperature maintenance system

Before choosing a technical construction hair dryer, you need to pay attention to the presence of a system for maintaining a certain temperature. Otherwise, this parameter is called stabilization heat flow. It runs on electronic circuit and allows you to maintain a certain temperature of the discharge air. This functionality saves the heating coil from rapid wear. Most often, manufacturers provide such devices with a memory that remembers a certain temperature until the next time it is turned on. As experts note, working with such equipment is faster and more comfortable. However, as a rule, these are professional models that are quite expensive. For those craftsmen who choose a tool to solve everyday problems, most likely, such a unit will not work.

Using cold air

Before choosing a hair dryer for home use, you need to think about whether you need functionality that involves the ability to blow cold air. This parameter may be sufficient big advantage. For example, after the joint of plastic-based pipes has been cooled, the manipulation period can be shortened. In this case, the technician will not have to wait for the hot spot to cool down on its own. When choosing a similar model, you should take into account that different options can provide cold air in different ways. This can be done by having another nozzle or turning off the spiral. The first method is more modern, while the second allows you to cool the coil for a short time after work, when the unit is already folded and packed. Among other things, the presence of another nozzle, which provides the supply of cold air, allows gluing thermoplastic surfaces - while the first nozzle heats up, the second one cools the surface.

Incoming air filter

Before choosing a hair dryer for your home, you need to consider that the tool may have a special filter designed for incoming air. If you will use the equipment in places where there is a lot of dust, then this option is very useful. Once inside, contaminants can quickly damage the coil. Whereas if the air passes through the filter, then this problem will not arise.

Control indication

If delicate work is being done, insufficient or excessive heating can damage the parts. In this case, it is necessary to constantly monitor the temperature of the discharge air. The control indication can be carried out using a small screen or LED backlight.

Overheat protection

If you choose a construction hair dryer, you should study the characteristics and reviews of a particular model first. Remember also that it is important to choose a model that provides protection against overheating. This function is also called a thermostop and is designed to remove the thermoelement from the operating state in case of overheating. This can happen when it is necessary to work perpendicular to the surface of the material. The air goes to the base, then is repelled, influencing the spiral. This can cause the unit to overheat.

A hair dryer is similar to a regular hair dryer that gives off warm air. Only it is many times more powerful and is used during repairs and construction.

With it you can:

produce synthetic wall finishing;
remove stickers;
remove vinyl coverings;
remove coatings containing varnish or paint;
peel off carpet tiles based on synthetics;
do heat shrink treatment;
soften or melt resin, solder, bitumen, wax;
solder thin-walled copper pipes;
create a mold from plastic and plastic pipes;
weld PVC film;
bend a wooden piece;
get rid of air spots when gluing films.

Design and principle of operation of a construction hair dryer

The design includes a ceramic insulator, inside of which there is a heating mechanism - an air heating coil.

A powerful electric motor is inserted into the housing, which blows warm air from the coil outward and ensures not only performance, but also protection from overheating.

It works like this:

when you plug in the tool and start it, the filament turns on;
with the help of an electric motor, air is sucked in, passes through the spiral and is blown out;
Depending on the power, the degree of heating of the spiral, and, consequently, heating of the air, is regulated.

How to choose a hair dryer

To choose the right tool, you need to decide exactly where and what you will use it for.

Construction hair dryers are divided into two types: professional and household (regular). The first has switches for operating modes: minimum, medium and maximum.

But it is better to choose devices where you can independently set a certain degree.

When choosing, you should pay attention to overheating protection. The function will avoid tool breakage in case of long work.
A heat shield would also be helpful. It is better if it is of high quality and removable.
You should also pay attention to the handle, which comes in two types: open and closed. The second type provides better security and ease of use.

The best cordless construction hair dryers

This type often runs on lithium-ion batteries. Operating temperature around 300-500 °C. Output power is about 300 watts. A cordless hair dryer passes about one hundred liters of air per minute.

It is suitable for home use and short-term work in hard-to-reach places.

Comes with the device charger, several attachments and instructions.

Pros:

convenient to use in rooms where there is no ;
use in hard-to-reach places;
small sizes.

Cons:

short duration of use;
rapid battery wear;
difficult to find a suitable battery;
weak power.

The cheapest rechargeable hair dryer today is the Steinel BHG 360 Li-Ion. It operates on 12 volts in a temperature range of 400-500 degrees.

More high quality model– Einhell BHA 2000/1 with the same parameters. In third place is Zenit ZF-2000-1.

The best construction hair dryers for concrete

Used for working with concrete coverings, drying and removing paint coatings. This type operates on a 220 volt network. Power consumption is about 1600 W.

It passes approximately 550 liters of air per minute.

The package includes the tool itself, a set of attachments, and instructions.

Pros:

performing large amounts of work;
fast heating of the heating mechanism;
performing work related to concrete.

Cons:

high electricity consumption;
inconvenience to use;
the need for an outlet.

The cheapest instrument of this type is considered to be Vitals Tf 202JSc. Operates from the network, has 2 temperature settings at 350 and 550 degrees. The next most expensive is the Steinel HL 1610 S. And in third place is the similar model Steinel HL 1910 E.

The best construction hair dryers for soldering

On such models there is a temperature regulator with precise adjustment, the air flow is directed, without spraying over the entire area. They can work both from a battery and from a network. The operating temperature reaches 300 degrees.

Pros:

ease of soldering of plastic structures;
smooth adjustment of the thermostat;
accuracy in the direction of air flow;

Cons:

small range of work performed;
low air temperature.

One of the cheapest tools of this type is FORTE HG 2000-2 with a power of 2 kW and maximum temperature 600 degrees.

The second most expensive with the same temperature and power characteristics is Storm. Third place goes to Energomash TP-20002 with a capacity of 2.5 kilowatts.

The best construction hair dryers for welding linoleum

Operating temperature ranges from 100 to 650°C. Tools consume one and a half kilowatts, which is quite a lot. There are also 4 kW models that are considered professional. The equipment is standard.

Pros:

high glow temperature;
longevity in work;
large spray area;
large selection of welding attachments.
Convenience in precise work.

Cons:

high energy consumption;
not suitable for fine work.

The most affordable tool is Belarusmash 2200. In second place is Russia 2500, it is slightly more powerful, but also more expensive. Third place goes to URALMASH BT2500.

The best construction hair dryers for roofing

It is characterized by specific attachments that improve the quality of the roof. Has from 2 to 5 temperature settings. Power consumption is 1600 W, runs on mains power.

Pros:

low electricity consumption;
three air temperature modes;
The functionality is completely suitable for the roof from the beginning of work to the end.

Cons:

short duration of continuous work;
not suitable for other types of work;
lack of smooth change in operating temperatures.

One of the cheapest representatives of this type is Intertool DT-2416 with a power of 1500 kW and a temperature of 300 degrees. In second place with the same parameters is Vitals Tf 202JSc. Metabo H 16-500 took third place.

The best construction hair dryers for paint removal

This tool is the simplest and without any special customizable elements. There are two types of attachments for removing paint and varnish coatings.

The temperature of the blown air is 100-300 degrees. The power consumption of such devices reaches 1500 kW per hour.

Pros:

performing fast and high-quality work on removing paint and varnish coatings;
possibility of drying materials;
low power consumption.

Cons:

small functional set;
requires additional protection when working with paints and varnishes.

The cheapest model of this type on the shelves is Steinel HL 1400 S, with a power of 1500 kW and a temperature of 300 degrees. The second cheapest is the Steinel HL 1610 S. And the third place is occupied by the Bosch PHG 500-2.

The best construction guns for welding PVC

This type of construction hair dryer has a wide temperature range with smooth adjustment. The power of this construction tool reaches 4 kilowatts per hour. The tool kit includes instructions and a set of attachments for welding and other work.

Pros:

multifunctionality;
smooth adjustment of the temperature of the blown air;
large set of attachments for different types activities.

Cons:

high electricity consumption;
short duration of work.

The best construction hair dryers for sound insulation

This type of construction hair dryer is characterized by high precision and smooth temperature control. Power consumption – 1 kW.

Pros:

smooth adjustment of air temperature;
air supply accuracy;
low electricity consumption.

Cons:

used for a small number of side jobs;
limited set of attachments.

The best construction hair dryers for tinting

Tools of this type are comfortable to use and reliable. They have low power consumption and a set of attachments for small jobs.

Pros:

a large number of high-quality attachments;
low electricity consumption;
precise adjustment of the temperature of the blown air.

Cons:

not intended for large works;
difficult to find a replacement battery;
short-term operation to avoid damage and overheating.

One of the cheapest models is HL 1400 S. The next one is Steinel HL 1810 S. In third place is Makita HG651CK.

The best construction mini hair dryers

Mini hair dryers are remarkable for their convenience and reliability. Designed for small and short-term work. Battery models operate in temperature conditions up to 300 °C.

Pros:

comfort of use;
ease of transportation;
small size.

Cons:

small volume of work performed;
little functionality;
constant charging;
difficult to find replacement battery.

The most budget model– Intertool DT-2416. Second place goes to Intertool WT-1020 and third place to Craft CHG 2200E.

The best hair dryers with temperature control

Hairdryers of this type are considered professional. They have great functionality - from drying materials to working with concrete and welding plastic materials. They come with a large set of attachments. Operating temperatures range from 100 to 700°C.

Pros:

simple heat regulation mechanism;
high quality of work;
well-functioning heat supply mechanism;
adjustable handle for comfortable work.

Cons:

Overpriced for the tool.

The cheapest of the adjustable construction hair dryers is the DWT HLP16-500, a little more expensive than the Proton FT-2000/2, and in third place is the PowerPlus POW707.

The best construction hair dryer with display

The display shows temperature and performance data. You can select a function and it will automatically set the desired temperature and power. This type is suitable for professionals who often work with these tools.

Pros:

ease of setting the operating mode;
temperature setting accuracy.

Cons:

screens often break during operation
It is difficult to find a part or display to replace and repair.

In first place is the Sturm HG2003LCD with a power of 2 kW, and the air temperature is adjustable from 50 to 600 degrees. In second place is a hair dryer from the Japanese manufacturer Ryobi EHG2020LCD. The third place is occupied by a construction hair dryer from Bosch, model GHG 660 LCD.