Choosing a laminated door for the bathroom. Doors with which finish are better: veneered, laminated or with PVC film Laminated bathroom doors

Sections of the article:

Often people install the same interior doors. From the point of view of designers, this is the right and profitable solution. However, another question is how these doors will function in different rooms, for example, a bathroom or toilet. The peculiarity of the bathroom is high humidity. In this case, traditional interior doors simply won’t fit into the bathroom – in a few years wooden product or MDF will turn into a sad sight.

For a bathroom, the door must have special characteristics. What should it be like, what material is most suitable for a bathroom door? Let's find out.

Requirements for bathroom doors

There are not many requirements that must be met good doors for the bathroom. They relate to the quality of the door leaf, as well as the characteristics of the material from which the product is made. Several specific criteria can be identified.

Thus, one of the main requirements is the resistance of bathroom doors to long-term as well as short-term exposure to moisture and contact with water. Here you need to understand that not all doors that are offered in stores and construction hypermarkets will fully meet this requirement.

Also, the material used to make the door leaf and the product itself must be resistant to mechanical damage. This requirement follows from the moisture resistance characteristics. Nowadays, most bathroom doors have a special protective coating on the surface - it acts as an obstacle to various kinds damage. And if it is damaged, then the moisture will directly affect the material of the leaf, which will lead to the rapid deterioration of the door.

It is also desirable that the bathroom door leaf be treated with antiseptic impregnation. Otherwise, there is a risk to the health of family members living in the apartment. High humidity is a favorable environment for the development of fungal organisms. In addition to the risk of “living creatures”, bathroom doors are affected by constant temperature changes - they do not have the best effect on the condition of the product. If the door block is made of natural materials, then such a product may dry out and crack. But even with artificial materials, not everything is as good as it might seem - today there are frequent cases when plastic, when heated, releases substances hazardous to humans into the atmosphere.

Resistance to moisture and mechanical damage are only the main requirements that any bathroom door simply must meet (no matter what price category it is). However, there are a huge number of other, no less important nuances.

So, the door leaf should be comfortable, easy to maintain and use. Another important factor when choosing is the design and ergonomics of the product. And of course, it must have good sound and heat insulation.

About the choice of materials

Many people think that almost any model that they like in appearance or is in harmony with the overall interior of the room can be suitable as a bathroom door. But with this approach to choosing a door, you cannot count on long-term operation of the product.

Many modern models are made using composite materials. If we talk in simple words, then the door leaf is simply glued together from synthetic materials, A appearance Bathroom doors are made using veneering or various decorative films. This is the trouble - such coverage, even if good quality manufacturing, is not particularly durable.

Let's try to figure out what a bathroom door should be made of so that it fully meets the requirements of reliability and moisture resistance.

Solid wood doors

Solid wood door natural wood- This good choice, if not for one “but”. This product is susceptible to moisture and sudden temperature changes. The luxurious door to the bathroom will first begin to swell, then dry out, then swell again and in the end the owner will be faced with what is in the canvas and door block cracks appear.

As for the duration of aging, it depends on the type of wood and processing technologies used in manufacturing. However, many people still purchase just such solutions - these are not just doors to the bathroom, but also an element of status, since their cost is quite high.

Buying, and most importantly, using a bathroom door made of solid natural wood turns into a lottery. The correct approach to purchasing such a product is to choose a reliable manufacturer, however, again, the price factor plays a role, which not everyone can afford.

Veneered doors

Many people think that this is definitely a good choice. But this is not true at all. After all, what is veneer? This is a thin cut made from expensive wood. Often, far from the most quality materials. In addition, the veneer itself is not always of high quality.

Moisture and temperature changes, which constantly affect the doors to the bathroom, lead to such an attractive decorative finishing will soon come off. Moisture and water gets inside the door raft. As a result, the base from which the canvas is made will swell. You need to understand that in best case scenario MDF is used as a base.

When choosing bathroom doors made of veneer, you need to approach the issue in the same way as with solid analogues. All their characteristics and ability to withstand the harmful effects of moisture depend entirely on the manufacturer.

Some companies claim that their products have high moisture resistance. The main advantage of such bathroom doors is their affordable price. But you shouldn’t think that you can save money on these doors - the manufacturer has already saved on them and the products can release formaldehyde resins into the air.

Laminated

Manufacturers claim that these are the most moisture-resistant bathroom doors. And this is true. These structures consist of a frame and a filler - both are made on the basis of MDF. Next, the “semi-finished product” is covered with a special decorative coating and then laminated. The laminated coating is very reliable, but it will only be so until its integrity is damaged.

Even a couple of scratches are enough for such a laminated door to turn from moisture-resistant bathroom doors into trash. But if you use it carefully, then the door will last for many years. These products are not afraid of exposure to moisture, sudden and constant temperature changes, as well as any other influences other than mechanical ones.

But along with the advantages, such a bathroom door has a significant drawback - many manufacturers (since these products belong to the economy class) do not laminate the parts door frame With back side. It is from here that moisture penetrates inside and causes huge amount inconveniences from the very beginning of operation.

The frame becomes deformed, and gaps between it and the bathroom doors grow and disappear. It is also worth considering that such doors emit formaldehyde.

Plastic doors

Plastic is a material that perfectly meets all the requirements for doors installed in rooms with high humidity. Plastic products are practically not subject to deformation due to exposure to moisture or temperature changes. Often, such bathroom doors have excellent thermal and sound insulation characteristics.

The only drawback is the appearance. He is extremely strict and overly office-like. Such products really bother people at work, and if they also see them at home, it will not have a very good effect on their mood. Today there is a special type of bathroom door - these are laminated plastic products that imitate the color and texture of valuable wood.

Glass bathroom doors

We have reviewed almost all types of doors on the modern market. They all have their downsides. But solid glass bathroom doors are the most the best option. Glass is significantly better than plastic in many, if not all, characteristics.

The glass sheet is not deformed by humidity or temperature changes. It does not rot, as happens with wooden bathroom doors and MDF products. Glass does not scratch, is practically resistant to mechanical damage, and has a unique and expensive appearance.

Many people don't like one feature glass doors in the bathroom – transparency. It is believed that this is not very relevant in the bathroom. But only those who are not familiar with this claim so. modern technologies. Designs are applied to glass door panels using sandblasting. Also, a film is glued to the coating - this allows you to make bathroom doors more aesthetically pleasing, as well as completely remove transparency.

In addition, in relation to glass, the thought may arise that products made from it are very fragile. In fact, this is not true at all. For the production of such structures, window glass is not used - thick tempered glass is used. Also, so-called triplex glass is used for bathroom doors. It is strong enough, and if someone manages to break it, they won’t be able to get hurt by the fragments.

Design Features

We looked at the materials that are used in the production of doors that can be installed in bathrooms. But there are also design differences.

Thus, the standard for bathroom doors is traditional swing design. Today these products are manufactured by almost all world brands. Flaw swing door is that in small apartments it needs free space to open.

Another option for a bathroom door is sliding design. Operation of this solution will require significant less space, and the door can also be mounted inside the wall.

To conclude the topic about bathroom doors, it must be said that regardless of what design and what material is chosen, the fittings also have an impact on the service life. It is very important not only to choose a high-quality frame and door leaf, but also to buy handles, locks, latches and everything without which it is impossible to comfortably use the door.

Interior doors and door solutions for the bathroom - these are completely different products and you should not install the same doors throughout the apartment. This is an irrational and not long-term approach.

Interior doors can have different design, color, type, cost, however, for the bathroom they must be special. Therefore, moisture-resistant doors for the bathroom and toilet are not an unusual innovation, but a real necessity. If you want the bathroom door to serve for a long time, then you should choose it according to the following parameters: resistance to temperature fluctuations, moisture, steam and preservation of its original appearance. However, which partitions fit all the above criteria? And how to choose a high-quality moisture-resistant product at an affordable price?

If you want to set the level of humidity in the room, be careful! If you notice that after taking a bath, a lot of steam appears in the room and all surfaces become very foggy, then you should equip the bathroom with high-quality moisture-proof doors or good ventilation.

Moisture-resistant laminated bathroom doors

The range of moisture-proof surfaces is very large. Manufacturers provide a wide selection of partitions that meet the main requirement - resistance to moisture. In this case, the material of the product may be different:

acrylic;
veneer;
array;
glass;
plastic.

Useful advice! During the purchasing process, conduct a thorough inspection of the canvas: the panel parts should fit tightly, the entire surface should be varnished, and there should be no divergent seams. Such a door will not have any cracks into which moisture can penetrate, so it will last a long time.

Interior laminated doors: pros and cons

It should be noted that laminated doors for bathrooms and toilets, manufactured nowadays, are no different from expensive veneered products. Moreover, they are even superior to them in many ways.

Pros:

a protective layer of film will protect the surface from the aggressive effects of chemical components, humidity and temperature differences;
in comparison with solid wood, laminated partitions are not deformed;
Caring for such a cloth is easy: you can simply rub it with a dry sponge, and in case of severe contamination, with abrasives with small granules;
affordable cost, light weight, variety of options - allow you to choose what will be the ideal addition to the bathroom interior.

Types of coating

Laminate film is an artificial material that is available in various color solutions, making choosing interior doors a real pleasure.

Decorating bathrooms and toilets with laminated doors

There are a couple of film production methods that you need to understand before making a purchase:

The paper base is a democratic but durable material, its thickness is 0.2 mm.
Two-chrome laminate is a reliable coating that is often used in the manufacturing process; its thickness is slightly larger - 0.7 mm.
Melamine film is paper impregnated with melamine resin. This coating is very practical and durable.
Fiberglass film is a high-quality, expensive coating. Used for individual orders.

The right choice

In order for a laminated bathroom door to be of high quality and meet all requirements, you should pay attention to the following criteria:

Ideally, the door should have a lot of weight. This will be proof that a considerable amount of natural raw materials was spent on its production, therefore, it will last a long time.
The film should imitate the texture and follow the curves of the array. The matte finish has excellent moisture resistance, while the gloss and bright colors they are talking about an inexpensive cardboard base.
The laminate film must be perfectly smooth. The presence of unevenness indicates a defect, due to which the entire canvas may be damaged.
The panels and their fastenings must be firmly attached (if the manufacturer’s equipment is of poor quality, then the ends of the bead will look sloppy).
The side edge should be smooth, without delamination, while the decorative elements should also have an ideal appearance.

Cons of laminated doors

Laminated doors to the bathroom and toilet

Some buyers complain about certain flaws that laminate bathroom doors have, for example:

too smooth surface;
deep damage cannot be restored;
high price of high-quality laminate (it is slightly lower than veneer);
similarity of drawings.

However, you need to know that laminated coatings can withstand high mechanical loads, and their moisture resistance can be compared with glass coatings. If the choice falls on options with medium and high prices, then the chance of purchasing a poor quality product with a paper coating is small.

Regarding environmentally friendly characteristics, the use of pine, as well as natural compounds and resins, is evidence that such a product will not cause harm to health. Laminated sheets are often recommended for installation in children's institutions and medical institutions - this is indisputable evidence that they are harmless and environmentally friendly.

How to care for a laminated door

In order for moisture-resistant bathroom doors to be successfully used for a long time, you should follow some rules for caring for them, which are as follows:

every year it is necessary to clean hinges and mechanical elements;
treat the canvas with care products containing wax (once every 6 months), which will ensure a long service life;
mechanical damage, for example scratches, can be hidden using wax pencil, which should be heated and applied to the damaged surface, and then wiped with a cloth;
Can be cleaned with abrasive powder only in case of deep contamination.

Buying a laminated bathroom door is a good purchase, because there is a wide range, affordable prices, as well as excellent practical and technical specifications– the undeniable advantages of this product.

Types of bathroom doors

Most owners believe that the door to the bathroom must have moisture-resistant characteristics, and it must also cope with temperature gradations. In reality, the need for these parameters largely depends on the dimensions and layout of the room.

Sometimes bathrooms have showers that are not blocked, in which case moisture will definitely get onto the furniture, in particular, onto every surface. Therefore, in such a bathroom layout, moisture-resistant surfaces will be an indispensable solution.

Moisture-resistant laminated bathroom doors

Glass

An excellent example of moisture-resistant doors is their glass version. It is better to install painted or darkened options in the bathroom that will not be illuminated. As a rule, hinged or sliding glass doors are installed in the toilet or bathroom.

Plastic

Plastic doors also have good moisture resistance. However, in residential premises this option is rarely used, because most people associate them with public toilets. Although plastic can also be given home comfort, for example, paint or glue them. In addition, if there is a wooden door next to a plastic one, then this will be a sign of absolute bad taste.

Chipboard and MDF

Today, doors made of chipboard and MDF, which are lined with laminate to improve moisture resistance, are extremely popular. Thanks to this door option, you can achieve maximum harmony with the overall home interior. You can install veneered doors in other rooms, and laminated chipboard or MDF doors in the toilet and bathroom, the main thing is that they have an identical color scheme.

Veneer

If there is no need to install a door that protects against moisture in the bathroom, then you can choose a veneered one. Lacquered veneer – perfectly protects against any ingress of water. At the same time, any European surface made of wood, solid wood or MDF can be finished with this material.

Useful advice! If you don't know how to make a choice: what comes first, doors or tiles in the bathroom, then it's better to put first flooring, and then install the door. This sequence is important, because after laying the tiles the floor will become higher, and then it will be possible to order and install doors that best match the parameters of the opening.

Tree

In a spacious room in which the shower has a sealed partition, you can install wooden doors. However, they must be treated with special varnish coating. This is realistic because in a large bathroom the doors are unlikely to deform and swell.

The bathroom differs from other rooms in difficult operating conditions. This is reflected in everyone finishing material, which is used to decorate shower rooms, including doors. Interior floors differ in color, shape, size, structure and other parameters, but they all have one thing in common - the ability to withstand extreme loads, as well as an attractive appearance.

Today, moisture-resistant doors covering the entrance to the bathroom and toilet are a given, without which it is difficult to imagine maintaining a shower room. However, in order to correctly select interior flooring, you need to know the advantages and disadvantages of each material. After all, different raw materials meet different needs, and also have their own price and features during operation and installation. But at the same time they must meet the following parameters:

durability;
water resistance;
steam resistance;
ability to withstand high temperatures.

The best option

Currently, the choice of materials that are resistant to moisture is quite large. Manufacturers offer a wide range various doors between the toilet and the rest of the apartment. In addition, all interior partitions are moisture resistant and have the necessary performance characteristics.

The following materials are usually used:

plastic;
veneer;
acrylic;
glass;
array.

However, even high-quality raw materials must be checked to ensure compliance with all parameters. It is necessary to conduct a thorough inspection of the product, i.e. the entire surface of the door must be reliably varnished, the panel elements fit tightly to each other, and there must be no divergence of the seams. This ceiling, which does not have cracks or chips, is not susceptible to water penetration, which is why its service life is significantly increased.

Advantages and disadvantages

It should be noted that modern products for the bathroom and toilet, produced today by leading manufacturers, do not differ significantly from the most expensive veneer floors. And to be honest, in some positions they are superior to them.

The positive aspects of moisture-resistant bathroom doors:

The protective film protects the product from the effects of aggressive cleaning agents, high humidity and temperature changes.
An affordable price allows you to purchase moisture-resistant doors regardless of your income level.
Compared to solid wood, a laminated product does not deform over time.
Light weight allows not only easy transportation and convenient installation, but also long-term operation.
Easy care. It is enough to wipe the ceiling with a dry cloth or damp sponge with small abrasive particles.
A wide range allows you to choose a product suitable for any design or interior.

Like any material or product, moisture-resistant doors have not only strengths, but also negative. Laminate floors have a relatively small list of disadvantages, many of which are quite subjective in nature, but this does not stop them being considered among the disadvantages of the product. Doors to the bathroom and toilet have the following weaknesses:

Excessively smooth surface.
If the damage is deep, the door cannot be restored.
Very high price for individual laminate products.

It is worth noting that laminated doors excellently withstand high mechanical loads. In addition, their moisture resistance is at the level glass products. As for the performance properties of natural materials, it is best to use high-quality wood species, for example, pine. It is impregnated with resin, which makes its moisture-resistant and environmental performance unique.

Types of laminate

Moisture-resistant doors are a relatively new concept in home improvement. That is why they require special treatment, because protection from moisture, microorganisms and other negative factors is their main responsibility. And they must handle it well! Thus, choosing between various types ceilings, you need to pay attention to the properties and only then to the appearance.

As for external data, today modern manufacturers They give us quite a wide choice. Laminate film is great for bathrooms and toilets. It is an artificial material manufactured in various color scheme. Moisture-resistant laminate doors will suit any design. Varieties:

Types of doors

In conditions of high humidity, the door plays a protective role, so it must have moisture-resistant characteristics. In addition, it must cope with condensation, steam, temperature influences, and also successfully resist rot, mold and mildew. The choice of a particular material as a ceiling depends on many factors, from price to room dimensions. Types:

Video instructions

Modern laminated interior doors can be installed not only in residential premises. They can be installed even in rooms with high humidity. They can be installed not only in the kitchen, but also in the bathroom and bathroom. Laminated doors economy class doors last as long as solid doors. Consider a number of features when choosing suitable model doors.

Let's consider options for laminated doors designed for bathrooms, which can be found in stores and on construction markets. In the mid-90s, laminated doors with paper coating were especially popular. They are not suitable for the bathroom.

Paper always remains paper, no matter how high quality it is. The outer paper layer is not suitable for use in damp areas. The coating can quickly deform, and the door itself will lose its technical characteristics and lose its luster.

Laminated doors with film on them can be considered conditionally suitable for use in the bathroom. paper based, impregnated with synthetic resin (acrylic or melamine). Thanks to impregnation, the coating acquires greater strength and moisture resistance. But in this case it is important to limit surface contact with water. Its drops may get splashed onto the canvas.

When using such doors, an acceptable limit for air humidity is established. It is about 65%. It is better not to use such doors in cramped bathrooms and bathrooms. But if you still decide to use such a laminated door, install good system ventilation.

The most optimal solution for the bathroom and toilet is to install a laminated door coated with a two-chrome laminate. At the moment this is the most advanced laminate. It has a polymer origin and a layer of 0.4 to 0.8 mm. It has suitable water resistance.

Doors covered with laminate do not lose their quality when elevated level humidity. They can withstand up to 80% humidity. For comparison, in bathrooms and restrooms of standard apartments this figure rarely rises above 65-70%. It is also important to consider that in rooms with high humidity the air temperature is usually higher than in other rooms.

From this point of view, doors covered with laminate also benefit from their competitors. They can withstand temperatures exceeding +80° C. Laminated doors, unlike wood panels, are practically not subject to expansion in conditions of high humidity. But if the bathroom is used quite often, is kept mostly closed and is not well ventilated, over time, peeling may appear at the ends of the door panels.

To avoid this, it is important to ensure that the ends of the door are well finished with an insulating edge, which is made from waterproof PVC. Typically, such an edge is represented by a tape layer, the thickness of which does not exceed 2 millimeters.

The canvas must be selected in such a way that when installing it, a small gap will form between the bottom of the door and the threshold. It will serve as an additional vent, which will not allow moist air to stagnate for a long time in the bathroom. But at the same time you will have to forget about additional sound insulation, but in the bathroom there is no particular need for it.

Thus, when choosing a laminated door for a bathroom, it is important to take into account many features without which right choice it will be difficult to do. Give preference only quality doors from laminate.