Technoelast epp roofing roll technonikol. Technoelast: characteristics and application features Technoelast ekp laying technology

"Premium" class, produced by TechnoNikol. Characterized by an increased degree of reliability.

Intended for the installation of a lining or top layer in the roofing carpet of buildings, waterproofing engineering structures, foundations, tunnels, ventilation shafts, swimming pools. Can be used in all climatic regions in accordance with SNiP 23-01-99 and on objects of any complexity.

Technological features

Fused bitumen-polymer waterproofing Technoelast TechnoNikol is a rolled sheet, on the base of which a bitumen composition with mineral additives is applied on both sides - talc, dolomite, modified with SBS polymer (artificial rubber styrene-butadiene-styrene).

The top and bottom of the surface is covered with protective polymer films or granular shale chips. Polyester (polyester), fiberglass or fiberglass is used as a base.

Performance characteristics

The SBS polymer included in the composition gives the material elasticity and high temperature characteristics - frost resistance and heat resistance.

The flexibility of the canvas is maintained at temperatures down to -25°C, which allows you to work with it in winter.

The laid material does not lose its plasticity at temperatures down to -35°C, thereby eliminating fragility and violation of the tightness of the surface and joints. Technoelast

Heat resistance up to 100°C ensures the stability of the coating, preventing slipping due to solar overheating in hot climates.

Main advantages

• does not crack under deformations and loads in a wide temperature range, providing absolute waterproofness;
• steam resistant;
• not susceptible to the action of fungi and microorganisms;
• durable, service life is 25 - 30 years.

Technoelast is produced in several modifications - EKP, TKP, EPP, HPP, the characteristics and structure of which are somewhat different from each other. The structural features determine the purpose of the materials.

Technoelast EKP

Used as a top layer " soft roof» in two-layer coatings. Ideally combined with Technoelast EPP type as a lining roofing waterproofing. When repairing old roofs, laying one layer is sufficient.

The basis of this material is reliable, elastic polyester - index E in the designation. It has high tensile strength and is not subject to rotting. The upper side is covered with a layer of coarse-grained slate chips in gray or green colors (index K). The bottom side is made of low-melting polymer film (index P).

Specifications

Scope of application

Intended for roofs that experience deformation and have a slope. Slate chips protect the surface from harmful ultraviolet radiation. Due to its sufficient thickness, it can easily withstand loads and human movement on the roof.

Technoelast EPP

It is a lining layer in roofing carpets and a waterproofing coating for utility buildings and building structures.

Made from elastic, durable polyester (E). The top and bottom layers are protected by a fusible film that prevents sticking during storage (PP).

Specifications

Scope of application

It has successfully proven itself on dynamic flexible surfaces and roofs experiencing deformation loads as a lining material. Paired with Technoelast, EKP will create an impeccable roofing installation.

Excellent for external and internal waterproofing various designs: tunnels, bridge spans, underground structures, boiler houses, swimming pools, .

Technoelast TKP

Heavy-duty material used as the top layer of “soft roofing” roofing carpet. Has excellent technical specifications in strength and resistance to mechanical loads, but low elasticity. It is recommended to use on roofs without a slope that do not experience various kinds deformations.

The reinforcing base is a tensile, but low tensile, frame fiberglass fabric (T). The outer side of the bitumen-polymer composition is protected by a coating of shale chips (K), the inner side is covered with a polymer film (P).

Specifications

Scope of application

A very durable coating designed for flat or slightly sloped roofs of civil and industrial buildings. Excellently copes with intense surface loads, maintaining absolute waterproofness for a long time. long term operation.

When installing a new roof, it is combined with Technoelast HPP or other underlay waterproofing. It is enough to repair the old coating in one layer.

Technoelast HPP

It is a roofing lining and waterproofing fabric. Is budget option from the Technoelast premium product series.

In the middle lies fiberglass, which has low strength and elasticity (X), treated with a polymer-bitumen mass. Both sides are covered with fusible film (PP), which prevents sticking during transportation.

Specifications

Scope of application

Intended for unloaded flat or slightly sloped roofs, where it serves as the bottom layer of the roofing carpet. Can be used together with Technoelast TKP. Reliably performs the waterproofing function of basements, boiler rooms, bathrooms, swimming pools, pipes.

Information to note : , .

Technoelast is biostable.

Scope of application:

Designed for waterproofing buildings, structures and building structures.

Structure:

Technoelast is produced by applying a bitumen-polymer binder consisting of bitumen, SBS (styrene-butadiene-styrene) polymer modifier and mineral filler(talc, dolomite, etc.). Coarse-grained and fine-grained dressings and polymer films are used as a protective layer.

Specifications:

Rolls of material should be stored in a dry, closed area. vertical position in one row in height at a distance of at least 1 m from heating devices.

Brands:

Depending on the type of coating and area of ​​application, Technoelast is available in two grades:

Technoelast K— with coarse-grained coating on the front side and a polymer film or fine-grained coating on the surfaced side of the web; used for installing the top layer of waterproofing with protection from sun rays;

Technoelast P— with fine-grained powder or polymer film, or a combination thereof, on both sides of the canvas; used for the installation of lower layers in multi-layer waterproofing of building structures (foundations, tunnels, roofs, etc.).
Technoelast is biostable.

EPP

HPP

ECP

TCH

Table of Material Characteristics:

Work execution:

According to the “Guidelines for the design and installation of roofs made of bituminous materials from the roofing company TechnoNIKOL”, it can be used in all climatic regions according to SNiP 23–01.

TechnoNIKOL Corporation offers modern building materials, meeting Russian and European quality standards, which include roofing roll materials, waterproofing mastics, bitumen, materials for polymer roofing.

Technoelast EPP- rolled bitumen roofing and waterproofing material manufacturer TechnoNikol, Russia. Technoelast EPP is made on a polyester base and has a polymer film on both sides.

Application

Technoelast EPP used as the bottom layer in two-layer roofing systems during installation and reconstruction flat roofs. Technoelast EPP is successfully used as surface-surfaced roll bitumen waterproofing for foundations and floors. The material can be used as a substrate for soft bitumen shingles.

The element of Technoelast is the cold of the polar night and the constant pressure of man-made groundwater. It is used where other materials are unlikely to provide the required level of protection against water. Technoelast is always there where serious construction projects are implemented. It is there where only the highest reliability is needed.

Technoelast It is made by applying a bitumen-polymer binder containing bitumen, SBS thermoplastic and fillers to a fiberglass or polyester base. Coarse-grained (K), fine-grained topping (M) and polymer film (P) are used as a protective layer.

Technoelast is fused using a propane torch.

Peculiarities

Technoelast is biostable.

Structure

Technoelast is produced by double-sided application of a bitumen-polymer binder consisting of bitumen, styrene-butadiene thermoplastic elastomer and filler onto a glass or polyester base. Coarse-grained and fine-grained dressings and polymer films are used as a protective layer.

Stamps

TO(Technoelast HKP, TKP, EKP slate green and gray)
WITH coarse-grained coating on the front side and polymer film or fine-grained coating on the welded side of the web; used for installing the top layer of roofing carpet;
P(Technoelast HPP, TPP, EPP)
WITH fine-grained sprinkles or polymer film, or a combination thereof, on both sides of the canvas; used for installing the bottom layer of roofing and waterproofing building structures (foundations, tunnels, etc.).

Technoelast- group modern materials, intended for the arrangement of roofing structures and for waterproofing various elements of buildings for various purposes. This is one of the most popular and sought after multifunctional materials to protect buildings from the negative influence of climatic and natural phenomena, exposure to moisture and significant temperature changes.

Structure of Technoelast

Currently, Technoelast is produced in a special technological cycle by the method of bilateral application of a special bitumen-polymer coating on a reliable polymer base. The coating consists of styrene-butadiene thermoplastic elastomer, bitumen and filler. For the final protective layer, as a rule, coarse-grained or fine-grained natural toppings, as well as a polymer film, are used.

Technoelast brands

Brand "K"«

With coarse-grained coating on the front side and fine-grained coating or polymer film on the fused side - used for constructing the top layer of the roof.

Brand "P"

With a polymer film or fine-grained coating or a combination thereof on both sides of the material - used for constructing the bottom layer of the roof and waterproofing tunnels, foundations and other building structures.

In our company you can purchase Technoelast:

• pickup from manufacturing plants (Ryazan, Voskresensk, Rybinsk);
• with delivery to your facility both in Moscow and in the regions;
• Pickup from a warehouse in Moscow.

Technoelast EPP

E - polyester, P - film, P - film

Technoelast EPP– one of the most versatile and popular waterproofing materials.
The basis of Technoelast EPP is one of the most reliable - it is polyester with high strength and elasticity.
Technoelast EPP used on pitched roofs .

Characteristics Technoelasta EPP

• Heat resistance of at least 100 °C (within 2 hours);
• Flexibility on the beam R=25 mm, at a temperature of -25 °C;
• The thickness of the material is 4 mm;
• Protective coating: super-melting film on both sides;
• The mass of the binder component averages 4.5 - 5 kg;
• Base: polyester.

Technoelast EPP able to cope well in difficult situations climatic conditions. At the same time, the service life of Technoelast EPP is more than 25 - 30 years. This can be achieved with high-quality installation.

Technoelast EPP in most cases it can be safely recommended for use. Technoelast EPP It is not recommended to use it together with materials that do not have a polyester base - the properties of polyester will not be fully used.

Features of the composition of Technoelast EPP

The material owes its increased elasticity to the strong and reliable polyester included in its composition, onto which a special binder composition of bitumen is applied (in addition, Technoelast EPP includes SBM thermoplastic and non-toxic fillers to give the material frost resistance down to -30 ° C, heat resistance, and extending the service life material up to 30 years). The use of two layers of EPP in the composition of Technoelast protective film, protects the material from sticking, speeds up and facilitates the work of installers when carrying out roofing works. This is due to the fact that when fusing, burning, the film heats up the surface of the roofing more evenly and quickly.

The main scope of application and application of Technoelast EPP

They use high-quality and durable Technoelast EPP as a preparatory layer for construction roll roofing. The presence of polyester in the material allows it to withstand significant loads while maintaining excellent waterproofing properties. Technoelast EPP is also recommended for waterproofing basements, foundations, bridge spans, swimming pools and other hydraulic structures.

Before applying the material, thoroughly prepare the base, clean it of debris and dirt. Cracks, potholes and chips are repaired cement mortar and sand it down. The prepared surface is primed with a bitumen primer to maximize the adhesion of the material to the surface. The insulation is fused using gas burner with overlap (approximately 100 mm). When fusing, overheating of the material must be avoided.

Technoelast HPP

X - canvas, P - film, P - film

Structure of the material Technoelast HPP:

Key indicators:

flexibility of the material on the beam (R) - 25 mm (not lower than - 25 0 C);

brittleness temperature of the bitumen layer up to - 35 0 C,

heat resistance + 100 0 C.

Technoelast XPP can be laid at temperatures down to -35 0 C; when using the material below the specified temperature, the brittleness during bending will increase. A roof waterproofed with Technoelast works well in any frost.

If you need to make high-quality roof waterproofing and, in addition, save a lot of money, then Technoelast HPP is what you need. For effective roof waterproofing, it is necessary to use Technoelast HPP (bottom layer on fiberglass) in combination with Technoelast TKP (top layer on fiberglass).

Breaking strength of fiberglass

Technoelast XPP with a fiberglass base is weaker in tensile strength compared to technoelast based on fiberglass or polyester. However, this does not in any way affect the main characteristic qualities - they remain at the same level.

Main parameters of Technoelast HPP:

Application of Technoelast HPP

Technoelast XPP is used as the bottom layer of roofing waterproofing (used as a lining material) in combination with Technoelast TKP and waterproofing various structures in construction to prevent moisture from penetrating into them, such as:

• roof;
• interfloor office floors;
• foundation (horizontal);
• bathrooms (waterproofing);
• pools and reservoirs with a protective layer;
• boiler rooms, engineering communications(waterproofing).

Laying Technoelast HPP

At the first stage, we prepare the base for surfacing. To do this, it is necessary to initially seal all large cracks and chips with bitumen mastic, then treat the surface of the base with a bitumen primer. After the primer has dried, we determine the layout map of Technoelast HPP, cut the material and make cutouts in the places where hatches, lanterns, funnels, etc. are installed. Having rolled Technoelast XPP back into rolls, we proceed directly to surfacing.

Technoelast EKP

E - polyester, K - crumb, P - film

Used for the top layer of roofing carpet

and has a durable and elastic polyester base.

Characteristics of Technoelast EKP:
-Flexibility on the beam R = 25 mm, not higher than - 25°C,
-Heat resistance + 120°C,
-The brittleness temperature of the bitumen layer is up to - 35°C (this means that Technoelast can be used in work up to a maximum of -35°C; at the highest specified temperature, the material becomes more brittle when bending).

A fully finished roof perfectly performs its waterproofing functions in any frost.
Technoeplast EKP has an increased quality of modified bitumen (it is elastic), technoelast EKP has a remarkable quality of the top protective layer, and its base consists of one of the most durable and elastic materials - polyester. Used together with lining material— EPP technoelast.
Polyester is not inferior in its properties, and even surpasses such material as fiberglass, which is also used for the base. And unlike fiberglass, polyester does not rot. Externally, it resembles white foam polyethylene.
A distinctive property of polyester is its ability to stretch up to 60%; this elongation effect is absolutely indispensable in those structures that are subject to movement.

Technoelast HKP

X - fiberglass, K - crumbs, P - film

Technoelast brand HKP is a multifunctional SBS-modified, weldable roofing material increased reliability, which is designed to insulate the top layer of the roof in all climatic regions with increased safety requirements.
Technoelast is produced by applying a bitumen-polymer binder on both sides to a fiberglass base, including bitumen, SBS thermoplastic and fillers, with further application of protective layers on top and bottom.

Characteristics of HKP technoelast:
— The base material is fiberglass;
- Type of protective layer - on the front side - coarse-grained gray slate bedding, on the underside of the roofing sheet - polymer film;
— Tensile tensile strength — not less than 294 N/50mm;
— Heat resistance not lower than 100 °C;
— The brittleness temperature of the binder is not higher than -35 degrees C;
— Weight 1 sq.m. - 5.0 kg;
— Water absorption during the day — less than 1% by weight;
— Length — 10 m;
— Width — 1 m; thickness 4.2 mm;

Technoelast TKP

T - fabric, K - crumbs, P - film

The material has a rather pleasant-looking gray front surface.

Characteristics of TKP technoelast:
— Heat resistance for 2 hours, not less than 100 degrees Celsius;
— Flexibility on the beam R=25 mm, at a temperature of -25 degrees Celsius;
— The basis is fiberglass;
— Thickness of the top layer – 4.2 mm;
— Topping: gray slate.

Technoelast TKP on a fabric basis is used when installing the top layer of roofing carpet on flat roof. SBS-modified, waterproofing overlay material. Technoelast TKP is used when it is necessary to ensure increased reliability of roof waterproofing. Technoelast TKP is recommended for use on substrates not subject to mechanical and thermal deformation. The material is characterized by high strength but low elasticity.
Technoelast TKP is the most durable top layer in the line of bitumen-surfaced materials. Slate coating is used as protection against ultraviolet exposure to its base.
Fiberglass is used as the basis for the polymer-bitumen binder - the most durable but inelastic material. Technoelast TKP is second only to Technoelast EKP in terms of reliability.

Recommendations for the use of Technoelast TKP
We recommend using Technoelast TKP as one of the most reliable and durable materials for the top waterproofing layer in multi-layer structures on a solid roofing base, for example, on top of a cement-sand screed.
The material can be used in conjunction with Technoelast TPP or HPP (a more economical option).
At major renovation old roof, it is possible to apply Technoelast TKP directly onto the base, without using a lower waterproofing layer.