Handgum slime at home with your own hands. How to make slime at home: the simplest and safest ways

Greetings, my dears! Today we will learn how to make a wonderful anti-stress toy at home - slime, or, as it is also called, slime. It should be noted that it is good for both children and adults. To be honest, I don’t even know who will like this toy more.

While I was preparing this article for you, I realized that I became interested in sliming - it’s a very exciting activity. But the most important thing is that your children will certainly enjoy this type of creativity, as well as its result. For example, my daughter enthusiastically accepted the idea of ​​​​making slime at home.

We tried from different ingredients, but the edible, glass and magnetic slimes turned out best. Below you will find a wide variety of homemade slime recipes. However, it is difficult to imagine real slimes without glue, sodium tetraborate (borax) and soda. So experiment, try and create!

How to make slime in 5 minutes without PVA glue and sodium - recipe for children (+ video)

This slime is prepared very easily and quickly with just one ingredient, so even a child can handle it. It is safe to prepare and does not require much skill.

Pour thick shower gel into a bowl.

Let it evaporate for two minutes. We wait for the mass to cool and place it in the refrigerator for 20 minutes. Slime for children is ready!

Tip: to prevent the finished slime from sticking to your hands, you can grease it with a small amount of vegetable oil!

Making slime at home from glue, water and paints

Three-ingredient slime is prepared just as quickly and easily as the first. Only it is based on office glue, paints and water. By the way, if you like transparent slimes, then it is not necessary to use paints in this recipe.

Ingredients:

• Stationery glue
• Paints (optional)

Cooking method in stages:

Squeeze the transparent glue into a container.

Add water.

Stir until the glue curls and does not stick to your hands.

Tip: if you wish, you can add a flavor (artificial or essential oil) and gouache or acrylic paints (any color) to the glue. Just do this before mixing with water!

How to make slime at home from baking soda, glue and water?

This slime is very easy to prepare, but takes longer than the previous two. Its main advantage is that it turns out just like in a store and does not stick to your hands.

So, prepare:

• PVA glue
• Gouache
• Wooden stick

Cooking method in stages:

Squeeze PVA glue into a bowl.

By using wooden stick add paint of your favorite color and mix it thoroughly.

Pour a couple of pinches of soda into a glass of water.

Gradually pour a teaspoon of dissolved soda into the glue, continuing to stir. Mix everything thoroughly for a couple of minutes and get a cool slime!

We prepare slime at home from PVA glue and sodium tetraborate

Sodium tetraborate is a popular and cheap thickener used to make slime. Its only drawback is the smell of glue. Therefore, I do not recommend preparing such slime for small children.

Take:

• PVA glue
• Sodium tetraborate
• Disposable cup
• Gouache of any color
• Wooden stick or pencil for stirring

Cooking method in stages:

Pour PVA glue into a disposable cup.

Add a couple of drops of gouache and mix with glue.

Add sodium tetraborate little by little (literally a couple of drops!). Stir and add borax again until the slime thickens. Lizun is ready!

How to make slime from glue and toothpaste?

Not everyone can make a slime prepared according to this recipe. Because no thickener is used here. But for the sake of experiment, you can try it, especially since it’s very simple and inexpensive!

Ingredients (by eye!):

• Toothpaste
• Stick or spoon for stirring

Cooking method in stages:

Squeeze toothpaste into a bowl.

Add glue.

Mix everything well and leave to harden for two days.

How to make slime at home from shaving foam and salt?

This recipe is suitable for advanced slimers who have already made dozens of slimes with their own hands. The ingredients are available, but the cooking technology is quite complex. Yes and good result not guaranteed.

We will need:

• Shaving foam
• Thick shampoo
• Paint (acrylic or food grade)

Cooking method in stages:

Pour thick shampoo into a bowl.

Add shaving foam.

Add paint and mix everything thoroughly.

Add salt, mix and steam our mixture. Place in the refrigerator for 30 minutes.

Video of making slime without glue, starch and sodium tetraborate (unsuccessful recipes)

If you are eager to experiment and don’t mind the ingredients, you can try making slimes using the recipes from the following video. However, judging by the plot, the author did not succeed in making these slimes. Because without glue and sodium tetraborate this is theoretically completely unrealistic.

Making slime from water without borax (sodium tetraborate)

Slime made from water and silicate glue is very plastic and transparent. However, for beginners the technology of its manufacture will be quite complicated. So stock up necessary materials, patience and forward to new creative exploits!

Ingredients:

• Ice pieces
• Silicate glue
• Glitter (if desired)
• Wooden stick

Cooking method in stages:

In a container with cold water add ice.

Add soda.

Using a wooden stick, stir everything until the ice melts.

Pour silicate glue into water.

Use a stick to collect the slime from the sides of the bowl.

Add glitter.

Recipe for making slime at home from shaving foam and baking soda

You can make a high-quality “fluffy” slime very simply and quickly if you use shaving foam and soda. The result is great!

Prepare:

• Stationery glue
• Food coloring
• Shaving foam
• Contact lens solution
• Boric acid
• Liquid soap

Cooking method in stages:

Pour office glue into the container.

Add dye and mix ingredients.

Shake the shaving foam and add it to the bowl. Mix everything again.

Take some baking soda and fill it with contact lens liquid. Pour into a container and mix.

Add a little more lens fluid and stir.

Pour 30 drops into a glass with 50 ml of water boric acid and a little liquid soap. Mix the ingredients and add to the main mass. Once again, mix everything thoroughly and get an excellent slime.

Video on how to make slime from shampoo and water without PVA glue

Slime without glue is a very dubious idea. However, there are a lot of recipes for making it, including this one. Therefore, you can try to make slime from water and shampoo, as in this video.

How to make edible slime at home?

This is the most delicious slime I have ever tried. And it is prepared from just two ingredients - marshmallows and Nutella chocolate spread. Try making this treat for children over three years old. Bon appetit!

Cooking method in stages:

Melt the marshmallows in a water bath or in the microwave.

We get this mass.

Add Nutella chocolate spread to it.

Mix everything thoroughly and get an edible slime.

Making glass slime with your own hands

This slime delights with its amazing transparency. True, it will take a lot of effort and at least two days to make it. But the result is justified.

So take:

• Transparent glue
• Thickener (borex or sodium tetraborate)
• Wooden stick

Cooking method in stages:

Pour 50 ml of transparent glue into a container.

Add 50 ml of water and stir well.

Add Borex thickener or sodium tetraborate in such an amount that your slime becomes viscous. Let's knead it thoroughly.

Leave it for 2 days until all the bubbles come out and it becomes transparent.

How to make magnetic slime at home?

I liked this slime the most. He can not only absorb and push out a magnet, but also move with it. Very cool, so I recommend trying it!

Ingredients:

• Borex thickener
• Hot water
• Shaving foam
• Dye
• Sequins
• Magnetic chips
• Big magnet

Cooking method in stages:

Pour half a teaspoon (without a slide) of Borex into a container and add 250 ml hot water. Stir and leave to cool.

Pour 100 ml of glue.

Add a little shaving foam and mix until smooth. Add a few drops of food coloring or acrylic paints. Stir again.

Add glitter.

Pour in magnetic shavings.

Add a thickener and form a slime.

Well, our fun master class on making slimes at home has come to an end. Which one did you like best? Maybe you have your own slime recipes? If so, I will be doubly grateful for the comments left under the article. See you again on the blog!

Many inquisitive children are interested in learning how to make slime at home without sodium tetraborate and pva. The thing is that when these two components are added, the slime becomes toxic, and it will be harmful for the child to play with it. But there are different alternatives, so we invite you to get acquainted with them.

You will need:

• Corn starch - 2 cups;
• Warm water – 1 glass;
• Food coloring.

Let's get down to business:

Add starch to water in small portions until you have added all required quantity starch. To make the slime easy to mix, the water should be room temperature, namely warm.

Now it’s important to decide what kind of slime you want to see. If you want it to be more stringy, then the amount of water needs to be increased. Also, the consistency of your toy depends on what the water temperature was.

Once you've decided on the consistency, it's time to add food coloring. It all depends on your imagination. You can add your favorite color or experiment with mixing colors.

What is important to know about starch slime

Starch slime requires a special storage method. Place it in a bag and seal it tightly, then put it in the refrigerator. Remember that your chewy toy will not last long. It will last you no more than five days. But then you can make yourself a new one without much difficulty.

Recipe 2: how to make slime from soda and dishwashing detergent

You will need:

• Soda;
• Dishwashing detergent;
• Water;
• Dye

Let's get down to business:

Take any container, but it should allow you to easily remove the finished slime in the future. The dishwashing liquid acts as glue in this recipe, so the size of the slime will depend on how much you add.

The thickness of the slime depends on the amount of soda, an important factor. Soda must be added gradually, while constantly stirring the total mass. You can adjust the consistency of the slime by adding water or detergent if necessary.

What is important to know about soda slime and dishwashing detergent

You can use any dishwashing liquid, since the brand and manufacturer will not affect in any way how the slime turns out in the end. Water is needed only if the consistency of the slime is too thick. Instead of food coloring, you can add a little regular gouache.

Recipe 3: how to make slime from shampoo

You will need:

• Shampoo;
• Detergent, shower gel

Let's get down to business:

This method of making slime requires absolutely no effort. Simply mix all the ingredients, which should be in equal proportions. Once the mixture is ready, place it in the refrigerator overnight. This time will be enough for the slime to prepare for use.

When making slime, you can fully use your creativity and fantasy. Add to the mixture as desired you can add glitter, natural flavors, essential oils or some small details . Remember, no matter what the composition of homemade slime is, it will not last you more than a week. After seven days, your toy will most likely become unusable, and may even appear bad smell. All the ingredients you used in making it are likely to be found at home. By refusing PVA and sodium tetraborate, you have made a choice in favor of safety.

This beloved toy, named after the famous character from Ghostbusters, continues to win the hearts of children and adults. How else can we explain the fact that everyone is trying to make slime today - this soft, shapeless, viscous lump that looks like both liquid and plasticine? On the Internet you can find many recipes for mixing a special composition, some of which are very simple and require the use of literally available materials. We are ready to talk about the easiest ways to make handgum, which literally anyone can implement at home.

The secret to obtaining “liquid plasticine”, which can be unusually soft and at the same time return to its original shape, lies in the use of special components. The main one is sodium tetrabonate. This substance is used by handgam manufacturers, adding only dyes to it. What to do if there is nowhere to get sodium tetrabonate? It's simple: you just need to find a worthy substitute for it! But can a slime without sodium tetraborate be real: moderately viscous and viscous? What materials will help replace this important component? How to make slime without sodium tetraborate at home? Let's find out!

Ways to make slime without sodium tetraborate

The most popular people will help you make a toy that is popular all over the world. different materials, which individually or in combination with other substances are capable of demonstrating properties very similar to the properties of real “store-bought” slime. So, let's look at examples of making toys from everything that can be found in any home: plasticine, gelatin, flour, starch, shampoo, liquid soap, soda and glue.

Slime made from plasticine and gelatin

For our first toy recipe you will need the following ingredients:

• plasticine (100 g);
• gelatin (20 g);
• cold water (100 ml).

This method of making slime is very simple.

1. First of all, pour the gelatin into some metal container, pour water (about 50 ml) into it and set our mixture aside for 30-40 minutes.
2. After this, slightly heat the mass (without bringing to a boil) and make sure that the gelatin is completely dissolved.
3. We take another container and prepare the plasticine: cut it into small pieces, fill it with the remaining water, put it on the fire and bring our mixture almost to a boil.
4. As soon as the plasticine has completely melted, add gelatin to it and mix everything thoroughly until a homogeneous mass is obtained.

The toy is ready!

Shampoo slime without sodium tetraborate

If the previous method is more suitable for parents, since it involves the use of a gas or electric stove, then this one is perfect for any child. This time we will need:

• Shampoo (50 ml). We recommend using simple shampoo, without conditioner or other foreign impurities. Remember that the color of the shampoo will determine the color of our slime.
• PVA glue (you may need up to 150 ml). The best option– Titan PVA glue.
• Food coloring (about 3-5 g) Best choice will be the composition that is intended for painting easter eggs. It contains natural ingredients and is therefore safe.

Making slime according to this “recipe” is carried out in a similar way:

1. First place the shampoo in the container for mixing the ingredients, then begin stirring it, gradually adding PVA glue. It is very important to monitor the consistency of the resulting mass.
2. As soon as our slime becomes moderately viscous, we stop adding glue.

Don’t forget that our shampoo can always be tinted with dye: it must be added immediately - even before the glue.

Slime made from glue and starch

Run out of shampoo at home? Offer your child another one interesting way making slime. We will need:

• starch (150 g);
• PVA glue (up to 100 ml);
• dye (5 g) - ordinary gouache can act as it;
• water (100 ml) - it will not be needed if liquid starch is used.

Mix all the ingredients again in a suitable container until the mass becomes homogeneous and quite viscous.

Can't find starch at home? No problem, let's try replacing it with glue:

• water (100 ml.),
• PVA glue (50 ml.),
• dye (food or gouache);
• soda (1 tablespoon).

Mix glue with soda and dye, add water - that’s it, the slime is ready!

Slime made from flour and water

Another available recipe that we will need:

• flour (150 g);
• water (about 100 ml);
• dye (3 to 5 g).

Be sure to invite your child to make this slime on their own:

1. Let him place about 150 g of flour in a suitable container, and then pour cold water into it, and then a little hot.
2. Next, all that remains is to add any available natural dye and mix all the ingredients until a homogeneous mass is obtained.
3. The finished mixture needs to be cooled, so we place our slime in the refrigerator. After 2-3 hours our toy is ready!

Video: how to make slime at home without sodium tetraborate

The only thing that can prevent you from making a high-quality toy is the incorrect selection of the number of mixture components. To understand how much starch, flour, soda, shampoo, water and other ingredients to make slime you need to take, we recommend watching the following training video:

DIY dress without a pattern

How to make a slime, an unusual toy that easily changes shape, we will look at in detail in this article. You will learn different ways to create interesting fun from available materials.

To make glitter slime, you need to add some glitter to one of the recipes provided.

As children, we would throw slime as hard as we could onto walls or doors and watch it flow down. Its prototype was the hero of the cartoon about Ghostbusters, where there was a hero named Lizun: a creature that easily changed its shape. Also, the slime was used not only for games: it was easy for them to collect lint from clothes, because there were no special rollers for this yet on free sale.

Despite its rather ancient invention, slime (handgam, slime) is still popular. It develops imagination and fine motor skills, and he’s just fun to be around! Of course, you can buy ready-made slime in a store, but its composition is far from natural and safe, so parents often want to make it themselves in order to protect their child. Well, older children will be interested in making it themselves.

So, here are several recipes that differ in composition and degree of difficulty in preparation.

How to make slime from shampoo and salt

This recipe is perhaps the simplest, but requires patience and accuracy.

You only need two ingredients:

• shampoo – 3-4 teaspoons
• salt – just a little bit

It's simple: pour shampoo into a container and add salt (at the tip of a spoon). Mix thoroughly and put in the refrigerator for 20 minutes. Voila! Slime is ready! However, it will not be the same as store-bought: it sticks a little to your hands and is more suitable for playing with your fingers.

Try to use a thicker shampoo. It is also better to take some beautiful color (fortunately there are many of them now) to get a beautiful result. And remember: there should be very little salt!

How to make slime from plasticine

This handgam turns out fluffy and viscous and pleasant to the touch.

You will need:

• transparent stationery glue – 200 ml
• "borax" (sodium tetraborate)
• light plasticine or modeling mass – 20 g

First, in a separate container, mix 0.5 teaspoon of borax and 350 ml of hot water. Mix thoroughly until the sodium tetraborate is completely dissolved. Let the liquid cool.

Pour in sodium tetraborate and fill it with hot water.

In a second container, mix 20 g of plasticine and 200 ml of glue. We tear the plasticine into small pieces and add it to the glue. Stir until smooth. Little by little we add the borax solution to the resulting mass and, as it were, collect the slime in a pile. We do this until it stops sticking. If this does not happen, then dip the resulting mass into the remaining borax solution and then remember it in your hands. Everything should work out!

In a separate container, mix glue and plasticine.

It can also be done in another way.

You will need:

• gelatin
• plasticine

Dilute the gelatin packet according to the instructions and leave for 1 hour. Heat 50 ml of water and pour plasticine into it in small pieces. Stirring constantly, heat until the plasticine dissolves.

Add gelatin to the resulting liquid, continuing to stir until a homogeneous mass is obtained. Let it cool. Here is your handgam!

How to make slime from soap and salt

You will need:

• liquid soap
• dye

The recipe is similar to the shampoo recipe. Add a little dye and a couple of salt crystals to 3-4 teaspoons of liquid soap. Mix all this thoroughly and place in the refrigerator for 5-10 minutes. After that, mix again and you can play! This handgam turns out to be slightly spreading.

In general, you will need the same amount of liquid soap depending on the size of the slime you want to get. If the soap was some beautiful color, then the dye may not be used.

How to make slime from shaving foam

You will need:

• shaving foam
• PVA glue
• borax (sodium tetraborate)
• dye

First, mix water with borax so that it dissolves. Then, into another container, squeeze out the amount of shaving foam of what size handgam we want to get, add 100 ml of PVA glue and mix until the foam becomes viscous and the mass is homogeneous. Add a couple of drops of dye and mix again. Now add the borax solution little by little, continuing to stir until the mass stops sticking to your hands.

How to make slime without:

Most magic gum recipes contain sodium tetraborate, also known as borax, the sodium salt of boric acid, the most common and used boron compound. This substance is sold in pharmacies because has bacteriostatic activity and is not absorbed through intact skin.

It's not expensive. However, what to do if this product is not in the house, you don’t want to go out, and the child persistently demands to make slime? Let's look at alternative recipes.

How to make slime without sodium tetraborate

To prepare such a toy at home, you will need:

• corn starch - 1 cup
• water at room temperature -1 cup
• PVA glue - 5 teaspoons (25 ml)
• food coloring
• glitter (optional)

First you need to dissolve the starch. To do this, take ¼ cup of water and pour starch into it, stirring slowly. You need to stir until all the lumps are removed. Bring the rest of the water to a boil in a saucepan and then add the starch obtained earlier. If you managed to immediately buy liquid starch, then you do not need to perform all these manipulations.

Now you will need plastic bag no holes. Put a third of the prepared starch into it, add a few drops of dye, glitter and pour in PVA. Close or tie the bag tightly and thoroughly “knead” (like dough) its contents until smooth. Drain off the remaining liquid and blot the resulting slime with a napkin.

If the slime sticks to your hands, there is too much glue; if it is hard or crumbles, you need to reduce the amount of starch. Also be careful with the dye: if you put too much of it, the toy will stain your hands. The remaining starch can be used to make magic gum of a different color.

The resulting “product” has a shelf life of about a week.

How to make slime without glue

Handgam prepared according to this recipe is very popular and is similar to butter.

You will need:

• dry starch (any) – 3-4 tablespoons
• dye
• detergent (1 spoon)
• body lotion – 1 spoon.

a) mix detergent and lotion; b) add starch

Mix all the ingredients until you get a mass that does not stick to your hands. If it turns out to be too liquid, then add starch, and if it is too loose, add detergent and body lotion.

a) paint the resulting mass and knead; b) the slime is ready!

How to make slime without starch

You only need one main ingredient: toothpaste. Choose some pretty color.

You can cook it in two ways:

1. In a water bath. Boil water. Squeeze the amount of paste into the container that is the size you want to get magic chewing gum, place the container on water boiling over low heat and stir for 10-15 minutes. Excess moisture will evaporate from the paste and it will become a little loose. We take the resulting mass into our hands, which we first lubricate with any oil (olive, sunflower or baby oil) and knead. In a few minutes the slime is ready!
2. In the microwave. Once again, squeeze out the same amount of paste into the container as the size you want to get the handgam, put the container in the microwave for 2 minutes. Take it out, mix it and put it back in the oven for 3 minutes. Then everything is the same: we take the resulting mass into our hands, which we first lubricate with any oil and knead. Voila!

As you can see, you can make this wonderful toy from almost anything you have at home. Happy experimenting!

Handgam (“hand chewing gum”), slime or the more common version of the name of the toy - slime is loved by children of all ages. Although the fashion for it began a long time ago, it still continues today and its popularity is only increasing. The jelly-like colored substance, according to doctors, helps to calm down, improves neurohumoral processes in the child’s body, develops hand motor skills and reveals the creative talents of young talents. In order not to buy a ready-made toy with an unknown composition, caring parents are considering options on how to make slime themselves. Several simple “recipes” for cooking are in our article.

The most common option, which looks exactly the same as popular toys on the shelves of children's stores, is slime with sodium salt of boric acid (also called borax or sodium tetraborate).

To make it, in addition to ½ teaspoon of the main component, the following ingredients are needed:

• 30 grams of stationery glue, preferably transparent;
• one and a half glasses of water;
• dyes different colors(safer food);
• two small containers.

Step-by-step preparation:

1. Pour 1 glass of water with a temperature of 30 - 36 degrees into the first container, add a measured dose of borax, mix the mixture thoroughly until it becomes homogeneous.
2. The second vessel should be filled with the remaining water (0.5 cup) and glue, add 2-4 drops of dyes (it is better to choose two or three colors, no more). Mix until smooth.
3. Take the first container in your hands and, slowly tilting it, pour the mixture with tetraborate in a thin stream into the second container.

The transformation will take place right before your eyes: from a liquid state, all components will turn into one whole viscous substance. This slime is ready for various experiments that children love to do.

Only parents should carefully ensure that the child does not put the slime in his mouth. After all, the toy, although made at home, has a chemical composition.

For those looking for a recipe with safer ingredients, the handgam version without sodium tetraborate is suitable. There are several types of preparation of “hand chewing gum”.

Materials for the first method:

• potato starch - 200 g;
• half a glass warm water;
• ½ teaspoon food coloring;
• enamel container.

How to do:

1. Pour starch and dye into a bowl and mix them.
2. Add water little by little to the mixture, stirring the contents constantly.
3. The liquid will change consistency gradually during the stirring process: from light jelly to elastic jelly.

Since there are no chemicals in this slime, the toy does not “live” for long. After two days it will become unusable and you will have to make a new slime.

For the second recipe for slime with starch you need to take:

• liquid starch, which is bought for washing, - 70 ml;
• white PVA glue - 25 ml;
• natural dye (you can use gouache paints);
• high density polyethylene bag.

How to make slime:

1. Pour starch into the bag.
2. Add 3 - 4 drops of dye, no more, so that during the game the paint does not end up on the child’s hands.
3. Pour glue into the mixture and tie the bag.
4. Shake it vigorously, mixing the contents, until a large clot appears among a small amount of liquid.
5. Drain the liquid, remove the viscous mass, and blot it with a paper towel. Lizun is ready!

This handmade creation is suitable for play for 7 - 10 days if stored in a closed container.

This method allows you to make a particularly dense and viscous slime, and also relatively safe.

Required ingredients:

• gel toothpaste - 1 tube;
• monochromatic dye - 2 – 4 drops;
• sunflower oil - 10 g;
• small vessel.

Cooking steps:

1. Squeeze the contents of the tube into a container.
2. Add paint to the paste and mix until there are no lumps.
3. Place the vessel on low heat. Stir the contents for 10 - 15 minutes. The excess liquid for the toy evaporates, the remaining substance hardens.
4. Remove from heat, let cool.
5. Using oiled hands, knead the resulting lump thoroughly.

Shaving foam slime

This cooking method is especially popular with children, because the result is a dazzling white handgam.

Of course, fathers are not too happy about this waste of their razor supplies, but the end justifies the means.

For slime you need to take:

• sodium tetraborate - 17.5 ml (3.5 teaspoons);
• shaving foam - 50 ml;
• PVA glue - 30 ml;
• warm water - 100ml;
• 2 enamel bowls.

Cooking process:

1. In the first bowl, mix borax powder (one and a half teaspoons) and water (50 ml) until a homogeneous mass is obtained.
2. Add glue and shaving foam, mix thoroughly.
3. In a second vessel, dissolve 2 teaspoons of tetraborate in 50 ml of water until a homogeneous substance is obtained.
4. Slowly pour the solution from the second bowl into the first. Stir until the lump stops sticking to your hands.

From shampoo and salt

When using this method, the handgam is not too dense, a little runny. But such a recipe also has a right to exist.

For it you need to take:

• any shampoo - 4 – 5 tablespoons;
• non-iodized salt - 2 – 5 tablespoons (depending on the result).
• capacity.

The cooking method is very simple:

1. Place shampoo in a bowl.
2. Gradually pour salt into it, stirring constantly.
3. When the mass thickens, the toy is ready.

Another method of making slime from shampoo requires dishwashing liquid. You need to take 150 ml of both components. For transparent slime, you should choose appropriate materials - without color.

Cooking steps:

1. Mix the ingredients in a bowl until smooth.
2. Place the container with the contents in the refrigerator.
3. Leave for 45 minutes - 1 hour, remove the finished slime.

Such a toy should be stored for more than low temperatures so as not to lose its ductility properties. Therefore, after playing, it is better to immediately put the slime in the refrigerator. Then they can play for a month or a month and a half.

Step-by-step instructions from flour

Even the smallest fidgets can use safe handgam in their games. It’s easy to make, and words can’t express how much joy such a toy brings to kids!

Ingredients for slime:

• flour - 2 cups;
• water - 0.25 cups cold and hot;
• coloring matter.

How to do:

1. Sift the flour through a sieve into a small container.
2. Add cold water, followed by hot water. Under no circumstances should you use boiling water, otherwise the slime will not work.
3. Mix all ingredients until smooth, carefully check for any lumps.
4. Add 2 – 4 drops of dyes and mix. It is better to use natural additives to add color from vegetable or fruit juices.
5. Place the vessel in a cool place (outside in winter or in the refrigerator) and leave for 3 – 4 hours.
6. The cooled mass must be taken out, kneaded in your hands - and it is ready for use.

How to make slime from PVA glue

Most recipes for this popular toy have PVA glue as the main component. It has the desired consistency, color, and also connects all the other components of the slime with each other.

I would like to highlight one particularly interesting method - magic slime. Such a toy will be attracted to a magnet, and with the help of special ingredients it will even glow in the dark.

For it you need to have:

• sodium tetraborate - 0.5 teaspoon;
• PVA glue - 30 g;
• water - 400 ml;
• food coloring;
• phosphorus paint - 2 g;
• iron oxide, you can take a laser printer developer - 2 g.

Cooking steps:

1. Pour borax powder into a container, add 200 ml cold water, mix so that there are no lumps left.
2. In a second container, dilute PVA glue with 200 ml of remaining water until a homogeneous solution is obtained.
3. Add dyes and phosphorus paint to the adhesive solution and mix.
4. Slowly pour the contents of the first container into the second container, stirring regularly.
5. It is not necessary to add the entire tetraborate solution; you should watch the consistency of the resulting mass. If it is normal, you need to stop connecting the components.
6. Add iron oxide to the resulting mixture and mix.

The magic slime is ready. Children watch with delight as the toy is attracted to a magnet and glows in the dark at night, like a firefly.

Plasticine toy

You can make another slime without glue, based on material that children always have in abundance. Plasticine handgams are easy to prepare and relatively safe.

For them you need to have:

• 100 grams of plasticine - can be one color or different;
• 15 g edible gelatin;
• 200 ml cold and 50 ml hot water;
• an iron bowl or other metal vessel;
• plastic container.

How to do:

1. In a metal container, soak the gelatin in a glass of water at room temperature.
2. After an hour or an hour and a half, put the pan on low gas, stirring, bring its contents to a boil and remove.
3. Stretch the plasticine with your hands until it becomes pliable and warm.
4. Place the soft mass in a plastic container, pour 50 ml of hot water, mix, trying to make the composition as homogeneous as possible.
5. Add slightly cooled gelatin to the plasticine substance, mix thoroughly without leaving any clots.

Place the mixture in the refrigerator for 30 – 45 minutes.

This slime can serve its owner for a long time.

To increase shelf life, store plasticine slime in a cool place.

From a glue stick

Components for preparing handgams can be replaced with ones that are similar in composition and properties. So, if you don’t have PVA glue on hand and don’t want to go to the store, you can use a regular school or office glue stick.

What is needed:

• actually, the pencil itself - 4 pieces;
• favorite component tetraborate - 5 mg (1 teaspoon);
• water - 100 ml;
• dyes;
• two containers.

Cooking steps:

1. Remove the rods (adhesive substance) from the plastic pencil case and place them in a glass container.
2. Place the container with the contents in the microwave. The time range depends on the process of converting the mass into a more viscous one.
3. Add food or natural dyes, gouache (2-3 drops each), mix.
4. In another container, make a solution of borax powder with water.
5. Carefully combine both mixtures, stirring the contents vigorously.
6. Until then, it is necessary to pour the tetraborate solution into the glue until the composition of the desired consistency is obtained.

DIY transparent slime

Slime, which looks like a crystal pebble, is not as easy to prepare as previous versions of various “hand-made chewing gums.” But such a toy will become the pride of every child and the envy of friends and classmates.

To do this you will need:

• polyvinyl alcohol (water-soluble polymer) – 100 ml;
• sodium tetraborate – 25 g;
• plastic dishes.

How to cook:

1. Pour alcohol into a container.
2. Add borax powder to it and quickly start mixing the ingredients.
3. It is necessary to continuously stir the liquid for 10 - 15 minutes to achieve the desired effect. It gradually thickens.

The result is a dazzling glass slime.

You shouldn't play with it too often, because the created toy has enough high level toxicity.

Such an extensive list in various ways preparation allows parents and their children to make slime at home from scrap materials.

You can add additional components to the recipes provided: glitter, foam balls, beads, mother-of-pearl... Imagination will help you create new ones interesting options favorite toy. Also, to remove the characteristic smell of glue, you should use aromatic additives or essential oils.

In order for the slime to please children longer, you need to remember the rules for its use and storage:

• After playing, you should wash your hands thoroughly;
• Slime must be stored in an airtight container with a lid - glass jar, plastic bag, plastic container;
• don't put the toy near heating devices, in direct sunlight;
• dried handgam should be put in water for a short time, it will be suitable again;
• you must try to ensure that the slime does not fall on the carpet or other surfaces with pile - this will make it unusable faster;
• Colored “hand chewing gum” leaves stains on clothes that are difficult to remove - you should be careful when playing.

Adhering to such simple rules, you can keep the slime in a condition suitable for play for a long time. This toy will definitely become one of the favorites of any child.