How to use a flat cutter in the country. Ploskorez manual for a garden and a kitchen garden. Mechanization of a cultivator in the subsidiary farm

In this article, we will consider Fokin's flat cutter, or rather, how they work correctly.

Video instructions are undoubtedly more informative, but it is advisable to study the theoretical part so that there are no difficulties in choosing the right tool.

After all, a simple device invented by a good, hard-working person deserves attention and respect.

What is a flat cutter

By design, the flat cutter resembles a broken Lithuanian braid. This is an ordinary handle with a blade that is bent under several planes.

It has several holes in order to fasten at the right angles and adjust to height, specific functions.

Principle of operation and device

There are real flat cutters and "parodies" of a patented tool. Exactly what is called Fokine's work must be hardened, treated against corrosion. It is important to pay attention to the cutting.

This element must be made from a rectangular bar, and not from round timber. Because the device of the tool is thought out so that it works as comfortably as possible.

Round or semicircular cuttings are not intended for Fokin's flat cutter. Therefore, when choosing the right tool pay attention to:

Packaging (triangular shape).
Stamped, necessarily unpainted steel elements.
Bolts (must be included).
Author's instructions.

Note: a primitive tool can be adjusted even for gardeners with disabilities, as well as children. It is important to choose the size of the blade (by weight) and the length of the handle.

Then the principle of operation will be clear. There is nothing tricky here - they weed with a flat cutter, loosen and dig up the soil.

Application

In other words, to say how to use it correctly so as not to get tired and keep up with everything. What is the main thing in the beds? So that the back was unloaded, the knees did not hurt, and the work brought aesthetic pleasure.

And for this we determine the type of soil, since clay, hard areas cannot be easily processed even with such a tool. Before starting work, we must grind the flat cutter.

Flat cutters are suitable for:

Preparation of already dug up land for planting seeds, seedlings.
Production of holes, longitudinal grooves.
Thinning growing vegetable crops.
Weeding.
Hilling.
High cut weeds.
Stripping the trunks of garden plantings for whitewashing.

How to use, sharpen, store

OLYMPUS DIGITAL CAMERA

We are working as a novelty in country tools like this:

We do not bend to the ground. We keep the body evener, with a slight slope, as when mowing with a Lithuanian. What is important for this? Naturally, the length of the handle is for your height.
We hold the handle itself with our hands so that both thumbs look up, and the palms firmly and steadily hold the tool.
When we weed and loosen, we try to go deeper by no more than 4-5 cm. root system weed, keeping the blade parallel to the ground. It's easier to say, we don't crash into the ground like a chopper, but we cut it down.
For successful, simple work, it is necessary to sharpen and straighten the blade.

Kinds

We list everything that can be purchased on the way to the country. Fokine flat cutters are:

Small.
Large.
Large politiki.
Small politiki.
Powerful.
Strong men.

The names are, of course, unusual. But they are designed to guide the length and width of the blade.

How to DIY

To make garden tools, you just need to pick up a strong steel strip of 40 cm, the width of which will be about 4 cm. It's great if you come across a spring from a Soviet car, because weak material will not work.

VV Fokin chose spring steel 65G for his invention. it perfect material for garden tools. Naturally, steel strips (and it is advisable to choose several of them) need to be processed, more precisely reheated. To do this, they collect improvised horns on oxygen.

Under the handle or handle, it is best to take the following breeds:

Pine. Easy to work and process. Affordable, but strength qualities leave much to be desired.
Birch. Heavy, but very strong. To cut out a rectangular handle, you need to sweat.
. A rare type of wood, but does not dry out, almost does not rot. work like this

To make it reliable, it is better to make several holes for fasteners. And do not forget about double-edged, uniform sharpening. It is most correct to initially sharpen on the machine, and already edit for work with a bar manually.

There is nothing complicated in creating, and even more so in buying such a tool. But for convenience, it is advisable to set (customize) as follows: when assembled, the length of the tool should be 15-20 cm below the worker's shoulder. This is a simple rule.

How to work with a Fokin flat cutter, see the tips in the following video:

This is an original and very handy tool for manual processing soil in the garden. Author of this convenient fixture- Vladimir Vasilievich Fokin.

Instructions for working with Fokin's flat cutter

This tool, with skillful use, can replace a chopper, a shovel, a hoe, a scythe. The main direction of work with this tool is the removal of weeds. Namely, their cutting at a depth of 2-3 cm underground.

What does the original plane cutter look like?

This is a metal plate bent in a certain way and having 3 sharpened cutting edges. There is a large and small Fokin flat cutter, which differ from each other in their size and methods of attachment to the tool handle.

How to assemble Fokin flat cutter

A large flat cutter is attached with three mounting bolts. The stem must be rectangular section. On the blade of this flat cutter, there are always three holes for fastening, which makes it possible to change the angle of fastening to the handle. For a person with a small stature, a flat cutter is attached at an angle. For a man of average height (175-185 cm), the blade is attached almost perpendicular to the handle.

A small flat cutter does not need to be so carefully adjusted to fit your arm. It will be easy to work with them in any case, since the length of the blade is small here. Some gardeners are mistaken, thinking that if the tool is small, then the stalk should be small. The main task is not to bend your back during work, so we take the handle for a small blade as long as for a large one. We attach the flat cutter perpendicular to the handle in the right direction (for right-handed-left-handed people) and that's it - the tool is ready to work.

How to use the Fokin flat cutter, watch the video

The use of Fokin's flat cutter

Removing weeds and weeding the beds is carried out with less physical costs, the process takes less time compared to in the usual way soil processing.

Starting to work with a flat cutter, keep in mind that great efforts are unacceptable here. Need - light pressure and smooth movements. To get the desired effect from the work, you need to stand almost evenly and only slightly leaning forward. Hold the tool the way you would hold a scythe.

With light pressure and movement to the right, deepen the front edge of the flat cutter by 2-3 cm (depending on the size of the weeds) into the soil. You need to lead the tool parallel to the plane of the earth. The handle at the same time is almost perpendicular to the surface to be treated. At the same time, the plants are pruned, and you can work up to one meter of soil with one movement without much effort, clearing it of weeds. As we can see, it is much easier to work with such a tool than with a chopper.

If you need to loosen the soil, then you can work in two ways. In the first case, the leading edge plunges into the soil and moves towards itself (as in weeding), then the earth remains in its original place. In the second - raking the soil in its direction with the rear blade. The end side creates the effect of a plow with loosening, but without turning the layer.

In addition, a miracle tool is used to remove strawberry whiskers, when working with hay, they are used instead of pitchforks and shovels, rakes. They even mow grass with a flat cutter, though in areas of a small area where an ordinary scythe does not pass.

Sharpening Fokin flat cutter

Often they sell tools with incorrect sharpening, these are not Fokin's flat cutters, but a fake, falsification. A real flat cutter requires sharpening a maximum of once or twice per season.

A sharp tool is required when cultivating the soil to a depth of 5 cm or more, especially for the entire length of the knife, when forming ridges, mowing weeds when they are out of their “childhood” age, and excess raspberry growth, when hilling, chopping off the “whiskers” of strawberries. Slightly less blade sharpness is needed when cutting grooves for sowing seeds, thinning densely sown carrots, parsley, dill.

How to sharpen a flat cutter

Before sharpening, take a close look at cutting surface- it is sharpened at a certain angle, and it is not taken from the ceiling. The inventor himself says that the harder the surface to be treated, the less acute the angle should be. When you sharpen Fokin's flat cutter, do not make it sharper than it was originally (optimally 40-45 degrees).

Consider the main cutting edge, the longest. It is formed by the intersection of the front surface of the blade (the earth “creeps” along it when the tool moves in the soil) with the chamfer-bevel of the back surface of the blade (during operation, it faces the motionless monolith of the earth). You need to grind only the bevel-bevel, which sharpens the cutting edge. If, contrary to common sense, grind the front surface, then the angle of sharpness of the blade becomes larger, and therefore dumber.

Where to sharpen a flat cutter, tell appearance blades. Basically, the tip of the tool wears out, especially if the soil is heavy, stony. Bar or rotating emery wheel it is necessary to lead along chamfers-bevels. The pressure of the flat cutter on the rotating emery wheel should be minimal so that sharpening proceeds without heating the cutting edge. Otherwise, its hardness and wear resistance will decrease.

For the winter, it is better to lubricate the blade of the tool with something to prevent rusting. Then in the spring the work will go quickly and easily.

The price of this device in 2019 is 410 rubles for a set of two pieces (large and small). This is the cost from the manufacturer.

Flat cutters sold, for example, in Leroy Merlin have nothing to do with Fokin - it's just garden tools another manufacturer. A real Fokin flat cutter can be bought on the official website blagodatmir.ru.

How to distinguish an original from a fake

On the real Fokin flat cutter there is a brand of the manufacturer. There is no hallmark on a normal instrument.
It only comes in black. Painted with plain paint. All other colors blue, brown, green, etc. - clear sign fakes.
All bends and angles on this tool are in accordance with the invention patent. Flat cutter when buying sharp. On a fake, the angles, shapes and method of sharpening are not verified and differ from the original flat cutters.
The quality of the metal is the most important thing in an original instrument. Fokine's flat cutter is made of high-quality structural tool steel that has undergone special processing - hardening up to 40 Rockwell units and sharpening. Such a flat cutter is both hard and elastic at the same time. good tool springy both in the hands and in the garden. But the fake is that the metal is either too soft - the flat cutter bends, quickly becomes dull or too hard - brittle, easily chipped, so it quickly breaks before the first sharpening. Made from stainless steel.
The blade of the tool is sharp. A new flat cutter must be milled and sharpened from all external (upper) sides to the handle.
Bolts and nuts must be attached to each flat cutter (for attaching metal parts to the handle).
The distance between the mounting holes is 7.5 cm
Shanks attached to the flat cutter, special form, flat, birch or pine with two drilled holes 8 mm in diameter. Their length is from 120 to 130 cm.

Only from official representatives you will be able to purchase all modifications of Fokin's flat cutters: a set (large + small), a mighty man, a strong man, a large batten, a small polilok, a disk "To the ground with science", as well as ask about the availability of permits (patents, certificates and etc. with a living seal of the manufacturer)

If someone is going to make a Fokin flat cutter with their own hands, then you need to start with a small model, because it has a much simpler profile.

Fokin's flat cutter is universal device which is suitable for most jobs in the garden and suburban area. In operation, the device requires minimal cost forces. With the help of Fokin's flat cutter, labor costs can be significantly reduced and soil fertility improved.

This tool allows you to spend time spent on the site with benefit and pleasure. With the help of a flat cutter, you can perform 20 types of land work, while remaining in good physical shape. In addition to the main advantages, the device has an acceptable at the price.

Interesting! The flat cutter was invented by Vladimir Fokin after he suffered a heart attack and was no longer able to perform hard physical work. The man created a light and strong tool that became his reliable assistant at their summer cottage.

What is this instrument

The disassembled device consists of a curved bracket with a blade and two bolts (the handle, as a rule, must be purchased separately). Please read carefully before assembling the instrument. instruction and look at drawings a photo presented in the article.

Assembling the tool is easy. The flat cutter itself is installed on a flat handle with a rectangular cross section with rounded edges, making it comfortable to hold in any position. The stalk should be chosen long so that you do not have to bend too low. Its most suitable length is 110-130 cm, for a person with tall can be used up to 160 cm.

Advantages of the Fokin flat cutter:

constant use of the tool significantly improves soil fertility, leaving the soil sufficiently moist, allowing air and nutrients it is better to saturate it;
use the tool on land plot it is very convenient, it is easy for them to work, while working with a flat cutter, the back does not hurt and there is no discomfort;
the flat cutter is universal, with its help you can perform up to 20 different operations by changing the angle of inclination;
a small tool can handle the most inaccessible areas;
the tool requires minimal maintenance, it is necessary to periodically sharpen its sharp edges.

What types of work does Fokin's flat cutter help to perform?

hoe;
cultivator;
plow;
hoe;
hiller.

Partially this device replaces a scythe, a rake, a shovel and a pitchfork. Suitable tool for exercising following works Location on:

Advice! With the help of Fokin's flat cutter, you can remove weeds and grass, collect them in a heap, cut off the whiskers from strawberries, break earthen clods, collect droppings in a chicken coop, and cut green manure.

are clearly demonstrated dacha work in the garden using a flat cutter in video at the end of the article.

Watch the video! Fokin's flat cutter, methods of working with a flat cutter

Types of flat cutters and their application

Today, six types of Fokin flat cutters are produced:

Ploskorez Large - used to prepare the beds for planting. The tool helps loosen the soil to a depth of 15 cm, weed, hill up the bed, and also work around tree trunks;
A small flat cutter is used for quick processing of beds on "light" soils. Perfect for weeding between rows and similar crops;
Krepysh is used for processing clay soils and wholeness. The blade of the device is short and wide, unlike the “standard” tool, so it is much easier to work with such a flat cutter;
The Powerful Flat Cutter is a tool with a wide blade that allows you to hill plants, including;
The Big Polotnik differs from other varieties of the tool in its long and narrow blade, which is used for weeding in large areas under crops;
The Small Polotnik differs from the Small Flat Cutter in that the width of the tip of its blade is already 2 times. Suitable for weeding between rows.

How to work with a Fokin flat cutter correctly

Main principle work with a flat cutter - it must be directed parallel to the surface of the earth, often this rule is not observed.

When working with the device invented by Fokin, the following conditions must be met:

The back should be kept straight, the body - slightly inclined;
When the stalk is in the hands, thumbs must "look" up;
The instrument needs to be set up correctly. The holes on the handle of the Large Appliance are used to adjust it to the height of the user. If the setting is done correctly, the working person does not have to specifically bend, and the device does not get stuck in the ground;
An ordinary, round handle is not suitable for the blade of this device. Requires a special, flat handle, which provides certain place for attaching the blade, offset by 45 degrees;
It is important to properly position the beds. They should not be wide, the rows must be separated by paths.

Rules for sharpening a flat cutter

For some jobs, a perfectly sharpened flat cutter blade is not required. Weeds that do not grow very densely can also be cut with a dull blade, which will pry and pull out the weeds. The effectiveness of the work depends on the level of neglect of the site.

A well-ground device is used for the bulk of work in the garden. You can check the readiness of the tool by checking the cutting edge with your finger to see if it is sharp enough.

At original instrument The surface of the blade is sharpened at a specially calculated angle. If you sharpen at an acute angle, as when sharpening a scythe, then the edge of the Fokin flat cutter will be sharper, but will become dull faster. If the sharpening angle is made obtuse, then everything will happen the other way around. It is best to choose a slope of 40-45 degrees. It should be maintained constantly, throughout the entire time of using the tool.

Healthy! Before sharpening, carefully inspect the cutting edge. During operation, it most often faces the surface of the bed, so it is the edge that should be sharpened. The flat top surface is not worth sharpening, it is enough to remove burrs from it. To do this, it is necessary to process it with a whetstone or file.

Sharpen the tool with electric emery with minimal pressure. Otherwise, the steel from which the device is made will lose its hardness and wear resistance will decrease.

To protect the blade from rust, it should be treated with an anti-corrosion compound for the winter.

How to distinguish a Fokin flat cutter from a fake

Currently on the market for tools a large number of various kinds Fokin flat cutters, which are fakes. Tools are made independently, hastily. Products are of poor quality, unevenly screwed elements made of soft species metal.

To distinguish the original from a fake, you must consider the following features:

The original device is not stained, including the blade, which remains black. The real blade is well sharpened and slightly "springy";
The presence of the letter "F", which is embossed on original models between the holes for fastening, or stickers - a large flat cutter “from Fokin” or a small flat cutter “from Fokin”;
The difference between the two instruments is most visible when they are in the hands. The blade of the counterfeit device is made of soft metal and can be bent by hand.

Distinctive features of a fake flat cutter are minimal equipment, low cost, and a dull blade.

Watch the video! How the Fokine flat cutter works

Relatively recently, a new device has appeared on the market that allows the summer resident to easily cultivate the land. Many have already tried this wonderful tool and were satisfied. We are talking about the Fokine flat cutter. With it, processing the beds will take 2-3 minutes. What are flat cutters, and how to use them? All of these questions will be answered.

Fokina flat cutter description

Surprisingly, many types of work can be done with one tool. It replaces the pitchfork, chopper and cultivator. Externally, this is the most ordinary device that is not very impressive. A flat cutter is a specially curved metal plate that is sharpened on all three sides. The handle for the Fokine flat cutter is rectangular.

Benefits of a flat cutter

Despite its simplicity, Fokin's flat cutter is enough functional tool, which has many advantages over other summer cottages.

In organic farming, the usual digging of the earth is replaced by the processing of the site with a flat cutter. This saves time, power costs and brings only benefits. The thing is that when cultivating the land with a flat cutter, the layers of soil do not turn over. This allows you to save the structure of the earth and all microorganisms, which significantly increases the yield.
It is not at all difficult to work with a Fokin flat cutter. Even a retiree can do it.
With this tool, weeds are destroyed, turning into fertilizer. With constant processing, their roots are left to rot in the ground.

Thus, the benefits of Fokin's flat cutter are obvious. One tool helps to perform up to 30 types of work.

They can easily remove weeds, loosen the ground, hill up beds, cut grooves for sowing seeds and clean livestock buildings. You can do all this without effort and back pain!

In their experience, many gardeners have noticed that the use of a flat cutter increases the fertility of the land, and the crop ripens for several weeks. ahead of time plants are less susceptible to disease.

Types of flat cutters

There are several types of tools that are designed to facilitate work on the site.

Large and small flat cutter

They are usually offered as a set. This set hand tools designed for daily work on the site. The small flat cutter is used for loosening the beds, trimming the whiskers of strawberries, and thinning out dense seedlings. A large flat cutter is used when processing beds before planting, spud potatoes with it, destroy weeds and mow grass.

Mighty

A kind of flat cutter - a mighty one - is used for hilling high beds. This model has a wide blade, with which you can efficiently and quickly spud plants.

Large and small rugs

Large and small tiles

Large and small rugs. This inventory is used for fast weeding large areas. The blades of the weeder are different from traditional blades - they are narrower and longer, which makes weeding efficient.

burly

Krepysh - a kind of flat cutter is used in the development of virgin lands, on clay and heavy soils. The blade of the tool is short and powerful, which greatly facilitates the work of the gardener.

You need to purchase several flat cutters that will be needed to work in the garden. When choosing, you should pay attention to the area of \u200b\u200bthe site and the structure of the soil.

Fokin flat cutter how to work with them

It happens that a summer resident has acquired a flat cutter, and then complains about the purchase. This is due to the lack of skills in working with the tool. Outwardly, a flat cutter is similar to a chopper, but the principle of its operation is different.

Unlike a chopper, Fokin's flat cutter does not hammer beds and does not chop. When working, the blade is buried shallowly into the ground and simply moved along the beds. At the same time, the flat cutter cuts the roots of weeds.
The blades of the flat cutter are sharpened on all sides. They can work in any direction.
When working, you do not need to bend, the body should be slightly tilted. The top layer of the earth during processing should be slightly mowed.
The blade is attached only to a rectangular handle, a round handle does not give an effect when working with a tool. The thing is that the blade mount should be at an angle of 45 degrees. When working, it goes deep into the ground without much difficulty. A round handle will not allow you to make the correct fastening.
For weeding and loosening the soil, the flat cutter is placed flat on the bed, turning it to the left. The worker is in front and leads the tool to himself, slightly pressing on it.
To cut large weeds or raspberries, you need to lift the end of the blade, turned to the left.
You can level the bed, break up clods of earth, and form an edge by holding the flat cutter flat on the surface of the earth, while the blade is turned to the right.
When preparing the soil for sowing and deep loosening, the blade is lifted and inserted into the ground at a convenient angle.

Often problems occur due to incorrect tool settings.

Fokin's flat cutter adjusts to a person's height.

There are mounting holes on the metal part of the flat cutter.

At correct setting tool to work comfortably and quickly, while a large load does not occur.

How to sharpen Fokin's flat cutter

Fokin's flat cutter belongs to self-sharpening devices. But sometimes you need different sharpness of the blades. To do this, use the sharpening of the device.

Sharp blades will be needed for weeding large weeds, hilling, forming ridges. Trimming the whiskers of strawberries and removing raspberry shoots with a dull tool will not work.
Blades of medium sharpness are needed for weeding greens and carrots.

Improper sharpening can damage the tool. For sharpening, use a file, an emery wheel or a universal sharpener.

How to sharpen Fokin's flat cutter

You only need to sharpen the back bevel of the blade. If you sharpen the front, the tool will become even dumber.
You need to start sharpening from the tip of the flat cutter.
When sharpening the tool, do not allow the blade to heat up. This will cause it to wear out quickly.

Fokin's flat cutter needs to be sharpened twice a season.

Do-it-yourself Fokina flat cutter diagrams and description

Unfortunately, a fake flat cutter is often sold on the market. This tool is made without technology and quickly fails. Working with such a device is not a pleasure. If you can not buy a good flat cutter, then it is better to make it yourself.

To make a tool, you need a metal strip. It needs three marks.

The first mark is applied at a distance of 8 cm from the edge of the part. This part will subsequently attach to the cutting.
The second mark is at a distance of 5 cm from the first.
Third - applied 3 cm from the second.

Do-it-yourself Fokina flat cutter

The part that remains - this will be work zone flat cutter. To give shape, the part is bent at the first mark at a right angle. Next, between marks 2 and 3, you need to make a bend in the workpiece. On the part that will be fixed to the handle, you need to make holes.
The resulting workpiece is subject to further processing. The edge of the working part of the flat cutter must be cut at an angle of 45 degrees. This will make it easier to loosen the row-spacing and weeding. Next, the workpiece must be painted with anti-corrosion paint.
by the most milestone in work is - sharpening a flat cutter. It depends on her how effective the tool will be. Sharpening is carried out on the machine from all sides of the workpiece.

The finished workpiece is attached to the handle.

Shank for flat cutter Fokin

Observing all the rules for using a flat cutter, it will become a real helper when carrying out many works in the garden.

26.11.2016 19 590

Fokin's flat cutter - we study the garden tool up and down!

Fokin's flat cutter is a garden tool with which you can easily cultivate the land with minimal physical effort. But gardeners and gardeners have many questions about how to use, is there detailed instructions on assembly, which handle to choose, whether sharpening is needed, etc. You can find answers to all kinds of questions, as well as tips for use and photos in the article when reading.

Content:

What is a tool?

The flat cutter performs two main functions - weeding and loosening. In addition, with the help of the tool, up to 20 works carried out on the ground are performed. The hoe consists of two parts - a bracket with a blade and bolts, of which there are only two. The assembly of a flat cutter is quite easy, it must be bolted to a wooden handle on both sides.

The main action is cutting weeds at a depth of 2-5 cm, while the top layer of the earth remains in place, and loosening occurs without turning the soil layer. Well, what is the advantage of such processing, you ask? The fact is that cultivation preserves the structure of the soil and does not harm living microorganisms that live in the surface soil layer.

In addition, the removal of weeds and weeding of beds is carried out with little physical effort, the process takes less time compared to conventional methods of soil cultivation. It is worth noting that the mechanism does not replace a chopper for working in the garden, so it will be much more difficult to loosen heavy soils.

According to summer residents, the use of a tool on a plot without plowing the land, literally in two years, will make the soil porous, loose. Here they will live earthworms, which has a good effect on fertility, which means that the harvest in the beds will become larger and better. The bent flat cutter plate is sharpened on three sides, so for easy work the blades must always be sharp, otherwise you will not be able to weed the bed quickly and effortlessly.

planting potatoes using a Fokin flat cutter - pictured
Fokin flat cutter when planting potatoes - pictured

AT garden shop, on the market, on the official website, you can see and buy up to 6 types of fixtures - Krepysh, Mighty, Polotik small and large, etc. The most common and purchased are flat cutters, which are included in the Universal kit, consisting of small and large tools. With a small device, the ridges are carefully and quickly weeded, thickened crops are thinned out, with a large one they spud, prepare the ground for planting, mow weeds, etc.

The mechanism must be mounted on a handle, which has a flat shape and wood, this design of the handle allows you to work as conveniently as possible on garden and household plots. A large flat cutter must be fixed in such a way that future work is convenient. The tool is fixed in two positions, while the angle of inclination changes so that the tool can be adapted to your height and work style. The inventory is designed rationally, even for left-handers there is a comfortable position.

How to use Fokin's flat cutter - instructions

What can be done with a Fokin flat cutter in the garden. What work to do and how to use the tool in the work, read on:

➤ Loosening, weeding the ridges is done with a wide blade, while maintaining a distance of approximately one meter from the place where the cutting and soil are held, which is convenient for the gardener, there is no need to bend over. It is recommended to weed at an early stage, until they have gone to explosive growth for easier removal;

➤ To form a bed, you must first loosen the area with a flat cutter, then rake the ground located in the aisles with an inverted inventory. The flat cutter is located with a small blade down, which makes it almost vertical to the ground surface;

preparing the beds with the help of Fokin's flat cutter - in the photo

➤ By moving away from you or vice versa, the soil is leveled when the implement is upside down, without spending extra effort. Using this position of the tool, grooves, beds, etc. are filled up;

➤ Deep loosening of the earth is achieved by hitting the narrowest strip, just the same if the work was done with a plow;

➤ For thinning crops, improving the structure of the soil, they make slotting, stretching a narrow blade, deepening into the soil;

➤ Large clods of earth are broken by the blunt part of the flat cutter (heel);

➤ For mowing adult large weeds, you need to make blows a bend;

➤ It is necessary to dig out the weed, deepen the narrow blade under the root system of the plant and drip it, holding it with your hand;

➤ They even mow grass with a flat cutter. True, in areas of a small area where the spit does not pass;

➤ To pile up the ridges, they rake up the soil alternately on both sides.

In addition, a miracle tool is used to remove strawberry whiskers, when working with hay, they are used instead of pitchforks and shovels, rakes.

Fokin's flat cutter is intended for agricultural work, but not in industrial scale, well suited for summer residents and gardeners who have a lot of beds on the site with various landings requiring separate care. Do not worry if you didn’t manage to process a lot of area the first time and you are tired, you need to get used to the tool and learn how to use it correctly, only in this case the work will be facilitated and minimized.