Electronic homemade products for the garage. DIY projects for the garage: DIY ideas. Recommendations for creating a viewing hole in the garage with your own hands

A variety of accessories for the private garage, designed and manufactured on our own, allow for better and more efficient vehicle maintenance. Their creation requires minimal financial costs. At the same time homemade equipment in most cases, its capabilities are in no way inferior to expensive factory analogues.

Stand for electric drill - simplify the drilling process

In a private garage, over time, more and more different tools and equipment used for maintenance appear vehicle. The owner should ensure their convenient and rational storage in such a way that the most necessary equipment were always at hand, and rarely used ones were hidden away. To solve this problem, you need to draw a basic sketch and create shelves or. Ready-made options There are many such designs on the Internet. And it’s not difficult to come up with a shelving system yourself.

More problems arise when you need some rare homemade items for the garage. For example, many car owners use when servicing their car and performing various works around the house with an electric drill. Often with its help you need to do it flawlessly straight holes with axes strictly perpendicular to the plane of the workpiece. Anyone who has tried to achieve such a result knows that it is not at all easy. As a rule, the holes are skewed. A drill stand can solve this problem. To build it with your own hands, you need to stock up on:

• rod or calibrated tube;
• a platform from a milling cutter (manual), which has not been used for its intended purpose for a long time due to its wear and tear;
• sheets of plywood.

It is also permitted to use another suitable platform as a base for the stand. The main thing is that it is level and has areas where you can install new long guides. The function of the latter in our case will be performed, as you already understood, by metal rods or calibrated tubes. The process of building a rack is truly simple. Let's describe it.

First we cut a box from a sheet of plywood. It must be done precisely according to the geometric parameters of the available drill. Then it is necessary to secure our power tool as securely as possible for drilling holes in the box prepared for it. Fixation is best done using special wing nuts. After this, we make two holes in the box and pass tubes (rods) - guides - through them. We mount a handle on top of them. With its help, we will move the drill to drill holes vertically.

Advice. If you want to control the drilling depth, it is advisable to additionally equip the design with a quick-release clamp. It will act as a movement limiter for the drill. All the work described was done by a more or less experienced home handyman will not cause the slightest problem. And in the end we will get easy-to-use and very useful homemade equipment.

Mini knife sharpening machine - reliable and compact

Now let's try to make a device that will allow you to sharpen kitchen and any other knives. We proceed like this:

1. 1. Take unnecessary sheet metal (in any garage it is sure to be lying somewhere in the corner and waiting in the wings).
2. 2. We fix a threaded bolt in its lower part, and weld a small corner on top of the metal plate.
3. 3. Place a nut on the bolt thread. It serves as a hinge for the lateral movement of our device. With its help you can change the sharpening angle of knives.
4. 4. We weld another one to the described nut. We got a ready-made hole for the rod in the bolt. It is easy to make from thin wire.

The clamp in the machine will be upper part leaf. We make two holes in it. We apply a clamp to the frame. Then we cut another hole. It must be end-to-end (common to the plate and clamp). Next, we make carvings in the bed, taking into account the length of the bars for turning. They are optimally made from artificial diamonds. There is no more wear-resistant and at the same time inexpensive product in nature. And we’ll make clamps for the beams in a couple of minutes from a piece of ebonite or plexiglass.

All that remains is to drill additional hole on the plate, placing it away from the knife, and cut a thread for the bolt with which the tightening will be performed. A compact and high-quality sharpening tool is ready! We put it on a shelf in the garage and use it as needed. Machines made according to the described scheme can be taken with you even on a hike. These garage sharpeners weigh little and take up minimal space.

Crane beam for the garage - let's make vehicle repairs easier!

Maintenance and simple car repairs in home garage are significantly simplified if there is a crane in the room. Look at the photo below. It shows how convenient and useful a garage structure can be constructed without much effort.

We will make the transverse rod from a pipe with a cross-section of 10 cm, the supports for it from pipes 11 cm. Important! Racks homemade design It is recommended to make it from square profile pipes with dimensions of 10x10 cm. They will provide the device with good stability. We attach the rod to the supports with M16 bolts (you can use other fasteners), fix the bevels and the base using a 10x10 cm corner.

We buy a lifting cable at the nearest construction store. We take the rollers for it from the elevator door drive mechanism. Notice! The rollers need to be well secured. This operation is best performed using a narrow (5 cm) metal strip. Lifting of objects on the crane beam will be ensured by a worm hand winch. And don't forget to attach another set of rollers to the vertical posts. They will allow you to move the crane beam throughout the garage without any problems.

DIY compressor - homemade for advanced drivers

Workbenches, hanging shelves and others useful crafts any car enthusiast can build it for storing equipment. It is more difficult to make machines and special equipment. But with the right approach to the matter, it is possible to cope with such tasks. Let's assemble a compressor that can be used for blowing vehicle components and mechanisms, painting a car, and monitoring tire pressure.

We will need a 10-liter air receiver (a device with a slightly larger or smaller volume is suitable), a refrigeration unit (old, not used for a long time), and also:

• adapters;
• inexpensive filter regulator (feel free to purchase the cheapest one);
• oxygen pressure gauge for the receiver;
• fastening clamps;
• hose (approximately 200 cm) designed for 20 bar pressure.

The compressor assembly process is simple. The receiver has outputs at the bottom, middle and top. The bottom one is necessary for draining oil and condensate, the middle one is for installing a pressure gauge. A flow of compressed air is supplied to the consumer through the upper one. We connect all the required elements to the outputs of the device and secure them with clamps. We connect the filter regulator to the receiver panel. Next to it there will be a button to start the unit. Maximum regulator pressure at homemade device should not exceed eight atmospheres, the minimum is two.

It is advisable to additionally equip the compressor with an emergency valve. This inexpensive item will be fully guaranteed safe operation homemade device.

We will place the completed compressor near the wall on a rack or shelf. It will not interfere when moving around the garage, while at the same time being always at hand home craftsman. Advice. The old compressor must be thoroughly cleaned of rust before use. And then buy an aerosol can of paint and paint the unit.

Pulley for adjusting the speed of homemade machines and other crafts

We will briefly describe other popular tricks that are easily made from used tools and unnecessary things. Let's make, for example, a pulley for any machine in the garage. The material for its assembly can be textolite, metal, or plywood sheets. The last option is the simplest:

1. 1. We cut out two larger and one smaller circles in a plywood blank. The diameter of the holes made must correspond to the cross-section of the shaft mounted on the machine.
2. 2. Place all the circles on the screw, use a nut to tighten them firmly. Instead of this fastener, it is allowed to use good glue. It will securely fix all the elements into a single structure.
3. 3. Additionally, we tighten the details of the craft with screws.
4. 4. Use a file or sandpaper to process the homemade pulley, apply a couple of layers of drying oil to it.
5. 5. After drying, place the made device on the chuck of any mini-machine (for example, an electric drill). And we use the tool for our own pleasure, because now we can choose its rotation speed and control the load on the electric motor of the unit.

If necessary, it is possible to make a toothed pulley. To do this, it is enough to cut narrow grooves (tubules) in a small circle. This part of the operation must be completed before assembling the pulley.

If you have an electric jigsaw that is not being used because the blade holder is broken, there is no need to send it to the landfill. Eat small tricks, allowing you to give the instrument a second life. On its platform it is possible to assemble a simple table jigsaw. We take a square of metal and solder a bolt into it. We get a new file holder! Solder it to the old holder.

Then we make a stationary desktop. We take a plywood sheet and cut it to the size of the jigsaw. To the rear plane work surface we attach a stand made of wood (we use hard varieties), install it on the front furniture legs. Next we mount working structure onto a suitable base plate. Use a refurbished and improved jigsaw to your health.

It’s rare that a garage is used exclusively for storing a car, but even one over time acquires a bunch of home-made products necessary for its maintenance. Often it is the garage that serves as a home workshop for its owner. What should you fill it with to make the life of the car owner easier and, of course, save on car repairs and maintenance.

We will talk about homemade products for the garage and home craftsman that you can make with your own hands.

The very first thing, in my opinion, that needs to be created in the garage is a place to store all kinds of small items and tools. These can be racks or shelves that will fit well into the garage interior and help put things in order. They can be made from wooden planks or metal corners, which were left with you during the renovation or construction of the house.

And with the help of magnets you can easily tidy up small parts.

A garage is very useful for storing garden supplies, if space allows, because... not always on suburban area There is a special room for such things. The photo below shows how easy it is to do this using strips and hooks.

It is also convenient to store travel and sports equipment in the garage (after all, not everyone in their city apartment has extra space to store bicycles for the winter).

The following devices on the ceiling save a lot of space in the room:

And most importantly, tires have a special place in the garage. Real home craftsmen can easily make tire holders with their own hands.

And if there is welding machine, then such holders can be constructed from metal corners.

It saves space and keeps the garage clear of clutter. And you can safely create masterpieces in making homemade products for repairing and servicing your car.

Stands and mini-overpasses in the garage

A jack is a standard tool included with a car, but it is strictly prohibited to carry out even minor work under the bottom of the car when it is hung on a jack. And sometimes it is necessary to lift its entire front or back part.

In this case, you can’t do without goat stands.

Sometimes the stands are made in the form of mini-overpasses that the car runs over.

In addition to the general requirements listed below, important element For such stands there is a travel limiter at the front of the structure.

It doesn’t matter what they are made of, but the requirements are the same:

• stable wide support;
• safety margin for the design weight of the vehicle;
• minimum gaps between moving elements for height-adjustable stands.

The video shows the simplest coasters with a drive-in:

Very often, just such a homemade product is not at hand in the garage during repairs that do not require the involvement of service specialists.

After all, they are used to remove not only bearings from the shafts, but also gears, and they will also help press out and press in silent blocks and so on.

A factory-made bearing puller is quite expensive, but making this device yourself is not so difficult:

Even if you don’t have welding, and you need a puller urgently, you can clamp an elongated nut with stops between the strips of the puller body from the video. Or use a design with a powerful plate with drilled holes, as in the photo, where the nuts can simply work against the stop and without welding. But a small welder capable of securing such elements is also useful to have in the garage.

Homemade welding from a microwave transformer for the garage

This is one of the most suitable transformers for conversion into a welding machine. The primary winding in it is standard, only the secondary is altered. Moreover, the wire can be used thinner than in the video offered to you, but preferably with a cross-section of 8 - 10 mm:

The number of turns simply increases. Transformers from low-power microwave ovens produce welds with a power of 0.5 kW, a current of about 250A and an output voltage of about 2V. They are capable of welding 2 sheets of steel with a thickness of 1-1.5 mm.

Such devices can be doubled, increasing the power ratings.

But it is not necessary to saw the housing - you can saw off the protruding turns of the secondary winding and take it out, and simply drag the new wire through the resulting windows.

Also, it is not at all necessary to place the electrodes opposite each other. You can place them side by side, with a gap of 2 - 3 mm. With this device you can weld the wing to the body and do much more.

You just need to modify the holder a little and make it removable.

And for small things, this version of mini-welding using a standard car battery is quite suitable:

Compressor from an old refrigerator in the garage

Despite its apparent weakness, it is a fully functional unit. With its help, you can pump up the tires and, with a little modification, paint the car. It is no weaker than most people who use a cigarette lighter automotive compressors, but unlike them, they can work for much longer.

The main problem with the direct use of this compressor is the presence of a thermostat in its connection diagram as part of the refrigeration unit. It should be disabled:

But installing a fine filter on the outlet hose of a car that catches oil droplets is ineffective; it is better to use more powerful filters with sedimentation tanks for this purpose. The starting relay should be used as standard. The compressor is powered by 220V, which makes it connected to the mains, but in a garage it is a very useful device.

To inflate the wheels, you should put a gun with a pressure valve and a pressure gauge on the outlet hose, because this little thing can create pressure up to 16 atm.

And if you plan to use such a compressor to produce small painting work, then you can’t do without a receiver.

Its role can be played by any sealed container capable of withstanding a pressure of 4 - 7 atm, into which 2 threaded or comb fittings can be inserted. Installation of a pressure gauge in such a system is mandatory.

You can also use a car wheel or even a camera as a receiver. A more stationary version of such a receiver is shown in the video:

But you don’t have to spoil the disk, but make the system simpler.

The pumping hose is connected to the system through a spool, and on the outlet branch there is a mechanism for shutting off the air in the paint sprayer.

Of course you can use and .

But in this case, a shut-off valve should be installed in front of it. But the wheel can also be inflated with a mechanical pump; with a small air flow, such pressure will be sufficient.

The simplest devices for recharging the battery

Having a full-fledged car charger is good, but sometimes it’s quite expensive, especially since cheaper devices can also perform its function. Same with full charge car battery A laptop charger can handle a capacity of up to 75 ampere-hours.

Moreover, there is no need to make any alterations, but simply plug in a 55-watt 12-volt car lamp into the circuit and periodically monitor the battery charge level with a multimeter.

When the indicator reaches 13 - 13.5V, you should stop charging - the battery is fully charged. In addition, it is extremely important not to confuse the polarity. This use of the adapter does not harm it at all.

In general, without any modifications they handle the charging function quite well chargers for 12-volt cordless power tools, and most of them also have LEDs indicating that the battery is fully charged.

An old computer power supply can also slightly recharge a dead battery to a level sufficient to start the car. It has an output voltage of 12V, and to fully charge it needs to be up to 14V, but minor modifications can provide this voltage.

Tire mounting and balancing - homemade products for the home craftsman

Creating devices for independent tire mounting and balancing in your garage is realistic, and will allow you to constantly save quite a lot of money. And you don’t need a lot of equipment for this:

• universal machine for tire mounting;
• balancing device.

Some craftsmen take apart the functional parts of a tire changing machine, but in a garage it is better to combine them, on the contrary.

You will need a paw with a lever for tearing the tire off the rim and a stationary stand with holes for mounting the rim and a central stop pin. The disk can be mounted in various ways, but since you most often have 1-2 cars for personal use, it makes sense to make the mounts for specific wheels. The easiest way would be to drill holes for the bolts locally. The number of levers for removing and installing a tire on a disk can be large, or you can get by with just one – double-sided.

This is exactly what the home master did in the video:

Of course, it would be more convenient to attach such a machine to the base, but on the other hand: when assembled, it will not take up much space in the garage, but will perform its main function anyway.

And yet we don’t trim wheels as often as they require balancing. According to the rules, it should be done at least every 10 thousand kilometers, but this procedure at a service station is quite expensive and therefore few people maintain the established frequency. And its quality does not always meet our expectations, because complex computerized machines are even more expensive to set up and maintain, and the running gear of our cars suffers as a result.

There are 2 types of balancing:

• static;
• dynamic.

The jigs for both are not complicated, but you will need a good turner and a quality bearing for one of them. Static balancing is often sufficient if you mostly drive at speeds no higher than 120 km/h. You need to turn a hub to secure the wheel of your car, it is advisable to do this with one fastening of the part or subsequently carefully balance it by drilling blind holes in the right place.

And the process of static balancing is clear from the video:

The listed accessories for the garage, which are not difficult to make with your own hands, are not the only ones of their kind; there are a lot of other homemade products that simplify the “garage” life of a home craftsman. If you share your options for such devices with us, we will be sincerely glad.

Dear readers, if you have any questions, please ask them using the form below. We will be glad to communicate with you;)

Absolutely anyone can make accessories for their garage with their own hands. With the help of such products, the owner of the premises will free up a lot of space, and tools and equipment will always be at hand.

A workbench is a necessary product in every garage

A homemade workbench should be in every garage. It does not take up much space and makes it possible to comfortably carry out repairs and make useful crafts. Typically a workbench is made from strong wooden planks that are attached to a thick wooden beam or profiled pipe. Often workplace made from steel billets. They are quite easy to cut and fasten into one durable structure using metal corners and universal screws.

To make a workbench, as well as other machines for the garage, you need to draw an accurate design plan. At the same time, take into account the space that will be allocated for the product. It is best to place the structure next to shelves or racks. In the drawing, indicate the presence drawers and shelves. You will store small fasteners and tools in them. You can also attach a compact vise to the tabletop. Having drawn up a plan, start making the workbench. First, we assemble the tabletop.

If you have small room, then there is no point in making a large homemade product for it. You can connect the boards together using good glue and metal ties. As a rule, the tabletop of a standard workbench consists of 5–10 identical boards. Next, we make special grooves measuring 2.5x2.5 cm on the tabletop. They are needed for stops. As soon as the glue on the product has dried, the surface must be planed. The result should be a perfectly smooth coating. The legs for the structure can be made from several bars measuring 80x10x10 cm.

We make grooves in the front legs into which the brackets will be inserted. In the future, the latter will be connected to longitudinal beam countertops. Then we assemble the base of the underframe. It consists of two frames, which are made from 5x10 cm boards. The base is attached to the support, after which the frames are cut into the legs of the workbench by 2.5 cm. At the end, we secure the components with bolts. Then you need to attach the back and side support walls to the workbench. To make them they take chipboard sheets or centimeter plywood.

The last step will be connecting the tabletop and the upper frame. To do this, you should use powerful bolts. Afterwards we apply drying oil to the surface of the workbench. As soon as it dries, we treat the surface with varnish. As a result of the work, you received a stable structure on which you can not only repair spare parts or make various crafts, but also store tools.

Making a rack - about a complex design in simple words

Every driver probably has a lot of large garage equipment that there is no place to store. Where can you find such a place for them so that later you can quickly find the right tool? The correct answer is on the rack. This design will allow you to organize free space and save a lot of time. Similar devices for the garage can be made of wood or metal. The second option is more reliable, but it is quite difficult to implement it yourself.

The first one is much easier to complete, however, in order for the structure to last for a long time, it is worth choosing strong wood species for the work. Beech or oak are perfect for this. Boxes and shelves made from them can withstand significant loads. In principle, the norm for a rack is the ability to withstand a weight of 150–180 kg. In practice, only a few adhere to these recommendations. However, it is definitely worth remembering that the maximum weight of all tools on the rack should not exceed 300 kg. Otherwise, this design will become dangerous for the garage owner himself.

Making a rack with a complex design is very difficult. It requires significant effort, a lot of time and equipment. It is not much inferior to a simplified product, the manufacturing algorithm of which we will consider in more detail. So, the operating procedure is as follows:

1. 1. First you need to take a board 9 cm wide and cut it into pieces of different sizes. In the future, these parts will play the role of supports for the structure.
2. 2. For shelves you will need to take a thicker board. It must be cut into several identical parts.
3. 3. Next, take a board for the base of the rack and mark on it the points at which we will make spacers. They should be located at a distance of 3 cm from the edges of the base.
4. 4. Attach the upper spacer using superglue. We nail the top shelf to it. The same manipulations must be repeated with other spacers and shelves. The bottom expansion part should be attached last.
5. 5. Then you need to turn the assembled product over, tighten the base of the rack with spacers, using screws for this.

After the work done, your rack is almost ready. At the end, all you have to do is clean the surface of the rack sandpaper and treat it with oil varnish. It is best to apply the latter in 2 layers. Attach the structure to the wall with powerful anchor bolts, screwing in fasteners under the upper and lower shelves of the structure.

Cyclonic vacuum cleaner and press - useful homemade products for those who like to tinker

The list of homemade machines and devices must include a press. This clamping device will become an indispensable assistant for every DIY enthusiast. To make a press you will need hydraulic jack, metal platform bed and 4 profile pipes. Two of them should have a cross-section of 4x4 cm, and the rest - 6x6 cm. To make a press, we take two pipes with a smaller cross-section and attach them to the base of the product. At the very top, between these pipes, we weld another pipe with a larger cross-section.

Install the remaining pipe so that it can easily move along the previously installed guides. The device made in this way works on a very simple principle. To connect two products, they need to be placed on the base of the press and covered with a thick plywood sheet. The pipe with the jack installed must be lowered, and then the two short pipes must be turned. By making this simple movement, you will securely connect the two previously supplied products.

The second device is a cyclonic vacuum cleaner, it will help you always keep your garage perfectly clean. To make it, prepare a plastic or metal container. Important nuance– the lid of the vessel must be tightly closed. Next, we make 2 small holes in the lid. The first should be located in the center, and the second close to the edge. The hole diameters and cross-sections of the hoses you use must be the same. We connect the pipes to the holes. The first will serve to collect garbage, and with the help of the second you will connect a regular vacuum cleaner

Install a plastic elbow into the inlet pipe. With its help, air will be sucked into the device, like a cyclone. Thanks to the presence of this elbow, the vacuum cleaner will be able to suck in not only dust, but also small stones, sawdust, lumps of dirt and other small debris. All this will remain in the container to which you connected the hoses. If you wish, you can not equip the vacuum cleaner with a knee. But in this case, you will not be able to remove garbage, only dust. In such a device it is most advisable to use plastic container and narrow hoses. If you need a more powerful device, then you should make a vacuum cleaner from large hoses, an elbow and a steel container.

Device for making ropes - ropes from plastic bottles

When heated, plastic bottles shrink quickly. Thanks to this, we are able to make fairly strong ropes from them. With their help, the garage owner will be able to connect several various products which are used on the farm. To create the device, you need to find two bolts with nuts and washers, a piece of thin board, an electric drill and a utility knife. After that, take two washers and place them in the middle of the board. The centers of the washers should be marked on the board with a marker. We drill holes at the resulting points.

Next we drill holes with reverse side boards. This must be done to prevent rotation during operation of the device. The next step is to screw in the bolts. We are testing the device. We put several washers on the protruding ends of the bolts. The final thickness of the rope will depend on the number of bolts. Next, place a stationery knife or a small piece of it on top of the washers. We secure the device with additional washers screwed in until it stops. Next, the device must be fixed on the desktop using clamps.

Then we take a two-liter plastic bottle, cut off its bottom and cut a strip in the remaining part. We place the latter on the device so that it is located under the knife. Next, we take the strip with one hand and pull it, while holding the plastic container with the other hand. As a result, from one unnecessary 2-liter bottle you will get about 20 linear meters ropes.

How to make a viewing hole - detailed instructions for beginners

Whatever one may say, sooner or later the car has to be repaired. And so that the car owner does not have to crawl under the car and “squirm”, bending double, it is necessary to dig a hole in the garage floor for inspection and repair. First of all, those who want to do this need to mark the area of ​​the room where the car is parked. To do this, the area of ​​the garage is marked with chalk. When creating markup there are several things to consider: important factors. The length of the pit must correspond to the length of the car, and another 1 meter must be added to this value. The width should be such that it is convenient for you to work. However, be careful - this value should not be greater than the distance between the wheels of the car.

The depth of the hole is calculated taking into account the height of the garage owner. Another 20 cm is added to this indicator.

“Having taken measurements”, start digging a hole. Once you've done this, think about the arrangement inside. First of all, this concerns the walls of the pit. For this purpose, brick, building blocks or concrete can be laid on the sides. The thickness of the walls directly depends on the material. So, if you use ceramic bricks, then this figure should be 20 cm. If you purchased cement, then the wall thickness should be 12 cm. If you want to make walls from blocks, then their thickness should not exceed 22 cm.

Do not forget that the walls of the pit will require hydrophobic impregnation. It will protect materials from moisture. Impregnation must be applied with inside bricks or blocks. To make entry and exit more comfortable, we make steps in the front part of the pit. It is best to use cement for this. You need to start from the lowest step, gradually rising higher. Each of the staircase elements must be the same. To achieve this, first measure the height of the rise and calculate the number of steps.

Shelves in the room - for storing loose fasteners and more

Sometimes the garage space does not allow you to make and install a large, spacious shelving unit. In this case, you can make shelves of different sizes. They will be attached directly to the walls at any height convenient for you. This will make it possible to save space on the floor of the room. First of all, you will need to determine where the shelves will be fixed. On the selected section of the wall we make approximate markings, dividing the area into equal squares. Dowels will be screwed into the corners of these squares to hold the shelves.

To screw in the fasteners, drill holes for them using a hammer drill. If possible, it is worth purchasing special dowels with hooks at the ends - they will provide better fixation of the products. Next, we take a thin board and attach hangers with eyes to it. When calculating the distance, be guided by the markings you made on the wall surface. To secure metal hangers, use reliable self-tapping screws. After that, all that remains is to make the shelves. We take several boards and cut them into equal parts - they will serve as bottoms for the products. Then we cut out the walls of the shelves from thicker boards. We nail or glue them to the bottoms. If desired, the products can be painted or varnished.

The final stage will be the installation of finished shelves in the designated places. When installing each of them, carefully ensure that the products stand level and move freely along the guides. If you want, you can glue machined pieces to the front walls of the drawers. wooden handles. It will be more convenient to use the shelves with them. A very interesting idea would be to make shelves from plastic canisters.

If you have a sufficient number of these containers, and in the future you do not plan to use them for their intended purpose, then you can use them according to this principle. First, we cut holes in the outer walls of the canisters. At the same time, make sure that only the right or only the left wall of each container is cut off. Otherwise, the shelves will look inorganic. After cutting out the outer walls, remove any burrs from the plastic. To do this, use a file. After this, all that remains is to install the shelves in place in the wall or use them as drawers in the shelving unit.

Order in the garage means convenient open storage all frequently used tools and compact storage of various small items “in reserve”.

Often the garage and home workshop are combined, so all tools and consumables must have convenient system storage

As soon as the storage system becomes not very convenient for regular maintenance, the garage again turns into a spontaneous warehouse.

It is better to use open shelves to store tools in the garage. It will be very convenient if these shelves are removable.

In the garage of the workshop it is necessary to place not only the usual set of tools for a car enthusiast and a home craftsman, but, sometimes, garden tool, and travel equipment.

Make the most of the entire height of the room. In plastic boxes just under the ceiling and on the floor you can put those things that you use from time to time.

The tool storage system in the garage uses the entire wall area as a stand. Separate sections-shelves for storing tools and consumables.

Wooden guides are used here, but it is better to use metal pipes. If over time the guide we see in the photo crumbles, a box with a heavy tool could fall right on your foot.

You can make such an organizer for storing consumables yourself from sheets of plywood, which are connected with hinges in the form of a book.

A lockable stand-box for home craftsman's tools will allow him to easily maintain the necessary order in the garage.

Metal mesh is convenient for storing paint cans, fertilizer bags, etc.

Metal guides and metal shelves not only ensure safe tool storage, but are also easy to clean.

It is inconvenient to keep a power tool in a company suitcase; it is much more convenient to make such an open stand for storage.

The owner has a lot of necessary little things in his garage, and each of them has its own storage method.

Most tool storage methods are simple, but still more effective.

Very convenient design for storing consumables! The box with self-tapping screws that you use is secured to a separate panel, and upon completion of work, it is pushed into a common organizer.

Each owner has his own scope of activity and different quantities tools. But a convenient organization of work always makes you want to do something more. Take the time to tidy up your garage.

Sliding panels provide additional storage space for tools. Make sure that they will work reliably without getting stuck in the grooves, otherwise this storage method will not be practical.

Simple and convenient. Store your instrument wisely! If you don’t have a garage, and you store all your tools in a small box on the balcony, then even there you can organize a small work cabinet.

Let's continue for the happy owners of the garage. Before us convenient way storage of clamps.

Some storage ideas can be found in stores that sell tools.

But our garage contains more than just tools. We also have pipes, planks, and the necessary pieces of plywood and plastic.

It's not difficult to assemble one like this ceiling structure from pipes and in your own garage.

Large sheets of plywood and drywall are best stored this way - in a vertical position.

For scraps of plywood, plastic, etc. You can make a wall rack like this.

Even a dozen boards can create a mess in your garage. Let's make a simple storage structure.

Another convenient way to store long pipes and all kinds of strips in the garage.

A small workbench can also serve as a storage place for boards and pieces of plywood.

You don't have to clean out your garage in one day. All this can be done gradually, step by step.

Video from the channel “TEXaS TV”. Topic: gadgets and more for the garage. At one time, when the master was just starting to repair cars, money for good tool and there wasn't. Complex and expensive designs had to be made by myself. The author of the channel decided to prepare a review of homemade devices.

Watch the video youtube channel“Hands out of shoulders.” Excellent devices for the garage and cottage.

If you have an old vacuum cleaner lying around, you can put it back into service by repurposing it, for example, a blower. With its help, you can quickly clean dust from some equipment or restore order on the street. Will be needed sealing rubber bands, motor and part of the housing. We redesign the button, leg, handles and get a compact and convenient device. To focus the flow in this case, the fire extinguisher socket. There are probably plenty of other alternatives.

This summer we plan to build a similar dryer at our dacha. It can be used not only for fish, but also for meat, apples, and mushrooms. Cool option. There is a thermostat that maintains the required temperature in the chamber. Air intake from 150 ventilation pipe. It has a built-in heater consisting of two incandescent lamps. Top filter from mosquito net. Fan from a server rack. The outlets are directed to the street.

An interesting design of a milling copier. Movement along shafts with a diameter of 20 mm is carried out using linear bearings.

If you build something from foam blocks, then you have probably felt the beauty of lifting them to the floors. It's still a pleasure. Weight more than 30 kilograms. Simple design gripping together with a winch or electric hoist will make work easier.

An improved version of the vice for welding work. Additional instructions were added to the device, which made it possible to connect parts in 3 planes at once.

At the beginning of May, the busy season begins for summer residents, including potato growers. If you have a walk-behind tractor, then it makes sense to think about automating the harvesting process. Moreover, we have a whole summer to prepare. This digger is of a screening type, but there is no rumble in it as such. This greatly simplifies the process of making the device. Instead, the rods on the ploughshare were extended. The soil with potatoes is picked up by a ploughshare and served on a table made of twigs. The latter vibrates, the soil wakes up through the cracks, and the root crops on the other side fall to the ground. All that remains is to pick it up and put it in a container.

In a private house garden shredder – useful thing. There is no need to think about where to put the cut branches. Secondly, your garden will repay for such fertilizer excellent harvest. The knives are mounted on disks 16 mm thick. Cutting elements made from springs. Hammers for chopping branches to the required size.