Scheme for attaching horizontal blinds to aluminum windows. How to install blinds - step-by-step instructions. What you need to install blinds effectively

In order for window blinds to serve for a long time, it is important to know how to install horizontal blinds correctly, in accordance with technology. Although this task at first glance does not seem to be such a difficult process, there are many nuances that must be taken into account during installation work. If you are not completely sure that you can handle the fastening yourself, contact a specialist.

Necessary tools and preparation

The first thing you need to decide on is the installation method. Installation of horizontal blinds can be done in a window opening, on a frame, to a wall or ceiling. The method of fastening depends on how the measurements were taken. If the overall dimensions of the product are larger than the window opening, then it will need to be mounted on the opening. In this case, you need to decide whether they will be attached to the wall or to the ceiling. If the product is the size of a window, fit into the window opening.

Installation requires the following tools:

• roulette;
• Phillips screwdriver;
• pencil;
• screwdriver;
• screws, dowels and brackets.

Before starting installation work, it is necessary to carry out appropriate markings.

Marking requires special precision, since it is very important that the blinds do not interfere with the operation of the window, and the operation of the window sashes does not interfere with the blinds.

Return to contents

Fastening technology

After preparatory work You can proceed to installation of the product. It is necessary to drill holes using a screwdriver and insert dowels into them in accordance with the markings made. After this, you can begin attaching the brackets with self-tapping screws.

It is necessary to unfold and assemble the device in accordance with overall dimensions Mark with a pencil the places where the brackets are attached. It should be taken into account that the bracket should not get into the place where the clamp or control system is attached. The distance between the brackets should be about 60 cm.

As a rule, the product is mounted on 2 brackets, but when large sizes For reliability and to reduce the load, it is better to attach an additional bracket. It should also be installed near the control mechanism, since it is in this place that the device is subject to the greatest load.

The brackets are designed in such a way that the upper cornice simply snaps into place. The product must be fully assembled before attaching it to the brackets. Having firmly secured the top bar in the bracket, turn its latch counterclockwise until it stops. In a similar way, the product is attached both to the wall and to the ceiling or upper slopes. The only difference is in the method of mounting the brackets. They have holes for both types, horizontally located holes for mounting to the wall and vertically located - to the ceiling or upper slope. After installation, you should check the operation of the mechanism.

If you want to mount the product directly on the frame of a plastic window close to the double-glazed window, you must use fasteners specifically for PVC windows. In this case it does not work usable area windows and windowsill. The blinds fit tightly to the sash and open with it. For this option, installation without drilling is best.

Reading time ≈ 3 minutes

Self-installation Blinds for a plastic window are carried out taking into account the basic requirements: correct selection of the fixation location, correct marking and preparation of brackets. By following the exact instructions, you can complete the job in less than 2 hours. For work you will need: a set of blinds, a drill, bolts and dowels, a screwdriver, a hammer, a tape measure, a construction pencil, a level.

Options for installing blinds on plastic windows

The blinds are fastened according to the design features of the window. If there is a protrusion from the frame to the wall, the product must be fixed directly to the wall.

The absence of a protrusion will result in the blinds being mounted on special brackets above the frame.

Another installation option is direct mounting on each window sash. In this case, fixation can be done using small brackets or PVC staples.

Any installation of blinds on plastic windows begins after marking is applied, allowing you to open the window without problems. Therefore, the distance from the frame to the blinds should be at least 10 cm, but not more than 20 cm. Mini-blinds on PVC brackets are mounted without taking into account these indentations.

Step-by-step instructions for installing blinds

To understand how to install blinds on windows with your own hands, you need to consider their placement. For example, when using PVC brackets can be dispensed with without drilling the frame. This solution allows you to carefully attach products with minimum cost time.

When installing using brackets (for large blinds), the work is carried out according to the following scheme:

1. Above the wall or frame where the blinds will be installed, a distance of 10 cm is marked. When marking, you need to use a level, which will prevent uneven installation of the elements.

2. Above the drawn line, the places for fixing the brackets are determined according to the width of the upper cornice.

3. Using the holes in the brackets, mark the locations for preparing the holes for the dowels.

4. The wall is drilled at the marked points and dowels are installed.

5. The brackets are fixed on the wall, the upper cornice and the blinds assembled according to the instructions from the set are installed in them.

6. Insert the control handle into the hook rotary mechanism, located on the upper cornice (relevant for a design with a cord and a handle).

7. Check the correct installation and ease of opening the window when the blinds are fully folded.

In addition to these instructions, the video attached to the article will also help you become more familiar with the installation details. Expert tips and an accurate description of each step will allow you to complete the job without errors.

They will help you understand how to hang blinds on windows. step by step photos specialist reports. They will help you figure out how to choose the right place and prepare it for installation of the product. The manufacturer's recommendations specified in the instructions included with the kit will be no less useful. A detailed study of them will help to avoid problems in the operation of blinds and maximize their service life.

When installing horizontal blinds yourself, you should additionally purchase a special plate cutter.

This will allow you to carefully remove protruding parts. The main advantage of the auxiliary tool is the rounding of cut edges.

High-quality installation of blinds on windows using PVC brackets is carried out only for mini analogues. They completely cover the window without interfering with its tight fit to the frame. Such products allow for simple arrangement of any premises: bedrooms, halls, studies and offices. Working with such models takes no more than 1 hour. Rules for assembling the product are included in the kit.

Video

Self-installation different types blinds for plastic windows - although a troublesome process, it is economical - on the one hand, and interesting and educational - on the other. Blinds in the house are a unique decorative element that allows you to transform plastic windows and decorate the interior as a whole. But there is one “but”. Blinds cannot be hung in two minutes, like cotton or tulle curtains. This requires a whole arsenal of knowledge and practical skills. Installing blinds with your own hands on plastic windows requires time, certain knowledge and skills. If you are new to this area, take your time with the activity, learn the basics of the design, installation methods and fastening rules, and only then rush into battle.

The ideal option is to invite qualified specialists. The process will be quick, but not financially profitable. Doesn't fit? You don't know how to install blinds on plastic windows, but want to do it yourself? Then we suggest installing them yourself, after first familiarizing yourself with the basic rules and technology.

Blind mounting options

The design of blinds is a complex mechanism that requires not only a share of responsibility on the part of a specialist or “self-taught” person, but also a certain amount of knowledge, skills and abilities. There are many types, they all have common installation basics, but each of them has some nuances that are important to know about. If you take into account the subtleties of each type of blinds, they will last for decades without reminding you of themselves.

Before choosing mounting methods, pay attention to the condition of the walls and their architectural features.

You can attach blinds in one of three existing ways:

1. into the window opening;
2. on window sashes (for each separately);
3. onlay.

Which method should you choose? The choice depends mainly on the wishes of the owner, but also on the design features of the window.

What do you need to know about windows so as not to make mistakes?

Let us pay attention to a common mistake that occurs if you approach the issue of installing blinds on plastic windows incorrectly.

If you have installed horizontal blinds, which look like a solid canvas, on plastic windows towards the slopes, rest assured that you are guaranteed discomfort when opening and closing each of the sashes. This method is incompatible with blinds in the form of solid curtains, since each time you open a window or vent you will have to gather them up and then lower them again. This is a very troublesome task, especially in the kitchen, when plastic windows are opened very often for ventilation.

The solution is to fix the blinds not in the slopes, but on the window sashes.

How to install vertical blinds?

Installation occurs using brackets.

1. Make markings by marking with a pencil the places where you plan to hang them. It is desirable that the distance between them be from 30 centimeters to half a meter.
2. Fix the curtain rod in the brackets according to the instructions included with the curtains and additional elements.
3. At correct installation a clicking sound is heard in the brackets.
4. Do the same with the slats, installing them in the runners until you hear a click. The slats need to be hung sequentially if they have photo printing or a pattern.
5. Connect the lamellas with a chain both from the inside and from the outside.
6. Check the operation of the entire mechanism.

Installing vertical blinds has one, but very significant nuance. It is important to consider the width of the slats. If it measures more than 160 cm, then the number of brackets used must be increased to at least three.

Installation of horizontal blinds

A huge plus of horizontal blinds is that they can be installed on plastic windows of any shape, even skylights no exception.

Installation on frame – ideal option for horizontal slats, allows you to open and close windows separately or simultaneously.

To install horizontal slats, you need to stock up on a screwdriver, a screwdriver and marking material (chalk, pencil or alcohol-based felt-tip pen).

Having decided on the mounting method, proceed to the following steps.

Find out the window sizes(measure width and height).

• If you are going to install blinds in the first way - in the window opening - you should subtract 2 centimeters from the height. This way you will achieve a result when the slats do not touch the window sill.
• If you chose the third method - attaching the blinds with an overlay - add 5 centimeters to the width, but always on each side. In this case, the height is determined by the desires of the owner.
• Installing blinds on windows (on each sash) is considered the simplest and easiest method of installation. The dimensions of the window must be measured taking into account the fittings, that is, so that they do not limit the window or touch it.

Remember: both plastic windows and blinds must function perfectly and efficiently. Therefore, it is very important to take accurate measurements before hanging them.

• Unpack the blinds. Assess their quality, inspect for defects, and check the components. Is everything in place?
• Place the blinds against the window. It is important that the body fits between the boundaries of the beads on both sides of the glass.
• Close the blinds tighter. They must be in the same plane as the window.
• Assess the overall situation. The blinds should be located at the top of the transparent area.
• Visually note the presence of a gap, which very often forms between the fastening elements and the window sashes. The size of the gap can be different and vary from a few millimeters to a couple of centimeters. They do not depend on the correctness of your actions; these are rather the costs of the design of the window and double-glazed window. Manufacturers foresaw the possible risk and, to correct the current situation, equipped the blinds with linings and special elements that allow them to achieve the required thickness and reduce the distance between the fastening elements and the window sashes.

Be sure to pay attention to the marks on the base of the linings. They can be of two types: R (from English word right) and L (left). Right and left application respectively.

• Fix the gaskets until tight pressure is established. Then secure them in the gap between the fastening elements and the window field.
• Mark the fastening.

The geometric shape of the curtains is the main guideline for marking. Be sure to check that nothing prevents the window from opening and closing. Install an additional fastener where the cord is adjusted.

You can attach the blinds using one of two options.

1. Bead mounting. A very delicate process that requires care in choosing the length of the screws. An incorrectly chosen length is the first step towards depressurization of the glass unit, the result is a violation of the thermal insulation properties.
2. Profile mounting- simple and safe process, but requiring care and clear actions.

Remember! The bead can always be replaced, the profile cannot.

• Install the structure

Install the blinds using long screws. It is advisable that you use the self-tapping screws included in the kit. The aesthetic appearance of the window after installing the curtains depends on them. This step must be taken with great care.

• Install the cornice, runners, slats

Place the decorative cornice on the mechanism and secure the plugs on the sides. Using a drill (diameter should be 3 millimeters), make a hole for the plastic “fungi”, they are located in the lower edge of the bead. This will allow you to install the guide line. After pulling it tight, secure it and cut off the excess.

• Control step - checking the functioning of the entire structure

What should you consider?

Do you want to installed curtains served long time, and their mechanism and fastening did not lose their original functions?

Tip 1. When buying blinds, try to ensure that all components are of high quality.

Tip 2. Choose the adjustment mechanism taking into account the convenient side for use.

Tip 3. Make sure that when the windows are fully opened, the blinds fold completely.

Tip 4. Turning the handle should not limit mechanical impact to elements.

Tip 5. Carry out maintenance in a timely manner.

Everything ingenious is simple. Now you are convinced of this. It’s easy to install blinds on windows with your own hands if you have some detailed instructions. Choose for yourself convenient way, use the instructions provided, and tomorrow the windows will “thank you.”

You can attach blinds to a plastic window using two various options. Let's look at the advantages and disadvantages different ways fastenings and find out how to hang blinds with your own hands.

For some interior planning cases, blinds may be preferable to curtains. Their main advantage is the ability to regulate the light output. All you need to do for this is to rotate the slats to a larger or smaller angle relative to the surface of the window. There are two main methods used to attach blinds. Let's analyze their advantages and find out. How to attach them with your own hands.

How to take measurements correctly

First of all, the blinds must be correct size. To do this, you need to decide on the method of fastening. Methods can be divided into two groups:

If you plan to install blinds on several windows, you should measure each opening separately. Although it seems that the window openings are exactly the same, this is not always true. A discrepancy of 2-3 cm can lead to consequences that are difficult to eliminate.

If you plan to install vertical design, it is necessary to measure the height and width of the window opening. You should be careful when measuring, since you can shorten too long lamellas, but add additional elements narrow blinds will be problematic.

If the model has horizontal lamellas, the measurements will be somewhat more complex. If the blinds are attached to the opening, you need to determine what the width and height are. The length of the canvas is selected at your own discretion. You can find both models up to the window sill and long options, reaching to the floor. If necessary, blinds with plastic or aluminum slats are not difficult to make shorter.

When installing directly on the frame, you will need to consider whether the window will open.

If the window is solid and does not open, you can measure the entire width of the opening. If the shutters will open, it is worth ordering a separate structure for each half of the window. Measurements should also be taken accordingly. Measure the parameters of the glass (width x height) and add 20 mm on top and 5 mm on the edges.

When designing blinds attached directly to the frame, make sure that they will not interfere with the operation of the fittings and will not become an insurmountable obstacle to its maintenance (lubrication, adjustment, etc.)

Preparatory work

So, the mounting method has been determined, the blinds have been selected, ordered, manufactured and delivered to the apartment. What to do next? Before you start attaching the blinds to the window, it is worth doing some preparatory work.

First of all, you need to unpack finished product, carefully untangle all the cords, without leaving the slightest knot, and examine the finished product. According to the attached instructions, you must carefully check the completeness, make sure that all structural elements are in place and look exactly as in the instructions.

If at the packaging stage something is mixed up or not included in the box, the blinds will not be installed. It is better to immediately file a complaint with the manufacturer than to look for a replacement or improvise, trying to do without the missing part.

You also need to prepare the window itself. You need to remove all unnecessary items from it. It is worth protecting the window sill and the nearest meters of floor with newspapers from dust and the inevitable debris when drilling. It is also worth making sure that you have reliable support for your feet (stepladder or sawhorse), so that the drill cord allows you to reach all drilling points.

Preparatory work when attaching blinds is not complicated and does not take much time. But if all these operations are not done on time, the installation process can take a significant amount of time and require a lot of labor.

No drilling

Modern plastic double glazed windows allow you to install blinds without using an electric drill. There may be several reasons for choosing this mounting method. For example, under the terms of the lease agreement, it is prohibited to carry out such manipulations in rented housing. Other reasons may be the lack of the necessary power tools, reluctance to tinker with drilling or spoil the surroundings.

First of all, it is worth considering that fasteners without the use of drills and screws are usually less reliable. This means that only lightweight structures can be secured in place in this way.

Usually the lamellas in them are arranged horizontally and are made of thin and light polymer. For heavier models, it is still worth choosing a fastening method using self-tapping screws. You can usually find out whether the selected model can be hung without drilling from the included instructions.

To work, you will need double-sided adhesive tape and scissors. The operating procedure is as follows:

The last stage of installation is attaching the adjustment strips to the block and installing the slats in place. The reliability of the fastening allows the blinds (provided that the model is not too heavy) to hang in place for several years without distortion or separation from the attachment point. However, when cleaning (removing dust from records), you must act carefully so as not to tear off the structure.

If you eventually need to remove tape-mounted blinds, this is quite easy to do. Will help remove traces of glue special liquid(for example, the Anti-Scotch composition).

But if you don’t have a professional solvent at hand, you can use a rag soaked in WD-40 or vegetable oil.

Required materials and tools

Now let's look at fastening with self-tapping screws. It's much more universal option, which allows you to hang almost any model using any mounting method (on the ceiling, in an opening or on the walls).

First of all, you should pay attention to the quality of the fastening elements included with the blinds. Sometimes manufacturers (this statement especially applies to cheap Chinese-made models) include too short and thin self-tapping screws made of low-quality steel. If you plan to attach heavy structures to the ceiling, it may be worth purchasing something more reliable.

Also for work you will need:

• Measuring tools: pencil, ruler with bubble level, tape measure.
• Drill. The drill bit for the drill is usually #6.
• Dowel and hammer.
• Brackets for mounting (usually included with the product).
• Scissors.
• Screwdriver.

Having prepared a set of tools for work, you can begin.

How to hang blinds on plastic windows with your own hands. Step by step instructions

The installation process usually does not cause any difficulties even for those who do this work for the first time. We will look at the operations for installing vertical blinds. Here are the main operations that need to be performed:

• First of all, mark up. The brackets are usually mounted at a distance of 90 - 100 mm from the cornice. Mark the holes for the brackets with a pencil and drill them.
• Insert into the holes plastic dowels. Insert the self-tapping screws into the holes in the bracket and screw them into the dowels.
• Install the curtain rod with the fixed decorative panels on the brackets.
• The runners are assembled according to the instructions given. You need to attach the canvas to them and thread them into the cornice.
• Weights are inserted into the lower part of the canvases. A decorative chain is attached to them.
• Stoppers are inserted into the ends of the cornice and covered with decorative plugs.

The installation of horizontal blinds differs slightly. The main difference is greater sensitivity to strict adherence to horizontal installation.

After assembly, it is important to carefully check the operation of all elements of the system (make sure that you can open and close the blinds, and also change the angle of rotation).

Here are some tips from professional installers:

• Before purchasing, make sure that the kit includes the necessary brackets. For some companies, the price of the kit includes only the canvas, and fastening and adjusting structures must be purchased separately.
• If defects are found, you do not need to try to fix them yourself. Contact the manufacturer for replacement or repair.

The main thing in any work is accuracy and adherence to technology. If you do everything correctly, you can hang the blinds with your own hands, quickly and without much difficulty.

If you decide to install blinds yourself, then you should be prepared for the fact that this is quite a difficult job.

For plastic windows there is a special type of horizontal blinds cassette system— Isolite.

The installation guide will help you install horizontal blinds (not to be confused with the concept of vertical).

The first thing to do is to choose the option of installing horizontal blinds, that is, choose the side on which the control mechanism will be located (this rule also applies to vertical ones).

Window measurement scheme

Then the next step: measurements are taken window openings, on which the blinds will be installed, taking into account the shape of the window openings. It is recommended to take measurements in the middle of the opening being measured and along the edges. This will compensate for possible non-straightness of the walls of the room. It is recommended to take measurements with a metal tape measure. The resulting values ​​should not be rounded.

When measuring window openings, pay attention to whether there are door or window handles nearby, heating devices. Since they can become an obstacle to the installation and rotation of the slats.

Blinds should hang freely and easily rotate around their axis. It is recommended that they do not touch the window sill or other obstacles.

Bracket mounting diagram

To match the width of the horizontal openings, add 20 - 40 mm to the width of the openings. To match the height, about 50 - 70 mm is added to the height of the window opening. This will allow you to take into account that the side slopes of the windows may not be completely vertical.

The next step is to purchase the product strictly according to the measured dimensions.

Once you have purchased your blinds, open the package and find all the parts needed for installation. Namely:

• screws;
• two metal brackets;
• horizontal blinds.

List of tools

• screwdriver or Phillips screwdriver;
• pencil or marker;
• self-tapping screws with dowels measuring 6-8 mm;
• drill for concrete - 6-8 mm;
• battery or electric drill.

Installation instructions

Blinds installation diagram

1. To mark the attachment points, mark these places at a distance of about 60 cm from each other, and about 20 cm from the edges top bar. Having made the markings, keep in mind that the bracket should not come into contact with the caliper, clamp or control mechanism.
2. Attach the brackets to the ceiling, wall or window sash. If you are attaching the product to the ceiling or wall, then attach both brackets (they are marked: left - LH/GH, right - RH/DH) to the top of the opening, retreating about 20-30 mm , mark two screw holes with a pencil. Drill holes 30-40 mm deep with a drill.
3. Secure the brackets with self-tapping screws to the top of the window slope.
4. Insert the profile into the left and right brackets. Attaching to the PVC window frame with hinged brackets can be done without drilling window profile. Here they use special brackets for plastic windows.
5. Turn the bracket latches counterclockwise until they stop.
6. Insert the upper cornice into the brackets and turn the latches clockwise until they stop.

Assembly

Horizontal blinds must be assembled strictly according to the diagram. The slats should be placed along the rope ladder strictly at the same distance from each other. Using runners, attach the slats to the cornice. At the bottom, the slats are connected by a chain. Through lifting mechanism There is a control cord running inside the cornice that connects the slats to each other. Important! Make sure that the runners move effortlessly in the cornice. The cord and rope should also move freely.

Installation is complete. Be sure to check the quality of functioning of your blinds!