Decorative paint «ALLIGATOR - RAUHTEX»

& nbsp; Dispersion paint with roughness effect (under a fur coat).

Environmentally friendly, working with it does not affect harmful influence to your health. Used for interior work when finishing walls and ceilings.

The paint has high filling and covering abilities, is resistant to washing, adhesion, diffuse properties, and is easy to spray.

Application is possible without significant processing of the primer layer. The base used is gypsum, lime and cement plaster, plaster coatings, gypsum blocks, concrete, aerated concrete, horizontal blocks and lightweight structures, ready-made concrete structures.

Manufacturer: i> ALLIGATOR, Germany.

Technicalcharacteristics

Binder dispersion of synthetic polymers

Titanium dioxide pigment

& nbsp; and special thinner

White color, outdated look

Suitable tinting paint

to match color to paint sampleAlligator Optima-color

& nbsp;with a maximum addition of 3 - 5%

Gloss level matte

Specific gravity/ density about 1.480

Thinner & nbsp; water

Application temperature not lower than + 5° C

Consumption 1.0 - 1.5 kg/m2

Storage conditions: in a cool place at a temperature not lower than +5° WITH

Shelf life: & nbsp; 24 months in unopened packaging

InstructionsByuse

1. Windows, doors, etc. should be closed before starting work.

2. The surface to be treated must be dry, clean, and free of grease. Fill any uneven areas with putty. Remove completely old paint, plaster. Apply anti-corrosion coating to visible, exposed metal parts. It is recommended to treat poorly absorbent surfaces AlligatorW.P.Primer paint (thinned 2:1 with water) or i> AlligatorLFPrimer deep penetration orAlligatorW 66 Primer concentrate (diluted 1:4 with water, for highly absorbent substrates 1:6 - 1:8).

3. Mix the paint well, apply generously to the surface and distribute evenly with a roller.

4. For poorly absorbent surfaces, the paint can be diluted by approximately 30% with water. Apply with a brush, roller or spray with a special nozzle.

5. Spraying is carried out with special devices, for example, “Eger-Record”, “plasterer”, spraying devices P. i> F. T. with a nozzle width of 6 - 10 mm. The devices depend on appropriate compressors with an effective air capacity of 800 - 1,000 l/min. For small surfaces, spraying can be done with guns with funnels.

6. The material can be directly sprayed onto load bearing substrates.

7. If necessary, after thorough drying, a second coat of paint can be applied.

8. At normal temperature indoors, overlapping of two layers of paint is possible after approximately 24 hours. At low temperatures Longer drying times should be observed.

9.i> Attention:

- very strong rubbing of paint over the surface leads to disruption of its structure

- strong air circulation and heat sources accelerate the formation of a film, which impairs the quality of painting.

10. After finishing work, rinse the tool immediately with water.

Wise sayings:

With all sorts of government without red tape... - a common expression for business texts, used (with a change in the form of the word) by Sylvester in his message to his son (the final part of the second edition). 84. A typical expression borrowed from the Gospel (Luke, 23, 41, etc.). Wed modern adverb serves it right.

- a monument of Russian literature, literary work in the “educational” genre, a collection of rules, advice and instructions.

Company ALLIGATOR FARBWERKE GmbH

The ALLIGATOR plant was founded in 1959. It specializes in the production of water-based products such as dispersion paints, decorative plasters, primers. Fully automated, computer-controlled production lines, multi-stage quality control of raw materials and finished products allow ALLIGATOR to be one of the leading manufacturers of dispersion paints in Europe.
At the beginning of its existence, the company's production was focused on volume sales, so, for example, the general consumer was served as well as the professional one. In the early 80s in Germany, on construction market market division occurred building materials at the professional and household level (sale of materials through retail chains).
After the reorganization, ALLIGATOR materials began to be positioned and supplied only to the professional market.
ALLIGATOR materials are shipped from the factory directly to a professional construction company or to a specific site. At the same time, the tasks of distributing and monitoring the scope of application of professional materials to objects are carried out by Grosshaendlers, who supervise specific regions of the country.
Only a few manufacturing companies carry out all deliveries construction companies directly from the factory. The company's priority policy is modernization and expansion of production, development of new products high degree quality, led to the fact that the plant became one of the leading manufacturers, as well as to the recognition of the ALLIGATOR brand among professional builders. Innovations introduced by the ALLIGATOR plant have at different times significantly influenced the development of the paint and varnish market in Europe.

Official website of the company - www.alligator.spb.ru

Brand on the portal "Your Home"

Optima color alligator paint. Decorative paint “ALLIGATOR - RAUH TEX. Decorative paint "ALLIGATOR - RAUH TEX"

Packing: 0,75
Package: 1

Kohler paint Tex

DESCRIPTION:
Color paint for water-dispersion paints, resistant to washing.

COLOR:
No. 01 red,
No. 02 orange,
No. 03 yellow,
No. 04 golden,
No. 05 emerald green,
No. 06 blue,
№07 green apple,
No. 08 red-brown,
No. 09 ocher,
No. 10 coffee,
No. 11 black,
No. 13 chocolate brown,
No. 14 green,
No. 15 beige,
No. 16 tobacco,
No. 17 blue sea,
No. 18 burgundy,
No. 19 sea wave,
No. 20 lilac,
No. 21 pink

AREA OF APPLICATION:
Designed for manual tinting of water-dispersion paints (all tones) and facade paints (only tones No. 8-16).
For interior works can be used as an independent paint. Painted surfaces can be washed repeatedly with a soft foam sponge (as indicated on the label)

TECHNICAL SPECIFICATIONS:
Consumption per 1 layer 5-8m2/l, depending on color (color paint consumption as DIY paint), consumption of tinted material - depending on the type of paint and type of surface to be painted
Dry residue About 50% depending on color
Density 1.25 – 1.40 kg/l depending on color
Thinner Water
Application method
Apply by roller, brush or spray.
Drying time at (20±2) °C and relative humidity (65±5)% 1 hour. The next layer can be applied after 4-6 hours
Gloss Matt

INSTRUCTIONS FOR USE:
Preliminary preparation
Clean the surface from loose old coatings, grease, dirt and dust.
To obtain a more durable and durable coating and reduce paint consumption, it is recommended to prime the prepared surface with TEKS Impregnating Acrylate Universal primer.
Conditions for painting
The surface to be painted must be dry and clean, the temperature of the surface, paint and air must be at least 5°C, and the relative humidity below 80%. Tinting
Coloring
Mix color paint with white water-dispersion paint.
The shade of tinted paint depends on the type of material being tinted.
When painting large surfaces, it is recommended to pre-mix required quantity tinted paint in one container to ensure a uniform tone (at least for painting in 1 layer).
Paint with tinted paint in accordance with the application technology. Apply color paint with a brush, roller or spray.

CLEANING INSTRUMENTS:
Wash working tools with water.

OCCUPATIONAL SAFETY:
The paint is fire and explosion proof, has no unpleasant odor.
Avoid contact with eyes; if contact occurs, rinse a large number water, keep out of the reach of children.
Carry out work in a ventilated area.
Use rubber gloves to protect your hands.

ENVIRONMENTAL PROTECTION:
Dispose of empty containers as household waste.
Do not pour any remaining paint into sewers or waterways.

STORAGE AND TRANSPORTATION:
At a temperature not lower than 5°C in a tightly closed container, protected from moisture, heat and direct sunlight.
Shelf life: 3 years from the date of manufacture in original, unopened packaging

Vapor permeable, non-tensioning, dispersive facade paint with high diffusion and water-repellent properties, reinforced with silicone resin. The composition includes algicidal and fungicidal additives. Gives the surface a mineral appearance.

Type of material: Highly diffusible, stress-free dispersion façade paint with mineral appearance surfaces for weather-resistant façade coverings, reinforced with silicone resin.
- Color: White
- Gloss level: Matt
- Density: 1.650
- Binder: copolymer acrylic dispersion
- Pigment: titanium dioxide and special extenders
- Packaging: 12.5 l / 5 l
- Application: for outdoor use
- Properties: Weather resistance according to VOB part C, DIN 18363. The product belongs to class W 3 (low absorbency) and class V 1 (high vapor permeability) according to EN 1062. The product does not form tension and creates an optically mineral coating. Very good filling and resistance to industrial gases. Thanks to a thin layer, it forms high-quality coating. Due to preservative additives, the material is protected from the formation of gray and green plaque.
- Possible tinting paints: Optima-Color tinting and full-color paints. When adding tinting paints, these properties will change.
- Compatibility with other paints: With all Alligator dispersion paints on the same binder base, but still as a result of this the specified characteristics change.
- Dilution: water
- Average consumption: For an accurate calculation, make a test application on site.
- Storage: Store in a dry, cool place, but do not overcool
- Lower limit of application temperature: + 5º C for ambient and substrate temperatures
- Preparation of the substrate: The substrate must be dry, clean and properly prepared: treatment in accordance with VOB, part C, DIN 18363, paragraph 3. Treatment is carried out with the appropriate primer from the ALLIGATOR product range, in accordance with regulatory requirements.
- Application data: head pressure in bar: 200 (120) nozzle size in inches: 0.021 nozzle size in mm: 0.53 spray angle: 50 deg. mesh sieve number: 60 dilution degree: 5% water
- Directions for use: Do not use in case of direct sun exposure, in case of strong wind or with a very hot base.
- Attention: Do not give to children. Do not inhale fumes. It is not allowed to eat, drink or smoke while painting. During the painting and drying process, ensure ventilation. In case of contact with eyes or skin, rinse immediately with water. Do not allow to enter sewers, water or soil.
- Drying time: In dry warm weather after about 2-3 hours - dry to touch, re-paint after about 4-5 hours. In colder weather, increase the drying time accordingly.
- Cleaning of tools: with water immediately after use.
- Disposal: Disposal of liquid residues is carried out through collection points of the relevant city service. Dried material remains are disposed of along with household waste.

Portal sections

Found

More details

Dry mixtures, bulk materials

Paints, enamels, varnishes, plasters, primers, antiseptics