How can you sharpen scissors at home? How to sharpen nail scissors at home? different ways

There is nothing surprising in the fact that those tools that are constantly used periodically fail. Ordinary scissors can also be such - a very popular item. If hairdressing and tailor scissors are blunt, then they are sharpened by experienced master. As for the tools that are used in everyday life, this process is performed without going to the workshop. In order to properly implement it and not harm the instrument, it is important to have information on how to sharpen scissors at home?

How to sharpen scissors at home?

Before you start sharpening, it does not hurt to find out why the scissors refuse to work properly. The screw problem is the most common. To eliminate it, the screw is lubricated and tightened. In order for the scissors to cut well not only the paper, but also the fabric, the screw is first tightened. The main thing in this matter is not to overtighten or weaken it. If the mount is overtightened, then it will be very difficult to work with scissors. With a loose fastening, the fabric is cut in sections.

When thinking about how to properly sharpen scissors at home, you should not rush to apply some "folk" advice. Some of them seriously argue that even non-standard materials can be used for sharpening, for example, glass cup or . The use of such methods in practice can only worsen the condition of the instrument.

Even a file will not help to make scissors sharper. It is often used to sharpen the inside of a blade. The effect of such actions will be completely opposite. If you already use a file, then for sharpening the cutting edge.

1. Primarily, high-quality sharpening obtained using a special machine. When using it, the blade of the scissors is evenly sharpened along the entire length. It should be noted that for this it is necessary to maintain a certain angle.
2. Thinking about how to sharpen scissors themselves, many use the usual emery wheel. It will become an alternative to a special machine, on which the blade sharpens strictly at a certain angle.
3. AT living conditions sharpening is often usually done with a fine-grained stone. In this case, the entire plane of the edge is sharpened simultaneously. A successful outcome is guaranteed only if the master has a “firm” hand. At the time of work, they stock up on patience and do not change the angle of inclination. It is only necessary to remove the burrs from time to time inside blades. How much time it takes to sharpen yourself depends on the skill and diligence of the master.
4. Few people know how to sharpen scissors with foil, although this method is quite effective. The main purpose of the foil is packaging food products. It retains their taste and aroma. But with its help you can easily and quickly sharpen scissors. To do this, you need a thick foil, which is folded several times. After that, the scissors make several cutting movements.

Features of sharpening scissors

In order to sharpen scissors with high quality, we can recommend the following algorithm of actions. The process is best done in several stages:

1. First, the blades are cleaned of accumulated dirt, for which they use cotton wool or a cloth, which is pre-moistened with a solvent. Depending on the purpose of the scissors, dirt, food residues or threads are removed from them. A clean blade sharpens better.
2. For the main procedure, a file or coarse-grained bar is used. After that, the result is fixed by using coarse and fine sandpaper in turn.
3. In conclusion, it does not hurt to slightly tighten the bolt that holds the blades together.

At proper care and compliance with the rules of sharpening, any scissors will last more than one year.

To sharpen scissors at home, you need to correctly calculate the angle at which the blade was originally corrected. This will greatly facilitate the work and reduce premature wear of the product.

Depending on the object for which the tool is intended, the sharpening angle changes. If the materials are soft, such as paper or cloth, then 60 degrees is maintained. For cutting solid objects, this value increases to 70-75 degrees. You can not change the indicators laid down by the manufacturer. If the angle is reduced, the cutting edge will become sharper, however, this will lead to rapid tool wear.

• Show all

  Sharpening methods

  Depending on the type of scissors, various ways. The procedure can be carried out using a grindstone. If such equipment is not available, then improvised means are used. An ordinary bar or file will do. Manual scissors can be sharpened with a needle or foil.

  Coarse-grained, abrasive material leaves traces on the surface of the blade. From this, the quality of the cut only improves.

  Both halves should fit snugly against each other. Between them there should not be a gap of even a tenth of a mm. Otherwise, the tool will not cut. If play is detected, the blades must be carefully brought together. At the same time, it is important to observe the measure.

  If the halves are loosened, when squeezing, you do not need to exert much effort. Edges will dull quickly.

  Grindstone

  By including electric machine, the blade is carefully brought to the abrasive. It is in contact with the grindstone, and it is smoothly led from the end to the ring. After processing one side, proceed to the other. Actions are performed in the same order.

  In order to comply with safety regulations, it is forbidden to work with the machine in gloves.

  

  Sharpening scissors with a whetstone

  

  Bar

  Manual sharpening of scissors can be done using an emery stone, the surface of which is covered with abrasive chips. The process is complicated, but the result is of high quality.

  The procedure is as follows:

  1. 1. The scissors are opened to the maximum width and placed on the bar.
  2. 2. Forward movement is made with effort, and return - without pressure.
  3. 3. The second side is also sharpened.

  

  Sharpening scissors with a bar

  Effective ways to clean a silver cross at home

  Needle

  You can use an awl or a needle. The main thing is that the material is hardened.

  The tool is placed between the blades, and cutting is simulated. The movement of the needle is made from the rings to the very end.

  

  Sharpening scissors with a needle

  Foil

  Kitchen foil or chocolate wrapping is also suitable.

  Folding it in several layers, cut into strips. In this case, dull edges are smoothed out.

  Sharpening scissors with foil

  Metal sponge and sandpaper

  Do not rush to throw away unnecessary metal sponge. First, you can cut it with scissors. In this case, the edges will not only be sharpened, but also cleaned of dirt.

  Instead of a sponge, you can use used sandpaper.

  

  Sharpening scissors using sandpaper

  Working with different types of scissors

  Each type is used in its field of activity. Some tools are made in the form of blades, others in the form of tongs. Accordingly, they need to be sharpened in different ways.

  hairdressing

  It is impossible to sharpen such a product at home. Hair clippers are designed for long-term use. Therefore, they are made of high quality steel with a high degree hardening.

  Sharpening hairdressing scissors special equipment. This is a machine with a laser sight. Replacement disks are included in the kit of such a device.

  Thinning

  Thinning shears are the hardest to sharpen. They include 2 blades - straight and serrated. teeth complex shape. The top has grooves to hold the hair. The sharpening angle of the tooth is 70 degrees.

  They can also be processed only on special equipment. This is a laser angle fixture.

  Cuticle nippers

  Cuticle nippers are sharpened with a file:

  1. 1. First, the backlash in the swivel joint is checked for manicure tongs. If it is, it is eliminated by tapping with a hammer on the plane of the axis.
  2. 2. The same awn is checked for contamination. Cleaned with sandpaper.
  3. 3. The wire cutters are opened, the outer side is placed on the table, and the inner plane is polished with a file.
  4. 4. Then the tip of the blade is sharpened with the same file.
  5. 5. The wire cutters are compressed and the outer edges of the blades are ground.

That ill-fated hour has come when you no longer rejoice in the purchase of brand new nail scissors, but lament over them. Previously sharp as a blade, the working edges have become dull and have ceased to perform their tasks efficiently, causing more discomfort than good. So what to do - throw away a negligent tool or act wiser by modifying it? We think the answer is obvious. ExpertsProstonailthey will tell you how to sharpen nail scissors at home and what is required for this.

Preparatory work before sharpening

Surely the housewives have repeatedly noticed the fact that a dull knife can cut faster than a sharp one. Approximately the same is the case with blunt manicure tools. Having bought once a coveted set in a leather case, you should not rely on its professional suitability for a long period of time. Even if you use your favorite tweezers exclusively for personal purposes, then after 6 months they will become unusable. It is not so difficult to distinguish a tool that requires sharpening, the main thing is to be guided by such indicators:

• partial tarnishing and the formation of spots on working surface edges;
• change in the density of the metal itself;
• deterioration of the cutting ability of the accessory;
• chips along the length of the working edges that interfere with the process of removing the cuticle.

Noticed something from the list on your instrument? Then we recommend that you start sharpening it without putting it off in a dark box, otherwise you run the risk of starting the state of the device too much and after that only a professional grinder who makes ultra-strong spraying can help you. Most importantly, do not confuse the change in cutting characteristics due to blunting with untwisted backlash. Luft is iron bolt connecting the design of the scissors. If it "fidgets" and does not sit tightly in the hole, then you just need to "tighten" it with a universal screwdriver.

Well, it's time to choose a material to help you sharpen your nail scissors. Of course, if the procedure takes place x, then it is unlikely that you will find a diamond stone in your arsenal. There is no need to panic, ProstoNail experts know at least a few more alternatives to this nesseser:

• sandpaper. Surely a small piece of sandpaper will be found in every hostess. Sandpaper is easy to maneuver, the main thing is to choose a material with the greatest abrasiveness;
• aluminum . It is sold everywhere: in supermarkets and household goods, in ordinary local shops and large construction hypermarkets. We are sure that the foil roll has also settled in your kitchen;
• grindstone. Most likely, the probability of finding it in an apartment in an average city dweller is extremely small, but why not try your luck?
• glass jar. Entrepreneurial beauties do not throw away bottles for preservation, but carefully store them somewhere on the mezzanine. Finally, it was their turn. Feel free to take out glass jars with a small neck and get to work;
• pins and/or needles. Such a simple item will be found even in the home of an avid bachelor, to say nothing of girls. A very functional thing, isn't it?
• diamond circle. Last but not least option. This is a classic device that helps to effectively, quickly and efficiently sharpen any steel or metal tool, including cuticle scissors.

Act wisely and don't be fooled by emotions, throwing any spoiled gadget out of sight, out of mind. By the way, a good manicure set costs a lot of money and not every girl can afford to scatter its components. So calm down, relax, brew yourself a cup of fragrant tea, read our tips with pleasure and start restoring the condition of your favorite wire cutters and tweezers.

How to sharpen nail scissors at home

Of course, the simplest and at the same time the most effective method sharpening tools is to take them to a master who will carry out this procedure professionally. But the price for his services is often not at all budgetary, so the girls resort to independent methods problem solving. We do not campaign not for the first, nor for the second option, just say: if you are sure of own forces, then carefully read the algorithm of actions presented below. If you doubt your personal skills, then leave these manipulations to the pros.

For those beauties who ventured into a similar home experiment, we offer several sharpening methods at once. Choose your favorite and go ahead:

• sharpening scissors with a sheet of sandpaper. Perhaps one of the simplest ways sharpening. You will need a small piece of sandpaper used for domestic purposes, as well as the tool itself. Having rolled up the sandpaper in two layers, start cutting it, trying to capture the entire area of ​​​​the sharp edge. With each of your movements, the sharpness of the tool will increase, and the amount of effort applied will decrease. Upon completion of the manipulations, wipe the scissors with a damp cloth to remove metal chips;
• sharpening nail scissors with foil is also not as difficult as it seems at first glance. Having adopted a piece of the roll, fold it several times. Further, repeating the movements of schoolchildren in the appliqué lesson, cut thin strips, pressing the blades harder from time to time. Complete the procedure by wiping the scissors with alcohol and enjoy their original sharpness;
• lucky women who have a grindstone at home will have the hardest time. Alas and ah, such is the truth of life. But, in fairness, we note that this method of sharpening is the most effective. First, use the coarse-grained side of the stone, and then complete the manipulation with a fine abrasive. To make everything go as quickly as possible, prepare the scissors in advance by unwinding their design. This is done by unscrewing the central play connecting 2 parts of one whole. Now you need to put one of the blades inside flat side(which is usually in contact with the other half of the scissors) on the whetstone. Next you have to choose correct angle under which to sharpen the blade. A dozen repetitive movements will be enough to complete the job. To understand that the tool is sharp enough, you can mark the sharp parts of the blades with a felt-tip pen before sharpening. If after the procedure the marks are erased, then the scissors are sufficiently sharpened. The test can also be carried out on a piece of polyethylene, if they do not crumple it and cut it easily, which means that the cutting edges are sharp enough;
• sharpening nail scissors with a needle is a feasible task even for a clumsy beginner. Take a brooch, a pin or a classic steel needle and use scissors to imitate "cuts" on it, making progressive, smooth movements. Watch the blades carefully so as not to get hurt and do not forget to wipe them with a damp cloth when finished;
• sharpening with a neck glass bottle proceeds as described above.

As you can see, the sharpening process is not so complicated, but painstaking. But the result of your efforts will definitely not leave you indifferent. Well, in order to extend the life of your tools, it is enough to follow a few basic rules for caring for them:

• do not forget to clean the instrument from excess decorative gel coating or epidermis residues after each use;
• do not neglect banal lubrication. For this purpose, even ordinary oil can be suitable, which must be applied to the friction points;
• do not use manicure tools for other purposes. Of course, sometimes you want to cut paper or a piece of fabric with nail scissors, but this will only make them dull or even break;
• remember, that correct option storage of manicure tools is only one - in a high-quality, waterproof, durable case and in a horizontal position.

By using our life hacks and following some tips, you will significantly extend the life of your favorite nail accessories to create thousands more incredible designs on your nails.

Are your kitchen or nail scissors dull? Don't want to give them to the masters for sharpening, but you can't do without this tool? It's OK! So that you can return the former sharpness of its blades yourself, let's look at how to sharpen scissors at home.

Experts working with such tools almost unanimously argue that it is almost impossible to sharpen them at home with high quality. It is best to immediately give such products to the workshop, where they will be processed using a special machine. Only such a machine will allow you to get the perfect cutting edge, and is guaranteed not to spoil the tool.

The same methods of sharpening scissors that are used at home (including sharpening with an emery stone) can only marginally improve the situation. But more often they lead to the fact that the blades of the scissors begin to cut the material inhomogeneously, and over time they become even more dull. That is why to folk methods To combat this problem, it is recommended to apply only in extreme cases, when it is not possible to contact the workshop. Let's look at the acceptable sharpening methods at home in more detail.

Method 1 - sandpaper

This is the simplest and affordable option how to sharpen scissors at home, which is recommended in cases where the blades are not very dull. To do this, you will need a small piece of paper. It is advisable to take a sample with an abrasiveness of 150-200, but you can try to work with rougher materials. Next, you will need to cut this paper with about 20 cutting movements, and then simply wipe the blades with a tissue.

Advice:

if you don't have sandpaper handy, you can use steel wool instead, or sandpaper. The effect will be the same.

Method 2 - foil

How to sharpen nail scissors if you don’t have any special tool at hand for this purpose? A sheet of ordinary foil will help you. You will need to act like this:

1. To begin with, a sheet of foil will need to be folded several times so that a dense strip of material is obtained.
2. You will need to cut this strip of material with scissors. If you make a few thin strips, you can sharpen your scissors well, but if you stop at just a few wide ones, just sharpen your tool a little.
3. Next, you just have to remove the remnants of the foil from the blade with any napkin.

Video: how to sharpen scissors with foil:

Important:

you can use this method to keep your blades sharp as well. Use it every time you notice that the scissors have started to cut worse.

Method 3 - sharpening with a grindstone

This procedure will require a lot of time and effort from you, but it will allow you to get a good result if done correctly. It is recommended to contact her for those people who already have experience working with a grindstone. It is recommended to act as follows:

1. First you need to pick up a fine-grained stone for this purpose. Any other kind of it will not only not give you the desired result, but can also spoil the product.
2. Next, you need to determine the angle at which the product was sharpened by the manufacturer. You will need to keep the same angle as you work.
3. After that, you will need to place the blade at a set angle on the grindstone so that it lies on it with the entire plane.
4. When you are sure that everything is prepared for work correctly, you can go directly to sharpening. The movement of the blade itself on the whetstone in this case should be from the stud to the tip of the point along the working surface. You will need to process the two cutting edges of the scissors in this way. On average, all this work will take you about an hour.

Video: sharpening with a grindstone:

Important:

make sure that you do not change the level of inclination of the blade during operation. This will negatively affect the quality of sharpening and in many cases can even lead to damage to the tool.

It is also extremely important during such work to remove all burrs formed from sharpening on the blade. Otherwise, you will get a non-uniform cutting edge.

Method 4 - donkey

How to sharpen scissors correctly if you have a special stone for this purpose? act in similar situation you can like this:

1. First you need to prepare the donkey itself for work. For this, it should be laid out on a towel and poured with special honing oil (this is sold in the same department as the donkey itself). If you don’t have such an oil at hand, you can use any other oil or even water - this will not affect the quality of material processing.
2. Next, it is recommended to disassemble the scissors by unscrewing their central screw. In most cases, this can be done with an ordinary flat screwdriver.
3. After that, you should take the blade, attach it with the inside to grindstone, select the angle of inclination specified by the manufacturer when creating cutting edge, and then slowly run the blade over the grindstone several times. Usually, 20 minutes of work is enough to sharpen it. Repeat this action with the second part of the scissors.
4. Next, you need to assemble the scissors and test their sharpness on the material for which they are intended (for example, on fabric or paper). If you note that now their cutting qualities suit you, consider that the task was completed successfully. If not, you will have to repeat all the manipulations with the touchstone from the very beginning.
5. After completing this process, be sure to wipe the scissors with a napkin to remove any remaining burrs.

Important:

if your scissors are quite dull, use both sides of the whetstone to restore their cutting qualities: both fine-grained and coarse-grained. If they just cut a little worse, the fine-grained side alone will be enough to properly process them.

Method 5 - gypsy needle

How to sharpen sewing scissors without any tools at hand? You can use an ordinary gypsy needle for this purpose. Here you need to act like this:

• To begin with, the needle must be placed between the blades as close as possible to the screw of the scissors.
• Next, you should press the blades on the needle, trying to push it out. Under such influence, they sharpen quite quickly and evenly.
• In the end, you just need to wipe the blades, and you can return them to work.

Important:

remember that this method of working with scissors can work no more than 3 times. After that, you still have to take them to the workshop for sharpening.

Method 6 - jar

How can you sharpen scissors on glass? It's easy to do this:

1. You need to take an ordinary transparent glass jar.
2. Spread the scissors blades so that the jar fits between them.
3. Start cutting the can the way you would cut cardboard or paper. With just a few of these strokes, the glass can significantly improve the condition of your instrument's incisal edge.
4. After such work, the scissors will need to be wiped with a cloth.

Advice:

for such work, be sure to take exactly the bank that you do not mind. The fact is that after such work, scratches may remain on the material that you cannot remove with anything.

How often to sharpen scissors

Understanding how often scissors should be sharpened is not difficult. Normally, this procedure should be performed every few months, depending on the quality of the steel from which they are made. If you use scissors infrequently enough, in some cases they can be sharpened once a year.

With particularly frequent use of such a tool, as well as unsatisfactory storage conditions, they have to be sharpened every month. However, in such cases, it is advisable to have several tools of the same purpose on hand in order to reduce their wear rate.

How to make scissors not dull

So, you figured out how to quickly sharpen scissors at home. Now it is important to make sure that you need to do this procedure as little as possible. To do this, follow these rules for working with this tool:

• Always use scissors strictly for their intended purpose. If you purchased cutting products, do not cut other materials, such as cardboard, with them. In no case also do not use them in cooking. All this significantly reduces the service life of the product and leads to the fact that they easily and quickly become dull.
• Always clean the blades of dust and material residues after use. Get a special cloth for this.
• Make sure the instrument is properly stored. Be sure to keep it in a case. Store such products in a dark, dry place.

Are scissors. Many people believe that branded devices do not become dull, they should not be sharpened. Actually it is not. Even quality tools long time do not require a point, but still there comes a time when it is necessary to improve their work. Sharpening hairdressing scissors is carried out with a special tool.

Features of hairdressing scissors

Hairdressing tools, compared to conventional ones, are distinguished by the presence of sharp tips for high-quality hair capture. They also have high quality steel and sharpening angle. There are 2 straight and thinning.

Straight are used for cutting hair, beards, mustaches. You can use filtering techniques with them. Special thinning tools are used to reduce the volume of curls, thin out the tips, and better shape the haircut.

Technology

Professional hairdresser's scissors are expensive tools that require special skills to sharpen. It has many kinds. The tool for sharpening hairdressing scissors allows you to improve the work of various professional elements: drills, scalpels, knives.

During operation, the minimum layer of metal is removed. Therefore, numerous regrindings will be harmless for the fixture. Nippers after the procedure can be used for 150 manicures. Store ones require updating after 10 clients.

The cutting part of drills and scissors is flat, convex, concave. For example, thinning tools are sharpened only on one side, and a slicer is not sharpened, but polished with a disk. Hot scissors are sharpened by applying electric current to them.

fixture device

The machine for sharpening hairdressing scissors is presented in the form of an electric motor with a shaft, on which there is a faceplate and a grinding disc. There are 2 types of tools: with a horizontal faceplate and vertical. The former are best used for surgical, hairdressing, manicure devices.

Technological machines have a laser "sight" and a manipulator that allows you to set the angle sharpening drills. Even a beginner can work with such a device. It is possible to select the speed of movement of the disk based on the specific type of device. Thanks to the protective visor, harmful dust will not scatter in all directions.

Production and price

High-quality equipment is created in Germany, the USA. It is expensive. The most affordable device without a manipulator costs about 45 thousand rubles. The feature of the equipment is high requirements to mechanics. The runout of the spindle on which the faceplate is located is excluded.

It is important that the abrasive surface moves perfectly, otherwise the required accuracy will not be achieved. The beat rates are indicated in the passport and are equal to no more than 0.11 s. In the workshop, the apparatus functions throughout the day, so the accuracy of the rotation of the faceplate determines the speed and quality of work. A reliable device operates for a long period without wear of mechanisms and bearings. Sharpening hairdressing scissors with it is performed at the highest level.

Characteristics

Machines for sharpening scissors and hairdressing tools have the following characteristics:

1. Parameters: desktop equipment.
2. Reverse: option for finishing tools.
3. Disc parameters: 150-240 mm.
4. Speed ​​setting up to 3000 rpm.
5. Electric motor: power is not more than 300 watts.
6. Weight: 30 kg.

The set consists of additional abrasive discs, a wheel and polishing paste. The legs have rubber pads to dampen vibrations.

Sharpening features

To sharpen professional hairdressing scissors correctly, you must use the following recommendations:

1. Before use, the blades must be cleaned of accumulated dirt. For this, cotton wool or a cloth is used, which is wetted in a solvent. After cleaning, the blade will be sharpened better.
2. For the main procedure, a file or coarse-grained bar is used. Then the result is fixed using coarse and fine
3. At the end, it is necessary to tighten the bolt connecting the blades.

With proper work and care, the fixtures will last for many years.

Choice

In order for the sharpening of hairdressing scissors to be carried out efficiently, it is necessary to choose a quality device. This takes into account the scale of work:

• For sharpening pliers and scissors.
• For processing manicure and hairdressing devices.
• A multifunctional device that allows you to edit a manicure hairdressing tool, drills.
• For straightening clippers.

All equipment listed is considered professional. It is suitable for sharpening drills, tailor's scissors, tweezers, meat grinder knives, cosmetic needles, dental appliances, knives. It should be borne in mind that abrasive wheels from the manufacturer of the device must be on sale.

professional work

Professional sharpening of hairdressing scissors the best option because the master will do everything qualitatively. Since the devices differ in design and purpose, they can be used different types sharpening:

1. Standard.
2. Slicing.
3. Pointing.
4. Semiconvex.
5. Convex.

If there are no skills in working with a sharpening tool, then it is better to give the scissors to the master. After that, the hairdressing device can be used for a long time.

Quality checking

After sharpening, you need to evaluate the type of tool. It is important to pay attention to how the canvases are adjacent to each other. It is necessary to check the progress of the devices. It is lightweight, without jams and jerks. If so, then the work will be of high quality and accurate.

Since hairdressing scissors are used for cutting, it is necessary to check the quality of sharpening by an appropriate method. For example, on your hair or artificial. A piece of cotton wool is used for testing. The result will be noticeable on the cut. A well-crafted fixture will last for many years, delighting with the results of work.