Wired mess: five ideas for storing cables from gadgets. Cable channels for the desk The neatness of the office desk is the key to a fruitful solution to the assigned tasks

The day before, everyone tries, if possible, to foresee the location of office equipment and move it under it. But what if you change provider and the new operator installed your own modem, and this requires additional cable wiring, or you simply moved the location to another room? Don’t just ditch all the walls again, because you can be creative and hide the unsightly cable. In the editor's review of the site there are 5 simple, but effective ways how to hide wires and office equipment in any room, turning them into a unique art object. It's time to eliminate all imperfections and bring the most non-standard ideas to life.

The simplest solution is to install, which today are offered in a wide variety of sizes and shades, but this is too simple. Shouldn't we use decorative clips as fastenings, which will additionally hold and guide the cable? Cute clamps in the shape of leaves and birds are offered for sale; camouflage covers are also produced in the same theme, which can be decorated with bright stickers or drawings.

You can group the wires on the wall in the form of a decorative tree with lush foliage, here artistic skills or will come to the rescue. In a few minutes, the cable will turn from a chaotic tangle into a blooming garden.

You can decorate a cable running along the walls with a decorative fence, and in order for it to lie neatly behind it, you must first secure the wires with zip ties or hook holders with an adhesive base. In addition, the fastening can be made from ordinary Velcro, choosing a color that matches the interior.

Turn wires into art objects

If the length of the wires is very large, and you do not plan to replace them with shorter ones, you can make a real one on the wall, which will immediately attract attention. This design will fit perfectly into a vintage, retro or design; for this you will need a minimal set of tools and fasteners.

Add creativity: just decorate the cable with a bright ribbon, beautiful beads or thick rope - here you can show your imagination to the maximum, it all depends on your creativity. In any case, the wires will be grouped in one place, and not just randomly scattered around the room.

How to secure wires near a desktop

If installed against a wall, you can cover the hanging wires with a beautiful curtain, panel, or secure them with decorative hammocks. For an extension cord that is constantly getting in the way on the floor, a small box is suitable; it will also protect it from dust. Be sure to make several holes in it to bring the cable out.

If you are a device lover, interesting idea for grouping wires - installation on work surface decorative stand in the form of an electrical tower. You can also put an unusual box on the table with holes for the output of wires, which can be easily connected to the equipment at any time. It won’t take up much space, but at the same time, it will hide the clutter and allow you to conveniently organize chargers for gadgets and headphone cables.

New products from manufacturers for fastening wires

Manufacturers help solve the problem of wires and produce original new products. We invite you to familiarize yourself with interesting inventions.

a set of holders for fixing wires, which contains clamps and Velcro of different parameters;
screen with holders for office equipment wires. You can fix it on the back or side wall of the desktop;
install under the countertop additional shelf, and even better - buy a special separator, with which the wires will always be in order. If necessary, you can remove one of them without affecting the others.

How to hide office equipment in the interior: 5 non-standard solutions

Printer, copier, scanner - such a set of office equipment can be found in almost every home. There is not always room for a fully organized work office. Here are some tips from professional designers to help:

movable or module with shelves that can be put under the table and rolled out if necessary. The equipment will not take up space on the desktop and attract attention;
decorative for the printer, in which you need to make holes for wires and paper. It will look very impressive on your desktop or nearby. If a wicker product is not suitable for the interior of the room, you can cover the printer with a beautiful box;
you can place the printer in a desk drawer or chest of drawers;
install an additional shelf under the table and place the printer on it. It is necessary to provide its location in such a way that there is no discomfort for the legs;
disguise the equipment as books by installing it open next to the desktop. Beautiful bindings and folders will distract attention.

Or maybe it's time to purchase improved equipment? After all, printing is no longer so relevant; now it is much more convenient to use a scanner and send documents over the Internet. Therefore, instead of a photocopier and a printer, you need one scanner; it takes up much less space and can easily fit in a desk drawer.

Agree, wires, cables and extension cords are the most annoying things in the house. They create a feeling of clutter, make cleaning difficult and sometimes even pose a threat to our safety because they are so easy to trip over! Ideally, the problem of wires should be solved at the renovation stage: you need to wall up everything that is possible in the walls and cable channels, and also carefully plan the placement of sockets. But if it’s too late to ditch the walls, it doesn’t matter, because there are at least 6 ways to hide the wires. Be sure to try them and you will see how your home will be transformed.

Solution 1. Hiding the extension cord in a decorative box

An unsightly extension cord with a bunch of wires can be hidden in a box with holes cut out on the sides and a lid. It's cheap, simple and practical. There is only one downside - homemade cutouts may not look very neat.

Tip: You can use wicker baskets instead of boxes.

Solution 2. Hide the wires in a special box

Unlike decorative boxes, special boxes for extension cords and cables look neat from all sides, so they can be placed next to the computer, TV, on the desktop or on the bedside table.

Clue:

Finding boxes is not a problem. For example, Ikea sells two models - the standard type and the one in the form of a bag. Cable organizers for wires can also be purchased at Ozon, as well as in hardware stores.

Solution 3. Fix the wires with clips

To organize the chaos of wires lying on the floor or table, secure them to the wall or furniture frame with special clamps.

You can secure the wires using a furniture stapler.

Tips:

Cable clamps are sold at hardware and hardware stores;
To avoid confusion, all wires should be marked with homemade labels as in the photo below.

It is better to use inconspicuous transparent clips, for example, from Command, as in the photo below.

Solution 4. Collect cables in a holder under the table

If you collect all the wires under the table, they will not be visible, and the table will be in complete order.

You can buy this cable holder at Ikea.

Solution 5. Cover the cables with a plastic box

This solution is especially relevant for masking wires near the TV.

Hint: Ideally, the box should be painted to match the color of the wall.

Solution 6. Hiding the extension cord behind the furniture

This can be done using adhesive hooks or good double-sided tape.

The extension cord with chargers constantly gets in the way on the table or under your feet, collects a lot of dust, and also looks unaesthetic. Dealing with this problem is very simple: take a nice box, make a few holes in it and hide all the wires and cables there.

There are also ready-made solutions, such as Plug Hub from Quirky. This is a box made of hard plastic with a rubberized bottom. There are three holes on top for cables, and inside there are three fasteners that can be used to wrap cords that are too long. The Plug Hub can be placed on the floor or mounted on the wall.

amazon.com

2. Secure the wires under the tabletop

To secure the wires and extension cord under the table, you will need binders and screws (their length should be at least a quarter less than the thickness of the table top, otherwise they will go right through and the table will be damaged). First of all, attach an extension cord under the tabletop, preferably in the middle of the table or closer to the wall. Then secure the binders in the required places using screws. Connect everything you need to the extension cord and collect the wires with clamps. Visually the table has become much cleaner and neater.

There is a simpler option if you don't need to hide large number wires To do this you will need a construction stapler. To prevent the long wire from the lamp from dangling under your feet, carefully secure it with paper clips at the table leg. A small extension can also be secured with paper clips. For thicker wires, it is better to use special clamps (for example, these).

Stapler clips aren't your thing? Regular zip ties will do. Secure the wire to the table leg with zip ties. Wires that run along the floor can be covered with plastic or a board that matches the color of the floor. The extension can be secured under the tabletop using wide Velcro: secure it to the back side countertops, and then attach the extension. To prevent wires from dangling under the table, run them through cable channels - they can be purchased at any hardware store. You can fix the channels themselves with electrical tape or a regular plaster.

3. Organize your cable storage

They will help you get rid of tangled wires. proper organization. First, collect cords from phones, players, etc. throughout the house. game console, tablets. Then take boxes (preferably prettier ones), place cardboard dividers inside them, label the location for each cable (so you don’t get confused later) and lay everything out neatly. To prevent the wires themselves from getting tangled, use regular cable ties.

If you don't want to bother with boxes, buy a basket and accumulate more bushings from toilet paper.

If the wires don't bother you, you can simply attach a label to each one to make it easier to distinguish between them. For example, like this:

4. Keep all necessary wires at hand

We can’t hide all the cables in a box: we need some of them almost constantly. The solution is simple: secure them to the edge of your desktop so that if necessary, you can reach out and connect the device to the desired wire. Sugru will help us with this - plasticine-rubber and one of the most irreplaceable things in the household. Don't believe me? Then take a look.

Roll Sugru into small balls and secure them to a table support. Then use a utility knife to remove some of the plasticine (be careful, try not to deform the balls too much). Life hack: to prevent the plasticine from sticking to the blade, first rinse it with soapy water. Then adjust the shape a little with a sushi stick or toothpick to create neat hollows (they should be slightly wider than your wires). Everything is ready, you can fix the cables.

There is an option for those who know how to work with wood. A small block with holes will help organize all the wires on your desktop.

The simplest solution is to pass the wires through binders attached to the tabletop.

hexjam.com

5. Don't hide wires

Seriously, if you get creative, cables can become interesting element decor.

Do you dream of order in your home, but something always prevents you from achieving perfect cleanliness? Start with the little things! After all, nothing spoils appearance home like a bunch of wires scattered throughout the apartment. To solve this problem once and for all, we've put together 5 cool cord storage ideas that will help you quickly get rid of endless clutter.

Decorative coil

An ordinary spool of thread is ideal option for storing thin earbuds. Simply wrap the headset cord around the bobbin and place the earbuds inside the cone. This storage system is compact and versatile. It is easy to take it with you by throwing the organizer into your bag or pocket. And most importantly, such an organizer will probably be found in every home. If not, you can find a nice reel at any craft store. Try this life hack and you will quickly forget that your headphones were ever tangled.

For longer wires you can easily make a coil larger size with your own hands. To do this, you will need two unnecessary CDs and an empty reel of tape. Glue the discs to the reel: top and bottom. And that's it - the organizer is ready. If desired, you can decorate the reel using decorative paper, paints or beads. All that remains is to wind the cord and make a mark on one of the disks.

Leaf ties

If you want to securely fix the cords sticking out randomly throughout the apartment, then original decorative ties in the shape of leaves will come to the rescue. Such clamps will help not only restore the long-awaited order, but also decorate the interior. To get rid of the mess that wires from your computer, TV, and other network-connected devices create, tie several cables together and wrap them with a zip tie. Secure with a special fastener located at the end of the clamp. Ready! Without protruding wires, the room will look much neater, and green leaves will give the interior freshness and lightness.

Ties can also help neatly organize wires stored in boxes or containers. It is enough to bend each cord in half and secure it with a clamp. Now the cables will not get tangled during long-term storage. By the way, clips for bags of bread, ropes and even beads can act as clamps.

Homemade organizer

You will need a regular shoe box and a few sheets of cardboard. On the agenda is an organizer with cells that will help you neatly sort a large collection of wires.

So, take cardboard and cut out several rectangles from it so that they match the height of the box and are a few millimeters shorter in length. If desired, you can cover the cardboard with decorative paper, fabric, or decorate it with acrylic paints. Next, make several vertical slits on each rectangle. Each cut should reach the middle of the cardboard.

Make markings inside the box for future partitions. And assemble the inner lattice by connecting the rectangles along the cut line. All that remains is to glue the finished cells to the box using superglue or double-sided tape. Don't forget to label each compartment. Let the glue dry and that's it - you can fold the wires and put the organizer on a shelf or in a desk drawer.

If you don’t like DIY projects, you can easily purchase a similar organizer in hardware stores. There you will find huge amount organizers with cells, made in different sizes, colors and from different materials.

Cosmetic bag with pockets

There is nothing easier than hiding the wires in a textile cosmetic bag with small pockets. If you use such an accessory to store wires, then rest assured that your desktop is reliably protected from clutter. Simply fold the cables and place each one in its own pocket. And in order not to mix up the cords, make markings using colored adhesive tape.

The textile organizer is convenient and roomy, and it also helps save a lot of space. After all, you can roll it up and put it in a drawer, or you can unfold it and hang it on a hook. With such an assistant, you can organize the storage of wires anywhere: on the wall, in the table, under the table, on the cabinet door, and so on.

Instead of a cosmetic bag, you can use a case for storing brushes. By the way, needlewomen can sew such an organizer with their own hands. Simply sew a wide elastic band to a piece of thick fabric, leaving small gaps along the seam. These spaces will serve as pockets for storing wires, and the elastic band will securely fix them in one position.

Cardboard tube cells

Cardboard tubes - very light and budget method organize wire storage. This is another variation on the theme of containers with cells. Storage compartments can be made from toilet paper rolls or sheets of cardboard. It is enough to take a few toilet paper rolls as a basis or roll sheets of cardboard into a tube and add a little originality to the future product.

There are plenty of decor options. Cardboard can be covered with paper or fabric. You can wrap each tube with jute rope or coat it with spray paint. You can even add decoupage. In a word, there are no barriers to creativity here.

After the design is completed and the paint and glue, if any, have dried, we begin assembling the organizer. There are also several options: superglue, double sided tape or rope. Depending on the chosen method, we simply glue the cells together one at a time or collect them together and wrap them tightly with rope.

All that remains is to choose where to place the finished cells. Perfect for this purpose plastic container or carton. However, if you don’t have anything like this at hand, you can simply put the cells in a desk drawer.

This organizer is useful for storing large chargers, and for thin headphones. And so that not a single wire gets lost, label each tube with a marker or stick a paper label on it.