Applications and types of edge trimming machines: double-saw or single-saw. Do-it-yourself edge trimming machine drawings Wood edge trimming machines and accessories

Any wood processing enterprise, from small to large, faces the problem of a large amount of waste when processing logs. The sawmill produces a rough cut of the log, cutting it to a square beam, and then, if necessary, cutting it into bars or edged boards of the required size. It is not rational to process rounded waste on a sawmill.

However, this waste can bring a lot of benefits and additional profit. Edged boards of small thickness, glazing beads and many other useful products are made from them. It is for this purpose that an edge trimming machine is installed at every woodworking enterprise.

1 Application and operating principle

Each woodworking enterprise tries to reduce production waste to a minimum and use wood as rationally as possible. Edge trimming machines allow you to perform these tasks.

Most often, equipment is installed on sawmills domestic production, such as Data Center 450, Taiga, Kedr, etc. IN living conditions often use machines made with their own hands from scrap materials.

This equipment allows you to trim the rounded edges of shalevki and slabs and get an edged board. The edge trimming machine also allows you to cut boards into bars and blanks with a thickness of 5 mm or more. Such products are in great demand, because they are used in construction and decoration.

1.1 Design features

It is quite difficult to unambiguously describe the design features of wood cutting machines, since edge trimming machines have large number classifications.

According to the method of powering the engine, the equipment can be:

electrical;
liquid fuel

The sawing unit can move along the guides manually or automatically using an electric drive.

According to the number of saws, an edge trimmer can be:

single saw. Allows you to make one cut in one pass. To trim the second side, the workpiece must be rotated;
two-saw. In one pass, the board is cut on both sides. On the domestic market they are represented by the models Data Center 450, Taiga K2M and many others;
multi-saw One pass of material work surface allows you to immediately cut the shalevka into bars or boards of the required size.

Any machine consists of a bed on which workpieces and carriages are placed with a motor that rotates the circular saws. It can cut workpieces of any length and width, which greatly simplifies work and reduces the amount of production waste.

1.2 Operating principle

In general terms, any edger for wood such as TsOD 450, Taiga and others - single-saw, double-saw or multi-saw - works the same. Fits on the frame wooden blank, along which one or more circular saws moves. The carriage on which the saws rotate moved manually by the machine operator for special handrails.

The DPC 450 single saw requires two passes to cut edges on both sides. As a rule, such equipment is designed in such a way that trimming can be done by moving the carriage in both directions.

A two-saw machine, the circular saws on which rotate in different directions, cuts on both sides at once, thereby significantly increasing labor productivity.

Multi-saw edge trimming machines are designed for sawing wood blanks into bars or boards of the required size. This unit can simultaneously operate up to 14 circular saws in parallel.

A two-saw and multi-saw edger such as TsOD 450 or Taiga requires adjustment of the distance between the saws. This process on older models is performed mechanically, with your own hands.

New sawing machines woodworking equipped electronically controlled, allowing you to automatically position the saws in in the right position accurate to the millimeter. In addition, new models such as Data Center 450 or Taiga are equipped with a laser ruler for setting workpieces and switching saw rotation speeds.

1.3 How does an edge trimmer work? (video)

2 Common models and manufacturers

On the domestic market you can find edge trimming machines of various modifications of domestic production. This is due to both the cost and quality of the units. Foreign models are less common, but they are much more expensive.

Among single saw machines for wood the most popular brands are “Cedar” and “Taiga”.

The two-saw machine is represented by the models TsOD 450, Taiga K2M, Avangard, etc.

Most wide choice, both among domestic and foreign manufacturers of multi-rip machines.

Domestic production includes multi-saw units:

Taiga SDM-1;
Aster;
Vanguard;
Stiletto and others.

Foreign manufacturers offer the following models:

MS Maschinenbau (Germany);
Wood-Mizer HR1000 (Germany), etc.

2.1 Making a machine with your own hands

It is very difficult to make a two-saw unit with your own hands. And it’s unlikely to be needed for domestic purposes. Therefore, let's look at it step by step, how to make a single saw edger on wood with your own hands.

Let us note right away that the production of such a unit will be quite expensive. But if you have a lot of unnecessary metal products, old engines and other things lying around in your home, then it’s quite possible to take on such work.

To make an edge trimmer we will need:

Metal pipes, channels and angles.
Electric motor.
Shafts, for example, from agricultural machinery.
Circular saw.
Tools for working with metal (grinder, drill, welding machine).
Connecting elements (bolts, nuts, couplers).

2.2 Stages of work

First you need to make a strong, reliable, stable frame with your own hands. A poor-quality bed leads to vibrations, which, in turn, causes crooked cuts and damage to the saw. Suitable for making a desktop metal channels.

We will make a frame with parameters 6500×2500 mm and a height of 1000 mm with our own hands. To do this, we need to weld a frame from channels and weld the legs to it.

Using the letter “P” we weld metal channels to create a carriage and weld a crossbar on which the saw will move.

We install the engine. His choice must be approached especially responsibly. When using circular saw with a diameter of 250 mm, we will need a motor capable of providing a rotation speed of at least 5000 rpm.

We attach the motor to the bed so that it rotates the saw parallel to the longitudinal edges of the bed.

All welded and bolted connections must be made with your own hands as reliably as possible. Do not forget that the rotation speed is high, and, therefore, the likelihood of serious injury is also high.

The edge trimming machine is designed for removing edges from the surface of wooden blocks and boards. This operation can be done on an ordinary band saw. But at the same time, it is difficult to achieve precision processing and create a product with the required geometry parameters.

Design of edge trimming machine

Before you start making an edger with your own hands, you need to familiarize yourself with the specifics of its layout and design. This woodworking equipment is mandatory for completing specialized production lines and is intended for pre-treatment of lumber before sanding.

Edge trimming machines have standard equipment. They consist of a frame that performs two functions. It houses mechanisms for sawing, and can also serve as a conveyor for feeding workpieces. Alternative option is the rigid fixation of a wooden part on the surface of the working frame.

Depending on design features differentiate following types woodworking edge trimming machines:

method of supplying materials - manual, automatic or semi-automatic. Manual models are simple in design, but have a low performance indicator. They are the best option For self-made;
by the number of saw blades – single and double saw blades. The former are intended for one-sided processing and are used extremely rarely. The optimal result is achieved after using two-saw models, since trimming occurs simultaneously along two edges of the workpiece;
movable or stationary carriage with saw blades. To make homemade woodworking equipment, it is recommended to make a subcutaneous carriage. This will allow you to control the processing process. But factory models are made with a fixed carriage. This helps improve productivity.

Additionally, a manual woodworking machine can be equipped with a system for removing cutting products - chips and wood dust. To do this, you can use a standard chip vacuum cleaner or its equivalent.

The optimal power of the power plant should be 4 kW or more. This is necessary for simultaneous processing of workpieces using a manual two-saw woodworking machine.

At the first stage, it is necessary to draw up a design diagram of the equipment. It must include an accurate drawing indicating the location and main characteristics of the constituent elements. Without this, it will be impossible to make a high-quality and reliable edge trimming machine.

The best option for self-production would be a design with a movable carriage. To implement it, you can use a two-saw or four-saw cutting unit controlled by a manual mechanism. The latest edge trimmers will be able to form two workpieces in one pass. But at the same time, they will require a powerful power plant to operate.

Structural elements of manual woodworking equipment:

support frame. The workpiece will be fixed on it. It is best to make it welded from profile pipes square section. The upper ones will be designed to move the carriage. Roller guides are attached between the side machines. With their help, you can feed workpieces with a large mass. Clamps or similar devices can be used to secure wooden parts;
movable carriage. A power unit is installed on it, which is connected to the drive shaft using a belt drive. To mount the disks, a special shaft must be made with the ability to change the position of the disks. The carriage moves along the frame guides using wheels.

Additionally, a lifting block should be provided to adjust the cutting depth. In this way, the maximum thickness of the workpiece can be significantly increased.

The control unit should be located on the side of the equipment. To increase the safety of operation of the woodworking machine, it is necessary to install a shield on the carriage. This way you can avoid chips getting into the electric motor.

To reduce the design, two power units can be mounted on a homemade edge trimming machine. This will make it possible not to make a belt drive system, which will greatly facilitate the manufacturing process.

To move the carriage along the guides, you can do long handle. Next to it there are usually buttons for activating/deactivating electric motors. This will make it possible to control the processing process from a safe distance.

In addition, the following additional components can be installed on edge trimming machines:

ruler;
cut depth indicator;
a protective mechanism that prevents motors from overheating.

Most often, improvised components are used to make this. Therefore, it is impossible to give clear recommendations for assembly. The technology directly depends on the characteristics of the constituent elements.

For example, you can see the design and operation of a homemade woodworking edge trimmer:

Edge covering of furniture parts is important stage its production. High-quality edges help protect the material, be it wood or plywood, from various negative impacts, and also give it a beautiful and finished look.

Any normal enterprise engaged in the manufacture of furniture is required to have equipment for edging. There is a special unit for this, which is called - edge banding machine.

If you have your own small production or are you just a lone craftsman making various products made of wood, then you don’t have to waste money and buy such a device. It is relatively easy to make with your own hands, spending a little time and effort. A homemade edge banding machine will perform its task no worse than a factory unit, but will cost the owner significantly less.

The operating principle of an edge banding machine and some device options

This device is widely used both in private workshops and in industrial scale. The following can be used as working material for decorating wooden products:

Paper.
Veneer.
Melamine.

The typical width of the cladding is approximately 2-5 centimeters, and the thickness can vary between 0.4-3 millimeters.

The essence of the device is that a facing material is passed through it, onto which glue is applied using special rollers. It is important to choose normal temperature, at which the adhesion of the glue will be of the highest quality.

Of course, if we are talking about making an edge banding machine with your own hands, then it is unlikely to have some of the advanced functions of a factory product, for example, heating the glue. Although it is quite easy to organize even this mechanism - it just takes a little more patience and time.

As for the types of the device in question, the following options are distinguished:

For working with curved edges. Typically, manual feeding of material is used here, since the master needs to adjust in time to the next bend on the part and rushing for an automatic belt will definitely not work.
For straight cutting. Such products, as a rule, have automatic feeding. They are most often used in the mass production of furniture or other things made of wood.

Typical design

In order for the manufacture of an edge trimming machine to be successful with your own hands, you need to become familiar with the typical design of such a unit.

The cladding supply system consists of a roll, a guillotine and special rollers. There is also a special magazine where the beginning of the tape is fed. It is pulled by rollers to the very part that needs to be processed, along the way being covered with a layer of suitable glue, heated to the desired temperature.

The mentioned rollers must have an adjustable speed; this is the only way to organize the optimal tape feed speed. A guillotine is needed to cut the material to the required length. Trimming occurs both automatically and manual mode, depending on the type of device and its tasks. The trim is adjusted so that approximately 25-30 millimeters of allowance remains.

There are some types facing materials, which immediately come with glue applied to them. In this case, it is enough to warm them up before use. If this is not the case, then the glue is contained separately in a special tray. Its temperature takes typical values of 150-200 degrees Celsius.

The pressure between the wooden part and the cladding is performed with a special support roller, although there may be several of them. When making a homemade edge banding machine, you can get by with just one such element, adding the necessary force with your physical strength.

Video: Homemade edging machine.

How to make the device yourself

Since the units in question have a fairly high price on the market, many craftsmen are willing to spend some time making them themselves. In principle, this option will also be quite sufficient for normal operation, but here you will have to more attention pay attention to safety precautions and use the device very carefully.

First, you need to acquire the necessary components. The standard package includes:

Automatic trim cutting unit.
The rotation control unit for the rotation of the rollers feeding the tape is good if it is equipped with a special indicator.
A place for heating the glue, some kind of thermostat.
Adhesive tape supply unit.
Guides that will help to properly fix the workpiece.

If you have stocked up with everything you need, you can start assembling. Of course, nothing prevents you from moving a little away from the accepted configuration and adding some of your own additional components that will help make the device more convenient and functional.

It is very difficult to give any specific advice on assembly, because you cannot predict what parts a person will be able to find and how he will manage them. The main thing that needs to be done is to look at a typical diagram of the unit and connect the specified components in in the right order. First, filling the material for cladding, then stretching it with applying glue, further delivery to wooden product and a sticker.

As a conclusion, it is worth noting that any person who has experience working with mechanisms, basic electronics and tools will be able to make an edge banding machine with their own hands. A little imagination - and you will get what you want.

At any woodworking enterprise, regardless of scale, sooner or later a problem arises with waste after wood processing. An edge trimming machine allows you to turn edged boards and log remains into glazing beads, platbands and other useful products that bring profit. At the same time, wood is used to the fullest extent possible, leaving a minimum of sawdust and useless waste. Let's consider the design of this unit, its application and operating features.

General information

The two-saw edge trimming machine “Altai-011” and its analogues allow you to process the rounded parts of slabs and shalevki. The result is edged boards or bars with a thickness of five millimeters, which are used in construction and design premises. Also, these products are used in various finishing works on the design of "change houses", car vans and other things.

The most popular are domestically produced machines of the TsOD-450 modification. In addition, you can make such a unit yourself for use in the household. The use of such devices makes it possible to minimize production waste and process wood as efficiently as possible.

Edge trimming machine TsOD-450: technical characteristics

The main parameters that the unit in question has:

maximum width/thickness/length of the processed material - 700/80/7000 millimeters;
dimensions of circular saws - 450/50 mm;
clearance working framework is ten centimeters;
the maximum possible distance between saws is 38 cm;
speed - three hundred rotations per minute;
operating power - 11 kW;
overall dimensions - 1.4/1.2/8.55 meters;
weight - six hundred kilograms.

The edge trimming machine can be equipped with electric or liquid power supply to the power unit. The working unit moves along the guide skis manually or by electric drive.

Device

The woodworking device in question may have one or two saws. In the first option, it is allowed to make no more than one cut per pass. Then the workpiece must be turned over.

The two-saw edge trimming machine TsOD-450 allows you to trim the workpiece on both sides in one pass. One operation makes it possible to cut the shalevka immediately into boards or bars of the desired size. Any machine is equipped with a bed, a platform for placing the workpiece, as well as a motor carriage that drives the circular saws. This design allows you to saw workpieces different lengths and width, which reduces waste.

Functionality

The operating principle of the edge trimming machine is common features, regardless of the number of working saws and the dimensions of the unit. A wooden blank is placed on the bed, which moves along one saw or several cutting elements. The carriage is moved by the operator manually or using an electric drive.

The single-saw version requires two passes to trim the edge of the workpiece on both sides. As a rule, such a device works in both directions.

The two-saw version is equipped with saws that rotate in different directions. This machine significantly increases labor productivity. Multi-saw models are designed for processing bars and boards various sizes. There are variants of units equipped with 12-14 saws.

The equipment requires adjustment of the distance between working parts. Later models have an automatic controller that allows you to set the distance between the saws with an error of no more than one millimeter. Also, modernized versions are equipped with a laser ruler and a speed controller.

Modifications

At domestic woodworking enterprises there are mainly machines Russian production. Among them, the DPC-450 series units are especially popular, namely:

"Taiga".
"Cedar".
"Altai".
"Aster".
"Vanguard"
"Stylet".

Foreign analogues have a higher price and are represented predominantly German manufacturers MS Maschinenbau and Wood-Mizer HR1000.

How to make an edge trimming machine with your own hands?

It is quite problematic to construct equipment with two or more saws yourself. Yes and in household use The single-saw option is quite sufficient. Let's see how you can make it yourself?

It is worth noting that significant financial resources will have to be spent on the construction of such a unit. However, if you have pipe scraps, sheets of metal and old motors in your storage, the cost of the work is significantly reduced.

In order to make a home edge trimming machine, you will need the following parts and components:

Metal corners, channels and pipes.
Electric motor.
Working shafts (you can use elements from agricultural machinery).
Circular saw.
Toolkit, which includes a drill, a welding unit and a grinder.
Fasteners (bolts, washers, nuts, screw ties).

Manufacturing process

First we make a strong and reliable frame. Metal channels are suitable for this stage. They must first be cleaned of rust and damage. If we take the dimensions of a machine with dimensions of 6.5/2.5/1.0 meters as an example, we will need to weld a frame of the appropriate dimensions and adapt stable legs to it.

Then we perform the following manipulations:

At the top of the frame, corners are welded along the longitudinal sides, which will serve to move the working carriage.
Then a groove is made for mounting the shafts.
Channels are welded together in the shape of the letter “P”, serving as the basis for the carriage itself.
A crossbar designed to move the saw is attached by welding.
The motor is being installed. Here you need to be especially careful. It should be taken into account that to ensure the correct operation of equipment with a disk with a diameter of 250 millimeters, an engine that provides a speed of at least five thousand rotations per minute is suitable.

Conclusion

The edge trimming machine TsOD-450 is a unit that is in demand in industrial woodworking production, as well as in private households. It allows you to make maximum use of the processed wood, is unpretentious in maintenance and has a lot of modifications. It will not be difficult to select a unit in accordance with the required functionality, performance and price.

The Taiga-K2m double-saw edger tank is designed for trimming and cutting unedged boards in order to obtain clean-edged lumber, as well as for trimming slab boards for the purpose of processing it in edge-type machines.

Edge trimming machine "Samurai 01"

Edge trimming machine "Samurai 01" is designed for sawing not edged boards on edged, block, lath.

The original lumber is laid on the frame, visually oriented according to linear laser pointers indicating the direction (the appropriate size is selected according to the ruler by bringing the saw units together or apart) and secured with an automatic end clamp. To increase productivity and ensure precise cutting geometry, the machine uses an electromechanical board clamp. It provides fast and reliable fixation boards from the ends.

Then, in order to avoid deformation of the board during sawing, the pressure rollers of the carriage are lowered, the rotation of the saws is turned on, and then the electric drive for the longitudinal movement of the carriage.

Upon completion of the movement of the carriage, the resulting product is removed from the machine and the carriage returns to its original position. The cutting width of the board is set from the operator console.

This machine uses laser pointers located on two support brackets, which in turn are positionally connected to circular saws. The use of laser pointers allows for optimal cutting of the board and greatly facilitates the operator’s work.

As standard, the machine is equipped with two 7.5 kW motors and two circular saws with a diameter of 350 mm. The saws are located on two independent shafts. The rotation of each shaft is ensured by one motor, which allows sawing boards up to 120 mm thick.

The machine is equipped with an automatic reverse feed device for the carriage.

The difference between the machine and other edge trimming machines is as follows:

The machine provides smooth cut by fixing the board. In other models used for the same purpose, a board is fed, which often does not ensure parallelism and straightness of the edges;
High productivity of the machine (10 cubic meters per shift) is achieved through the use of an electromechanical drive for clamping the workpiece from the ends and the ability to saw boards in forward and reverse directions;
A higher yield (up to 15% compared to analogues) is ensured by obtaining edged boards and sawing bars from the wane part in one pass;
Drives for setting the cutting width allow you to work both together and independently of each other;
For optimal cutting of the board width, linear laser pointers are used;
The machine is serviced by two workers: an operator and an assistant.

The machine consists of a fixed frame (9.0) m, on which the original lumber is fixed, and a movable carriage. The frame houses an electromechanical drive for securing the workpiece and an electromechanical drive for feeding the carriage. The carriage moves along guides. There are two movable saw units installed on the carriage - left and right. Each saw unit is controlled by a separate electromechanical drive. The saw unit consists of a motor and a shaft and pulleys, which are connected by a belt drive. Saws are installed on the shaft of the saw unit; the size between the saws is adjusted by faceplates.

Technical characteristics of the machine "samurai 01m"

Technical characteristics
Main drive power, - kW 2 x 7.5 2 x 11
Number of saw blades, - pcs. 2 4 2 4
Permissible width of sawn boards, mm 50..650
Permissible length of sawn board, - m 900..6000
Permissible thickness of sawn board, - mm 15..80 15..50 15..110 15..60
Circular saw size (diameter x thickness), - mm 350 x 3.0 x 50
Saw rotation speed, - rpm 4000 4000
Power of the electric drive for pressing the board, - kW 0.37
Drive power for setting the cutting width, - kW 2 x 0.25
Feed drive power, - kW 0.37
Overall dimensions (length x width x height) 9000 x 1100 x 1300
Productivity per shift (8 hours) cubic meters. edged boards 6-8 8-10
Laser pointers, pcs. 2

What are edge trimming machines used for?

Among the numerous equipment for the wood processing industry, edge trimmers have their rightful place. Since such a machine, together with, is the basis of any wood-processing workshop.

Edge trimming machines are used for longitudinal cutting and cutting of unedged boards. That is, to obtain high-quality, cleanly trimmed products. And yet, edge trimming machines can be used when cutting boards.

Now let's take a closer look at its properties. Typically, this machine, in comparison with, has 2 saws or more. The 1st saw is placed on the stationary spindle, and the 2nd and subsequent ones are present in a movable state. Adjusting the distance between 2 saws is done using a special tool. screw fixture and ruler, as well as laser pointer. It is possible to increase productivity, and therefore the economic component, by doubling the number of moving belts. So, it is possible to obtain 2 edged boards from one unedged one at once. Imagine how it is possible to increase the power and overall output of a woodworking shop if, in addition to the sawmill, you install an edge trimmer with several movable saw blades.

Here it is necessary to clarify that machines with one saw, as a rule, are used to produce parquet or furniture blanks, all kinds of slats using the method of specifically longitudinal sawing. If we move on to a single assembly, it includes a dusty assembly, a carriage moving along the machine, where the blank is located.
In this case, the feeding occurs manually along the blank. All characteristics necessary for precision work, including thickness and width of products, etc., are set remotely using a control panel. At the same time, the edge trimmer allows you to cut the board to width. This property allows you to restructure the scientific and technical process. An additional advantage is the likelihood of using it as a cutting device. This process is possible due to the presence of a folding base line. Those. It is possible to obtain blanks of varied widths from edged and semi-edged products. A this property- real frugality.
It should also be added that the actual average productivity of the machine, naturally taking into account the type of wood, is 10 cubic meters. per shift.

Advantages of edge trimming machines

Of course, any sawmill has an interest in increasing its profits, as well as in increasing production volumes. finished products. To achieve this result, the first step is to reduce the amount of production waste as much as possible. You can't do it alone here anymore. This task can be easily handled by an edge trimmer, which effectively processes pre-cut residues.

The main advantage of this machine is the ability to use boards of different lengths. With their help, all kinds of glazing beads, bars, lining, container boards, etc. are cut out. The best option would be to use edge trimming machines along with a band sawmill, because with their help you can easily make products from the remains of raw materials processed by sawmills.

Most often, woodworking industries use single-saw or double-saw edge trimming machines. Of course, two-saw devices are much more efficient and have more high level productivity, because they are equipped with two saws at once, one of which is in a stationary position, and with the help of the second you can make additional cuts. Plus, these types of machines are very easy to use. They allow sawing in two directions, which significantly speeds up work.

The main advantages of edge trimming machines:
High performance;
Simplicity and reliability of design;
High quality of the resulting lumber;
Possibility of quick adjustment of saws to a given size;
Possibility of adjusting the material feed speed;
High positioning speed;
High output ratio;
Excellent processing cleanliness;
Efficient pulling of the workpiece through the saw unit;
Relatively low cost;
Low operating costs.

Flaws

Of course, like any other equipment, edge trimming machines have their drawbacks:

Limited size of the processed workpiece;
Relatively low power;
Limited maximum distance between the outer saw blades;
Relatively high level of noise and vibration during operation;
It often becomes necessary to firmly fix such a device, for example, in concrete.

Thus, edgers are a very advantageous addition to a band sawmill. And if you are just going to open your own woodworking production, it is better to acquire both at once. In that case maximum efficiency work, and therefore profitability, is guaranteed.

Application of edge trimming machines.

Edgers are used for cutting unedged boards into edged lumber.

The SKR-1 single-saw edger is designed for precise longitudinal sawing of boards into furniture or parquet blanks, slats, as well as for producing edged boards from unedged ones.

Structurally, the edge trimming machine is made in the form of a carriage with a saw unit moving along fixed table with the workpiece lying on it. The carriage is fed manually along the workpiece.

When using the machine in combination with a horizontal band saw, sawing productivity increases significantly and the overall yield of edged boards increases.

The edge cutter, depending on the type and product, provides a productivity of up to 10 m3/shift and is intended for use in small and medium-sized woodworking enterprises.

The edge cutter is designed for mains operation AC~50Hz 380V, A saw with a diameter of 355 mm and 24 teeth with stellite surfacing is installed on the single-saw machine SKR-1. The machine is equipped with a 5.5 or 7.5 kW electric motor. The machine provides for installation of one or two circular saws on the spindle at a distance between them of up to 210 mm. By special order it is possible to replace the engine with a Honda internal combustion engine.

Double saw edger K2M

The Taiga K2M two-saw edge trimming machine is designed for trimming and cutting unedged boards in order to obtain clean-edged lumber, as well as for trimming slab boards for the purpose of processing it in slab-edged machines.

Features of double saw edgers

Edgers are mainly used with, thereby increasing the productivity of the latter. We recommend installing edging in a bundle of at least a pair band sawmills. Unlike single-saw machines, a saw trolley with two cutting tools - disks, which are mounted on the shafts of two electric motors - runs along the bed. Unlike the Taiga K2 machine, the K2M has a power of each motor of 7.5 kW (versus 5.5 kW), that is, the total power is 15 kW. The required distance between the saws is adjusted by a special screw mechanism and controlled using a ruler. Thus, in just one pass of the saw trolley you get an edged board, this is the main advantage of two-saw edge trimming machines. The saw trolley is moved along the bed by the operator. Cutting tool are saws, both simple and with pobeditovy tips, domestic or imported. Performance depends on general conditions, as well as on the operator’s skills, but twice as high as that of single-saw machines. The design of the machine allows cutting material in both directions.
https://

Delivery set of edge trimming machine Taiga K2M (K2)

1. Saw trolley - 1 pc.

Saw drive electric motor, with saw attachment attachment - 2 pcs.
Power control panel - 1 pc.
Electrical cable (set) - 1 pc.
String with fastenings for electric cable- 1 pc.
Protective casing - 2 pcs.
Mechanism for moving the saw with a ruler - 1 pc.

2. Composite rail tracks - 3 pcs.

3. Legs for fastening the frame - 10 pcs.

Frame mounting legs - 10 pcs.

4. Box of parts and tools for assembly and maintenance of the machine - 1 pc.

Torque wrench for saw tension - 1 pc.
Saw drive motor belts - 2 pcs.
Support drive roller for saw cart - 2 pcs.
Support driven roller of the saw cart - 1 pc.
Leading pressure roller of the saw cart - 2 pcs.
Driven pressure roller of the saw cart - 1 pc.
Pressure roller - 2 pcs.
Adjustable pressure roller clamp - 4 pcs.
End clamp - 2 pcs.
End clamp movement mechanism - 2 pcs.
Saw fastening washer - 2 pcs.
Saw fastening nut - 2 pcs.
Handle for moving the saw cart - 1 pc.
Set of bolts/nuts/washers for fastening machine components - 1 pc.
String fastening strips - 2 pcs.
Handle for driving the saw - 1 pc.
Operating manual/passport/warranty card - 1 pc.

5. Box with adjustable supports for installing rail tracks - 1 pc.

Adjustable supports for installing rail tracks - 20 pcs.

Two-saw edge trimming machine SK-50

Two-saw edge trimming machine SK-50 RUB 80,000/piece

The purpose of the edge trimming machine is to cut unedged boards and obtain finished clean-edged material. The workpiece is cut in the longitudinal direction. With the help of this machine, you can produce a bar, a lath, a carriage blank, a pallet blank, etc. from a slab.

When choosing edge trimming equipment, you must consider the following: technical specifications: maximum size workpiece being processed; number of saws that can be installed; maximum distance between the outer saw blades; installed capacity; raw material supply speed. On two-saw edge trimming machines, one saw is stationary due to installation on a special spindle. The second saw is movable, which allows you to adjust the distance between the saws and obtain the required width of the finished product.

As a result of using the SK-050 machine, you receive ready-made clean-edged material - a lath, a block, a pallet or a car blank, obtained as a result of cutting an unedged board (slab). The operating principle of a two-saw edge trimming machine is based on the use of two saws - a fixed one (installed on a special spindle) and a movable one, due to which the distance between the saws is adjusted. This way you can get products of any required width. The two-saw edger "SK-050" is easy to use, economical, highly efficient, and has a high feed rate of raw materials. Power indicator – 11 kW.

Specifications

*Cut width, mm up to 600 *Cut height, mm 10 - 80 *Cut length, mm 800 - 6500 *Circular saw diameter (2 pcs) 500* * Installed power, kW 15* *Saw frame clearance, mm 100* * Longest distance between saws 400
*Shortest distance between saw blades, mm 80 *Smallest size of sawn workpiece (using dimensional stops), mm 20 *Rotation speed of saw blades rpm. 3000 *Length, mm width, mm height, mm 8500 1450 1320 *Machine weight, kg 540
https://

The two-saw edge trimming machine Taiga-K2m is designed for trimming and cutting
unedged boards for the purpose of obtaining clean-edged lumber, as well as for trimming slab boards for the purpose of its processing in edge-type machines.
Machine stationary type. Simple and reliable to use.

The lumber is positioned motionless on the machine; a saw cart with discs moves.

Saw blades are mounted on electric motor shafts. The required distance between the saws is adjusted by a special screw mechanism and controlled using a ruler.

The saw trolley is moved along the bed by the operator.
The saw blades are driven by 2 electric motors with a power of 7.5 kW, the total power consumption is 15 kW.

The cutting tool is a saw, both simple and with pobedite tips.
domestic or imported production. Diameters: landing - 50 mm, saw blade - 500 mm.
Performance depends on general conditions as well as operator skill. Design
The machine allows cutting material in two directions.

The price of this edge trimmer is approximately 80,000 rubles.