How to find out the version of the asus motherboard. How to find out your motherboard model

After some time, the computer needs an upgrade. Some users prefer to upgrade by purchasing a new computer, others replace old components with new ones.

Before purchasing new PC components (video card, processor, RAM and others), you need to know the characteristics and model motherboard. This is necessary to avoid component incompatibility.

Physical examination

To physically inspect the installed motherboard, it is necessary to disassemble it. system unit.

In order to disassemble the system unit, you must:

This method is suitable for owners of desktop computers.

Important! Motherboard manufacturers "ASUS" write the model name near the "PCI-E" connector, the manufacturer "GIGABYTE" places information about the board near the RAM slot, the manufacturer "MSI" as well as "ASUS" most often place information near the "PCI-E" connector "

Windows Standard Tools

If the user, due to inexperience, cannot disassemble the system unit and see which motherboard is installed, then you can use standard means operating system Windows, such as: BIOS and command line.

You can also use the standard utilities of the operating system.

To use the System Information utility, you must complete the following steps:

Important! The standard “System Information” utility may not display information about the motherboard.

You can also use the standard Windows utility “DirectX Diagnostic Tools” to establish the model.

To use the DirectX Diagnostic Tools utility, you must complete the following steps:

Important! Data may not be displayed. In this case, the “Computer Model” item will contain the “System Product Name” information.

Another standard method for determining a model is PostScreen checking. Post check occurs when the computer starts.

Important! Modern computers pass the Post check almost instantly, so such a screen may not be displayed when the PC starts.

Video: information about bios, motherboard and processor

Via Bios

You can find out the motherboard model through the BIOS.

In order to find out the motherboard model through the BIOS you need to:

Method two:

Command line

One of the most simple ways find out what motherboard is on your computer - this is through command line. The user is not required to install additional software, just call the command line window.

To determine the motherboard model via the command line you need to:

First team "wmic baseboard get Manufacturer". Using this command you can determine the manufacturer of the motherboard;
Second team "wmic baseboard get product". Using the command, you can directly determine the motherboard model;

then all that remains is to enter the desired command.

The second method looks like this:

The third way to define using the command line looks like this:

Let's find out what motherboard I have on my computer in Everest

You can find out the motherboard model using specialized software. Everest (today the program is called AIDA64) allows you to perform an in-depth analysis of a personal computer.

With the help of Everest, you can find out about the technical characteristics of your PC, test the processor (CPU), video card (GPU), and RAM. Everest allows you not only to find out the characteristics of your computer, but also to update the system drivers, providing download links to the official pages of the manufacturers.

Important! The program is distributed free of charge and has a trial period of 30 days.
The trial version of the program has significant functional limitations.

To find out the model and characteristics of the motherboard in the program you need to:

You can also determine the Everest board model:

The everest program is the most effective in determining the model and characteristics of the motherboard.

This article discussed ways to determine the motherboard model. You only need to choose the most convenient method.

The most complex, expensive and irreplaceable part of a computer or laptop is the motherboard. The video card is connected to it and hard drive, the processor “connects” with it, RAM etc. Therefore, it is necessary to closely monitor the updates of motherboard drivers. After all, the performance of a PC or laptop depends 90% on this.

At the same time, there are situations when you need to find out which model of motherboard is installed in the device. And not only to download the correct drivers, but also to replace it. You also often have to find out what kind of motherboard is in a laptop or PC when purchasing new components. Because they may be incompatible with it. Therefore, each user should be able to determine which motherboard is installed on the computer.

We will not talk about the fact that you can find out which motherboard is on your computer from the accompanying documentation or from a special marking sticker next to the laptop keyboard, or simply by looking inside the system unit. This is understandable.

Our goal is to teach you how to identify your motherboard programmatically. To do this, we recommend that you use Windows OS diagnostic utilities. All you need:

Press the Win+R key combination on your keyboard. This will launch the “Run” window.
Next, in a special line you need to enter the command “msinfo32”.
The System Information panel opens. There is no need to select anything on the left side. We look at the right side of the window and find the items “Manufacturer...” and “Main board model”.

Agree, everything is quite simple. However, there is one caveat. Not always this method helps to find out the manufacturer of the motherboard and its name. Sometimes “Not available” is written next to the lines we are interested in. What to do then? It is best to use the following method:

Again, use the command line (Win + R).
In the “Run” line, enter dxdiag and click OK.
Most likely, a warning window will pop up in which the system will ask if you really want to find out information about installed drivers, components, etc. Naturally, click yes.
The DirectX Diagnostic Tool panel opens. On the very first tab “System” you need to find the fields “Computer Manufacturer” and “Computer Model”. This will contain all the necessary information about the motherboard.

That's not all. There is another way to find out what motherboard your computer is equipped with. You also need to open the command line (Win+R) and enter “cmd” there. Then a window will appear on the display. In it we enter the following commands one by one:

“wmic baseboard get Manufacturer” - to clarify the company that produced the motherboard;
“wmic baseboard get product” – to determine its model.

An alternative option is to simply enter “systeminfo” in the command line and press the “Enter” key. The user will see a window with detailed technical information about this device. Including, here you can find information about what motherboard is installed on this PC or laptop.

Using additional software

Regardless of the OS, be it Windows 7, 8 or the most latest version Windows 10, you can find out what motherboard is on your computer or laptop using special free or paid utilities. The only caveat is that such programs must be downloaded. That is, you will need Internet access.

Among the highest quality and proven utilities is CPU-Z. It can be downloaded for free from many Internet resources. At the same time this program does not require installation. Just run the file with the exe extension.

Once the CPU-Z utility has started working, you need to switch to the “Mainboard” tab. Next, in the “Manufactured” and “Model” paragraphs (“Manufacturer” and “Model”) you will find all the necessary information about the motherboard.

A utility called AIDA64 also copes well with its tasks of identifying the motherboard. By launching it, you will see detailed parameters and characteristics of all equipment included with this PC or laptop. If you do not know how to use this program, then follow the following procedure:

Download the utility from https://www.aida64.com
Install it (it will take less than a minute).
Then open the program. You will immediately be greeted by a window that will warn you that AIDA64 is not free utility. But there is no need to be upset. After all, you have 30 days to try out the trial version. So just click OK.
Select the “Motherboard” section on the left. Now on the right you can see the model and name of the motherboard.

If the AIDA64 utility still seems complicated to you, then download another similar program. It's called Speccy and has a clearer and simpler interface. Moreover, its capabilities are completely identical to the AIDA64 utility. With Speccy you can learn a lot useful information about the motherboard - number of slots, serial number, chipset model, etc.

Via BIOS

If you don’t like any of the above methods, you can try to find out the motherboard model through the BIOS. To do this you need:

When loading/turning on a PC or laptop, press the “Del/Delete” or “F2” key repeatedly on the keyboard (depending on what BIOS version);
As soon as the main window opens, just look up - the motherboard will be indicated there;
Otherwise, use the buttons on the keyboard (down, up, right and left arrows) to select the “Advanced BIOS Features” section. Again, pay attention to top part window, because the name of the motherboard should be displayed there.

If the computer or laptop does not work, then it will not be possible to programmatically determine the motherboard. You will have to do this manually - turn off the device, remove the back or side cover, and then carefully examine the motherboard. Basically, manufacturers (asus, lenovo, packard bell, etc.) indicate its model near the PCI-E connector or near the processor slot.
Is it possible to find out what kind of motherboard is installed from the driver disk that came with the laptop or PC? As a rule, you can't. The fact is that the same disks go directly to the line of motherboards, and on them you can only see the name of the series, but not the model itself.
On some computers, when the system boots, information about the motherboard appears on the screen for a couple of seconds (or even less). Her model is even displayed. True, not all users can read so quickly. In addition, in order to see the necessary information, sometimes you have to restart the PC several times, and this can damage the device.

How can I find out what motherboard I have? This is the question I received in the mail yesterday. It’s not for nothing that I started writing about how certain characteristics of a computer are recognized. Today I continue to publish information about this, or more precisely, the topic of today’s conversation is how to find out what motherboard is on your computer. I did not make one article in which I could tell how all the characteristics of a computer are recognized, since the letters that I receive usually sound like this: “Alexander, how can I quickly find out what motherboard I have on my computer?” If I give a link to an article where I talk about all the devices, then some people ask for a little help because they are confused. So the conclusion suggested itself - to write small articles about each device, so that each reader could do all the steps independently without any help.

Before you ask a question on the Internet, you can ask yourself. After all, when purchasing any device, you should be given at least some kind of documentation, or, as it happens now, a small piece of paper on which they manage to write not only the model of the device, technical specifications, but also tell how to use them - in pictures or in a short paragraph. If this document is not at hand, then this article will help in this matter.

Physical inspection of the motherboard

If your computer is disassembled or you cannot turn it on, you can open the system unit, then carefully inspect it from the inside.

In the image below you can see the ASUS motherboard. After you have found out the model of the motherboard, search Google or Yandex for detailed information about it (if required).

If you do not want to disassemble the system unit or you are afraid to do it, then you will need programs that can read and display this information.

Standard Windows tools and other programs

Next, I will tell you how to find out the information you need about your computer using programs, but now I suggest you try a standard utility from Microsoft, which sometimes does not show some characteristics. So, go to “Start” - “ ” or use the hot keys “Win” + “R”. Then type msinfo32 and press Enter.

A window will open in which you can view the characteristics of your computer.

As I said above, find out the motherboard model using standard tools Windows systems sometimes it is impossible, so I will talk about several intuitive programs that have a Free license. Finding and downloading them will not be difficult for you.

The first program I’ll tell you about is AIDA64. Displays detailed characteristics of all equipment connected to the computer, including the main board that interests us. We launch the program, select “Motherboard” in the left list, information will appear on the right side of the window, and the model will be written at the top.

This is what it looks like on my laptop:

The second utility is called Speccy. The meaning is the same, you need to perform the same actions (click on the “Motherboard” inscription on the left side of the screen), it will display the same data. There is no difference between these two solutions, use the programs that you like. AIDA64 shows more detailed characteristics, and the Speccy program will be convenient for a novice user.

Well, of course, I couldn’t help but talk about how to find out which motherboard is on a laptop or computer without a third-party software, but also without standard Windows tools. “How is this?” - you ask. And I will answer you: “During loading!” Yes. When you turn on the computer, information about the motherboard and, of course, its model appear on the screen for 2-3 seconds as it starts to boot. Disadvantages of the method: you have to read very quickly, in order to see the information you have to restart the computer several times and also this information may not be there. That's all for today. Thank you for your attention, read my blog, bye everyone!

Video about how to choose a motherboard:

Hi all! Once upon a time, I wrote about what it is. A lot of time has passed since the purchase, so you reinstalled Windows, and now we need to download drivers for the chipset, sound and other equipment soldered to the motherboard. (As a rule, all disks and documents tend to get lost over time)

And then the question arises in many people’s minds: how can I find out what model my motherboard is? Or are you ready to buy a new video card or processor? Again, until you find out the motherboard model, it will be difficult to determine anything. If in the case of drivers you can find them by hardware ID, then in the case of an upgrade this will not work.

Visual identification of the motherboard model and manufacturer

How to find out the motherboard model visually? Very simple, for this we need a screwdriver and good lighting. We unscrew the bolts from the side cover of the system unit and remove it away so that it does not interfere.

Now the most important thing is to carefully examine the motherboard. Unfortunately, some manufacturers manage to write a name where you wouldn’t find it during the day. Typically the marking is placed above the PCI-E slot or next to the processor. For example, in the photo below, the motherboard is labeled GA-790FXTA-UD5. It is this name that we will enter into Google or Yandex to determine the characteristics of the equipment or download drivers

This method is old-fashioned and has never failed, but I would not recommend it to you. Firstly, you will have to open the system unit (which is not at all good if it is sealed and is under warranty), and finding the name of the motherboard is not always easy (especially if you opened it for the first time, because there will be a bunch of inscriptions and you simply will not understand: what this is where the board model is), and secondly, there are much simpler ways 😉

You can find out the motherboard model programmatically

The software does not stand still. The CPU-Z program is also being developed. An excellent utility is designed to obtain information about the central processor, but it will also help us suggest the motherboard model. You can download it by visiting the official website of the program.

Please kindly report broken links:

Go to download site CPU-Z programs [Size: very small]

So, open the program and go to the “Mainboard” tab. Here we can see the manufacturer in the Manufacturer line and the model itself in the Model line.

There should be no questions here, since the method is as simple as three pennies. However, there are other programs to understand what is inside our computer?

Perfect for these purposes AIDA64(in the old days it bore the proud name Everest). The purpose of AIDA is to show us complete information about the equipment installed in our computer. Unfortunately, the program is paid, but has a 30-day trial period (I think this time will be enough to decide on the motherboard model)

In the left window, expand “System board” and select “System board” (I understand that I wrote something crazy, but it is true - look at the screenshot above). In the right window in the line “Motherboard” we see the exact name of our motherboard.

How to determine the motherboard model using Windows

In my opinion, the easiest way to find out what motherboard is installed in your computer is to ask it on the command line. You don’t need to install anything, just open the “Run” menu (if you can’t find this item, then read about it). In the window that appears, type CMD. The command line will open, which means that all that remains is to enter the commands:

- to determine the motherboard manufacturer - wmic baseboard get Manufacturer
- to determine the motherboard model - wmic baseboard get product

The picture below clearly shows what it looks like.

In the article, it makes no sense to consider all the ways to find out the model of the motherboard, and there is no need for this, because the steps given here allow us to answer our question fully. All the best 😉

There are situations when you urgently need to find out the model of the motherboard of a computer or laptop. Such information may be needed after reinstalling the Windows operating system, especially when it has integrated network and sound card, which the system does not detect due to the absence of the motherboard driver itself. We offer some tips on how to find out your motherboard model.

The first thing you can do is look at the box for the motherboard (if it was purchased separately) or in the instructions for your computer or laptop. But what to do if the instructions are not at hand, perhaps you lost it or threw it away. Luckily, there are other methods to find out motherboard data that don't involve searching through boxes and cabinet manuals.

The easiest option is to look at the name on the motherboard itself. To do this, remove the cover from the system unit and look for its name on the board. There should be information about the manufacturer and model, for example, GICABYTE, MSI, ASUS.

Information about the model is recorded not only on the board itself - it is also recorded in the BIOS and can be easily identified using the appropriate command or a special utility.

Board recognition via command line

Using the built-in tools of Windows 7/8/10, you can determine which model is installed on your computer. To do this, follow the instructions:

Open a command prompt console. This is not difficult to do - click on the Start button, in the menu that opens, select Search or Run and enter the command “cmd”.

In the console on a black screen, enter Systeminfo and confirm by pressing Enter. After a while, a list will appear on the screen, which will display all the data about the installed equipment on your laptop or desktop computer and system information.

Find the lines “System Manufacturer” and “System Model” in the list, which contain the data you are looking for about the manufacturer and model of the installed motherboard.

There are several more commands with which you can find out information about your device.

In order to find out the specific name, enter “wmic baseboard get product” in the command line. Only the “System Model” line will be displayed on the screen. To identify the device manufacturer, type “wmic baseboard get Manufacturer”.

In our opinion, these are the most simple methods determine the motherboard via the command line “cmd”, which will be sufficient for most. But to find out more detailed information about the device, we offer several more ways.

Identifying a device through System Information

Similar data can be found in a more user-friendly window using the standard Windows applications"System Information". To do this:

Press combination Windows keys+ R to open the Run window.

Enter the command msinfo32 and confirm by pressing Enter.

The System Information section will open, providing information about your computer. We find the lines that display information about the motherboard, respectively, “Manufacturer” and “Model”.

How to recognize a device via CPU-Z

If the information provided by the embedded using Windows is incomplete and does not suit you, you can use the CPU-Z utility. This is a fairly popular program for determining computer hardware. So, how to find out the motherboard model using this program.

Launch it and then go to the Mainboard tab. In the Manufacturer and Model fields you can find out detailed information about the installed device. In the case of laptops, Windows system tools do not always display complete information about the motherboard, while the CPU-Z utility is able to determine its more precise name and provide more advanced information.