Commands on the minecraft server. Console Commands
The admin, otherwise known as the server operator in Minecraft, has a number of commands that can be used to manage the server. These are basic commands; you do not need to install any plugins/additions to use them. Commands must be entered into the chat. Before entering the command, you must write the “/” character (slash). Required command parameters are circled<такими скобками>, additional parameters [such].
- /ban<никнейм>— Bans a player on the server by removing him from white sheet and blacklisting. Banned players cannot play on the server.
- /pardon <никнейм>— The opposite team to ban. Unbans a player by removing his name from the blacklist.
- /ban-ip
— Bans an IP address by blacklisting it. Players with an IP address on the blacklist cannot play on the server. - /pardon-ip <никнейм>— The opposite of an IP ban. Removes an IP from the blacklist.
- /banlist— Displays a list of banned players. If the optional ips parameter is used, displays a list of banned IP addresses.
- /deop<никнейм>— Deprives the player of administrator (operator) rights.
- /op<никнейм>- Opposite deop command. Gives the player administrator (operator) rights.
- /gamemode <0/1/2 [никнейм]>— Changes the game mode for players. If the additional nickname parameter is specified, the team will change the game mode for this player. If the parameter is not specified, the mode of the person who entered the command will be changed. In order for the command to work, the player whose mode is being changed must be in the game.
- /defaultgamemode <2/1/0>- Changes the game mode of the world.
- /give<никнейм> <номер предмета [количество]>— Gives the player an item with the specified ID in the specified quantity.
- /help— Output of all available console commands.
- /kick <никнейм>— Kicks the selected player from the server.
- /list— Displays a list of players on the server.
- /me— A command that allows you to send messages from a third party.
- /save-all— A command that backups (saves) the current state of the server to the hard drive.
- /save-off— Disables the server's ability to save server state to the hard drive.
- /save-on— As opposed to the save-off command, allows the server to save the server state to the hard drive.
- /say <сообщение>- “Says the server.” The message entered using this command is displayed in pink.
- /stop— Disables the server. Before shutting down, the server is automatically saved.
- /time
<число>— Sets the time, or adds time to the current one. - /toggledownfall- Changes the weather.
- /tp <никнейм1> <никнейм2>— Teleports the player with Nickname1 to the player with Nickname2.
- /tp <никнейм>
— Teleports the player to the specified coordinates. - /whitelist
<никнейм>— Adds or removes a player from the whitelist. - /whitelist list— Displays a list of players on the whitelist.
- /whitelist
— Activates/deactivates the whitelist. - /whitelist reload— Reloads the white list.
- /xp<количество> <никнейм>— Gives the player with the specified nickname the specified number of xp points.
- /publish— Allows access to the server via LAN.
- /debug— Starts a new debug mode session.
Here are all the admin commands in Minecraft.
Here is a list of all available commands to players on our servers. All parameters (arguments) of the command are indicated in parentheses (there is no need to specify parentheses when entering the command). So: - a required parameter is specified, and [parameter]- optional.
Chat message tags
[A]– the person who sent the message is the server administrator.[M]– the person who sent the message is a server moderator.
Basic
| Team | Description |
|---|---|
| /spawn | Return to spawn |
| /kit [kit_name] | Get a set of items. If the name of the set is not specified, a list of sets available to you will be displayed. |
| Send a message by mail | |
| /rules | View brief server rules. Full Rules of Conduct on game servers are posted on the website. |
| /call
/tpa |
Send a request to teleport to another player. Teleportation will occur as soon as the player accepts your request. |
| /tpaccept [nickname] | Accept a request to teleport another player to you. If a nickname is not specified, the last received request will be accepted. |
| /ignore [nickname] | Add/remove a player from the ignored list. This option allows you to disable receiving DMs, displaying messages in the general chat, and teleportation requests from a specific player. To view the list of ignored players, enter this command without specifying a nickname. |
| /tell /pm /msg |
Send a private message to the player. |
| /time | Find out the current game time on the server. If you don't have access to this command, use RMB with vanilla gold clock |
| /me | Write a message from the 3rd person (status). |
| /workbench | Portable workbench (opens the interface of a regular workbench). |
| /back | Teleports you to the place where you last time teleported. |
| /hat | Place any block (which you hold in your hand) on your head. To withdraw, enter: /hat 0 |
| /scvroff | Disables the function of saving inventory in case of death (things will drop out as usual). |
| /scvron | Re-enables the function of saving inventory in case of death. |
House
Allocation of territory
Below are the commands with which you can select a territory in order to later privatize it.| Team | Description |
|---|---|
| //wand | Get a wooden ax and a tag to mark out the area and check it. On our servers, a special ax and tag have been added to check privateness so that players do not use them as free fuel. |
| //pos1 //pos2 |
Select the block on which you are standing (selection without an axe). |
| //hpos1 //hpos2 |
Select the block you are looking at (selection without an axe). |
| //expand [direction] | Expand selection by N(number) of blocks in the specified direction. (if the parameter is not specified, the selection will expand in the direction where you are looking).
|
| //expand vert | Expands the selection vertically as much as possible possible meaning(from bedrock to sky). It is recommended to use it so that your private cannot be poured on top or filled with liquids. |
| //contract [direction] | Narrow selection to N blocks in the specified direction (if the parameter is not specified, the selection will be narrowed in the direction where you are looking). |
| //outset [-h/-v] | Expand the selection (increase the volume) in all directions by N blocks.
|
| //inset [-h/-v] | Narrow the selection in all directions. The rest is similar to the above command //outset |
| //shift [direction] | Move selection to N blocks in the specified direction (if the parameter is not specified, the direction in which you are looking is selected). |
| //size | View information about the allocation (number of blocks, etc.). |
| //desel //sel |
Deselect (remove red grid). |
Private territory
Instead of a command /region You can use a shortened analogue: /rg| Team | Description |
|---|---|
| /region claim | Create a region (private the territory). From now on, your territory is protected. |
| /region info [-s] [region_name] | View information about the region (participants, flags, etc.). If you do not specify the region name, information about the region in which you are currently located will be displayed. When specifying a flag -s The region will be highlighted (the private grid will be shown). |
| /region list [page] /region list -p [page] |
Will display a list of your privates. The “+” sign indicates private spaces where you are the owner, and the “-” sign, respectively, indicates a participant. |
| /region flag [value] | Set a flag (option) to a region. Leave the parameter [meaning] to reset the flag. Access: Owner |
| /region addmember | Add players as participants in private (player nicknames are listed separated by a space). This will give them the ability to only build and use machinery in private. Attention! You add participants at your own peril and risk. No one will return stolen items or restore destroyed buildings to you. Access: Owner |
| /region removemember [-a] | Remove participants from private (nicknames are listed separated by a space). Flag -a deletes ALL participants, in this case there is no need to list nicknames. Access: Owner |
| /region addowner | Adds players as owners in private They get full access (like you) to private. Access: Owner |
| /region removeowner [-a] | Delete private owners (nicknames are listed separated by a space). Flag -a removes ALL owners; in this case, player nicknames do not need to be listed. Access: Owner |
| /region setpriority | Set region priority. Priority- any integer. By default, all regions have priority 0. Priorities are needed to resolve conflicts where regions intersect. Using them, you can determine which region will be dominant at the intersection. Access: Owner |
| /region select | Select the region (a selection grid will appear). This can be useful for viewing privacy boundaries and changing them. To remove the selection, use the command: //desel
Access: Owner Member |
| /region remove | Delete region (remove private). Access: Owner |
Warps
| Team | Description |
|---|---|
| /warp | Teleport to the warp. |
| /warp list [-p] [-c creator] [-w world] [page] | View the list of warps available to you. Public ones are marked with a “+” sign.
|
| /warp create /warp set |
Create public warp. All players will be able to teleport to this warp. |
| /warp pcreate | Create private warp. This warp will be available only to you and players invited to it. |
| /warp update | Update warp position (will be set to the place where you are currently standing, the direction of your view is also taken into account). |
| /warp welcome | Set a greeting message. Enter this command, then write a message in the chat that you want to install. |
| /warp info | View information about the warp (creator, coordinates, visits, etc.). |
| /warp invite | Invite a player to private warp. The invited player will receive a notification that you invited him. |
| /warp uninvite | Cancel invitation (remove access) to private warp. |
| /warp public /warp private |
Make the warp public or private. |
| /warp delete /warp remove |
Remove warp. |
Bonuses
ATTENTION! The administration can make changes to the list of available commands. It is recommended that you review this section periodically.
Last edit date: 01/21/2017
To private a territory, the WorldEdit plugin must be installed on the server. Without it, most likely nothing will work out.
We select the territory
There are several ways to select an area. The most common is using an ax. At the same time, it is not necessary to create it; you can simply enter a command in the chat;
Using the left mouse button, first mark the lowest point of your territory. If the coordinates appear, then you did everything correctly. Next, you need to note the most high point. Move the character to the desired place and rise to the required height and right click mouse mark the second point.
You don’t have to select the highest or lowest points, but mark those that are at the same height. After that, enter two commands in the chat:
The first team marks the height of 20 cubes down, the second, respectively, the height of 20 cubes up. The number of cubes can be changed as desired. This will eliminate the need to build tall pillars and dig deep holes.
The question may arise as to why mark an area that goes deep or is located at the top. After all, there are no buildings on it. This is done to prevent evil players from harming you, for example, by flooding the entire area with lava or by digging under and getting to your chests.
The next method is similar to the previous one. Only instead of an ax we will use commands. You also need to stand at the lowest point of your territory and enter a command in the chat;
You can also use the commands;
They mark the points that the character is looking at. That is, where the cross in the middle of the screen is directed.
The most important thing is not to forget that the territory is private at an angle. If you mark a straight line with dots, then only what is between these two dots will be private.
Let's privatize the territory
Once the territory has been allocated, there is very little left for it to become completely yours. In chat you need to enter the command
Name – this is the name of the site, you can choose any one.
And that’s it, the territory is secured. Each territory has its own owner and members who have access to it and their actions are limited. If you created a region, then you automatically become its owner and can add new members to it.
For example, you have created a region and want to build something in it. And your friends want to help with this. In order for them to perform actions, you need to enter a command in the chat;
/region addowner “territory name” “friend1 name” “friend2 name”
Only all names and titles are written without quotation marks. There is also no need to separate them with commas or periods, just a space.
After construction is over and you want to live in peace and quiet, you can prohibit other participants from performing any actions as a team;
/region removeowner “territory name” “friend1 name” “friend2 name”
We also write all names without quotes.
Protection of private territory
You can use flags to protect your region. Flags in Minecraft are the imposition of any restrictions on the territory. They can only be installed by the region owner.
Flags are set by command;
/region flag “region name” “flag name” “value”
Everything is written without quotes, of course. There can be three values: deny-it is forbidden, allow-Can, none-not installed.
Flags that can be used to protect your territory:
- Pvp– attack by other players, if you set a ban, then no one will be able to attack you
- Sleep– whether players can sleep on the territory.
- Creeper-explosion- creeper explosion, if you put a ban on it, then creepers will not be able to explode on your territory and will not be able to cause any damage to you or your buildings.
- Lighter– use of a lighter; if prohibited, no one (including you) will be able to use a flint and light a fire. On the one hand, no one will cause damage, on the other, you will not be able to get into the lower worlds.
- Lava-flow– damage from lava. With the ban, no one will be able to flood your entire territory with streams of hot lava, which causes enormous damage.
- Potion-splash- damage from potions. When banned, you do not take damage from potions.
- Water-flow– water damage. With the ban, no one will be able to cause a flood and destroy buildings.
- Ghast-fireball- fireball damage. If you put a ban, then no one will be able to use the fireball throughout the entire territory.
- Use- Use of mechanisms, doors. When banned, no one will be able to open doors or use mechanisms. Griffins' favorite pastime is using a piston and using it to move the house beyond the sealed area. And it’s already robbed.
- Chest-access- Using chests. When banned, no one will be able to use your chests.
The ban command, for example, the use of chests in the House region will look like this;
/region flag House chest-access deny
If you put a ban on all flags, then your region will be ready for any surprise and will become invulnerable.
How to lock up a house
The privacy of a home is no different from the privacy of a territory. Strictly speaking, the player simply limits the territory on which the house is located. So the procedure is the same.
When selecting a territory, you need to mark points with a margin of distance. There must be at least five cubes from the border to the wall or roof. This way you can create maximum protection. When marking territory, make sure that it does not capture someone else’s region, otherwise you will not succeed.
You can go another way. Securing things separately, every detail of the house and its furnishings, but this is very tedious, time-consuming and tedious. If you have a lot of time, you can try it.
Creating a child region
On each private territory you can create another private region. For example, if you are not playing alone and you have a house that friends have access to. And you only want to have your own personal room in it.
First as a team;
select the zone that will be a region within a region, then enter the command;
/rg claim “new region name”
without quotes. After this, you need to make this territory a child territory, to do this, write in the chat;
/region “main region name” “child region name”
All names are without quotes.
This will be useful for those who have a large territory and there are many players in it.
How to check the territory for private
After all the actions have been completed and the commands have been entered, you will need to check whether it was possible to privatize the territory. You need to pick up a stick (if the old version, then a web) and poke it at any block. A message about the name of the territory will appear or it will not appear.
This method works with the territory of other players, and will also be useful if for some reason you have forgotten the name of your region.
Other useful private commands
If you get tired of the private area, you can remove it. Of course, you don’t have to do this, but then a piece of the world will be inaccessible to other players, and if they stop deleting the private message, then the territory may become inaccessible. Therefore, it is better to act as an honest crafter. The private is removed from the territory by the command;
/region delete “region name”
Remember that when you delete your region, you lose all buildings and acquired property.
If you want to enlarge or move a region, then it is not at all necessary to delete it and do it anew. There are special commands for these actions. First you need to select a new area or your territory and enter;
/region redefine "region name"
/region move “region name”
/region update "region name"
The private area will be changed, but the flags will remain in place.
You can also add a co-owner, but this is highly not recommended. He will have the same rights as you. A co-owner is added by the team;
/rg addowner "region name" "player name"
You can delete it by registering it in the chat;
/rg removeowner "region name" "player name"
By the way, having become a co-owner, he will also be able to use this command and remove you from your own region. So choose your partner carefully.
If you want to add friends, but you don’t quite trust them, then the team;
installs protection on chests, doors, stoves, hatches, elevators, and so on.
If you need to give access to them, then write the player’s nickname after the command. You can also set a password and not have to enter it every time new team with the player's name. It is installed if you write in the chat;
/cpassword "password"
Now you can simply provide your password to the right people. If you forget it, then all password-protected chests and doors can be opened using the command;
A removes protection;
If you have several regions, you can view their list by typing the command in the chat;
Restrictions
Many servers have certain restrictions regarding the privacy of the territory. It could be:
- Prohibition of allocating territory from the very bottom of the world to the sky;
- Ban on highlighting the entire world;
- Restriction on the allocation of blocks (for example, the maximum number of cubes in the territory is 30,000);
- Limit on the number of people in one region;
- On some servers it is forbidden to call the region by your nickname;
- Restriction on ownership of regions (for example, one person can only own 3 regions);
- Prohibition on the seizure of someone else's private territory.
When privatizing a region, be careful, find out what restrictions there are on the server and carefully check the territory. Especially the starting points, it may turn out that something completely different from what is needed will be attached. Don't add untested people, they can ruin everything you've worked so hard for. Try to create reliable protection from griefers and you won’t have to worry about your property.
Having played a single-player game of Minecraft, sooner or later the question arises of how to play on a Minecraft server. Undoubtedly, playing this wonderful game is much more interesting in the company of friends, this is why online Minecraft servers are created on which you can play for free.
Online
Minecraft survival on the server
Survival on a Minecraft server is more difficult than in a single player game, they play on servers different people, with different views and degrees of education. By playing Minecraft online you will have new friends on the server with whom you will be interested in playing via Skype. But there is also reverse side medals, be prepared for the fact that someone will try to deceive you and deprive you of your home, someone will kill you or throw you into a trap. And yet, survival in Minecraft on a server is much more interesting than alone.
Minecraft servers without registration
.I don’t understand why everyone is looking for Minecraft servers without registration, because registration is the protection of your account, and therefore everything you have. Without registration, anyone can just go to the server and take all your stuff. I think the point is that the shkolota is generally lazy and doesn’t want to use his brain, or maybe there’s nothing to use? It’s good that you are not like that and understand that you can’t do it without registration.
How to register on the server
.I will write all the registration commands on the minecraft server and it will become clear to you that there is nothing complicated here and you can easily register on any server.
/register [password] [repeat password] do not create a password 12345, complicate it with a letter
Otherwise, you will simply be hacked, or rather, they will guess your password and you will lose everything! If you have been hacked, read this.
An example of writing a command: /register R738161 R738161 or like this: /reg R738161 R738161
You are all registered and can start playing.
The next time you log into the server, you just write
/login [password you provided during registration]- authorization on the server after the main registration
An example of writing a command: /login R738161 or like this: /l R738161
Minecraft commands on Steve's World servers
that you must know./spawn - teleport to Spawn.
/kit start - get the server starting kit
/kit menu - get the server navigation book [In the book of warps and server news]
/menu - opens the navigation book with the command [the ability to open the book if it is not in the inventory]
/kit food - get free food
/rules - View server rules
/warp – see all server warps
/warp [warp name]– teleports you to this vapru
There are signs on the servers that execute commands for you, just go to the sign you need and right-click on it.
House point in Minecraft
.After registering, you need to think about housing. Having found a place for your future home, you need to put a point at home
How to put a dot at home? It's simple! By writing the /sethome command, the server will remember this location and in the future you can easily teleport at any time
to your home by writing the /home command.
Each time you register /sethome, the house point will change, so if you register it somewhere far from home, you will simply lose your old house. Ok, we figured out how to put a dot at home in Minecraft, let's move on to private meetings.
Having built a house, be sure to privatize it; privatization protects the house from breakdowns and disassembly, from griefers and ordinary players.
Be aware that an unsecured house can be broken by any player passing by and this will not be considered a violation, since the house is not secured, it means it is not someone’s.
Teams for private territory and property
:There are only commands for privatizing territories and chests, property. Be sure to read in detail
.
//wand - give out a wooden hatchet for marking territory and privacy.
/region claim [region name]- Create a private region.
/region addmember [region name] [player nickname]- Add a resident to the region Nicky can be added through a space if there are a lot of people.
/region addowner [region name] [player nickname]– Add an owner to the region, after which he will be able to manage the region like you
Attention: Be careful when adding players to private, especially owners. An unkind added player can kick you out and you will be left with nothing. There are many such cases on Minecraft servers when gullibility leads to the loss of everything.
The administration does not consider these complaints and does not return lost property, so that you yourself are to blame here.
/region removemember [region name] [player nickname]- Remove a resident from a given region.
/region info [region name]- View information about the region.
/region remove (or delete) [region name]- Delete the region you created.
/cprivate - install security on the door. It is advisable to close the doors immediately, regardless of whether they are wooden or iron.
Enter the command /cprivate into the chat and hit the door as if breaking [LMB], and so on with every door in the house.
/cprivate [Nicknames of friends separated by a space for access to them]- give access to the door
/cmodify [Friend nicknames separated by spaces]- with this command you can give access to your chest, stove, craft.
Attention! By giving access to your chest, you risk losing your things,
The administration is also not responsible for this action and will not return the items to you!
/cpassword [password] - Command to set a password for a chest or door.
/cunlock - open a chest/door using a password.
/cpublic - this command removes the protection on the chest and it becomes available to all players on the server.
/cremove - the same thing will remove protection from the chest
How to teleport to Minecraft
On the Minecraft server, you can teleport to players and accept their requests for teleports.
/call [player nickname] - using this command you send a teleport request to the player whose nickname you specified.
/tpaccept - this command allows the player who sent the request to teleport to you
Attention! This is a double-edged sword. Be careful when sending a teleport request to a player you don’t know, you might simply be thrown into a pit and killed; such traps are very popular on Minecraft servers, although people continue to use them for bans. Don’t send requests to those who write in the chat like - like everyone is giving me diamonds and so on, 90% of the time it’s a trap and they’ll just kill you, it’s also dangerous to accept requests from strangers, maybe he’s a PVP fan and by accepting it he can also attack you .
You must know and remember this always, The administration will punish the one who lured you into traps, but will not return your things.
On the server you can write hidden messages, personal ones, as they are also called. Having written such a message, only the person to whom it is addressed will see it.
/m [nickname] - message text
You can respond to the last personal message like this: /r [reply to hidden message] or also /m [nickname] message text
Works in Minecraft
There is an economy on Minecraft servers; you must know how to work in Minecraft, earn money and buy various blocks in the store.
visit the store using the command /warp shop
In order to earn money, get a job /jobs
If you want to know in detail, read How to get a job on a Minecraft server
Or by opening the Work on the Server section in the Menu Book
Another way to make money on the server is Mob - Rocking / warp mob, on the mob you not only earn money, but also level up your level.
For every kill of a mob or player, you are awarded money.
How to find out how much money you have? Write; /money
To transfer money to another player, enter the command /pay [player nickname] [amount]
For example; /pay Stiv 1000 you will thereby transfer 1000 game money to Stiv.
Donat Minecraft
Minecraft Steve's World servers provide paid services they are called donat.
purchased for real money, which is used to promote servers and the site.
All commands available to donators:
Teams to players with |
/kit skin - you get access to a special menu and the ability to transform into any mob
/kit skinplus - the same thing, you get access to a special menu and the ability to turn into any mob
Teams for players with
/Fly - enable flight mode
/Fly - turn off flight mode
Commands on the Minecraft server for players |
/gm 1 - Enable Creative | VIP | Admin
/gm 0 - Turn off Creative | VIP | admin
/hat – Put the block on your head that you are holding in your hands
/eat - satisfy your hunger
/workbench - virtual workbench [craft]
/jump - jump to the block you are looking at
/back - return to the last point of death or stay
/top – the ability to teleport to the topmost block, which is above your head.
For example, for instant teleportation from a cave to the surface
Admin commands in Minecraft
Here are all the server admin commands for Minecraft Steve's World.
Teams |
/invsee [Nickname] - Check the player’s inventory [Prohibited - taking or placing things]
/enderchest [Nickname] - Check the player’s ender chest [Prohibited - taking or placing things]
/oi [Nickname] - Check the player’s inventory [Prohibited - taking or placing things]
/oe [Nick] - Check the player’s ender chest [Prohibited - taking or placing things]
/clearinventory [Nick] ; /ci [Nickname] - Clear the selected player’s inventory [only yours]
/give [Nickname] [amount]- Give the player the specified item in N quantity [only to yourself]
/jump - Teleports you to the block you are looking at
/tp [Nick] - Teleport to the player
/tp [Nick X] [Nick Y] - Teleport player X to player Y [Prohibited without the consent of both]
/tp [Nick X] [Own Nick]- Teleport player X to you [Prohibited without X's consent]
/near ; /nearby [radius]- See which players are not far from you. Standard radius - 100
/more - increase the item you are holding in your hand to a stack
/weather off - disable rain [Set clear weather, reduces lag and server load]
/day - turns on the day [you shouldn’t use this command often, everything should go as usual]
/repair ; /fix - Repair a tool/armor/enchanted item
/kick [Nickname] [reason]- Kick a player [Must indicate the reason] [Violations - frequent kicking of players | no reason given]
/tempban [Nickname] [Time]- Temporarily ban a player For operators only.
/ban [Nickname] [reason]- Ban the player forever [Must indicate the reason] Only for operators.
/ban-ip [Nickname] - Ban the player’s IP address [The player must be on the server at this time] For operators only.
/ban-ip - Ban a player's IP [Regardless of whether the player is on the server or not] For operators only.
/unban [Nickname] - Unban a player For operators only.
/pardon-ip - Unban this IP address For operators only.
/mute [Nickname] [Time] - “Close the player’s mouth” [Must indicate time m - minutes]
/ignore [Nickname] - Ignore the player [you will not see his messages]
/whois [Nickname] - View information about the player [find out status]
/seen [Nickname] - View information about the player For Operators and Admins +
/getpos - View your coordinates
/balance [Nickname] - Find out the player’s balance
/balance - Find out your balance
/balancetop [page_number]- Show the top richest servers
Not full list commands, some commands may not be available, it all depends on the purchased admin panel or other service
Now you know all the Minecraft server commands and playing will become easier and more interesting for you!
