How to make a homemade mousetrap - we catch rodents in simple ways. DIY mousetrap - instructions for homemade traps Safe mousetrap flow chart

Getting rid of mice and rats in the house is not so easy, because. these rodents are fertile and survive even in extreme conditions. If you do not have pets or children in your apartment, then it is better to use mousetraps. And those who have a large family, which includes pets, can choose a model of a mousetrap that will not harm the pets, but will help get rid of rats and mice.

The mousetrap is a centuries-old remedy for rodents

Where to put mousetraps

If there are a lot of people at home during the day, it is better to put mousetraps at night. Rats and mice do not like to come out of their holes during the day. You can find out that they were in the apartment by the excrement that they leave in their places of residence. Rodents do not like open spaces, so they move along the walls. There you need to place mousetraps.

To get into the apartment, they make holes with a diameter of 4 cm or use any holes, even the size of a coin. Walk through the kitchen, carefully inspect all the walls, dark corners. If you find a mink, place a mousetrap near it. Sometimes rodents run after household appliances, behind furniture. Set the traps near the holes or along the wall, at a distance of 60-90 cm from each other. You can put one under the oven, in the pan section.

How to charge

What is the best mousetrap and how to charge it before use? You can choose any trap. But work carefully, use gloves. Rats and mice have sensitive noses. If the mousetrap itself or the bait smells like a person, they will not fit them.

Mechanical mousetrap

This is a simple design that is not expensive and is sold at any hardware store. It can be metal, which is suitable for catching rats, because. the most reliable. Mice are caught with wood. To catch rodents, it must be charged. It will be difficult to do this the first time, so be careful, because. she hurts her fingers.

This mousetrap consists of:

Trigger (1).
Clamp (2).
Holder (3).

To charge the mousetrap, take the bait and put it on the trigger (it must be securely fastened, otherwise the mouse will drag it and run away). Then we take the clamp and gently cock it. You need to put a holder on it and insert it into the trigger so that the holder slides off at the slightest touch. Now it remains only to put it where there are a lot of rats and mice.

How does a mousetrap work? The rodent touches the bait and touches the trigger. At this point, the holder slides off and releases the clamp. He slams shut and presses the mouse. If the mousetrap is not fixed, and a large rat gets into it, it can drag it with it.

Mousetrap design: the mouse pulls the trigger and the trap slams shut

Other types of mousetraps

Live trap for mice. It's even easier to charge. A bait is placed in a special hole, the structure itself is placed on a level place. As soon as the mouse is caught in the mousetrap, the trap closes. She does not kill the rodent, but catches it, you can then release the mouse away from home.
Electric mousetraps. They are powered by electricity. It is opened and placed along the plinth. The bait is placed inside. The mouse runs inside and receives a powerful electric shock that kills it. Before that, the mousetrap slams shut.
Cells, containers. The bait is placed in a special device. This device helps to catch live mice or rats.

All these species do not need to be charged, it is enough to put the bait in a specially designated place.

If the mousetrap smells like a person, the mouse will not approach it.

Types of lures

What food is better to use as bait at home, what do these rodents like? We are taught from childhood that mice and rats prefer cheese. In fact, most rodents are indifferent to cheese. How to lure them into a trap?

Salo. Choose fragrant chunks of smoked or salted lard. Old, rancid pieces will not attract mice. To make the delicacy more appetizing, before putting it in a mousetrap, “fry” it a little on a match.
Vegetable oil. Any will do, but the best is unrefined sunflower. They need to anoint a piece of bread. If you have sesame oil in your house, it is also suitable, this smell strongly attracts rodents.
Bread and pastries. It is good if it is bran bread with a strong smell. Choose pastries fresh and fragrant.
grains. Mice and rats are not indifferent to seeds and cereals. You can fill the trap with seeds, wheat, buckwheat or rice.
Smoked sausage. Its aroma may attract rodents, but they prefer natural products.

The appearance of mice in photographs and cartoons is tender. However, when gray tailed creatures enter the house, outbuildings, garages, the attitude towards them changes dramatically. After all, rodents cause not only material damage, which is calculated as damage to products, building materials, and electrical wiring. , helminths, which entails serious consequences for human health. Therefore, when rodents are found in their possessions, the issue of combating them is beyond doubt. How to make a mousetrap with your own hands and why this method is used most often - the answers to these questions will be useful to beginner mouse fighters.

Advantages of mousetraps

The fastest way to get rid of rodents at home is the use of rodenticides, that is, poisons. But this method has a number of significant drawbacks. In addition to the fact that their use is dangerous when small children or pets live in the house, the death of a rodent can occur in the most unexpected place. A decomposing body will exude a disgusting putrid smell for a long time, which is very difficult to get rid of. Yes, and the search for the carcass of the animal itself can end with a major overhaul of the premises. When using traps, these problems can be avoided.

And this is by no means all the advantages of mousetraps:

Even a schoolboy or a fair sex can make traps for mice with their own hands. After all, most designs in the manufacture do not imply soldering skills, technical knowledge or professional possession of a hammer and other tools.
Homemade mousetraps are in no way inferior to industrial options in terms of efficiency.
The cost of devices made by hand can be several times lower than purchased traps, since most of them are made from improvised means.

Varieties of traps

All mousetrap designs are a device, in the center of which is located, attracting tailed pests with its aroma. Depending on the type of device, the mouse either dies or continues to exist in anticipation of its fate. Types of mousetraps that you can make yourself:

spring, made of wood and metal knitting needles, act when the spring is triggered;
a variety of containers, ranging from all kinds of jars to a bucket or pan - the effect is achieved by shifting the center of gravity or a banal drop of the mouse from a height;
live traps - an automatic trap designed by Tishleev, a Zünner trap are more complex structures for self-manufacturing, can be either single or designed to catch several individuals at once;
glue traps - a modern version of live traps, they are compact and easy to manufacture and further use, trapping of living creatures is carried out by gluing a rodent to;
electronic traps powered by a network or other power sources - a bait is placed inside the module, and as soon as the rodent is inside, a powerful electric discharge is released, from which the mouse instantly dies.

The photos of the mousetraps below will help you assess the complexity of the design.

What to do with a caught rodent

Often the question arises, what to do with the mouse caught. If the animal remains intact and unmutilated, the most humane thing would be to take the captive to its natural habitat. In the case when he has damage, it is advisable to feed him to cats or take him to a garbage dump. Particularly compassionate persons before disposal can first put the mouse to sleep in an apartment or house, for example, by feeding it with poison. If a decision is made to leave the gray pest as a pet, it should be taken for examination to a veterinary clinic, and only after the conclusion that it is healthy, equip a new home for it.

Whatever manipulations are done with the captured animal, it is necessary to do it with gloves, since the possibility cannot be ruled out that the mouse is a carrier of various diseases or simply be rabid. The room in which she was, is subject to thorough disinfection.

The forums also offer more creative options for solving the fate of a captive animal: feed and eat, flush down the toilet, hook up with the mother-in-law.

How to make a bottle trap

What the fantasy of craftsmen does not reach when it comes to plastic containers for liquid products. Not without them and catching rodents. A plastic bottle trap is made in just a few minutes. You can make it from a poltorashka or a container of 2 liters. In the absence of the latter, mouse traps are constructed from a 5-liter bottle. Traps can be made in several ways.

Option number 1

The walkthrough looks like this:

Using a clerical knife, cut off the neck of a plastic vessel, approximately a third.
Lubricate the cut neck from the inside with any vegetable oil.
Put the bait inside the remaining part with the bottom.
Turn the element with a neck so that it is directed down the structure and secure it with tape or wire.

The mouse, tempted by the aroma of the bait, freely penetrates through the greased neck into the trap, but will not be able to get back. On the part of the neck where the cork is screwed, several fan-shaped vertical cuts can be made. This will increase the chances of catching a large rodent.

On a note!
So that the mousetrap from a plastic bottle does not turn over, a weighting agent is placed on the bottom: stones, a small bag of sand.

Option number 2

Catching a mouse in a bottle is even easier:

Cut off the top of the container where the constriction ends.
On the upper edge of the element with a bottom, make cuts 4-5 cm long with an interval of 1.5-2 cm. You will get a semblance of petals that need to be sharpened.
Bend the pointed edges down so that they look at the bottom.
Lubricate the walls of the trap with fat and put the bait on the bottom.

For the convenience of the mouse, small boards are attached to the device. The animal will climb them without interference, fall into the vessel, and sharp edges and slippery walls will not allow it to leave.

On a note!
A primitive trap is easy to make if you put the bait in a bottle of oil after using the product and slightly cut off the neck and bend it down.

Option number 3

This type of trap is somewhat different from the previous ones:

Cut off the neck of the bottle and throw it away. This part is no longer needed.
In the resulting container, it is necessary to drill two holes and stretch a rope or wire through them, through which the mousetrap will be tied.
Place the bait at the bottom and position the trap so that part of it hangs from a shelf or countertop. Fix fastening.

As soon as the mouse climbs for a treat, the center of gravity will shift, and the mousetrap will invariably hang with the captive. Catching pests with bottles is quite convenient. Consumables for their manufacture cost nothing, and captured animals can be disposed of along with the trap, which avoids direct contact with them.

Traps from large containers

A mousetrap from a bucket of water is a disgracefully simple, but very effective device. With its help, it is possible to catch several representatives of the mouse family in one night. Mousetrap manufacturing process:

Drill two holes in the top of the bucket.
Take a metal rod, the length of which is not less than the diameter of the bucket.
Put an empty bottle on the axis, after coating it with a mixture that is attractive to rodents, so that it can rotate.
Fix the rod with the strung bottle in the drilled holes. The neck should be as close as possible to the edge of the bucket.
Fill a third of the bucket with plain water.
Attach a kind of ramp from a plank to the trap, along which the mouse will climb for the bait.

Feeling the aroma, the tailed animal will climb along the bridge to the bottle, which, under its weight, will immediately turn over and drop into the water. Instead of a bucket, a deep basin or a large saucepan can be used.

The device is designed to catch several individuals at once. The construction process consists of several stages:

Take a wooden beam about 40 cm long. Drill 6 holes on the end part with a diameter of 2-2.5 cm and a depth of at least 1-2 cm. These will be holes for potential captives.
At a distance of 1 cm from the same side, cut the bar lengthwise to the bottom of the notches.
Drill 2 more holes perpendicular to the minks, into which the springs will then be attached.
Build a spring mechanism from the knitting needle, make a loop of strong thin wire at the end.
Insert the free edge of the spring into the previously prepared hole, fix it on the bar, hide the loop in the cut.
Pass the thread through the free holes.
Put the bait in the center.

The mouse will try to get to the treat and gnaw through the thread, as a result of which the spring mechanism will work, and the rodent will be in the hole prepared for it.

Adhesive structures

For the manufacture of a mousetrap, you will need small cardboard squares, sheets, each side of at least 5 cm. Construction residues can be used for the base - drywall, MDF panels, fiberboard, chipboard. The second necessary component is glue. You can cook it with your own hands according to the following recipe: mix rosin, petroleum jelly, pine resin and bituminous pitch. If you do not want to prepare the adhesive mass yourself, then the simplest way is to purchase special glue for rodents in a specialized department.

Further construction of the trap is outrageously simple. Glue is applied pointwise to the workpiece. In the center is a fragrant bait. The mouse is firmly fixed to the adhesive mass. The only drawback of such structures is the heart-rending squeak of the caught pest.

To or, often use a mousetrap house. A cardboard frame is being made. The inner walls are covered and in the middle - a traditional delicacy for mice. This design eliminates the risk of moving an animal smeared with glue around the room.

Electronic devices

Do-it-yourself electronic mousetrap can be made according to several schemes. For people with a technical background and knowledge of the laws of physics, making such a device will not be difficult. The simplest trap is a small device, in the center of which a fragrant treat is placed. When a mouse gets inside, the resistance of the circuit changes, as a result of which the damper closes and an audible signal is given to warn of the capture of the pest.

So, being the owner of a private house (in which I live only in the summer) and a house in a summer cottage (which I rarely visit), I ran into one problem: MICE! In the summer, this is not so scary, but, with the onset of cold weather, the problem becomes relevant - mice tend to heat and climb into houses. Of course, a great variety of mousetraps are sold in stores. And I bought and installed them. But after all, they have one common drawback - they catch one mouse! What if I'm not in the house every month? How many mousetraps can I install? ... You can, of course, a lot! But here, then, be sure to accidentally climb into them! After all, they are placed in "secluded places", or, a cat or a dog will do it!

So I made a homemade mousetrap (and more than one), which has the following properties: it can catch several mice, and it is absolutely safe for everyone who is not a rodent, and does not fit in a two-centimeter mink.)))

Today I made another such mousetrap and took a photo of the process. I made it for six mice, so we will consider just such an option.

So, we need:
1) Bar. (Any unnecessary one will do. The cross section is from 40 to 100 mm, to infinity ... Well, within reasonable limits. I do not advise making it from a sleeper))))) Length - about 6 centimeters for each "mouse place" - in my case - about forty centimeters)
2) Old bicycle spokes. (Again, one for each mouse - 6 in my case)
3) Thin knitting wire (I took 0.8)
4) Strong thread.

To begin with, at the end of our bar, we drill "blind" holes, with a diameter of 20 mm, and a depth of 8-10 cm. (The bar should be two centimeters wider). (These will be "minks" for mice). I did this using an adjustable drill bit for wood and a regular drill.

After that, we need to cut along the entire bar, stepping back about a centimeter from the edge where we drilled blind holes. The depth of cut should reach the bottom edge of our holes. I completed it with the help of a circle on a tree and the 125th small grinder (angle grinder). It can be done with a circular saw (circular), or even a hand saw. But in this case, you will not be able to make a mousetrap for more than 3 minks - the length of the hacksaw blade is not enough.

The next step - at a distance of about two to two and a half centimeters from our cut, we drill two holes across the beam, 2 mm in diameter. They must pass across each mink, dividing it into equal parts. For clarity, I inserted a wire into the drilled holes:

With the same drill, we drill a hole in the bar where the mink has already ended. We get this product:

Let's start assembling. We insert the springs into the hole we drilled opposite each mink:

After that, at the end of each spring we fix a loop of knitting wire:

And we charge the mousetrap: Compressing the spring so that the wire loop falls into our cut, we fix it by inserting something of a suitable diameter. I used the same file:

After that, we simply tie the spring with a thread passed through our two holes. I use a "gypsy" needle to make it easier to thread:

After that, remove the file and place the bait in the end of the mink. Better smelly. I used pieces of lard skin fried to a crust. (This can be done at the beginning. Even more convenient - the threads do not interfere)

Similarly, we charge all the minks:

What we have: a wire loop, which is larger than the mink in diameter, completely hides in the cut and does not overlap the mink. A mouse, seeing a hole, will naturally try to explore it. What’s more, it smells delicious! Having passed the loop, she will run into the threads blocking her passage ... and simply gnaw through them !! (Do not hesitate, checked.) Further - it is clear. The released spring will immediately jerk the wire loop up ... That's it !!! Not a single one has reached the bait yet))))) At the same time, the tail of the mouse sticking out of the mink does not scare away others! The rest of the minks are free! Upon arrival at the dacha, I sometimes shake out, pressing the springs, 10 mice each! All you need is a new thread. The bait lasts a long time.

They cause disgust or fear, in addition, they are carriers of a number of diseases, eat food and spoil surrounding objects. The device for catching rats and mice described in this article will help to solve the problem on your own. A mousetrap will be made with your own hands using improvised means.

In situations where it is undesirable to use poisons, because children or pets live indoors, and there is no time to purchase store traps, you can try to make a mousetrap with your own hands. The process is quite simple and does not require sophisticated equipment and skills. You will need paper, different containers (buckets, plastic bottles of different sizes) and household items that are in almost every home (wire, small pieces of wood, a school ruler, plastic bottles).

Many improvised traps are able to work autonomously, without recharging, and are designed to be triggered multiple times. Such mousetraps can be left when leaving home from the dacha (the main thing is not to leave the mousetrap for a long time, in order to avoid the appearance of a fetid odor). In a few days, there will be no trace of mice left, and nothing will have to be done or bought.

A little about bait

For the manufacture of a mousetrap to be productive, it is not enough to know how to make it correctly. Hunting cannot be successful without the desire of the mouse to go in the required direction, and only bait can provide it.

The opinion that mice are crazy about cheese is wrong and more related to stereotypes than reality. They do eat it, and most likely they like it, but there are much better types of bait for mousetraps:

Fragrant grains such as sunflower seeds
Fried bacon or sausage (especially blood sausage);
Dry bread dipped in vegetable oil (sesame will definitely not leave the mouse indifferent).

The best mousetrap bait - video:

Varieties of mousetraps made independently

Mice have accompanied mankind throughout its history and during this period people have come up with a lot of ways and devices to deal with them. Modern technologies have expanded this arsenal, but some old solutions are still relevant.

Plastic bottle

There are several ways to make a mousetrap from a plastic bottle, consider the most famous and simple:

We cut the bottle 3 cm from the middle closer to the neck;
We put the bait at the bottom;
Remove the cork and lubricate the inner surface of the neck with oil;
We insert the neck down into the second part and fasten both halves with glue or wire.

The mouse, smelling food, penetrates into the bottle easily reaching the bait through the oiled hole, and can no longer get out on its own.

An alternative way to make a mouse trap:

We find a container with a neck diameter sufficient for the mouse to penetrate inside;
We tie a thread of sufficient length to the neck so that its other edge can be tied to something without stretch;
We put the bait at the bottom and put the container on the edge of the table so that it overturns with a slight change in the mass of the hanging part.

The mousetrap works as follows: the mouse, smelling the smell of food, climbs into the bottle and provokes its overturning with its weight. Since the container is tied by the neck, it hangs on a rope, and the mouse will not go anywhere from such a situation. In addition, it will remain alive, so that it is also a humane method of controlling rodents.

Electro mousetrap

Unlike the previous one, this method does not differ in humanity. The electronic mousetrap works on the following principle:

We attach one of the wires to the metal plate (the metal should not be painted);
We coat the second wire with something edible for the mouse and smelling strongly, for example, peanut butter.
We connect the device to the network in such a way that the phase is with the bait, otherwise the mouse will immediately feel a small discharge and may change its mind to go further.

Bucket with water

A mousetrap from a bucket of water is made quite simply and there are a great many variations of it. Let's consider one of them:

We put a wire or a metal rod on top of the bucket (the welding electrode is the best option), it is advisable to fix it in order to prevent displacement or falling into the bucket;
We place some flat and oblong object perpendicular to the rod, for example, a school ruler. The ruler with one edge rests on the top of the bucket, the other is above the water.
To make it work at home, you need to put the bait on the edge of the ruler that is above the water, and make it easier to lift the mouse to the top of the bucket by substituting a board for it.

Catching occurs as follows: the mouse follows the ruler for food, and at some point the ruler overturns under its weight. In addition to the ruler, you can use any object, for example, a tunnel made of rolled paper.

Another simple mousetrap using a bucket:

A plastic bottle is pierced with a thin metal rod through the bottom and neck;
Food of interest to the mouse is attached to its middle;
The rod is placed on the bucket so that the bottle is in the middle of the bucket;

The mouse goes for food and as soon as it stands on the bottle, it scrolls, and the mouse falls into the bucket.

Bank with a coin

A very simple and effective mousetrap can be made not only from a can, but also using any other suitable container, such as a saucepan.

We attach the bait to the inner surface of the jar at a distance of about 4–5 cm from the neck (can be attached to adhesive tape);
The jar is placed upside down and a coin or button is placed under one edge of the neck for support.

If a mouse is wound up at home, it will definitely try to take the bait, and since the support is very sensitive (this can be seen in the process of putting the can on a coin), the can will certainly cover the rodent.

Adhesive

Do-it-yourself glue mousetrap is quite simple. To do this, you will need: special glue, the basis for its application and bait.

The base is lubricated with special glue for mice, which is sold at specialized points of sale. There is nothing complicated in the functioning of this trap, made by yourself. On the way to food, a base smeared with glue is placed. The animal tries to overcome it and sticks to the base.

The method will be of interest primarily to those who vehemently hate mice. The reason is his complete anti-humanity towards them. A rodent caught in such a trap is in for a long torment. He will not die right away, but will try to free himself for a long time, wriggling and food on the sticky trap that bound him. And all in vain - it is impossible to get rid of the glue even with the help of a person. In general, the method is not for the faint of heart.

Bank and sheet of paper

In addition to the jar, any container can be used. Also, you will need a sheet of paper, rope and bait. The tricky trap is done like this:

We prepare a paper sheet, for this we cut it from the center to the edges, so that in the middle it looks like a cross from cuts (there should be no obvious hole).
We cover the container with the prepared sheet, so that the center of the cuts is located above the middle of the container.
We tie the bait over the center of the whole structure and wait.

The mouse or rat will go for food and when it is in the area of the cut paper, it will fall into the container. The disadvantage of this method is that it works without misfires only with young individuals. An adult mouse, especially one that has had experience of getting into such situations, feels the danger and does not go further.

High-tech, computerized mousetrap

This marvel of technology uses several sensors to detect a rodent. A foreign developer, whose name is Jake Easton, thought of doing this. This homemade trap works as follows:

Special acoustic and visual sensors, having found a mouse in the reach zone, set in motion the operating lever of the device, under which the bait is located;
The mouse goes to the smell of the bait, and when it finds itself in the sensor triggering zone, the pneumatic actuator is started, which beats the unsuspecting mouse with a metal bracket with a force of up to 50 kg.

The result is the same as when a conventional spring mousetrap is triggered. The availability of computer technology has not made rodent control more humane. Jake Easton called his invention "Better Mousetrap", which translates from English as the best mousetrap.

Wooden

A fairly simple and safe trap for others, but to make it you will need a drill, drills, a hacksaw and some skill in working with these tools. Step by step:

From a tree we cut out a bar with a section of 40x40 mm and a length of 100 mm.
We drill a hole in it from the end to the entire length of the bar (but not through), with a diameter of 25 mm.
At a distance of 10 mm from the end with a hole, we make a slit (2–3 mm) on top in such a way as to partially open the hole.
Immediately after the slot (3 mm), we drill two through holes side by side so that the thread passed through them blocks the path to the end of the drilled cavity.
On the edge of the bar, opposite the entrance to the trap, we attach a spring with a loop opposite the slot.

The wooden mousetrap is ready to use. Catching mice is as follows:

We put the bait in the deaf edge of the mousetrap.
We lower the loop into the slot so that it matches the diameter of the hole and fix the spring with a thread.

The principle of operation is simple: the mouse tries to get to the bait and gnaws through the thread, the spring works and clamps the mouse with a loop. This version of the mousetrap is reusable, in addition, there are "apartment" designs.

Overview and operation of the live mousetrap - video:

Conclusion

Using all of the above methods of trapping and destroying harmful rodents, it will not be difficult to put one of them into practice yourself. All you need is a minimum of improvised means and a little patience. If the options seem not humane enough, you can entrust the matter to nature and get a good cat.

Mousetraps are a traditional way of getting rid of mice and work great with a small number of rodents. In order for fishing to be effective, you need to choose the right type of trap and the right bait, figure out how to charge the mousetrap and where to install it. Then the pests will not have the slightest chance to survive.

Types of mouse traps

The range of mousetraps is huge, almost all variations cope with their task. It remains to choose whether to kill the mouse or release it, to see the dead animal, whether to touch it or not. Also important are the cost of traps, the ability to buy them in large quantities, as well as safety for children and animals.

Modern mousetraps are mostly mechanical; a spring is used to actuate them, which is capable of slamming the trap with force or quickly closing the door.

with frame

The mechanism in mousetraps with a metal frame, the base is often made of wood, sometimes - from a sheet of metal. A rectangular frame equipped with a spring is fixed in the cocked position with a metal rod, put on a hook. The bait clings to the same hook. The mouse, pulling the bait, releases the frame that kills the animal. After each caught rodent, this trap must be set again.

To charge this mousetrap, you need:

put the bait on the hook;
with an effort to take the frame back 180 °;
holding the frame with one hand, turn the rod with the other and put a hook on its edge;
carefully release the frame.

Since it is not easy to properly charge this type of mousetrap, you will have to practice several times. The trap does not work if the hook is not on the very edge of the rod. The bait must be hard enough so that the rodent has to tinker and thereby start the mechanism.

Wooden mousetraps are not very successful from the point of view of hygiene - the blood and urine of rodents are absorbed into the wood, and bacteria multiply over time. A metal mousetrap is much better in this regard - it is easy to wash and treat with antiseptics.

with loop

A looped rodent trap is the simplest mousetrap. It is a wooden or plastic bar with one or more minks. Inside the hole there is a noose made of elastic wire, which is fixed with a thread. In the depths - top dressing. The mouse, trying to get to the food, gnaws through the thread, frees the wire and dies in a stranglehold.

To install this mousetrap, you need to thread a thread through the holes with a long needle or wire, bend the wire with a loop and tie a strong knot on top so that the noose is held by the thread in the lower position.

Traps

The device of this mousetrap is similar to traps for large animals, but the mouse trap is smaller and is located horizontally. Arcs are usually made of plastic, equipped with teeth around the perimeter. To set the trap, press the clip from behind, put the bait on the plate inside and release the clip. Similar traps are also available for rats, they are larger than mouse traps and equipped with a stronger spring.

There is also a humane mousetrap based on the same principle. It is much longer and top dressing is located in the depth of the structure. The jaws close when the mouse is fully inside, so it does not take damage.

Cells

The mousetrap cage is a box of metal rods with a door that slams shut with a spring. This design is called a live trap, more often it is used to catch larger animals - minks, muskrats, raccoons. You can catch a rat in such a cage. The live trap for mice is the smallest of them, but it is also arranged: in the middle of the box there is a hook, on one end of which the bait is put on, and on the other it holds the spring.

Swing

Another trap that does not harm the rodent is based on the swing principle. The design of the mousetrap is extremely simple, based on a long rectangular box, curved in the center like a boomerang. You need to install the trap so that the part that is closer to the entrance is in a horizontal position. The door in this case is fixed in the open form. Having reached the edge of the mousetrap, the mouse outweighs the swing, the door is released and slammed shut.

Pipes

The principle of operation of traps made in the form of pipes is that I don’t see, I don’t touch. They are designed for people who are afraid of mice or are disgusted by them. The mouse, running into a plastic opaque tube, is killed by a blow to the head or simply fixed inside with a slamming lid. You can shake it out of the trap without touching it and without seeing the animal.

Electrical traps

The most convenient rodent trap to use is an electric mousetrap. It does not need to be charged, human participation is minimal, just put the bait and plug the cord into the outlet. The mouse, getting inside, closes the contacts with its paws and instantly dies from a current discharge. Unlike mechanical models, which may not work at the right time, the electronic mousetrap has a 100% efficiency.

On the device there are light bulbs that indicate whether the trap is free or a rodent has already fallen into it. In some models, signal diodes are located at the end of a long cord so that you can push the mousetrap deep under the sofa and control the catching of mice without removing the device.

Destruction systems

Reusable electronic traps are called rodent extermination systems. Without a doubt, this is the best mousetrap - a small plastic box is equipped with an electric chamber and an overturning bottom. The instructions describe in detail the principle of operation - after the destruction of the mouse automatically appears in the container, and the trap is ready to work again. In the morning, all that remains is to remove the container and shake the pests out of it.

The use of destruction systems has only one drawback - their cost. For the price paid for one device, you can buy a hundred fairly effective simple mousetraps.

Bait selection

The right bait is the basis of successful rodent control. Even the best traps will be powerless if the mouse is not interested in the food offered. The prevailing opinion that mice are madly in love with cheese is not true. This product is far down the list of rodent preferences, the first lines are occupied by completely different baits.

A list of what to put in a mousetrap to lure a mouse is guaranteed:

sunflower unrefined little on a piece of bread;
delicious-smelling bread and fragrant pastries;
sunflower seeds and peanuts;
pieces of bacon, slightly charred on fire;
pumpkin seeds;
smoked sausage.

For traps without a trigger, you can use industrial mousetrap attractants, they are made on the basis of food products with the addition of odorous substances that attract rodents.

The rodent does not pay attention to the bait in the mousetrap if it does not suit his tastes. In this case, the product must be replaced. Also, mice do not respond to something tasty in a charged trap when they have access to human food - loosely covered food containers or a bunch of crumbs on the table and under their feet. You need to touch the mousetraps only with gloves, so there will be no human smell on them that can alert the mouse.

Installation locations

In rooms where children and pets live, it is better not to catch mice with open-type devices, since there is always a chance that a non-rodent will be caught at all. Loop traps are also not the best option - thin wire easily cuts the skin. In these cases, it is better to put a cage mousetrap or models of a similar action made of plastic pipes and boxes.

You can catch rodents anywhere in the apartment, even in remote corners they will still come across from time to time, but for greater efficiency, the installation of the selected mousetrap is carried out on the paths of pests from nests to products.

Mice prefer to hide under cabinets, in drawers, between furniture, in floor and wall cavities.

Modern renovation with an abundance of drywall is a dream for any rodent. The nest can also be located outside the house - in an adjacent shed or garage, in the attic, in the basement, in a bush or a pile of branches near the wall, in the crevices of the foundation. Then minks lead into the room - small holes near the floor. You can also determine where the mice are by the left excrement and spoiled products.

Traps are placed near these places along the baseboards and between furniture. It is better if there are several mousetraps, since mice are caught mainly at night, and it will not be possible to immediately recharge the devices.