Drawing how to build a toilet in the country. Do-it-yourself toilet in the country - instructions, drawing with dimensions. Features of outdoor toilets without a pit

The topic of organizing a toilet for a summer residence is quite complicated, on the one hand, in relation to the choice of a solution, on the other hand, the classic solution with a cesspool is quite laborious to implement. When arranging a country closet, you can go the traditional way by arranging a drain hole.
You can use dry closets for these purposes, if you are not embarrassed by maintenance costs, or use non-standard, but effective folk methods, for example, by arranging a peat toilet. Each of the proposed options has its own advantages and is applicable in certain cases. For a summer residence, you can make: a backlash-closet, powder-closet, a toilet with a cesspool, a peat and dry closet. Choose your option on how to make a toilet in the country with your own hands from the proposed methods, which best suits the conditions and budget

Types of country toilets and their differences

To make a toilet for a summer residence with your own hands for a summer residence and a country house, you need to choose the most suitable design from the options:

• pit latrine, made with a "perforated" pit, which is cleaned using specialized faecal processing equipment;
• play closet, this type of toilet can be made even indoors, involves the use of a sealed cesspool with access to it by a sewage machine;
• peat toilet, one of the types of dry closet, in which the composting of faeces is achieved using natural peat material without the use of chemical reagents;
• dry closet, a completely sealed system that requires cleaning with a commercially available recycle and deodorizing liquid.

Methods for arranging toilets on the site

Traditional pit latrine

A cesspool toilet is a traditional solution for suburban and rural areas. The design of such a toilet suggests the presence of a drain pit lined with red brick in a checkerboard pattern. As a result, the drain well has a natural drainage of liquid.
A toilet with a cesspool should be located at least 8 m from the house and 8 m from the well. It is believed that this version of the country toilet can pollute the adjacent soil. For these reasons, summer residents often use a blind cesspool design with bottom filtration, which involves the use of biological agents for the decomposition and biological treatment of waste.

The cesspool can be located directly under the cabin. According to safety precautions, taking into account the use of a toilet that has been unattended for a long time, the pit is made with a shift in relation to the back wall of the stall. This solution helps to ventilate the cesspool, provide access to it for making a septic tank or pumping out waste.

Sealed cesspool with bio-treatment

An environmentally friendly dead pit is a well with sealed walls, which can be done in many ways. Tight strapping in the classic case is made of clay and brick. During the laying of the well, a layer of clay mortar is made between the earth and the brick wall. The dimensions of the pit are standard, the drawing above can be used.
The pit can be sealed with a brick, concrete or iron jacket. In the lower part of such a well, pillows are made of crushed stone and sand, which act as a natural filter. It is not difficult to make such a toilet with your own hands. You can choose one of the designs of economical pits shown in the photo below.
Special antiseptics (SEPTIFOS, Scarab, KALIUS) are used for cleaning and processing waste from cesspools with natural cleaning. The principle of operation of the product consists in the monthly introduction of a solution with biobacteria into the well, which decompose feces, industrial water goes into the ground through the lower drainage.

play closet

Backlash closet is a toilet with a fully sealed cesspool, the waste from which is pumped out by a sewer machine. A design with self-cleaning and pumping out process water using a drainage pump and using it for irrigation can be implemented.

The advantages of this design are that the toilet can be placed indoors at home, that is, we are talking about creating urban living conditions. For this option, you should think carefully about the location of the bathroom and the well in order to ensure the entrance of the sewer machine and the supply of water to the house. It is better to do this at the stage of designing a house and a plot.
A more complex option for building a backlash closet is the construction of an autonomous pit, which also involves the use of septic tanks. Please note that the water in the drainage must be diverted several meters from the house to prevent the creation of a floater under the house. To place a well near a sealed pit, you need to be sure of the quality of the concrete lock or install an additional filtering system for the water supplied to the house.

Building a toilet cubicle

The toilet cubicle is mainly built from lightweight materials. A more capital construction involves the construction of a booth from brick, clay or other materials. In the simplest case, it is made of wood or on a frame basis.
The dimensions of the building can be approximated to the following dimensions 100 x100 x 2000 cm, the slope of the roof is provided by increasing the height of the cabin from the front side by 30 cm, that is, up to 230 cm. In this case, the size of the roof sheet will be 114 x 145 cm. make a strip foundation or use concrete supports as in the photo.

Original street toilets

When thinking about how to make an outdoor toilet, pay attention to the design of the stall. It can become not only a nice addition to the site, but also an interesting element of garden decor. The photo shows some of the options that you can apply on your site.

Alternative ways to organize a toilet in the country

DIY peat toilet - powder closet

A powder closet is a variant of a non-waste dry closet that can be arranged anywhere without the laborious construction of a cesspool. Instead of water, peat is used, which completely suppresses odors and ensures the biodegradation of waste. As a result of processing, ready-to-use compost is obtained.

To install such a toilet in an outdoor cabin, it is enough to make a wooden stand and put a bucket of several tens of liters. The dry closet will be ready for use.

Peat compost dry closet of factory production

Peat compost dry closet is one of the types of outdoor toilets based on the natural processes of processing fecal matter. The basic principle of its device is the presence of a container where waste is collected and processed by bio-fermentation along with peat. You can make such a toilet yourself or purchase a ready-made container adapted for this purpose with the removal of unpleasant odors. Ready-made peat toilets can be placed indoors.

The main difference between a ready-made peat toilet and a self-made peat toilet is a perforated container with a volume of 45 (!) liters, which improves filtration processes, evaporation and prevents the waste mass from acidifying. When installing a peat toilet in a street booth, the filtered liquid fraction is discharged into a drainage pit. Ready-made toilets are adapted to work at a temperature of -40C to +60C, and are also resistant to UV radiation.

Portable dry closets

For many people, dry closets are the best choice for giving. Despite the cost item for cleaning storage tanks, this option completely replaces stationary toilets in terms of comfort. On sale there are models designed for different tank sizes, respectively, for operation with a different number of family members. Such toilets completely eliminate the presence of an unpleasant odor and can be installed directly in a country house, in a separate room, only for ease of use.

It is better to opt for a model that has a standard height and a reliable piston drain. These features will make operation more comfortable, although there are less expensive models on sale that are unpretentious, simple and easy to use. The average dry closet model is designed for an average weekly operation by three people and 50 visits. The most convenient models have a full indicator and a pressure relief valve, which eliminates the occurrence of problems during operation.

Video instruction for the construction of a country toilet (video)

We offer you to watch How to make a toilet with your own hands video. This little guide will help you find the best solution.

🔨 A country toilet is easy to do with your own hands, if you make some efforts and efforts. We have selected drawings with dimensions for popular country toilets that will last you for decades! Also in the article you will find a step-by-step photo-instruction for the construction of a country toilet.

The most time-consuming step in the process of building a latrine will be digging a pit, but this work can also be done. The aesthetic side of the building is a secondary issue, the most important thing is to properly arrange a cesspool and create a reliable foundation for an above-ground structure.

It should be noted that some owners of suburban areas do not build a toilet according to the rules and manage with an ordinary bucket substituted under the toilet seat. But, one way or another, waste products need to be put somewhere, so you still can’t do without a capital pit. Therefore, it is better to do all the work correctly once and not return to this issue for many years. It is especially important to make a capital building if the residents spend a significant part of the year in the country.

When if if you don’t want to spoil the design of the territory of the site with the installation, then you can hide it in the far corner behind the house, or you can come up with a design for it that will help to organically fit the building into the landscape.

Choosing a place for a closet and its design

Usually the toilet is installed closer to the far boundary of the site, and this is understandable, since at least a slight smell will be present in or near this room. But sometimes they use another option, arranging a cesspool near the house, and a free corner of the house is allocated for the toilet, leading a wide sewer pipe into the pit. This design is mainly used in cases where water is supplied to the house, and there are plans to install an insulated container for collecting waste.

In any case, you should adhere to the standards established by the sanitary and epidemiological services. They must be observed in order to protect yourself, your neighbors and the environment from undesirable consequences, such as infectious diseases or soil contamination.

• If a cesspool is arranged, it must be located at a distance of at least 30 m from water sources, and its depth should not reach groundwater.
• If a septic tank is installed, then it is located no closer than 15 m from the house.
• If you plan to use an insulated container, which will be cleaned as it fills cesspool machine, then it can be installed anywhere, since the waste will not flow into the ground.

An insulated container is also a way out in cases where groundwater does not run too deep and a cesspool dug in the ground is not possible.

Usually the pits of the simplest country toilet have an area of ​​\u200b\u200babout one square meter. If the pit comes off round, then its diameter should be approximately 1 m. Its depth is 1.5-2 m, depending on the depth of groundwater.

After the place for the pit is determined, you can proceed to the choice of toilet design.

• The first thing to consider is the weight of the structure - it will largely be determined by the material that is planned to be used for construction. The house itself should not be too heavy, because over time, the soil under its weight may begin to sag and, in the end, the building will deform and be damaged.

For construction, wooden bars and boards, or thin metal - galvanized profiles and corrugated board, are well suited.

If it is decided to build a toilet booth from logs or bricks, then you will have to think about a well-fortified foundation. But there is absolutely no need to build such heavy buildings, since they still will not become warmer than light buildings. It's better if it's necessary thermally insulate the room with heaters that are light in weight, for example, foam. Such a building will be both light and warm, not blown through during the cold season, and it will not be excessively hot in it in summer.

• Having decided on the material, you can proceed to the size of the booth.

Typically, a standard toilet has a width of 1 m, a height of 2.3 m, and a room length of 1.3 ÷ 1.5 m. However, these dimensions are by no means a dogma and may well vary. In any case, the room should be comfortable for any family member to be in it, both standing and sitting.

What will be required to build a toilet

Having decided on the design and placement of the toilet, they acquire the necessary materials for its construction. A wooden or metal "house" can be bought ready-made. If you decide to build it yourself, then you will need the following materials:

• Boards and wooden blocks.
• Fasteners - nails and screws.
• Metal corners to reinforce the structure of the wooden frame.
• Door handle, hook or latch to close the door.
• Roof covering material - slate or corrugated board.
• Plastic or wooden toilet seat with a lid.
• At necessary - foamst for the insulation of the booth, and the material for the inner lining of the insulated walls, chipboard, thin board or plywood.

For the device of the cesspool you will need:

• Cement, crushed stone, sand.
• Reinforcement to strengthen the foundation of the house.
• A metal chain-link mesh for covering the pit and metal brackets or pins for attaching this mesh to the ground.

Another option, instead of a grid and plastering it with concrete, may be a brick, which is lined with the walls of the pit.

In addition, for the device of the pit, they often use those that have holes in the walls. Many summer residents prefer old rubber tires of large sizes.

Another, the most environmentally friendly option, can be ready-made capacity- septic. They are produced in different sizes, so you can choose the right one, depending on the number of family members and the length of the period of residence in the country.

Naturally, when building a country toilet, you can’t do without tools, so you need to have:

• A hand drill that can help when digging a pit.
• Shovel and bayonet shovel, with a length and a short handle.
• If the soil in the area is rocky, you may need a rock drill.
• Hammer and screwdriver.
• Grinder - "Bulgarian" with discs for stone and metal.
• Electric jigsaw.
• Marking tool - ruler, tape measure, square, building level, pencil or marker.

Prices for popular septic tanks

Cesspool device

Toilet classification
by type of waste disposal

Of course, they always start with marking and digging a hole. It will have a square or round shape, depending on the chosen design.

1. If a two-chamber plastic septic tank is to be installed, then the pit is dug in such a way that the inlet pipe is located directly in the toilet cubicle, since a toilet seat will be mounted on it. The neck of the second chamber should remain outside the room - it is needed for regular pumping of accumulated fecal matter.

Tanks come in different shapes, and the dimensions and shape of the pit will depend on this. The size of the pit must be made 20-30 cm larger than the existing capacity, since the soil must be well compacted around it.

2. If the walls of the pit will be finished with concrete or brick, it can be made round or square.

• After digging a hole of the required depth, at its bottom it is necessary to arrange drainage from large rubble, stones, fragments of bricks
• Then, its walls are covered with a metal chain-link mesh with cells measuring 50 × 50 mm. The mesh is fixed by driving into the ground with steel wire shackles or pins.
• To make the walls stronger, you can additionally reinforce the walls with a metal grate with large cells 100 × 100 mm.
• Further, by the method of throwing, a concrete solution is applied to the walls, which is left until it dries completely. The total thickness of the concrete layer should be about 50 ÷ 80 mm.
• After setting the first layer, the walls are plastered to a smooth state with the same concrete mortar. The plastered hole is left to dry.
• The pit is covered with either a finished reinforced concrete slab, or made locally. It will serve as a foundation for the toilet and a platform around it.
• Boards are laid on the pit, which should go beyond its limits by 700 ÷ 800 mm and be sunk into the ground to the same level with the ground. Boards must be treated with antiseptic agents. This wooden substrate under the foundation can be completely replaced with concrete columns.

• Two holes are left on the surface for installing a toilet seat and for a cesspool, which should later be covered with a lid. Formwork is installed around future holes.
• A dense polyethylene film is spread over the entire area of ​​\u200b\u200bthe future foundation.
• Reinforcing mesh is laid on top of it, which is enclosed in formwork around the entire perimeter of the future foundation.

• The height of the hole formwork must be the same as that of the entire foundation formwork. Formwork boards will serve as beacons when leveling the surface.
• The concrete solution is mixed, poured onto the site, leveled and left to dry. For the durability and strength of the outer concrete layer, it is possible, after the initial setting, to iron the wet surface with dry cement.

• On the finished site after its full maturation, it will be possible to install a booth for the toilet. A hatch must be arranged on the hole intended for pumping out accumulated waste. You can buy it at the store or make your own. The hatch cover should be easy to open and close.

3. Another option would be a round pit with car tires laid in it. But it should be noted that this type of cesspool is not suitable for permanent use. Such a toilet can only be used in country conditions, when residents come only occasionally, for example, on weekends, otherwise the collected waste will often have to be pumped out.

• For a cesspool of this type, a round pit is dug 150 ÷ ​​200 mm larger than the diameter of the existing tires.
• A drainage layer with a thickness of 15–20 cm is laid at the bottom of the pit.
• Then, tires are laid exactly in the middle of the pit. on the to the other to the ground.
• Around the tires, as they are laid, drainage from crushed stone and sand is filled up and compacted. This process is carried out to the very top.
• When the tires are completely laid, a shallow strip foundation can be arranged around the pit. To do this, a trench about 500 mm deep is dug around the perimeter of the future toilet, into which concrete will be poured.
• trench bottom compacted and covered with a layer of sand of 50 ÷ 70 mm, which is also compacted and closed with a layer of crushed stone of the same thickness.
• The waterproofing is made of dense polyethylene.
• Then you can proceed in two ways:

– weld and install the reinforcing grid, mount the formwork 100 ÷ 150 mm high above ground level and then pour concrete mortar;

- lay out the foundation of brick, and then plaster it with cement.

• After the mortar has hardened, the formwork is removed from the cement foundation, and the brick is leveled from above.
• A roofing material is laid on its surface, which will separate the concrete surface from the wooden one.
• A finished toilet structure is either installed on the foundation, or it is built independently.

For the convenience of the construction process, a wooden base-frame made of powerful bars is first fixed to the foundation, and other structural elements will be mounted on it, depending on the chosen building model.

4. It is impossible not to mention one more way to equip a cesspool - using metal barrels with a cut bottom. They are installed one on top of the other and in the same way as in the previous case. Around the resulting pipe, a gravel mixture or a mixture of sand and crushed stone is tamped.

Cesspool of metal barrels - obviously will not last long

Prices for country toilets

country toilet

It would seem that the method is simple in execution, but it has much more disadvantages than advantages. Metal barrels under aggressive influence both from the inside and outside, from the side of the ground, corrode very quickly, and such a toilet will last for a very short time.

Popular country toilet projects

Construction of a country toilet house

When both the pit and the site for installing the toilet room are ready, you can proceed to the installation of the house according to a pre-compiled scheme.

Toilet houses can have a wide variety of forms, for example, even in the form of a fabulous hut. The uninitiated will not immediately determine what kind of room it fits so perfectly into the landscape design of the site. It is quite possible to do such a structure with your own hands, knowing the scheme of its assembly.

The photo shows an option partially made of logs, which give this building a decorative effect, mask the purpose of the building itself.

The original teremok - you will not immediately understand that this is a toilet

The diagram shows the basis for building a log cabin, only boards are used instead of logs. You can clearly see how the walls are assembled and the roof slopes rise. Allocated interior space and selected location toilet seat.

Approximate scheme "teremka"

The next step will be the roof lathing, roofing and wall cladding with the material chosen for this - it can be either wood or metal.

Such a house can either be installed on a cesspool, or used as a room for a dry closet.

Video: making a house - "teremka" for a country toilet

Another version of the structure of the toilet, which is called the "hut". In this case, the house is built in the form of a triangle, and its side walls are also a roof. The form is quite simple, so it will not be difficult to build a building.

Toilet - "hut"

This design is not only easy to build, but also convenient to use - it is stable at the base and quite spacious inside.

Installation of a toilet - "hut"

The presented figure shows the entire internal structure of the house, the installation location of the toilet seat and the method of lathing the roof walls. Sheathing of the front part of the building and the rear wall has begun. The “hut” house can be placed on an equipped cesspool, as in this case, or it can also be used as a room for a dry closet.

This form of the house can be called traditional, since most often it can be found on the plots. But even such a simple design can be decorated according to your preference.

For example, it was decided to make a toilet in this backyard territory under a Japanese house. This is evidenced by hieroglyphs written on a tablet hanging on chains, a Japanese lantern at the entrance, and even an additionally arranged roof. In addition, the interior design of the room is also designed in the general style.

A similar attitude to the design of the site suggests that even from such a structure as, you can make a small work of art if you make a little effort.

An approximate scheme for the construction of such a toilet is shown in the figure. It clearly shows the arrangement of a cesspool, the installation of a toilet structure and a hatch for cleaning on top of it. The design is quite simple in the device, and it is not difficult to build it. But in order for it to be reliable, it is necessary to achieve the rigidity of the ligaments of all parts among themselves.

The interior space of the toilet, arranged above the cesspool, in the process of building walls, may look like this. That is, the base bars are installed on the foundation, on which the frame of the future structure is fixed.

After the final finishing of the toilet from the inside, the room can have such a neat and cozy look.

If desired and opportunities can come up with another design for a country toilet, but you need to do all the interior decoration from warm materials. It is not recommended to use ceramic tiles for decoration, as this is a very cold type of material, and besides, in winter, the tile also becomes very slippery.

Video: several options for a country toilet device

dry closet

If there is no way to build a country toilet, or there is simply no desire to get involved with construction work, then you can use a dry closet. This option will save you from digging a hole and, possibly, from installing a house.

Dry closet - an excellent solution for country conditions

- this is an autonomous toilet that does not require a separate room or connection to branch communications

The dry closet consists of two compartments-chambers, the upper of which plays the role of a toilet, and the other serves for the biological processing of waste. In the second, lower chamber, there are active substances that decompose feces and turn them into a homogeneous, odorless mass. The action of the bioactive liquid for the decomposition of waste is enough for ten days, then the chamber is cleaned by pouring the contents into the central sewer or into the soil. The method of disposal will depend on which active substances will be used in the dry closet. These substances are t three types: composting, chemical and microorganic. Each of them is suitable for a certain type of dry closet.

• For a composting dry closet, peat is used as an active substance. It has a high absorbency - for example, one kilogram of peat absorbs ten liters of liquid. The odorless compost obtained from active processes is perfect for fertilizing garden beds.

Usually, complete with such a dry closet, there are tons of ventilation pipes that remove unpleasant odors during processing.

• The dry closet, whose work is based on the use of chemicals, has an indicator that will indicate that the container needs to be cleaned. Waste processed in this way is discharged into the sewer in order to protect the environment. For such models, special substances with non-freezing properties are produced.
• The third type of this useful device is a dry closet, in which microorganisms are involved in the processing of waste, turning them into compost. The resulting material is environmentally friendly and harmless to soil and animals, so it will not be ore to dispose of it.

Advantages and disadvantages of a dry closet

• high levels of environmental safety;
• ease of use;
• lack of unpleasant odors;
• affordable price;
• durable material.

• odor leakage is possible, installation in a ventilated area is required;
• if the receiver tank is very dirty, you will have to wash it yourself.
• in rooms with low temperatures, it is not possible to use a peat dry closet. From the cold, all processing processes stop, the contents of the lower reservoir freezes, as well as the peat itself. The problem is solved by transferring the dry closet to a warm room.

If desired, a dry closet can be installed in the most ordinary, self-built room, which is located in the yard, and for the winter period, bring it into the house, setting aside a convenient corner for these needs.

Prices for a popular range of dry closets

Dry closets

Biological products for toilets

To help the owners of summer cottages with pit latrines on their territory, special tools have been developed similar to those used in dry closets.

Before using the product, it is necessary to study the instructions, as the composition is poured or poured in parts. How to use such substances correctly can be found in the information on the package, since each agent is dosed differently. Such a substance is used, as a rule, very sparingly. For example, one package or a can of some funds is enough for a year for a cesspool with a volume of 3.5 ÷ 4 tons.

So, there are many ways to solve the problem of a country toilet - there is always the opportunity to choose one or another option.

This article presents samples of country toilets: drawings of booths, their average sizes, some recommendations for construction. The design can be different: there are rectangular, triangular, diamond-shaped projects.

Choose the shape, then the material, and you can start building. There are drawings, the structure is not the most difficult. Just keep in mind that the sizes are given for people of average height and build.

They can be easily changed without changing the design too much.

The design of a country toilet can be simple or intricate.

Scheme of a street toilet

The most common variant of a country or garden toilet is a rectangular building. It is also called the "birdhouse" because in the variant with a shed roof it is very reminiscent of it.

The project of a country toilet made of wood of the "Birdhouse" type (to increase the size of the picture, click on it with the left mouse button)

In the toilet drawing shown in the photo above, a 40 mm thick board was used for finishing. The construction is quite inexpensive. Doors can be made from the same boards, fastened with planks at the top, bottom and obliquely. Loops can be placed external - barn, having decorated the structure in a deliberately rough style.

Samples of country toilets: the drawings are the same, the execution is different

Despite the fact that the building is utilitarian, if desired, it can be given an attractive look and the birdhouse will turn into a quite attractive small building. For example, you can make a small mill out of this building.

Country toilet-mill - a little imagination and an unsightly building becomes a decoration of the site (to increase the size of the picture, click on it with the left mouse button)

The same birdhouse, but from a log house - a completely different look. Everything will look especially harmonious if the building on the site is built (or will be built) also from a log.

Even the simplest log toilet looks almost exotic. Moreover, it can also be used as a winter version (to increase the size of the picture, click on it with the left mouse button)

For regions where wood is a luxury, and it is irrational to spend it on building a toilet, the same structure can be sheathed with other material. For example, the frame is sheathed with any sheet material - plywood, fiberboard, GVL. On the outside, you can lay finishing material - tiles or decorative stone. An even more budget option is to sheathe it with corrugated board.

A toilet in the country with their own hands is built from any material. This one is made of corrugated board (to increase the size of the picture, click on it with the left mouse button)

This is the type of toilet that is easy to build with bricks. They are usually made in half a brick. There are no difficulties even for an inexperienced bricklayer. Offset masonry, cement-sand mortar.

According to the same project and drawing, you can build a brick toilet (to increase the size of the picture, click on it with the left mouse button)

Step-by-step instructions for building an outdoor toilet here.

Toilet type "Shalash" (triangular)

This toilet cubicle has the shape of a triangle. The side walls are also the slope of the roof. You can build such a toilet with your own hands in a few hours. Drawings with approximate dimensions are given in the picture below. It is possible and necessary to make adjustments to them: all dimensions are given for people of average build.

Drawing of a country toilet of the "Hut" type (to increase the size of the picture, click on it with the left mouse button)

If you need wider doors, you can not push the base, which is already considerable in this project, but make doors of a non-standard shape - as in the figure on the right.

Sheathing with finishing materials in the "Shalash" toilets is carried out only in front and behind. Roofing material is laid on the side surfaces. You can use any, but soft tiles or polymer slate look good.

Having drawings, a triangular toilet in the country is easier to build

In the photo on the right, the crate is made under sheet roofing material - they used plastic slate - it is available in different colors, it is relatively inexpensive, it is easy to install - with nails and gaskets.

If you plan to use soft roofing material - roofing felt, shingles or something similar, make the crate solid - from a sheet of moisture-resistant plywood, chipboard, GVL. They are attached to the frame with self-tapping screws, roofing materials are laid on top.

Read about ventilation in outdoor toilets and showers here. How to get rid of odors is written in this article.

Drawing toilet "Teremok"

This toilet is shaped like a diamond. Compared to the "Shalash", it takes longer to build, but it also looks more decorative. With appropriate design, it will not spoil the landscape at all.

Drawing of the toilet "Teremok" with dimensions (to increase the size of the picture, click on it with the left mouse button)

A diamond-shaped house for a toilet in a summer cottage looks good. Outside, the frame can be upholstered with a round timber of small diameter sawn in half, a lining of large thickness, a block house, an ordinary board. If you use a board, do not nail it end-to-end, but lay it a couple of centimeters on the bottom, like a fir cone. You can, of course, end-to-end, but the appearance will not be the same ...

The second option: the country toilet "Teremok" is made with beveled side walls.

Country toilet "Teremok" - the second project with dimensions (to increase the size of the picture, click on it with the left mouse button)

The main snag in any small wooden toilet is to secure the doors well. The door frame is the most loaded part, especially on the side where the doors are attached. To fasten the door pillars to the frame beams, use studs - so the fastening will be reliable.

Photo illustrations: building a toilet in the country with his own hands. The drawings are shown above.

From this simple, in general, design, you can make a restroom in any style. For example, in Dutch. The decoration is simple - light plastic, on top of which characteristic beams are stuffed, stained with stain. Pay attention to the glass inserts and the fact that the roof of this instance is made of polycarbonate. If the polycarbonate is multilayer, it should not be hot)))

Country street toilet in the form of a Dutch house

You can even turn the Teremok toilet into a royal carriage. This is not a joke… confirmation in the photo. All you need to do is change the shape and add a few decorative elements that are typical for carriages. So you get a toilet in the form of a carriage.

Outdoor carriage toilet

Here are some photos of the manufacturing process. The original has a dry closet, so the construction is simple: there is no need to think about the pit and the nuances associated with it ... but you can adapt such a booth to any type ...

Frame of characteristic shape

Please note that the shape is achieved thanks to the boards set at an angle, and the smoothly tapering bottom is due to the supports cut accordingly.

A dry closet is installed on the podium

The floor is sewn up with short boards, then the sheathing starts from the outside. At the top, the carriage also has a smooth bend - cut out the appropriate guides from short boards, nail them to the existing side posts, and you can start the outer wall cladding.

wall cladding

Inside is also sheathed with clapboard. Outside the toilet-carriage is whitewashed, inside the wood has a natural color. After that, decoration and the addition of characteristic details remain - monograms painted with gold, lanterns, “golden” chains, wheels.

Painting and decorating

"Royal" curtains and flowers))) There is even a washstand and a small sink.

View from inside the windows

After all the efforts, we have the most unusual toilet in the area. Few can boast of such...

Also suitcases in the trunk))

Warm restroom

Using a toilet with a wall in one plank in the summer is quite comfortable. But not all dachas are visited only in the warm season. For the autumn-spring period, at least some kind of insulation is needed, which will block the drafts.

In this case, the design of the toilet is no different. Only increase the dimensions by 5-10 cm more: the sheathing will be double - outside and inside, and insulation is laid between the sheathing. The doors will also need to be insulated - double doors are too heavy for such a building, but from the inside they can be upholstered with a piece of linoleum, dermantine and other well-washable material.

About building a toilet with your own hands (with a photo report you can read here).

Combined shower-toilet

The second necessary building in the country is a shower. And if so, then why build two separate structures, if they can be built under one roof. Several drawings of country toilets with a shower for self-construction are published below.

A variant of a combined toilet for giving a shower (to increase the size of the picture, click on it with the left mouse button)

The second project of toilet and shower under one roof.

Appearance and drawing of a toilet and a shower for a summer residence in one building (to increase the size of the picture, click on it with the left mouse button)

View and dimensions of the toilet + shower from the front and side (to increase the size of the picture, click on it with the left mouse button)

As you guessed, the structure is simply doubled in width. If you want, you can create your own project, according to your desires and needs. The drawing of the hozblok with a toilet will be exactly the same. You may need to make one of the rooms a little larger. Just provide for this when planning and manufacturing supports for construction.

The idea for a toilet in the country: 100 photos, drawings, diagrams, instructions

toilet for a summer residence

A good idea. You can't do without a toilet in the country. If there is running water and sewerage, why not make normal amenities instead of those notorious ones that are always “in the yard”? It already depends solely on the decision of the owners. It is not necessary to resort to the services of professional builders, you can get by with just the advice of specialists.

Of course, you need to be able to supply water and organize sewage, but it is still quite possible to do this in the country. You will have to spend money on communications, and the process is quite time-consuming, but the result is worth it. The building, as you can see, is very neat inside and out, there is a washbasin, a mirror, a towel - comfort and convenience come first.

Do-it-yourself classic country toilet

Of course, it's great if your country house has a sewerage system, but more often than not, this is a rarity, so usually they build a wooden classic country toilet with a cesspool.

In general, it all depends on the conditions and opportunities, but one thing is absolutely clear, without this interesting building, nowhere. And since the toilet is a small architectural form, you can make it a decoration of your site.

It all depends on imagination, but if there is none, then everyone can build a mini-house from bars and boards over a cesspool, and design is a secondary issue.

These step by step photos show how to make a classic country toilet. The pictures show all sizes, so that the amount of material can be calculated.

In addition, you will need screws for fastening fittings and other parts, a saw, a hacksaw, a chisel - in general, take the entire carpentry set.

You carry out the construction of the booth, as shown in the photo, at the beginning of the base, frame, then sheathing, installation of the roof and doors.

The most problematic part, the cesspool, is not that difficult, but laborious. Its depth should depend on how often the establishment will be used, but at least one and a half meters, a meter wide by a meter. This diagram shows what it should look like.

Other options are possible, it depends on many factors, ranging from the density of the soil to the location of your site. For example, if it is possible to pump out the contents of the cesspool with a cesspool machine, then the bottom and walls are made airtight and of such a size that the pumping hose is taken out.

True, problems may arise in winter, so you will have to think about heating not only the room, but also the contents of the pit.

Types and designs of toilets and cesspools can be different - powder closets, peat, dry closets, and if there is a sewerage system, then everything is simpler.

Biotulets, of course, are expensive, but you you can make a peat toilet, such a kind of alternative to the bio option.

Such a thing is easy to do with your own hands, it is an ordinary box of plywood and boards. On step by step photos you can see how to make it.

A box is made, a bucket of peat is placed in it, and as it is filled, you remove the contents into a compost heap. Here is such a simple scheme of the circulation of substances in nature.

Do-it-yourself toilet in the country from improvised materials

The main task of this necessary room is to hide from prying eyes, aesthetics, this is the second thing, so any materials are suitable for construction. This toilet in the country is made from improvised materials, and looks good as you can see.

An old brick, a few corners, slate and lining came in handy. The order of work is well displayed in step-by-step photographs.

A few details, an ordinary old door is used here, it is simply sheathed with a sheet of corrugated board, the seat is made of concrete, well, you will need some ceramic tiles on the floor.

Do-it-yourself toilet in the country: drawings, photos, dimensions, video instructions

DIY toilet in the country: drawings, photos, dimensions, video instructions. Any suburban area can not do without a toilet.

Due to the lack of sewerage or the impossibility of arranging it, the benefits of civilization, in the form of a toilet bowl in a warm room, are not available to many summer residents.

Therefore, it becomes necessary to build an outdoor toilet in the country with their own hands, the drawings, dimensions and design of which each summer resident selects independently.

Wooden toilet surrounded by greenery and flowers

Types of toilets in the countryside

There are various methods for arranging toilets in a suburban area, which are used in places where there is no sewage system. All of them are completely autonomous and do not require plumbing and complex sewerage facilities. Some of them are easy enough to buy in the store. Others need to be built on the site according to established rules.

The toilet in the country sheathed with siding looks very good

Toilets are of the following types:

• an ordinary toilet with a pit for excrement looks like a cubicle installed above a pit, at least 1.5 m deep. The cubicle is made of any material from boards to plastic. The surface of the walls and bottom of the septic tank is reinforced to prevent collapse. Impurities are removed as needed. The seating place is arranged in the form of a chair or simply a hole is made in the floor;

The toilet in the country can look very original

• closet powder. This type differs from the previous one in the absence of any depressions in the ground. Instead, any suitable container is installed under the seat. At the end of each use, excrement is abundantly sprinkled with peat or ordinary ash. The process is similar to powdering. Hence the name. The tank has a vent going outside. As it fills up, the contents are taken out to the compost pit, where, thanks to the peat mixture, it is processed into an excellent organic fertilizer;

Neat toilet from a planed board

• a backlash-closet type toilet can be arranged right in the house, near the outer wall. The pit should partially go under the house in this place and have a slope outward. All internal surfaces of the septic tank must be completely sealed. The toilet is directly connected to the pit using a sewer pipe of short length. Outside there is a hatch for pumping out the contents. This option can be arranged in places where it is possible to organize the removal of waste on a sewage truck;

Toilet in the form of a huge stump

• a dry closet is an industrially manufactured device equipped with an airtight bucket with a seat on top. Excrement in it is neutralized with the help of bioreagents that are poured inside;

Wooden shingle toilet

• in a chemical toilet, unlike the previous one, chemicals are used to decompose waste, which does not allow them to be used as fertilizers in the future on their land;

Outdoor toilet in japanese style

• a peat toilet combines the features of a dry closet and a powder closet. It looks like a toilet equipped with a peat container. Each time, instead of water, peat pours out of the tank. Waste accumulates in a bucket and can be used as fertilizer.

Wooden toilet in the country with a pitched roof

Any of these species has the right to exist. However, most summer residents dig a hole and build an ordinary do-it-yourself toilet in the country. Drawings, dimensions of the entire structure and installation site must be determined in advance.

Useful advice! Excrement, processed with the help of natural bio-components, is an excellent fertilizer. They must be disposed of in a compost pit for further use in your summer cottage.

The color of the wooden toilet can be in harmony with the surrounding landscape

Finding the best place on the site for building a toilet

Before you start building do-it-yourself toilet in the country need to decide on a location. This is very important, since groundwater and surface water flows can carry sewage over a wide area. There are several generally accepted rules:

• the distance from the sewage pit to any water source: wells or wells, rivers or streams is supposed to be at least 25 m. At the same time, one should not forget about neighboring sources. If there are elevation differences on the site, then the toilet is built at the lowest point;
• basements or cellar must be located at a distance of more than 12 m;
• bath or sauna - more than 8 m;

• outbuildings with pets - 4 m;
• trees - 4 m, and shrubs - 1 m;
• at least 1 m from the border of the site;
• groundwater level is an important argument in choosing the type of toilet. If they rise above the level of 2.5 m, then it is unacceptable to build a toilet with an uninsulated cesspool. In this case, you must choose one of the alternative options;
• the door of the booth should not open towards the neighboring area.

Toilet in the country from unedged boards

It is also necessary to take into account the objects of neighbors when choosing a place for building a toilet in the country with your own hands. Drawings, dimensions and orientation of the building - everything must be taken into account. If the site is designed in a single design style, then when choosing the location of the toilet, its integration into the overall concept of the project is of no small importance.

Useful advice! When building a toilet in a summer cottage, it is always necessary to take into account the prevailing winds in the area. Installing this object on the leeward side can spoil the whole outdoor recreation due to an unpleasant smell spreading towards residential buildings.

If, as a result of all the thoughts and calculations, it is decided to build a toilet with a cesspool, then this must be done in a certain sequence.

Insulated toilet on a concrete base with a metal door

1. The optimal place is selected according to the above rules.
2. A hole is dug about 2 m deep with sides 1.2 - 1.4 m.
3. The walls of the pit can be laid out with bricks or strengthened in another way. At the bottom, you can arrange a cement screed. It is important that the liquid components of the waste should freely go into the ground.
4. A columnar foundation is made of bricks or concrete blocks. Skids are installed on it.
5. A frame is constructed from bars.
6. The frame is sheathed with boards, corrugated board or other material.
7. The roof is closed with any roofing material.
8. If necessary, the walls inside are insulated.

Wooden toilet located under tall trees

Detailed drawings, the dimensions of the toilet in the country with their own hands allow you to calculate the amount of material required and show the installation features of all elements:

• the frame is made of bars with dimensions of 100x50 mm. It is installed on two parallel beams with a section of 150x150 mm. They play the role of runners. Since the bars are in contact with the ground and directly with the pit, they must be treated with an antiseptic. If necessary, the toilet is insulated with foam. Shed roof covered with any material. It can be soft tiles left over from construction;

Country toilet frame

• the dimensions of the toilet must be on the drawings. Most often they are: height at least 2 m, width - at least 1.2;

Facade, plan and sectional view

• if the toilet is completely wooden, then all its walls are made of 100x50 mm boards. At the same time, the end wall has the shape of a rectangle, the side walls have the shape of a trapezoid, and in the front wall the doorway occupies most of it. It also makes a small window for ventilation and lighting. All finished walls are attached to the frame with nails;

Right wall of the country toilet

Left wall of the country toilet

Base, frames and truss system

• runners treated with an antiseptic are connected. For better rigidity, grooves are cut into them with a depth of 50 mm and a width of 150 mm;

The basis of the country toilet

• the floor is mounted from boards 50x100 mm and sewn up with OSB sheets. If necessary, it is insulated with foam. The cesspool is equipped in the back of the toilet;

Bottom overlap

• the frame of the door is made of bars 50x50 mm. For rigidity, the bars are connected diagonally. Outside, the door is sheathed with boards, and inside with OSB boards;

facade wall

• rafters for a shed sloping roof are made from a board 100x50 mm. and fastened with saws to the frame of the walls. The distance between adjacent rafters is 40 cm;

Rafters of the roof of the country toilet

• toilet wood can be treated with antiseptic compounds. Electrical wires can be drawn into it, which will make it possible to arrange lighting.

Table of required materials

Although building a toilet in the country is not a difficult task, special attention must be paid to the quality of work. Not only the usability of the object depends on this, but also its durability. The correct choice of the construction site will not only avoid troubles with the sanitary condition, but will also give a holistic and harmonious look to the entire site.

Do-it-yourself toilet for a summer residence, step by step instructions

On your personal plot, you can’t go anywhere without your toilet. You can build a toilet yourself if you take this matter more seriously.

The most difficult moment in the construction of this structure is digging a foundation pit. But even this work can be done.

One of the main processes in the work is by no means the aesthetic appearance of the toilet, but the creation of a solid foundation for the toilet and the construction of a cesspool.

It should be taken into account the fact that most summer residents do not equip the toilet, but completely manage with an ordinary bucket. But still, the waste should be disposed of somewhere and removed on the basis of this, a capital pit is simply necessary. It is better to once do the work on arranging your country toilet according to the necessary norms and rules, and enjoy the result.

But if the owner of the site does not want to spoil the appearance of his territory by arranging a standard toilet, then this building can be easily hidden from view in the farthest corner of the site. Therefore, in this article it is worth talking about how to make a country toilet with your own hands.

Choosing a place to build a toilet and its design

In most cases, a structure such as a toilet is built away from the country house itself. And this is no coincidence, since the unpleasant smell will be near him. But many people resort to other methods, equipping a foundation pit next to a residential building. And the area for the toilet is chosen in a free place at home, providing for the withdrawal of sewer communications into the pit.

This design is resorted to when water is supplied to a residential building, and in the future it is planned to install an insulated waste collection tank. In this case, it is always necessary to comply with the standards set by the sanitary services.

This is necessary, first of all, in order to create safety for the environment and for neighbors from the occurrence of negative consequences: all kinds of diseases, soil contamination.

• If the plans provide for the arrangement of an isolated container, then its installation is possible anywhere.
• If a septic tank is provided, then it must be installed at a distance of at least 20 m from the residential building.
• When arranging a cesspool, it should be located at some distance from the main water sources (30 m). In no case should its depth touch the groundwater.
• In most cases, the cesspool of the simplest toilet in its area is 1 sq.m. in the same case, if a round pit breaks out, then its total diameter should be 1 m. The depth of the pit directly depends on the occurrence of groundwater.
• After choosing a place for the pit, you need to decide on the design of the toilet itself.

Firstly, it should be remembered that the weight of the structure will depend on the material used for construction. This building should be light in weight.

This is necessary so that, under its weight, the soil does not begin to settle and does not deform the entire structure.

As a building material, it is best to use wood bars or boards or galvanized steel profiles and thin metal. You can also use corrugated board.

If it is decided to build a toilet from logs or bricks, then you should think about the maximum strengthening of the base of its foundation. But there is no point in erecting such heavy structures, since they still cannot provide the necessary heat.

If this option takes place, then it is possible to insulate the toilet with various heat-insulating materials that are lightweight. This building will turn out to be warm and light and will not be blown through in the winter, and in the summer it will be cool.

Secondly, it is important to determine the size of the future toilet. After the material has been selected, it is necessary to determine the overall dimensions of the toilet booth. The toilet most often has the following dimensions: height -2.5 m, and width 1 meter.

The length of the room itself is 1.4 / 1.5 m (depending on your requirements). It must be remembered that the room should be very comfortable.

What is needed for arranging a country toilet

From this article you can learn how to make a toilet in the country. After you have decided on the design and place for the toilet, you need to start buying the necessary building materials. You can also purchase a ready-made booth made of metal or wood. In the case of self-construction of the toilet, you will need the following materials:

• Wooden boards and bars.
• Fasteners (screws, nails).
• Metal reinforcements (corners for frame rigidity).
• Accessories (latch, handles and hooks).
• Roofing material (slate or corrugated sheets).
• Chair with cover.
• If you need to insulate the toilet, then you will need to purchase foam and wall insulation material (plywood or chipboard).
• In order to dig a hole you will need:
• Sand, cement and gravel.
• Reinforcement for strengthening the base of the foundation of the toilet.

Steel chain-link mesh, necessary for covering the pit and metal staples for fixing the mesh to the ground. Instead of a grid, you can use an ordinary brick, which covers all the walls in the pit.

In addition to everything else. In order to dig a hole, very often concrete rings are used, which have special holes in their walls. Most summer residents use large rubber tires for this purpose.

The most common option, and in turn environmentally friendly, is a ready-made container called a septic tank. They come in various sizes.

If necessary, you can purchase a container that is suitable for you. It depends, as a rule, on the number of people in your family and the time spent in the country.

Of course, when building a toilet in a summer cottage, you will need the following tools:

• Manual drill. He will help you dig the pit.
• Shovel (shovel or bayonet, having a short and long handle).
• In the event that the soil in the selected area is very clayey and rocky, then you will definitely need a perforator.
• Electric jigsaw.
• Marking tool - tape measure, ruler, pencil or marker.

Do-it-yourself cesspool arrangement

If you do not know how to make a toilet in the country with your own hands, then our tips and a useful video will help you. Of course, construction work should always begin with marking and digging a pit.

In the event that a plastic septic tank with 2 chambers is installed in the pit, then the digging of the pit is carried out so that the inlet of the septic tank is located exclusively in the cubicle of the toilet itself, since it is on it that the chair will be installed. And the neck of the second chamber of the septic tank should be outside the toilet. It is necessary for the constant pumping of human waste.

Septic tanks come in a variety of shapes. From this, as a rule, the size and shape of the pit will depend. The pit should be 25-30 m larger than the tanks, as the soil will be tightly compacted around them.

If the surface of the walls of the pit is finished with concrete mortar, or brick, then it can be made either square or round.

• After the hole is dug, drainage should be provided at its bottom. It should consist of large stones, rubble or brick fragments.
• Further, the walls should be covered with a chain-link mesh having 50 * 50 cells. The mesh is fastened by driving metal staples into the ground.
• To obtain strong walls, they must be reinforced with a steel grating with 100 * 100 cells.
• Then concrete mortar is poured onto the walls. It is left to dry completely.
• After the first layer of concrete mortar has completely hardened, all walls must be leveled and plastered.
• The pit is covered with a reinforced concrete slab. It will become the foundation for the toilet.
• Then wooden boards are laid on the pit. They should go beyond the boundaries by 750-800 mm. Boards are installed in the ground.
• There should be holes on the surface that are necessary for arranging the high chair and for the cesspool. Formwork must be installed around the holes.
• A dense PVC film must be laid on the entire surface of the foundation.
• A reinforcing grid should be laid on top of the film. In the future, it will be included in the formwork over the entire area of ​​​​the foundation.
• The height of the hole formwork must be equal to the height of the foundation formwork.
• Next, you need to prepare a concrete solution and fill it with our site. After that, everything should be left until completely solidified.
• After the site has dried, a toilet booth must be installed on its surface. A hatch is installed on the hole that will pump out the waste. This item can be bought in a store or made by yourself.
• You can also dig a round hole, which will be equipped with rubber tires. But one should take into account the fact that this type of cesspool, unfortunately, is not suitable for frequent use. Such a toilet can only be used in a summer cottage, in case of arrival of residents for a short stay or on weekends.
• To equip a cesspool of this type, it is necessary to dig a round pit 170/200 mm larger than the diameter of the tires. At the bottom of the pit, drainage should be laid with a thickness of 17-20 cm.
• Next, in the middle of the pit, you need to lay tires. They are stacked on top of each other to the surface of the soil.
• As the tires are laid around them, the drainage, consisting of sand and gravel, should be covered and compacted. This procedure must be carried out to the surface of the soil.
• After all the tires are laid, it is necessary to equip the strip foundation around the entire pit. To carry out this work, a shallow trench (500m) breaks out along the perimeter of the future structure, subsequently a concrete solution will be poured into it. Further, the bottom of the trench must be compacted and covered with sand (50/65 mm). It also needs to be covered with a layer of rubble.
• Then waterproofing should be laid, consisting of a dense PVC film.

We build a toilet in the country with our own hands, video:

• Install metal reinforcement, install formwork with a height of -100/150 mm. Then pour concrete.
• Make the arrangement of the foundation of brick and plaster with cement. After the mortar has hardened, the formwork should be removed from the cement foundation, and the brick foundation should be leveled. It is necessary to lay a sheet of roofing material on the surface of the foundation. He will be able to separate the wooden surface from the concrete. On the foundation, you can install a ready-made toilet booth, or made it yourself.
• In order to make it more convenient for you to do this work, the foundation must first be fixed to the foundation - the frame, which is made of thick wooden blocks. Further, the remaining structural elements will be installed on it.

It is worth talking about another method of arranging a cesspool - by using steel barrels without a bottom. The installation of these containers occurs in the same way as the installation of tires. Around them, the area is also compacted with gravel and sand. At first glance, it may seem to you that this method is quite simple. But unfortunately, it has a lot of shortcomings.

Barrels made of metal under the influence of an aggressive environment very quickly corrode, which will lead to their destruction. Such a toilet will serve you, alas, not for long.

How to build a house for a toilet in the country

After the platform for installing the toilet and the pit are ready, you should proceed with the installation of the house. To do this, you need to prepare a scheme in advance. Houses for the toilet can be of various shapes.

They may even look like a small fairy-tale hut. On our photos posted on the site, you see a house made of wooden logs. They just give the toilet a beautiful decorative look.

In this diagram, we have presented the basis for building a log house, but in this case, boards will be used instead of logs. On the diagram you can see how to assemble the walls and raise the roof slopes.

Next, it is necessary to make a roof sheathing, install a roof, and sheathe the walls with material (metal or wood). This house is installed directly on the cesspool or used as a room for a dry closet.

How to make a toilet in the country with your own hands, drawings of the simplest

There is another option for arranging the toilet. It's called "Shalash". In this case, the house looks like a triangle, and its walls act as a roof. This form is pretty simple. Building such a house will be easy and simple. It is also quite comfortable and spacious.

On the posted photo you can see its internal structure, the location of the high chair and the method of lathing the walls - the roof. Such a house can be installed on a cesspool. and also apply as a room for a dry closet. This form of toilet is the most common. It can often be seen in suburban areas and can be easily decorated.

Suppose a toilet in a summer cottage needs to be made in the Japanese style. This can be indicated by Japanese characters written on a wooden tablet, or a flashlight hanging on chains near the entrance to the house. Also, its interior design can tell about the Japanese style.

You can see an approximate scheme for the construction of this type of toilet in this figure. It shows the installation of a cesspool, as well as the installation of a cleaning hatch and the installation of a toilet structure.

This building is quite simple. It is easy to make it, but to give it strength, it is necessary to ensure maximum rigidity of the ligaments of all parts with each other.

The area inside the toilet at the time of the construction of the walls looks like this - on the base of the foundation, the foundation bars are installed, on which the frame of this structure will be fixed in the future.

Then you should do the installation of roofs and wall cladding. Only after completing this work is it necessary to install a high chair.

After all the interior finishing work is completed, the room looks like this. you can also come up with any other design for your toilet. But finishing inside it should still be done with the help of warm materials.

Toilet for giving Teremok - how to do it yourself, where to buy, ideas for a toilet

The toilet for giving the "Teremok" type has an original look and is able not only to serve correctly for certain purposes, but also to diversify the appearance of the cottage. This form of toilet can be used for containers with peat, chemical fillers or a conventional cesspool.

toilet Teremok

The advantages of this design include:

1. The shape of the roof eliminates leakage and accumulation of snow, which makes it easier to use and increases the life of the structure.
2. The shape of the design provides protection from the wind.
3. Such a toilet has an attractive appearance and can decorate a cottage.
4. Low cost and the possibility of using improvised materials.
5. Inside is larger than outside: the design does not take up much space, however, a person will feel more spacious and comfortable than in a rectangular type toilet.

The form is also a disadvantage. It may not be convenient for absolutely everyone, there are exceptions. When constructing this structure, precise observance of geometry is required, which complicates the construction process. This form requires a door with a rounding at the top, which also complicates the construction of this design.

Toilet Teremok

How to make a toilet-teremok in the country

Drawing and dimensions

The length of the roof sheet is almost two meters, the width of the toilet is one and a half meters, and the height is three meters. Of these, one hundred and thirty centimeters is the frame, the rest is the roof. The depth of the structure is one meter ten centimeters, the depth of the roof sheet is almost one and a half meters.

The bench inside the structure has the depth of an ordinary desk and a width of almost one and a half meters.

Drawing and dimensions

Construction stages

Construction tools

For the construction of this design, you will need timber, boards, material for the roof. In addition, you need a varnish for the final coating of the structure, door fittings. If desired, you can put a special country toilet.

Interesting flowerbed design ideas in the country

From the tools you will need an electric jigsaw, saw, hammer, long nails, bricks, brick chips, crushed stone, cement and tape measure.

Step-by-step instruction

1. A foundation is required. Its dimensions should not be less than one and a half meters by two meters. The base is twenty centimeters, the depth and width parameters are equal to one quarter of a meter. The bottom of the foundation should remain sandy. The foundation can be covered with construction waste, for example, broken bricks or rubble. Then pour cement.

   Inside the foundation you need a hole at least eighty centimeters deep. The plinth is lined with one layer of brick, the pit is lined with one fourth of the brick.

2. Wood for construction must be prepared in advance. You can take round blanks and grind them to the required parameters. For the frame, you will need two beams one and a half meters long.

   For the stability of the structure, the beam must be at least ten centimeters thick and have a square section.

3. For the floor, you can take the same bars. The width of the floor should be sixty-five centimeters. On the one hand, the floor is polished, on the other hand, it is processed by automotive processing. And placed on the frame.

   If there are no inconsistencies, you can fix.

4. The frame will require the same bars, one and a half meters long. They will need four pieces and the same number of two meters. The latter will be needed as rafters. All parts must be laid out according to the drawing and fixed.
5. In the form of frames, you need to put the front and rear parts of the frame.

   Fixed temporarily with nails. After another reconciliation with the dimensions, you need to attach the frame to the floor. It is attached to brackets. The beam located in the front must be sewn with nails twenty centimeters long.

6. Then you can install the front part of the frame, in which the door is installed.

   This part can be made of a bar with a section of five by ten centimeters. The door can be standard, almost two meters by almost a meter. Joints are fixed using threaded studs. Holes should be drilled obliquely so that they pass through the rafters and the rack.

7. The roof can be fixed by nailing boards to the rafters. First of all, the bottom board is fixed, then the top one. After that, everything else.
8. Guides inside the toilet are attached using self-tapping screws. A board is laid on them, which will serve as a shelf for sitting. A hole is cut using a jigsaw.
9. After all work, you need to cover the structure with varnish.
10. The final step is to secure the door hinges and handles.

We make a decorative well in the country with our own hands

Ideas for a toilet in the country

This design is necessary for any cottage. In addition, this is the first structure erected on the territory. After all, it is difficult to overestimate the presence of such convenience.

The toilet can also be made from improvised materials, for example, old brick, lining, slate and tiles.

This design can also be treated with humor, arranging the appearance according to the type of decoration. For example, a chic carriage, if it fits into the design of the dacha. Someone equips it like a house, you can use films for inspiration. The hut on chicken legs also fits perfectly into the country design.

Do-it-yourself country toilet, device and construction of a country toilet, optimal dimensions, drawings and photos

A dacha is a place not only for physical, but also for aesthetic relaxation. Everything here should look beautiful and reliable, including such an unsightly place as a toilet at first glance.

It’s good if the cabin for natural needs is inside the house and connected to the central sewer, but what if you only have an old wooden utility block at your disposal? Well, it can be rebuilt, making it a real attraction.

To build a country toilet with your own hands, you will need a drawing, tools and a positive attitude to work. We will tell about the rest.

We build a country toilet with our own hands, optimal dimensions, drawing up drawings

The country toilet project includes size calculations and design selection, as well as studies related to the location of the utility block and the depth of the cesspool. According to current regulations, the closet should be at a distance of 30 meters from the nearest source of water and no closer than 15 meters from the house. It is desirable that there are no trees above the cabin.

Before you start building a country toilet, you need to decide on its design. The most popular is the classic house with a cesspool underneath. On average, the depth of the septic tank should not exceed 1.5 meters, and the diameter should not exceed 2.5 m. If the groundwater is close to the surface, then this option will not work. In this case, the ideal solution would be a peat toilet.

Edged boards are often used as a material for a summer closet. Meanwhile, it will be possible to build a beautiful and functional odorless country toilet from timber, plywood, and also brick. As ventilation, you can use a steel or plastic pipe. To seal the septic tank, a concrete ring, which is used in the construction of wells, cement mortar and sand, is suitable.

We complete the creation of the project with the design of the scheme. Numerous country toilet drawings that can be found on the Internet give the following booth parameters:

• length - 1000-1500 mm;
• width - 1000 mm;
• height - 2100 mm.

The height of the door, as in any room, is 1800-1900 mm. Frosted glass can be inserted into it or in place of the pediment, which will let in sunlight during the day.

How to build a country toilet, pour the foundation, build a frame

To build a dacha hozblok, according to the scheme of the dacha toilet, make markings on the prepared site.

In the corners, dig holes 300-500 mm deep, pour sand on the bottom, and put a reinforcing mesh on top and pour in the concrete mixture.

The final layer of four sand-concrete pies will be stone blocks on which sheets of roofing material must be laid. The foundation is ready, you can go directly to the device of the country toilet.

The next step in the theory of how to build a country toilet with your own hands is the arrangement of a cesspool. Dig a hole 1000 mm deep directly under the booth. Lay the concrete ring in the resulting recess, fit it in the center and fill it with sand around the perimeter to fix it. Fill the bottom with a layer of concrete mortar.

Lay the cut-to-size bars with pre-cut grooves on the blocks and use them to make the lower harness. Next, fix the logs for the future floor and vertical racks. Reinforce them with horizontal bars and roof ties. Complete the construction of the frame by laying the roof rafters.

In order for the drawing of the country toilet to materialize completely, it remains to sheathe the booth. Fasten boards or sheets of plywood to the frame, sheathe the rafters with wood from above.

Lay the floor inside and arrange a wooden toilet bowl. Place a roofing material over the roofing base, and slate sheets on it. Fill door and window openings, remove ventilation.

We suggest looking at the original photos of country toilets in our gallery.

Building a toilet with your own hands is not a difficult task. You need tools, a blueprint, and a positive attitude. First of all, it is necessary to make a calculation of the dimensions and choose a design, as well as explore the location for the economic unit and the depth of the cesspool.

When building a toilet with your own hands, you can use a ready-made scheme for a country toilet. The closet, according to the law, must be located at a distance of at least 15 meters from your home. Trees should not grow under it. Groundwater should not be close to the surface.

As a material, a cut board is usually used.

So, after we have decided on the design of the toilet for the dacha, and with the fact that the cesspool meets the standards, we determine the depth of the pit. It should be 1.5 meters, and 2.5 meters in diameter.

If, nevertheless, a cesspool that meets the requirements is not possible, then it is better to use a peat toilet. A beautiful country toilet, functional and without unnecessary odors, can be made of brick, plywood, timber.

We use plastic or steel pipe as ventilation. We use a concrete ring as a seal.

How to make a garden toilet? To begin with, we draw up a project scheme, i.e. we create a unique drawing that will meet all your needs. The optimal size of the toilet cabin: width - 1 meter, height - 2 meters, length - 1.5 meters. As in any room, the height of the door should be 1800 mm.

Matte-coated glass can be mounted in the door, and it will perfectly transmit light. According to the scheme, we make markings on the site, which we prepared in advance. We dig holes in the corners, the depth of which is 500 mm, pour sand on the bottom, put a reinforcing mesh on top and pour concrete mortar. The result will be blocks of stone on which we lay the roofing material.

Everything, we have the foundation, we can continue to implement the project, how to build a toilet. See the video for more details:

You can also build beautiful country toilets according to the selected photo. When the cesspool and the foundation are already ready, the concrete ring is laid, filled with concrete mixture, and the blocks are laid, we lay the bars with grooves and make the lower garter. We fix the logs and vertical racks.

We strengthen them with crossbars. We complete the stage by erecting the frame of the toilet. We do roofing rafters. In order for the drawing to become a reality, it is necessary to sheathe the cabin. We fix sheets of plywood or boards on the frame and sheathe them with wood. We cover the floor inside.

We equip the toilet by putting roofing material, and slate on it.

One may be the most important building on our site is a wooden toilet for summer cottages. We comply with all GOSTs and standards when choosing a place for construction. In our opinion, the easiest and cheapest way to make a hole is to use car tires.

However, a brick pit will be a more reliable and durable option, but you will have to work hard to create it. To avoid odors from the toilet bowl and bacteria, you do not need to pour household water with detergents into it, as this disrupts natural recycling.

It will be very warm and dry in a wooden toilet if you finish the walls of the wooden toilet with foam plastic, and build a window on the street under the gable and small sizes. We make ventilation from a separately mounted pipe that goes up to the roof, about a meter.

If you are interested in a country toilet, you can look at the drawing with dimensions in the photo.

If you do not have the opportunity or desire to organize a drain pit, we offer the best project for a country toilet - powder - closet. The bottom line is that under the toilet house and an impromptu toilet we install a collecting container for dumping sewage (a box, a tub, a bucket, etc.).

A trip to the toilet each time ends with a dusting of sewage with ash, peat, dry sand, crumbling needles, etc. Consumption per day per person - one kilogram of peat or two kilograms of land. As the box fills up, the contents are thrown into the compost pits.

The advantages are very obvious: no waste in the life cycle, no need to suffer with a cesspool, removal, the complete absence of smell and flies, and plus an excellent raw material for fertilizing the garden. The optimal dimensions of the toilet in the drawing.

The outdoor toilet for our dacha is a rather banal building, and for its construction you need to follow certain requirements. The building site should be located at a great distance from housing, as well as water sources, and, of course, far from neighbors' houses.

All this must be discussed with your gardening partnership. But you don’t need to get too hung up on all these rules, measure is good in everything, because otherwise you will have to run far in bad weather. By the type of construction, they are also different: a brick toilet, a hut toilet, a wooden toilet, a utility block with a toilet, etc.

It is also possible to install a finished plastic structure.

The dream of a city dweller is to buy a country house where you can relax from the hustle and bustle. Well, now you are the owner of the site and the most requested part is the toilet. What if it doesn't exist?

But there is a way out - to build a toilet with your own hands, using improvised means, by creating a drawing yourself. With your own hands to provide comfortable living conditions.

How to make a toilet in the country?

A string of questions immediately arise in my head, which drawing to choose, which design to give, what materials will go. In this article, we will reveal the basis and rules for developing your project.

The main types of booths

First, let's look at what types of structures exist. The simplest type, a building with a cesspool.

But before we start, we take into account the sanitary standards that apply in Russia: think over the method of cleaning, proper waterproofing. Clarify the requirements of the neighbors so that there are no conflict situations.

A toilet in the country with your own hands can be made in several ways.

We list the types of buildings:

• The birdhouse is an economical version with a shed roof located on a box. Summer option;
• The hut is a complex structure with a large selection of designs that retains heat in the cold. Requires more material costs;
• Hut - a simple form with a gable roof, a wind-resistant model;
• House - a design with increased strength, a warm option;
• Double - a complex building with a second department;
• Toilet with shower - an additional extension for washing is attached to the main booth;
• Dry closet - can be installed even inside the house. Dry closets are gaining popularity, as there is no particular fuss with them.

There are three types of dry closets: peat, chemical and electrical models. This option is first aid when construction is underway.

Then you can proceed to the capital toilet with a reliable septic tank, serving for years.

Where to start building?

The summer resident needs a toilet that is hygienic, clean and pleasing to the eye, in compliance with the environmental situation, waste neutralization, and compliance with the requirements for external design.

Capital septic tank with a complex of tanks in the ground

To do this, most often they make three concrete rings, which are immersed in the ground in turn. The upper ones become settling tanks, the third filters sewage that goes into the ground without harming groundwater.

Such septic tanks contain anaerobic bacteria that process waste and neutralize harmful bacteria.

You have the following tasks:

• choose a system for the removal, discharge and disposal of sewage;
• determine a place for the toilet and it is better to choose far from home;
• decide what type of construction is suitable, dismantled above;
• choose a design that you can do with your own hands;
• select suitable materials;
• determine the size of the toilet in the country;
• calculate the construction cost estimate.

Decide for yourself how the waste pit will be cleaned if you do not install a septic tank. How can a sewage truck drive up, pumping out sewage.

Decided and answered questions? Now you can start building, let's take it step by step.

Practice: start of construction

We decided on the place, we will choose the desired design. The builders have already developed a certain gold standard of size, the ratio: 2.2x1x1.4 m.

Look at the photo of the country toilet. We decided on the form, we will prepare the necessary tool:

Note!

• perforator, can be replaced with a crowbar, for crushing hard ground;
• a shovel, preferably with a short handle, it is so convenient to dig;
• capacity for a pit with waste, the optimal capacity is 200 l;

If you use electrical appliances, take care of the power source.

Make drawings of a country toilet or use the data in the figure. Consider installing ventilation, insulation. Let's start construction with a waste pit.

Stage one - hole

We dig a deep waste pit for sewage. The standard shape is square, the depth is not less than 2 m. Be sure to strengthen the walls after digging, you can use reinforced concrete material, boards or make masonry from stone, brick.

We provide the bottom of the pit with tightness, fill it with rubble or make a concrete screed.

If there is a risk of contaminating groundwater, then we will make the walls and the bottom waterproof, seal it with a special material.

Note!

The second stage - the frame

The pit has been prepared, we will begin to build a protective external structure. The prepared frame must be fixed, it is better to make it wooden. We will make markings and drill holes in which we install the supporting pillars. They will provide stability for future construction.

The foundation itself is necessary if you visit the country house all year round, to serve for a long time. First, it must be deepened, then bricks or blocks should be placed in the corners, waterproofing will be provided by a roofing material overlay.

Place the material between the prepared frame and the foundation. Immediately begin to install the bottom frame so that the roofing material does not dry out from the sun.

Lay the floor, prepare the seat skeleton in place and attach it. Nail the front frame to the posts. After sheathe the toilet seat, make a hole.

Now sheathe the facade of the toilet directly, you can choose lining, profiled sheet, siding and other materials for this. Install the crate for the roof and put on it any roof made of slate, metal tiles.

Note!

Finish up by hanging the door on the hinges and the wooden outdoor toilet is almost ready.

The third stage - ventilation

So that unpleasant odors do not bother you, we will develop a ventilation system in the design of the toilet. We use a plastic pipe with a diameter of 100 mm for this.

Take tin clamps and pull it to the hole made on the roof of the building. The lower end of the pipe must be drawn 15 cm into the waste pit, cutting a hole of the required diameter into the seat.

A deflector nozzle will additionally help to strengthen the draft. There is nothing complicated in the construction, anyone can build a simple toilet.

DIY toilet photo

One of the main buildings that are located on a suburban area is a toilet. If the owner of the cottage is often on the site, then it will not be possible to do without such a structure. How to build a toilet in the country with our own hands, we will analyze in our article.

It is quite possible to build such a structure on your own, but you will have to make a little effort and spend your time. The most difficult stage in the design of such a structure, many consider the digging of a drain pit and its arrangement. After all, it is necessary that the toilet cubicle stands on a solid foundation and does not fail along with the person.

Choosing the best place to build a toilet

To construct such a building as a toilet, you first need to choose a suitable place and choose the type of structure. When choosing a space to create a structure, it is advisable to take into account the convenience of approach and sanitary standards.

As an alternative, but more time-consuming option, this is

The landscape of the territory will help to choose a suitable place for organizing construction. If the site is hilly, then it is better to dig a drain for building on the lowest point. Thus, the foundation of the house and the well will be located above the toilet, and it will not pollute the drinking water and the basement of the house. The sewer pit, as everyone knows, greatly affects the quality of water and land. For this reason, it is recommended to install storage tanks in the pits that are airtight and do not let sewage through.

Organization of a cesspool

If you need to build such a structure as a toilet in the country with your own hands, an instruction, a drawing with dimensions, will help you organize this work. Often the sewer for such a structure is a storage tank. It is quite easy to construct such a system. But first you need to choose the right size and location. If you make a mistake, sewage will poison not only the soil, but the very life of the owner of the site.

During the start of work, a lot of questions often arise on the topic of how to make a toilet in the country with your own hands, a drawing, and what is the best way to dig a hole? To do this, you can use a shovel or hire the services of an excavator. But this is not important, but the subsequent finishing of the drain. Many materials are used to construct pits. The service life of the finished structure depends on the correct choice of manufacturing technology.

You need to know that sewer pits can be accumulative and filtering. Accumulative need frequent pumping, and filter pollute the soil. In principle, pits with an insufficient tightness indicator are prohibited, but they are still constructed in suburban areas.

Do-it-yourself toilet pits in the country are constructed from:

• bricks;
• plastic tank;

To construct such a system from the selected material, it is necessary to dig a hole, it is better to do this with a shovel. The volume of this design is not large, but with the help of a shovel it will be even. Thus, the process of laying bricks is facilitated. During this procedure, it is worth considering the parameters of the brick, and the waterproofing layer. It is better to dig 20 cm wider and deeper than you need.

When a pit for a toilet in a country house is dug with your own hands, it must be equipped. The bottom must be compacted, covered with a layer of sand of 15 cm and also compacted tightly. Then, broken brick and reinforcing mesh are laid on the bottom area. And they are poured with concrete, also with a layer of 15 cm. If the bottom is of the filter type, then a crushed stone layer is poured onto the sand layer.

For laying bricks, it is necessary to fill the foundation around the perimeter. Finishing the walls of the sewer drain for the toilet in the country house with your own hands is carried out on half a brick. For this type of finish, it is recommended to use a silicate type brick, red is a more suitable option. A do-it-yourself pit for a toilet in the country house made of cinder block will last longer. After the masonry is completed, if it is decided that the pit will be airtight, then it is necessary to fill the gaps and seams with mortar or mastic, and then cover it.

If there are dimensions and a drawing of the toilet in the country with your own hands, you can organize the overlap in this way:

• To construct a floor slab, you must first fill the voids between the masonry and the ground with soil. During such a manipulation, it is desirable to leave a distance of 20 cm to the top of the structure, during this gap, it is necessary to pour concrete, which will act as a reinforcement under the ceiling.
• To prevent concrete from falling into the pit, it must be covered with sheets of metal or tin, but to ensure that the sheet does not bend, supports are installed in the pit. The solution itself is made from cement and sand. It is advisable to take cement grade 400. The batch is done in a ratio of 1 to 3, namely 1 cement and 3 sand. If there is crushed stone, then it is better to add it, as the quality of the solution improves and it becomes more reliable. The slab is cast in one piece.

To make the slab more reliable, the site is reinforced and only then it is poured. To make a toilet in the country with your own hands, drawings will help you.

When designing a drain pit for a toilet in a country house with your own hands, an instruction, a drawing with dimensions must be required, especially if plastic is used. It is important to consider that you need to dig such a hole a little larger, about twenty centimeters on each side. Filling the bottom is carried out according to the same principle as in brick pits. But even during the reinforcement under the floor slab, it is necessary to make 2 loops. A tank will be attached to them in the future.

After the concrete has completely hardened, a container is lowered into the pit and tied to loops that will prevent the light material from floating to the surface under the influence of groundwater. Now you need to fill the voids between the pit and the tank itself with earth. It would be ideal if the voids are filled with a mixture of sand and cement.

Building a toilet cubicle with your own hands

Today, modern natural-use installations look different than the designs used in the past. Do-it-yourself drawings will help everyone, even an inexperienced builder, to make a toilet in the country with their own hands.

But before starting the design, it is necessary to solve problems, by choosing a drain system, determine the location of the cubicle, choose the type of toilet and deal with the decorative design.

When the required site is selected, it is necessary to decide which type is more suitable for the requirements. Such buildings are constructed from brick and wood. Of the materials you must have:

• timber 100x50 and 50x50;
• insulating materials;
• lining;
• door, canopies, latch and similar fittings;
• roofing material.

From the tools you need:

• shovel;
• a hammer;
• screwdriver or bit for a drill;
• drill, electric jigsaw or hacksaw.

Natural ventilation. This ventilation is based on a natural process. Warm air is lighter and rises, while cold air sinks to the bottom. To organize such ventilation, you need to construct a hole in the upper part of the booth.

• Forced ventilation. The removal of unpleasant odors in this case takes place with the help of a device that creates artificial traction.

Which ventilation system is more suitable for the owner of the cottage is up to him to decide. All types have their advantages and disadvantages, and it is desirable to take them into account before the design begins. If you need to save money, then the natural look of the hoods is ideal. But in this case, it is necessary to correctly calculate the data and organize it in compliance with the rules and regulations. Such a system is in many ways inferior to forced ventilation.

The main advantages of forced ventilation:

• quality traction;
• uniform drawing power;
• the same efficiency.

Note the fact that if the pressure is low outside, natural ventilation practically does not work.

Ready-made toilet cubicles in the country

Among modern summer residents, the so-called standard options are popular. They look like miniature houses based on wood and stock containers. Recently, bio-type toilets have appeared. Having installed such a toilet, there is no need to create sewage pits, but it is still necessary to build a cubicle itself.

To make a toilet in the country with your own hands, the drawing is selected individually, of course, if the owner wants an exclusive design. The drawing should indicate what material is required for the construction process and how much is needed, the dimensions of the building, its location and other nuances.

If there is no desire to spend time building a toilet in the country with your own hands, an instruction, a drawing with dimensions in finished form is always useful in such situations.

In the case of a project, it is important not to forget the fact that the part of the toilet located in front must be higher than the wall located behind. During bad weather conditions, the water will flow back, and you will not drip on your head while entering the booth.

In a situation where the owner decides to make a wooden roofing, it is necessary to make all the calculations related to the organization of the wooden ceiling in the project and it is desirable to supplement it with the dimensions of the roofing material. Upon completion of the design, it is recommended to sum up the amount of material required and determine the total cost of the toilet.

Approximate scheme and design parameters for the work:

• the manufacture of the frame is carried out from a bar, and a board is also used;
• the finished building must have parameters: no more than two meters from the foundation in height, at least one and a half meters in width, you can find out the dimensions more accurately on a similar drawing;
• the parts located behind and in front of a rectangular shape, but the side parts are trapezoidal, due to which it is possible to achieve a slope for water flow during rain or snow melt;
• so that natural light enters the room and the booth is ventilated, a window is cut out in the upper part of the wall located on the side;
• over the sewer pit, the ceiling is organized from boards 5 cm thick and sheathed with sheet wooden material;
• the overlap according to the presented drawing is installed on a base made of timber with a cross section of 150 by 150 mm and fixed with nails.
• to increase the strength of the connection, grooves and protrusions were made in advance on the boards;
• as indicated in the drawing, the doorway for such a design should have a height of up to two meters and a width of up to a meter, this element is made of edged boards and sheathed with OSB;
• fastening of doors is carried out by a vertically installed timber 150x150 mm;
• for the construction of the roof on the structure, rafters were installed, from boards 10 cm wide and 5 cm thick, at a distance of 40 cm from each other.
• to carry out high-quality fixation of the material used, nails are used, and profile-type sheets can be placed as a coating on top.

If you take a ready-made plan to design your building according to it, then all notes can be modified according to the preference of the owner.

If the toilet is made of wooden material, then when changing the dimensions on the finished plan, strict proportionality must be observed. In this case, more materials will be required and the cost of construction will increase.

Video instruction

With a little imagination and perseverance in the process of creating a scheme, you can create not a simple toilet on the territory, but an original and spectacular addition to the entire site that can decorate it. To understand clearly what technology is used to create a toilet, check out the video on this topic presented above.