DIY dressing table: how to make. DIY dressing table - a great gift for your sweetheart Make a dressing table from a computer desk

Every woman dreams of a small place where she can lay out all her accessories and cosmetics. It is not always possible to buy a ready-made dressing table. This is due to its high cost and not always suitable sizes. As for the individual order, it can be even more expensive. Therefore, it is more expedient to make a dressing table with your own hands. It's simple, the main thing is to devote enough time and think over its design. The design of the table should include a work surface, shelves, drawers and a mirror.

Dressing table dimensions.

Additionally, such a dressing table can be equipped with lamps. They can also be used as night lights if equipped with a dimming system.

In order to make a dressing table, you must use laminated chipboard. The color is chosen at your discretion. If desired, you can combine several colors. If possible, you can order parts, for this, provide the dimensions to the appropriate workshops, in which you will be cut out the necessary elements of the table. If this is not possible, you can deal with it yourself, at home. To do this, you need to acquire a special tool.

Tools you will need to make a table with your own hands:

Dressing table assembly diagram.

screwdriver, you can use a drill;
electric jigsaw;
roulette;
building corner, 30 cm long will be enough;
drills, required dimensions - 8 and 5 mm in diameter;
a screwdriver, it is very important to purchase a hexagonal model;
iron;
a pencil for basting, a hammer, you will also need sandpaper.

If the details of the table have been ordered, you can immediately start assembling. If this process is carried out independently, it is necessary to start with measurements and drawing contours on a chipboard sheet. It is very important to measure correctly and only then cut off. In order to make the dressing table perfect, it is better to take measurements several times.

For a dressing table, it will be enough to use a sheet thickness of 16 mm.

After all the details are cut out with a jigsaw, the ends must be cleaned with sandpaper. This should be done carefully so as not to damage the lamination.

Assembly accessories

The next step is assembly. Almost all cabinet furniture has the same fastener systems. They can be purchased at any hardware store in the hardware section. For a table with a shelf and drawers, you will need the following set of fittings:

General view of the dressing table.

confirmat size 5x70 mm, can be purchased with a margin;
self-tapping screws 4x16 mm in size;
self-tapping screws 4x25 mm in size;
for boxes it is necessary to purchase roller guides, the size and quantity depends on the size of the structure;
handles for drawers;
soft edging for ends;
melamine edge on an adhesive basis, it is recommended to take with a margin;
metal furniture corners;
mirror glue, mechanical fasteners can be used;
for handles it is necessary to pick up screws.

Features of the assembly process

If the design of the table involves curved lines, you should not rush during the sawing process. It is on how the parts are prepared that the appearance of the structure will depend.

Prepared parts must be processed from the front side. To do this, they need to be primed. This can be done using ordinary Moment glue. This technique will make the edges of the chipboard more durable.
After complete drying, you need to apply another layer of glue and put on the piping. Soft edging is used only on the top tabletop. To finish the ends that are not processed by edging, use a melamine edge.
In order to glue it, the ends also need to be cleaned. The melamine edge is glued with an ordinary iron. Having attached one end of the edge to the end, we smooth it with a well-heated iron (up to 3-4 power). The iron must be carried out from above several times until it is completely glued. Press well with a dry cloth. After cooling, cut off excess elements. It is very important to use a blunt object that will not damage the laminate. The edge is cleaned with fine sandpaper.
Finished parts can be assembled. In disassembled form, roller guides for boxes are installed. The assembly of the entire structure is carried out by confirmants. The base of the table is assembled first, then the department with drawers or cabinet. All departments are interconnected. During the assembly process, you should check with a building corner that the corners correspond to 90 degrees.
The final step is to install the mirror. Previously, it is fixed on the prepared chipboard part. A more reliable option for fixing are mechanical holders that are screwed into the base of the chipboard.
The whole structure with a mirror is attached under the tabletop. For additional strength, it is necessary to install guides that will hold the structure with a mirror. A properly installed mirror should not be movable.

For greater convenience in such a table, you can equip lamps with daylight. Making a dressing table with your own hands is quite realistic, the main thing is to follow the recommendations and be patient and attentive. And a table made with your own hands will delight your beloved woman.

How to make a dressing table with your own hands as a necessary piece of furniture and decoration, it is proposed to familiarize yourself with this article.

Despite the fact that the dressing table seems to be an optional item, in practice it is necessary. Some models turn into a shelf and are placed under the mirror not only in the bedroom, but also in the hallway or bathroom.

If desired and possible, a dressing table is quite simple to make with your own hands.

Many girls install a dressing table in their bedroom. Here you can not only store everything you need, but also use it as a wonderful decorative element. Such models are made in a variety of styles so that the owner can choose or make a product that best suits the general one.

The most popular dressing tables are those with a mirror. In the interior of the bedroom, the most common models are made in vintage, modern or classic style, which look very elegant.

For those who pay more attention to visual design, classic and vintage are suitable. These models have expressive, rather bright decorative features, which can be seen in the photo.

A simpler and more practical style is modern (see). Contrasting elements, even corners and small parts are attractive.

They may look like modern variants of a dressing table. For manufacturing, chipboard is used, into which plastic parts are inserted.

The criteria for choosing dressing tables are:

Each model is distinguished by its features, detailing and practicality, so you should pay attention to this. But the price of a finished comfortable table can be much higher than it was planned to spend on it, so many are interested in how to make a dressing table with their own hands.

Tip: Before you start creating an author's model, you should familiarize yourself with the nuances of how factory products are selected.

The design should be quite comfortable to use, but not take up a lot of space. The product is made compact and maximally capacious. This can be solved by installing additional sectors placed on both sides, in front of the mirror and under the table top.
With a large room, you can also install a three-dimensional structure with a sufficiently large mirror, which will be convenient and at the same time beautiful.
There is an option to mount the product with a suspended table structure. This model takes up less space and is a cheaper option.
After choosing a model, you can start making a dressing table.

Preparatory work

Before starting the assembly of the structure, it is necessary to develop its drawing, where all the dimensions necessary for manufacturing will be indicated. When a dressing table is made by hand, drawings and diagrams help in the work, which will help to avoid unforeseen errors and miscalculations.

Such documentation is developed independently. In this case, an individual furniture model is invented or a ready-made analogue is taken as a basis.

You can use your dimensions and change the entire design to suit your requirements. The dressing table is equipped with one or two bedside tables (see).

The necessary small items are removed in the drawers, and cosmetic accessories, a first-aid kit, and books are placed on the shelves. But you can redistribute storage space according to your own taste.

To carry out the work you will need tools:

Electric drill with a set of drills that are designed for woodworking.
Screwdriver with a set of necessary bits.
Electric jigsaw or hacksaw with small teeth.
Set with different bits of screwdrivers.
Hex keys.

It is necessary to prepare measuring tools:

Measuring tape.
Measuring line.
Metal or wooden square.
Building level.

Tip: You can not neglect the control of the installation of fasteners, otherwise the furniture may be deformed.

For marking you will need a regular pencil.

What materials are needed to make a table

During the preparatory work, you should decide on the location of the mirror. It can be part of a table or separately fixed to the wall. The easiest way is to use a ready-made mirror, which will allow you to avoid time-consuming and rather complicated work when installing it.

It is necessary to decide how the sections of the countertop will be decorated. Amateur craftsmen simply sand or putty them, and then cover them with paint. But these methods are not reliable enough.

Tip: For decoration, you should use a special edging furniture or end tape. To install it, you will need an iron or a low power building hair dryer.

For the manufacture of countertops of an unusual shape, it is easier to contact a specialized carpentry workshop.

When making a model, you must:

Make a life-size pattern of the element from paper or cardboard.
Select accessories:

pens;
furniture hinges;
all kinds of awnings;
drawer guides. They can be roller or ball designs. The former are low cost. Ball guides are more reliable and easy to use.

To fix the elements, self-tapping screws, confirmations or eurobolts are used.

Method: For the reliability and durability of the nodes, all joints should be additionally glued with ordinary PVA glue.

For this method of fixing, you will need to use clamps to tighten the parts until they are completely dry.
Special plastic plugs covering the bolt heads improve the appearance of the product.
The table can be made from:

chipboard;
enough thick plywood, at least 16 millimeters thick;
solid carpentry, but in this case the furniture will have a more massive look.

How to assemble a dressing table

The dressing table is made in the following sequence:

The table is formed. First, you should paste over the surface of the sheet according to the applied markings with paper construction tape.
A cut is formed on top of it. This order will prevent the formation of chips, chips and excess chips.
The front edge of the cover is processed. It should be sanded with coarse-grained sanding paper rough, and then re-primed with glue. In this case, you can use the glue "Moment".
The primer must dry completely.
The surface is again smeared with glue.
The end edge is installed.
The tape is glued with an iron. In this case, the temperature of the iron should be set to "cotton".

Excess edges are cut off with a clerical knife.
Sections are cleaned.
Similarly, a rack for mounting a mirror is made out.
Sidewalls of cabinets cut in advance according to the dimensions are marked for installation of guides for drawers.

The boxes are laid out like this:

is taken, starting from the top, the serial number of the box;
multiplied by the height of the wall in centimeters;
the height of the edge for finishing is added, which is equal to 25 millimeters.

With a box height of approximately 140 centimeters, with an edge height of four millimeters, the calculation will look like this:

first box: 1 x 140 + 4 - 25 = 119 millimeters;
second box: 2 x 140 + 4 - 25 = 259 millimeters.

In this case, the guide or its center for the first drawer is fixed at a distance of 119 millimeters from the upper cut of the sidewall, and 259 millimeters for the second.

Dressing table drawers are assembled.
In the side blanks for the walls, holes are drilled in the plane, in the front and rear elements the same sockets are formed at the ends.
For fixing, wooden dowel or eurobolts are used.
Gather around the perimeter of the wall.
The bottom is attached to them, which can be made from a small thickness of plywood or hardboard.
From the outside, guides are fastened with self-tapping screws. When using roller structures, each side requires the installation of its own guides.

The final processing of the dressing table is in progress.

For this:

Cabinets are mounted.
To the side elements are connected transverse upper screeds or slats.
The bottom is fixed.
Before installing the screed, holes are formed in them to fix the table top.
Installed last:

table cover;
on drawer fronts;
accessories;
doors for storage of small items.

For dressing tables made of laminated board, this can be completed.

When using chipboard or plywood, the product needs a final finish.

For this:

All cuts and cuts are carefully sanded and polished.
Surfaces are covered with paint or stain.

Tip: When using paint, the table will look like it was assembled from precious wood, and stain can make the structure of the tree more pronounced.

Lacquer surface treatment helps to acquire furniture with a glossy sheen. Otherwise, the table will be matte.

How to make a dressing table with your own hands with drawings developed independently or by third parties, the video in this article will tell you.

You can't do without an elegant and comfortable dressing table in the bedroom. Otherwise, where does the hostess put cosmetics and necessary little things? And a large mirror is not a luxury, but a vital necessity. Of course, you can buy ready-made furniture assembled at the factory, or order the production of an exclusive model in a specialized workshop. And you can assemble an elegant, but simple table with your own hands. This will require quite a bit of time, perseverance and skills in handling carpentry tools.

Making a small dressing table is quite simple, you only need a few boards and carpentry tools.

Preparatory stage of work

Before you start assembling a table with your own hands, you need to create a drawing of it, indicating all the dimensions you need. Such a scheme will help in the work, and you can avoid annoying mistakes and miscalculations. You can make a similar drawing yourself by inventing your own model of furniture, or take a ready-made analogue as a sample. For example, a table diagram (Fig. 1) can be created from drawings from a well-known brand furniture catalog.

Of course, you can use your own dimensions and modify the design to suit your needs. Looks good dressing table, equipped with both one and two cabinets. You can put the necessary little things in the drawers, and put cosmetics, a first-aid kit and books on the shelves. But you can also redistribute storage space to your liking.

Figure 1. Drawing of a dressing table.

In any case, you will need the following tools to work:

an electric drill and a set of drills designed for woodworking;
screwdriver and a set of necessary bits;
jigsaw or hacksaw with small teeth;
a set of screwdrivers with different tips and hex keys.

Do not forget to prepare measuring tools: centimeter tape measure, ruler, square and building level. They will help you connect all the elements correctly. If you neglect to check the installation of fasteners, then the furniture may turn out to be deformed. For the necessary markup, use a regular pencil.

Necessary materials for the manufacture of the table

At the stage of preparatory work, it is worth deciding on the location of the mirror. It can be made as an element of a table or mounted on a wall. The easiest way is to use a ready-made mirror. Then you will avoid the time-consuming and rather complicated work of installing it.

You also need to decide how exactly you will decorate the slices of the countertop. Home craftsmen either simply sand them, or putty and paint them. But both of these methods are not very reliable. Experts advise using furniture edging tape (it is also called end tape). You can buy it in stores selling goods for the repair of interior items. And to install it, you will need an iron or a low-power building hair dryer.

Figure 2. Scheme of the dressing table top.

If you want to make a fantasy-shaped countertop, then it’s easier not to cut it out yourself, but to contact a carpentry workshop. In this case, it is necessary to make a life-size paper or cardboard surface pattern. The same service is provided in some stores selling chipboard and plywood. Specialists can help you choose the right shape for the table cover (Fig. 2).

The last thing to choose accessories. In addition to handles, you will need furniture hinges, awnings and drawer rails. You can choose roller or ball designs. The advantages of the former lie in the relatively low cost. Ball guides are more reliable and easier to use.

To fasten the elements, self-tapping screws and eurobolts (confirmates) are used. All nodes can become more reliable and durable if they are additionally glued with ordinary PVA glue. If you choose this method of fixation, then you will also need clamps to tighten the parts until they are completely dry. And to improve the appearance of the table, use special plastic plugs that close the bolt heads.

To make a table, you will need chipboard, chipboard or plywood thick enough (at least 16 mm thick). In addition, such a piece of furniture can be assembled from a solid carpentry board, but then the furniture will turn out to be much more massive.

Dressing table assembly

Figure 3. Dressing table assembly diagram.

When making a table with your own hands, you first need to form a table top. If you cut it yourself, then pre-paste the surface of the sheet according to the markup with construction paper tape. And then form a cut on top of it. This will allow you to get rid of chips, chips and excess chips.

Next, you need to process the front edge of the cover. It is ground with coarse-grained sanding paper and primed with glue (the standard Moment is suitable for this). The primer must be allowed to dry completely. Then you need to grease the surface again with glue and only then install the end edge.

Next, the tape must be glued with an iron. The temperature of the device must be set to "cotton". Never run a hot surface over the tape itself. Lay a clean cotton cloth between the iron and furniture. Excess edges are cut off with a clerical knife and the cuts are cleaned. The rack under the mirror is made in the same way.

Ordinal number of the drawer (starting from the top) x wall height + finishing edge height = 25 mm.

If your drawer is, for example, 140 cm high and the edge height is 4 mm, then the following calculation results:

1 box: 1x140 cm + 4 mm - 25 mm = 119 mm;
2 box: 2x140 cm + 4 mm - 25 mm = 259 mm.

Accordingly, the guide (its center) for 1 drawer is mounted at a distance of 119 mm from the upper cut of the sidewall, and the second - 259 mm. After fixing the guides, it is necessary to assemble the drawers of the table themselves. Pay attention to the scheme of work (Fig. 3).

In the side blanks of the walls, holes are drilled into the plane, in the front and rear parts the same sockets are formed into the end. Eurobolts or wooden dowels can be used as clamps. First, the walls are assembled along the perimeter, then the bottom is fixed on them. It can be made from thin plywood or hardboard. Then guides are attached from the outside with self-tapping screws. If you are using roller structures, then do not forget that each side has its own guide.

Table finishing

Next, cabinets are mounted. The upper transverse ties (slats) are attached to the side parts. Then the bottom is fixed. Before installing the screeds, form holes in them for attaching the countertop. Lastly, the table top, drawer fronts, fittings and doors for storage compartments are installed.

If you assembled a table from a laminated board, then this work can be completed.

In the case of chipboard or plywood, your product needs a final finish.

First of all, all cuts and cuts must be carefully sanded and sanded. Then the surfaces can be covered with stain or paint.

In the first case, you can make the tree structure more explicit. And if you use a tool with coloring pigments, then the table will look assembled from precious woods. If you want the furniture to acquire a glossy sheen, then varnish the surface. Otherwise, the table will remain matte. If desired, this piece of furniture can be painted.

Any woman needs a place where it will be convenient for her to put herself in order in the morning or get ready for bed. A makeup table with a mirror is a great solution to this problem. Harmoniously matched to the interior of the room in which it is located, it will bring comfort and become a favorite corner for restoring beauty or for spiritual relaxation.

Any woman needs a place where it will be convenient for her to put herself in order in the morning or get ready for bed.

Dressing table in a modern style has a good capacity, can be illuminated, with mirrors (from 1 to 3) or without them. By turning the flaps of the latter, it is very convenient to inspect makeup, jewelry or hair from all sides. A dressing table with a mirror is called a dressing table. He won the greatest popularity among the fair sex. A modern dressing table has irreplaceable elements: various drawers, shelves, caskets. They will fit the entire cosmetic and perfume assortment, so necessary for a woman.

In addition to its intended purpose, a piece of makeup furniture with large mirrors can visually expand the space of the room, and its original look will turn the room into a luxurious boudoir. Typically, a makeup table is placed in the bedroom, but it can often be placed in other places in the apartment, such as the hallway or bathroom. It all depends on the preferences of the hostess, on where it is most convenient for her to paint and take care of herself. It is better if it is a window seat, as the sunlight allows you to notice all the slightest nuances and create the most natural make-up. If the room is without windows, you will need to take care of additional lighting for the dressing table.

Probably, for any woman, having a place to store cosmetics is not as important as the process of creating her image. Therefore, the design of the dressing table is of no small importance. Nowadays, a large selection of products of different designs, colors and shapes is offered for sale. This allows you to satisfy the demand of the most demanding customers and choose a boudoir table for any style, be it modern or high-tech.

Classic-style options are perfectly combined with any interior space. Provence or vintage styles are suitable for small rooms. Particular attention can be paid to wrought iron dressing tables: they can be a great addition to any bedroom decor. A wrought iron piece of furniture looks like a light lacy construction and may include details inlaid with stones, which not only makes the piece itself original, but also decorates the room as a whole.

If the options on sale do not suit you in terms of size or price, it is quite possible to make a suitable dressing table with your own hands.

Gallery: makeup table with mirror (25 photos)

DIY make-up mirror with lighting (video)

Making your own makeup table

Special furniture for cosmetics is an optional element, but still necessary for every woman. Sometimes it is just a shelf under the mirror, but it is also a kind of mini-table for makeup. In the absence of the opportunity or desire to buy a finished product in a store, you need to assemble a dressing table with your own hands. The design of this piece of furniture is simple. This is the most common table, even optional with a mirror that can simply be mounted on the wall. Complicate the work only built-in drawers.

First you need to determine the location of the product, develop a project, taking into account the desired dimensions of the dressing table, and draw a diagram. Mark the number and dimensions of drawers and shelves, their attachment points. In this case, in the middle you need to leave enough free legroom. To make a stylish dressing table, you can show your imagination and add some original elements to the sketch. Then, according to the drawing, calculate the amount of necessary materials, fasteners and accessories that will need to be purchased at a specialized store.

The countertop can also be bought ready-made.

Assembly is carried out starting from the body: tabletop, side racks or legs and back wall. Then each box is collected separately. Roller guides are attached to the finished case and boxes are inserted. All side cuts must be processed with a piping and a special edge. After that, you can add various accessories and elements to your table: a mirror, LED strip, decorative inserts for doors, etc. Now you can install the finished furniture in the chosen place.

In order to get an excellent result, making a dressing table with your own hands, careful execution and strict adherence to the project are necessary. Various elements, especially for a simple model, are not difficult to make, but accuracy and patience are required when aligning and finishing the edges. And then a self-made original product will decorate the interior of your favorite room for a long time.

Dressing table (video)

Attention, only TODAY!

Dressing table made of handmade wood

Modern techniques, equipment and materials make it possible to create a unique dressing table with your own hands. By following simple instructions, even people with no experience can make a beautiful piece of furniture at minimal cost in a few days. Making a table with his own hands, the master can make furniture of the required size and functionality, colors and shapes, using materials that are safe for health and choosing a mirror that is convenient in shape.

An elegant dressing table in the bedroom is a necessary and practical piece of furniture.

A table of complex design with drawers, mirrors, cabinets, countertops of unusual shapes, shelves and other elements is harder to make than a simple neat table with four legs (the mirror is attached to the wall).

Stylish dressing table with a separate mirror on the wall

An example of a drawing of a dressing table with dimensions

The dressing table on legs is complemented with drawers from the bottom of the tabletop, a bookcase on the side, built-in and side drawers, folding mirrors, etc. Each additional element complicates the design and its manufacture.

White dressing table in modern style

Considering how to make a dressing table with your own hands, one of the prerequisites for obtaining a beautiful and functional product should be singled out separately - the creation of competent project documentation (a drawing indicating the exact dimensions up to millimeters, a list of necessary materials, accessories). Changes to the model should be made at the design stage.

DIY dressing table model

The scheme of creating a dressing table without a mirror in the bedroom with your own hands

The ease of execution of the dressing table depends on the materials that will be used in production. For example, natural wood products require a certain level of skill, and even a beginner can handle MDF, plywood or chipboard (many suppliers offer cutting material to size).

To make a dressing table of almost any model, you will need the following tools and materials.

Clamps are used to connect parts at right angles.

Elements for decorating the dressing table are selected individually depending on the style of the piece of furniture. You can make any decorating elements (patterns of hemp rope, beads, shells, beads, etc.)

Manufacturing process: step by step instructions

Figured shape of the table top of the dressing table with dimensions

A do-it-yourself dressing table can be made with and without a mirror (the mirror is bought and decorated separately, fixed directly on the wall). Beginning craftsmen are advised to make a model without a mirror. Making a dressing table with your own hands must be done in the following order:

We pre-drill the parts fastened with confirmations

frame assembly (tabletop, back wall, support posts / table legs are fixed with confirmations);

We tighten the sidewalls of the pedestal with confirmations with slats and a bottom

We assemble the module “panel with a mirror + shelf with supports”, fasten it from below, through the tabletop

If the project implies the presence of a door, it is required to drill a hole to fix the furniture canopy (fastened with screws). To achieve greater reliability and stability of the product, the craftsmen recommend additionally gluing each joint with a suitable adhesive, for example, PVA. To do this, before tightening the fasteners, the ends are smeared with glue.

Scheme of a dressing table with two cabinets for making your own hands

dressing table decoration

Beautiful handmade decoupage dressing table

More than half of the uniqueness of each handmade product consists of decor. Modern materials and decorative elements allow you to create a dressing table in any style.

A small dressing table perfectly complements the interior of the bedroom

The surface can be made plain or multi-colored, stained or painted, varnished or left matte. For example, when painting with ordinary acrylic paint, the surfaces take on the appearance of valuable wood species, and the use of stain shows a woody structure.

Unusual dressing table with decor and lighting

The dressing table can be decorated with any decorative elements (beads, paintings, beads, painting, etc.). You just need to choose the style, the appropriate decor details and a new unique piece of furniture, made by yourself, will decorate the women's boudoir.