Locksmith repairman. Job responsibilities. Production instruction for a repairman Admission to independent work

The locksmith profession is predominantly male. To obtain it, you do not need a higher education, a secondary special will be enough. Few enterprises, whose work depends on the serviceability of production equipment, can do without technical specialists, in particular, a mechanic to repair it.

This determines the advantages of this specialty: the presence of stable wages at the average level, or above it, the constant demand in the labor market. In addition, by improving his qualifications, a locksmith can achieve a better position, increasing the ranks at the beginning, and then becoming the head of the link.

List of duties performed

The nature of the tasks solved in the work process depends on the category of the employee and his specialization. So in plumbing, the level of qualification is indicated by the assigned category. It depends on the level of practical knowledge and experience. There are six of them in total, where the easiest tasks are performed by repairmen of the first category. In some workshops that use experimental and experimental equipment, it is possible to assign the 7th and 8th category.

Special attention deserves such a qualification as a rolling stock repairman. These specialists work not just with production equipment, machine tools and machines. A rolling stock repairman is engaged in the repair of wagons and locomotives, as well as troubleshooting their parts and eliminating the detected malfunctions.

The tasks that repairmen of industrial equipment, machine tools and other things perform in the course of their professional activities are somewhat different. Their activity is more narrowly focused, focused on the maintenance of machines and mechanisms of a certain type.

Tasks solved by rolling stock repairmen and requirements for them

Those candidates who apply for the position of rolling stock mechanic must be physically strong and have the following knowledge and skills.

The specialist must understand the general principle of the design and manufacture of wagons and locomotives, as well as their individual parts.
It is necessary to have knowledge about the ways and methods of carrying out checks of the serviceability of elements and parts of the rolling stock.
It requires skills to restore parts that have undergone mechanical and physical wear.
The specialist must have knowledge of the purpose and characteristics of liquids intended for flushing and lubricating components and assemblies.

Based on the required knowledge, it is possible to determine the nature of the work and the operations performed by the repairman of the rolling stock.

It is important that a worker involved in the maintenance, repair of locomotives and wagons, their elements must have good eyesight and hearing. And also have flexible hands. Such requirements are formed from the specifics of the work processes performed.

Just like industrial equipment fitters, rolling stock repairers have a degree of qualification, indicated by the corresponding categories.

Tasks solved by mechanics of industrial equipment and requirements for them

The duties of a repairman include the performance of such functions as installation and dismantling, maintenance and repair of parts of mechanisms, their components and assemblies, and the selection of spare parts required for this. In the course of their professional activities, the specialists of this link also perform the processing and sharpening of the necessary parts, and carry out preventive work.

Based on this list of operations performed in the workflow, a list of requirements for candidates for the position of a repairman is formed.

Knowledge of the manufacture and design of serviced equipment.
An understanding of basic kinetics and mechanics is required.
The specialist must have accuracy, patience and responsibility.
The employee must have skills in the selection of lubricating fluids, their purpose and characteristic properties.
The locksmith must have an understanding of the general principles and methods of repairing equipment and its parts and be able to apply this knowledge in practice.

The qualification of repairmen is confirmed by the assigned categories.

Operations performed by locksmiths according to the available ranks

As the employee's qualifications increase, the complexity and responsibility of the processes being performed also increase. According to the unified tariff-qualification guide (ECTS), a repairman has the following job responsibilities.

The list of duties of a locksmith of the 1st category includes operations for fitting threaded connections, preparing parts and mechanisms for repairs, and cleaning them. As well as the preparation of metalwork tools for technical work: cleaning, sharpening and lubrication.

Worker 1st the qualification category must have knowledge of the basics of the operations performed, the names of the tools used, the types of lubricating fluids and their purpose.

Repairman 2nd discharge performs the functions of repair and maintenance of simple mechanisms, assemblies and mechanisms. If it is necessary to carry out work with parts of medium complexity, they are carried out under the supervision of a more qualified employee. It is allowed to perform work with the use of electrical and pneumatic equipment.

The requirements for the workers of this link include knowledge of the basic principles of prefabricated and collapsible operations of assemblies and assemblies, the purpose and methods of using precision measuring instruments, and the physical properties of materials used in the course of work.

Workers of the 3rd category perform operations on locksmith processing of parts, prefabricated and dismantled work of units and assemblies of medium complexity. As well as repair and test work with various mechanisms and elements.

Due to the nature of the tasks performed, such requirements apply to workers in this category as knowledge of the principles of the device and operation of the equipment being repaired. Also technologies for assembly and disassembly operations. The employee must know the physical properties of the materials being treated.

Responsibilities of a 4th category repairman equipment. It implies carrying out installation and dismantling work in the units and assemblies of these mechanisms, commissioning. A repairman of this qualification must draw up defective sheets for equipment. Also, professional duties include the manufacture of devices for repair and installation work.

In accordance with this functionality, a repairman must know the device and principle of operation, the main devices for carrying out repair work, the technology for using precision measuring instruments. The employee must be able to troubleshoot during repairs and maintenance. Possess knowledge in the field of marking parts and skills in adjusting mechanisms.

Responsibilities of a Tier 5 Repairman repair and maintenance of complex equipment and mechanisms in conditions of intense and dense landing. Assembly and dismantling, as well as commissioning for complex units and assemblies. Delivery of the equipment after carrying out the necessary repair operations. Elimination of premature equipment wear.

A locksmith of the 5th category must know and be able, in addition to other basics of plumbing, the technology for adjusting and monitoring the correct installation of equipment. And also have the skills to conduct tests for balancing a static and dynamic nature. It is important that the employee can determine the presence of premature wear of equipment elements and eliminate it using reinforcements and protective coatings.

Professional responsibilities mechanic-repairmen of the 6th and higher categories. At the same time, they apply to complex large-sized and experimental equipment. For example, a repairman of this skill level should be able to work with supercentrifuges, CNC machines, hydraulic and steam-hydraulic presses, and others.

Seventh and eighth qualification category is assigned only when working in those shops that use unique and experimental equipment in their work.

According to the principle described above, as the complexity of the operations performed, qualifications are assigned to rolling stock repairmen.

Bearing Buyers Attention

APPROVE

Director

_____________(_____________)

"____" _____________ 200____

WORKING INSTRUCTIONS

Repairman

(5th category)

1. General Provisions

1.1. A repairman is hired and dismissed from work by order of the director of the enterprise on the proposal of the chief engineer.

1.2. The mechanic-repairman reports directly to the chief engineer.

1.3. In his work, the repairman is guided by:

the Charter of the enterprise;

Labor regulations;

Orders and orders of the director of the enterprise (immediate supervisor);

This work instruction.

1.4. The repairman must know:

design features of repaired equipment, units and machines; technical conditions for repair, assembly, testing and regulation and for the correct installation of equipment, units and machines;

Technological process of repair, assembly and installation of equipment;

rules for testing equipment for static and dynamic balancing of machines;

Geometric constructions with complex markup;

methods for determining premature wear of parts;

Methods for restoring and strengthening worn parts and applying a protective coating;

rules of the internal labor schedule.

2. Characteristics of works.

The repairman is instructed to:

2.1. Repair, installation, dismantling, testing, regulation and adjustment of complex equipment, units and machines and delivery after repair.

2.2. Locksmith processing of parts and assemblies in 6-7 grades.

2.3. Dismantling, repair and assembly of components and equipment in conditions of intense and dense landings.

4. Devices, high pressure gas pipelines - revision, repair and testing.

5. Composite film projection and processing machines - medium repair.

6. Equipment for oxygen and argon open-hearth furnaces - repair, maintenance.

7. Gas blowers - overhaul and testing.

8. Vacuum drying and ironing rollers - repair and adjustment.

9. Gearboxes for semi-automatic lathes - assembly and switching with mutual fitting of splined rollers and gears.

10. Oxygen booster compressors - overhaul.

11. Lifting machines - repair, adjustment and leveling of crane runways.

12. Machines for sorting letters - repairs.

13. Filling machines for open-hearth furnaces - complete repair with replacement of the shaft, adjustment of all mechanisms.

14. Loading machines - revision of the movement and rotation mechanism, disassembly, assembly, alignment and replacement of parts.

15. Automated washing machines - repair and adjustment.

16. Mills, screens, drying drums - overhaul, testing, adjustment and delivery.

17. Hydraulic feed mechanisms of metalworking machines - repair and adjustment.

18. Mechanisms of hydraulic drives of machine tools - repair, assembly, adjustment.

19. Vacuum and fore-vacuum pumps - overhaul.

20. Blast furnaces - installation of an inclined bridge.

21. Reactors - repair.

22. Crane gearboxes of rotary kilns and differential gearboxes of rolling mills - revision, repair.

23. Robots and manipulators with program control with a category of repair complexity up to 20 units. - overhaul, adjustment.

24. Deep drilling rigs - repair.

25. Gear grinding, gear shaping, gear cutting machines with complex curved guides - checking for accuracy.

26. Machine tools with program control - checking for rigidity.

27. Volumetric turbodrills, geared, jet-turbine, high-torque, with precision casting turbines - repair, assembly, installation, regulation, testing.

28. Vacuum evaporators - disassembly, repair, assembly.

29. Cylinders, main and connecting rod bearings - check after running in and final fastening of all connections.

30. Economizers, superheaters, compressor and blower units - overhaul, delivery after testing.

31. Electric and ore-thermal furnaces - checking the alignment of the lifting screws, conveyor and landing of the furnace body on all four columns.

3. Responsibilities

· timely and qualitatively performs assigned work;

undergoes periodic medical examinations in accordance with the established procedure;

undergoes training on labor protection in accordance with the established procedure;

wears special clothes

prepares the workplace and personal protective equipment;

checks the serviceability of equipment, fixtures, tools;

Complies with the requirements of personal hygiene and industrial sanitation;

Complies with the rules for the use of technological equipment, fixtures and tools, methods and techniques for safe work;

immediately notifies the immediate supervisor of all shortcomings found during work;

provides first (pre-medical) assistance to victims of injury, poisoning, in emergency situations and in case of sudden illness;

4. Responsibility

3.1. The mechanic-repairman is brought to disciplinary responsibility in accordance with the current legislation.

3.2. The mechanic-repairman is financially responsible for not ensuring the safety of the material assets entrusted to him. For causing damage to the Employer is liable to the extent determined by the current labor, criminal and civil legislation of the Republic of Belarus.

_____________________

Familiarized with the Instruction: _________ _____________________

(signature) (signature transcript)

At the job description repairman have a lot in common with and . The main thing in all these specialists is maintaining the working condition and repairing various equipment, the same applies to the duties of a repairman.

Job description of a repairman
(Job description of a repairman)

APPROVE
CEO
Surname I.O. ________________
"________"_____________ ____ G.

1. General Provisions

1.1. The mechanic-repairer belongs to the category of workers.
1.2. The mechanic-repairman is appointed to the position and dismissed from it by order of the general director on the proposal of the chief engineer / head of the site.
1.3. The maintenance fitter reports directly to the chief engineer / site manager.
1.4. During the absence of a repairman, his rights and obligations are transferred to another official, which is announced in the order for the organization.
1.5. A person who meets the following requirements is appointed to the position of a mechanic-repairman: primary vocational or secondary vocational education, work experience in the relevant field for at least a year.
1.6. The repairman must know:
- technological processes of manufacturing products;
- kinematic and electrical diagrams of serviced machines;
- device and rules for using complex control and measuring tools and devices;
- design features of universal, special devices and other equipment;
- ways to install the tool;
- enterprise standards and methodological instructions for quality in the part related to its activities.
1.7. The repairman is guided in his work by:
- legislative acts of the Russian Federation;
- Charter of the organization, internal labor regulations, other regulations of the company;
- orders and directives of the management;
- this job description.

2. Job responsibilities of a repairman

The Maintenance Technician performs the following duties:
2.1. Timely repairs the equipment of the production site.
2.2. Carries out scheduled preventive maintenance (PPR) of equipment according to the PPR schedule.
2.3. Identifies the causes of premature wear of equipment, takes measures to prevent and eliminate them.
2.4. Repairs technical equipment and carries out minor repairs of units and mechanisms of machine tools.
2.5. Keeps records of the current equipment (mandrels, fixtures, etc.) and orders spare parts in a timely manner.
2.6. Performs operations related to setting up machines.
2.7. Carefully treats equipment and accessories and maintains it in working condition and cleanliness, does not leave working equipment unattended.

3. Rights of a repairman

The repairman has the right to:
3.1. Require the administration to ensure the rules of labor protection, safety and fire safety.
3.2. Require the provision of overalls in accordance with current regulations.
3.3. Submit proposals for improvement of the work related to the responsibilities provided for in this instruction for consideration by the management.

4. Responsibility of the repairman

The repairman is responsible for:
4.1. For non-performance and / or untimely, negligent performance of their duties.
4.2. For non-compliance with current instructions, orders and orders for the preservation of trade secrets and confidential information.
4.3. For violation of the internal labor regulations, labor discipline, safety and fire safety rules.

JOB INSTRUCTIONS FOR A REPAIR WORKER OF THE 5TH CATEGORATION

I. General provisions

The repairman of the 5th category is directly subordinate to ___________________.
The repairman of the 5th category follows the instructions of ___________________.
The repairman of the 5th category replaces ___________________.
The repairman of the 5th category is replaced by ___________________.
The repairman is appointed to the position and dismissed by the head of the department in agreement with the head of the unit.
Must know:
- design features of the repaired equipment, units and machines;
- specifications for repair, assembly, testing and regulation and for the correct installation of equipment, units and machines;
- technological process of repair, assembly and installation of equipment;
- rules for testing equipment for static and dynamic balancing of machines;
- geometric constructions with complex markings;
- methods for determining premature wear of parts;
- ways to restore and harden worn parts and apply a protective coating.
_________________________________________________________________.

II. Job Responsibilities

Repair, installation, dismantling, testing, regulation and adjustment of complex equipment, units and machines and delivery after repair.
Locksmith processing of parts and assemblies according to 6-7 qualifications.
Dismantling, repair and assembly of components and equipment in conditions of intense and dense landings.
_________________________________________________________________.
_________________________________________________________________.

III. Rights

The repairman has the right to:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties.
control the fulfillment of production tasks, the timely execution of individual orders by subordinate employees.
request and receive the necessary materials and documents related to the issues of its activities and the activities of employees subordinate to it.
interact with other services of the enterprise on production and other issues that are part of its functional duties.
get acquainted with the draft decisions of the management of the enterprise regarding the activities of the Division.
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description.
Submit proposals for the consideration of the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline.
report to the manager on all identified violations and shortcomings in connection with the work performed.
_________________________________________________________________.
_________________________________________________________________.

IV. A responsibility

The Maintenance Technician is responsible for:

improper performance or non-performance of their official duties provided for by this job description - within the limits determined by the labor legislation of Ukraine.
violation of the rules and regulations governing the activities of the enterprise.
When transferring to another job or dismissal, the Repairman is responsible for the proper and timely delivery of cases to the person taking up this position, and in the absence of such, to the person replacing him or directly to his supervisor.
offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
causing material damage - within the limits determined by the current labor and civil legislation of Ukraine.
compliance with current instructions, orders and orders for the preservation of trade secrets and confidential information.
compliance with internal regulations, safety and fire safety rules.
_________________________________________________________________.
_________________________________________________________________.

1.1. The repairman of the 5th category is a worker and reports directly to ……… (name of the position / profession of the manager)

1.2. To work as a repairman of the 5th category, a person is accepted who has mastered the educational programs of secondary vocational education - training programs for skilled workers, basic vocational training programs - vocational training programs for the professions of workers, retraining programs for workers, advanced training programs for workers.

1.3. Performance of work by a repairman of the 5th category at a height of 1.3 m is not allowed.

1.4. The repairman of the 5th category must know:

1) documents, objects, methods and techniques for performing work of a lower qualification, provided for by production (by profession) instructions and (or) professional standard;

2) requirements for the layout and equipment of the workplace;

3) rules for reading drawings;

4) purpose, arrangement of universal devices and rules for the use of metalwork and control and measuring tools;

5) the device and principles of operation of serviced components and mechanisms, equipment, units and machines;

6) basic technical data and characteristics of components and mechanisms, equipment, units and machines;

7) the technological sequence of operations in the diagnosis and control of the technical condition of units and mechanisms, equipment, units and machines of medium complexity;

8) technological sequence of operations when performing:

Fastening works;

adjustment work;

Lubrication works;

9) methods for diagnosing the performance characteristics of complex components and mechanisms, equipment, units and machines;

10) ways to do:

Fastening works;

adjustment work;

Lubrication works;

11) rules and sequence of execution operations:

Disassembly and assembly of assembly units of complex units and mechanisms;

Replacement of complex components and mechanisms;

Adjustment of complex units and mechanisms;

12) methods for diagnosing the technical condition of complex units and mechanisms;

13) special operational requirements for assembly units;

14) requirements for technical documentation of complex components and mechanisms;

15) rules for the operation of equipment, units and machines to maintain the main parameters, technical characteristics;

16) frequency and maintenance procedures for complex equipment, units and machines;

17) rules and procedure for drawing up technical documentation for repair work during maintenance;

18) methods and means of quality control of the work performed;

19) basic mechanical properties of processed materials;

20) typical defects in the performance of metalwork, the reasons for their occurrence and methods of prevention;

21) ways to eliminate defects in the process of performing metalwork;

22) methods of dimensional processing of complex parts;

23) methods and sequence of fitting operations of metalwork processing of complex parts;

24) the main types and causes of marriage during machining, methods of prevention and elimination;

25) signs of a symbol for tolerances, qualifications, roughness parameters, ways of basing blanks;

26) general information about the system of tolerances and fits, qualifications and roughness parameters by qualifications;

27) principles of operation of peeling, table drilling and grinding machines;

28) the technological process of mechanical processing on peeling, table-boring and grinding machines;

29) the purpose, rules and conditions for the use of the most common clamping devices, measuring and cutting tools for the machining of parts on peeling, bench drilling and grinding machines;

30) types and purpose of hand and power tools;

31) purpose, arrangement and rules for the use of control and measuring instruments;

32) rules and sequence of measurements;

33) methods and ways of quality control of performance:

Mechanical processing;

Locksmith processing;

34) labor protection requirements for the maintenance of complex equipment, units and machines;

35) requirements of labor protection when performing:

Works on peeling, table-boring and grinding machines;

locksmith work;

Assembly and dismantling works;

36) ……… (other requirements for the necessary knowledge)

1.5. The mechanic-repairman of the 5th category should be able to:

1) perform work (operations, actions) at lower levels;

2) maintain the condition of the workplace in accordance with the requirements of labor protection, fire, industrial and environmental safety, the rules for organizing the workplace of a locksmith when:

Maintenance;

Locksmith processing;

4) disconnect and de-energize complex components and mechanisms, equipment, units and machines;

5) produce:

Visual control of the wear of components and mechanisms;

Measurements with the help of control and measuring instruments;

Fastening works;

Adjustment work;

Lubrication works;

6) draw up technical documentation for repair work during maintenance;

7) draw up defective statements for the repair of complex equipment, units and machines;

8) prepare assembly units for installation and dismantling;

9) disassemble and assemble assembly units, replace complex components and mechanisms;

10) perform fitting and adjustment of complex components and mechanisms;

11) choose metalwork and mechanized tools and fixtures when performing assembly and dismantling works, for metalwork processing of complex parts;

12) to make simple fixtures for assembly and dismantling works;

13) to make measurements with the help of control and measuring instruments;

14) determine interoperational allowances and tolerances for interoperational dimensions;

15) make markup in accordance with the required technological sequence;

16) to perform felling, straightening, bending, cutting, filing, drilling, countersinking, countersinking, deployment of complex parts in accordance with the required technological sequence;

17) perform scraping, sawing, fitting and fitting, grinding, finishing, polishing;

18) determine the dimensions of parts and assemblies with universal and specialized measuring tools in accordance with the technical documentation;

19) check the compliance of complex parts and assemblies and auxiliary materials with the requirements of technical documentation (maps);

20) install and fix parts and assemblies in clamping fixtures of various types;

21) select and prepare for work cutting and measuring tools, depending on the material being processed;

22) set the optimal processing mode in accordance with the technological map;

23) manage:

peeling machine;

Desktop drilling machine;

sharpening machine;

24) carry out processing in accordance with the technological route;

25) control the quality of work performed when:

Locksmith processing of complex parts using control and measuring tools;

Maintenance of complex equipment, units and machines, installation and dismantling works;

Machining parts with the help of control and measuring tools;

26) carry out maintenance of complex equipment, units and machines in compliance with labor protection requirements;

27) perform:

Work on peeling, table drilling and grinding machines in compliance with labor protection requirements;

Installation and dismantling works in compliance with labor protection requirements;

Locksmith processing in compliance with labor protection requirements;

28) ……… (other requirements for the necessary skills)

1.6. ……… (other general provisions)

2. Labor functions

2.1. The labor functions of a repairman of the 5th category are:

2.1.1. Maintenance and repair of complex parts, assemblies and mechanisms, equipment, assemblies and machines:

1) maintenance of complex components and mechanisms, equipment, units and machines;

2) installation and dismantling of complex components and mechanisms;

3) locksmith processing of complex parts;

4) machining of complex parts and assemblies.

2.1.2. Management of lower-skilled repairmen (category).

2.2. ……… (other functions)

3. Responsibilities

3.1. Before the start of the working day (shift), a 5th category repairman:

1) undergoes a pre-shift (preventive) medical examination in accordance with the established procedure;

2) receives a production order;

3) passes, if necessary, briefing on labor protection;

4) accepts the shift;

5) checks the serviceability of devices, tools, inventory, etc., personal protective equipment;

6) ……… (other duties)

3.2. In the process of work, a repairman of the 5th category:

1) performs the work for which he was instructed and allowed to work;

2) uses overalls, footwear and other personal protective equipment;

3) receives instructions from the immediate supervisor on the performance of the task, safe methods and methods of work;

4) comply with the rules for the use of technological equipment, fixtures and tools, methods and techniques for the safe performance of work;

5) immediately notify the immediate supervisor of all shortcomings found during work;

6) comply with the requirements of personal hygiene and industrial sanitation;

7) ……… (other duties)

3.3. During the working day (shift), a 5th category repairman performs the following duties as part of his labor functions:

3.3.1. As part of the labor function specified in subparagraph 1 of paragraph 2.1.1 of this instruction:

2) analyzes the initial data (technical documentation, assembly, mechanism);

3) carries out diagnostics of the technical condition of complex components and mechanisms, equipment, units and machines;

4) performs adjustment of complex components and mechanisms, equipment, units and machines;

5) performs lubrication work;

6) determines violations in the operation of complex units and mechanisms, equipment, units and machines;

3.3.2. As part of the labor function specified in subparagraph 2 of paragraph 2.1.1 of this instruction:

1) carry out preparatory and final operations and maintenance operations of the workplace;

2) analyzes the initial data (technical documentation, components and mechanisms);

3) carries out diagnostics of the technical condition of complex units and mechanisms;

4) assembles and disassembles assembly units of complex components and mechanisms;

5) carries out the replacement of complex components and mechanisms;

6) performs adjustment of complex units and mechanisms;

7) exercises control over the quality of the work performed.

3.3.3. As part of the labor function specified in subparagraph 3 of paragraph 2.1.1 of this instruction:

1) carry out preparatory and final operations and maintenance operations of the workplace;

2) analyzes the initial data (technical documentation, detail);

3) performs dimensional processing of complex parts;

4) carries out fitting operations of metalwork processing of complex parts;

3.3.4. As part of the labor function specified in subparagraph 4 of paragraph 2.1.1 of this instruction:

1) carry out preparatory and final operations and maintenance operations of the workplace;

2) analyzes the initial data (technical documentation, part, assembly) to maintain the technological process of machining complex parts and assemblies;

3) prepares the machine for machining complex parts and assemblies;

4) performs the technological process of mechanical processing of complex parts and assemblies;

5) exercise control over the quality of the work performed.

3.3.5. As part of the labor function specified in clause 2.1.2 of this instruction:

1) issues shift assignments to repairmen of a lower qualification (category);

2) organizes and coordinates the work of repairmen of a lower qualification (category);

3) gives instructions and explanations on the performance of work to repairmen of a lower qualification (category);

4) carries out quality control of work performed by repairmen of lower qualification (category).

3.4. At the end of the working day (shift), the repairman:

1) brings devices, tools into proper condition, transfers them for storage;

2) removes dirt from overalls and safety shoes, if necessary, places them for drying and storage;

3) submits the established reporting;

4) performs an inspection (self-examination);

5) hand over the shift;

6) ……… (other duties)

4. Rights

4.1. When performing his labor functions and duties, a 5th category repairman has labor rights provided for by the employment contract concluded with the employee, the Internal Labor Regulations, local regulations, the Labor Code of the Russian Federation and other acts of labor legislation.

4.2. ……… (other worker rights provisions)

5. Responsibility

5.1. The repairman of the 5th category is subject to disciplinary liability in accordance with Art. 192 of the Labor Code of the Russian Federation for improper performance through his fault of the duties listed in this instruction.

5.2. The repairman of the 5th category is financially responsible for ensuring the safety of the inventory items entrusted to him.

5.3. A repairman of the 5th category for committing offenses in the course of his activities, depending on their nature and consequences, is brought to civil, administrative and criminal liability in the manner prescribed by law.

5.4. ……… (other liability provisions)

6. Final provisions

6.1. This instruction was developed on the basis of the Professional Standard "", approved by Order of the Ministry of Labor and Social Protection of the Russian Federation of December 26, 2014 N 1164n, taking into account ... ... ... (details of the organization's local regulations)

6.2. Familiarization of the employee with this job description is carried out upon employment (before signing the employment contract).

The fact that the employee is familiarized with this job description is confirmed by ……… (signature on the familiarization sheet, which is an integral part of this instruction (in the journal of familiarization with job descriptions); in a copy of the job description kept by the employer; otherwise)

6.3. ……… (other final provisions).