Full review of ceiling plinths (93 photos). Installation of ceiling plinths: tools and materials, trimming, junction of corners and installation Do-it-yourself installation of ceiling plinths

When the repair comes to the final stage, one of its important aspects is to give the finished appearance to the ceiling. or fillets serve to improve the space connecting the ceiling and walls, they decorate the ceiling, mask irregularities, correct flaws and close gaps.

With the help of a ceiling plinth, you can give the ceiling an elegant look, as well as hide some irregularities between the wall and the ceiling.

The installation of a ceiling plinth allows you to complete the design of the ceiling and gives it an elegant look.

Today there is a huge assortment of different sizes and shapes of fillets, decorated and decorated in different ways. Ceiling plinths are made of polystyrene.

After you have decided on the shape, type and width of the ceiling plinth, you need to measure the perimeter of the room and decide how many fillets are needed. The standard length of the ceiling plinth is 2 meters, but it’s better to always take it with a margin, because unforeseen nuances can happen, and it’s inconvenient to run to the store once again, it’s better to foresee everything in advance. absolutely simple, the whole process can be done by hand, without resorting to the help of qualified craftsmen.

Conditions for installation

Scheme of cutting a baguette at angles using a miter box

It is worth mentioning right away that ceiling plinths are glued to the wall in two ways - on wallpaper, on glue or on putty, before wallpapering. As practice and numerous reviews of people doing repairs show, gluing fillets on wallpaper is preferable and more convenient. For these purposes, Moment Installation glue is ideal, it works reliably and without slips. If, despite the repair, you still have uneven walls, then there will be large gaps between the wall and the fillets, which are quite successfully smeared with the same “Installation” glue, it is white and therefore looks imperceptible. very well produced by means of a sealant, which is called “Acrylic Sealant”. Acrylic is very plastic, does not crack, does not fall out of the cracks and can be painted. Some craftsmen glue the fillet on liquid nails or silicone sealant that cannot be painted, so it is better to opt for acrylic.

You can set a goal and carry out a thorough repair of the walls, aimed at perfect alignment, but it will be easier before pasting the walls with wallpaper, on putty. Putty can even out irregularities and immediately close up all the cracks, and then adjust the wallpaper to the fillets, it will turn out quite well, but everyone must decide for himself which method is preferable for him.

It should not be forgotten that with obvious irregularities and distortions of the walls or ceiling slab, the fillet will only emphasize imperfections, but this rule also works vice versa. The general appearance of the interior and the quality of the repair as a whole depend on how you install the ceiling plinth with your own hands. The installation of a ceiling plinth begins with the corners of the room, because the corners are the most striking when visually inspecting the room. It is necessary to try to use the most solid and long segments of fillets so that the number of joints is minimized. In places where the skirting boards are not very visible, such as corners above doors or the area behind the eaves, you can use the remaining trimmings.

Back to index

Tools for the job

Before work, you should collect all the necessary tools for the smooth procedure for gluing the ceiling plinth.

To work, you will need the following tools:

• miter box;
• medium-sized saw;
• gun for a tube with sealant;
• sandpaper;
• roulette;
• square;
• pencil;
• rubber spatula;
• sharp knife;
• masking tape (optional)
• clean rags.

From the materials you will need:

• fillets;
• finished corners (optional);
• sealant, putty or glue;
• primer for painting.

Back to index

Fillet installation methods

It is necessary to start the process from the corner of the room, making a corner is not such a simple matter as it seems at first glance. If you do not want to bother with the cutting process, then you can buy ready-made ones made of the same material and suitable in pattern and size for your baseboard.

When it comes to corners, the main thing is not to confuse external and internal corners, otherwise you can ruin a lot of material.

To cut corners, you will need a miter box and a small file or a sharp knife. The plinth is inserted into the miter box at an angle of 45 degrees and pressed tightly with your own hands, then you need to cut it off from the right side and at the right angle. Don't confuse inside and outside corners and double check them before final cutting. First, practice on fillet pieces, and if everything works out well, get to work. For convenience, you can lay out the fillets ready for installation along the walls on which they will be installed.

If the plinth is glued to the wallpaper, carefully cover the fillets with glue and press firmly against the wall, remove the remaining glue with a soft, clean cloth, and carefully cover the gaps with glue. If the repair involves the installation of ceiling plinths before wallpapering the walls, then the glue must be replaced with putty. Apply putty to the fillet with a spatula and press firmly against the wall again. Control of the joints, fitting and trimming of fillets can be entirely entrusted to yourself, but the help of a partner will not hurt, the process will go faster.

It is difficult to imagine rooms without a ceiling plinth or fillet - this decorative element has become universal in interiors of any type ...

You can’t save on cornices, it’s not worth it look at cheap options, they will cause a lot of trouble - they crumble, break and easily deform. The material of the cornice should be dense and light. There are high density polyurethane cornices. Polystyrene cornices should be chosen more dense and massive. Design selected depending on the style of the interior.

Surface should be perfectly flat - it is not must be convex or convex. Certainly there are special places with a characteristic roundness- in this case, it is no longer used corner, but a wall cornice, which easily bends. As already noted above for the main cornice needs an even right angle - preferably 90 °.

Stage 1. Preparation and start of work on the installation of fillets

Installation of ceiling fillets requires a careful and responsible approach. First markings are made where the lines of adjacent walls meet. Trimming can be done with special knife- as in the case of trimming the plinth. If there is no 90° angle between adjacent walls, you need to attach a cornice from the side of one wall and make a mark on the ceiling - you also need to make a mark on the other wall. Tags should form cross .

Then, from the intersection point in the direction of the vertical, a cut is made down. First you need to attach one of the mating parts. Then, moving the knife blade vertically down, from the point of intersection of the marks, the part is cut off. Then the same thing is done with another part, only it is applied on another wall - in the end it should turn out neat and even joint . No part should be higher or lower than the other - the match must be exact.

Stage 2. Solution for gluing fillets

For durable and high-quality gluing, you should use ready-made glue for polystyrene foam products. It is sold in containers from 1 to 3 liters. Using a spatula, 10 cm or 8 cm glue is applied to the edges of the cornice and applied to the corner. In order for the cornice to lie flat, you can level it using the rule. If the wall is too long and the first part may dry out before the last one is glued, you need to beat off the line with a coloring cord in advance. It is not necessary to make a line both on the wall and on the ceiling - just choose a more important line.

In some cases it is necessary to beat on the ceiling, and in others - only on the wall, depending on the more uneven side. Ideally, all walls and sides of the eaves should be even. Walls are not always perfectly even - in this case, you need to use visual effects to create the illusion of evenness. For example, in those places where the cornice does not fit snugly, the gap can be puttied - the main thing is that it should not be too large. It is better if the cornice is glued to the minimum layer closely.

After all the joints are puttied, it is necessary to inspect all the joints again, it may be necessary to re-grease some irregularities. After final drying, you can paint the cornice with a brush. After that, the installation of ceiling fillets is almost completed - the color remains.

Stage 3. Painting fillets

The cornice is painted along with the ceiling, as a rule, in one tone, but if necessary you can separate the colors. First, the ceiling is painted, and then, after drying, it is separated with a masking tape - the eaves are stained separately. The same technology is used in the case of the wall - first the wall is stained, and then it is separated with masking tape.

Installation of ceiling fillets

The installation of the so-called ceiling fillets occurs most often at the very end of the repair - it is the fillets that will give the ceiling a finished look and make the ceiling one with the entire space of the room. Can you guess what the main purpose of their installation is? Do you know how the ceiling fillets are installed? If not, we will answer all these and other related questions in the course of our article ...

Let's start with the purpose of this element - as you probably already guessed, the main purpose of installing fillets is to decorate the interior, as well as to hide its defects, to be more precise - cracks and cracks in the ceiling. Almost all modern skirting boards are made from the so-called polystyrene - a large assortment of fillets allows you to choose the most unusual textures, colors and shapes.

The installation of ceiling fillets begins with the selection of suitable skirting boards. To do this, you need to choose the required width and length of the plinth, as well as its shape and texture. How to calculate how many skirting boards are needed in each case? Very simple - just measure the perimeter of the room. What are the most common skirting board sizes? Most often, the ceiling plinth has a standard size - it is two meters. Nevertheless, it is more expedient to purchase a skirting board with a small margin - this is done for the reasons that the installation of ceiling fillets implies surprises and it is better to be ready for them right away. Direct hands are needed to glue the ceiling plinth - installation can be done even without the appropriate experience.

Technique for gluing ceiling plinths

Today, only two ways of fixing fillets are used. The first of these means gluing directly onto wallpaper or glue, and often also on putty. The second is gluing fillets before pasting the walls with wallpaper. Most builders and craftsmen are of the opinion that it is much more convenient to glue fillets directly onto wallpaper pasted over.

What glue to use for gluing fillets? There are many options, but one of the most effective Moment-INSTALLATION - this adhesive allows you to quickly and efficiently fix any ceiling fillet. Very often, after gluing the fillet, gaps still remain between the wall and the plinth - in this case, they can be covered with the same glue, which also has a characteristic white tint. That is why such glue will be invisible on the surface of the ceiling. Installation of ceiling fillets should be carried out only with reliable adhesives. These, in addition to the INSTALLATION Moment, also include AcrylGermet - sometimes it is called completely Acrylic Sealant. What are its merits? Mainly in the fact that this sealant almost never cracks after application, it has the highest level of plasticity - which is why it cannot get out of the cracks, besides it is well painted. It should be noted that many builders glue the baseboard on silgermetic - the latter option cannot be painted. Also, craftsmen often glue the plinth on the so-called liquid nails, which are also not possible to paint. That is why it is better to choose a proven Acrylic Sealant.

Installation of ceiling fillets is almost always required. The latter are always easier to install than to perform a conscientious leveling of the walls, which requires serious preparation and relevant experience from the master during the direct performance of the work. That is why if there is no way to level the walls, then it is better to just stick the fillets even before the wallpaper is pasted over - immediately on the putty. With the help of the latter, it is quite simple to eliminate all kinds of wall defects - including cracks and holes. After such work, you need to start directly fitting the wallpaper to the baseboards. Nevertheless, this method is far from the only one, but perhaps the most convenient and practical of all that you can choose.

It should be noted that if the wall has pronounced defects and unevenness, then the installation of ceiling fillets will only make them even more visible. If the ceiling fillet is mounted beautifully and correctly, then its presence will give the interior of the apartment completeness and high spirit. How to start the installation of fillets? Simple - usually installation starts right from the corner of the room, because they are the first to catch your eye when you enter the room. When fixing skirting boards, it should be taken into account that the total number of joints should be minimal, in addition, if possible, the longest skirting elements should be used. Trimmings are best used in places where attention is not focused, for example, in a corner space - directly above the door or in the area that is directly behind the eaves.

Installation of ceiling fillets involves the use of the following tools:

• Roulette
• Cloth for wiping
• miter box
• Scotch
• Sharp but shallow saw
• Sandpaper
• Spatula type rubber
• Construction square
• Pencil (a marker will do, but it will be more difficult to erase)
• Ground composition
• Ceiling skirting boards
• Adhesive composition
• sealant
• Putty composition

Technique for installing ceiling skirting boards

Installation of ceiling fillets, as mentioned above, starts right from the corner. It should be noted that it is quite difficult to make the right corner without the appropriate experience. That is why it is better to make your life easier and buy ready-made fillet corners - you need to choose corners that will match the color, size and texture of your fillets.

In order to make fillet corners, you need to take a knife and a small miter box. The work is as follows - the fillet is placed in the miter box, the plinth is inserted at an angle of 45 °. Then you need to press the whole sandwich and cut off the excess from the required side according to the required angle. It should be noted that before cutting directly, it is best to practice on segments of the plinth. Also, before cutting, do not confuse the outer and inner corner, respectively.

Step by step guide to installing skirting boards

The installation of ceiling fillets begins only if the ceiling and, accordingly, the walls are already properly primed and plastered. Before sticking the skirting boards, the work surface must be clean and leveled, naturally dried. Installation of fillets should be carried out in a room with a minimum level of humidity - it is good if the air temperature is in the range of 10 to 15 degrees Celsius.

The first step is the preparation of the hermetic composition. To do this, carefully remove the safety plug at the end of the tube with a knife. The released tube is “screwed” into a prepared gun. So that the plinth does not move during the installation process, you need to make a pencil sketch - it is done according to the height of the plinth and along the perimeter of the walls straight from the ceiling. The fillet is fixed in the miter box and carefully cut off until an angle of 45 ° is obtained.

The resulting area must be cleaned with sandpaper. After that, all excess must be removed with a knife. An important point - you need to carefully monitor that the pattern on the plinth matches. There is not much left - the installation of ceiling fillets is almost completed. Next, we make small zigzag notches on the inner side of the skirting board - these cuts are made so that the skirting board has reinforced adhesion to the ceiling and, accordingly, to the wall.

Then the entire sandwich is treated with adhesive on top. Next, you need to, so to speak, raise the fillet to the ceiling - we slowly lead the fillet into a corner, in order to facilitate this work, you need to navigate along the bottom edge and lead it according to pencil marks. It is necessary to attach the plinth to the corner quite deftly - without smearing the fillet and without bending its front part. If the sealant comes out slightly from the edges of the fillet, then it must be removed very quickly with a damp cloth, while paying attention to the adjacent seam - it must be completely sealed.

The next element of the fillet is fixed in this way - a small amount of sealant is applied to the end part and all manipulations are repeated again until the last plinth is inserted. It should be noted that the installation of ceiling fillets at this step implies a change in markings. It is necessary to cut off the corner of the plinth and measure the distance from the end to the extreme corner plinth. Using the method described above, you need to walk along each wall that is in the room, while changing the angle (of course, from inside to outside). Installation of ceiling fillets involves puttying absolutely all joints - such work is done with a rubber spatula. As a result, it is necessary to achieve maximum docking. If it doesn’t work out, then it is allowed to putty several times - until all pronounced joints are hidden. Priming is done at least a day later - otherwise the sealant will not have time to dry completely. Then the painting takes place and thus the installation of the fillets can be considered complete.

At the end, we offer a video on how to install a ceiling fillet with your own hands:

The stretch ceiling in its functional characteristics is somewhat different from the standard ceiling cladding: painting, finishing with plasterboard and ceiling tiles. In the process of installing a stretch ceiling, there are usually no difficulties, however, as a result, a gap is formed, the size of which is standardly 8 millimeters.

There are several ways to solve this problem, which enterprising craftsmen usually resort to:

Unlike the first option, which does not satisfy the owners of the premises in terms of its aesthetic characteristics, ceiling plinths have established themselves as full-fledged decorative elements that cope with their functions. They not only hide surface defects, but also give the interior a harmonious and finished look.

To date, skirting boards made of three materials that are completely different in their characteristics are common.

Skirting boards made of foam plastic can boast only one significant advantage - low cost. However, an attractive price negatively affects the properties of the material, since the foam is brittle, brittle and absolutely not plastic.

Practice shows that the process of gluing foam skirting boards is accompanied by numerous troubles that can be easily eliminated only with proper skills. Beginners in the repair business will only waste time and nerves on troubleshooting.

Polyurethane

Polyurethane skirting seems to be a more reliable option, as it is flexible and durable. This skirting board is indispensable for rooms with curved and rounded walls, the finishing of which usually requires professional craftsmanship.

Among the disadvantages of such products, the high cost is striking. In addition, polyurethane baseboards are not recommended to be attached to the surface of the stretch ceiling, only to the wall. This threatens to sag the lamella.

Plastic

Plastic plinth is an imitation of stucco. In modern stores you can find plastic skirting boards for every taste: in the form of wood, metal, stone, etc. Its versatility makes it the most sought-after type of skirting board.

Given the variety of skirting boards described above, it is important to be well versed in the features of the material and know exactly what you need specifically. To do this, you should arm yourself with a few basic rules that will allow you not to make a mistake when choosing a product.

Skirting boards for stretch ceilings must meet several key requirements.

1. Plinth should not be heavy.
2. Products must have an extensive connection surface with the wall surface.
3. The plinth must be very flexible and durable.

When buying a skirting board, you should pay attention to criteria such as:

• color;
• texture;
• the form;
• material;
• execution style.

Installing a ceiling plinth is quick and easy, as long as you follow the basic tips. Experts insist that there is a secret to achieving the perfect result, and it is simple.

1. For maximum adhesion of the skirting board to the wall, the surface must be carefully prepared: cleaned of dust, dirt, debris. It is important that it be smooth, even and clean, this will ensure the product has a long service life.
2. The shape of the plinth must match the shape of the stretch ceiling.
3. Particular attention should be paid to fasteners, since they often spoil the overall appearance of the structure.
4. If you want to paint the baseboard, it is better to do it in advance by laying the baseboard on the floor. Otherwise, there is a high risk of damaging the stretch ceiling with paint.
5. Stretch ceiling fabrics tend to stretch and narrow, so you should not firmly fix it with a skirting board. Therefore, it is better to attach the product to the wall surface.
6. In the process of gluing the skirting board to the wall, there is a chance that the glue will get on the canvas. To avoid this, close the edges with plastic wrap.

In the event that the corners in the house are 90 degrees, it will be extremely easy to adjust the correct type of ceiling plinth. For this, a miter box is used.

Step 1. We take a miter box and cut two skirting boards that will join in the corner.

Step 2 We apply skirting boards to each other and achieve a satisfying result using a construction blade.

Step 3 We remove the gap to avoid teeth.

Installing a ceiling plinth

Stage 1. We carry out trimming of skirting boards, as described above.

Stage 2. We take the plinth and smear it with special glue. We apply glue in such a way that it is only on that part of the baguette that will be in contact with the wall surface.

Stage 3. We take the plinth, smeared with glue, and carefully apply it to the corner between the ceiling and the wall. This should be done very carefully so as not to damage the canvas.

Stage 4. We press the plinth so that there is a minimum gap between the canvas and the baguette.

Stage 5. Similarly, paste over the room around the perimeter.

Stage 6. Align the plinth.

Stage 7. Remove excess glue. To do this, first use a spatula, and then remove the residue with your finger.

Stage 8. We study the presence of cracks between the surface of the wall and the canvas.

Stage 9. If any are found, fill them with glue.

Stage 10. We clean the baseboard and the wall surface with a brush and water.

Many craftsmen prefer not to dwell on the installation of a plinth for a stretch ceiling. After carrying out the main work, it is also recommended to carry out painting. The technology is quite simple, but requires extreme care and caution.

During the painting process, there is a risk of damaging the stretch ceiling with a brush. Plain paper should be used to avoid such incidents. In other words, we take sheets of A4 format and insert them between the canvas and the baguette. Now the canvas is not in danger.

Some improvisers decide to do with one sheet of paper, alternately applying it to different areas of the work. This is not a rational decision, as it turns against the worker.

Over time, the sheet is so heavily saturated with paint that it begins to show through and stain the canvas. After painting the baseboard, the paper must be removed.

Good luck!

Video - Do-it-yourself installation of skirting boards

Video - Plinth for stretch ceiling

The ceiling plinth is one of the varieties of cornice and is intended for decorating the junction of walls and ceiling in the house. It can have different widths, finishes, be convex or concave.

Do-it-yourself installation of a ceiling plinth will please the eye and help save money by refusing the help of specialists. How this is done and what materials are needed for this process, we describe below.

Tools for gluing ceiling plinth

• Ruler
• Roulette
• Pencil
• construction knife
• Glue (liquid nails)
• glue gun
• Spatula (rubber)

Consumables: ceiling plinth, acrylic sealant, special glue, polyethylene lining (for stretch ceilings).

At each corner take material with a margin of up to 10 cm on both sides.

Getting ready to install the ceiling plinth

• We place the plinth on the floor for now, estimating the best arrangement of the pieces.
• We cut corner joints.
• We check the correctness of the measurements and see if our “puzzle” from the ceiling plinth converges.

When designing skirting boards, try to keep the factory edges. They connect wonderfully without any errors.

First, they take two corner pieces, which are smeared with glue, and glued simultaneously to both the ceiling and the wall. Then lightly press the plinth and wait about a minute. The joints between them do not have to be lubricated with glue.

After completion of the work, it is necessary to seal all the joints of the plinth with the walls and ceiling with a sealant using a rubber spatula.

How to glue a plinth on a stretch ceiling?

For gluing the plinth on the stretch ceiling, very light elements are chosen so as not to weigh down the stretched canvas and not damage it. Glue the plinth with the wide side to the wall. A polyethylene gasket is placed between the ceiling and the plinth, which is removed after installation.

As you can see, you can glue the skirting boards on your own without much effort. It is enough to know only some of the tricks that we have shared with you.

Installation of a ceiling plinth (video):

Today, every consumer pays special attention to the arrangement of his life. And in this matter, even a trifle can play a dominant role.

It would seem, at first glance - a ceiling plinth, what could be special about it, so that a separate article about it. But it allows not only to make the interior of the room unusual, but also makes it possible to hide existing defects, creating and visually leveling an uneven angle between the ceiling and the wall.

Design possibilities of the plinth

Depending on the parameters of the ceiling plinth, you can perform a visual illusion of reducing or increasing the space.

By choosing colors and textures, you can, for example, accentuate the ceiling of a room or vice versa.

Styrofoam skirting boards can be painted in the same shade as the ceiling to get a visual absence of a border, or, conversely, with bright shades to draw the eye precisely to the skirting board when there is such a need.

Proceed with the installation of the plinth should be only after the preparatory work for leveling, puttying and priming the walls and the ceiling itself.

When there are wallpapers on the wall surfaces, they should be glued before installing the skirting boards, otherwise you will then have to bring the wallpaper under the product, and this is already a painstaking procedure. For work, you should stock up with mounting glue, a special gun, a knife, a miter box (they make precise angles), a hacksaw equipped with fine teeth, and acrylic sealant.

Installation process

Glue the foam ceiling plinth, starting from any corner.

So, on the material with the help of a miter box and a hacksaw, it is necessary to bring angles at forty-five degrees. Then glue the surfaces that will be in contact with the wall and ceiling with glue.

It should be borne in mind that with an uneven surface, when gluing, you will have to fix the plinth with something in places of possible sagging.

After fixing the ceiling plinth, all existing joints should be putty, using fine-grained putty for this.

If the work is not done at one time, then the joints should be covered again with putty until they become perfectly even.

All seams between the ceiling, skirting and wall should be filled with acrylic sealant to obtain a perfectly smooth joint without gaps.

And the final touch in the installation of the plinth is painting it with acrylic paint in the desired color scheme.