How to attach PVC blinds to a window. Installation of blinds. How to attach horizontal blinds to look like wood

Before installing blinds on plastic windows, you need, first of all, to acquire a minimum set of necessary tools, and also familiarize yourself with information about how to install them. Blinds help regulate the flow of bright sunlight into the room, as well as protect from prying eyes from the street. But at the same time, they do not interfere with the passage of fresh air through an open window and are very easy to use.

Methods for attaching this type of curtains depend on their design, as well as on the condition of the surface to which they will be attached. They can be installed even without drilling, using double-sided tape or other special fasteners.

What are blinds?

Blinds are one of the types of window curtains, which is a structure made of plates (slats), a special cornice, as well as a mechanism by which control is carried out.

Variety of species

1. Horizontal

Horizontal blinds (Venetian shutters) are a canvas made of thin plates arranged horizontally. They are built into a rotating system of a special drum and a system of cords that sets them in motion. With their help, it is convenient to regulate the level of natural light in the room, so they are appropriate to use on windows in the bedroom, kitchen or bathroom.

The photo shows horizontal blinds in a home interior; they add special charm and comfort to the design of the room.

Horizontal blinds, in addition to standard models, are:

Cassette - this type of curtains has a system in which the lamellas rise up and are hidden in a special box - a cassette. They are compact and take up very little space, so they allow you to make maximum use of the window sill surface.
Inter-frame horizontal blinds are installed between window frames and can only be mounted inside windows that have two independently opening frames, with at least 40 mm between the panes. Therefore, they are installed between wooden window frames, and it is technically impossible to install them inside a sealed double-glazed window.

Inter-frame blinds are controlled using a rope, which is pulled out through pre-drilled holes, which are then covered with a decorative plug

2. Vertical

Vertical blinds consist of a cornice and vertical slats attached to it using holders in the upper part, and connected with a chain in the lower part. They slide apart in both directions thanks to a rotary-sliding mechanism and a cord. More often they are made of fabric impregnated with special compounds, but there are also models made of aluminum or plastic.

Based on the width of the lamellas, they are divided into narrow - 89 mm (American standard) and wide - 127 mm (European standard).

This type of blinds helps to visually expand a narrow room, but for small rooms it is better not to use them, as they take up a lot of space, because they are mounted above the window opening or even on the ceiling

3. Rolled

Roller blinds are a solid canvas that rolls up onto a special shaft when closed, in the form of a roll. They can be mounted either on the ceiling or wall, or on the vertical part of the window opening.

Roller blinds are designed to completely cover the entire window or its individual sashes, so if you need to change the degree of shading during the day, then this option of curtains will not be very convenient

Material of manufacture

The choice of blinds is not limited only to the functionality of the design, but also to the material from which they are made.

Aluminum– lightweight material, not susceptible to temperature changes. Curtains made from it can be placed in rooms with high humidity and dust, but they have a small drawback - noise in the event of a draft. To clean them, you can use a sponge dipped in soapy water or even a vacuum cleaner.

For the manufacture of lamellas, a tape is used from a special bend- and fracture-resistant aluminum alloy with a heat-resistant color coating of acrylic.

Aluminum can be easily painted in different colors, so blinds made from this very practical material can become a bright highlight in a house or apartment.

Textile(cotton, polyester or mixed fabric), after pre-treatment with special compounds, is used for the manufacture of vertical or roller blinds. Depending on the density of the fabric, they can be 100% light-proof and also create light shading, which is why they are best placed in the bedroom, nursery or living room.

Textile blinds can be cleaned dry or wet, but it is still not advisable to hang them in rooms with high levels of humidity and pollution

Tree does not tolerate high humidity, and it is also not advisable to install products made from it next to a radiator, stove or fireplace, as they may become deformed. Wooden structures are made from very thin plates, which undergo preliminary preparation, including lamination.

Thanks to their color scheme, wooden blinds will bring nobility and sophistication to the interior; they should be placed in offices, dining rooms or living rooms

Plastic used for the manufacture of blinds for industrial premises, as it is resistant to most acids and solvents, mineral oils and alkalis. Such products do not absorb odors, they are easy to care for and do not fade in the sun.

Products made from thermoplastic polymer vinyl chloride - plastic, do not accumulate dust and dirt, they are resistant to deformation, as well as temperature changes, therefore blinds made from it always retain their original shape

Mounting options

Before choosing a method for attaching blinds to a window, you must first of all pay attention to the condition of the walls and the design of the window opening, as well as the type of curtains themselves, because each has its own characteristics in fastening.

Main types of fastening:

Inside the window opening;
Overlay;
Separately for each sash;
To the ceiling;
On the wall.

Installing blinds on plastic windows is quite simple, and you can do it yourself without resorting to the services of a specialist. They come with instructions that describe the recommended installation process for this type of curtain. The main thing is to think about whether it will be convenient to open the window for ventilation, and whether constant access to the window sill is needed.

You need to use the blind mount that matches the material of the walls, ceiling and window profile.

Installation using self-tapping screws is considered the most common, simple and reliable.

Installation on plastic windows

Preliminary preparation: measurements and markings

Blinds have a clear geometric shape, so you need to carefully prepare and take the necessary measurements to avoid unnecessary holes and asymmetry. Proper placement of the structure depends on the dimensions of the window opening, as well as the distance between the fasteners. To install it, it is enough to have a screwdriver or screwdriver, a pencil, a tape measure and a level. The height is measured from the mounting location and, of course, an allowance must be made depending on the type of installation.

Inside the window opening, you need to subtract 4 cm from the width of the window opening, and 2 cm from the height, this is so that there is a gap between the curtains and the window so that it opens freely when the blinds are raised.
Outside the window opening (if the window is located in a recess in the wall) - add 10 cm to the width and height of the blinds.
Outside the window opening (the window is on the same plane as the wall) - add 20 cm to the width of the curtains, this will better darken the room, and their height should be no less than the height of the window.
On window sashes, add 3 cm to the width of the blinds so that they do not interfere with the rotation of the window handle.

Proper preparation is the key to comfortable use of this type of curtains, because they must completely cover the glass, slightly extending beyond the frame and not scratch the window sill

Before installing the blinds on the window, you need to make markings and mark the attachment points using a marker and draw a straight line with a pencil along the level. Correct markings must be carried out with extreme precision, because the slightest distortion will ruin the appearance of the window. The main thing is to maintain the optimal distance between the fasteners - symmetrically on all sides.

Experts recommend installing an additional fastener on the side on which the adjusting cord is attached, because that side will bear the heaviest load. After marking, you can install the cornice, to which the slats and runners themselves will be mounted in the future.

Possible options for installing cornices

The cornice is the basis of any blinds and there are several basic ways to install it. When purchasing curtains, the kit always includes installation instructions, which indicate recommended mounting methods.

1. Installation of cornice without drilling

The advantage of this method is that there are no visible holes in the profile, and the blinds can be easily removed without leaving traces of them on the window.

Installation is carried out using special brackets, which are attached to the frame of the plastic window, and the load-bearing part of the blinds is already mounted on them. The brackets are attached to the window sash using double-sided tape or by hooking onto the upper part of the profile.

2. Installing the cornice on the window profile using self-tapping screws

To do this, you need to determine and mark the location of the top bar of the blinds - this will help to avoid displacement of the load-bearing part and the formation of cracks in the profile. Only after this make holes for the screws, and then, and then attach the curtains and screw them with screws.

3. Installation of a cornice with fastening to a wall or ceiling

It is necessary to drill holes 3-4 cm deep in the marked places and insert dowels into them corresponding to the wall material. After that, attach the brackets using screws and insert the cornice into the bracket locks until it clicks (or screw it in).

If the blinds are attached to the ceiling, the vertical distance from the window can be any, and if to the wall, then this distance is limited by the length of the standard bracket - 15 cm

Adjusting the size of blinds

Standard blinds do not always fit window openings in size, and custom-made products are much more expensive than ready-made ones. In order to save money - horizontal blinds can be cut on the sides yourself, and vertical ones can be shortened.

Cutting horizontal blinds to width and height

If horizontal blinds do not match the width or height of the opening, their size can be changed. This process is labor-intensive and requires special tools.

Since designs from different manufacturers have different sizes, sometimes it is necessary to adjust the product to a specific window. To do this, the main thing is to make the correct calculations and all manipulations must be carried out very carefully so as not to spoil the product itself.

In order to change the width of the blinds, you need to cut the slats and cornice themselves, on one or both sides at once. It is better to shorten on the side on which the control mechanism is located.

Step by step trimming process:

Remove the plugs and protective cover from the cornice, and move the control mechanism and cord system to the pin;
Place a mark on one of the slats and, folding all the slats into one multi-layer strip, clamp them with clamps or an elastic band;
Using a hacksaw with fine teeth, saw off the excess along the mark - cornice, lamellas and rail;
Finish the edges with a file or sandpaper;

In order to change the height of horizontal blinds you need:

Open the blinds completely and make a mark at the desired height;
Open the bottom bar and untie the knots on the restrictive cords, then remove the clamps;
Remove excess trims and trim the lace;
Reassemble the structure in reverse order.

Cutting vertical blinds to height and width

In order to adjust the width of the vertical structure, you first need to cut the cornice, but adhering to the basic rule - the cornice should be slightly larger than the window opening.

Step-by-step process for cutting vertical blinds:

In order to trim the cornice, you need to measure the required length with a tape measure and make a mark on the side on which the lifting mechanism is located;
Since there is an aluminum rod and cord inside the cornice, you need to remove the side cover from the cornice using a screwdriver and move the cord to the side so that it does not interfere;
Using a hacksaw, grinder or special file, first make a small cut so as not to damage the lace, and then cut the cornice according to the mark;
Remove excess hooks from the cornice, unfastening them from each other if you need to cut the top with wire cutters;
Shorten the cord by first unscrewing the plug that secures it and removing the end from the cord. After cutting, the plug must be put in place;
To cut the chain - to do this, you need to unfasten the special plastic clasp connecting its edges, take out the outermost ball and cut off the required length, and then fasten the clasp again.

When cutting vertical blinds to width, it is important not to damage the cord during the process of shortening the cornice.

In order to make the slats of vertical blinds shorter you need:

Remove all the plates from the hooks and pull out the bar with the hook eye from each one.
Place all the plates together, perfectly straight, and secure them with an elastic band.
Measure the desired size and make a mark, adding 3-4 cm for the hem.
Cut the slats using scissors.
The edge of each strip must be treated with fire so that the fabric does not fray.
Fold each lamella and make a hole in each for fastening.
Insert the strip into each lamella and secure the ends with glue.

It is very important to make marks with a pencil so that each lamella is the same size, because an error of a few millimeters will create a sloppy effect.

Cutting roller blinds to width and height

To cut a roller blind to width you need:

Unwind the roller blind and pull out the control mechanism along with the fabric weight.
Make a mark at the desired height and carefully cut the fabric with scissors.
The length of the curtain drum should be 1 cm longer, so it needs to be cut with a margin.
Cut the weighting material exactly to the size of the fabric.
Assemble the structure.

Photo instructions for correct cutting of roller blinds to width

It is very easy to change the length of a roller blind; to do this, you just need to remove the bottom curtain rod and cut off the excess, then trim the edges of the curtain and insert the weighting material into place.

Features of fastening curtains depending on the type

All types of blinds have a similar design, which includes slats, latches, brackets, holders (lower cornice) and a mechanism for controlling the product. But at the same time, each type of these curtains has its own installation characteristics.

Installation of vertical blinds

Vertical models are supplied with all the necessary elements for fastening, as well as instructions for their installation. First of all, you need to decide on the place of attachment of this type of curtains - on the wall, ceiling or upper window slope, as well as carry out the correct preparation and marking - this process is described above.

Installation process for vertical blinds:

Make markings for installing the cornice.
Drill holes in the wall and secure the brackets.
Snap the curtain rod into the brackets.
Insert the slats into the cornice - to do this, you need to insert each plate into the corresponding latch until it clicks.
Unfold the lamella runners perpendicular to the cornice.
Insert the slats into the runners.
Attach the weights to the bottom of the slats and connect the weights with a chain.

To attach vertical blinds with a width of more than 1.6 m to the ceiling, you need to install 3 fastening brackets, instead of 2. To do this, you need to place an additional fastening point at a distance of 10 cm from the control cord.

With the help of vertical curtains you can transform the interior, making it elegant

Horizontal blinds can be attached to the wall, in the window opening, or on each sash separately.

Installation of horizontal models

Fix the brackets (fasteners) on the top panel of the blinds.
Attach the curtains to the window and make markings for the top fastening.
Secure the brackets with self-tapping screws and insert the curtain rod until it clicks.
Unfold the secured fabric downwards and mark the points where the lower bar will be attached and install it according to the same principle as the top one.
Attach the adjusting strips.

When installing this type of curtains, it is important to attach the brackets symmetrically to each other, as well as to the window opening

Installation of horizontal cassette blinds

A special feature of the installation of horizontal cassette models is that its box with the mechanism must be mounted on the window frame. Installation of this type of curtains is very simple:

Attach the top strip with the canvas using screws.
Side guides on an adhesive base, glue to the window sash in a vertical position.
Unfold the canvas and adjust the boundaries of the upper and lower positions of the canvas.
Install all accessories.

With the help of this photo instruction you can learn the basic principle of how blinds are attached. Cassette curtains are easy to install yourself and you don’t have to contact an installer

Installation of roller blinds

Roller blinds have the same mechanism as horizontal ones, which is why they are installed in almost the same way. It is more convenient to mount them directly on the window sash, so it will be more convenient to open the window for ventilation. To attach this type of curtain, you need to use special brackets so that the window handle does not protrude from under the curtain.

The photo shows the mechanism for installing open-type roller blinds without drilling

How to install inter-frame blinds

To install interframe blinds you need:

Unscrew the window frame and attach them to the inner sash of the window to check that the sizes of the slats match the size of the glass - ideally, these slats should be a little wider.
Make markings for the holes for the cord and control handle.
Using a drill, make two vertical holes in the window frame - top and bottom.
Secure the brackets.
Route the cord and flexible lead out through the holes.
Secure the blinds using inter-frame brackets.
Connect the control stick to the flexible rod using a clamp.
Close the frame.

Inter-frame blinds require special installation skills, so if they are not available, it is better to contact specialists

Before installing blinds on windows, you need to check whether they will not interfere with the opening of the window, and whether handles, flower pots and other decorative elements will not interfere with opening and closing the blinds, and turning the slats.
When choosing curtains, you need to pay special attention to the material from which they are made, because its performance properties depend on this.
After installation, be sure to check the smooth movement of the sliders, control cord and turning chain - movements should be smooth and without jerking.
Horizontal blinds are the most practical option for curtains, even for those windows for which it would seem impossible to choose curtains.
If you need to adjust the size of curtains for a specific window, then you should add 2-4 cm to all measurements before cutting.

Blinds are a type of curtain that most people consider office, but this is not entirely true. With their help, you can not only protect the room from bright sunlight, but also decorate the design of the room in an original way.

Installing blinds on plastic windows yourself is not difficult if you first read the detailed instructions. Thanks to the variety of materials, designs and colors of this type of curtains, you can choose the most suitable option for any room.

Photo gallery

This video shows various window decoration options using vertical blinds:

When purchasing any product, as a rule, the kit already includes fasteners, but there are exceptions. Our online store offers the purchase of individually reliable components for blinds, allowing you to fix and fasten them in a convenient position. Don’t even try to buy fastenings for blinds in a regular store, they simply don’t deliver them, even to order.
Sometimes brackets break for various reasons. Do not rush to throw away or write off the blinds you already have, they can be purchased at retail, on this site it is profitable and fast, delivery is carried out in a short time. Now let’s look at the fastening methods, since today they exist in various versions.

Attaching blinds to a window

Depending on the configuration of the blinds themselves, they are most often attached to the window, directly to the sash. Roller blinds look quite beautiful and practical, and most importantly neat and beautiful. They come in a box and without it, they are distinguished by a mini, uni and cassette system, with plastic guides for convenient fixation, or in free control. Aluminum horizontal blinds look no worse on the shutter. Moreover, if you purchase magnets to fix their lower part on the sash, there will be no tilting when the window is open.

They can be attached to self-tapping screws on the window sash, you will find them in this online store, as well as to tape without drilling, which is more preferable because the window will not be damaged. Don't assume that regular double-sided tape is being mentioned at this point. You can buy all the necessary fastenings for blinds online, without leaving your home, at any convenient time.

Wall mounting

Vertical blinds are most suitable for this, since they will look ridiculous directly on the window. It is necessary to fasten it over the window opening so that the slats slightly reach the window sill. If you bought a wide roller blind, and they sell similar ones, everything happens according to the same scheme. However, they cost significantly more than all other blinds, this is worth taking into account.

If the house has non-standard light openings, then vertical fabric or plastic blinds are suitable for large windows. It’s easier to replace them, just change the lamellas by ordering on the website you like, specifying the parameters. Anyone, even a woman, can remove old stripes and attach new ones.

Installing blinds on the ceiling

It is used extremely rarely and only if the windows just reach it, i.e. located from ceiling to floor in the house. The spaces above your head can be almost anything, except for a suspended ceiling, because... There are no fasteners for them yet. The most common ceiling mounts for blinds are presented in this online store; you can buy them at retail or wholesale, as is convenient for the customer.

It is most reliable to use steel brackets on both the wall and ceiling; they can withstand the weight even if a cat jumps on the blinds. If the space of the room is small and narrow, a wall-to-wall cornice with vertical blinds or a sheer roller blind will hide this drawback.

Installing blinds on windows is not such a complicated process; you can do it yourself. There are different mounting methods for different types of curtains and each of them has its own installation nuances.

Mounting methods

There are three types of fastening blinds: to the wall, to the ceiling, directly to the frame, and two ways - with and without drilling. The universal basis of any fastening is the cornice, which is attached to the wall, frame or ceiling in different ways.

With drilling

Fastening is carried out using self-tapping screws and brackets on which the cornice and fishing line are installed. Additionally, you will need a pencil, ruler, drill, and screwdriver.

First you need to make markings in the places where the brackets will be located. For reliability and accuracy, it is necessary to drill holes for the clamps in the marked places. Then, applying the brackets one by one to the PVC frame, use a screwdriver to secure them to the markings. Next, the cornice is installed and the entire structure is assembled.

No drilling

If you plan to replace blinds or other window decoration options in the future, it is not recommended to damage plastic windows. The holes from the screws will remain in the frame forever and will significantly spoil the appearance of the windows. In this case, it is easier to turn to a method that does not require drilling.

In this case, the brackets are attached in two ways:

behind the top of the PVC profile on opening sashes(you can simply hang it like a hook);
with double-sided tape, which can be glued without fear of leaving marks.

In general, almost all options are available for balconies. Particular attention should be paid to the type of blinds, since not all of them are universal for different types of windows.

For example, horizontal blinds are not suitable for a balcony with sliding windows, as they can become deformed during use or from strong winds.

The nuances of installing different types of blinds

Horizontal

The light-protective design with horizontal lamellas has become familiar, almost classic for window design. Advantages:

Compactness. Installed directly on the window, leaving the window sill free. This saves space and allows you to place greenery on the window in favorable conditions.
Light weight structure.
Strength and rigidity of the lamellas, preventing deformation.
Fire safety.

Simple control mechanism.
Special coating or impregnation against dust, dirt, odors and grease.
Resistance to humidity and temperature changes.
Various materials for making lamellas: wood, plastic, aluminum, less often fabric.
Easy installation.
Affordable price.

Some disadvantages are worth mentioning:

When mounted on a frame, the angle of inclination is limited window sashes when opening.
The slats produce a characteristic knocking or ringing sound when the wind blows. To avoid this, you need to purchase lower fasteners, which are not included in the kit and quickly become unusable.
The structure is subject to repair in case of severe deformation of several lamellas, but it will cost the same as new blinds.
Not suitable for balconies and loggias with sliding windows.

Vertical

Blinds, as the name already implies, are a simple and convenient light-protective structure consisting of longitudinal vertical plates.

They are distinguished from horizontal ones by:

More aesthetic appearance. Horizontal blinds are more likely to be functional, while vertical blinds are decorative.
Possibility to cover a large area with one cornice. Horizontal blinds, as a rule, consist of narrow slats and are designed for minimalistic decoration of small windows. Vertical models have different widths and easily cover the area of large windows, arches and doorways.
Variety of materials. They can be made of wood fibers, wood, aluminum, bamboo, plastic, woven and non-woven fabric, mirror, blackout, thread. The abundance of materials provides another advantage - variability of colors and textures.
Modern and original window design, opening up more design possibilities.

Simplicity of control mechanisms. Both mechanical and electrical are possible.
Possibility to place photo printing on curtains due to the larger surface area and better material characteristics.
Practicality. Larger slats are easier to wipe when necessary, which occurs infrequently. If, in the event of severe contamination, for example, in a children's room, the slats still need to be subjected to hygienic procedures, this will not take much time - they can be washed by hand and in a washing machine.
Possibility of installation on non-standard windows(triangle, trapezoid, arch, bay window).
The structure is subject to repair. To replace a particular part, you do not need to call a specialist; the repair is simple enough to do it yourself. You can replace the lamellas one at a time without dismantling the entire structure.

Rolled

Roller blinds and roller shutters are solid canvases, often made of textiles, but other materials are also possible that roll up like horizontal blinds.

The height can be adjusted by fixing the curtain with a weighting agent on the bottom strip of the canvas.

There are different types of roller shutters: with an open drum (for mounting directly on the window) and with a decorative cornice; “mini” for installation on each frame separately and “roll-cassette” for covering the entire window.

There is an opinion that roller blinds are the most budget-friendly and practical option for window design, but this is not entirely true.

Of course, roller blinds have their advantages: a variety of natural and synthetic fabrics, colors and patterns, ease of care (wet cleaning is allowed) and operation, the ability to fix the curtain at the desired height, special impregnations against dust, moisture, high temperatures and glare, compatibility with other types of curtains.

A roller blind is convenient if you need to hide a room from the sun, or decorate a window with beautiful tulle so that from the street you cannot see what is happening inside.

But with so many advantages, curtains also have significant disadvantages:

The budget price is a misconception. Yes, a medium-sized curtain itself made from a common material will be inexpensive, but it will look boring. In order for the window design to be complete, it is necessary to consider additional decor, and this increases the cost several times.
Roller blinds in the bedroom, office and rooms with high windows need electrical control. Electric drive designs are expensive, and some manufacturers also produce noise.

It is impossible to make custom-made curtains from certain textiles. You can only choose specific products of a certain brand, since the range of fabrics for the production of roller blinds is very limited: translucent, textured, reflective, perforated, blackout.
The maximum width of roller blinds is 280-300 cm, that is, covering a large area with one cornice, for example, a panoramic window or balcony, will not work.
There may be problems with installation not on the wall, but in the window opening, since the bobbin is wider in width than the curtain itself. There will inevitably be gaps on the sides of the window openings. Ceiling or wall mounting is preferable.

Pleated

This type of blinds is similar to both horizontal and roller blinds. The design consists of a control mechanism (chain or electric drive), weights, and pleated fabric that resembles accordion bellows. The range of materials, colors and textures is very diverse.

Peculiarities:

They close from top to bottom, like classic canvases, from bottom to top, or from both sides at the same time. In this case, the degree of density of the “accordion” can be adjusted, thus closing either the upper, lower, or central part of the window.
Suitable for curtains windows of irregular shape.
The optimal solution for attic rooms, attic, ceiling and inclined windows.
“Opening”, the canvas compactly gathers into a fold and hides inside the cornice.

Convenient for installation on all types of windows and double glazed windows.
Various mounting methods and control mechanisms (manual and electric).
The woven fabric is washable.
The curtain fabric can be made of two types of fabric at the same time, which makes it possible to regulate the degree of transparency, darkness, and sun protection.
Easy installation you can do it yourself.

Species

Classic. In appearance they are most similar to horizontal blinds, however, they can also be vertical. Made from fabric, paper or plastic. Designed to darken the room, protect against heating by the sun's rays, and zone the interior space of the room.

Inclined. A type of pleated specifically for windows that are located at an angle in the attic or ceiling. Their peculiarity is in a specific assembly system, which does not allow the canvas of any material to sag when at an angle. Mostly inclined models are produced with electronic control.

Corrugated. This type is a vertical and horizontal double pleat. As a result, the folds look smoother, neater and denser. Corrugation made of plastic and paper in this design absorbs a significant part of the heat and protects from bright light.

Arched. The most flexible canvases that take any shape, like a paper fan. A good solution for rooms with non-standard window shapes (arches, trapezoids, triangles, sloping windows).

"Day-Night". The fabric of such blinds consists of two layers of fabric: light, light-transmitting fabric for daytime use, and thick, dark fabric for protection from the bright sun during the day and prying eyes in the evening.

Cassette

Such systems involve either the use of horizontal slats or a solid fabric, but are not horizontal blinds or roller blinds.

They differ in the types of cassettes (angular, round, flat), controls (various types of mechanical and remote), and the materials used (plastic, textiles, bamboo, aluminum).

Their main feature is their design, the special structure of which makes it possible to fix the blinds at a minimum distance from the window glass. This prevents deformation, sagging, wrinkles and unevenness, and completely opens the window sill.

Advantages:

Compactness. Cassette blinds take up minimal space, leaving owners the opportunity to use their imagination and organize additional window decoration or leave the window sill as a functional surface.
Simple and clear type of control.
Long service life. Special impregnation protects the canvas from dust, grease, dirt, moisture, and abrasion.
Ease of hygiene procedures. Cassette systems do not require special care. It is enough to wipe their small surface area with a damp sponge and soapy water once every few months.

A variety of designs for interiors in any style.
The tight fit of the canvas to the surface of the glass protects equally well from heat and cold.
Possibility to install the system yourself.
A variety of materials - from light window decoration to total blackout protection.
Possibility to combine blinds with curtains, tulle, lambrequin.

Measurements and tools

The final result depends on how correctly the measurements are taken. Even expensive, beautiful models will not look good on the window if there are gaps in the opening or the edges of the slats constantly ride up against the wall.

It is important to pay attention to the following points:

For the most accurate indicators A steel tape measure and metal screws are used.
The resulting numbers cannot be rounded., accuracy must be maintained down to millimeters.
When ordering blinds The width parameter is indicated first, the length parameter – second.
Not a single standard window opening has absolutely ideal geometric shapes, therefore measurements in height and width must be made at least at two points.